Search Results

Search found 11972 results on 479 pages for 'writing'.

Page 371/479 | < Previous Page | 367 368 369 370 371 372 373 374 375 376 377 378  | Next Page >

  • Outgoing UDP sniffer in python?

    - by twneale
    I want to figure out whether my computer is somehow causing a UDP flood that is originating from my network. So that's my underlying problem, and what follows is simply my non-network-person attempt to hypothesize a solution using python. I'm extrapolating from recipe 13.1 ("Passing Messages with Socket Datagrams") from the python cookbook (also here). Would it possible/sensible/not insane to try somehow writing an outgoing UDP proxy in python, so that outgoing packets could be logged before being sent on their merry way? If so, how would one go about it? Based on my quick research, perhaps I could start a server process listening on suspect UDP ports and log anything that gets sent, then forward it on, such as: import socket s =socket.socket(socket.AF_INET, socket.SOCK_DGRAM) s.bind(("", MYPORT)) while True: packet = dict(zip('data', 'addr'), s.recvfrom(1,024)) log.info("Recieved {data} from {addr}.".format(**packet)) But what about doing this for a large number of ports simultaneously? Impractical? Are there drawbacks or other reasons not to bother with this? Is there a better way to solve this problem (please be gentle).

    Read the article

  • Basic syntax for an animation loop?

    - by Moshe
    I know that jQuery, for example, can do animation of sorts. I also know that at the very core of the animation, there must me some sort of loop doing the animation. What is an example of such a loop? A complete answer should ideally answer the following questions: What is a basic syntax for an effective animation recursion that can animate a single property of a particular object at a time? The function should be able to vary its target object and property of the object. What arguments/parameters should it take? What is a good range of reiterating the loop? In milliseconds? (Should this be a parameter/argument to the function?) REMEMBER: The answer is NOT necessarily language specific, but if you are writing in a specific language, please specify which one. Error handling is a plus. {Nothing is more irritating (for our purposes) than an animation that does something strange, like stopping halfway through.} Thanks!

    Read the article

  • How do I get the inserted id (or object) after an insert with the FormView/ObjectDataSource controls

    - by drs9222
    I have a series of classes that loosely fit the following pattern: public class CustomerInfo { public int Id {get; set;} public string Name {get; set;} } public class CustomerTable { public bool Insert(CustomerInfo info) { /*...*/ } public bool Update(CustomerInfo info) { /*...*/ } public CustomerInfo Get(int id) { /*...*/ } /*...*/ } After a successful insert the Insert method will set the Id property of the CustomerInfo object that was passed in. I've used these classes in several places and would prefer to altering them. Now I'm experimenting with writing an ASP.NET page for inserting and updating the records. I'm currently using the ObjectDataSource and FormView controls: <asp:ObjectDataSource TypeName="CustomerTable" DataObjectTypeName="CustomerInfo" InsertMethod="Insert" UpdateMethod="Update" SelectMethod="Get" /> I can successfully Insert and Update records. I would like to switch the FormView's mode from Insert to Edit after a successful insert. My first attempt was to switch the mode in the ItemInserted event. This of course did not work. I was using a QueryStringParameter for the id which of course wan't set when inserting. So, I switched to manually populating the InputParameters during the ObjectDataSource's Selecting event. The problem with this is I need to know the id of the newly inserted record which I can't find a good way to get. I understand that I can access the Insert method's return value, and out parameters in the ItemInserted event of course my method doesn't return the id using any of these methods. I can't find anyway to access the id or the CustomerInfo object that was inserted after the insert completes. The best I've been able to do is to save the CustomerInfo object in the ObjectDataSource's Inserting event. This feels like an odd way to do this. I figure that there must be a better way to do this and I'll kick myself when I see it. Any ideas?

    Read the article

  • Join + IEqualityComparer<T> and HashCode

    - by Jesus Rodriguez
    Im writing my own LINQ reference but Im getting troubles with some of the more complicated operators implementations. There is a Join implementation that takes a IEqualityComparer Im getting just crazy. Im trying to understand it first before I write (obviously) Image this two lists: List<string> initials = new List<string> {"A", "B", "C", "D", "E"}; List<string> words = new List<string> {"Ant", "Crawl", "Pig", "Boat", "Elephant", "Arc"}; Nothing weird here. I want to join both lists by the Initial, something like: Initial=A Word=Ant Initial=A Word=Arc Initial=B Word=Boat ... I need a comparator, I wrote this: public class InitialComparator : IEqualityComparer<string> { public bool Equals(string x, string y) { return x.StartsWith(y); } public int GetHashCode(string obj) { return obj[0].GetHashCode(); } } The Join itself: var blah = initials.Join(words, initial => initial, word => word, (initial, word) => new {Initial = initial, Word = word}, new InitialComparator()); It's the first time Im using HashCodes, after a good session of debugging I see that every word go to the comparator and look at its HashCode, if another word has the same HashCode it calls equals. Since I want to compare just the initial I though that I just need the first letter Hash (Am I wrong?) The thing is that this is not working correctly. Its says that "Ant" and "Arc" are equals, Ok, its comparing every word in the same list or not, But it adds only the last word it finds, in this case Arc, ignoring Ant and Ant is equals to "A" too... If I put "Ant" and "Ant" it add both. In short, What is the way of doing something like that? I know that Im doing something wrong. Thank you.

    Read the article

  • Core principles, rules, and habits for CS students

    - by Asad Butt
    No doubt there is a lot to read on blogs, in books, and on Stack Overflow, but can we identify some guidelines for CS students to use while studying? For me these are: Finish your course books early and read 4-5 times more material relative to your course work. Programming is the one of the fastest evolving professions. Follow the blogs on a daily basis for the latest updates, news, and technologies. Instead of relying on assignments and exams, do at least one extra, non-graded, small to medium-sized project for every programming course. Fight hard for internships or work placements even if they are unpaid, since 3 months of work 1 year at college. Practice everything, every possible and impossible way. Try doing every bit of your assignments project yourself; i.e. fight for every inch. Rely on documentation as the first source for help and samples, Google, and online forums as the last source. Participate often in online communities and forums to learn the best possible approach for every solution to your problem. (After doing your bit.) Make testing one of your habits as it is getting more important everyday in programming. Make writing one of your habits. Write something productive once or twice a week and publish it.

    Read the article

  • Why is there unreachable code here?

    - by Richard
    I am writing a c# app and want to output error messages to either the console or a messagebox (Depending on the app type: enum AppTypeChoice { Console, Windows } ), and also control wether the app keeps running or not ( bool StopOnError ). I came up with this method that will check all the criteria, but I'm getting an "unreachable code detected" warning. I can't see why! Here is the whole method (Brace yourselves for some hobbyist code!) public void OutputError(string message) { string standardMessage = "Something went WRONG!. [ But I'm not telling you what! ]"; string defaultMsgBoxTitle = "Aaaaarrrggggggggggg!!!!!"; string dosBoxOutput = "\n\n*** " + defaultMsgBoxTitle + " *** \n\n Message was: '" + message + "'\n\n"; AppTypeChoice appType = DataDefs.AppType; DebugLevelChoice level = DataDefs.DebugLevel; // Decide how much info we should give out here... if (level != DebugLevelChoice.None) { // Give some info.... if (appType == AppTypeChoice.Windows) MessageBox.Show(message, defaultMsgBoxTitle, MessageBoxButtons.OK, MessageBoxIcon.Error); else Console.WriteLine(dosBoxOutput); } else { // Be very secretive... if (appType == AppTypeChoice.Windows) MessageBox.Show(standardMessage, defaultMsgBoxTitle, MessageBoxButtons.OK, MessageBoxIcon.Error); else Console.WriteLine(standardMessage); } // Decide if app falls over or not.. if (DataDefs.StopOnError == true) Environment.Exit(0); // UNREACHABLE CODE HERE } Also, while I have your attention, to get the app type, I'm just using a constant at the top of the file (ie. AppTypeChoice.Console in a Console app etc) - is there a better way of doing this (i mean finding out in code if it is a DOS or Windows app)? Also, I noticed that I can use a messagebox with a fully-qualified path in a Console app...How bad is is to do that ( I mean, will I get tarred and feathered when other developers see it?!) Thanks for your help

    Read the article

  • Generating JavaScript in C# and subsequent testing

    - by Codebrain
    We are currently developing an ASP.NET MVC application which makes heavy use of attribute-based metadata to drive the generation of JavaScript. Below is a sample of the type of methods we are writing: function string GetJavascript<T>(string javascriptPresentationFunctionName, string inputId, T model) { return @"function updateFormInputs(value){ $('#" + inputId + @"_SelectedItemState').val(value); $('#" + inputId + @"_Presentation').val(value); } function clearInputs(){ " + helper.ClearHiddenInputs<T>(model) + @" updateFormInputs(''); } function handleJson(json){ clearInputs(); " + helper.UpdateHiddenInputsWithJson<T>("json", model) + @" updateFormInputs(" + javascriptPresentationFunctionName + @"()); " + model.GetCallBackFunctionForJavascript("json") + @" }"; } This method generates some boilerplace and hands off to various other methods which return strings. The whole lot is then returned as a string and written to the output. The question(s) I have are: 1) Is there a nicer way to do this other than using large string blocks? We've considered using a StringBuilder or the Response Stream but it seems quite 'noisy'. Using string.format starts to become difficult to comprehend. 2) How would you go about unit testing this code? It seems a little amateur just doing a string comparison looking for particular output in the string. 3) What about actually testing the eventual JavaScript output? Thanks for your input!

    Read the article

  • notify listener inside or outside inner synchronization

    - by Jary Zeels
    Hello all, I am struggling with a decision. I am writing a thread-safe library/API. Listeners can be registered, so the client is notified when something interesting happens. Which of the two implementations is most common? class MyModule { protected Listener listener; protected void somethingHappens() { synchronized(this) { ... do useful stuff ... listener.notify(); } } } or class MyModule { protected Listener listener; protected void somethingHappens() { Listener l = null; synchronized(this) { ... do useful stuff ... l = listener; } l.notify(); } } In the first implementation, the listener is notified inside the synchronization. In the second implementation, this is done outside the synchronization. I feel that the second one is advised, as it makes less room for potential deadlocks. But I am having trouble to convince myself. A downside of the second imlementation is that the client might receive 'incorrect' notifications, which happens if it accessed the module prior to the l.notify() statement. thanks a lot

    Read the article

  • SSL certificate pre-fetch .NET

    - by Wil P
    I am writing a utility that would allow me to monitor the health of our websites. This consists of a series of validation tasks that I can run against a web application. One of the tests is to anticipate the expiration of a particular SSL certificate. I am looking for a way to pre-fetch the SSL certificate installed on a web site using .NET or a WINAPI so that I can validate the expiration date of the certificate associated with a particular website. One way I could do this is to cache the certificates when they are validated in the ServicePointManager.ServerCertificateValidationCallback handler and then match them up with configured web sites, but this seems a bit hackish. Another would be to configure the application with the certificate for the website, but I'd rather avoid this if I can in order to minimize configuration. What would be the easiest way for me to download an SSL certificate associated with a website using .NET so that I can inspect the information the certificate contains to validate it? EDIT: To extend on the answer below there is no need to manually create the ServicePoint prior to creating the request. It is generated on the request object as part of executing the request. private static string GetSSLExpiration(string url) { HttpWebRequest request = WebRequest.Create(url) as HttpWebRequest; using (WebResponse response = request.GetResponse()) { } if (request.ServicePoint.Certificate != null) { return request.ServicePoint.Certificate.GetExpirationDateString(); } else { return string.Empty; } }

    Read the article

  • Building a custom (dynamic) dataset and grid

    - by marko.ivanovski.nz
    Hi, I'm in the process of building a dynamic table in which you can add/remove rows & columns so it varies in size depending on what the user wants. Its purpose is to store properties for a product, but there can be from 1 to 10 different properties(columns) per product, and multiple instances(rows) of the product as well. Here's a screenshot of what I mean http://i40.tinypic.com/nbqkxc.jpg As you can see I need the structure to be completely up to the client which is where I'm getting stuck. I've started writing a custom DataSet that has "add column" & "add row" buttons, and have built a custom Table with Textboxes in each cell which builds from that dataset. I have no idea how to store the data on submit though, and to make it even more complex I need to store this in the database as a string which I think I can do by converting it to XML. Any help is appreciated, I think I just need a pointer in the right direction and am happy to do research from there. Thanks in advance. Marko

    Read the article

  • How to exit an if clause

    - by Roman Stolper
    What sorts of methods exist for prematurely exiting an if clause? There are times when I'm writing code and want to put a break statement inside of an if clause, only to remember that those can only be used for loops. Lets take the following code as an example: if some_condition: ... if condition_a: # do something # and then exit the outer if block ... if condition_b: # do something # and then exit the outer if block # more code here I can think of one way to do this: assuming the exit cases happen within nested if statements, wrap the remaining code in a big else block. Example: if some_condition: ... if condition_a: # do something # and then exit the outer if block else: ... if condition_b: # do something # and then exit the outer if block else: # more code here The problem with this is that more exit locations mean more nesting/indented code. Alternatively, I could write my code to have the if clauses be as small as possible and not require any exits. Does anyone know of a good/better way to exit an if clause? If there are any associated else-if and else clauses, I figure that exiting would skip over them.

    Read the article

  • Compiled Haskell libraries with FFI imports are invalid when imported into GHCI

    - by John Millikin
    I am using GHC 6.12.1, in Ubuntu 10.04 When I try to use the FFI syntax for static storage, only modules running in interpreted mode (ie GHCI) work properly. Compiled modules have invalid pointers, and do not work. I'd like to know whether anybody can reproduce the problem, whether this an error in my code or GHC, and (if the latter) whether it's a known issue. I'm using sys_siglist because it's present in a standard library on my system, but I don't believe the actual storage used matters (I discovered this while writing a binding to libidn). If it helps, sys_siglist is defined in <signal.h> as: extern __const char *__const sys_siglist[_NSIG]; I thought this type might be the problem, so I also tried wrapping it in a plain C procedure: #include<stdio.h> const char **test_ffi_import() { printf("C think sys_siglist = %X\n", sys_siglist); return sys_siglist; } However, importing that doesn't change the result, and the printf() call prints the same pointer value as show siglist_a. My suspicion is that it's something to do with static and dynamic library loading. Update: somebody in #haskell suggested this might be 64-bit specific; if anybody tries to reproduce it, can you mention your architecture and whether it worked in a comment? Code as follows: -- A.hs {-# LANGUAGE ForeignFunctionInterface #-} module A where import Foreign import Foreign.C foreign import ccall "&sys_siglist" siglist_a :: Ptr CString -- -- B.hs {-# LANGUAGE ForeignFunctionInterface #-} module B where import Foreign import Foreign.C foreign import ccall "&sys_siglist" siglist_b :: Ptr CString -- -- Main.hs {-# LANGUAGE ForeignFunctionInterface #-} module Main where import Foreign import Foreign.C import A import B foreign import ccall "&sys_siglist" siglist_main :: Ptr CString main = do putStrLn $ "siglist_a = " ++ show siglist_a putStrLn $ "siglist_b = " ++ show siglist_b putStrLn $ "siglist_main = " ++ show siglist_main peekSiglist "a " siglist_a peekSiglist "b " siglist_b peekSiglist "main" siglist_main peekSiglist name siglist = do ptr <- peekElemOff siglist 2 str <- maybePeek peekCString ptr putStrLn $ "siglist_" ++ name ++ "[2] = " ++ show str I would expect something like this output, where all pointer values identical and valid: $ runhaskell Main.hs siglist_a = 0x00007f53a948fe00 siglist_b = 0x00007f53a948fe00 siglist_main = 0x00007f53a948fe00 siglist_a [2] = Just "Interrupt" siglist_b [2] = Just "Interrupt" siglist_main[2] = Just "Interrupt" However, if I compile A.hs (with ghc -c A.hs), then the output changes to: $ runhaskell Main.hs siglist_a = 0x0000000040378918 siglist_b = 0x00007fe7c029ce00 siglist_main = 0x00007fe7c029ce00 siglist_a [2] = Nothing siglist_b [2] = Just "Interrupt" siglist_main[2] = Just "Interrupt"

    Read the article

  • How to distinguish between two different UDP clients on the same IP address?

    - by Ricket
    I'm writing a UDP server, which is a first for me; I've only done a bit of TCP communications. And I'm having trouble figuring out exactly how to distinguish which user is which, since UDP deals only with packets rather than connections and I therefore cannot tell exactly who I'm communicating with. Here is pseudocode of my current server loop: DatagramPacket p; socket.receive(p); // now p contains the user's IP and port, and the data int key = getKey(p); if(key == 0) { // connection request key = makeKey(p); clients.add(key, p.ip); send(p.ip, p.port, key); // give the user his key } else { // user has a key // verify key belongs to that IP address // lookup the user's session data based on the key // react to the packet in the context of the session } When designing this, I kept in mind these points: Multiple users may exist on the same IP address, due to the presence of routers, therefore users must have a separate identification key. Packets can be spoofed, so the key should be checked against its original IP address and ignored if a different IP tries to use the key. The outbound port on the client side might change among packets. Is that third assumption correct, or can I simply assume that one user = one IP+port combination? Is this commonly done, or should I continue to create a special key like I am currently doing? I'm not completely clear on how TCP negotiates a connection so if you think I should model it off of TCP then please link me to a good tutorial or something on TCP's SYN/SYNACK/ACK mess. Also note, I do have a provision to resend a key, if an IP sends a 0 and that IP already has a pending key; I omitted it to keep the snippet simple. I understand that UDP is not guaranteed to arrive, and I plan to add reliability to the main packet handling code later as well.

    Read the article

  • documenting class attributes

    - by intuited
    I'm writing a lightweight class whose attributes are intended to be publicly accessible, and only sometimes overridden in specific instantiations. There's no provision in the Python language for creating docstrings for class attributes, or any sort of attributes, for that matter. What is the accepted way, should there be one, to document these attributes? Currently I'm doing this sort of thing: class Albatross(object): """A bird with a flight speed exceeding that of an unladen swallow. Attributes: """ flight_speed = 691 __doc__ += """ flight_speed (691) The maximum speed that such a bird can attain. """ nesting_grounds = "Raymond Luxury-Yacht" __doc__ += """ nesting_grounds ("Raymond Luxury-Yacht") The locale where these birds congregate to reproduce. """ def __init__(**keyargs): """Initialize the Albatross from the keyword arguments.""" self.__dict__.update(keyargs) Although this style doesn't seem to be expressly forbidden in the docstring style guidelines, it's also not mentioned as an option. The advantage here is that it provides a way to document attributes alongside their definitions, while still creating a presentable class docstring, and avoiding having to write comments that reiterate the information from the docstring. I'm still kind of annoyed that I have to actually write the attributes twice; I'm considering using the string representations of the values in the docstring to at least avoid duplication of the default values. Is this a heinous breach of the ad hoc community conventions? Is it okay? Is there a better way? For example, it's possible to create a dictionary containing values and docstrings for the attributes and then add the contents to the class __dict__ and docstring towards the end of the class declaration; this would alleviate the need to type the attribute names and values twice. edit: this last idea is, I think, not actually possible, at least not without dynamically building the class from data, which seems like a really bad idea unless there's some other reason to do that. I'm pretty new to python and still working out the details of coding style, so unrelated critiques are also welcome.

    Read the article

  • Putting a C++ Vector as a Member in a Class that Uses a Memory Pool

    - by Deep-B
    Hey, I've been writing a multi-threaded DLL for database access using ADO/ODBC for use with a legacy application. I need to keep multiple database connections for each thread, so I've put the ADO objects for each connection in an object and thinking of keeping an array of them inside a custom threadInfo object. Obviously a vector would serve better here - I need to delete/rearrange objects on the go and a vector would simplify that. Problem is, I'm allocating a heap for each thread to avoid heap contention and stuff and allocating all my memory from there. So my question is: how do I make the vector allocate from the thread-specific heap? (Or would it know internally to allocate memory from the same heap as its wrapper class - sounds unlikely, but I'm not a C++ guy) I've googled a bit and it looks like I might need to write an allocator or something - which looks like so much of work I don't want. Is there any other way? I've heard vector uses placement-new for all its stuff inside, so can overloading operator new be worked into it? My scant knowledge of the insides of C++ doesn't help, seeing as I'm mainly a C programmer (even that - relatively). It's very possible I'm missing something elementary somewhere. If nothing easier comes up - I might just go and do the array thing, but hopefully it won't come to that. I'm using MS-VC++ 6.0 (hey, it's rude to laugh! :-P ). Any/all help will be much appreciated.

    Read the article

  • Why does setting this member in C fail?

    - by Lee Crabtree
    I'm writing a Python wrapper for a C++ library, and I'm getting a really weird when trying to set a struct's field in C. If I have a struct like this: struct Thing { PyOBJECT_HEAD unsigned int val; }; And have two functions like this: static PyObject* Thing_GetBit(Thing* self, PyObject* args) { unsigned int mask; if(!PyArg_ParseTuple(args, "I", &mask) Py_RETURN_FALSE; if((self->val & mask) != 0) Py_RETURN_TRUE; Py_RETURN_FALSE; } static PyObject* Thing_SetBit(Thing* self, PyObject* args) { unsigned int mask; bool on; if(!PyArg_ParseTuple(args, "Ii", &mask, &on)) Py_RETURN_FALSE; if(on) thing->val |= mask; else thing->val &= ~mask; Py_RETURN_TRUE; } Python code that calls the first method works just fine, giving back the value of the struct member. Calls to the SetBit method give an error about an object at address foo accessing memory at address bar, which couldn't be "written". I've poked around the code, and it's like I can look at the value all I want, both from C and Python, but the instant I try to set it, it blows up in my face. Am I missing something fundamental here?

    Read the article

  • Optimizing processing and management of large Java data arrays

    - by mikera
    I'm writing some pretty CPU-intensive, concurrent numerical code that will process large amounts of data stored in Java arrays (e.g. lots of double[100000]s). Some of the algorithms might run millions of times over several days so getting maximum steady-state performance is a high priority. In essence, each algorithm is a Java object that has an method API something like: public double[] runMyAlgorithm(double[] inputData); or alternatively a reference could be passed to the array to store the output data: public runMyAlgorithm(double[] inputData, double[] outputData); Given this requirement, I'm trying to determine the optimal strategy for allocating / managing array space. Frequently the algorithms will need large amounts of temporary storage space. They will also take large arrays as input and create large arrays as output. Among the options I am considering are: Always allocate new arrays as local variables whenever they are needed (e.g. new double[100000]). Probably the simplest approach, but will produce a lot of garbage. Pre-allocate temporary arrays and store them as final fields in the algorithm object - big downside would be that this would mean that only one thread could run the algorithm at any one time. Keep pre-allocated temporary arrays in ThreadLocal storage, so that a thread can use a fixed amount of temporary array space whenever it needs it. ThreadLocal would be required since multiple threads will be running the same algorithm simultaneously. Pass around lots of arrays as parameters (including the temporary arrays for the algorithm to use). Not good since it will make the algorithm API extremely ugly if the caller has to be responsible for providing temporary array space.... Allocate extremely large arrays (e.g. double[10000000]) but also provide the algorithm with offsets into the array so that different threads will use a different area of the array independently. Will obviously require some code to manage the offsets and allocation of the array ranges. Any thoughts on which approach would be best (and why)?

    Read the article

  • Java Bucket Sort on Strings

    - by Michael
    I can't figure out what would be the best way to use Bucket Sort to sort a list of strings that will always be the same length. An algorithm would look like this: For the last character position down to the first: For each word in the list: Place the word into the appropriate bucket by current character For each of the 26 buckets(arraylists) Copy every word back to the list I'm writing in java and I'm using an arraylist for the main list that stores the unsorted strings. The strings will be five characters long each. This is what I started. It just abrubdly stops within the second for loop because I don't know what to do next or if I did the first part right. ArrayList<String> count = new ArrayList<String>(26); for (int i = wordlen; i > 0; i--) { for (int j = 0; i < myList.size(); i++) myList.get(j).charAt(i) } Thanks in advanced.

    Read the article

  • Flash "visible" issue

    - by justkevin
    I'm writing a tool in Flex that lets me design composite sprites using layered bitmaps and then "bake" them into a low overhead single bitmapData. I've discovered a strange behavior I can't explain: toggling the "visible" property of my layers works twice for each layer (i.e., I can turn it off, then on again) and then never again for that layer-- the layer stays visible from that point on. If I override "set visible" on the layer as such: override public function set visible(value:Boolean):void { if(value == false) this.alpha = 0; else {this.alpha = 1;} } The problem goes away and I can toggle "visibility" as much as I want. Any ideas what might be causing this? Edit: Here is the code that makes the call: private function onVisibleChange():void { _layer.visible = layerVisible.selected; changed(); } The changed() method "bakes" the bitmap: public function getBaked():BitmapData { var w:int = _composite.width + (_atmosphereOuterBlur * 2); var h:int = _composite.height + (_atmosphereOuterBlur * 2); var bmpData:BitmapData = new BitmapData(w,h,true,0x00000000); var matrix:Matrix = new Matrix(); var bounds:Rectangle = this.getBounds(this); matrix.translate(w/2,h/2); bmpData.draw(this,matrix,null,null,new Rectangle(0,0,w,h),true); return bmpData; } Incidentally, while the layer is still visible, using the Flex debugger I can verify that the layer's visible value is "false".

    Read the article

  • Preferred way of application initialization

    - by lisak
    Do you guys have your own little framework for project startups ? I mean, every time one needs to do the same things at the beginning: Context initialization - ideally after arguments are processed. Sometimes without interactive user input, sometimes with input reader. Sometimes we need to load properties, sometimes not. Then we need to get a class out of context and run its method. Programming....programming until writing shell script to place everything on classpath. It's true that it differs according to the actual needs. But it seems to me, that I'm doing always almost the same, again and again from the scratch. Sometimes I realize that I'm postponing my work just because I don't want to do these annoying startups. It would be great if there was some kind of universal Main class doing reflection to specified bean, context initialization, argument parsing, interactive user input reading and have the programmer do the important things...All setup might be done via spring configuration. I think I'll have to do it by myself. I'd appreciate your ideas

    Read the article

  • Java and .net interoperability

    - by dineshrekula
    I have a c# program through which i am opening cmd window as a a process. in this command window i am running a batch file. i am redirecting the output of that batch file commands to a Text File. When i run my application everything seems to be ok. But few times, Application is giving some error like "Can't access the file. it's being used by another application" at the same time cmd window is not getting closed. If we close the cmd process through the Task Manager, then it's writing the content to the file and getting closed. Even though i closed the cmd process, still file handle is not getting released. so that i am not able to run the application next time onwards.Always it's saying Can't access the file. Only after restarting the system, it's working. Here is my code: Process objProcess = new Process(); ProcessStartInfo objProInfo = new ProcessStartInfo(); objProInfo.WindowStyle = ProcessWindowStyle.Maximized; objProInfo.UseShellExecute = true; objProInfo.FileName = "Batch file path" objProInfo.Arguments = "Some Arguments"; if (Directory.Exists(strOutputPath) == false) { Directory.CreateDirectory(strOutputPath); } objProInfo.CreateNoWindow = false; objProcess.StartInfo = objProInfo; objProcess.Start(); objProcess.WaitForExit(); test.bat: java classname argument > output.txt Here is my question: I am not able to trace where the problem is.. How we can see the process which holding handle on ant file. Is there any suggestions for Java and .net interoperability

    Read the article

  • need primitive public key signature with out of band key distribution

    - by Mike D
    I pretty much a complete neophyte at this signature business so I don't know if what I'm asking is nonsense or not. Anyway, here goes... I want to send an out of band message (don't worry about how it gets there) to a program I've written on a distant machine. I want the program to have some confidence the message is legit by attaching a digital signature to the message. The message will be small less than 200 characters. It seems a public key based signature is what I want to use. I could embed the public key in the program. I understand that the program would be vulnerable to attack by anyone who modifies it BUT I'm not too worried about that. The consequences are not dire. I've looked through the MSDN and around the web but the prospect of diving in is daunting. I'm writing in straight c++, no NET framework or other fancy stuff. I've had no experience including NET framework stuff and little luck during previous attempts. Can anyone point me at some very basic resources to get me started? I need to know 1)how to generate the public and private keys 2)how to sign the message 3)how to verify the signature Any help much appreciated. TIA, Mike

    Read the article

  • Deployment Setup (.Net) - Search target machine -> Registry search (64 bit)

    - by Joonas Kirsebom
    I have a windows installer project which installs some software (winform, service, mce addin). During the installation I need to search the machine for a registry key. This is done with with the "Launch Condition" - "Add Registry Search" (Deployment Project). I have filled out all the properties right, and checked against the regestry that the value actually can be found. The problem is that the "Registry Search" searches in the x86 part of the registry (HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\...) although my system is a x64 and the deployment setup is also set to x64. Does anyone know how to force the "Registry Search" to search the x64 registry? Or know about a workaround? The weird thing about this, is that Registry setting in the deployment setup is writing to the right registry (x64). My idea is that the "Registry Search" program is only developed to the x86 architecture, and therefore can't read the right registry. I found this article from microsoft, so it seams that they know about this problem. https://connect.microsoft.com/VisualStudio/feedback/ViewFeedback.aspx?FeedbackID=110105&wa=wsignin1.0#details My system is: Windows 7 64bit Visual Studio 2008

    Read the article

  • ASP.net file operations delay

    - by mtranda
    Ok, so here's the problem: I'm reading the stream from a FileUpload control, reading in chunks of n bytes and writing the array in a loop until I reach the stream's end. Now the reason I do this is because I need to check several things while the upload is still going on (rather than doing a Save(); which does the whole thing in one go). Here's the problem: when doing this from the local machine, I can see the file just fine as it's uploading and its size increases (had to add a Sleep(); clause in the loop to actually get to see the file being written). However, when I upload the file from a remote machine, I don't get to see it until the the file has completed uploading. Also, I've added another call to write the progress to a text file as the progress is going on, and I get the same thing. Local: the file updates as the upload goes on, remote: the token file only appears after the upload's done (which is somewhat useless since I need it while the upload's still happening). Is there some sort of security setting in (or ASP.net) that maybe saves files in a temporary location for remote machines as opposed to the local machine and then moves them to the specified destination? I would liken this with ASP.net displaying error messages when browsing from the local machine (even on the public hostname) as opposed to the generic compilation error page/generic exception page that is shown when browsing from a remote machine (and customErrors are not off) Any clues on this? Thanks in advance.

    Read the article

  • What is the best way to auto-generate INSERT statements for a SQL Server table?

    - by JosephStyons
    We are writing a new application, and while testing, we will need a bunch of dummy data. I've added that data by using MS Access to dump excel files into the relevant tables. Every so often, we want to "refresh" the relevant tables, which means dropping them all, re-creating them, and running a saved MS Access append query. The first part (dropping & re-creating) is an easy sql script, but the last part makes me cringe. I want a single setup script that has a bunch of INSERTs to regenerate the dummy data. I have the data in the tables now. What is the best way to automatically generate a big list of INSERT statements from that dataset? I'm thinking of something like in TOAD (for Oracle) where you can right-click on a grid and click Save As-Insert Statements, and it will just dump a big sql script wherever you want. The only way I can think of doing it is to save the table to an excel sheet and then write an excel formula to create an INSERT for every row, which is surely not the best way. I'm using the 2008 Management Studio to connect to a SQL Server 2005 database.

    Read the article

< Previous Page | 367 368 369 370 371 372 373 374 375 376 377 378  | Next Page >