Search Results

Search found 26263 results on 1051 pages for 'linux guest'.

Page 374/1051 | < Previous Page | 370 371 372 373 374 375 376 377 378 379 380 381  | Next Page >

• Problems with connecting to ASM instance

  - by Rodnower

  I have Oracle11 with RAC installed on RedHat 5. I have two servers with two instances one on each one. In each server I succeed connect to appropriate instance of database but not to instance of ASM. I connect with user oracle11 and type: export ORACLE_SID=+ASM1 sqlplus "/ as sysdba" It connects but write: Connected to an idle instance and when I try to access to parameters or views I have errors. For know that +ASM1 is the SID I type: ps aux | grep pmon and get: asm_pmon_+ASM1 I tried also with +ASM but it was also unsuccessfully. What is wrong here?

  Read the article

• "Possible SYN flooding" in log despite low number of SYN_RECV connections

  - by al4

  Recently we had an apache server which was responding very slowly due to SYN flooding. The workaround for this was to enable tcp_syncookies (net.ipv4.tcp_syncookies=1 in /etc/sysctl.conf). I posted a question about this here if you want more background. After enabling syncookies we started seeing the following message in /var/log/messages approximately every 60 seconds: [84440.731929] possible SYN flooding on port 80. Sending cookies. Vinko Vrsalovic informed me that this means the syn backlog is getting full, so I raised tcp_max_syn_backlog to 4096. At some point I also lowered tcp_synack_retries to 3 (down from the default of 5) by issuing sysctl -w net.ipv4.tcp_synack_retries=3. After doing this, the frequency seemed to drop, with the interval of the messages varying between roughly 60 and 180 seconds. Next I issued sysctl -w net.ipv4.tcp_max_syn_backlog=65536, but am still getting the message in the log. Throughout all this I've been watching the number of connections in SYN_RECV state (by running watch --interval=5 'netstat -tuna |grep "SYN_RECV"|wc -l'), and it never goes higher than about 240, much much lower than the size of the backlog. Yet I have a Red Hat server which hovers around 512 (limit on this server is the default of 1024). Are there any other tcp settings which would limit the size of the backlog or am I barking up the wrong tree? Should the number of SYN_RECV connections in netstat -tuna correlate to the size of the backlog? Update As best I can tell I'm dealing with legitimate connections here, netstat -tuna|wc -l hovers around 5000. I've been researching this today and found this post from a last.fm employee, which has been rather useful. I've also discovered that the tcp_max_syn_backlog has no effect when syncookies are enabled (as per this link) So as a next step I set the following in sysctl.conf: net.ipv4.tcp_syn_retries = 3 # default=5 net.ipv4.tcp_synack_retries = 3 # default=5 net.ipv4.tcp_max_syn_backlog = 65536 # default=1024 net.core.wmem_max = 8388608 # default=124928 net.core.rmem_max = 8388608 # default=131071 net.core.somaxconn = 512 # default = 128 net.core.optmem_max = 81920 # default = 20480 I then setup my response time test, ran sysctl -p and disabled syncookies by sysctl -w net.ipv4.tcp_syncookies=0. After doing this the number of connections in the SYN_RECV state still remained around 220-250, but connections were starting to delay again. Once I noticed these delays I re-enabled syncookies and the delays stopped. I believe what I was seeing was still an improvement from the initial state, however some requests were still delayed which is much worse than having syncookies enabled. So it looks like I'm stuck with them enabled until we can get some more servers online to cope with the load. Even then, I'm not sure I see a valid reason to disable them again as they're only sent (apparently) when the server's buffers get full. But the syn backlog doesn't appear to be full with only ~250 connections in the SYN_RECV state! Is it possible that the SYN flooding message is a red herring and it's something other than the syn_backlog that's filling up? If anyone has any other tuning options I haven't tried yet I'd be more than happy to try them out, but I'm starting to wonder if the syn_backlog setting isn't being applied properly for some reason.

  Read the article

• Nagios Woudn't Start, now won't Stop!

  - by Bart B

  I ran an update on a CentOS server running Nagios, after the update, Nagios failed to start. The error in the logs was: Failed to obtain lock on file /var/run/nagios.pid: Permission denied So, I checked and there was no pid file for Nagios in /var/run. I created one and gave it the following permissions: -rwxr--r-- 1 nagios nagios 6 May 31 11:58 nagios.pid Nagios then started and seems to be running normally. The only problem is, it refuses to stop now, so I can't re-start it to add new servers and services to be monitored! When I issue the command "service nagios stop", I get [FAILED], but nothing at all gets outputted to the log, and the service remains up. Any ideas on how I can get the service to stop now? I'm running the RPM version which was installed via yum from the RPMForge repositories. The server is CenotOS 5.5.

  Read the article

• How to view bad blocks on mounted ext3 filesystem?

  - by Basilevs

  I've ran fsck -c on the (unmounted) partition in question a while ago. The process was unattended and results were not stored anywhere (except badblock inode). Now I'd like to get badblock information to know if there are any problems with the harddrive. Unfortunately, partition is used in the production system and can't be unmounted. I see two ways to get what I want: Run badblocks in read-only mode. This will probably take a lot of time and cause unnecessary bruden on the system. Somehow extract information about badblocks from the filesystem iteself. How can I view known badblocks registered in mounted filesystem?

  Read the article

• Redhat doesn't set my desired hostname on reboot

  - by tomdee

  I have a redhat (EL5) server that I need to change the hostname on. I'm trying to put it back into a known state to help with server provisioning activities. As part of changing the hostname, I'm updating /etc/sysconfig/network and /etc/hosts. I also have an explicit call to hostname. My desired state is that the server thinks its hostname is "localhost". And a call to "hostname" returns "localhost". The problem I'm having is that when I reboot, the hostname is reverted to "localhost.companyname.com" which is not what I want. How do I ensure that the hostname is set up as just "localhost" when I reboot? My /etc/sysconfig/network file contains: NETWORKING=yes HOSTNAME=localhost GATEWAY=123.123.123.123 #I do have a proper IP address here My /etc/hosts file contains: 127.0.0.1 localhost.localdomain localhost 172.21.1.1 localhost.companyname.com localhost

  Read the article

• Adjust screen brightness automaticly at night.

  - by Nifle

  Can anyone recommend an application that will automatically dim my monitors when it gets dark at night?

  Read the article

• downgrade the system

  - by deddihp

  hello, actually i have some business to downgrade the kernel. I downgrade from kernel 2.6.31-14 (ubuntu 9.10) to 2.6.26.8. And then i got the following error in my boot process : warning: unable to find a suitable fs in /proc/mounts, is it mounted ? use --subdomainfs to override what is that mean anyway ? thanks.

  Read the article

• send outgoing email via postfix from mail client

  - by Ey Jay

  I have installed postfix on my ubuntu that is hosted on digitalocean. What I want to do is. With my smtp server setup, I want to use it to send mail from my email client. I don't need to receive, I just need to send. I can telnet example.com 25 successfully, I received the email in my inbox, but when I tried using in a email client. smtp: example.com:25 user: smtp1user password: smtp1userpassword I get an error that says "Server doesn't respond. Try changing the port." I dont know how to proceed.

  Read the article

• Ubuntu Natty 11.04, Turning the wireless switch off; switches it off permanently!

  - by ZiGi

  i'm using an hp pavilion dv2000 i turned the wifi switch off by mistake, the LED turned orange and the wifi got disconnected. and now when i turn the switch on, it remains orange and the wifi still isn't functional. this happened before; i found a fix that worked searching google. it was done via terminal commands and i didn't have to download anything but i can't find the solution anymore! wlan0 shows up when i use: :~$iwconfig #BLA BLA BLA #... wlan0 IEEE 802.11abg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off more results: :~$ sudo ifconfig wlan0 up SIOCSIFFLAGS: Operation not possible due to RF-kill :~$ rfkill list all 1: phy0: WirelessLAN Soft blocked: yes Hard blocked: yes :~$ sudo rfkill unblock all :~$ rfkill list all 1: phy0: WirelessLAN Soft blocked: no Hard blocked: yes :~$ sudo ifconfig wlan0 up SIOCSIFFLAGS: Operation not possible due to RF-kill it's still hard blocked! even though the switch is turned on; gives the same result eitherways a direction to a page with a working solution is a much appreciated answer!

  Read the article

• How to prevent unison syncronize file when file process uploading

  - by user134600

  I use CentOS 5.8 Final. My situation is I running unison with cron where script below : */1 * * * * /usr/bin/unison /dev/null 2&1 and default profile like below : root = /var/www root = ssh://web02.example.com//var/www auto=true batch=true confirmbigdel=true fastcheck=true group=true owner=true prefer=newer silent=true times=true So in every minutes will syncronized www folder . My problem are : I upload file with size bigger than 10 MB to www from client with user1 permission where www folder is user1 owner. file in processing uploading then unison running in that minute and suddenly file upload owner changed to root:root When I editing file in www folder then I save when unison running, file owner changed to root:root where should be user1:user1 Is there anyone know about this problem?

  Read the article

• Did something just get borked with glibc/perl/irssi?

  - by Wayne Werner

  I was using irssi about 30 minutes ago now on Ubuntu server 12.04. Everything was perfectly fine and then all of the sudden something happened (my guess is a power failure). The box was restarted. When I logged back in and ran irssi, I got the following: *** glibc detected *** irssi: double free or corruption (out): 0x0000000002085a40 *** ======= Backtrace: ========= /lib/x86_64-linux-gnu/libc.so.6(+0x7e626)[0x7ffc01d87626] irssi(config_node_set_str+0x98)[0x491768] irssi[0x491f12] irssi[0x491e61] irssi(config_parse+0x52)[0x492112] irssi[0x48ab81] irssi(settings_init+0xd1)[0x48bf81] irssi(core_init+0x79)[0x47a849] irssi(main+0xd8)[0x4167e8] /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xed)[0x7ffc01d2a76d] irssi[0x416b41] ======= Memory map: ======== 00400000-004d0000 r-xp 00000000 08:01 1319015 /usr/bin/irssi 006cf000-006d0000 r--p 000cf000 08:01 1319015 /usr/bin/irssi 006d0000-006dc000 rw-p 000d0000 08:01 1319015 /usr/bin/irssi 006dc000-006dd000 rw-p 00000000 00:00 0 02078000-02099000 rw-p 00000000 00:00 0 [heap] 7ffc0025b000-7ffc00270000 r-xp 00000000 08:01 655404 /lib/x86_64-linux-gnu/libgcc_s.so.1 7ffc00270000-7ffc0046f000 ---p 00015000 08:01 655404 /lib/x86_64-linux-gnu/libgcc_s.so.1 7ffc0046f000-7ffc00470000 r--p 00014000 08:01 655404 /lib/x86_64-linux-gnu/libgcc_s.so.1 7ffc00470000-7ffc00471000 rw-p 00015000 08:01 655404 /lib/x86_64-linux-gnu/libgcc_s.so.1 7ffc00471000-7ffc0073a000 r--p 00000000 08:01 1320172 /usr/lib/locale/locale-archive 7ffc0073a000-7ffc00746000 r-xp 00000000 08:01 655391 /lib/x86_64-linux-gnu/libnss_files-2.15.so 7ffc00746000-7ffc00945000 ---p 0000c000 08:01 655391 /lib/x86_64-linux-gnu/libnss_files-2.15.so 7ffc00945000-7ffc00946000 r--p 0000b000 08:01 655391 /lib/x86_64-linux-gnu/libnss_files-2.15.so 7ffc00946000-7ffc00947000 rw-p 0000c000 08:01 655391 /lib/x86_64-linux-gnu/libnss_files-2.15.so 7ffc00947000-7ffc00951000 r-xp 00000000 08:01 655392 /lib/x86_64-linux-gnu/libnss_nis-2.15.so 7ffc00951000-7ffc00b51000 ---p 0000a000 08:01 655392 /lib/x86_64-linux-gnu/libnss_nis-2.15.so Followed by many more lines. Is there anything I can do to fix this?

  Read the article

• Http to https behavior for visits from Internet Explorer client

  - by Emile

  My website has an SSL cert (example url: https://subdomain.example.com). Under Apache it's set up for both port 80 and port 443. So under the following configuration, anyone who goes to http://subdomain.example.com is sent to https://subdomain.example.com . But for visits from Internet Explorer, the redirect doesn't happen. Instead, http visits get a "Internet Explorer cannot display the web page." with a list of client-side solutions to try. Any ideas on how to fix the config so IE visits have the same behavior as the other browsers (that is, send http to https automatically)? NameVirtualHost *:443 <VirtualHost *:80> DocumentRoot /var/www/somewebroot ServerName subdomain.example.com </VirtualHost> <VirtualHost *:443> DocumentRoot /var/www/somewebroot ServerName subdomain.example.com # SSL CERTS HERE </VirtualHost> *Tested IE8, IE9 beta

  Read the article

• OpenOffice.org 3 waits 25 seconds before opening

  - by Joey Adams

  I'm on Fedora 14, and OpenOffice 3.3.0 takes a long time to open (about 30 seconds, sometimes less). It isn't a CPU or disk performance issue, it's just simply a very long delay before the program opens. It appears to be a frivolous network connection timing out. According to Wireshark, it tries to look up: dulcimer.(none) which fails, after which it tries to look up: dulcimer.(none).mylitestream.com (dulcimer is my hostname, and LiteStream is my ISP) Is there a way to work around this bug in OpenOffice?

  Read the article

• Remove server hangs, gets stuck. How to debug?

  - by bibstha

  I have an vps running on VmWare ESX with Ubuntu 8.04 LTS. It has been running smoothly for the past 3 months, however recently we've notices two strange bugs. a. The server hangs, today was second time. The nature of the hang is very strange. I can ping to the server server, it sends back response fine. However all other services like sshd, apache, mysql etc do not respond at all. When working, telnet servername 22 Escape character is '^]'. SSH-2.0-OpenSSH_5.X Debian-5ubuntu1 And other web services would run fine. When its hung, I can make tcp connections to 22 as well as 80 but receive no response at all. telnet servername 22 Escape character is '^]'. How can I debug this problem? Is there any daemons I can run that will periodically log status? Please tell me as to how to proceed with it. b. The another strange problem is that, of lately I am unable to transfer files larger than around 100KB, smaller files of around 1-2 KB works file. scp anotherserver:filename . or wget http://www.example.com/file would get stuck. There is still around 6GB of space remaining, so I don't think that is an issue. Any pointers where I should look into?

  Read the article

• Ubuntu: Multiple NICs, one used only for Wake-On-LAN

  - by jcwx86

  This is similar to some other questions, but I have a specific need which is not covered in the other questions. I have an Ubuntu server (11.10) with two NICs. One is built into the motherboard and the other is a PCI express card. I want to have my server connected to the internet via my NAT router and also have it able to wake from suspend using a Magic Packet (henceforth referred to as Wake-On-LAN, WOL). I can't do this with just one of the NICs because each has an issue - the built-in NIC will crash the system if it is placed under heavy load (typically downloading data), whilst the PCI express NIC will crash the system if it is used for WOL. I have spent some time investigating these individual problems, to no avail. My plan is thus: use the built-in NIC solely for WOL, and use the PCI express card for all other network communication except WOL. Since I send the WOL Magic Packet to a specific MAC address, there is no danger of hitting the wrong NIC, but there is a danger of using the built-in NIC for general network access, overloading it and crashing the system. Both NICs are wired to the same LAN with address space 192.168.0.0/24. The built-in ethernet card is set to have interface name eth1 and the PCI express card is eth0 in Ubuntu's udev persistent rules (so they stay the same upon reboot). I have been trying to set this up with the /etc/network/interfaces file. Here is where I am currently: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.0.3 netmask 255.255.255.0 network 192.168.0.0 broadcast 192.168.0.255 gateway 192.168.0.1 auto eth1 iface eth1 inet static address 192.168.0.254 netmask 255.255.255.0 I think by not specifying a gateway for eth1, I prevent it being used for outgoing requests. I don't mind if it can be reached on 192.168.0.254 on the LAN, i.e. via SSH -- it's IP is irrelevant to WOL, which is based on MAC addresses -- I just don't want it to be used to access internet resources. My kernel routing table (from route -n) is Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 100 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 My question is this: Is this sufficient for what I want to achieve? My research has thrown up the idea of using static routing to specify that eth1 should only be used for WOL on the local network, but I'm not sure this is necessary. I have been monitoring the activity of the interfaces using iptraf and it seems like eth0 takes the vast majority of the packets, though I am not sure that this will be consistent based on my configuration. Given that if I mess up the configuration, my system will likely crash, it is important to me to have this set up correctly!

  Read the article

• Pgpool-regclass gives error when installling

  - by user119720

  I have a problem when installing the pgpool-regclass. When I'm running 'Make',it shows me this kind of error : p,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic -I/usr/include/et -Wall -Wmissing-prototypes -Wpointer-arith -Wdeclaration-after-statement -Wendif-labels -Wmissing-format-attribute -Wformat-security -fno-strict-aliasing -fwrapv -fpic -I. -I. -I/usr/pgsql-9.2/include/server -I/usr/pgsql-9.2/include/internal -I/usr/include/et -D_GNU_SOURCE -I/usr/include/libxml2 -I/usr/include -c -o pgpool-regclass.o pgpool-regclass.c pgpool-regclass.c:99:37: error: macro "RangeVarGetRelid" requires 3 arguments, but only 2 given pgpool-regclass.c: In function âpgpool_regclassâ: pgpool-regclass.c:99: error: âRangeVarGetRelidâ undeclared (first use in this function) pgpool-regclass.c:99: error: (Each undeclared identifier is reported only once pgpool-regclass.c:99: error: for each function it appears in.) make: *** [pgpool-regclass.o] Error 1 Can anyone help me to sort this things out?I really appreciate it. Thanks.

  Read the article

• Where is the encfs volume key stored?

  - by Waldorf

  I am trying to use encfs in reverse mode. I understand that the passphase is used to encrypt a key which is then stored encrypted into the encfs6.xml file. What I do not understand is the following. Create en encrypted virtual fs of a folder by using passphrase A unmount this folder. Delete all contents including the encfs6.xml file If you then try to do the same with another passphrse I would expect that a new encfs6.xml would be created. However I get the following error message: "Error decoding volume key, password incorrect" So I wonder, what volume key is incorrect, I thought it was in the encfs6.xml file ?

  Read the article

• Is there a way to do something like LVM over NFS?

  - by warren

  I realize that since NFS is not block-level, LVM can't be used directly. However: is there a way to combine multiple NFS exports (from, say, 3 servers) into one mount point on a different server? Specifically, I'd like to be able to do this on RHEL 4 (or 5, and re-export the combined mount to my RHEL 4 server). expansion The reason I pegged lvm is that I want a bunch of exported mounts (servera:/mnt/export, serverb:/mnt/export, serverc:/mnt/export, etc) to all mount at /mnt/space so that my /mnt/space on this server (serverx) as one large filesystem. Yes, I know that re-exporting is generally a Bad Thing™ but thought it might work, if there was a way to accomplish this on a newer release as opposed to an older one From reading the unionfs docs, it appears that I can't use it over a remote connection - have I misread it? More accurately, since Union FS merges the contents of multiple branches, but makes them appear as one, it doesn't seem to go in reverse: I'm trying to mount a bunch of NFS points in a merged fashion, then write to them - not caring where data goes, a la LVM .

  Read the article

• Hi , is there any wiki that supports ACL , ADI and API ? [closed]

  - by goutham

  Possible Duplicate: Which wiki satisfies ACL ADI and API ? Hi , is there any wiki that supports ACL , ADI and API ? and my requirement is we need a wiki that does three things 1. Uses ACL (Access Control lists - who can access what pages) 2. Needs AD (active directory integration) 3. Is scriptable via an API (meaning I can create a wiki page through an API in a program instead of logging in and manually typing in the page.) Ur help is appreciated Thanks in Advance Goutham

  Read the article

• Cygwin unable to compile

  - by christine

  I just downloaded Cygwin, I've never used it before cause I've always used putty. Cygwin is not letting me compile; I can see the files but it just doesn't let me compile and I do not understand why, am I doing something wrong? This is what's going on: Christine@Christine-PC ~ $ ls 8.6.c a.b.c a.c.c core new 2.txt test.c 9.13.c a.c a.out days.c new2.c test.txt Christine@Christine-PC ~ $ gcc a.c.c -bash: gcc: command not found

  Read the article

• How do I securely execute commands as root via a web control panel?

  - by Chris J

  I would like to build a very simple PHP based web based control panel to add and remove users to/from and add and remove sections to/from nginx config files on my linode vps (Ubuntu 8.04 LTS). What is the most secure way of executing commands as root based on input from a web based control panel? I am loathe to run PHP as root (even if behind an IP tables firewall) for the obvious reasons. Suggestions welcome. It must be possible as several commercial (and bloated, for my needs) control panels offer similar functionality. Thanks

  Read the article

• invalid argument in bash script when port is bad

  - by user273689

  When I do this command I get an error when there is something wrong with the eth3. RESC="1234" RESD="1234" RESO="1234" RESC=$(ssh -q vmx@$1 cat /sys/class/net/$2/carrier) RESO=$(ssh -q vmx@$1 cat /sys/class/net/$2/operstate) RESD=$(ssh -q vmx@$1 cat /sys/class/net/$2/dormant) cat: /sys/class/net/eth3/carrier: Invalid argument cat: /sys/class/net/eth3/dormant: Invalid argument How can I use the invalid argument inside the RESC and RESD variable Thanks

  Read the article

• Install Exim 4.7 on Centos system running Cpanel & Whm

  - by solomongaby

  Hello, I want to install DKIM on our server and as far as i found out that is only suported in exim 4.7 Is there a way to install it on our server and not mess up the cpanel configuration ? I tryed to do a /scripts/eximup but that only goes to 4.69 build 23 thanks.

  Read the article

• Website memory problem

  - by Toktik

  I have CentOS 5 installed on my server. I'm in VPS server. I have site where I have constant online ~150. First look on site looks OK. But when I go through links, sometimes I receive Out of memory PHP error. It looks like this Fatal error: Out of memory (allocated 36962304) (tried to allocate 7680 bytes) in /home/host/public_html/sites/all/modules/cck/modules/fieldgroup/fieldgroup.install on line 100 And always, not allocated memory is very small. In average I have 30% CPU load, 25% RAM load. So I think here is not a physical memory problem. My PHP memory limit was set to 1500MB. My apache error log looks like this [Thu Sep 30 17:48:59 2010] [error] [client 91.204.190.5] Out of memory, referer: http://www.host.com/17402 [Thu Sep 30 17:48:59 2010] [error] [client 91.204.190.5] Premature end of script headers: index.php, referer: http://www.host.com/17402 [Thu Sep 30 17:48:59 2010] [error] [client 91.204.190.5] Out of memory, referer: http://www.host.com/17402 [Thu Sep 30 17:48:59 2010] [error] [client 91.204.190.5] Premature end of script headers: index.php, referer: http://www.host.com/17402 [Thu Sep 30 17:49:00 2010] [error] [client 91.204.190.5] File does not exist: /home/host/public_html/favicon.ico Past I have not met with this on my server and the problem appeared itself. Besides this I'm receiving some server errors on mail. cpsrvd failed @ Fri Sep 24 16:45:20 2010. A restart was attempted automagically. Service Check Method: [tcp connect] Failure Reason: Unable to connect to port 2086 Same for tailwatchd. Support tried, and can't help me...

  Read the article

• Apache is running the wrong version of PHP.

  - by The Rook

  I am trying to enable CURL in php, and possibly update php as well. I have run into a road block where Apache seems to be running the wrong version of PHP. Here is some evidence. #lsof | grep php httpd 18397 nobody 135w REG 8,3 242 528537 /usr/local/apache/modules/libphp5.so I download the latest php 5.2.13 and build from source. I run a service httpd stop, do a make install and then I manually overwrite /usr/local/apache/modules/libphp5.so just to be safe. Using ldd i can see that its my fresh binary compiled with curl (the old one doesn't have curl.) ldd /usr/local/apache/modules/libphp5.so | grep curl libcurl.so.4 => /usr/local/lib/libcurl.so.4 (0x0064e000) I execute a phpinfo() and 5.2.3 is being executed instated of my new 5.2.13 and "curl" is nowhere to be found. What am I doing wrong? Why is curl disabled even though its statically linked? This is a RHEL 5.5 system.

  Read the article

< Previous Page | 370 371 372 373 374 375 376 377 378 379 380 381  | Next Page >