Search Results

Search found 71537 results on 2862 pages for 'virtual com port'.

Page 375/2862 | < Previous Page | 371 372 373 374 375 376 377 378 379 380 381 382  | Next Page >

• Glassfish basic configuration forgotten

  - by Toto

  I installed glassfish v3 some time ago and it's been a while since I last used it, so I forgot the port on which the server is listening and the port on which the admin console is listening. Moreover, i forgot the admin password! I'm pretty sure I've change them because I've tried the default values and didn't work. Is there any configuration file where I can look for them (at least the port numbers)?

  Read the article

• What does the fan speed sensor really report?

  - by T. Verron

  I have an overheating issue on my netbook (ASUS EeePC 1015PW), which I'm trying to troubleshoot. Using lm-sensors while overheating gave me this output : acpitz-virtual-0 Adapter: Virtual device temp1: +86.0°C (crit = +100.0°C) eeepc-isa-0000 Adapter: ISA adapter fan1: 4089 RPM coretemp-isa-0000 Adapter: ISA adapter Core 0: +82.0°C (crit = +100.0°C) Core 1: +80.0°C (crit = +100.0°C) But I can't hear the fan. So I enabled manual pwm controling and set the fan to full speed, and after a few minutes I got this output : acpitz-virtual-0 Adapter: Virtual device temp1: +65.0°C (crit = +100.0°C) eeepc-isa-0000 Adapter: ISA adapter fan1: 4016 RPM coretemp-isa-0000 Adapter: ISA adapter Core 0: +62.0°C (crit = +100.0°C) Core 1: +58.0°C (crit = +100.0°C) And this time I could hear the fan spinning. So there's quite obviously an issue with either fan control or fan monitoring. Hence the question : what kind of physical information does the fan sensor really report? Thank you PS. I should have added that the computer is a small, hard-to-disassemble netbook, so I can't and don't want to try experiments like "block the fan and see what the sensor reports".

  Read the article

• SSL to SSL Redirects in IIS - Possible?

  - by Eric

  We have a situation where we would like to redirect https://service1.domain.com to https://service2.domain.com. I know this is very simple with http endpoints, but I'm not too sure about https. We have some legacy windows application web service clients that will not be updating their software version soon, and we cannot update their web references to https://service2.domain.com. Is there any way to leave these web service clients pointing to https://service1.domain.com, but have their requests forwarded to (and responded to by) https://service2.comain.com? The old server is running IIS 6.0. The new server is running IIS 7.0. We could probably upgrade it to 7.5 if needed, but I'm not certain. We could also probably make a seamless transition of the old web service to a new server using public DNS, but we cannot change the DNS name of "service1.domain.com." Thanks ServerFault!

  Read the article

• Using gitlab behind Apache proxy all generated urls are wrong

  - by Hippyjim

  I've set up Gitlab on Ubuntu 12.04 using the default package from https://about.gitlab.com/downloads/ {edit to clarify} I've set up Apache to proxy and run the nginx server the package installed on port 8888 (or so I thought). As I had Apache installed already I have to run nginx on localhost:8888. The problem is, all images (such as avatars) are now served from http://localhost:8888, and all the checkout urls Gitlab gives are also localhost - instead of using my domain name. If I change /etc/gitlab/gitlab.rb to use that url, then Gitlab stops working and gives a 503. Any ideas how I can tell Gitlab what URL to present to the world, even though it's really running on localhost? /etc/gitlab/gitlab.rb looks like: # Change the external_url to the address your users will type in their browser external_url 'http://my.local.domain' redis['port'] = 6379 postgresql['port'] = 2345 unicorn['port'] = 3456 and /opt/gitlab/embedded/conf/nginx.conf looks like: server { listen localhost:8888; server_name my.local.domain; [Update] It looks like nginx is still listening on the wrong port if I don't specify localhost:8888 as the external_url. I found this in /var/log/gitlab/nginx/error.log 2014/08/19 14:29:58 [emerg] 2526#0: bind() to 0.0.0.0:80 failed (98: Address already in use) 2014/08/19 14:29:58 [emerg] 2526#0: bind() to 0.0.0.0:80 failed (98: Address already in use) 2014/08/19 14:29:58 [emerg] 2526#0: bind() to 0.0.0.0:80 failed (98: Address already in use) 2014/08/19 14:29:58 [emerg] 2526#0: bind() to 0.0.0.0:80 failed (98: Address already in use) 2014/08/19 14:29:58 [emerg] 2526#0: bind() to 0.0.0.0:80 failed (98: Address already in use) 2014/08/19 14:29:58 [emerg] 2526#0: still could not bind() Apache setup looks like: <VirtualHost *:80> ServerName my.local.domain ServerSignature Off ProxyPreserveHost On AllowEncodedSlashes NoDecode <Location /> ProxyPass http://localhost:8888/ ProxyPassReverse http://127.0.0.1:8888 ProxyPassReverse http://my.local.domain </Location> </VirtualHost> Which seems to proxy everything back ok if Gitlab listens on localhost:8888 - I just need Gitlab to start displaying the right URL, instead of localhost:8888.

  Read the article

• How do you redirect pages from a directory to a subdirectory?

  - by kezzman11

  I had recently moved all the content on my website from being in the www.mysite.com/shop directory to being in the root directory. This means that I needed to redirect any request to visit a page with the /shop directory back to the same page in the root directory eg. www.mysite.com/shop/categories/washroom to www.mysite.com/categories/washroom This needed to happen with all pages in my site that were previously using the /shop directory. I was given a solution on here which was: RedirectMatch (^/shop/)(.*) http://www.mysite.com/$2 and it works perfectly however now I have had to switch back to using our old version of our software which is located at the /shop directory so I need the complete opposite redirect now eg. www.mysite.com/categories/washroom to www.mysite.com/shop/categories/washroom Can anyone help me please?

  Read the article

• Daemon process exiting when shell closes

  - by Pace

  I have a script which starts a daemon process and then sleeps for 20 seconds. If I run the script on SLES11 SP1 or RHEL6 then after the script exits the process is still running. If I run the script on SLES11 SP3 or RHEL6.3 then after the script exits the process is no longer running. The process continues to run for the entire 20 second sleep and is killed when the process exits. The script is run via expect so the script's entire shell exits with the process. Obviously if this wasn't a daemon it was starting I wouldn't be surprised. Also, I suspect the problem isn't the OS version as much as it is the difference in the way we've setup the newer servers (no idea what those differences are though, the older servers were set up years ago). During the 20 seconds the process runs if I do a ps I get the following: root 4699 1 0 15:14 pts/2 00:00:00 sudo -u openmq /opt/PacketPortal/openmq/default/bin/imqbrokerd -bgnd -autorestart -silent -port 7676 -Dimq.service.activelist=admin,ssljms -D openmq 4701 4699 0 15:14 pts/2 00:00:00 /bin/sh /opt/PacketPortal/openmq/default/bin/imqbrokerd -bgnd -autorestart -silent -port 7676 -Dimq.service.activelist=admin,ssljms -Dimq.ssl The fact that the parent process of 4699 is 1 seems to suggest to me that the process has been correctly daemonized. However, after the expect script exits both 4699 and 4701 are killed. What could be causing this? UPDATE I've printed the same output on the servers that work. During the 20 second sleep I get: openmq 18652 1 0 15:44 pts/1 00:00:00 /bin/sh /opt/PacketPortal/openmq/default/bin/imqbrokerd -bgnd -autorestart -silent -port 7676 -Dimq.service.activelist=admin,ssljms -Dimq.ssljms.tls.port=7680 openmq 18686 18652 8 15:44 pts/1 00:00:02 /usr/java/latest/bin/java -cp /opt/PacketPortal/openmq/default/bin/../lib/imqbroker.jar:/opt/PacketPortal/openmq/default/bin/../lib/imqutil.jar:/opt/PacketPortal/ope After the 20 second sleep I get: openmq 18652 1 0 15:44 ? 00:00:00 /bin/sh /opt/PacketPortal/openmq/default/bin/imqbrokerd -bgnd -autorestart -silent -port 7676 -Dimq.service.activelist=admin,ssljms -Dimq.ssljms.tls.port=7680 openmq 18686 18652 5 15:44 ? 00:00:02 /usr/java/latest/bin/java -cp /opt/PacketPortal/openmq/default/bin/../lib/imqbroker.jar:/opt/PacketPortal/openmq/default/bin/../lib/imqutil.jar:/opt/PacketPortal/ope After the script exits it disconnects the controlling terminal. I wonder why it doesn't do that on the newer servers. UPDATE Here is the section of the script that actually launches OpenMQ. The -bgnd flag is what is supposed to daemonize it. sudo -u openmq $IMQ_HOME/bin/$EXECUTABLE -bgnd $BROKER_OPTIONS $ARGS > /dev/null 2>&1 &

  Read the article

• how to access website hosted on iis of virutal machine

  - by user29402

  Hi, I have installed Windows server 2008 on the latest version of Sun Virtual box. I have some web sites hosted in the Windows Server virtual machine. How can I access the websites hosted on the virtual machine from the host machine. thanks in advance.

  Read the article

• Hyper-V management remotely

  - by Péter

  I'll tell you in advance that I'm newbie in the topic. I have a Win8 (Home) machine with Hyper-V installed behind a router. The router has a public IP and a domain attached. I have another Win8 (Work) machine also installed Hyper-V. I want to access to my home Hyper-V via Hyper-V Manager so I can manage my virtual machines from work. I found this article but I don't know if it's applicable to me. I thought that a simple port forwarding should work and I only need to do is grant the Work HV manager my domain and the port I choose and if it's pop a login form I only need to fill the user data of my Home computer? How can I solve this? My thoughts revolve around: - Port forwarding - set domain+port and set my home user - Set up a VPN and use the local ip address of my home computer (it looks like a little cumbersome and my router only support PPTP) I'm open to any other solution too. Thanks, Péter

  Read the article

• How to add command line arguments to command line arguments in Windows shortcut?

  - by Pawin

  I know I can add a command line argument/option to a shortcut this way; for example: "C:\Program Files\Internet Explorer\iexplore.exe" www.a.com So IE will connect to a.com when it starts up. What I would like to do is to get IE connecting to a.com when I call it through another program like the following: C:\Windows\SysWOW64\ForceBindIP.exe 192.168.1.151 "C:\Program Files\Internet Explorer\iexplore.exe" www.a.com This does not work. IE starts up but doesn't go to a.com. It seems like the argument is either ignored or is understood as an argument of ForceBindIP instead (I'm not sure). What I am trying to do is to create 2 IE shortcuts such each of them binds one IE window to one NIC and one particular website. So adding the www.a.com etc in its startup list won't help. OS is Windows 8. Apologize if this has been asked and answered before. Please suggest keywords for searching if that's the case.

  Read the article

• Switching to LDAP over SSL for Active Directory

  - by bkildow

  On our active directory server, I would like to enable LDAP over SSL as per this: http://support.microsoft.com/kb/321051. I am wondering, once this is set up, will LDAP still be listening on the standard port, 389 once this is implemented as well as the secure port? Or will the secure port completely replace the standard port as an option to connect to? Also, will there need to be any other configurations besides the steps in the article for doing this? In other words, will domain users still be able to authenticate like normal, or is there additional setup that would need to occur?

  Read the article

• Tomcat Solr times out

  - by user568458

  (Plesk 10.4 centos 5.8 linux apache2 server, with Tomcat5 on port 8080 and Apache Solr) I get "The connection has timed out" on requesting domain.com:8080 or www.domain.com:8080 or ip.ad.dr.ess:8080 Every reason I can find why this might be seems not to be the case: Plesk thinks Tomcat is running fine and lists it as an active service. The firewall currently has an accept all rule on port 8080. There's nothing relevant in the catalina tomcat logs (/var/log/tomcat5) - just some stuff from last time tomcat was started. There's no record at all of the requests that fail. netstat -lnp | grep 8080 gives the following, which I beleive means Tomcat is listening to requests to port 8080 on all ip addresses from any ip and any port (please correct me if I'm wrong): : tcp 0 0 0.0.0.0:8080 0.0.0.0:* LISTEN 4018/java This covers every cause of this time out that I can find - so I must be missing something fundamental. It seems Tomcat is running, listening to the right port, is getting an appropriate IP address, is not obstructed by a firewall and is not failing after receiving a request in a way which would be recorded in the logs (so I believe it can't be out of memory, or anything like that). I'm all out of ideas on how to continue debugging this. I must have overlooked something obvious. Can anyone help?

  Read the article

• isa 2004 - banned site rule cause slow internet

  - by Holian

  Hi Gods, We have windows server 2003 with isa 2004. Our clients uses internet with proxy. We have two isa rule: order name action protocolls from/listener to condition 1. trafic ALLOW all outbound all networks all networks all users 2. FTP ALLOW FTP Server EXTERNAL/INTERNAL/Local host 10.1.1.1 So we have to "bann" a few webpage (like facebook, youtube...etc...), so we make a new rule 0. banned DENY HTTP internal denied pages all users In the denied pages we have the *.facebook.com domain set. After we enable this rule, the entire internet slows down. The banning rule works well, redirect to an internal site, but the other sites.... If i open a page..it normally takes 3-10 sec to load, but after this rule this time is: 2-4 minutes. In the monitor / logging menu we got a few FAILED CONNECTION ATTEMPT like: Log type: Web Proxy (Forward) Status: 304 Not Modified Rule: All local traffic Source: Internal ( 10.1.1.1:0 ) Destination: External ( 172.24.28.22:3128 ) Request: GET http://www.konyvelozona.hu/wp-content/uploads/nyugdijas-holgy-2.jpg Filter information: Req ID: 17270b72 Protocol: http User: anonymous Additional information Client agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.3072... Object source: Verified Cache Processing time: 9047 Cache info: 0x18801002 MIME type: - In the event log we got a few log: Description: The Web Proxy filter failed to bind its socket to 10.1.1.1 port 80. This may have been caused by another service that is already using the same port or by a network adapter that is not functional. To resolve this issue, restart the Microsoft Firewall service. The error code specified in the data area of the event properties indicates the cause of the failure. The failure is due to error: 0x8007271d The Web Proxy filter failed to bind its socket to 127.0.0.1 port 80. This may have been caused by another service that is already using the same port or by a network adapter that is not functional. To resolve this issue, restart the Microsoft Firewall service. The error code specified in the data area of the event properties indicates the cause of the failure. The failure is due to error: 0x8007271d If i tpye: netstat -o -n -a | findstr 0.0:80 then i got, tcp 0.0.0.0:80 0.0.0.0:0 LISTEN 4 udp 0.0.0.0:8031 *.* 2780 udp 0.0.0.0:8082 *.* 2780 Some month ago we installed XMAP, but now we only use mysql. Apache service stopped. In the Xamp port check menu i see: Service POrt Status Apache (http) 80 Process: System Maybee this is the problem? I dont know what should i do now... Thank you folks.

  Read the article

• DNS SERVFAIL and NXDOMAIN on specific hostname

  - by David George

  I have two DNS servers in my domain, Windows 2003 and Windows 2008, but recently both are failing to route users to www.cdw.com. I have had no other complaints with any other websites, but when trying to use cdw.com the page never loads. I tried to resolve the hostname and get the NXDOMAIN error below: MyComputer:~ me$ nslookup cdw.com ;; Got SERVFAIL reply from 192.168.2.1, trying next server Server: 192.168.2.2 Address: 192.168.2.2#53 ** server can't find cdw.com: NXDOMAIN MyComputer:~ me$ nslookup serverfault.com Server: 192.168.2.2 Address: 192.168.2.2#53 Non-authoritative answer: Name: serverfault.com Address: 198.252.206.16

  Read the article

• Ping: Destination Host Unreachable, from the destination host itself

  - by phunehehe

  I have a server that responds in a weird way to ping: $ ping hostname.com PING hostname.com (<IP address>) 56(84) bytes of data. From hostname.com (<IP address>) icmp_seq=1 Destination Host Unreachable From hostname.com (<IP address>) icmp_seq=2 Destination Host Unreachable From hostname.com (<IP address>) icmp_seq=3 Destination Host Unreachable From hostname.com (<IP address>) icmp_seq=4 Destination Host Unreachable I'm confused, as the messages come from the server that I want to ping, and at the same time it's saying Destination Host (itself) Unreachable. Pinging by IP address yields the same result. The server is online and operating normally. What could be the cause?

  Read the article

• BIND DNS server (Windows) - Unable to access my local domain from other computers on LAN

  - by Ricardo Saraiva

  I have a BIND DNS server running on my Windows 7 development machine and I'm serving pages with WAMPSERVER. My ideia is to develop some tools (in PHP) for my intranet at work and I want them to be accessible via LAN in this format: http://tools.mycompany.com I've already placed BIND and I can access http://tools.mycompany.com on the machine that holds BIND server, but I cannot access it from other LAN computers. I've done the following on my router: defined static IP's for all LAN computers set Port Forwarding to my server (remember: it serves DNS and Web pages) set DNS server configuration to point to my LAN server On LAN computers, I went to Local Area Network properties and also changed the DNS server IP in order to point to my local DNS server. If it helps, here is my named.conf file: options { directory "c:\windows\SysWOW64\dns\etc"; forwarders {127.0.0.1; 8.8.8.8; 8.8.4.4;}; pid-file "run\named.pid"; allow-transfer { none; }; recursion no; }; logging{ channel my_log{ file "log\named.log" versions 3 size 2m; severity info; print-time yes; print-severity yes; print-category yes; }; category default{ my_log; }; }; zone "mycompany.com" IN { type master; file "zones\db.mycompany.com.txt"; allow-transfer { none; }; }; key "rndc-key" { algorithm hmac-md5; secret "qfApxn0NxXiaacFHpI86Rg=="; }; controls { inet 127.0.0.1 port 953 allow { 127.0.0.1; } keys { "rndc-key"; }; }; ...and a single zone I've defined - file db.mycompany.com.txt: $TTL 6h @ IN SOA tools.mycompany.com. hostmaster.mycompany.com. ( 2014042601 10800 3600 604800 86400 ) @ NS tools.mycompany.com. tools IN A 192.168.1.4 www IN A 192.168.1.4 On the file above 192.168.1.4 is the IP of the local machine inside my LAN. Can someone help me here? I need my web pages to be accessible from other computers inside my LAN using my custom domain name. I've tried on other computers and they can access my server via http://192.168.1.4/, but no able when using http://tools.mycompany.com . Please, consider the following: I'm completely new to BIND I have basic knowledge in Apache configuration Thanks a lot for your help.

  Read the article

• htaccess IP blocking with custom 403 Error not working

  - by mrc0der

  I'm trying to block everyone but 1 IP address from my site on a server running apache & centos. My setup is follows the example below. My server: `http://www.myserver.com/` My .htaccess file <limit GET> order deny,allow deny from all allow from 176.219.192.141 </limit> ErrorDocument 403 http://www.google.com ErrorDocument 404 http://www.google.com When I visit http://www.myserver.com/ from an invalid IP, it gives me a generic 403 error. When I visit http://www.myserver.com/page-does-not-exist/ it redirects me correctly to http://www.google.com but I can't figure out why the 403 error doesn't redirect me too. Anyone have any ideas?

  Read the article

• How to connect to memcached from another machine

  - by Oscar Del Ben

  I'm trying to use memcached from a different machine (which has access to my server), but I can't figure out how. on the memcached machine I can test the connection by running telnet 127.0.0.1 port And it works, but on the other machine it just keeps trying to connect telnet machine_address port Trying machine_address... I'm not sure if I should set up something else to get it working. I know the port is working and accessible because if I try to run other services on it, they works. Os is ubuntu

  Read the article

• How to Setup Ubuntu Mail Server with Google Apps?

  - by Apreche

  I have a domain, let's call it foobar.com. All of the MX records for foobar.com point to Google's mail servers because I am using Google Apps for your domain to manage it. It's great because everyone gets all the advantages of GMail, but our e-mail addresses aren't @gmail.com. I also have a server. Primarily, it's a web server, but it also serves other things. One of the things it serves is the web site for foobar.com and also sites for various virtual hosts such as shop.foobar.com and forum.foobar.com. The server is running Ubuntu 8.04, because I like using LTS releases in production. The thing is, there are various applications running on the server that need the ability to send out emails. Various applications, like the cron jobs, send me e-mails in case of errors. Some of the web applications need to send e-mail to users when they forget their passwords, to confirm new registered users, etc. Lastly, it's nice to be able to send e-mail from the command line using the mail command, or mutt. How can I setup the mail on the web server to go through the Google apps mail servers? I don't need the web server to receive mail, though that would be cool. I do need it to be able to send mail as any legitimate address @foobar.com. That way the forum application can send mails with forum@foobar.com in the from field, and the ecommerce application will have shop@foobar.com in the from field. Also, by sending the mail through the Google servers, we can avoid a lot of the problems with the e-mails being blocked by various spam filters on the web. Google's SMTP servers are trusted a lot more than mine would be. I'm pretty good with administering Linux systems, but I am absolutely brain dead when it comes to e-mail. I need step by step directions from beginning to end on how to set this up. I need to know every thing to install, and every single change to the configuration files that is necessary. I have tried following various howtos and guides in the past, but none of them were quite right. Either they didn't work at all, or they offered a configuration that is not what I wanted. Please help. Thanks.

  Read the article

• Connect to WEP Wireless Network by command line on Ubuntu

  - by Tim

  Hi, I am a newbie to both network and Linux. I am now trying to connect to a WEP wireless network by command line on my Ubuntu 8.10, because the Network Manager does not support 64 bit WEP. (1) I firstly bring down the Network Manager and then try to connect to a wireless network, whose essid is candy and password is 5673212741. But it fails as shown in the following. I wonder why and how to do it correctly? $ sudo /etc/init.d/NetworkManager stop * Stopping network connection manager NetworkManager [ OK ] $ sudo iwconfig wlan0 essid candy opendo iwconfig wlan0 key 18018ce78e open $ sudo iwconfig wlan0 key 5673212741 open $ sudo dhclient wlan0 There is already a pid file /var/run/dhclient.pid with pid 9971 killed old client process, removed PID file Internet Systems Consortium DHCP Client V3.1.1 Copyright 2004-2008 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/sw/dhcp/ wmaster0: unknown hardware address type 801 wmaster0: unknown hardware address type 801 Listening on LPF/wlan0/00:0e:9b:cd:4e:18 Sending on LPF/wlan0/00:0e:9b:cd:4e:18 Sending on Socket/fallback DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 12 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 20 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 13 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 9 No DHCPOFFERS received. No working leases in persistent database - sleeping. $ ping www.bbc.co.uk ping: unknown host www.bbc.co.uk (2) A less important question: why the scan for wireless networ does not work after I bring down the Network Manager? $ sudo /etc/init.d/NetworkManager stop * Stopping network connection manager NetworkManager [ OK ] $ sudo iwlist wlan0 scan wlan0 Interface doesn't support scanning : Network is down Thanks and regards!

  Read the article

• phpbb behind a reverse proxy

  - by asciitaxi

  Hi, i've got a django app running on apache behind an nginx reverse proxy. Nginx takes requests on port 80 and forwards them to apache on 127.0.0.1:81. This works fine. Now I want to run phpbb on apache under /forums. My problem is that when phpbb does a redirect, it seems to redirect to the internal apache port, rather than port 80. So, for instance when I first go to http://my-dev-server/forums to configure php bb, it immediately redirects to http://127.0.0.1:81/forums/install/index.php. Is there something I need to do in nginx/apache/phpbb config to get it to redirect to the external port? Thanks very much!

  Read the article

• Why my dns server ip got blacklisted instead of my email server ip?

  - by Khurram Masood

  We are hosting our own dns server our scenario is as under; dns ip: a.b.c.1 fqdn:ns1.example.com ------ reverse lookup to a.b.c.1 mail server ip a.b.c.2 mail.example.com ------ reverse lookup to a.b.c.2 smtp.example.com ------ no reverse lookup pop.example.com ------ no reverse lookup web server ip a.b.c.3 example.com ------ reverse lookup to a.b.c.3 www.example.com ------ no reverse lookup a few days back our dns server ip got blacklisted and all our services were down from outside. We had also added a new dns server on a separate network that caused our domain and machines with same names as above to resolve on different ips, can this b a cause of being blacklisted? But all blacklists points towards spamming. Can anyone please explain why my dns ip got blacklisted instead of my email or web server ip?

  Read the article

• How to change the Nginx default folder?

  - by Ido Bukin

  I setup a server with Nginx and i set my Public_HTML in - /home/user/public_html/website.com/public And its always redirect to - /usr/local/nginx/html/ How can i change this ? Nginx.conf - user www-data www-data; worker_processes 4; events { worker_connections 1024; } http { include mime.types; default_type application/octet-stream; sendfile on; tcp_nopush on; tcp_nodelay off; keepalive_timeout 5; gzip on; gzip_comp_level 2; gzip_proxied any; gzip_types text/plain text/css application/x-javascript text/xml application/xml application/xml+rss text/javascript; include /usr/local/nginx/sites-enabled/*; } /usr/local/nginx/sites-enabled/default - server { listen 80; server_name localhost; location / { root html; index index.php index.html index.htm; } # redirect server error pages to the static page /50x.html error_page 500 502 503 504 /50x.html; location = /50x.html { root html; } } /usr/local/nginx/sites-available/website.com - server { listen 80; server_name website.com; rewrite ^/(.*) http://www.website.com/$1 permanent; } server { listen 80; server_name www.website.com; access_log /home/user/public_html/website.com/log/access.log; error_log /home/user/public_html/website.com/log/error.log; location / { root /home/user/public_html/website.com/public/; index index.php index.html; } # pass the PHP scripts to FastCGI server listening on # 127.0.0.1:9000 location ~ \.php$ { fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; include /usr/local/nginx/conf/fastcgi_params; fastcgi_param SCRIPT_FILENAME /home/user/public_html/website.com/public/$fastcgi_script_name; } } The error message I get is Fatal error: require_once() [function.require]: Failed opening required '/usr/local/nginx/html/202-config/functions.php' the server try to find the file in the Nginx folder and not in my Public_Html

  Read the article

• Remotely viewing IP camera on Belkin N450 DB router

  - by Mike Miller

  I need to setup a wireless IP camera (Trendnet TV-IP501W) on my network so that it is remotely visible from anywhere. Right now I successfully connected it to my home network but nothing else. My router is a Belkin N450 DB. Any help would be much appreciated, including what this would be referred to as so I could more easily ask another forum. I believe it is something like "port forwarding" but I'm not sure. Ok, I believe I found this in the "virtual servers" section. It asks for enabling with a check box, description, inbound port, type, private IP, & private port. In that order I have checked enabling, "camera", 150, TCP, 81, and 81? I'm assuming inbound ports are the numbers I use for the home network - xxx.xxx.x.150 and the 81 was for private. I used my WAN IP and added :81 and .81 but didn't get it. What am I doing wrong? Ok, I believe I found this in the "virtual servers" section. It asks for enabling with a check box, description, inbound port, type, private IP, & private port. In that order I have checked enabling, "camera", 150, TCP, 81, and 81? I'm assuming inbound ports are the numbers I use for the home network - xxx.xxx.x.150 and the 81 was for private. I used my WAN IP and added :81 and .81 but didn't get it. What am I doing wrong?

  Read the article

• 27 days after domain transfer name servers not propogated

  - by Thom Seddon

  We recently bought the domain: embarrassingnightclubphotos.com 7 days after accepting the transfer the domain finally transferred to our registrar and we immediately changed the name servers from ns*.netregistry.net to amy.ns.cloudflare.com and cody.ns.cloudflare.com 20 days after changing the name servers, the majority of tests show that both old and new nameservers are still being reported: http://intodns.com/embarrassingnightclubphotos.com http://www.whatsmydns.net/#NS/embarrassingnightclubphotos.com We are now ready to launch the new site but this issue is plagueing us as a high proportion of the traffic is still receiving the old nameserves and so hitting the old server. You can tell if you have hit the old or new server as the old server has the value "A" for the meta tag "Location" and the new server has "U". (The old server just has an iframe too!) I have never had this problem before - who is causing this and how should we go about reaching a resolution? Thanks

  Read the article

• [tcpdump] Proxy delegate refusing connexion ?

  - by simtris

  Hi guys, I'm a little disapointed ! My aim was to build a VERY simple smtp proxy under debian to handle mail from a port (51234) and forward it to the standard 25 port. I compile and install a "delegate" witch can handle easily that. It's working very well like that : delegated SERVER="smtp://anotherSmtpServer:25" -P51234 The strange thing is, it's working on my virtual test machine and on the dedicated server in local but I can't manage to use it trought internet. I test it like that. telnet [mySrv] 51234 Of course, no firewal, no deny host, no ined/xined, the service delegated is listening on the right port ... 2 clues : The port is answering trought internet with nmap as "51234/tcp open tcpwrapped" have a look at the tcpdump following : 22:50:54.864398 IP [myIp].1699 [mySrv].51234: S 2486749330:2486749330(0) win 65535 22:50:54.864449 IP [mySrv].51234 [myIp].1699: S 2486963525:2486963525(0) ack 2486749331 win 5840 22:50:54.948169 IP [myIp].1699 [mySrv].51234: . ack 1 win 64240 22:50:54.965134 IP [mySrv].43554 [myIp].auth: S 2485396968:2485396968(0) win 5840 22:50:55.243128 IP [myIp] [mySrv]: ICMP [myIp] tcp port auth unreachable, length 68 22:50:55.249646 IP [mySrv].51234 [myIp].1699: F 1:1(0) ack 1 win 46 22:50:55.309853 IP [myIp].1699 [mySrv].51234: . ack 2 win 64240 22:50:55.310126 IP [myIp].1699 [mySrv].51234: F 1:1(0) ack 2 win 64240 22:50:55.310137 IP [mySrv].51234 [myIp].1699: . ack 2 win 46 The part "auth" seems suspect to me but didn't ring a bell. I could certaily do with some help. Thx a lot !

  Read the article

< Previous Page | 371 372 373 374 375 376 377 378 379 380 381 382  | Next Page >