Search Results

Search found 24755 results on 991 pages for 'linux mom'.

Page 370/991 | < Previous Page | 366 367 368 369 370 371 372 373 374 375 376 377  | Next Page >

• System information shown when booting Debian

  - by WebDevHobo

  When booting Debian, you'll see it printing a lot of information about the system variables and such. I don't really need to see all that, so I'd like to modify some scripts to make sure that on boot, it just does what it has to do, without printing it on the screen. Just something I fancy. Offcourse, still seeing errors would be nice. But that long slur of text, I could do without. I've tried looking it up, but I can't find documentation on this specific thing anywhere.

  Read the article

• Does Ubuntu Server have any sort of cron job to automatically clear /tmp?

  - by DWilliams

  I know it clears out /tmp on reboots, but I haven't been able to find any sort of cron job on my server that clears /tmp. I recently set up a script that writes lots of files to /tmp and my server usually goes several months between reboots so I'm concerned about it being cluttered. I've seen several other distros that have a tmpwatch script installed by default. Ubuntu's repository seems to have replaced tmpwatch with tmpreaper. Is there any mechanism in place on Ubuntu (8.04 currently, soon to be upgraded to 10.04 when I get around to it) to clean up temp files on a server that doesn't regularly reboot or do I need to install tmpreaper?

  Read the article

• How to make ssh/rsync/etc use a VLAN network interface?

  - by Annan

  A company I work for has a number of virtual servers with ElasticHosts. They are setup in such a way that eth1 is on a private VLAN connecting them to each other. This is so backups sent between servers are not charged at the same rate as external data transfer. My understanding of how VLANs and network interfaces work is sketchy at best. How can I make ssh, rsync, etc. transfer data through the VLAN? My final solution: I spent a while trying to figure this out, For all servers involved, edit /etc/sysconfig/network-scripts/ifcfg-eth1 DEVICE=eth1 BOOTPROTO=static ONBOOT=yes HWADDR=YOUR_MAC_ADDR IPADDR=192.168.0.100 NETMASK=255.255.255.0 Where HWADDR should already be set and the last octate of IPADDR should be different from each other. Then run, on all servers /etc/init.d/network restart After this the IP addresses specified by IPADDR can be used directly as any other IP address.

  Read the article

• Wpa supplicant suddenly stopped working

  - by Grzenio

  Hi, Recently my wireless stopped working on my Debian testing system. It just doesn't connect. The best I get (only after a reboot) is that it says it did connect, but failed to get IP address. But usually it just tries to connect, disconnects straight away, connects again etc. so it never manages to associate correctly. I am sure it did work about a month ago, stopped working after recent upgrades from the repository. Any ideas how to find the issue and fix it?

  Read the article

• Can enabling a RAID controller's writeback cache harm overall performance?

  - by Nathan O'Sullivan

  I have an 8 drive RAID 10 setup connected to an Adaptec 5805Z, running Centos 5.5 and deadline scheduler. A basic dd read test shows 400mb/sec, and a basic dd write test shows about the same. When I run the two simultaneously, I see the read speed drop to ~5mb/sec while the write speed stays at more or less the same 400mb/sec. The output of iostat -x as you would expect, shows that very few read transactions are being executed while the disk is bombarded with writes. If i turn the controller's writeback cache off, I dont see a 50:50 split but I do see a marked improvement, somewhere around 100mb/s reads and 300mb/s writes. I've also found if I lower the nr_requests setting on the drive's queue (somewhere around 8 seems optimal) I can end up with 150mb/sec reads and 150mb/sec writes; ie. a reduction in total throughput but certainly more suitable for my workload. Is this a real phenomenon? Or is my synthetic test too simplistic? The reason this could happen seems clear enough, when the scheduler switches from reads to writes, it can run heaps of write requests because they all just land in the controllers cache but must be carried out at some point. I would guess the actual disk writes are occuring when the scheduler starts trying to perform reads again, resulting in very few read requests being executed. This seems a reasonable explanation, but it also seems like a massive drawback to using writeback cache on an system with non-trivial write loads. I've been searching for discussions around this all afternoon and found nothing. What am I missing?

  Read the article

• Application (was Firefox) crash on first load on Ubuntu Linux on older Dell Laptop

  - by Ira Baxter

  I've had a Dell Latitude laptop since about 2000 without managing to destroy it. A month ago the Windows 2000 system on it did something stupid to its file system and Windows was completely lost. No point in reinstalling Windows 2000, so I installed an Ubuntu Linux on the laptop. Everything seems normal (installed, rebooted, I can log in, run GnuChess, poke about). ... but ... when I attempt to launch Firefox from the top bar menu icon, I get a bunch of disk activity, the whirling cursor icon goes round a bit and then (WAS: everything stops: icon, mouse. Literally nothing happens for 5 minutes. Ubuntu is dead, as far as I can tell. EDIT : on further investigation, spinning icon, mouse operated by touchpad freeze. There's apparantly a little disk activity occuring about every 5 seconds. I wait 5-10 minutes, behavior doesn't change) A reboot, and I can repeat this reliably. So on the face of it, everything works but Firefox. That seems really strange. The only odd thing about this system when Firefox is booting is that while it has an Ethernet port (that worked fine under Windows), it isn't actually plugged into an Ethernet. As this is the first Firefox boot since the Ubuntu install, maybe Firefox mishandles Internet access? Why would that crash Ubuntu? (I need to go try the obvious experiment of plugging it in). EDIT: I tried to run the Disk manager tool, not that I cared what it was, just a menu-available application. It started up like Firefox, I get a little tag in the lower left saying Disk P*** something had started, and then the same behavior as Firefox. At this point, I don't think its the Ethernet. Is it possible that the Ubuntu disk driver can't handle the disk controller in this older laptop? The install seemed to go fine.

  Read the article

• Unattended Kickstart Install

  - by Eric

  I've looked around quite a bit and have seen similar setup and questions, but none seem to work for me. I'm using the following command to create a custom ISO: /usr/bin/livecd-creator --config=/usr/share/livecd-tools/test.ks --fslabel=TestAppliance --cache=/var/cache/live This works great and it creates the ISO with all of the packages and configs I want on it. My issue is that I want the install to be unattended. However, every time I start the CD, it asks for all of the info such as keyboard, time zone, root password, etc. These are my basic settings I have in my kickstart script prior to the packages section. cdrom install autopart autostep xconfig --startxonboot rootpw testpassword lang en_US.UTF-8 keyboard us timezone --utc America/New_York auth --useshadow --enablemd5 selinux --disabled services --enabled=iptables,rsyslog,sshd,ntpd,NetworkManager,network --disabled=sendmail,cups,firstboot,ip6tables clearpart --all So after looking around, I was told that I need to modify my isolinux.cfg file to either do "ks=http://X.X.X.X/location/to/test.ks" or "ks=cdrom:/test.ks". I've tried both methods and it still forces me to go through the install process. When I tail the apache logs on the server, I see that the ISO never even tries to get the file. Below are the exact syntax I'm trying on my isolinux.cfg file. label http menu label HTTP kernel vmlinuz0 append initrd=initrd0.img ks=http://192.168.56.101/files/test.ks ksdevice=eth0 label localks menu label LocalKS kernel vmlinuz0 append initrd=initrd0.img ks=cdrom:/test.ks label install0 menu label Install kernel vmlinuz0 append initrd=initrd0.img root=live:CDLABEL=PerimeterAppliance rootfstype=auto ro liveimg liveinst noswap rd_NO_LUKS rd_NO_MD rd_NO_DM menu default EOF_boot_menu The first 2 give me a "dracut: fatal: no or empty root=" error until I give it a root= option and then it just skips the kickstart completely. The last one is my default option that works fine, but just requires a lot of user input. Any help would be greatly appreciated.

  Read the article

• Should I be worry about max number of files in a folder in *NIX filesystems?

  - by ??????

  In a social networking project we want to store user's avatars in a folder. I think in one year or two it'll reach to 140K (I've seen this issue before and it will be around this number). I want to spread files in folders. If a folder contains 1000 files then create another folder and do store files from 1001 to 2000. Is this a good approach or I'm just very cautious about the issue? (File system : EXT3)

  Read the article

• Bacula Director and Storage in LAN

  - by B14D3

  I have two networks LAN and DMZ.. Machines in DMZ are accesible from internet ( only over http). In LAN I have servers that see all LAN and all DMZ machines but machinse from DMZ don't see any LAN servers. Machines in LAN have access only to all LAN and DMZ, no direct access to internet and no access from internet. DMZ <------ LAN DMZ ----X--->LAN I'm planning to configure Bacula as major backup system. My plan is to install Bacula Director and Storage deamon on the same server in LAN for safety reasons. So my question is: Will this configuration work, is it posible for bacula director and storage deamon installed on server in LAN to makes backup servers that are in my DMZ? Or in this network configuration Bacula should be in DMZ? (If yes will I can backup with it servers in LAN ?)

  Read the article

• Basic clarification about Limited FTP/sFTP users

  - by mattewre

  I would like to get some clarification about the correct way to create limited users to access to my VPS user as WEBSERVER with Nginix. I'm used to NOT install FTP and access via SFTP only. It is ok for every set up? this is what I usually do from to create a limited user called "admin" that should be able to have access via SFTP to the folder with the website data mkdir -p /var/www/mysite.com/ adduser admin adduser admin www-data chown -R root:root /var/www chmod -R 755 /var/www chmod -R 755 /var/www/mysite.com chown -R admin:www-data /var/www/mysite.com/ It seems not to be the correct way, I always have problems with permission when I upload some files (for example with Wordpress in general). I would like to create an user that does work exactly as the one that the "provides" give to their client when they buy an Hosting service (that is a FTP, I would prefer SFTP access). It is for personal user, but I think that a limited user is a lot safer to use then the "root" via SFTP.

  Read the article

• Installing Apache to CentOs 5.7 (problems with repo)

  - by C.S.Putra

  I'm installing Apache on CentOS 5.7, I followed instructions here : http://www.if-not-true-then-false.com/2010/install-apache-php-on-fedora-centos-red-hat-rhel/ I've installed this also : Remi Dependency on CentOS 5 and Red Hat (RHEL) 5 ## rpm -Uvh http://download.fedora.redhat.com/pub/epel/5/i386/epel-release-5-4.noarch.rpm When I install this, there's warning: /var/tmp/rpm-xfer.Bqu2xo: Header V3 DSA signature: NOKEY, key ID 217521f6 But it says that the package is alread installed. Then I move on to 3rd steps: yum --enablerepo=remi install httpd php php-common But it says: error getting repository data for remi, repository not found. Why is it like that?

  Read the article

• p2v v2v v2p tool from open source?

  - by neolix

  we have centos, fedora, ubuntu server and desktop we are looking for good open source tool for p2v v2v v2p and we are not using vmware here only we use xen or kvm. Same of the server shifted to new hardware and same of the server on xen or kvm. Can same help me !!

  Read the article

• Can I view the Unix permissions of a file in a .zip archive?

  - by Bernhard V

  Hi, is there a way to view the Unix permissions for a file under Windows?

  Read the article

• Kernel Memory Leak in Ubuntu 9.10?

  - by kayahr

  After some days of work (Using suspend-to-ram during the night) I notice I loose more and more available memory. Even when I close all applications the situation doesn't improve. I even went down to the command line and closed ALL running processes except the init process and the bash I'm working in. I unmounted all these ram disks which Ubuntu is using, I even unloaded all modules which could be unloaded. But still "free" tells me that 1 GB of RAM is used (without buffers/cache). In "top" there is no visible process which occupies all this memory. The only way to free the memory is restarting the machine. How can I find out where I lose all this memory? Is there a known "suspect" who can cause a problem like this? I'm using Ubuntu 9.10 64 bit on a Dell Latitude E6500 (4 GB RAM) with the latest closed-source nvidia driver and Gnome with Compiz. The applications I use most of the time are firefox and eclipse. Any hints how I can find the problem? I'm not a kernel hacker so if the solution is patching the kernel or something like that then I might be out of the game...

  Read the article

• Amazon EC2 tools for Debian?

  - by Jonik

  What is the recommended way of getting command-line Amazon EC2 tools on Debian? So, basically the same as this question, but for EC2 instead of S3. Ubuntu has ec2-ami-tools and ec2-api-tools, but I couldn't find equivalent packages for Debian. A blog post titled "Install EC2 AMI & API tools in Debian" talks about installing Amazon's packages outside package management, but that seems a little clumsy.

  Read the article

• MySQL Master - Master Broken

  - by Recc

  I've Inherited a Mysql master master system, I've noticed the second master (lets call it slave from now on as it's running on a 'slave' machine) stopped getting its db's updated. I saw that Master: Slave_IO_Running: Yes Slave_SQL_Running: Yes Slave: (with an error I truncated) Slave_IO_Running: Yes Slave_SQL_Running: No Last_Errno: 1062 Last_Error: Error 'Duplicate entry '3' for key 'PRIMARY'' on [...] I don't know what caused it to process considering we cant get duplicate there. What's important is to resume normal operations; Right now I've stop slave; on the Master and stop slave; on the Slave because I saw that if I change records on the Slave the changes Do Get Propagated to Master which is in active use. How do I: Force sync EVERYTHING from master to slave without affecting data on master? Then hopefully have slave pickup replication as usual? UPDATE OK I Tried deleting all tables on slave then it complained in that error section that the 'table' doesnt exist. So i made a no data dump of Master, and made sure I have only empty tables in Secondary (slave). I start slave; on slave BUT now it's complaining about bloody alter table statements for instance: Last_Errno: 1060 Last_Error: Error 'Duplicate column name [...] Query: 'ALTER TABLE [...] How to skip the fracking alter statements I just want to replicate the bloody data and be done with it, my tables have the lates changes already FFS and now its complaining about changes made after the replication seized weeks ago How do I reset the log or something? OUTSTANDING Why would this start happening? The "Secondary" is propagating to "Primary". "Primary" is not propagating to "Secondary". But any fixes I tried to do left it in the same state Yes-Yes Yes-No with same Last_Error. I think around that time the server was taken off the network, could that confuse MySQL in some way?

  Read the article

• How can I check whether a volume is mounted where it is supposed to be using Python?

  - by Ben Hymers

  I've got a backup script written in Python which creates the destination directory before copying the source directory to it. I've configured it to use /external-backup as the destination, which is where I mount an external hard drive. I just ran the script without the hard drive being turned on (or being mounted) and found that it was working as normal, albeit making a backup on the internal hard drive, which has nowhere near enough space to back itself up. My question is: how can I check whether the volume is mounted in the right place before writing to it? If I can detect that /external-backup isn't mounted, I can prevent writing to it. The bonus question is why was this allowed, when the OS knows that directory is supposed to live on another device, and what would happen to the data (on the internal hard drive) should I later mount that device (the external hard drive)? Clearly there can't be two copies on different devices at the same path! Thanks in advance!

  Read the article

• ubuntu: kept old menu.lst, think it is the source of problems

  - by Dan

  I recently upgraded to karmic, and clicked to keep my old menu.lst (to keep my windows XP boot info)... but now I'm not using the right kernel. Is there a way to have it give me the correct up to date menu.lst file again which I can manually merge into my old file? Thanks, Dan

  Read the article

• GDM login screen is not displayed with VNC

  - by niboshi

  Hi, I set up VNC server with xinetd. Also configured GDM so that XDMCP is enabled. VNC connection seems okay, but GDM login screen is not shown. Instead I can only see old bare X screen (gray meshed background and X-shaped mouse pointer), which I can't do any interaction with it. What can I do to fix the problem? No log is written below /var/log/. Server distribution: Ubuntu marverick /etc/xinetd.d/vnc is like below: service vnc1024 { disable = no socket_type = stream protocol = tcp wait = no user = nobody server = /usr/bin/Xvnc server_args = -inetd -query localhost -geometry 1024x768 -depth 24 -once securitytypes=none port = 12345 } /etc/gdm/custom.conf: [daemon] [security] DisallowTCP=false [xdmcp] Enable=true [gui] [greeter] [chooser] [debug] [servers] /etc/services is also configured. Thanks

  Read the article

• Ubuntu won't boot from USB memory stick

  - by mackenir

  I used the instructions on this webpage to create a bootable USB drive for running Ubuntu 9.10. Unfortunately it doesn't work on my EeePC. Even with 'Removable Dev.' selected in the BIOS as the first boot device, the PC just boots into Windows 7. How do I troubleshoot this problem? The drive is readable and looks like this: Directory of E:\ 28/10/2009 21:14 <DIR> .disk 28/10/2009 21:14 222 README.diskdefines 28/10/2009 21:14 143 autorun.inf 28/10/2009 21:14 <DIR> casper 28/10/2009 21:14 <DIR> dists 28/10/2009 21:14 <DIR> install 28/10/2009 21:14 <DIR> syslinux 28/10/2009 21:14 4,098 md5sum.txt 28/10/2009 21:14 <DIR> pics 28/10/2009 21:14 <DIR> pool 28/10/2009 21:14 <DIR> preseed 28/10/2009 21:14 0 ubuntu 26/10/2009 16:16 1,468,640 wubi.exe 25/02/2010 00:28 2,147,483,648 casper-rw 8 Dir(s) 5,290,307,584 bytes free

  Read the article

• Can I nohup/screen an already-started process?

  - by ojrac

  I'm doing some test-runs of long-running data migration scripts, over SSH. Let's say I start running a script around 4 PM; now, 6 PM rolls around, and I'm cursing myself for not doing this all in screen. Is there any way to "retroactively" nohup a process, or do I need to leave my computer online all night? If it's not possible to attach screen to/nohup a process I've already started, then why? Something to do with how parent/child proceses interact? (I won't accept a "no" answer that doesn't at least address the question of 'why' -- sorry ;) )

  Read the article

• DRBD not syncing between my nodes when IP is reset

  - by ramdaz

  I am trying to setup DRBD by following the article at http://www.howtoforge.com/setting-up-network-raid1-with-drbd-on-ubuntu-11.10-p2 I am using Ubuntu 10.04 DRBD - 8.3.11 In the first run I had everything working perfectly and when shifting the systems to a production environment I decided to restart the Meta Data creation part and start from scratch. The IPs had changed entirely in the production environment. Issuing drdbadm create-md r0 in both the servers runs successfully. But when I do "drbdadm -- --overwrite-data-of-peer primary all" on the primary it fails to start the re sync. My config file is as given below resource r0 { protocol C; syncer { rate 50M; } startup { wfc-timeout 15; degr-wfc-timeout 60; } net { cram-hmac-alg sha1; shared-secret "aklsadkjlhdbskjndsf8738734jkfkjfkjf"; } on primaryds { device /dev/drbd0; disk /dev/md2; address 172.16.7.1:7788; meta-disk internal; } on secondaryds { device /dev/drbd0; disk /dev/md2; address 172.16.7.3:7788; meta-disk internal; } } Status on primary root at primaryds:~# cat /proc/drbd version: 8.3.7 (api:88/proto:86-91) GIT-hash: ea9e28dbff98e331a62bcbcc63a6135808fe2917 build by root at primaryds, 2012-05-12 15:08:01 0: cs:WFBitMapS ro:Primary/Secondary ds:UpToDate/Inconsistent C r---- ns:0 nr:0 dw:0 dr:200 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:b oos:5690352828 Status on secondary root at secondaryds:/etc/drbd.d# cat /proc/drbd version: 8.3.7 (api:88/proto:86-91) GIT-hash: ea9e28dbff98e331a62bcbcc63a6135808fe2917 build by root at secondaryds, 2012-05-12 15:25:25 0: cs:WFBitMapT ro:Secondary/Primary ds:Inconsistent/UpToDate C r---- ns:0 nr:0 dw:0 dr:0 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:b oos:5690352828 Log of Primary May 30 13:42:23 primaryds kernel: [ 1584.057076] block drbd0: role( Secondary -> Primary ) disk( Inconsistent -> UpToDate ) May 30 13:42:23 primaryds kernel: [ 1584.086264] block drbd0: Forced to consider local data as UpToDate! May 30 13:42:23 primaryds kernel: [ 1584.086303] block drbd0: Creating new current UUID May 30 13:42:26 primaryds kernel: [ 1586.405551] block drbd0: drbd_sync_handshake: May 30 13:42:26 primaryds kernel: [ 1586.405564] block drbd0: self E8A075F378173D4B:0000000000000004:0000000000000000:0000000000000000 bits:1422588207 flags:0 May 30 13:42:26 primaryds kernel: [ 1586.405574] block drbd0: peer 0000000000000004:0000000000000000:0000000000000000:0000000000000000 bits:1422588207 flags:0 May 30 13:42:26 primaryds kernel: [ 1586.405582] block drbd0: uuid_compare()=2 by rule 30 May 30 13:42:26 primaryds kernel: [ 1586.405587] block drbd0: Becoming sync source due to disk states. May 30 13:42:26 primaryds kernel: [ 1586.405592] block drbd0: Writing the whole bitmap, full sync required after drbd_sync_handshake. May 30 13:42:27 primaryds kernel: [ 1588.171638] block drbd0: 5427 GB (1422588207 bits) marked out-of-sync by on disk bit-map. May 30 13:42:27 primaryds kernel: [ 1588.172769] block drbd0: conn( Connected -> WFBitMapS ) Log in Secondary May 30 13:42:24 secondaryds kernel: [ 1563.304894] block drbd0: peer( Secondary - Primary ) pdsk( Inconsistent - UpToDate ) May 30 13:42:24 secondaryds kernel: [ 1563.339674] block drbd0: drbd_sync_handshake: May 30 13:42:24 secondaryds kernel: [ 1563.339685] block drbd0: self 0000000000000004:0000000000000000:0000000000000000:0000000000000000 bits:1422588207 flags:0 May 30 13:42:24 secondaryds kernel: [ 1563.339695] block drbd0: peer E8A075F378173D4B:0000000000000004:0000000000000000:0000000000000000 bits:1422588207 flags:0 May 30 13:42:24 secondaryds kernel: [ 1563.339703] block drbd0: uuid_compare()=-2 by rule 20 May 30 13:42:24 secondaryds kernel: [ 1563.339709] block drbd0: Becoming sync target due to disk states. May 30 13:42:24 secondaryds kernel: [ 1563.339714] block drbd0: Writing the whole bitmap, full sync required after drbd_sync_handshake. May 30 13:42:26 secondaryds kernel: [ 1565.652342] block drbd0: 5427 GB (1422588207 bits) marked out-of-sync by on disk bit-map. May 30 13:42:26 secondaryds kernel: [ 1565.652965] block drbd0: conn( Connected - WFBitMapT ) The serves are not responding once it reaches this stage. Tried redoing it couple of time but noting happens. Why could the resync not be taking place? I would like some advice? Directions?

  Read the article

• Install grub on 2nd hard drive

  - by jldupont

  I have 2 HDs in my machine: Drive 1 with grub and my Windows XP OS Drive 2 with only Ubuntu 9.04 I would like to be able to boot directly from drive 2. I am missing grub on drive 2... how do I add it? EDIT: I ended up reinstalling the whole OS.

  Read the article

• How do I burn Xubuntu Live CD

  - by Julian

  I downloaded the 600+ MB Xubunto ISO. Burnt it to a DVD using Nero Burning Rom, as a Bootable DVD. My bootup sequence won't detect XUbuntu and still only detects windows on my Hard Drive even after I set my BIOS to boot from the CDROM first. How do I burn the Live CD with Nero? I'm thinking maybe I should extract the contents and then burn the folder as data to my DVD. P.S: I only have DVDs lying around.

  Read the article

• Transmission-daemon not picking up on watch directory

  - by Mild Fuzz

  Trying to get my transmission-daemon to pick up files from a dropbox folder, to make remote starting easier (it's a headless system). As far as I can tell, the settings.json file is as expected, but none of the files I place in the folder get picked up. I have checked that dropbox is syncing correctly. Here is the whole settings.json file, but the relevant lines are included below: "watch-dir": "/home/john/Dropbox/torrents", "watch-dir-enabled": true Update It appears to be a permissions issue. From /var/log/syslog: Unable to watch "/home/john/Dropbox/torrents": Permission denied (watch.c:79) I have tried stopping the daemon - sudo service transmission-daemon stop - changing permissions of folder using chown - sudo chown -R john /home/john/Dropbox/torrents - restarting daemon - sudo service transmission-daemon start Same result, however Update 2 Permissions for the folder are: drwsrwsrwx 2 john debian-transmission 4096 2012-04-09 19:40

  Read the article

< Previous Page | 366 367 368 369 370 371 372 373 374 375 376 377  | Next Page >