Search Results

Search found 41072 results on 1643 pages for 'bash function'.

Page 376/1643 | < Previous Page | 372 373 374 375 376 377 378 379 380 381 382 383  | Next Page >

  • order of operations for environment variables

    - by alyda
    I want to understand how environment variables are set and reset (overridden). I'm running Apache/2.2.24 (Unix) PHP/5.4.14 on a mac . My theory is this: Environment vars can be set in bash, then they can be overwritten with httpd.conf preceding a VirtualHost directive that precedes php.ini, which can then be overwritten by .htaccess (if allowable) and finally by PHP I tried the following: setting environment variable in bash: I added export ENVIRONMENT='local' to my ~/.bashrc file, restarted apache and did not get any output from print_r($_ENV); (in a simple index.php file at the root of my webserver). I also tried putting ENVIRONMENT='local' into /etc/environment, and restarting apache, nothing, as well as /etc/bashrc, restart apache. still nothing. setting environment variable in httpd.conf: I added SetEnv ENVIRONMENT 'local-httpd to the end of my /etc/apache2/httpd.conf file (but before I load other conf files, such as virtual host [Include /private/etc/apache2/other/*.conf]). I now see the variable in the array print_r($_SERVER); but not print_r($_ENV);. setting environment variable in httpd-vhosts.conf: I added SetEnv ENVIRONMENT 'local-vhost to my /etc/apache2/extra/httpd-vhosts.conf file in my generic directive that points to my default document root. I now see the variable has been overwritten (to local-vhost from local-httpd, so I know where the variable is getting set). setting environment variable in php.ini: while searching for a proper place to put my environment variable, I noticed that variables_order = "GPCS" was set to the production value rather than EGPCS. I changed it, restarted my server and found that I was now getting output for print_r($_ENV); but not my expected custom variable. It also appears that I am not able to set a custom variable in this file. Please tell me if I am wrong setting environment variable in .htaccess: I added SetEnv ENVIRONMENT 'local-htaccess'. This worked as expected, overwriting all other values that were set. setting / overwriting environment variable in PHP: if (...) { putenv('ENVIRONMENT=local'); } I'm asking this question because I have a lot of local and remote testing servers, some of which may or may not allow me access to modify httpd, httpd-vhost, php.ini or environment variables. I want to understand what is best for those difference scenarios (shared hosting, heroku, local servers, etc) I obviously don't know how to properly set the environment variable in bash in a way that php can use it, I'd like to know how to do that (as I think Heroku does something similar with heroku config set...)

    Read the article

  • how to remove leading whitespace from filenames/folders snow?

    - by timoto
    how do I remove leading whitespace from filenames/folders in OSX snow ? As provided below by Lri I was able to remove trailing whitespace using this #!/bin/bash IFS=$'\n' for d in {1..9}; do find ~/Desktop -name '* ' -depth $d | while read f; do mv "$f" "$(sed 's/ *$//' <<< "$f")" done done Now I'm trying to remove leading whitespace with this #!/bin/bash IFS=$'\n' for d in {1..9}; do find ~/Desktop -name '* ' -depth $d | while read f; do mv "$f" "$(sed 's/^ *//;s/ *$//' <<< "$f")" done done but it doesn't work. What am I doing wrong ?

    Read the article

  • systemd initiated uwsgi process shuts down after a while

    - by Calvin Cheng
    So I wrote this simple systemd service script:- [Unit] Description=uwsgi server script [Service] User=web Group=web WorkingDirectory=/var/www/prod/myproject/releases/current ExecStart=/bin/bash -c 'source ~/.bash_profile; workon myproject; uwsgi --ini /var/www/prod/myproject/releases/current/myproject/uwsgi_prod.ini' [Install] WantedBy=multi-user.target which works fine - it starts up and I can see my uwsgi processes in htop. However, it inexplicably shuts down after being idle for 5 minutes. If I start this process manually in bash console by executing, as web user:- source ~/.bash_profile workon myproject uwsgi --ini /var/www/prod/myproject/releases/current/myproject/uwsgi_prod.ini my process does not die after being idle. What could the problem be?

    Read the article

  • org-sort multi: date/time (?d ?t) | priority (?p) | title (?a)

    - by lawlist
    Is anyone aware of an org-sort function / modification that can refile / organize a group of TODO so that it sorts them by three (3) criteria: first sort by due date, second sort by priority, and third sort by by title of the task? EDIT: I believe that org-sort by deadline (?d) has a bug that cannot properly handle undated tasks. I am working on a workaround (i.e., moving the undated todo to a different heading before the deadline (?d) sort occurs), but perhaps the best thing to do would be to try and fix the original sorting function. Development of the workaround can be found in this thread (i.e., moving the undated tasks to a different heading in one fell swoop): How to automate org-refile for multiple todo EDIT: Apparently, the following code (ancient history) that I found on the internet was eventually modified and included as a part of org-sort-entries. Unfortunately, undated todo are not properly sorted when sorting by deadline -- i.e., they are mixed in with the dated todo. ;; multiple sort (defun org-sort-multi (&rest sort-types) "Multiple sorts on a certain level of an outline tree, or plain list items. SORT-TYPES is a list where each entry is either a character or a cons pair (BOOL . CHAR), where BOOL is whether or not to sort case-sensitively, and CHAR is one of the characters defined in `org-sort-entries-or-items'. Entries are applied in back to front order. Example: To sort first by TODO status, then by priority, then by date, then alphabetically (case-sensitive) use the following call: (org-sort-multi '(?d ?p ?t (t . ?a)))" (interactive) (dolist (x (nreverse sort-types)) (when (char-valid-p x) (setq x (cons nil x))) (condition-case nil (org-sort-entries (car x) (cdr x)) (error nil)))) ;; sort current level (defun lawlist-sort (&rest sort-types) "Sort the current org level. SORT-TYPES is a list where each entry is either a character or a cons pair (BOOL . CHAR), where BOOL is whether or not to sort case-sensitively, and CHAR is one of the characters defined in `org-sort-entries-or-items'. Entries are applied in back to front order. Defaults to \"?o ?p\" which is sorted by TODO status, then by priority" (interactive) (when (equal mode-name "Org") (let ((sort-types (or sort-types (if (or (org-entry-get nil "TODO") (org-entry-get nil "PRIORITY")) '(?d ?t ?p) ;; date, time, priority '((nil . ?a)))))) (save-excursion (outline-up-heading 1) (let ((start (point)) end) (while (and (not (bobp)) (not (eobp)) (<= (point) start)) (condition-case nil (outline-forward-same-level 1) (error (outline-up-heading 1)))) (unless (> (point) start) (goto-char (point-max))) (setq end (point)) (goto-char start) (apply 'org-sort-multi sort-types) (goto-char end) (when (eobp) (forward-line -1)) (when (looking-at "^\\s-*$") ;; (delete-line) ) (goto-char start) ;; (dotimes (x ) (org-cycle)) ))))) EDIT: Here is a more modern version of multi-sort, which is likely based upon further development of the above-code: (defun org-sort-all () (interactive) (save-excursion (goto-char (point-min)) (while (re-search-forward "^\* " nil t) (goto-char (match-beginning 0)) (condition-case err (progn (org-sort-entries t ?a) (org-sort-entries t ?p) (org-sort-entries t ?o) (forward-line)) (error nil))) (goto-char (point-min)) (while (re-search-forward "\* PROJECT " nil t) (goto-char (line-beginning-position)) (ignore-errors (org-sort-entries t ?a) (org-sort-entries t ?p) (org-sort-entries t ?o)) (forward-line)))) EDIT: The best option will be to fix sorting of deadlines (?d) so that undated todo are moved to the bottom of the outline, instead of mixed in with the dated todo. Here is an excerpt from the current org.el included within Emacs Trunk (as of July 1, 2013): (defun org-sort (with-case) "Call `org-sort-entries', `org-table-sort-lines' or `org-sort-list'. Optional argument WITH-CASE means sort case-sensitively." (interactive "P") (cond ((org-at-table-p) (org-call-with-arg 'org-table-sort-lines with-case)) ((org-at-item-p) (org-call-with-arg 'org-sort-list with-case)) (t (org-call-with-arg 'org-sort-entries with-case)))) (defun org-sort-remove-invisible (s) (remove-text-properties 0 (length s) org-rm-props s) (while (string-match org-bracket-link-regexp s) (setq s (replace-match (if (match-end 2) (match-string 3 s) (match-string 1 s)) t t s))) s) (defvar org-priority-regexp) ; defined later in the file (defvar org-after-sorting-entries-or-items-hook nil "Hook that is run after a bunch of entries or items have been sorted. When children are sorted, the cursor is in the parent line when this hook gets called. When a region or a plain list is sorted, the cursor will be in the first entry of the sorted region/list.") (defun org-sort-entries (&optional with-case sorting-type getkey-func compare-func property) "Sort entries on a certain level of an outline tree. If there is an active region, the entries in the region are sorted. Else, if the cursor is before the first entry, sort the top-level items. Else, the children of the entry at point are sorted. Sorting can be alphabetically, numerically, by date/time as given by a time stamp, by a property or by priority. The command prompts for the sorting type unless it has been given to the function through the SORTING-TYPE argument, which needs to be a character, \(?n ?N ?a ?A ?t ?T ?s ?S ?d ?D ?p ?P ?o ?O ?r ?R ?f ?F). Here is the precise meaning of each character: n Numerically, by converting the beginning of the entry/item to a number. a Alphabetically, ignoring the TODO keyword and the priority, if any. o By order of TODO keywords. t By date/time, either the first active time stamp in the entry, or, if none exist, by the first inactive one. s By the scheduled date/time. d By deadline date/time. c By creation time, which is assumed to be the first inactive time stamp at the beginning of a line. p By priority according to the cookie. r By the value of a property. Capital letters will reverse the sort order. If the SORTING-TYPE is ?f or ?F, then GETKEY-FUNC specifies a function to be called with point at the beginning of the record. It must return either a string or a number that should serve as the sorting key for that record. Comparing entries ignores case by default. However, with an optional argument WITH-CASE, the sorting considers case as well." (interactive "P") (let ((case-func (if with-case 'identity 'downcase)) (cmstr ;; The clock marker is lost when using `sort-subr', let's ;; store the clocking string. (when (equal (marker-buffer org-clock-marker) (current-buffer)) (save-excursion (goto-char org-clock-marker) (looking-back "^.*") (match-string-no-properties 0)))) start beg end stars re re2 txt what tmp) ;; Find beginning and end of region to sort (cond ((org-region-active-p) ;; we will sort the region (setq end (region-end) what "region") (goto-char (region-beginning)) (if (not (org-at-heading-p)) (outline-next-heading)) (setq start (point))) ((or (org-at-heading-p) (condition-case nil (progn (org-back-to-heading) t) (error nil))) ;; we will sort the children of the current headline (org-back-to-heading) (setq start (point) end (progn (org-end-of-subtree t t) (or (bolp) (insert "\n")) (org-back-over-empty-lines) (point)) what "children") (goto-char start) (show-subtree) (outline-next-heading)) (t ;; we will sort the top-level entries in this file (goto-char (point-min)) (or (org-at-heading-p) (outline-next-heading)) (setq start (point)) (goto-char (point-max)) (beginning-of-line 1) (when (looking-at ".*?\\S-") ;; File ends in a non-white line (end-of-line 1) (insert "\n")) (setq end (point-max)) (setq what "top-level") (goto-char start) (show-all))) (setq beg (point)) (if (>= beg end) (error "Nothing to sort")) (looking-at "\\(\\*+\\)") (setq stars (match-string 1) re (concat "^" (regexp-quote stars) " +") re2 (concat "^" (regexp-quote (substring stars 0 -1)) "[ \t\n]") txt (buffer-substring beg end)) (if (not (equal (substring txt -1) "\n")) (setq txt (concat txt "\n"))) (if (and (not (equal stars "*")) (string-match re2 txt)) (error "Region to sort contains a level above the first entry")) (unless sorting-type (message "Sort %s: [a]lpha [n]umeric [p]riority p[r]operty todo[o]rder [f]unc [t]ime [s]cheduled [d]eadline [c]reated A/N/P/R/O/F/T/S/D/C means reversed:" what) (setq sorting-type (read-char-exclusive)) (and (= (downcase sorting-type) ?f) (setq getkey-func (org-icompleting-read "Sort using function: " obarray 'fboundp t nil nil)) (setq getkey-func (intern getkey-func))) (and (= (downcase sorting-type) ?r) (setq property (org-icompleting-read "Property: " (mapcar 'list (org-buffer-property-keys t)) nil t)))) (message "Sorting entries...") (save-restriction (narrow-to-region start end) (let ((dcst (downcase sorting-type)) (case-fold-search nil) (now (current-time))) (sort-subr (/= dcst sorting-type) ;; This function moves to the beginning character of the "record" to ;; be sorted. (lambda nil (if (re-search-forward re nil t) (goto-char (match-beginning 0)) (goto-char (point-max)))) ;; This function moves to the last character of the "record" being ;; sorted. (lambda nil (save-match-data (condition-case nil (outline-forward-same-level 1) (error (goto-char (point-max)))))) ;; This function returns the value that gets sorted against. (lambda nil (cond ((= dcst ?n) (if (looking-at org-complex-heading-regexp) (string-to-number (match-string 4)) nil)) ((= dcst ?a) (if (looking-at org-complex-heading-regexp) (funcall case-func (match-string 4)) nil)) ((= dcst ?t) (let ((end (save-excursion (outline-next-heading) (point)))) (if (or (re-search-forward org-ts-regexp end t) (re-search-forward org-ts-regexp-both end t)) (org-time-string-to-seconds (match-string 0)) (org-float-time now)))) ((= dcst ?c) (let ((end (save-excursion (outline-next-heading) (point)))) (if (re-search-forward (concat "^[ \t]*\\[" org-ts-regexp1 "\\]") end t) (org-time-string-to-seconds (match-string 0)) (org-float-time now)))) ((= dcst ?s) (let ((end (save-excursion (outline-next-heading) (point)))) (if (re-search-forward org-scheduled-time-regexp end t) (org-time-string-to-seconds (match-string 1)) (org-float-time now)))) ((= dcst ?d) (let ((end (save-excursion (outline-next-heading) (point)))) (if (re-search-forward org-deadline-time-regexp end t) (org-time-string-to-seconds (match-string 1)) (org-float-time now)))) ((= dcst ?p) (if (re-search-forward org-priority-regexp (point-at-eol) t) (string-to-char (match-string 2)) org-default-priority)) ((= dcst ?r) (or (org-entry-get nil property) "")) ((= dcst ?o) (if (looking-at org-complex-heading-regexp) (- 9999 (length (member (match-string 2) org-todo-keywords-1))))) ((= dcst ?f) (if getkey-func (progn (setq tmp (funcall getkey-func)) (if (stringp tmp) (setq tmp (funcall case-func tmp))) tmp) (error "Invalid key function `%s'" getkey-func))) (t (error "Invalid sorting type `%c'" sorting-type)))) nil (cond ((= dcst ?a) 'string<) ((= dcst ?f) compare-func) ((member dcst '(?p ?t ?s ?d ?c)) '<))))) (run-hooks 'org-after-sorting-entries-or-items-hook) ;; Reset the clock marker if needed (when cmstr (save-excursion (goto-char start) (search-forward cmstr nil t) (move-marker org-clock-marker (point)))) (message "Sorting entries...done"))) (defun org-do-sort (table what &optional with-case sorting-type) "Sort TABLE of WHAT according to SORTING-TYPE. The user will be prompted for the SORTING-TYPE if the call to this function does not specify it. WHAT is only for the prompt, to indicate what is being sorted. The sorting key will be extracted from the car of the elements of the table. If WITH-CASE is non-nil, the sorting will be case-sensitive." (unless sorting-type (message "Sort %s: [a]lphabetic, [n]umeric, [t]ime. A/N/T means reversed:" what) (setq sorting-type (read-char-exclusive))) (let ((dcst (downcase sorting-type)) extractfun comparefun) ;; Define the appropriate functions (cond ((= dcst ?n) (setq extractfun 'string-to-number comparefun (if (= dcst sorting-type) '< '>))) ((= dcst ?a) (setq extractfun (if with-case (lambda(x) (org-sort-remove-invisible x)) (lambda(x) (downcase (org-sort-remove-invisible x)))) comparefun (if (= dcst sorting-type) 'string< (lambda (a b) (and (not (string< a b)) (not (string= a b))))))) ((= dcst ?t) (setq extractfun (lambda (x) (if (or (string-match org-ts-regexp x) (string-match org-ts-regexp-both x)) (org-float-time (org-time-string-to-time (match-string 0 x))) 0)) comparefun (if (= dcst sorting-type) '< '>))) (t (error "Invalid sorting type `%c'" sorting-type))) (sort (mapcar (lambda (x) (cons (funcall extractfun (car x)) (cdr x))) table) (lambda (a b) (funcall comparefun (car a) (car b))))))

    Read the article

  • Opscode Chef nginx compile from source issue reports successful run but does nothing

    - by v_abhi_v
    I am trying to install nginx from source in Opscode Chef and its bit weird, it runs complaining nothing but does not install it either. This is how my role attributes look like looks like "nginx":{ "default_site_enabled":false, "version":"1.2.6", "init_style":"init", "install_method":"source", "configure_flags":[ "--without-http_access_module", "--without-http_auth_basic_module", "--without-http_autoindex_module", "--without-http_browser_module", "--without-http_charset_module", "--without-http_fastcgi_module", "--without-http_memcached_module", "--without-http_referer_module", "--without-http_scgi_module", "--without-http_split_clients_module" ], "log_dir":"/var/log/nginx", "binary":"/opt/nginx/sbin/nginx", "source":{ "prefix":"/opt/nginx/dist", "modules":["http_ssl_module", "http_gzip_static_module" ] } }, The chef log shows: [2012-12-19T02:37:44+00:00] INFO: Processing bash[compile_nginx_source] action run (nginx::source line 82) [2012-12-19T02:37:45+00:00] INFO: bash[compile_nginx_source] ran successfully I am clueless on what's going on :(

    Read the article

  • rm failing inside cron script

    - by Nicholas
    I have a cron job calling a bash script which runs fine, except for one line inside it that is suppose to remove all fines in a directory. The result of this line is always 'no such file or directory' even though I have verified (many times) that there are files in that directory. The line in question is as simply: rm /dir1/dir2/dir3/* The script works fine when run manually in the terminal, so it must be something about how the cron is run. I've tried giving 'dir3' and all the files inside it every permission possible, so it shouldn't be a permission problem. (The directory and files are also owned by the user). I've tried specifing 'SHELL=/bin/bash' inside 'crontab'. There is no sticky bit set and there is no alias on the rm command. Interestingly changing the 'rm' command to 'ls' gives the same negative result (unless you remove the trailing '*', and then that works). What am I missing here?

    Read the article

  • Terminal issues on OS X with XAMPP and Yii framework

    - by Jake
    I'm trying to configure the Yii framework but am having problems with the terminal commands, and am also having difficulty setting up the webapp demo. I am using Mac OS X Snow Leopard and have installed XAMPP and placed the 'yii' folder in the xamppfiles \ htdocs folder. I have verified the http://localhost/yii/requirements/index.php which is working fine. I have tried the following but nothing seems to work so if anyone can point out what I'm doing wrong it would be very much appreciated. In fact any directory I search for is not recognized (see below) so I'm thinking I need to do something else for this to work but I have searched and searched but found no answer. ~ Jake$ /applications/xampp/xamppfiles/yii -bash: /applications/xampp/xamppfiles/yii: No such file or directory ~ Jake$ /documents -bash: /documents: No such file or directory

    Read the article

  • How to install wget on this?

    - by Winluser
    I did download RubyStack 2.0.3 for VMWare from http://bitnami.org/files/stacks/rubystack/2.0-3… but I cannot download anything on it! It appears that all basic utilities are missing/screwed: bitnami@linux:/var/tmp$ wget -bash: wget: command not found bitnami@linux:/var/tmp$ curl curl: error while loading shared libraries: libcurl.so.4: cannot open shared obj ect file: No such file or directory bitnami@linux:/var/tmp$ man wget -bash: man: command not found bitnami@linux:/var/tmp$ sudo apt-get install wget [sudo] password for bitnami: Reading package lists… Done Building dependency tree Reading state information… Done E: Couldn’t find package wget Any ideas how can I download anything on this machine? (I don't have physical access to it)

    Read the article

  • cron not even sending local mail to /var/mail/

    - by Yang
    I'm using a very plain Ubuntu Server 9.04, and cron isn't delivering any mail to my /var/mail/USER (the file hasn't even been created). Here's my full crontab: # m h dom mon dow command 15 * * * * $HOME/.cron/sync-bookmarks.bash If I add # m h dom mon dow command 15 * * * * $HOME/.cron/sync-bookmarks.bash >& /tmp/log then I see the stdout and stderr in /tmp/log. I'm not (yet) interested in actual remote email delivery, just local delivery to the mail spool file. Why isn't mail working? Thanks in advance for any tips.

    Read the article

  • Linux: Schedule command to run once after reboot (RunOnce equivalent)

    - by Christopher Parker
    I'd like to schedule a command to run after reboot on a Linux box. I know how to do this so the command consistently runs after every reboot with a @reboot crontab entry, however I only want the command to run once. After it runs, it should be removed from the queue of commands to run. I'm essentially looking for a Linux equivalent to RunOnce in the Windows world. In case it matters: $ uname -a Linux devbox 2.6.27.19-5-default #1 SMP 2009-02-28 04:40:21 +0100 x86_64 x86_64 x86_64 GNU/Linux $ bash --version GNU bash, version 3.2.48(1)-release (x86_64-suse-linux-gnu) Copyright (C) 2007 Free Software Foundation, Inc. $ cat /etc/SuSE-release SUSE Linux Enterprise Server 11 (x86_64) VERSION = 11 PATCHLEVEL = 0 Is there an easy, scriptable way to do this?

    Read the article

  • Loading dependencies for custom puppet functions

    - by Ben Smith
    I have written a custom puppet function, which is working fine, that depends on the cloudservers gem (a Rackspace client library). This is fine if I have pre-installed the gem on a server before running puppet but totally breaks if I have not installed the gem as the function seems to be run during the 'compilation' sweep, well before my package definition is realised. Here's what my .pp looks like, with get_hosts the function that requires the cloudservers gem. package { "rubygems": ensure => installed, provider => "gem"; } package { "cloudservers": ensure => installed, provider => "gem", require => Package["rubygems"]; } class hosts::us { $hosts = get_hosts("us") hostentry { $hosts: } } define hostentry() { $parts = split($name, ',') $address = $parts[0] $ip = $parts[1] $aliases = $parts[2] host{ $address: ip => $ip, host_aliases => $aliases } } Is there a way to stop the function getting run so early, or at least having it's run depend up the library being installed. Alternatively, is there a way that I can add dependencies somewhere in the functions folder that will be available to the function?

    Read the article

  • chroot'ing SSH home directories, shell problem.

    - by Hamza
    Hi folks, I am trying to chroot my SSH users to their home directories and it seems to work.. in a strange way. Here is what I have in my sshd_config: Match group restricthome ChrootDirectory %h The permissions on the user directories looks like this: drwxr-xr-x 2 root root 1024 May 11 13:45 [user]/ And I can see that the user logs in successfully: May 11 13:49:23 box sshd[5695]: Accepted password for [user] from x.x.x.x port 2358 ssh2 (with no error messages after this) But after entering the password the PuTTY window closes down. This is a wild guess, but could it be because the user's shell is set to /bin/bash and it can't execute because of the chroot? If so, could you give me pointers on how to fix it? Would simply copying the bash binary into user's home directory and modyfying the shell work? How would I deal with the dependencies, ldd shows quite a few of those :) Comments/suggestions will be appreciated. Thanks.

    Read the article

  • Gnu screen, how to update dynamically the title of a window?

    - by Fabio
    I googled a lot, but I can't find the answer I'm looking for... I'm trying to improve the aspect of GNU Screen using the screenrc file, I tuned colors, status line, caption and the list of the loaded windows. The only thing I'm not able to achieve is getting the caption with the current executed command as in this picture, note the vim caption in the right pane. What I currently have is this, and what I would like to obtain is having captions (and if possible also hardstatus line) with |0 less| 1 man instead of the current |0 bash| 1 bash. How to do this? Thanks in advance.

    Read the article

  • How to install software packages on a shared Red Hat Linux host account without root access or rpm?

    - by jeff
    I have a shared RHEL 4 host account where I do not have root privileges. I would like to install Git and Bash Complete in a way that they can be upgraded easily. To date, I've just been installing from source providing $HOME as a prefix to autoconf. Obviously this isn't ideal as I need to hunt down the files associated with the version I'm upgrading away from and delete them. I've tried using rpm but I just get -bash: rpm: command not found back so it's not available. I also looked into checkinstall but it looks like that requires rpm, dpkg, or Slackware's package manager to be available. Is there anything out there that can be used like a package manager without requiring root access or an existing package manager?

    Read the article

  • Permission denied install Joomla CiviCRM

    - by Tim
    Dear All, I am trying to install CiviCRM on a Joomla 1.5.17 web server running Ubuntu 9.10. Uploading the package to the tmp directory in /var/www/[site name]/tmp and installing creates this error: Warning: fopen(/var/www/trbcp/administrator/components/com_civicrm/civicrm/templates/CRM/common/civicrm.settings.php.tpl) [function.fopen]: failed to open stream: Permission denied in /var/www/trbcp/libraries/joomla/filesystem/file.php on line 240 Warning: fopen(/var/www/trbcp/administrator/components/com_civicrm/civicrm/templates/CRM/common/civicrm.settings.php.tpl) [function.fopen]: failed to open stream: Permission denied in /var/www/trbcp/libraries/joomla/filesystem/file.php on line 240 Warning: include_once(/var/www/trbcp/administrator/components/com_civicrm/civicrm.settings.php) [function.include-once]: failed to open stream: Permission denied in /var/www/trbcp/administrator/components/com_civicrm/configure.php on line 115 Warning: include_once() [function.include]: Failed opening '/var/www/trbcp/administrator/components/com_civicrm/civicrm.settings.php' for inclusion (include_path='.') in /var/www/trbcp/administrator/components/com_civicrm/configure.php on line 115 Warning: require_once(DB.php) [function.require-once]: failed to open stream: No such file or directory in /var/www/trbcp/administrator/components/com_civicrm/configure.php on line 140 Fatal error: require_once() [function.require]: Failed opening required 'DB.php' (include_path='.') in /var/www/trbcp/administrator/components/com_civicrm/configure.php on line 140 Initially I got a permissions denied error and thought that Joomla did not have permissions to all its directories but looking at Help-System information all the necessary directories are writable. I then decided to chmod 777 all the directories and try again but it still fails. Looking at the directories afterwards it seems that the new directories being created are not being created 777. By changing them I can get at least one step further before the error appears again. My question is does anyone know how to get round this? I am thinking that the new directories being created will require sudo privileges to have mv and create actions carried out, hence the permission denied errors. Can this be configured in Joomla? Or is there a way to specify that new directories created in /var/www/[site name] take 777 by default? any help greatly appreciated! EDIT: P.S. if anyone could give me a clue as to how the insert code feature works as well that would be great! Might make this post a bit more readable! EDIT2: Well I have had a bash at changing the permissions and ownership. sudo chown -R www-data:www-data /var/www/trbcp I then tried changing the whole /var directory (insecure I know but this is a test and dev server for me to find my feet on) to 777 and still getting permission errors. It seems to be error opening stream? Not a php guy so not sure what that is but could it be that permissions to run php script need to change? any thoughts greatly appreciated.

    Read the article

  • how to install mpgtx from source code

    - by Ahmet vardar
    i am new on linux server. i have mpgtx folder in my root, how can i install it ? in readme file it is written; ./configure && make when i type this i get permission denied error ? thanks EDIT: Here the steps i done root@server [/]# cd /mpgtx root@server [/mpgtx]# ./configure -bash: ./configure: Permission denied root@server [/mpgtx]# make ----------------------------------------------------------------------------- Hello ! I'm afraid I'm a dummy Makefile. My goal in life is to politely ask you to run the configure script to actual- ly generate a real Makefile. Would you be kind enough to type "./configure --help" to see the options that will suit your needs ? Please note that typing "./configure" without option will generate a Makefile that will suit most people needs. I wish you a good day. Please don't drive to fast. ----------------------------------------------------------------------------- root@server [/mpgtx]# ./configure -bash: ./configure: Permission denied root@server [/mpgtx]#

    Read the article

  • Why are all Linux commands broken after installing Perl?

    - by user115079
    I installed perl using following command: curl -L http://xrl.us/installperlnix | bash after that i run following command to create soft link ln -sf /usr/local/bin/perl /usr/bin/perl now I'm trying to run commands like dir, mkdir, ll, rm, vi but nothing seems to be working for me. also when i try to login into my shell i get following msg at startup: Last login: Wed Apr 4 21:50:12 2012 from x.y.z.ip -bash: perl: command not found please help. Here is system detail: cat /proc/version Linux version 2.6.18-274.18.1.el5.028stab098.1 (root@rhel5-build-x64) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 SMP Sat Feb 11 15:30:41 MSK 2012 cat /etc/issue CentOS 5.7 32 bit Kernel \r on an \m Don't know if perl was already installed or not. and now i can't check.

    Read the article

  • Allow user to execute a shell script without seeing its contents?

    - by Autopulated
    I'd like to have an hg hook that sends email using a gmail account. Obviously I don't want anyone to be able read the email-sending script except me or root, since it has a password in, so here's what I've tried: -rwsr-xr-x 1 james james 58 Feb 18 12:05 incoming.email.sh -rwx--x--x 1 james james 262 Feb 18 12:04 send-incoming-email.sh where incoming.email.sh is the file executed as the hook: #! /bin/bash /path/to/send-incoming-email.sh However, when I try to run as another user I get the error: /bin/bash: /path/to/send-incoming-email.sh: Permission denied The send-incoming-email.sh file works fine when I run as myself. Is what I'm trying to do possible, or will setuid not propagate to commands executed from a shell script? System is Ubuntu 10.04.2 LTS.

    Read the article

  • Strange strace and setuid behaviour: permission denied under strace, but not running normally.

    - by Autopulated
    This is related to this question. I have a script (fix-permissions.sh) that fixes some file permissions: #! /bin/bash sudo chown -R person:group /path/ sudo chmod -R g+rw /path/ And a small c program to run this, which is setuided: #include "sys/types.h" #include "unistd.h" int main(){ setuid(geteuid()); return system("/path/fix-permissions.sh"); } Directory: -rwsr-xr-x 1 root root 7228 Feb 19 17:33 fix-permissions -rwx--x--x 1 root root 112 Feb 19 13:38 fix-permissions.sh If I do this, everything seems fine, and the permissions do get correctly fixed: james $ sudo su someone-else someone-else $ ./fix-permissions but if I use strace, I get: someone-else $ strace ./fix-permissions /bin/bash: /path/fix-permissions.sh: Permission denied It's interesting to note that I get the same permission denied error with an identical setup (permissions, c program), but a different script, even when not using strace. Is this some kind of heureustic magic behaviour in setuid that I'm uncovering? How should I figure out what's going on? System is Ubuntu 10.04.2 LTS, Linux 2.6.32.26-kvm-i386-20101122 #1 SMP

    Read the article

  • Correct password for ssh key rejected when ssh-d into machine

    - by user20342
    When I am logged into my machine directly, I can do all git operations, and when prompted for a password, the password is accepted. When I ssh into the same box and run git operations on the same repos, the password is rejected. Relevant section of .ssh/config looks like this: # Generic settings Host * ServerAliveInterval 600 ControlPath /tmp/ssh-%r@%h:%p ControlMaster auto KeepAlive yes IdentityFile ~/.ssh/id_rsa.pub Transaction looks like this when I login when I ssh into my box: {12-12-03 9:41}hbrown-wks2:~/workspace/spt/project@master??? hbrown% git pull Enter passphrase for key '/home/hbrown/.ssh/id_rsa.pub': Enter passphrase for key '/home/hbrown/.ssh/id_rsa.pub': Enter passphrase for key '/home/hbrown/.ssh/id_rsa.pub': Permission denied (publickey). fatal: Could not read from remote repository. Please make sure you have the correct access rights and the repository exists. Using bash does not appear to make a difference (i.e. ssh-agent /bin/bash). This is a recent development, but I can't cite the change that caused it.

    Read the article

  • for ps aux what are Ss Sl Ssl proccess types UNIX

    - by JiminyCricket
    when doing a "ps aux" command I get some process listed as Ss, Ssl and Sl what do these mean? root 24653 0.0 0.0 2256 8 ? Ss Apr12 0:00 /bin/bash -c /usr/bin/python /var/python/report_watchman.py root 24654 0.0 0.0 74412 88 ? Sl Apr12 0:01 /usr/bin/python /var/python/report_watchman.py root 21976 0.0 0.0 2256 8 ? Ss Apr14 0:00 /bin/bash -c /usr/bin/python /var/python/report_watchman.py root 21977 0.0 0.0 73628 88 ? Sl Apr14 0:01 /usr/bin/python /var/python/report_watchman.py

    Read the article

  • Configure Supervisor to manage init.d services

    - by Eduard Luca
    I installed uwsgi and created a bash script, which allows me to start/stop uwsgi in the following manner: service uwsgi [start|stop]. This bash script is located in /etc/init.d/uwsgi. Now, I want to (politely) ask Supervisor to use that script to manage the uwsgi process. All the tutorials indicate that this is not the way to do it, however I do want to be able to do both service uwsgi stop and supervisorctl stop uwsgi (not sure if I nailed the syntax of the latter) -- even though I am aware that the first one will not in fact stop my service because supervisor will restart it (that's exactly what I need). Note that I'm using uwsgi in emperor mode if that matters in any way.

    Read the article

  • Suppress EXT3-fs warning on mount

    - by STM
    I am familiar with output suppress on Unix machines, ie: cat /file/that/doesnt/exist > /dev/null 2>& However I can't seem to suppress the output of mount when an ext3 filesystem is mounted for the nth time, and it recommends an fsck. As it happens, fscks are run regularly by another machine, so these warning messages are needlessly interrupting the flow of output to my pretty bash script. These are the errors: # mount -t ext3 /dev/sda1 /mnt > /dev/null 2>& kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,1), internal journal EXT3-fs: mounted filesystem with ordered data mode. Can anyone shed some light on this? I'm clearly blocking both fd's, but somehow output is still getting through. This is GNU Bash v2.05a

    Read the article

  • Directory Not Found Error

    - by noobguy
    I am trying to verify tails and when I get to the command prompt portion of the verification some difficulties seem to have arose. Below is the script: noob@noob-System-Product-Name:~$ cd [/media/noob/UUI] bash: cd: [/media/noob/UUI]: No such file or directory noob@noob-System-Product-Name:~$ gpg --keyid-format long --import tails-signing.key gpg: can't open `tails-signing.key': No such file or directory gpg: Total number processed: 0 Same thing happens when I try from download directory; noob@noob-System-Product-Name:~$ cd [/home/noob/Downloads] bash: cd: [/home/noob/Downloads]: No such file or directory noob@noob-System-Product-Name:~$ gpg --keyid-format long --import tails-signing.key gpg: can't open `tails-signing.key': No such file or directory gpg: Total number processed: 0 Any suggestions would be greatly appreciated.

    Read the article

< Previous Page | 372 373 374 375 376 377 378 379 380 381 382 383  | Next Page >