Search Results

Search found 15651 results on 627 pages for 'setup'.

Page 373/627 | < Previous Page | 369 370 371 372 373 374 375 376 377 378 379 380  | Next Page >

• Windows Server 2003: Nat Port Forwarding Not Working

  - by jM2.me

  The setup is following: Internet (108.99.XXX.XX) <- Windows Server 2003 (10.0.0.1) <- Switch <- Office Computers (10.0.0.100-200 some static routes some manual some automatic) Windows Server has NAT installed on it and two network interfaces are configured properly. The problem is, whenever I try to forward port 80 (or any other) from office computer (lets say 10.0.0.100), it fails. Nic #1 Settings: All settings are obtained from ISP Nic #2 Settings: Set manually IP: 10.0.0.1 Mask: 255.255.255.0 Nat Server is configured to automatically assign IP addresses to private network. Settings are: IP: 10.0.0.0 Mask: 255.255.255.0 Forwarding was done in Routing and Remote Access (local) - IP Routing - NAT/Basic Firewall - Local Area Connection (right click_properties) - services and ports - Web Server HTTP - Private Address: 10.0.0.100 SO what is causing the problem of failure to forward any port from other computer inside private network?

  Read the article

• Best practice for administering a (hadoop) cluster

  - by Alex

  Dear all, I've recently been playing with Hadoop. I have a six node cluster up and running - with HDFS, and having run a number of MapRed jobs. So far, so good. However I'm now looking to do this more systematically and with a larger number of nodes. Our base system is Ubuntu and the current setup has been administered using apt (to install the correct java runtime) and ssh/scp (to propagate out the various conf files). This is clearly not scalable over time. Does anyone have any experience of good systems for administering (possibly slightly heterogenous: different disk sizes, different numbers of cpus on each node) hadoop clusters automagically? I would consider diskless boot - but imagine that with a large cluster, getting the cluster up and running might be bottle-necked on the machine serving the OS. Or some form of distributed debian apt to keep the machines native environment synchronised? And how do people successfully manage the conf files over a number of (potentially heterogenous) machines? Thanks very much in advance, Alex

  Read the article

• LDAP replication breaking referrals

  - by MasterZ

  We have an issue that we believe is caused by ldap replication changing the port of the referal from 686 (secure) to 389 (unsecure). If we setup a new referral everything works, but then as soon as we change someone's password it changes on the master, and then the master replicates and the referral breaks. Any further attempts to modify someone's account give the error "PAM: Cannot connect to LDAP". We used snoop and monitored the firewall to see what was going on. The first password attempt (the one that works) goes over port 686 (as it is supposed to) but every subsequent attempt attempts to use port 389, and therefore fails. We only have 1 referral configured on the client, port 686

  Read the article

• Group policies - WSUS

  - by cory

  Hello, I am really lost as to what is the reason as to why my group policy is not working on my domain. I have setup a GPO for my wsus server to a specific OU in my domain. It seems as of right now, none of my machines have inherited that GPO. I have manually put it in quite a few computers. Most of my computers in the domain are linked up to my wsus server, but all my desired settings are not there. If I run gpresult /R, On one computer I ran this on, it is linking to my backup domain controller and not my main. On another computer I checked this on, it is linking to my main DC, but it did no inherit the GPO. When looking on my DC on gpmc - I see the policy is forced to the OU as #1 precedence. Thank for any help.

  Read the article

• SQL Server 2005/2008 Licensing Decision

  - by Hakim

  Hello, I have purchased a dedicated server from a reputable Hosting company. They only have Windows Server 2008 OS installed on it and NO Sql server. Server Configuration is Intel Dual core Processor with 2GB of RAM and 100GB HDD. I wanted to host my web services on that server which will be using the MS SQL Server 2005 at the backend.There are multiple web services and each using a different Database. Microsoft has CAL basis Licensing , Which I understand is based on number of users accessing the database directly ( I may be wrong ) . But my users will be accessing the webservice and no direct connection to the database as such. Yes but the number of users accessing the web server cannot be known and is not under my control. Which Licensing is best suited for this kind of setup ? I don't need analysing and BI services right now ,but i may want to upgrade that in future may be. Any help will be appreciated. Thanks

  Read the article

• Setting up a transparent proxy with only one box.

  - by Scott Chamberlain

  I am playing around with transparent proxies, unfortunately I do not have two machines to test it out with. The current way I am doing things is the program makes a request to a computer on port 80, I use iptables -t nat -A OUTPUT -p tcp --destination-port 80 -j REDIRECT --to-port 1234 to redirect to my proxy that I am playing with. the proxy will send out a request to port 81 (as all outbound port 80 are being fed back in to the proxy so I want to do something like iptables -t nat -A OUTPUT -p tcp --destination-port 81 -j DNAT --to-destination xxxx:80 The problem lies with the xxxx part. How do I change the destination port without changing changing the destination ip? Or am I doing this setup completely wrong, I am learning after all and constructive criticism is definitely appreciated. The machine I am using is pretty low end so I would like not not have to create a VM with a second box unless absolutely necessary.

  Read the article

• Synergy configuration with multiple X screens

  - by Rob Drimmie

  I'm having a problem figuring out how to configure synergy to behave on a system with multiple X windows. On my desktop I am running Ubuntu 10.04 LTS. I have two monitors, setup as separate X screens by preference as well as to enable me to rotate the left-hand monitor. I also have a laptop, which I have on the desk in front of me, lower than the other two monitors. I have a very simple synergy.conf: section: screens desktop: laptop.local: end section: links desktop: down = laptop laptop: up = desktop end It works, but on the desktop only on whichever screen I run synergys from in terminal (I haven't set it up to run at startup yet because I've been playing with the configuration). I can't find any information how to reference multiple screens on one system, and would appreciate any help.

  Read the article

• ASP Fails with 500 Error

  - by VinceM

  We have a server setup as an IIS box and have some static pages with a few asp pages that handle the form submissions. The asp is really vbscript that sends a CDO message. When moving these pages to the new server the form will not submit, it gives a 500 error and the following shows in Event Viewer: Error: The Template Persistent Cache initialization failed for Application Pool 'DefaultAppPool' because of the following error: Could not create a Disk Cache Sub-directory for the Application Pool. The data may have additional error codes.. I can't seem to find any info on this anywhere... I was thinking it may have something to do with the fact that we created this server from an image of another server. Thanks for your help in advance... Vince

  Read the article

• some issues with removing www and redirecting index.html

  - by MariaKeys

  Hello Fellas, I am having trouble doing what i want to do with the following setup. I would like to remove all WWW, and also forward index.html to root dir. I would like this to be for all domains, so i am doing inside httpd.conf directory directive. I tried many variations with no success. Latest version is below (domains are inside /var/www/html, in seperate directories). http://www.example.com/index.html > http://example.com http://www.example.com/someother/index.html > http://example.com/someother/ Thanks, Maria <Directory "/var/www/html/*/"> RewriteEngine on RewriteBase / RewriteCond %{HTTP_HOST} ^www\.(.+)$ [NC] RewriteRule ^(.*)$ http://%1/$1 [R=301,L] #RewriteCond %{REQUEST_URI} /^index\.html/ RewriteRule ^(.*)index\.html$ / [R=301,L] Options ExecCGI Includes FollowSymLinks AllowOverride AuthConfig AllowOverride All Order allow,deny Allow from all </Directory>

  Read the article

• How can I make my PHP development environment more efficient?

  - by pixel

  I want to start a home-brew pet project in PHP. I've spent some time in my life developing in PHP and I've always felt it was hard to organize the development environment efficiently. In my previous PHP work, I've used a windows desktop machine and a linux server for development. This configuration had it's advantages: it's easy to configure Apache (and it's modules)/PHP/MySql on a linux box, and, at the time, this configuration was the same like on production server. However, I never successfully set up a debug connection between my Eclipse install and X-debug on server. Transferring files from my local workspace to the server was also very annoying (either ftp or Bazaar script moving files from repository to web root). For my new setup, I'm considering installing everything on my local machine. I'm afraid that it will slow down workstation performance (LAMP + Eclipse), and that compatibility problems will kick-in. What would you recommend? Should I develop using two separate machines? On one? Do you have experience using one of above configurations in your work?

  Read the article

• Mixed IP and Name Based Virtual Hosts with nginx

  - by nerkn

  I set up many domains but I dont know how to configure if only ip address is given. say foo.com I have a setup to go web/foo.com/htdocs, I want to 88.99.66.55 ip address like a domain to web/fook.com/htdocs server { listen 80; server_name 85.99.66.55; location / { root /home/web/fook.com/htdocs; } location ~ \.(php|php3|php4|php5)$ { root /home/web/fook.com/htdocs; include fastcgi_params; fastcgi_pass 127.0.0.1:9000; } } resulted [warn]: conflicting server name "85.105.65.219" on 0.0.0.0:80, ignored

  Read the article

• Why can't I install MySQL on my computer?

  - by Bea

  I have read a lot of tutorials, but I am still having problems. What I tried: I downloaded mysql-5.5.9-winx64. All that I read says that I can run Setup.exe, but there is no such file in the download. The other option I know there is, is including \mysql-5.5.9-winx64\bin in the PATH variable and then trying to execute the mysql command. When I do that, the error I get is: ERROR 2003 (HY000): Can't connect to MySQL server on 'localhost' (10061) I then downloaded mysql-5.5.9-winx64.msi, which is easier to install, but once I followed the instructions and it was installed, I got the same error executing the mysql command. How can I use MySQL? EDIT: I've now removed everything I installed, and I want to start from scratch.

  Read the article

• Puppet: hanging at Schedule[weekly]

  - by Andrei Serdeliuc

  Why would puppet hang at Schedule[weekly]? I'm running puppet in a masterless setup, so to apply by manifest I'm just running puppet apply /etc/puppet/manifests/site.pp In debug mode, these are the last things it says before it just hangs debug: /Schedule[never]: Skipping device resources because running on a host debug: /Schedule[daily]: Skipping device resources because running on a host debug: /Schedule[monthly]: Skipping device resources because running on a host debug: /Schedule[puppet]: Skipping device resources because running on a host debug: /Schedule[hourly]: Skipping device resources because running on a host debug: /Schedule[weekly]: Skipping device resources because running on a host If I send a SIGINT, it says Exiting debug: Storing state debug: Stored state in 0.03 seconds debug: Finishing transaction 69992657242500 Thanks

  Read the article

• VPS showing low disk space despite there is nothing major on it

  - by SheoNarayyan

  Hello experts, On my VPS server I was trying to see the used disk space and when I open My Computer it shows 17.9 GB free out of 39.8 GB it means that 21.9 GB space is used. However, when I select all files and folders from C: and try to see the total size, it just count approximately 11 GB. The difference is around 10 GB. Where is this 10 GB going if I have not stored anything else here? I asked above question from my VPS provider and he responded below Check hidden files/system files/etc. This is default windows OS and its utilization and not specific to setup. If you want specifics of usage, you can go ahead and get in touch with Microsoft support team and they'll provide you with exact specification of the same. I am sure that Windows OS must not be taking up 10 GB space for hidden files and folders. My VPS has Windows Server 2008 R2 installed. Can anyone help me in this on who is right?

  Read the article

• Exchange over HTTP

  - by Rob

  I have recently setup a brand new install of SBS 2011 and it is working well. Exchange is running as advertised and all users are happy. Now, there are 2 users who would like to work outside of the office and require email setting up in Outlook. No problem - Exchange over HTTP. However for some reason it's not working. They can access Outlook Web Access okay, but for some reason Exchange over HTTP / HTTPS isn't working. The error message I receive in Outlook is: "The name cannot be resolved. The connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this action." I've tried temporarily turning off the Firewall on both the server and the client but this doesn't help at all. Is there something I'm missing or is there a permission that needs enabling to allow Exchange over HTTP to work?? Many thanks

  Read the article

• How to limit server to specific IP addresses with mod_authz_host?

  - by BeeDog

  Hi! I am very new to this area, so please bear with me. :) Right now I am running an Apache HTTP server on my setup, a very basic configuration. The website hosted on it is accessible from anywhere, and I want to limit the access to a specific IP address range. I've looked into this and I found that one Apache module called mod_authz_host handles this. http://httpd.apache.org/docs/2.2/mod/mod_authz_host.html The problem is, I haven't managed to find documentation that explains well how to actually do the stuff. How do I actually make sure only a certain range of IP addresses can access my site/server? The machine is running Ubuntu Server 10.10, the web files are stored in /var/www/, the apache2 daemon has its stuff stored in /etc/apache2/ and /usr/lib/apache2/modules/*. Thanks in advance, and sorry if this is a stupid question!

  Read the article

• Nagios: Is it possible to have multiple IPs for a host?

  - by Aknosis

  In our office we have dual WAN setup, if our cable connection drops we still get connectivity via our T1. The only issue is that our office network is no longer available on the same IP so all Nagios check go critical because they can't connect. What'd be awesome is if I could have Nagios try IP 1 by default but if for some reason its failing on that IP try IP 2. I doubt this is possible with a default install but I'm wondering if there is any add-ons or some other magic that could make this work?

  Read the article

• Screen flickering / scrambling on an Asus UL30A

  - by user55059

  Recently my Laptop screen started to flicker. You can view the phenomena here: YouTube Sometimes the screen is totally scrambled, but most of the time it starts with the Title bar only. It happens inconsistently. My Laptop is Asus UL30A and I'm using Ubuntu 11.10. Output from command: sudo lshw -C display; lsb_release -a; uname -a; xrandr *-display:0 description: VGA compatible controller product: Mobile 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 07 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:44 memory:fe400000-fe7fffff memory:d0000000-dfffffff ioport:dc00(size=8) *-display:1 UNCLAIMED description: Display controller product: Mobile 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2.1 bus info: pci@0000:00:02.1 version: 07 width: 64 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: latency=0 resources: memory:fe800000-fe8fffff LSB Version: core-2.0-ia32:core-2.0-noarch:core-3.0-ia32:core-3.0-noarch:core-3.1-ia32:core-3.1-noarch:core-3.2-ia32:core-3.2-noarch:core-4.0-ia32:core-4.0-noarch Distributor ID: Ubuntu Description: Ubuntu 11.10 Release: 11.10 Codename: oneiric Linux steelke 3.0.0-14-generic-pae #23-Ubuntu SMP Mon Nov 21 22:07:10 UTC 2011 i686 i686 i386 GNU/Linux Screen 0: minimum 320 x 200, current 1366 x 768, maximum 8192 x 8192 LVDS1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 293mm x 164mm 1366x768 60.0*+ 1360x768 59.8 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 disconnected (normal left inverted right x axis y axis) DP1 disconnected (normal left inverted right x axis y axis) DP2 disconnected (normal left inverted right x axis y axis) I already rolled back the kernel to 3.0.0-14 instead of 3.0.0-17 as mentioned in this post, but without result. I guess the problem is related to the driver, because I don't see similar behaviour in the BIOS Setup. Any tips or help is welcome.

  Read the article

• What is a good solution for an intranet video portal (YouTube-like) site? [closed]

  - by Ken Pespisa

  I would like an easy-to-setup site to handle videos to be viewed internally by my company. YouTube is essentially the perfect solution except for its being public. I'm looking for a place where a few people can upload videos, and the system will return a page where they can watch that video in a browser. I figure this would involve a dedicated Web server to run the Web application and process the videos. I've searched and I don't think such a system exists, but I perhaps there's one out there in its infancy that doesn't rank high on Google yet. Essentially the site I'm looking for is what MediaWiki is to Wikis, or what StackExchange is to Q&A sites, but for videos.

  Read the article

• Additional Hard Drives for Servers

  - by Abs

  Hello all, I am developing a web app where I will have to save lots of files and I am just trying to work out the directory structure and where things should be saved to. I have had a look at the dedicated server I want to buy and for storage it shows this: 2x 1TB SATA in RAID1 The space is enough but I am guessing this will not be on one hard drive? I will have to save files on one hard drive and when that fills up, I have to use the other? For the Fedora distro - what is the path for the second drive? Is there a primary drive where I will be able to setup my webroot? I am sorry, this is all new to me. It would be great to links and advice on how things actually work when it comes to additional hard drives etc. Thanks all

  Read the article

• How do I automatically start Clamz with AMZ files for Amazon MP3 downloads?

  - by Takkat

  Chromium can open downloaded files with the default application (e.g. PDF in Evince). In my setup a downloaded .AMZ (for Amazon MP3) always opened with Gedit. However I would like to have all downloaded .amz files to autromatically open with Clamz, a command line tool for downloading that works like a charm. As in Nautilus my .amz files were associated to open with Gedit too I thought it was a good idea to add a clamz.desktop file in ~/.local/share/applications (according to this answer) [Desktop Entry] Encoding=UTF-8 Name=Clamz Comment=Open AMZ files for Amazon MP3 download Exec=/usr/bin/clamz %u Terminal=True Type=Application Icon= Categories=Application; StartupNotify=true MimeType=audio/x-amzxml; NoDisplay=true This lets me choose Clamz as default application in Nautilus. But when opening an .amz file in Nautilus it still does not open with Clamz as expected but is treated as an executable text file instead (note that the executable bit is not set!). Is there any other way to make Chromium or Nautilus always open an .amz file with Clamz? Did I miss to change setting in another place?

  Read the article

• no internet mail group / mail sending and delivery restrictions

  - by Jeff

  I run a win 2k8 a/d server and an win 2k8 exchange 07 server I have a group called 'No Internet Mail', i made it a distribution group. I tried to setup a transport rule on the exchange server that is configured as follows for outgoing: from a member of no internet mail and sent to users outside the organization redirect the message to administrator and send message refused, forwarded to administrator. Please talk to management for external email use. however , when i enable this it forwards everyones emails to me regardless if they are a member of the no internet mail group or not. not sure what im doing wrong, thanks in advanced.

  Read the article

• Ubuntu 12.04 dual monitor reset bug

  - by Tentresh

  My two displays are: Intel GMA x4500 Laptop (1280x800 native resolution of the built-in display) External display (1920x1080) Few minutes after I login to my dual monitor setup its get reset to mirror screens. If I restore the settings via displays application everything is fine. On each reset the following messages are written into /var/log/Xorg.0.log: [ 60.852] (II) PM Event received: Capability Changed [ 60.852] I830PMEvent: Capability change [ 132.920] (II) intel(0): EDID vendor "SEC", prod id 12869 [ 132.920] (II) intel(0): Printing DDC gathered Modelines: [ 132.920] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 134.228] (II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled Whereas right on startup or manual resolution reset /var/log/Xorg.0.log reports the expected frame buffer allocation: [ 1562.382] (II) intel(0): EDID vendor "SEC", prod id 12869 [ 1562.382] (II) intel(0): Printing DDC gathered Modelines: [ 1562.382] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 1576.740] (II) intel(0): Allocated new frame buffer 3200x1080 stride 12800, tiled Is Ubuntu 12.04 not compatible with my video card? Can this be solved within Ubuntu? I like it's interface, but manually fiddling with resolution on every login is not bearable.

  Read the article

• Virtualbox PUEL Interpretation

  - by modernzombie

  Sorry if this seems like a lame question but I want to be sure before making a decision. The Virtualbox PUEL license says “Personal Use” requires that you use the Product on the same Host Computer where you installed it yourself and that no more than one client connect to that Host Computer at a time for the purpose of displaying Guest Computers remotely. I take this to mean that if I want to setup a development server (web server) that's only used by me to do my work this falls under personal use. But if I make this server available for clients to connect to the websites to view my progress this is no longer personal use also meaning that using Vbox to run a production web server is also against the license. Again sorry if this is a dumb question but I find it hard to follow the wording used in licenses. I know I could go with OSE but I have not looked into VNC versus RDP yet. Thanks.

  Read the article

• How can I tell what command is running on the remote end of an ssh connection?

  - by user268385

  Tl;dr - how do I find the name of the command (eg $BASH_COMMAND) running on the remote end of an ssh connection? ... My example setup is two tmux vertical panes, LH pane runs a local vim session with vertical split, RH pane runs an ssh session running vim, again with a vertical split. Using tmux-navigator I can navigate from left to right over the first 3 vim buffers, but the 4th (far right hand one) is inaccessible. The reason for this is that tmux-navigator tests the value of 'pane_current_command' and compares it to 'vim' before deciding which keystrokes to dispatch. On the right hand tmux pane, the current command is 'ssh' and not 'vim'. What I want to do is test for (pane_current_command =~ 'ssh'), and if so, examine the command that is running on the far side of the connection? I cannot find a way to get hold of this, so any suggestions would be welcome? For information, the problem is almost the same as this one, but without the nested tmux sessions: https://github.com/christoomey/vim-tmux-navigator/issues/12

  Read the article

< Previous Page | 369 370 371 372 373 374 375 376 377 378 379 380  | Next Page >