Search Results

Search found 34341 results on 1374 pages for 'link local'.

Page 371/1374 | < Previous Page | 367 368 369 370 371 372 373 374 375 376 377 378  | Next Page >

• Second network card configuration not working.

  - by Sebas

  I have 4 servers running Centos 5. All of them have two ethernet network cards. I have configured 192.168.1.x IP addresses on their eth0 card. They are all connected to the same switch using their eth0 card and they are all working. I have configured 10.72.11.x IP addresses on their eth1 card.They are all connected to the same switch - a different one from the switch used with eth0 card - using their eth1 card and they are NOT all working. Their configuration files is like: DEVICE=eth1 BOOTPROTO=static IPADDR=10.72.11.236 BROADCAST=10.72.11.191 NETMASK=255.255.255.192 NETWORK=10.72.11.128 HWADDR=84:2B:2B:55:4B:98 IPV6INIT=yes IPV6_AUTOCONF=yes ONBOOT=yes The interfase is starting and configured as I need. [root@sql1 network-scripts]# ifconfig eth0 Link encap:Ethernet HWaddr 84:2B:2B:55:4B:97 inet addr:192.168.1.105 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::862b:2bff:fe55:4b97/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2981 errors:0 dropped:0 overruns:0 frame:0 TX packets:319 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:386809 (377.7 KiB) TX bytes:66134 (64.5 KiB) Interrupt:36 Memory:da000000-da012800 eth1 Link encap:Ethernet HWaddr 84:2B:2B:55:4B:98 inet addr:10.72.11.236 Bcast:10.72.11.191 Mask:255.255.255.192 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Interrupt:48 Memory:dc000000-dc012800 I also added a route-eth1 file that looks like: 10.0.0.0/8 via 10.72.11.254 Routing looks fine to me: [root@sql1 network-scripts]# netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 10.72.11.192 0.0.0.0 255.255.255.192 U 0 0 0 eth1 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1 10.0.0.0 10.72.11.254 255.0.0.0 UG 0 0 0 eth1 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0 But I cannot ping one server from the other. [root@sql1 network-scripts]# ping 10.72.11.235 PING 10.72.11.235 (10.72.11.235) 56(84) bytes of data. From 10.72.11.236 icmp_seq=1 Destination Host Unreachable From 10.72.11.236 icmp_seq=2 Destination Host Unreachable From 10.72.11.236 icmp_seq=3 Destination Host Unreachable From 10.72.11.236 icmp_seq=4 Destination Host Unreachable From 10.72.11.236 icmp_seq=5 Destination Host Unreachable From 10.72.11.236 icmp_seq=6 Destination Host Unreachable ^C --- 10.72.11.235 ping statistics --- 7 packets transmitted, 0 received, +6 errors, 100% packet loss, time 6033ms , pipe 3 What am I doing wrong?

  Read the article

• WMV file won't play in Windows Media Player

  - by user1053768

  I have a .wmv file I uploaded to my website. When I click the link to the video, the video plays in Windows Media Player without any problems. However, on some systems when the user clicks the link, Windows Media Player gives them the error: Window Media Player cannot play the file. The player might not support the file type or might not support the codec that was used to compress the file All I did was copy the video to the server and store the URL in a database. Why are users getting this error? How can I fix it?

  Read the article

• IIS cannot access itself

  - by dave

  We are on a corporate network that uses ISA and I am having issues trying to not have requests go through ISA. I have IIS7 on my local Windows 7 machine that has websites and a service layer. The websites access the service layer using a xxxx.servicelayer.local address that is set up in my HOSTS file to point to 127.0.0.1. I have Windows Firewall client which I have disabled. I have tried both adding this address into IE so that it does not go through ISA and also disabled this section altogether. When the website (which is actually IIS making the request to itself) tries to access the service layer I receive an ISA error that proxy authentication has failed. Considering that everything I can see to configure is set to not go through the proxy, ISA, I cannot see how this is actually going through the proxy and giving this error. Is there something within Windows 7 that forces the proxy setting, some sort of caching or similar?

  Read the article

• Links opened by left-click in IE8 take forever compared to middle-mouse button

  - by Bigbio2002

  When I use the middle mouse button to open a link in a new tab, it works instantly. However, if I left-click the link to open it normally, IE8 freezes for about 5 seconds before the popup window opens. I'm sick of all the slowness and the glitchiness and the memory hogging, and I just want it to work as well as all the other browsers out there. Anybody else experiencing this and have any tips? Note: It's not the Java SSV helper or the Skype addon (because I have those disabled). I'm looking for some advanced solutions that I can try. (God, I hate IE8, but I'm a loyal Microsoft follower so I refuse to switch to Firefox. )

  Read the article

• Varnish server in front of nginx server with multiple virtualhosts

  - by Garreth 00

  I have tried to search for a solution for this, but can't find any documentation/tips on my specific setup. My setup: Backendserver: ngnix: 2 different websites (2 top domains) in virtualenv, running gunicorn/python/django Backendserver hardware(VPS) 2gb ram, 8 CPU Databaseserver: postgresql - pg_bouncer Backendserver hardware (VPS) 1gb ram, 8 CPU Varnishserver: only running varnish Varnishserver hardware (VPS) 1gb ram, 8 CPU I'm trying to set up a varnish server to handle rare spike in traffic (20 000 unique req/s) The spike happens when a tv program mention one of the sites. What do I need to do, to make the varnish server cache both sites/domains on my backendserver? My /etc/varnish/default.vcl : backend django_backend { .host = "local.backendserver.com"; .port = "8080"; } My /usr/local/nginx/site-avaible/domain1.com upstream gunicorn_domain1 { server unix:/home/<USER>/.virtualenvs/<DOMAIN1>/<APP1>/run/gunicorn.sock fail_timeout=0; } server { listen 80; listen 8080; server_name domain1.com; rewrite ^ http://www.domains.com$request_uri? permanent; } server { listen 80 default_server; listen 8080; client_max_body_size 4G; server_name www.domain1.com; keepalive_timeout 5; # path for static files root /home/<USER>/<APP>-media/; location / { proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_redirect off; if (!-f $request_filename) { proxy_pass http://gunicorn_domain1; break; } } } My /usr/local/nginx/site-avaible/domain2.com upstream gunicorn_domain2 { server unix:/home/<USER>/.virtualenvs/<DOMAIN2>/<APP2>/run/gunicorn.sock fail_timeout=0; } server { listen 80; listen 8080; server_name domain2.com; rewrite ^ http://www.domains.com$request_uri? permanent; } server { listen 80; listen 8080; client_max_body_size 4G; server_name www.domain2.com; keepalive_timeout 5; # path for static files root /home/<USER>/<APP>-media/; location / { proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_redirect off; if (!-f $request_filename) { proxy_pass http://gunicorn_domain2; break; } } } Right now, If I try the Ip of the varnishserver I only get served domain1.com. Would everything be correct if I change the DNS of the two domain to point to the varnishserver, or is there extra setup before it would work? Question 2: Do I need a dedicated server for varnish, or could I just install varnish on my backendserver, or would the server run out of memory quick?

  Read the article

• How should I troubleshoot a problematic wireless connection on Linux?

  - by Gearoid Murphy

  I recently purchased a netgear 150 usb wireless dongle for use with my 11.10 Xubuntu amd64 system. Using the network-manager interface, I can see local wireless networks and enter the authentication details for my local wireless lan. Unfortunately, the connection does not seem to work, I keep getting notifications that my wireless has disconnected (but none indicating that I've connected). When I examine syslog, it seems to indicate that I've successfully associated with the wireless switch and that dhcp has successfully acquired an ip address but the log shows that the dhcp process keeps sending requests, eventually dropping the connection. 'ifconfig wlan0' never shows the dhcp address logged in syslog. I suspect that the problem lies with the usb dongle, my configuration or the wireless switch but I am not certain how to isolate the problem, can anyone provide some insight on how I should go about homing in on the cause of this problem or verifying the functionality of the individual components, thanks.

  Read the article

• Can't access LAN computers with SSH

  - by endolith

  I got a new Windows 7 machine, and was using VNC,SSH etc to connect to my Ubuntu machine, and it worked fine previously. Now it doesn't work if I use the machine's hostname or local IP, but if I use the DynDNS name, it works. I can also access it from my Android phone using the local hostname over SSH. If I try to connect with SSH to the hostname, it says "Host does not exist". VNC says "Failed to get server address". NX says "no address associated with name", and I don't see it in Windows' "Network" folder. I've rebooted everything. I've turned off Windows firewall. It was working fine a few days ago, but now it's not. How do I figure out what's blocking it?

  Read the article

• Oracle Database 12c Technical Trainin

  - by mseika

  Audience Database Administrators, Solutions Architects, System Engineers, Technical Consultants, Implementation and support personnel, Technical Analysts, and Developers. What We Are Announcing During his opening keynote at Oracle OpenWorld 2012, Larry Ellison previewed Oracle Database 12c - the latest generation of the database market leader and Oracle flagship product. Oracle Database 12c introduces many groundbreaking features making it the database foundation of choice for the cloud. Many years of development effort have been focused on introducing innumerable new technological innovations centered on the cloud computing platform. This training session will focus on the specific needs of our Oracle partner community and developers, and provide insight into the many features and capabilities your customers will be looking to leverage in their own environments. Topics includes: Consolidation and Cloud Strategies Deep dive into the key Database 12c Options Migrating to Oracle Database 12c Webcast Details Speaker: Sean Stacey, Director of Platform Technology Solutions.Please note that you will need to join both the Audio and Web Conferences to attend. Please plan on joining 10 minutes before the scheduled time. Region: Date & Time Audio Conference Web Conference Calendar NAS, LAD, EMEA July 28am PT (US) Duration: 1 hour US/Canada: (866) 900-7470Click for local numberIf your country is not listed, dial +1 (706) 634-7953. Local charges may applyCONFERENCE ID: 98498078 Click here to joinPassword: Oracle123 Add this session to your calendar If you have any questions, please contact: Yvonne OungSenior Manager, Channel [email protected]

  Read the article

• Mysql Servers for Attendance System

  - by foo

  I'm building an attendance system. There are about 20 places where people will check in and check out using Mifare 1K Card. It will use MySQL as the database. The system will display something like "#ID IN: 800AM" when the first time the user checks in and "#ID OUT: 400PM" when the user checks out. For this to work, all the databases need to be synchronized with each other all the times. For an example, if user A went to location #1 to check in but by the time he wants to return home, the server at location #1 went down, he needs to go to location #2 or the nearest server to check out. The server at location #2 should display '#ID OUT: 400PM" and not "#ID IN: 400PM" since he's already checked in. So, what should I use to ensure this idea will work? My main concern is with the network (other department manages it) which is very unpredictable. It just love to go down anytime it wants to. Update LOL, didn't realize my question is not clear, just noticed it when you guys pointed it out, sorry about that. My real question is, how can I configure my MySQL to be synchronized with each other (20 servers)? MySQL cluster ? (tried reading about it, but I'm not sure if it's the right thing to do) My current setup (first phase): Local database for each server OS: Slackware A main server that keeps track which staff is at which server A web based front end for the user to see their history (which connects to the server based on their records) Main Pros No worries about network problems since it is a local database Main Cons A user can only check in and out at the same server. Databases/Servers are not connected with each others. Have to add the user to each server if the users want to check in at different locations. Which means, if he wants to go to location A, he must be checked out from location A first and then check in at location B. The server at location B didn't know that the user has checked in before at A. By the way, I've already centralized my NTP to a local server. About the network, let's just say, I don't have the authority to make changes so that the network will be better. The network won't effect all 20 servers at once, usually, just a few of them for several times a week. If there are anything else you would like me to answer, please just ask.

  Read the article

• Chrome refused to execute this JavaScript file

  - by TestSubject528491

  In the head of my HTML page, I have: <script src="https://raw.github.com/cloudhead/less.js/master/dist/less-1.3.3.js"></script> When I load the page in my browser (Google Chrome v 27.0.1453.116) and enable the developer tools, it says: Refused to execute script from 'https://raw.github.com/cloudhead/less.js/master/dist/less-1.3.3.js' because its MIME type ('text/plain') is not executable, and strict MIME type checking is enabled. Indeed, the script won't run. Why does Chrome think this is a plain text file? It clearly has a .js file extension. Since I'm using HTML5, I omitted the type attribute, so I thought that might be causing the problem. So I added type="text/javascript" to the <script> tag, and got the same result. I even tried type="application/javascript" and still got the same error. Then I tried changing it to type="text/plain" just out of curiosity. The browser did not return an error, but of course the JavaScript did not run either. Finally I thought the periods in the filename might be throwing the browser off. So in my HTML code, I changed all the periods to the URL escape character %2E: <script src="https://raw.github.com/cloudhead/less%2Ejs/master/dist/less-1%2E3%2E3.js"></script> This still did not work. The only thing that truly works (i.e. the browser does not give an error and the JS successfully runs) is if I download the file, upload it to a local directory, and then change the src value to the local file. I'd rather not do this since I'm trying to save space on my own website. How do I get Chrome to recognize that the linked file is actually a JavaScript type?

  Read the article

• Explaining Git to someone new to revision control

  - by MaxMackie

  I've recently decided to jump into the whole world of revision control to work on some open source projects I have. I looked around (subversion, mercurial, git, etc) and found that Git seemed to make more sense conceptually to me. I've set everything up on my computer (opensuse) and made an account on gitorious (let me know if there is a more simple/better hosting provider). I understand Git from a conceptual point of view (work locally, commit to a local repo, others can now checkout from you, right?). But where does gitorious come into play? I commit to them as well as committing locally? Apart from conceptually, I don't quite understand HOW it works when it comes to making a local repository and running git init inside a folder and that HEAD file. Keep in mind I have never used any form of revision control ever before. So even the most basic concepts are foreign to me. As I post this, I'm also reading up and trying to figure it out myself.

  Read the article

• How to make Google recognize language for a multilingual website?

  - by Julien Fouilhé

  Few weeks ago, I implemented translation functionality for the website of my company. The website is now available in french and english and I did look on the internet the best way to do if we want to do not lose any ranking and to have our pages on Google. Here is what I did: I did set a response header: Content-Language:en and Content-Language:fr My URLs are formatted as: http://www.website.com/en/... and http://www.website.com/fr/... My html tag is set with a lang attribute: <html lang="en"> and <html lang="fr"> There is a <link rel="alternate" hreflang="en" href="EnglishPageUrl"> on french pages and a <link rel="alternate" hreflang="en" href="frenchPageUrl"> on english pages. But Google keeps referring to some english pages when I'm doing a search on french engine, knowing that the website was first only available in english. Is that normal? Do I have to wait still, it has been now almost one month, I thought it would be okay...? Thank you.

  Read the article

• How is DNS used by individual processes?

  - by atroon

  When resolving FQDNs or machine names to IP addresses on my local network (mycompany.internal) I can use dig on the command line (linux/mac) or nslookup (windows) to query the configured server and get a response. But trying to enter the FQDN or even just the machine name in a ping command or in a web browser results in 'Unknown Host' or DNS errors. Here's a sample, this one from the Mac: mac:~ atroon$ dig server.mycompany.internal ; <<>> DiG 9.6.0-APPLE-P2 <<>> server.mycompany.internal ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 5219 ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;server.mycompany.internal. IN A ;; ANSWER SECTION: server.mycompany.internal. 1200 IN A 172.16.254.36 ;; Query time: 0 msec ;; SERVER: 172.16.254.8#53(172.16.254.8) ;; WHEN: Wed Dec 16 11:39:15 2009 ;; MSG SIZE rcvd: 55 mac:~ atroon$ ping server.mycompany.internal<br> ping: cannot resolve server.mycompany.internal: Unknown host I cannot for the life of me figure this one out. The DNS server is a SBS 2003 box which handles AD, some file/print, etc for a small company network. This issue happens to me about three times a week, and when I'm connected to the local network directly, the same switch as the server even. I can make any connection I want with IP addresses, I just can't make DNS work. Additionally, at the same time I'm experiencing this, other users are fine, which makes me think it's a problem on my Mac. But what sort of problem? How can dig send a query and get a reply, and ping say 'unknown host'? I'm posting here vs. serverfault because I think this is a local problem not a server problem...but if anyone can point me at the server, I guess we'll head down the street a domain or two.

  Read the article

• Internet Explorer 9 send page by email grayed out

  - by catester

  Internet Explorer 9 in Windows 7 Home Premium 64-bit has the items Send Page by email and Send link by email grayed out. The default email client is Windows Live Mail 2011. I have used the "Set Default" dialogs to do that. Everything else recognizes Windows Live Mail 2011 as the default, including Firefox 4. I have duplicated this problem on two computers here. I have changed the default email program to Mozilla Thunderbird on one of the computers, and IE9 won't let me Send Page by email or Send link by email there, either. Has anyone gotten this to work? Firefox is my default browser, but sometimes I have to use IE9.

  Read the article

• How can I remove duplicate icons for "launched" java programs in the launcher?

  - by Tim

  When launching java programs (like IntelliJ IDEA and Crashplan) in Natty's Unity launcher, duplicate icons are shown (see image). For IntelliJ I created the .desktop file, for Crashplan the .desktop file is supplied with the application. Is there something that can be changed in the .desktop files (or somewhere else) that can prevent this from occurring? I couldn't find a bug report for unity itself but programs like Gnome-Do/Docky have bug reports and had to make internal changes to their applications to prevent this. In this image the 1st icon is the one created from the .desktop file and the second icon is after launching it. Second icon disappears when closing the application. Custom IntelliJ .desktop file #!/usr/bin/env xdg-open [Desktop Entry] Version=1.0 Type=Application Terminal=false Icon[en_US]=/opt/idea/bin/idea128.png Name[en_US]=IntelliJ IDEA Exec=/opt/idea/bin/idea.sh Name=IntelliJ IDEA Icon=/opt/idea/bin/idea128.png StartupNotify=true Crashplan provide .desktop file [Desktop Entry] Version=1.0 Encoding=UTF-8 Name=CrashPlan Categories=; Comment=CrashPlan Desktop UI Comment[en_CA]=CrashPlan Desktop UI Exec=/usr/local/crashplan/bin/CrashPlanDesktop Icon=/usr/local/crashplan/skin/icon_app_64x64.png Hidden=false Terminal=false Type=Application GenericName[en_CA]=

  Read the article

• Changing Windows 'hosts' file in guest OS under Parallels Desktop 6

  - by Jan

  Hi all, I am running Win7 in a Parallels Desktop 6 on Mac. I would like to modify my Windows hosts file. When doing this through notepad it says "You don't have permission to save in this location..." I am logged on as a regular windows user - not as 'local admin'. How can I edit the file? How can I grant my regular user 'local admin' rights? How can change the Windows user to 'admin' ... this option seems to be missing in my windows install... Does anybody recognize the issue? Thank you! J.

  Read the article

• How to connect with MySQL server if it won't connect via the socket?

  - by cwd

  I have an account on a shared server. I have jailshell access and also PhpMyAdmin. I want to run mysql commands via SSH but I'm getting an error: $ mysql -u mySqlUser -p mySqlPw Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' I can connect with PHP and phpMyAdmin, so would it be possible to call mysql from the shell and have it connect via an ip and port instead of the socket? The file /var/lib/mysql/mysql.sock does not exist - maybe that is intentional, and the only thing in /etc/my.cnf is [mysqld] skip-innodb More Info I don't have access to change system settings. I did a search in /var for mysql.sock but found nothing. However, phpMyAdmin might be connecting via a socket somehow: Really it would just be great if I could connect via IP. Also tried these two syntaxes: $ mysql -u mySqlUser -p mySqlPw -h localhost $ mysql -u mySqlUser -p mySqlPw -h localhost -P 3306 Both with the same result: ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2)

  Read the article

• Lead Programmer definition clarification

  - by Junaid

  I am working on PHP and MySQL based web application for more than 5 years now. I started my career from Intern - Jr Developer - Software Developer - Sr. Software Engineer [Team Lead] that's what I am nowadays. I was looking at the link at Wikipedia regarding who is a lead programmer. The link states the following: A lead programmer is a software engineer in charge of one or more software projects. Alternative titles include Development Lead, Technical Lead, Senior Software Engineer, Software Design Engineer Lead (SDE Lead), Software Manager, or Senior Applications Developer. When primarily contributing in a high-level enterprise software design role, the title Software Architect (or similar) is often used. All of these titles can have different meanings depending on the context. My current job responsibilities are more or less like a Development Lead and to some extent near Software Architect because I usually design the core structure of new products and managing 2-3 project simultaneously and in the meantime involved in assisting other teams regarding the structural design of their projects, I am usually on call with clients along with project managers, I code most of the time when my team stuck somewhere / workload / integrating some third party API and etc. Primary reason of this writing is to know if I qualify for a Development Lead Title? in accordance with my above mentioned job descriptions?

  Read the article

• Can I buy a wireless access point that also acts as a DNS nameserver?

  - by Brabster

  Hi, I was wondering if I buy a wireless access point/router that also acts as a DNS nameserver for DHCP clients. I can see the hostnames of my home devices in the DHCP clients table of the router I have, it doesn't seem like a great leap of the imagination to have a local nameserver on there, something like hostname.home that automatically publishes those entries to a local zone. But - I can't find one that does that. Is there a reason why this shouldn't/can't be done? Or is my Google-Fu just weak? Cheers,

  Read the article

• Setup IPv6 over IPv4 tunnel in VPN

  - by bfmeb

  Let me explain my szenario: I have a linux server A. A is reachable in a VPN. So if I am connected to the VPN over Internet I can successfully ping A. Server A is connected to a Router B. Router B has a local ipv6 address and there are resources (each of them with a local ipv6 address) connected to Router B. After I am connected to VPN, I am able to use ssh to have access over A. Now I can use the ping6 command to ping the Router B or one of its connected resources. This works fine. The ping fails if I try to ping router B on my computer. Overview: My Computer -- VPN -- Server A(ipv4) -- Router B(ipv6) -- Ressource A(ipv6) On resource A runs for example a HTTP-Server. My question is: How can I access Resource A (for example with HTTP) on my to VPN connected computer? Is it possible? Should I setup a tunnel device? Sorry for this inexpertly explanation, but I am new to network stuff!

  Read the article

• wireless is disabled by hardware lenovo 3000g430

  - by sudheer

  sir i have problem with my wifi switch sir please tell me solution for my problem (wifi is disabled by hardware). output of sudo lshw -C network is sudo] password for sudheer: *-network DISABLED description: Wireless interface product: BCM4312 802.11b/g LP-PHY vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:06:00.0 logical name: eth2 version: 01 serial: 00:21:00:72:3a:93 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 latency=0 multicast=yes wireless=IEEE 802.11bg resources: irq:19 memory:f4700000-f4703fff *-network description: Ethernet interface product: NetLink BCM5906M Fast Ethernet PCI Express vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:07:00.0 logical name: eth0 version: 02 serial: 00:1e:68:ad:24:0b size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.121 duplex=full firmware=sb v3.04 ip=172.16.52.79 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:47 memory:f4600000-f460ffff output of iwconfig is lo no wireless extensions. eth2 IEEE 802.11 Access Point: Not-Associated Link Quality:5 Signal level:0 Noise level:0 Rx invalid nwid:0 invalid crypt:0 invalid misc:0 eth0 no wireless extensions. sudheer@sudheer:~$ sudo iwlistscanning sudo: iwlistscanning: command not found ***sudheer@sudheer:~$ sudo iwlist scanning*** lo Interface doesn't support scanning. eth2 Failed to read scan data : Invalid argument eth0 Interface doesn't support scanning.

  Read the article

• Is there a specific name for the ".\" (dot-slash) shorthand used to log onto a Windows machine?

  - by HopelessN00b

  I guess the title just about says it all. And yes, .\, not that obsolete \. thing. :) For those who don't know, .\ is a shorthand way of saying "this computer" in Windows at a logon screen, which comes in very handy when you don't know or care about the local computer name but need to authenticate against it anyway, such as through RDP or scripting against a set of shared local users and passwords or even locally, if you're unlucky enough to have to physically go to a machine. Anyway, does this have an actual name, and if so, what is it? I feel kind of stupid saying the dot-slash thing, which is how I've been referring to this.

  Read the article

• All terminal commands (like ls, cd, edit, open) are returning errors on my Mac

  - by park

  From what I can tell from reading other questions/answers is that my .bash_profile file may be corrupt. If I type echo $PATH in terminal the result is: /usr/local/git/bin From what I've read, that's not what the result is supposed to be. But I also can't get any of the commands (like edit or subl, for Sublime Text 2) to open the .bash_profile file to edit it. I was able to open the file in TextEdit using "cmd-shift-.", and here's what's in the file: [[ -s "$HOME/.rvm/scripts/rvm" ]] && source "$HOME/.rvm/scripts/rvm" PATH=$PATH:~/bin export PATH export PATH=/usr/local/git/bin But the file is LOCKED, so I can't edit it there either. I'm very new to programming and in the middle of trying to install everything on my Mac to go through a Ruby on Rails tutorial. I can't even check my version of ruby, since even ruby -v returns -bash: ruby: command not found Any help would be greatly appreciated. Thanks.

  Read the article

• What are the requirements to test a website using jquery.get() ? [migrated]

  - by Frankie

  I am working on a simple website. It has to search quite a few text files in different sub-folders. The rest of the page uses jquery, so I would like to use it for this also. The function I am looking at is .get() for downloading the files. So my main question is, can I test this on my local computer (Ubuntu Linux) or do I have to have it uploaded to a server? Also, if there's a better way to go about this, that would be nice to know. However, I'm more worried about getting it working. Thanks, Frankie PS: Heres the JS/jQuery code for downloading the files to an array. g_lists = new Array(); $(":checkbox").each(function(i){ if ($(this).attr("name") != "0") { var path = "../" + $(this).attr("name") + ".txt"; $("#bot").append("<br />" + path); // debug $.get(path, function(data){ g_lists[i] = data; $("#bot").html(data); }); } else { g_lists[i] = ""; } }); Edit: Just a note about the path variable. I think it's correct, but I'm not 100% sure. I'm new to web development. Here's some examples it produces and the directory tree of the site. Maybe it will help, can't hurt. . +-- include ¦   +-- jquery.js ¦   +-- load.js +-- index.xhtml +-- style.css +-- txt    +-- Scripting_Tools    +-- Editors.txt    +-- Other.txt Examples of path: ../txt/Scripting_Tools/Editors.txt ../txt/Scripting_Tools/Other.txt Well I'm a new user, so I can't "answer" my own question, so I'll just post it here: After asking for help on a IRC chat channel specific to jQuery, I was told I could use this on a local host. To do this I installed Apache web server, and copied my site into it's directory. More information on setting it up can be found here: http://www.howtoforge.com/ubuntu_debian_lamp_server Then to run the site I navigated my browser to "localhost" and everything works.

  Read the article

• A Linux DHCP server that will listen on an non-broadcast (tap) interface?

  - by TomOnTime

  Are there any Linux DHCP servers that will listen to what Cisco calls an "unnumbered" interface, or what others might call a "NBMA" (non-broadcast) interface. I have a Linux system that connects to a number of others using GRE tunnels. The machines on the other end send DHCP requests to this machine, I can see them with tcpdump. However, ISC DHCP 3.0.3 refuses to listen to the interface because it is non-broadcast. The interface I'd like DHCP to listen to is: tap2 Link encap:Ethernet HWaddr removed-for-privacy inet6 addr: removed-for-privacy/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:518 errors:0 dropped:0 overruns:0 frame:0 TX packets:510 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:196242 (191.6 KiB) TX bytes:52425 (51.1 KiB)

  Read the article

< Previous Page | 367 368 369 370 371 372 373 374 375 376 377 378  | Next Page >