Search Results

Search found 12775 results on 511 pages for 'remote validation'.

Page 373/511 | < Previous Page | 369 370 371 372 373 374 375 376 377 378 379 380  | Next Page >

• Windows 7: How to boot up in normal mode after improper shut down?

  - by Level1Coder

  I work in two different locations and whenever there is a power outage at one of the locations, Windows 7 detects that the system was improperly shutdown. Once the power is up, the PC powers on and Windows 7 enters REPAIR/SAFE mode where only someone physically in front of the PC can control it. (Networking is all disabled in this mode) Now before it enters REPAIR/SAFE mode, there is an option for a NORMAL boot. But the catch is that REPAIR/SAFE mode is selected by default with a 30 second timer. Once it automatically enters REPAIR/SAFE mode and if nobody is at the other location, I have no way to remote control it anymore. And then I have to drive over to the other location and reboot it and select boot into NORMAL mode. Where can I change this setting so that Windows 7 always boots into NORMAL mode no matter how many times it is improperly shut down?

  Read the article

• SFTP not working, but SSH is

  - by Dan

  I've had a server running CentOS for a few months now. A few days ago, I stopped being able to connect to it over SFTP. I've tried from multiple computers, OSes, clients, and internet connections. I can SSH in just fine, though. For example, Nautilus gives me this: Error: DBus error org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. Please select another viewer and try again. I was under the impression that SFTP was just pure SSH, and if one worked, the other would, and vice-versa. Clearly that's not the case, though. What could I have done wrong?

  Read the article

• Laptop connectd to 2 VPNs (1st for Internet over WiFi, 2nd to access shared folders on another network) is failing to route traffic over 2nd VPN

  - by Triynko

  I set up a VPN on Windows Server 2008 through its routing and remote access services. I connected to the VPN, and configured the client to allow for split tunneling (Internet traffic goes to my default gateway, and traffic directed to the VPN server goes through the VPN gateway). I had to adjust the routing table, adding an entry to ensure traffic to my VPN server goes through the tunnel by running the command "route add [VPN.IP] mask 255.255.255.255 [VPN.GATEWAY.IP] IF [VPN_INTERFACE_#]". Adding the correct route makes everything work flawlessly on all my machines, except for one. The problematic machine is a laptop that's not directly connected to a network. It connects to WiFi, and then connects to a VPN to obtain internet access. Finally, it connects to the target VPN server for file sharing. The "route add" trick doesn't work for that laptop, I'm assuming because it's connected to two VPNs, and I'm getting the routing wrong. Can anyone familiar with routing explain what routes I may need to add?

  Read the article

• Remotely initiate windows updates

  - by TetraFlash

  I have a network with countless workstations on it and the windows updates are done through WSUS in push cycles to allow us to use a generic image and configuration and avoid network congestion. I have a number of workstations in storage that are connected once a month for a few days to recieve updates, however not all of them fall within their push cycle. I want to avoid going to each machine and clicking "check updates" as that would require me to connect a monitor, mouse and keyboard. Is there a way (preferably through powershell but im open minded) to initiate a check and install of updates on a remote system? Lets say for 1 system at a time right now, I can add a file reader and a look later. NOTE: the configuration of the WSUS server is above my pay grade, im simply being asked to ensure these machines are updated. Thanks for any help or hints

  Read the article

• Allow Internet Access with Default Gateway on Windows 7 VPN Server

  - by Hakoda

  I have a Windows 7 box at home (which I'll refer to as Home-VPN) that runs a simple PPTP VPN server. I have a range of 2 IP address (192.168.1.10-192.168.1.11) to give out, although the server is only able to give out one concurrent connection. Ports 1723 & 47 are correctly forwarded to the server. IPv6 is disabled on both Home-VPN and the client. I setup Home-VPN just like this Youtube video: http://www.youtube.com/watch?v=1s5JxMG06L4 I can connect to it just fine but I can't access the Internet when connected to Home-VPN, all outside web servers (eg. google.com, mozilla.org, apple.com) are unreachable. I know I can uncheck "Use Default Gateway on Remote Servers" on the client side under IPv4 settings but that will route all my traffic through my current connection, rather than through the VPN, defeating the purpose of said VPN. Any ideas on how I can fix this?

  Read the article

• SSL Certificate only works when session active in Server 2008

  - by CodeMonkey1

  I have a web app that uses an installed certificate to send a web request to a 3rd party web service. This has worked for a long time on Windows Server 2003, but just recently we found a problem with it on 2008 installations. When logged into the server as the same user the App Pool uses, either locally or via remote desktop, the web app and it's secure 3rd party request works fine. However, when there are no user sessions open, the 3rd party request fails, as if the certificate were not attached to the web request. Any ideas?

  Read the article

• Can I use static routing to allow me to use my public IP from my LAN?

  - by jnm2

  I would like to be able to use the same hostname to connect to my computer from my phone whether I'm at home or away. Currently I have to maintain duplicate entries for remote desktop, for instance. My router doesn't seem to have a NAT loopback option. I have two routers in fact, a cable modem which goes straight to my main router which does wireless. I can add to the static routing tables on each. Can I use this to loopback the public IP or do I need different routers?

  Read the article

• Disable address bar in Internet Explorer 9

  - by token

  I'm trying to disable the address bar in IE9. I've done a significant amount of searching on this and just can't seem to find a way to make it happen. A lot of web resources discuss how to do it in IE8, but not IE9. The reason you might ask? I have an application being hosted in a remote desktop farm that links to web pages outside of the application into Internet Explorer. I need to ensure users are limited to just going to the pages the program pushes them to. I realize I could use a proxy server to limit where they can go, but I'm trying to find a really simple way to just disable the address bar instead. I can't use Kiosk mode because it puts the browser into full screen mode. This won't work for my situation as I need to give users what appears to be a regular browsing experience without an address bar.

  Read the article

• how to actually install PHP etc on a windows 2003 server

  - by user1624421

  We're just purchasing a dedicated windows 2003 server (in fact I think it's a VPS) How do we actually go about installing software on to it? Simply searching for "installing PHP5 on windows server" just produces material about installing it as if one had access to the computer with a keyboard and mouse. Am I being thick? I've had experience managing a linux server before but that had everything pre-configured and we accessed it via Web Hosting Manager. I don't get the actual concept of connecting to a remote PC and...downloading files? If there's any good books available please point me in the right direction.

  Read the article

• Is there any software that can capture the screen and turn it into a fake webcam input?

  - by rjmunro

  Is there any software that can capture the screen and turn it into a webcam-type input so that you can easily record and/or broadcast your screen with regular video software? Edit: Just to be clear, I'd like to be able to use it live as an input to video conferencing software as well as for making recordings with video editing software. Bonus points if it allows me to capture a screen remote from the computer that is sending the video (for example by connecting to another computer with VNC). So it should show up as an input alongside any webcams I have installed, but instead of being a camera, it should be whatever is on the screen.

  Read the article

• Manipulating Exchange 2003 shared contacts folder remotely

  - by andybak

  I've got a CRM web app running on a remote server that needs to synchronise it's contacts with the in-house Exchange 2003 shared contacts. Exchange 2003 doesn't appear to support web services. What would the typical approach to this problem be? My initial instinct would be to open port 80 on the Exchange server, run a simple webserver, POST to it and then control Exchange via OLE automation scripting (if that's what people are still calling it!) but there might be a better solution I'm not aware of. Any suggestions?

  Read the article

• Access server by hostname without domain

  - by projectshave

  I want to access services on other machines on my home network with just their hostname. In every browser, "http://machine" fails, but adding a period in "http://machine./" works. Is there a way to avoid adding that extra period? My setup is a router with DD-WRT w/ DNSmasq turned on, Win7 machines and several Ubuntu VMs. nslookup works fine with just hostname. Remote desktop works, but TightVNC needs the extra period. ssh needs the period. As I said, all my browsers need the extra period. I'd prefer a solution that doesn't require manually maintaining the hosts file. Thanks.

  Read the article

• Windows XP: How to boot up in normal mode after improper shut down?

  - by Nick

  I work in two different locations and whenever there is a power outage at one of the locations, Windows XP detects that the system was improperly shutdown. Once the power is up, the PC powers on and Windows XP enters REPAIR/SAFE mode where only someone physically in front of the PC can control it. (Networking is all disabled in this mode) Now before it enters REPAIR/SAFE mode, there is an option for a NORMAL boot. But the catch is that REPAIR/SAFE mode is selected by default with a 30 second timer. Once it automatically enters REPAIR/SAFE mode and if nobody is at the other location, I have no way to remote control it anymore. And then I have to drive over to the other location and reboot it and select boot into NORMAL mode. Where can I change this setting so that Windows XP always boots into NORMAL mode no matter how many times it is improperly shut down?

  Read the article

• How to control routes added by RasDial

  - by Robert Dodier

  I am using the RasDial function on a Windows box (Windows Server 2008) to dial a device from which the server then reads data. It seems that some new routes are added to the network routing table when the dial-up connection is made. That interferes with other network interfaces on the server. In particular, RasDial adds a default route which routes traffic to the device, which makes the server unreachable until the connection is dropped. Is there a way to control which routes are added by RasDial? I have been studying Microsoft's document for RasDial and associated items (RASDIALPARAMS, RASDIALEXTENSIONS) without finding anything about routing. There is an option for "Use default gateway on remote network" when configuring a VPN, but I don't see how to apply that in this case. Thanks for any light you can shed on this problem.

  Read the article

• syslog facilities

  - by user65971

  Hi, I have an application (in java) running in a windows PC and I want to send logging messages to a syslog server running in a linux box somewhere in the network. The problem I have is, that it is not clear to me what should I use as facility in this case. I.e. can I (/should I) send the logging info as one of LOCAL0-LOCAL7? Or are they not supposed to be used by remote applications? It is not clear to me if they are usable or not. Should I use USER instead? Could anyone help me on this please? Thank you

  Read the article

• Hidden Periodic Screenshots on a corporate workstation?

  - by ssxuser80

  Can anyone recommend something that allows us to take hidden periodic screenshots of a workstation? We have a user who we believe is abusing his computer privileges. We have our suspicions that he may be playing games, etc. We need to monitor his screen without him being aware of it. Currently, the IT Department here is using Dameware Mini Remote Control to view his login sessions. But there isn't an option to set up automatic periodic screenshots. I'm hoping to find a tool that has this option and can be centrally managed as well. Thank you for your time. Any help would be greatly appreciated.

  Read the article

• Avoid putty ssh terminal to crash when disconnecting from server

  - by JBoy

  I'm connecting via ssh to a remote 'live' server where i have some bash scripts automated via the crontab, when an error happens in some of the automation scripts within the server, the connection to the server is killed, this is fine to me, but the problem is that Putty closes the entire window, which is a behavior i don't want. I have checked all around the web, unfortunately the putty site does not have a support page, but nothing. Under putty's option i have tried all the menus expanding all options, but still i cant find the right one, i would expect it to be under Windowbehaviour Do you have an advice? Thx

  Read the article

• Safe to use high port numbers? (re: obscuring web services)

  - by sofakng

  I have a small home network and I'm trying to balance the need for security versus convenience. The safest way to secure internal web servers is to only connect using VPNs but this seems overkill to protect a DVRs remote web interface (for example). As a compromise, would it be better to use very large ports numbers? (eg. five digits up to 65531) I've read that port scanners typically only scan the first 10,000 ports so using very high port numbers is a bit more secure. Is this true? Are there better ways to protect web servers? (ie. web guis for applications)

  Read the article

• How to make a backup VPN server?

  - by akalenuk

  I have a small VPN network with a bunch of clients working mostly with each other and a VPN server. Everything works fine, except, obviously I can't shut VPN server down without breaking the network. I have a spare machine, which worked as an VPN server for the same network before so it is signed with the same SA as the first one and basically configured just the same as the first one. Technically I can make my clients work with it with little adjustment (by setting remote in etc/openpvn/clientx.conf), but it would be great make this switch automated. So basically I want two VPN servers running in the same network to work completely interchangeable without clients even knowing this. Can I do this with VPN or should I dig deeper into physical network layer?

  Read the article

• Tools to manage bunches of servers

  - by Stan

  Platform: most of them are Windows Server 2003, some are CentOS 5 Say if there're many game servers, is there any tools for engineers to easily manage? Below are some requirements. allow RDP (remote desktop) to servers. has group/permission setting. Classify by different functionality. So for people has permission to access certain group, they don't need further enter pwd to RDP servers, the tool will automatically log on the server. log activities: history about who has log on what server. Thanks.

  Read the article

• let CRON send emails through SMTP ( debian squeeze )

  - by supernova

  i would like to send emails whenever a cronjob has completed, i read that this is possible with exim4. in /etc/alias i added the line myuser: [email protected] in /etc/exim4/update-exim4.conf.conf i set dc_smarthost='smtp.myserver.ip::25 and in /etc/exim4/passwd.client i set smtp.myserver.ip:[email protected]:mypassword my problem is that i can't see any login at my mailserver, and in the exim logs i saw a few lines with 2012-10-13 09:17:01 1TMvy1-0001fp-F2 ** [email protected] R=nonlocal: Mailing to remote domains not supported 2012-10-13 09:17:01 1TMvy1-0001fr-JE <= <> R=1TMvy1-0001fp-F2 U=Debian-exim P=local S=17426 are there any additional config settings i have to set? edit : i solved the prev. error by running dpkg-reconfigure, but now i'm facing the following error <root@debian> R=dnslookup T=remote_smtp defer (-53): retry time not reached for any host

  Read the article

• a safer no password sudo?

  - by Stacia

  Ok, here's my problem - Please don't yell at me for being insecure! :) This is on my host machine. I'm the only one using it so it's fairly safe, but I have a very complex password that is hard to type over and over. I use the console for moving files around and executing arbitrary commands a LOT, and I switch terminals, so sudo remembering for the console isn't enough (AND I still have to type in my terrible password at least once!) In the past I have used the NOPASSWD trick in sudoers but I've decided to be more secure. Is there any sort of compromise besides allowing no password access to certain apps? (which can still be insecure) Something that will stop malware and remote logins from sudo rm -rf /-ing me, but in my terminals I can type happily away? Can I have this per terminal, perhaps, so just random commands won't make it through? I've tried running the terminal emulations as sudo, but that puts me as root.

  Read the article

• Can I run Win7 virtualized for my HTPC?

  - by Daniel Schaffer

  I'm currently running Vista for my HTPC, and am planning on upgrading to Win7 soon. However, I've been considering installing it as a VM so that I can run Windows Server 2008 and/or Windows Home Server. The single requirement is that the HTPC must boot up to Windows Media Center with absolutely no user intervention. I need to be able to hit the power button have it go. I've got this working currently, so I don't need to keep a keyboard or mouse plugged in - all I use is my remote. If possible, I'd love to be able to do these other things: Use Win2k8 Server as a VM host for Win7 Pro and WHS. This also lets me run IIS7 for doing ASP.NET development Use WHS for all the wonderful things it does for a home network Are either of the two optional things possible while meeting the WMC requirement?

  Read the article

• Safe to use high port numbers? (re: obscuring web services)

  - by sofakng

  I have a small home network and I'm trying to balance the need for security versus convenience. The safest way to secure internal web servers is to only connect using VPNs but this seems overkill to protect a DVRs remote web interface (for example). As a compromise, would it be better to use very large ports numbers? (eg. five digits up to 65531) I've read that port scanners typically only scan the first 10,000 ports so using very high port numbers is a bit more secure. Is this true? Are there better ways to protect web servers? (ie. web guis for applications)

  Read the article

• IE session (-nomerge) manager

  - by skrco

  I'm looking for an application that can manage (save/open) multiple Internet Explorer instances (to be precise nomerge sessions), host them in single window and arrange these instances e.g. in tabs, so in result you have double tab bar. In functionality it's similar to Remote Desktop Manager, where you can create Web session, but in embedded mode you cannot set the nomerge option. I've been searching the web, but with no results. So I put this question whether anyone know of such application or workaround. Or I have to write my own app.

  Read the article

< Previous Page | 369 370 371 372 373 374 375 376 377 378 379 380  | Next Page >