Search Results

Search found 30569 results on 1223 pages for 'computer problems'.

Page 374/1223 | < Previous Page | 370 371 372 373 374 375 376 377 378 379 380 381  | Next Page >

• Cisco SA520 to Adtran 1234 no DHCP transfer

  - by Grico

  I am trying to set up a Cisco SA520 to run DHCP on my network. I have a vendor provided switch, the Adtran 1234, and it provides DHCP for our phone systems on VLAN 200. I do not have access to the Adtran, but the vendor gave me a IP on port 1 for WAN and said port 2 should be for the "trust" side should go. I did setup a mini lab where, Adtran 1 went to SA520 WAN port, and SA520 trust 1 went to my laptop. Everything worked fine, I could ping and get internet using the DHCP scope I put on the SA520. I then unplugged my computer from SA520 trust 1 and plugged it into Adtran 2. I plugged my computer into Adtran 23 and I dont get DHCP or even a link light. If I restart my machine, I get a brief link and then it dies once the machine boots. I have tried several ports on the Adtran and none seem to work. Different cables as well. However, when I plug a phone into the Adtran, the phone boot immediately and shows link. Thoughts?

  Read the article

• Time not propagating to machines on Windows domain

  - by rbeier

  We have a two-domain Active Directory forest: ourcompany.com at the root, and prod.ourcompany.com for production servers. Time is propagating properly through the root domain, but servers in the child domain are unable to sync via NTP. So the time on these servers is starting to drift, since they're relying only on the hardware clock. WHen I type "net time" on one of the production servers, I get the following error: Could not locate a time-server. More help is available by typing NET HELPMSG 3912. When I type "w32tm /resync", i get the following: Sending resync command to local computer The computer did not resync because no time data was available. "w32tm /query /source" shows the following: Free-running System Clock We have three domain controllers in the prod.ourcompany.com subdomain (overkill, but the result of a migration - we haven't gotten rid of one of the old ones yet.) To complicate matters, the domain controllers are all virtualized, running on two different physical hosts. But the time on the domain controllers themselves is accurate - the servers that aren't DCs are the ones having problems. Two of the DCs are running Server 2003, including the PDC emulator. The third DC is running Server 2008. (I could move the PDC emulator role to the 2008 machine if that would help.) The non-DC servers are all running Server 2008. All other Active Directory functionality works fine in the production domain - we're only seeing problems with NTP. I can manually sync each machine to the time source (the PDC emulator) by doing the following: net time \\dc1.prod.ourcompany.com /set /y But this is just a one-off, and it doesn't cause automated time syncing to start working. I guess I could create a scheduled task which runs the above command periodically, but I'm hoping there's a better way. Does anyone have any ideas as to why this isn't working, and what we can do to fix it? Thanks for your help, Richard

  Read the article

• Windows Remote Desktop (RDP/MSTSC) fails with Error Code: 5

  - by BryCoBat

  I have 2 Windows XP boxen: A (running XP SP3) and B (running XP SP2). I'm using Remote Desktop to connect from A to B. When I connect, I get the login screen (which is slow to respond to keyboard/mouse input), and after logging in, I get the following: Fatal Error (Error Code: 5) Your Remote Desktop session is about to end. This computer might be low on virtual memory. Close your other programs, and then try connecting to the remote computer again. If the problem continues, contact your network administrator or technical support. I've seen one way to (sometimes) get in by opening a second RDP session to the same box [1], and if I wait long enough sometimes it will go ahead and log in anyway. Is there something broken/missing on the PC I'm trying to remote in to? Edited in reply to djangofan: There's nobody listed under "Lock pages in memory". When the double login trick works, a glance at Task Manager shows plenty of free memory, 800MB available out of 1.5 GB. (Performance tab, Physical memory) For what it's worth, this happens consistently after a reboot. What sort of exact info would be useful? There's very little remaining installed on that machine that's not Windows + Office... [1] found at http://www.fdcservers.net/vbulletin/archive/index.php/t-1580.html

  Read the article

• How to install QEMU on Damn Small Linux?

  - by user2934303

  i'm trying to install QEMU on a Damn Small Linux installation in order to emulate pentium features in a 486 computer. Though DSL was descontinued, it's the only linux that runs reasonably on the 486 processor, most recent kernels doesn't even boot on 486 architecture. I tried Tiny Core Linux, but it doesn't work in 486, so i seem to have no escape here. The most recent image of DSL is from 2008, it uses kernel 2.4.x, and i couldn't find a way to compile QEMU on it. Firstly, it lacks several compile tools needed for compiling it, and, it have several dependency problems. I tried some pre-compiled packages, but the only one that worked was a QEMU 5.2 RPM package (it didn't had dependency problems), and it was way too old, it wasn't capable of running windows yet, it just gave me the option of emulating a code, not a full OS as windows, and it also didn't give me the option to choose which architecture i wanted it to emulate (-cpu option). Can anyone help me with this? Also, if someone can think of some alternative to it, i'd be grateful. Thanks.

  Read the article

• Idle state detection for server

  - by odinmillion

  Windows OS has a service that detects idle state. Details: Task Idle Conditions The computer is considered idle if all the processors and all the disks were idle for more than 90% of the past 15 minutes and if there is no keyboard or mouse input during this period of time. When the Task Scheduler service detects that the computer is idle, the service only waits for user input to mark the end of the idle state. It is very useful for usual PCs that have keyboard amd mouse. We can use standard task scheduler to start some process like defrag when PC in idle state and stop when PC isn't in idle state. But what should we use when we using a standalone server without keyboard and mouse? Server sometimes receives commands by TCP/IP and starts CPU and HDD activity. But sometimes CPU and HDD activity at zero level. I would like to use this periods of time to start defrag or another process. But this started at "idle" state processes should be terminated when another commands will appear. So, standard idle state conditions cant help me because we have not got user input to stop idle state. I need more customizable idle state detector. Automatically started processes shouldn't influence to idle state, but PC should go away from idle state when another process will apperar. What should I use? Maybe exists some advansed task scheduler? Or I should write some useful utility on C#? I hope that it is a standard task and all useful utilities already compiled :)

  Read the article

• Windows 2003 Active Directory Integrated DNS zone not registering non-domain computers

  - by Jeff Willener

  I'm not a networking guy by all means, I'm just a developer who dabbles enough to get into trouble and I'm there. So bear with me... :) At my office I have a Windows 2003 Domain Controller which also services DNS. On the domain I have a handful of computers and other misc. equipment/toys. For the DNS I only created a Forward Lookup Zone for my domain (mydomain.com). I run a lot of VM's so generally I have everything on the domain, however some of those VM's are not and only in a 'Workgroup'. I also have another laptop which belongs to another domain (otherdomain.com) which is here 100% but I use it for other purposes and has to belong to the otherdomain.com. With all that said, I have two questions: I have found any computer not on mydomain.com does not register it's IP address even though 'Register this connections address in DNS' is set to in the 'Advanced TCP/IP Settings' for the nic. Where have I messed this up? On the laptop which is registered on otherdomain.com, when I do a nslookup for a computer on mydomain.com (e.g. nslookup devbox1) it appends otherdomain.com as the suffix (e.g. queries devbox1.otherdomain.com). Same thing occurs if I use the fully qualified name. In the 'Advanced TCP/IP Settings' for that nic, I can 'Append these DNS suffixes' of mydomain.com but I fear that will hose my DNS lookups when I VPN to otherdomain.com. So what is the correct approach to resolve this issue? Do I add both mydomain.com and otherdomain.com in that order?

  Read the article

• Windows 7 Black Screen On Boot, Seperate Bootable VHD Works Fine

  - by David Osborn

  I have a Window 7 x64 install with a bootable VHD (also Windows 7 x64). I was having problems getting my homeserver to do backups (VSS erred) so I ran check disk and used a tool from MS (cleanc2r.exe) to remove an empty Q drive from the VHD that I believe was a result of installing Office 2010 Beta. (All of this was done on the bootable VHD, not the main install.) Now I can't boot into the main install. It gets past the Starting Windows screen and then goes black. I can still boot into the bootable VHD and everything works fine from there. I have tried to boot the main install in Safe Mode/Safe Mode with Networking/and Safe Mode command prompt and it has the same issue. I ran chkdsk /r on the main install and after doing all the work there was a message about correcting some free space that was marked as allocated and also that it was unable to make an entry into the event log. I tried the startup repair utility and it found no problems. I don't see the setting for restore to last know good configuration so I couldn't do that. I don't recall installing anything new to the main install nor having hooked up any new hardware recently.

  Read the article

• Getting around url block for game

  - by Josh T

  So I play a game called Battlefield Play4Free (www.battlefield.play4free.com). Its essentially a giant browser plugin. The admin on my computer used to have the url battlefield.play4free.com/en/playnow.html blocked which only blocked the page that launches the game (i found a way to launch the game without going to that page and the game worked fine). Now it blocks battlefield.play4free.com which thus blocks all subpages. However, I have found that if I change it to an https and go to https://battlefield.play4free.com/en/login.html to login and then https://battlefield.play4free.com/en/playnow.html I can launch the game. However, when the game launches the borders and everything show but the window content is just a giant blockpage (the same one that shows up when I go to battlefield.play4free.com in the browser) and the blocked page is battlefield.play4free.com (main page). Is there any way I can get around this? I need a way to make the game access the server without going through the browser i.e. make the game use a proxy to get the data or somehow get past the besafe block. I was thinking perhaps you could get around it if you could get the game to make a direct request to the server and not through the url/browser, I know this works because I have a torrenting app that even tho torrent sites are blocked in the browser, the app makes a direct request and thus is not blocked. By the way, the program that blocks everything is besafe or besecure something like that. I do have access to an admin account (on the computer not the besafe program) as well as router access and pretty much anything else. Thanks so much!

  Read the article

• SQL Server Express backup/restore error: The Media Family on Device is Incorrectly Formed.

  - by Chris

  Basically, I'm having this issue: http://www.sqlcoffee.com/Troubleshooting047.htm What I'm doing is running a script I found online (http://pastebin.com/3n0ZfybL) to do a full backup, then rar'ing up the file and moving it to my computer. The CRC of the backup file inside the rar is correct on both computers, so there is no problem with data being corrupted when I transfer it. But then I go and try to restore the database on my dev computer here and I get the errors "sql server cannot process this media family" ... "msg 3013". Why is this happening? I'd test out the backup on the server I'm getting it from, but it's a production server. Edit: I was about to say how I wasn't doing anything stupid like trying to restore the database to an earlier version of SQL Server, but apparently I am: From: Microsoft SQL Server 2008 (SP1) - 10.0.2531.0 (Intel X86) Mar 29 2009 10:27:29 Copyright (c) 1988-2008 Microsoft Corporation Express Edition on Windows NT 6.0 (Build 6002: Service Pack 2) To: Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86) Feb 9 2007 22:47:07 Copyright (c) 1988-2005 Microsoft Corporation Express Edition on Windows NT 6.0 (Build 6001: Service Pack 1) Let me get back to this post after I reinstall this.

  Read the article

• why adding router will hide all share folders

  - by user1285419

  I have several computers running winxp installed in my office, they are all connecting to the WAN providing by the building (wall socket) (DHCP, mask 255.255.252.0). I setup a shared folder in my computer so all other computer in the same group could access it. This configuration have been using for long time. Recently, I am trying to setup a router. I have the WAN port of the router go to the wall socket, connect the NIC to the LAN port of the router, setup the router in DHCP mode (192.168.0.100/255.255.255.0 to 192.168.0.110 /255.255.255.0), I turn off all the firewall (windows one and router's builtin one), the NIC has ip set as DHCP. If I ipconfig/all, I see that the NIC was assigned ip 192.168.0.100. I can access the internal, email whatever. However, the shared folder can no longer be accessed by other computers in the same group. I think it is the problem of ip. But what's really weird is if I turn off the DHCP function in the router, ipconfig/all always give 0.0.0.0/255.255.255.255 and I cannot access the internet. I have no idea what's going on. Anyone know how to fix it and allow the shared folder in application of router? Thanks.

  Read the article

• Boot loop that I cannot bypass

  - by lonewaft

  Recently, on a laptop that I've used for a while, I had a strange issue where OS files were corrupted (device manager) and Windows 8 was hung after the login screen, so I reinstalled Windows 7 over the existing Windows 8 installation, and it worked for a couple days. Today, when I tried to use my laptop, it was stuck on a boot loop. Right after the BIOS screen, it would show a flashing underscore, then restart the computer, again and again until I removed the battery. I tried booting to a windows 7 install CD, but the same flashing underscore - reboot sequence happened when I tried. I tried moving the boot priority around (HDD first, CD/DVD first, even USB first) but nothing changed. After about an hour of tinkering with it, I listened to the HDD sounds, and it sounded like the HDD was trying to spin up, but failing (whining noise increasing in frequency that stopped and started in sync with the system restarting). I am planning to replace the HDD, but I'm still confused as to why a faulty HDD would stop the laptop from booting to my install DVD (tried it on a different computer, it booted from that CD fine). Anybody here have any idea why this might be happening?

  Read the article

• How to speed up a HP M9517C

  - by Jen

  I bought a system with 8GB RAM, 1TB HD, Quad-Core AMD Phenom 9550, Nvidia Geforce 9300GE, 64-bit Windows Vista Machine. Bought it primarily because it was cheap and came with 25.5 inch screen. Problem: It's slow - if you can believe it. My Dell laptop 1525 is faster and more stable! I tried installing and dual-booting Linux Mint and ran into video and audio troubles. I need fast and stable and I'm going for awesome. Anyone have some suggestions on making this thing smoking hot? Vista is fine, but slows over time - suspect virus/spyware/etc.. But I need to use Photoshop, Fireworks, Dreamweaver, Illustrator. I've tried the alternatives and I just don't like them. When you've got deadlines looming you want to work with what you know. Also use Skype (and I had audio problems with it in Linux), gotomeeting, gotowebinar. Don't need MS Office. Tried VMWare, Virtualbox and again - I keep getting audio/video problems. I'd love someone's input on THEIR setup and how they got there. I'm sure I need to upgrade my video card, but what should I go to?

  Read the article

• Centos: installing SVN tells I don't have perl 1.17. I have installed 5.8

  - by Emerson

  I'm trying to install SVN on a CentOS virtual machine. I used the command that the CentOS wiki tells: http://wiki.centos.org/HowTos/Subversion yum install mod_dav_svn subversion It gives me a few errors: --> Finished Dependency Resolution mod_dav_svn-1.4.2-4.el5_3.1.i386 from base has depsolving problems --> Missing Dependency: httpd-mmn = 20051115 is needed by package mod_dav_svn-1.4.2-4.el5_3.1.i386 (base) subversion-1.4.2-4.el5_3.1.i386 from base has depsolving problems --> Missing Dependency: perl(URI) >= 1.17 is needed by package subversion-1.4.2-4.el5_3.1.i386 (base) Error: Missing Dependency: perl(URI) >= 1.17 is needed by package subversion-1.4.2-4.el5_3.1.i386 (base) Error: Missing Dependency: httpd-mmn = 20051115 is needed by package mod_dav_svn-1.4.2-4.el5_3.1.i386 (base) The thing is that I have Perl 5.8 installed: root@server [~]# rpm -q perl perl-5.8.8-32.el5_5.2 I also don't know why it tells httpd-mmn isn't installed. I have apache installed for sure. From what I read here, it seems I would need to recompile apache. www.sitepoint.com /forums/showthread.php?t=485683 Any ideas? Update: I also tried to install subversion via WHM (11.28.35) and it gives me the same error. By the way, WHM it says: CENTOS 5.5 i686 virtuozzo on server

  Read the article

• Where do I connect the HDD LED wires on my RAID adapter?

  - by Giffyguy

  I'm using a Promise FastTrak TX8660 with RAID 5. The manual (and Google) just doesn't seem to explain how exactly to connect a standard two-pin HDD LED wire to the eight available pins on the card. The Manual just says - To connect your LED, follow the following diagram: The card itself resembles the diagram: But it doesn't make any sense to me. All I have is a two-pin connecter for HDD LED on the front of my computer case. I don't need anything fancy like the fault LED or seperate indicators for each drive. I just want to be able to see when my RAID 5 array is working, that's all. I don't know what the "R" and "G" stand for, but my HDD LED wires are red and white. I tried connecting the red wire to the "R" pin and the white wire to the "G" pin, but that just makes the LED on the front of my case light up indefinitely, even when the computer is idle. Which pins am I suppose to connect the HDD LED header to for basic activity indication?

  Read the article

• Using multiple computers effectively

  - by Benjamin Oakes

  I have some extra (old) Macs and PCs around the house and a MacBook that's sometimes overworked. I'm looking for tips on using multiple computers effectively. Basically, I'd like to add to the following list. Here's what I'm using so far: Teleport: lets you use a single mouse and keyboard to control several Macs, like Synergy Built-in file sharing: lets me run programs on another Mac, but only maintain one copy of the data Bazaar: distributed version control Mail.app, Thunderbird, etc.: IMAP for my mail accounts TuneConnect: control iTunes on another Mac with a nice interface, using the library on my MacBook (if I choose it by pressing option at startup) over file sharing OmniFocus: syncs across computers pretty seamlessly Web browsing across computers VNC/Remote Desktop Running X-windows programs using ssh -Y hostname for headless operation (but they die when I sleep the connecting computer -- something like GNU screen would be ideal) Plain-old ssh with GNU screen Really, a better idea of what I do might be necessary. Generally though, I'd like to distribute tasks across more than one computer when possible, but not have much overhead in doing so. The perfect solution? An Xgrid-like program that pushes processing across multiple computers automatically and seamlessly (although that seems unlikely). Here's what I have, in case it makes a difference: MacBook (Dual 2.16 GHz, OS X 10.6.3) eMac (1.25 GHz, OS X 10.4.11, soon to be 10.5) Dell Dimension (800 MHz, some version of Ubuntu) -- no dedicated monitor PowerMac G3 (400 MHz, OS X 10.4.11) -- no dedicated monitor iMac G3 DV (400 MHz, OS X 10.4.11) -- currently in the kitchen for recipes, email, web browsing, music, movies (DVDs), etc. (Total, they cost me around $650, mostly for the MacBook. Freecycle is wonderful, just in case you haven't heard of it.) I'm really only using the MacBook and eMac at this point, but I'd like to push more onto it and possibly the PowerMac and Dell.

  Read the article

• Acer Aspire One (mini) mfgd 9/03 locks up also when plugged in

  - by LAURIE ANN

  My problem is almost the same as the Toshiba user (Toshiba A205-5804 freezes when plugged in): Well I have a Toshiba A205-5804 and the problem is that the screen freezes anytime I plug the pc into the external power supply, not as most of the computers having the same issue, my computer DOES freeze in safe mode, and I really can't bear this problem for much longer... It's not an overheat problem, the computer is not getting hot or anything related, I've tried already to change the AC adapter, to boot only with AC and no battery, and also all of these suggestions: The only difference in my case is: I can be using the battery and when it runs down, I can just close the lid and the system goes into hibernation mode. I then plug it in and let it charge. When I think it's finally charged, I can UNPLUG it, open the lid and all is running fine on the battery again. Note: the system was NOT shut down and it still runs as long as I remove the power plug before opening the lid. I have ALL the same issues as the other Toshiba user, also. I was a tech for 9 yrs in my own business and this one has not only stumped me, but anyone I have asked has never heard of this problem. Every repair center wants to charge me for diagnosis, even is they cannot fix it. I would really like to run this system along side of my new Acer Aspire 17" laptop as I need it to finish my grad school work. Any ideas would be GREATLY appreciated. Thanx, Laurie Ann

  Read the article

• Centos yum install git-sv

  - by bob

  Running yum install on Centos yum install git-svn is producing the following errors: Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * addons: mirror.eshk.hk * base: centos.01link.hk * epel: mirror.bjtu.edu.cn * extras: mirror.eshk.hk * rpmforge: apt.sw.be * updates: mirror.vpshosting.com.hk Setting up Install Process Resolving Dependencies --> Running transaction check ---> Package git-svn.i386 0:1.7.3.4-1.el5.rf set to be updated --> Processing Dependency: perl(SVN::Core) for package: git-svn --> Processing Dependency: perl(Error) for package: git-svn --> Processing Dependency: perl(Term::ReadKey) for package: git-svn --> Running transaction check ---> Package perl-Error.noarch 1:0.17010-1.el5 set to be updated ---> Package perl-TermReadKey.i386 0:2.30-4.el5 set to be updated ---> Package subversion-perl.i386 0:1.4.2-4.el5_3.1 set to be updated --> Processing Dependency: subversion = 1.4.2-4.el5_3.1 for package: subversion-perl --> Finished Dependency Resolution subversion-perl-1.4.2-4.el5_3.1.i386 from base has depsolving problems --> Missing Dependency: subversion = 1.4.2-4.el5_3.1 is needed by package subversion-perl-1.4.2-4.el5_3.1.i386 (base) Error: Missing Dependency: subversion = 1.4.2-4.el5_3.1 is needed by package subversion-perl-1.4.2-4.el5_3.1.i386 (base) You could try using --skip-broken to work around the problem You could try running: package-cleanup --problems package-cleanup --dupes rpm -Va --nofiles --nodigest The program package-cleanup is found in the yum-utils package.

  Read the article

• Desktop.ini Issues/Confusion

  - by EpicDavi

  BACKSTORY: I was out of town for a while and I forgot to turn my computer off. When I came back I saw that a desktop.ini file was on my desktop (using Windows 7). I thought that was odd because I knew it was a system file and it usually didn't show up due to the fact that I had disable the feature to show system files. Also it wasn't translucent like the other system files. I went to my control panel and saw that the "Hide protected operating system files" was indeed enabled. This puzzled me so I disabled the setting and another one was on my desktop like it usually is hidden. So now I have to desktop.ini files on my desktop: one hidden and one not hidden. I am doing an antivirus check to see if anything was going on and I will give an update soon. I am pretty sure these files are harmless and could be deleted but I would rather get another person's opinion on the subject. Thanks! UPDATE: I did an anti-virus scan and it seems I have no problems. It is odd because the file seems to maintain system file properties such as not being able to be edited and other things. Also I have tried restarting my computer and it is still not hidden. So the question remains: What should I do with the file and what caused it?

  Read the article

• Parental Controls in Ubuntu - per user

  - by Hamish Downer

  I would like to set up parental controls on Ubuntu for a friend of mine. I want it so that the child user has the controls set, but the parent user is not restricted. To be clear, they are sharing one computer, so a router based solution won't help. And I would like a set of step by step instructions to do this. Just one way of doing it. I'm an experienced Ubuntu user, happy at the command line. I've spent quite some time googling for this along the way. I hope that the GChildCare project will eventually make this easy, but it is not ready yet. In the meantime, the WebContentControl GUI provides a way of managing parental controls, but apply them to every user on the computer (easy WebContentContol install instructions and detailed instructions, discussion and related links on ubuntuforums). The ubuntuforums post has a FAQ that states that user-specific configuration is not possible with WebContentControl, and then provides 3 links he used to help him do it. But they are far from step by step instructions. There is this thread which is notes along the way and linking to this article about squid and dansguardian. And then to these two dansguardian articles which are somewhat in depth ... So does anyone know of an existing guide to how to set up parental controls on ubuntu with some users not affected? If no one has come up with an answer after a little bit, I'll set up a community wiki answer so we can come up with a guide.

  Read the article

• mpirun -np N, what if N is larger than my core number?

  - by Daniel

  Say I have a 4-core workstation, what would linux (Ubuntu) do if I execute mpirun -np 9 XXX Q1. Will 9 run immediately together, or they will run 4 after 4? Q2. I suppose that using 9 is not good, because the remainder 1, it will make the computer confused, (I don't know is it going to be confused at all, or the "head" of the computer will decide which core among the 4 cores will be used?) Or it will be randomly picked. Who decide which one core to call? Q3. If I feel my cpu is not bad and my ram is okay and large enough, and my case is not very big. Is it a good idea in order to fully use my cpu and ram, that I do mpirun -np 8 XXX, or even mpirun -np 12 XXX. Q4. Who decides all of these effciency optimization, Ubuntu, or linux, or motherboard or cpu? Your enlightenment would be really appreciated.

  Read the article

• NTBackup Error: C: is not a valid drive

  - by Chris

  I'm trying to use NtBackup to back up the C: Drive on a Microsoft Windows Small Business Server 2003 machine and get the following error in the log file: Backup Status Operation: Backup Active backup destination: 4mm DDS Media name: "Media created 04/02/2011 at 21:56" Error: The device reported an error on a request to read data from media. Error reported: Invalid command. There may be a hardware or media problem. Please check the system event log for relevant failures. Error: C: is not a valid drive, or you do not have access. The operation did not successfully complete. I'm using a brand new SATA Quantum Dat-72 drive with a brand new tape (tried a couple of tapes). I carry out the following: Open NTBackup Select Backup Tab Tick the box next to C: Ensure Destination is 4mm DDS Media is set to New Press Start Backup Choose Replace the data on the media and press Start Backup NTBackup tries to mount the media Error Message shows: The device reported an error on a request to read data from media. Error reported: INvalid command. There may be a hardware or media problem. Please check the system event log for relevant failures. On checking the log I find the following: Event Type: Information Event Source: NTBackup Event Category: None Event ID: 8018 Date: 04/02/2011 Time: 22:02:02 User: N/A Computer: SERVER Description: Begin Operation For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. and then; Event Type: Information Event Source: NTBackup Event Category: None Event ID: 8019 Date: 04/02/2011 Time: 22:02:59 User: N/A Computer: SERVER Description: End Operation: The operation was successfully completed. Consult the backup report for more details. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Read the article

• Does water damage a fiber optic / cat5 cable

  - by chris

  One of the buildings I support recently had an adventure with a broken fire sprinkler. Lots of water everywhere. One of the "drains" the water used was the vertical risers between network closets. The cable plant in this building has bundles of cat5e as well as conduit with bundles of multimode fiber optic cables. The fiber is standard multi strand plenum rated stuff that terminates in boxes that have the patches to the switches. As far as I can tell, no water got near the ends of the cables (fiber or copper) but the conduit was saturated, and is likely still saturated because there isn't any air flow to dry the cables out. My gut reaction is that while it didn't do the cables any favors, it likely also isn't going to cause any problems. A little more reading / googling around leads me to believe that the water may cause problems down the road. Some pretty pictures so everyone knows what I'm talking about: Fiber conduit: Vertical riser, going down: Vertical riser, going up: Does anyone have any experience with this sort of damage and how to deal with it? Should we just ask the insurance adjuster to add "pull new structured cable" to the list of things to be replaced? And, if the opinion is "replace it because it'll start failing randomly over time" please include links that describe the specific failure modes, so I've got some ammo to use with the adjuster.

  Read the article

• Create a special folder within an outlook PST file

  - by Tony Dallimore

  Original question I have two problems caused by missing special folders. I added a second email address for which Outlook created a new PST file with an Inbox to which emails are successfully imported. But there is no Deleted Items folder. If I attempt to delete an unwanted email it is struck out. If move an email to a different PST file it is copied. I created a new PST file using Data File Management. This PST file has no Drafts folder. This is not important but I fail to see why I cannot have Drafts folder if I want. Any suggestions for solving these problems, particularly the first, gratefully received. Update Thanks to Ramhound and Dave Rook for their helpful responses to my original question. I assumed the problem of not have a Drafts folder in an Archive PST file and not having a Deleted Items folder associated with an Inbox were part of the same problem or I would not have mentioned the Drafts folder issue since I have an easy work-around. Perhaps my question should have been: How to I load emails from an IMAP account and be able to delete the spam?

  Read the article

• How can I disable the CTRL-ALT-DEL key combination completely on XP/Vista/7?

  - by Travesty3

  I have been googling extensively to figure this out, and nobody seems to be able to give a direct answer. Let me start by saying that I'm NOT talking about requiring CTRL-ALT-DEL to enter logon information. I'm working on a golf simulator program which is used at golf centers. I need the ability to completely disable the CTRL-ALT-DEL key sequence so that the golf center customers can't get out of the program and access the computer at all. I realize there are other key combinations that need to be handled as well, we already have this entire feature working in XP, but we're going to be switching to Windows 7 soon, and CTRL-ALT-DEL is the only one that doesn't seem to work in Win7. I'd really like an all-around solution if at all possible. This same program may also be installed on a client's personal computer for an in-home golf simulator, but the computers that really need this feature (golf center computers) are provided to the golf center by us, so would the best option be to write a new shell? I don't know anything about that at all, other than others that suggest writing a new shell for kiosk mode. I'd really like a simpler option, like modifying the registry in some way. I have heard that you can remove some buttons from the menu screen that pops up, but unless I can remove pretty much all of them (including the shutdown/restart button in the bottom-right corner), this won't be enough of a solution for me. Thanks for taking the time to read this and thanks again for any help you could provide! -Travis

  Read the article

• How to tackle dell support system? [closed]

  - by Nishant Kumar

  We have purchased a Dell Optiplex 9010 SSFV for our organization's work. Since the first installation two of the USB keyboard keys were not working properly. I had to press those keys two times simultaneously, on first time keys did not work and for for second time it printed two characters (as it were buffering first character.) Two keys that were not working properly: Hexangrave (Below the ESC key: `) Double Quotes (Left the enter key ") We registered our complaint with DELL and they suggested (with some hard to understand and weird ENGLISH accent) some test and tricks, such as switching to different ports, checking keyboard on different PC, and it worked well with diff. PC(with Windows 7 Home Premium installed). It was clear that it is an OS fault, hence they suggested to re-install OS. Problem began here, we have a project on the run and currently a video editing project setup on our system, so can't re-install system in hurry and also DELL persons were not providing any other solution such as updating keyboard driver, etc. Arguments I am a Software Engg. and don't think it is a feasible solution to re-install entire system for simple problems. This prob is coming since the fresh system installation, so I don't think it will solve the problem. Finally, I had to find solution myself and got it here, now I want to show my disappointment to dell persons or at least tell them that they should improve there support system to not advice to re-install entire system for that simple problems. Notes We have purchased 5 years NEXT business day support from DELL for around 8000 INR (Not for that kind of solutions from DELL). So can anyone tell me how to tackle dell support system officially, so that they will pay more attention in near future. Thanks

  Read the article

< Previous Page | 370 371 372 373 374 375 376 377 378 379 380 381  | Next Page >