Search Results

Search found 10978 results on 440 pages for 'collision testing'.

Page 374/440 | < Previous Page | 370 371 372 373 374 375 376 377 378 379 380 381  | Next Page >

• What algorithm can I use to determine points within a semi-circle?

  - by khayman218

  I have a list of two-dimensional points and I want to obtain which of them fall within a semi-circle. Originally, the target shape was a rectangle aligned with the x and y axis. So the current algorithm sorts the pairs by their X coord and binary searches to the first one that could fall within the rectangle. Then it iterates over each point sequentially. It stops when it hits one that is beyond both the X and Y upper-bound of the target rectangle. This does not work for a semi-circle as you cannot determine an effective upper/lower x and y bounds for it. The semi-circle can have any orientation. Worst case, I will find the least value of a dimension (say x) in the semi-circle, binary search to the first point which is beyond it and then sequentially test the points until I get beyond the upper bound of that dimension. Basically testing an entire band's worth of points on the grid. The problem being this will end up checking many points which are not within the bounds.

  Read the article

• Access Controller Context/ TempData from business objects

  - by thanikkal

  I am trying to build a session/tempdata provider that can be swapped. The default provider will work on top of asp.net mvc and it needed to access the .net mvc TempData from the business object class. I know the tempdata is available through the controller context, but i cant seem to find if that is exposed through HttpContext or something. I dont really want to pass the Controller context as an argument as that would dilute my interface definition since only asp.net based session provider needs this, other (using NoSQL DB etc) doesn't care about Controller Context. To clarify further, adding little more code here. my ISession interface look like this. and when this code goes to production, the session/tempdata is expected to work using NoSql db. But i also like to have another implementation that works on top of asp.net mvc session/tempdata for my dev testing etc. public interface ISession { T GetTempData<T>(string key); void PutTempData<T>(string key, T value); T GetSessiondata<T>(string key); void PutSessiondata<T>(string key, T value); }

  Read the article

• regex match css class name from single string containing multiple classes

  - by effectica

  I have a long string that contains multiple css classes. With regex I would like to match every class name as I then need to replace these class names like so: <span>CLASSNAME</span> I have tried for hours to come up with a solution and I think I am close however for certain class names I am not able to exclude closing curly brackets from the match. Here is a sample string I have been carrying out testing on: #main .items-Outer p{ font-family:Verdana; color: #000000; font-size: 50px; font-weight: bold; }#footer .footer-inner p.intro{ font-family:Arial; color: #444444; font-size: 30; font-weight: normal; }.genericTxt{ font-family:Courier; color: #444444; font-size: 30; font-weight: normal; } And here is the the regex I came up with so far: ((^(?:.+?)(?:[^{]*))|((?:\})(?:.+?)(?:[^{]*))) Please look at the screenshot I am attaching as it will show more clearly the matches I get. My problem is that I would obviously like to exclude curly brackets from any match.

  Read the article

• How to separate sets of numbers onto separate lines

  - by Fred

  About the script: The script below will create 300 sets of random characters. What is presently happening, is that it creates them but shows them all on one line, in one big chunk. With all the searching and testing I've done to try and achieve this, I have had no success. I would like to know which code and where to put it, so that each SET (300) of 15 characters long, will show and be saved to file. Here is my script: <?php function GetID($x){ $characters = array_merge(range('A','Z'),range('a','z'),range(2,9)); shuffle($characters); for($x=0;$x<=299;$x++){ } for (; strlen($ReqID)<$x;){ $ReqID .= $characters[mt_rand(0, count($characters))]; } return $ReqID; } $ReqID .= GetID(5); $ReqID .= "-"; $ReqID .= GetID(5); $ReqID .= "-"; $ReqID .= GetID(5); echo $ReqID; $fh = fopen("file.txt","a+"); fwrite($fh, ("$ReqID")."\n"); fclose($fh); ?>

  Read the article

• App crashes frequently at time when UIActionSheet would be presented

  - by Jim Hankins

  I am getting the following error intermittently when a call is made to display an action sheet. Assertion failure in -[UIActionSheet showInView:] Terminating app due to uncaught exception 'NSInternalInconsistencyException', reason: 'Invalid parameter not satisfying: view != nil' Now in this case I've not changed screens. The UIActionSheet is presented when a local notification is fired and I have an observer call a local method on this view as such: I have the property marked as strong. When the action sheet is dismissed I also set it to nil. I am using a story board for the UI. It's fairly repeatable to crash it, perhaps less than 5 tries. (Thankfully I have that going for me). Any suggestions what to try next? I'm really pulling my hair out on this one. Most of the issues I've seen on this topic are pointing to the crash occurring once the selection is made. In my case it's at presentation and intermittently. Also for what it's worth, this particular view is several stacks deep in an embedded navigation controller. Hometableviewdetail selectviewController in question. This same issue occurs so far in testing on iOS 5.1 and iOS 6. I'm presuming it's something to do with how the show InView is being targeted. self.actionSheet = [[UIActionSheet alloc] initWithTitle:@"Select Choice" delegate:self cancelButtonTitle:@"Not Yet" destructiveButtonTitle:@"Do this Now" otherButtonTitles:nil]; [self.actionSheet showInView:self.parentViewController.tabBarController.view];

  Read the article

• MSSQL 2005 FOR XML

  - by Lima

  Hi, I am wanting to export data from a table to a specifically formated XML file. I am fairly new to XML files, so what I am after may be quite obvious but I just cant find what I am looking for on the net. The format of the XML results I need are: <data> <event start="May 28 2006 09:00:00 GMT" end="Jun 15 2006 09:00:00 GMT" isDuration="true" title="Writing Timeline documentation" image="http://simile.mit.edu/images/csail-logo.gif"> A few days to write some documentation </event> </data> My table structure is: name VARCHAR(50), description VARCHAR(255), startDate DATETIME, endDate DATETIME (I am not too interested in the XML fields image or isDuration at this point in time). I have tried: SELECT [name] ,[description] ,[startDate] ,[endTime] FROM [testing].[dbo].[time_timeline] FOR XML RAW('event'), ROOT('data'), type Which gives me: <data> <event name="Test1" description="Test 1 Description...." startDate="1900-01-01T00:00:00" endTime="1900-01-01T00:00:00" /> <event name="Test2" description="Test 2 Description...." startDate="1900-01-01T00:00:00" endTime="1900-01-01T00:00:00" /> </data> What I am missing, is the description needs to be outside of the event attributes, and there needs to be a tag. Is anyone able to point me in the correct direction, or point me to a tutorial or similar on how to accomplish this? Thanks, Matt

  Read the article

• Supress output from Visual Studio output pane (C++)

  - by Ryan Ginstrom

  When I run my Win32 project in the Visual Studio debugger, I get this huge screed of output about which DLLs were loaded, first-chance exceptions, and so on. Is there a way that I can suppress this output? Some day, I might want to know when 'C:\Windows\SysWOW64\ntdll.dll' was loaded, but normally I don't care. This is especially true when I'm running unit tests, and just want to be told whether any of the tests failed. This stuff isn't output with console applications, but it is with windows applications. To give an example of what I mean, here are the first lines from the output of a recent unit-test run. 'MyProject.exe': Loaded 'C:\dev\MyProject\Testing\MyProject.exe', Symbols loaded. 'MyProject.exe': Loaded 'C:\Windows\SysWOW64\ntdll.dll' 'MyProject.exe': Loaded 'C:\Windows\SysWOW64\kernel32.dll' 'MyProject.exe': Loaded 'C:\Windows\SysWOW64\KernelBase.dll' 'MyProject.exe': Loaded 'C:\Windows\SysWOW64\dbghelp.dll' 'MyProject.exe': Loaded 'C:\Windows\SysWOW64\msvcrt.dll' 'MyProject.exe': Loaded 'C:\Windows\SysWOW64\user32.dll' 'MyProject.exe': Loaded 'C:\Windows\SysWOW64\gdi32.dll' 'MyProject.exe': Loaded 'C:\Windows\SysWOW64\lpk.dll' 'MyProject.exe': Loaded 'C:\Windows\SysWOW64\usp10.dll' 'MyProject.exe': Loaded 'C:\Windows\SysWOW64\advapi32.dll' ... and on and on ...

  Read the article

• PDFBox: Problem with converting pdf page into image

  - by user552910

  My mission is pretty simple: converting every single page of a pdf file into images. I tried using icepdf open source version to generate the images but they don't generate the image with the correct font. So I start using PDFBox instead. The code is the following: PDDocument document = PDDocument.load(new File("testing.pdf")); List<PDPage> pages = document.getDocumentCatalog().getAllPages(); for (int i = 0; i < pages.size(); i++) { PDPage singlePage = pages.get(i); BufferedImage buffImage = convertToImage(singlePage, 8, 12); ImageIO.write(buffImage, "png", new File(PdfUtil.DATA_OUTPUT_DIR+(count++)+".png")); } The font looks good, but the pictures within the pdf file look fainted out (See the attachment). I look into the source code but I still have no clue how to fix it. Do you guys have any idea what's going on? Please help. Thanks!!

  Read the article

• Javamail doesn't send a mail

  - by Jose Hdez

  I am developing a Java application and I am using Javamail to send a mail. My code is the following: Properties props = new Properties(); props.put("mail.smtp.host", "diana.cartif.es"); props.put("mail.smtp.socketFactory.port", "465"); props.put("mail.smtp.socketFactory.class","javax.net.ssl.SSLSocketFactory"); props.put("mail.smtp.auth", "true"); props.put("mail.smtp.port", "465"); Session session = Session.getDefaultInstance(props, new javax.mail.Authenticator() { protected PasswordAuthentication getPasswordAuthentication() { return new PasswordAuthentication("alerts","pass"); } }); Message message = new MimeMessage(session); message.setFrom(new InternetAddress("[email protected]")); message.setRecipients(Message.RecipientType.TO,InternetAddress.parse("[email protected]")); message.setSubject("Testing Subject"); message.setText("Dear Mail Crawler," +"\n\n No spam to my email, please!"); Transport.send(message); However when I execute this code it throws an Exception: javax.mail.MessagingException: Could not connect to SMTP host: diana.cartif.es, port: 465, response: -1 at com.sun.mail.smtp.SMTPTransport.openServer(SMTPTransport.java:1960) at com.sun.mail.smtp.SMTPTransport.protocolConnect(SMTPTransport.java:642) at javax.mail.Service.connect(Service.java:317) at javax.mail.Service.connect(Service.java:176) at javax.mail.Service.connect(Service.java:125) at javax.mail.Transport.send0(Transport.java:194) at javax.mail.Transport.send(Transport.java:124) at com.cartif.data.MainConnection.getFTPConnection(MainConnection.java:106) at com.cartif.main.Main.connectToServer(Main.java:72) at com.cartif.main.Main.main(Main.java:60) Data to connect is right because I checked it in my Mail Server. Could someone help me please? Thanks!

  Read the article

• How can I have 2 ADO access methods use the same Transaction?

  - by KevinDeus

  I'm writing a test to see if my LINQ to Entity statement works.. I'll be using this for others if I can get this concept going.. my intention here is to INSERT a record with ADO, then verify it can be queried with LINQ, and then ROLLBACK the whole thing at the end. I'm using ADO to insert because I don't want to use the object or the entity model that I am testing. I figure that a plain ADO INSERT should do fine. problem is.. they both use different types of connections. is it possible to have these 2 different data access methods use the same TRANSACTION so I can roll it back?? _conn = new SqlConnection(_connectionString); _conn.Open(); _trans = _conn.BeginTransaction(); var x = new SqlCommand("INSERT INTO Table1(ID, LastName, FirstName, DateOfBirth) values('127', 'test2', 'user', '2-12-1939');", _conn); x.ExecuteNonQuery(); //So far, so good. Adding a record to the table. //at this point, we need to do **_trans.Commit()** here because our Entity code can't use the same connection. Then I have to manually delete in the TestHarness.TearDown.. I'd like to eliminate this step //(this code is in another object, I'll include it for brevity. Imagine that I passed the connection in) //check to see if it is there using (var ctx = new XEntities(_conn)) //can't do this.. _conn is not an EntityConnection! { var retVal = (from m in ctx.Table1 where m.first_name == "test2" where m.last_name == "user" where m.Date_of_Birth == "2-12-1939" where m.ID == 127 select m).FirstOrDefault(); return (retVal != null); } //Do test.. Assert.BlahBlah(); _trans.Rollback();

  Read the article

• Parsing XHTML with inline tags

  - by user290796

  Hi, I'm trying to parse an XHTML document using TBXML on the iPhone (although I would be happy to use either libxml2 or NSXMLParser if it would be easier). I need to extract the content of the body as a series of paragraphs and maintain the inline tags, for example: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.1//EN" "http://www.w3.org/TR/xhtml11/DTD/xhtml11.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en"> <head> <title>Title</title> <link rel="stylesheet" href="css/style.css" type="text/css"/> <meta http-equiv="Content-Type" content="application/xhtml+xml; charset=utf-8"/> </head> <body> <div class="body"> <div> <h3>Title</h3> <p>Paragraph with <em>inline</em> tags</p> <img src="image.png" /> </div> </div> </body> </html> I need to extract the paragraph but maintain the <em>inline</em> content with the paragraph, all my testing so far has extracted that as a subelement without me knowing exactly where it fitted in the paragraph. Can anyone suggest a way to do this? Thanks.

  Read the article

• NoSQL for filesystem storage organization and replication?

  - by wheaties

  We've been discussing design of a data warehouse strategy within our group for meeting testing, reproducibility, and data syncing requirements. One of the suggested ideas is to adapt a NoSQL approach using an existing tool rather than try to re-implement a whole lot of the same on a file system. I don't know if a NoSQL approach is even the best approach to what we're trying to accomplish but perhaps if I describe what we need/want you all can help. Most of our files are large, 50+ Gig in size, held in a proprietary, third-party format. We need to be able to access each file by a name/date/source/time/artifact combination. Essentially a key-value pair style look-up. When we query for a file, we don't want to have to load all of it into memory. They're really too large and would swamp our server. We want to be able to somehow get a reference to the file and then use a proprietary, third-party API to ingest portions of it. We want to easily add, remove, and export files from storage. We'd like to set up automatic file replication between two servers (we can write a script for this.) That is, sync the contents of one server with another. We don't need a distributed system where it only appears as if we have one server. We'd like complete replication. We also have other smaller files that have a tree type relationship with the Big files. One file's content will point to the next and so on, and so on. It's not a "spoked wheel," it's a full blown tree. We'd prefer a Python, C or C++ API to work with a system like this but most of us are experienced with a variety of languages. We don't mind as long as it works, gets the job done, and saves us time. What you think? Is there something out there like this?

  Read the article

• Is Google Mock a good mocking framework ?

  - by des4maisons

  I am pioneering unit testing efforts at my company, and need need to choose a mocking framework to use. I have never used a mocking framework before. We have already chosen Google Test, so using Google Mock would be nice. However, my initial impressions after looking at Google Mock's tutorial are: The need for re-declaring each method in the mocking class with a MOCK_METHODn macro seems unnecessary and seems to go against the DRY principle. Their matchers (eg, the '_' in EXPECT_CALL(turtle, Forward(_));) and the order of matching seem almost too powerful. Like, it would be easy to say something you don't mean, and miss bugs that way. I have high confidence in google's developers, and low confidence in my own ability to judge mocking frameworks, never having used them before. So my question is: Are these valid concerns? Or is there no better way to define a mock object, and are the matchers intuitive to use in practice? I would appreciate answers from anyone who has used Google Mock before, and comparisons to other C++ frameworks would be helpful.

  Read the article

• Negative number representation across multiple architechture

  - by Donotalo

  I'm working with OKI 431 micro controller. It can communicate with PC with appropriate software installed. An EEPROM is connected in the I2C bus of the micro which works as permanent memory. The PC software can read from and write to this EEPROM. Consider two numbers, B and C, each is two byte integer. B is known to both the PC software and the micro and is a constant. C will be a number so close to B such that B-C will fit in a signed 8 bit integer. After some testing, appropriate value for C will be determined by PC and will be stored into the EEPROM of the micro for later use. Now the micro can store C in two ways: The micro can store whole two byte representing C The micro can store B-C as one byte signed integer, and can later derive C from B and B-C I think that two's complement representation of negative number is now universally accepted by hardware manufacturers. Still I personally don't like negative numbers to be stored in a storage medium which will be accessed by two different architectures because negative number can be represented in different ways. For you information, 431 also uses two's complement. Should I get rid of the headache that negative number can be represented in different ways and accept the one byte solution as my other team member suggested? Or should I stick to the decision of the two byte solution because I don't need to deal with negative numbers? Which one would you prefer and why?

  Read the article

• How can I share an entity framework model across website users

  - by richardmoss

  Hello, Currently my website is based around MVC and the Entity Framework running against a SQL Server 2005 database. So far, it has all been running very smoothly, and I really enjoy MVC and its slimmer more concise code (and no huge viewstates or soul destroying postbacks ;)) Recently I was working on upgrading the site to use a simple forum system, and this is where I started running into problems. When I was testing the site using two different browsers, if I created or replied to a post in one browser, the other browser couldn't see the post. At the moment, each visitor to the site gets their own copy of the entity model, which I store in their session data. Obviously this is the problem as updates to one model aren't getting carried to the other. As a test, I tried storing a single copy of the model which all visitors would access by assigning the model to a static variable. This worked, and both browsers could see each others modifications. However, it had its side effects. For example, if I fired up both browsers at the same time and the model was initialized, one browser would crash, and the other would work fine, despite me using a locking object so in theory one of them should have been delayed until the model was ready (of course I could have implemented this wrong ;)). Also, originally this site did use one model for all visitors and when it was live, it frequently shut down - killing the IIS application pool while it did. Now I'm not sure if this was related, but I don't really want to reintroduce whatever bug I had that caused this shut down. So, my question is a simple one really - what is the best way of either using the same model for all website users so they all see updates, or if they do have separate copies (which I imagine will have a performance impact in time) how can the models detect changes in the database and update themselves according. Thanks in advance for any advice! Regards; Richard Moss

  Read the article

• Logging in "Java Library Code" libs for Android applications

  - by K. Claszen

  I follow the advice to implement Android device (not application!) independent library code for my Android Apps in a seperate "Java Library Code" project. This makes testing easier for me as I can use the standard maven project layout, Spring test support and Continuous Build systems the way I am used to. I do not want to mix this inside my Android App project although this might be possible. I now wonder how to implement logging in this library. As this library will be used on the Android device I would like to go with android.util.Log. I added the followind dependency to my project to get the missing Android packages/classes and dependencies: <dependency> <groupId>com.google.android</groupId> <artifactId>android</artifactId> <version>2.2.1</version> <scope>provided</scope> </dependency> But this library just contains stub method (similar to the android.jar inside the android-sdk), thus using android.util.Log results in java.lang.RuntimeException: Stub! when running my unit tests. How do I implement logging which works on the Android device but does not fail outside (I do not expect it to work, but it must not fail)? Thanks for any advice Klaus For now I am going with the workaround to catch the exception outside android but hope there is a better solution. try { Log.d("me", "hello"); } catch (RuntimeException re) { // ignore failure outside android }

  Read the article

• PHP file upload issue

  - by Varun

  I am working on a PHP based, ticket management system. While creating a ticket, one can upload an attachment. I want to put a limit (say 10 MB) per file upload. To implement this I plan the following- 1. In php.ini set post_max_size = 10M 2.In PHP script which receives the POST- Since the file is larger than post_max_size, $_FILES[] will be empty. But I can still check the content-length header and discard the upload, if size more than 10M. While testing this I tried uploading a file of 1 GB and analysed the http traffic and this is what I found. - the entire 1 GB data is first uploaded to a to the server temporarily and discarded once the http request completes. Though I couldn't exactly find out where the file was getting saved(as it was not there in the temporary directory in the server.), but my http traffic analyzer showed that the browser did send 1 GB data to the server. - the PHP script execution started only after completion of the http request(i.e after uploading the entire 1 GB) Now I have 2 concerns: a) People may exploit my server bandwidth by trying to upload large file, which I will have to discard anyways. b) Even worse, if someone starts uploading a huge file (say 100 GB), entire 100 GB data is first uploaded to the server temporarily, that means for that period, it will consume that much of memory on my server. What's the common solution for this. Am I missing something here?

  Read the article

• How do the operators < and > work with pointers?

  - by Øystein

  Just for fun, I had a std::list of const char*, each element pointing to a null-terminated text string, and ran a std::list::sort() on it. As it happens, it sort of (no pun intended) did not sort the strings. Considering that it was working on pointers, that makes sense. According to the documentation of std::list::sort(), it (by default) uses the operator < between the elements to compare. Forgetting about the list for a moment, my actual question is: How do these (, <, =, <=) operators work on pointers in C++ and C? Do they simply compare the actual memory addresses? char* p1 = (char*) 0xDAB0BC47; char* p2 = (char*) 0xBABEC475; e.g. on a 32-bit, little-endian system, p1 p2 because 0xDAB0BC47 0xBABEC475? Testing seems to confirm this, but I thought it'd be good to put it on StackOverflow for future reference. C and C++ both do some weird things to pointers, so you never really know...

  Read the article

• How to decide between using PLINQ and LINQ at runtime?

  - by Hamish Grubijan

  Or decide between a parallel and a sequential operation in general. It is hard to know without testing whether parallel or sequential implementation is best due to overhead. Obviously it will take some time to train "the decider" which method to use. I would say that this method cannot be perfect, so it is probabilistic in nature. The x,y,z do influence "the decider". I think a very naive implementation would be to give both 1/2 chance at the beginning and then start favoring them according to past performance. This disregards x,y,z, however. I suspect that this question would be better answered by academics than practitioners. Anyhow, please share your heuristic, your experience if any, your tips on this. Sample code: public interface IComputer { decimal Compute(decimal x, decimal y, decimal z); } public class SequentialComputer : IComputer { public decimal Compute( ... // sequential implementation } public class ParallelComputer : IComputer { public decimal Compute( ... // parallel implementation } public class HybridComputer : IComputer { private SequentialComputer sc; private ParallelComputer pc; private TheDecider td; // Helps to decide between the two. public HybridComputer() { sc = new SequentialComputer(); pc = new ParallelComputer(); td = TheDecider(); } public decimal Compute(decimal x, decimal y, decimal z) { decimal result; decimal time; if (td.PickOneOfTwo() == 0) { // Time this and save result into time. result = sc.Compute(...); } else { // Time this and save result into time. result = pc.Compute(); } td.Train(time); return result; } }

  Read the article

• jQuery display text nested in paragraphs inside a div

  - by user961627

  I have HTML that looks something like this: <div class='textbox' data-title='Sometitle'> <div class='textareaedit'> <p><strong>Test sample text</strong></p> </div> </div> I'm sometimes going to have a few different <p> tags inside the textareaedit divs, and sometimes strong tags around the text inside the <p> (as in this example), and sometimes a span tag, and sometimes it's going to be without further tags inside the <p>. I want to iterate through each textbox on my page, grab its title and also the text nested inside <p> tags in textareaedit. I'm giving the output via console for testing. This is my jQuery code, but I get no output for the second console.log() line: $('.textbox').each(function() { $this = $(this); console.log($this.attr('data-title')+ ":\n"); $this.children('textareadit').children('p').each(function(){ console.log($(this).html()); // not giving any output, it's blank }); }); I tried $(this).text() as well, but no difference. You may think this example has the sample text inside <strong> tags within the <p>, but I've also tried the same example without the strong, where the text was the direct child of <p>, but it didn't make a difference. How can I capture the text?

  Read the article

• Static Variables somehow maintaining state?

  - by gfoley

  I am working on an existing project, setup by another coder. I'm having some trouble understanding how state is being maintained between pages. There is a Class library which has some helper objects. Mostly these objects are just used for there static methods and rarely instantiated or inherited. This is an example class I'm testing with. public sealed class Application { public static string Test; } Now when i run something like the following in the base class of my page, I would expect the result to be "1: 2:Test" all the time (note that "1" is empty), but strangly its only this way the first time it is run. Then every time afterwards its "1:Test 2:Test". Somehow its maintaining the state of the static variable between pages and being refreshed?? Response.Write("1:" + SharedLibrary.Application.Test); SharedLibrary.Application.Test = "Test"; Response.Write(" 2:" + SharedLibrary.Application.Test); I need to create more classes like this, but want to understand why this is occurring in the first place. Many Thanks

  Read the article

• How can I invoke a .Net DLL from a LabView 6.1 VI?

  - by tw1k

  I work in a manufacturing company that uses LabView for testing the devices we make. Most of the test engineers are using 7.1 which can natively reference a .Net assembly. However, there is a group that is stuck on LabView 6.1. I would like for them to be able to use my .Net assembly which is basically a proxy to some web services. I have created a test assembly that is nothing more than Hello World, and I'm trying to consume it in a VI. I made it COM visible, and registered it with regasm.exe and created a type library, which I'm not sure I need. I can see it in Visual Studio in the list of COM objects when I open the Add Reference window, so I know it's registered properly. I'm very unfamiliar with VI's. I'm only looking at it because no one I have spoken to in manufacturing knows anything about invoking a COM object in a VI. I'm basically looking for some names of controls or menu options to get the test engineers pointed in the right direction. I did a bunch of web searching on Google and the NI forums, but didn't find much. Alternatively, would it be easier to write a C or C++ DLL that acts as a proxy to my .Net DLL? Or is there a simple way to invoke a web service from a VI? That might obviate the need for a DLL altogether. I'm currently reading through this document from NI for help, but it obviously knows nothing about .Net and might not be able to help me choose the best path forward.

  Read the article

• Cookie blocked/not saved in IFRAME in Internet Explorer

  - by Piskvor

  I have two websites, let's say they're example.com and anotherexample.net. On anotherexample.net/page.html, I have an IFRAME SRC="http://example.com/someform.asp". That IFRAME displays a form for the user to fill out and submit to http://example.com/process.asp. When I open the form ("someform.asp") in its own browser window, all works well. However, when I load someform.asp as an IFRAME in IE 6 or IE 7, the cookies for example.com are not saved. In Firefox this problem doesn't appear. For testing purposes, I've created a similar setup on http://newmoon.wz.cz/test/page.php . example.com uses cookie-based sessions (and there's nothing I can do about that), so without cookies, process.asp won't execute. How do I force IE to save those cookies? Results of sniffing the HTTP traffic: on GET /someform.asp response, there's a valid per-session Set-Cookie header (e.g. Set-Cookie: ASPKSJIUIUGF=JKHJUHVGFYTTYFY), but on POST /process.asp request, there is no Cookie header at all. Edit3: some AJAX+serverside scripting is apparently capable to sidestep the problem, but that looks very much like a bug, plus it opens a whole new set of security holes. I don't want my applications to use a combination of bug+security hole just because it's easy. Edit: the P3P policy was the root cause, full explanation below.

  Read the article

• asp.net on linux/mono broken? weird load then 404/resource error

  - by acidzombie24

  I am testing out my asp.net on mono's VM Ware Image using opensuse From the home page it says Trying out your own code You can test your own applications by connecting with the file manager on this machine to the machine hosting your application, and copying over the directory containing application and its associated files. To test your ASP.NET applications, copy your code to a new directory in /srv/www/htdocs , then visit the following url: http://localhost/directoryname/page.aspx Where directoryname is the directory where you deployed your application, and page.aspx is the initial page for your software, typically Default.aspx. Mirror: http://tortillaflatscafe.com/ I saw my app had errors. After i restarted the VM i can no longer run my app. Instead of getting error messages or anything i get this error instead. Server Error in '/myfoldername' Application The resource cannot be found. Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable. Please review the following URL and make sure that it is spelled correctly. Requested URL: /Default.aspx I tried /default.aspx, using sudo to set permissions to 777 recursively, restarting apache via terminal i could not get this error to go away. How do i fix this?

  Read the article

• python crc32 woes

  - by lazyr

  I'm writing a python program to extract data from the middle of a 6 GB bz2 file. A bzip2 file is made up of independently decryptable blocks of data, so I only need to find a block (they are delimited by magic bits), then create a temporary one-block bzip2 file from it in memory, and finally pass that to the bz2.decompress function. Easy, no? The bzip2 format has a crc32 checksum for the file at the end. No problem, binascii.crc32 to the rescue. But wait. The data to be checksummed does not necessarily end on a byte boundary, and the crc32 function operates on a whole number of bytes. My plan: use the binascii.crc32 function on all but the last byte, and then a function of my own to update the computed crc with the last 1-7 bits. But hours of coding and testing has left me bewildered, and my puzzlement can be boiled down to this question: how come crc32("\x00") is not 0x00000000? Shouldn't it be, according to the wikipedia article? You start with 0b00000000 and pad with 32 0's, then do polynomial division with 0x04C11DB7 until there are no ones left in the first 8 bits, which is immediately. Your last 32 bits is the checksum, and how can that not be all zeroes? I've searched google for answers and looked at the code of several crc32 implementations without finding any clue to why this is so.

  Read the article

< Previous Page | 370 371 372 373 374 375 376 377 378 379 380 381  | Next Page >