Search Results

Search found 19699 results on 788 pages for 'touch screen'.

Page 376/788 | < Previous Page | 372 373 374 375 376 377 378 379 380 381 382 383  | Next Page >

  • can't properly shutdown ubuntu and sound problem on HP mini 311 netbook

    - by Viele
    hi, I recently bought a HP mini 311 netbook. I replaced its harddrive and installed ubuntu 10.04. Since then, I have encountered some very strange problem with its sound and shutdown/reboot. At times, when I start the computer, it will have no sound, on the GUI the sound is at max, but no sound is available. This sometimes also happen after after upgrades, hibernate, and toggling the wireless radio button. Strangely, when the sound is out the device will also refuse to be shutdown. If I shutdown the computer using the GUI, it will simply go back to the log in screen without actually shutting down. If I use "sudo shutdown 0", the computer will hang on the loading screen of the shut down process. I had to force the pc to shutdown by holding the power button down. usually (probably always) after I force a turn-off then start off again. the sound and shutdown become normal. I wonder if anyone have clues regarding to the cause of this problem. This the info about the computer: 1) installed ubuntu 10.04LTS RC, later upgraded to formal released version. 2) cat /proc/asound/version == "Advanced Linux Sound Architecture Driver Version 1.0.21." however, when doing 'alsaconf' the version displayed is 1.0.23 any help is appreciated. Thanks

    Read the article

  • Install self-signed certificate on local server (iis)

    - by ile
    On this page there are instructions on how to create self-signed cert (on apache) and how to install this certificate on server. I found this page (http://www.visualwin.com/SelfSSL/) with instructions on how to create self-signed certificate on windows (iis). I followed instructions and when I type https://myip/myapp (this leads to localhost because I set my router's port forwarding to go to localhost on my pc) this part works. From the first link, the most important part is this: What needs to be installed in IE is actually the Root CA Certificate. In the how-to above, the Root CA Certificate is called ca.crt. Copy this file to the server that is running QuickBooks. The following is for IE6: - Open IE - Tools - Internet Options - Content - Certificates - Trusted Root Certification Authorities Tab - Import, Next, Browse to 'ca.crt' - Next, Next, Finish, Close, OK The part that is missing in second link is that there is no instruction on how to get .crt file, so I tried to get it myself. What I did was following: I opened https://myip/myapp in Firefox and then "This Connection is Untrusted" screen appeared. Then I clicked on "Add Exception" and then below "Certificate Status" I clicked "View". Under the Details tab I clicked on Export and choosed Save as type: "X 509 Certificate (PEM)" and file was saved with .crt extension. Then I opened IE8 and followed above instructions. After opening https://myip/myapp in IE8 I always get warning screen. Does anyone knows what am I doing wrong? Thanks, Ile

    Read the article

  • ASUS M51SE freezes for no apparent reason

    - by Piotr Justyna
    First of all, it's my first question on superuser so please excuse me if it doesn't belong here, a similar one has already been posted here or if I missed some details. My ASUS M51 freezes up. It all started a couple of months ago and I basically forgot about it since I bought a new laptop around that time. This is, however, bugging me since then and I can't explain why it's happening. Let me quickly describe what's wrong. When switched on and running (win 7) it freezes after a couple of minutes of normal usage (or even if I don't actually do anything). By 'freezes', I mean it's like a static image of my desktop was being displayed on the screen. Nothing happens, alt+ctrl+del doesn't help, I basically have to switch it off using a power button. I tried to remove the hard drive and to start the laptop without it. The same here - it freezes on the the initial black loading screen (a couple of minutes after the computer says it can't find the hdd) I tried to remove RAM - the same thing. All fans are spinning as they should. I cleaned the fans using a small paintbrush but it doesn't change anything. The laptop is generally clean and in pretty good physical shape. Well, almost, obviously :). One possible clue I can think of is that the laptop is heating excessively even when it doesn't actually do anything (hdd removed). Do you have any ideas what is the cause of this or what else can I try? Thanks, Piotr

    Read the article

  • MS SQL dts to ssis migration error

    - by Manjot
    Hi, I have migrated some DTS packages to SSIS 2005 using "Migration" wizard. When I tried to run it, it fails saying you need a higher version of SSIS even though the destination SSIS server is on 9.0.4211 level. then I digged in the package using business intelligence studio and saw that one of the package subtasks is "Transform data task" (the dts version) and the package fails to run that. The storage location for this dts task is set to "Embedded in Task". I didn't touch it. why didn't it convert this task to an SSIS data flow task? any help please? Thansk in advance

    Read the article

  • How do I configure a new (non-OS) raid device under Windows 7?

    - by GregH
    I recently installed 3 new 1TB drives in my Windows 7 (64 bit) system. These are in addition to the 10k rpm disk that I already have running the Windows 7 OS. My intent is to create a RAID 5 volume with the 3 disks. I don't seem to have a problem configuring the bios and creating the resulting 1.9 TB RAID volume. I run in to the problem when I try booting in to Windows. I get a quick flash of a blue screen and then am prompted by windows to do a repair. It tries to repair and then reboots. This sequence lasts indefinitely. If I re-configure the bios back to non-RAID (ACHI) then windows boots fine. The strange thing is that the 1.9 TB volume I configured through the bios actually shows up in windows! Strange since the motherboard is not set up with RAID. I assume that I somehow have to install the RAID drivers from the mobo manufacturer. How do I do this? Is the reason I'm getting the blue screen a result of not having the RAID drivers installed? It's strange because I can find plenty of documentation on how to set up RAID and do a fresh install Windows on to the RAID device, but nothing on how to set up a RAID device on an already running system. Advice is appreciated.

    Read the article

  • Can't create a valid symlink under VMWare HGFS

    - by Alexander Gladysh
    Host: OS X 10.6.5 VMWare Fusion: 3.1.2 Guest: Ubuntu x86 10.10 $ uname -a Linux ubuntu 2.6.35-24-generic #42-Ubuntu SMP Thu Dec 2 01:41:57 UTC 2010 i686 GNU/Linux I can not create a symlink, readable from the Guest OS anywhere in the directory, mounted with hgfs: /mnt/hgfs/projects/tmp$ touch aaa /mnt/hgfs/projects/tmp$ ln -s aaa bbb /mnt/hgfs/projects/tmp$ less bbb bbb: No such file or directory /mnt/hgfs/projects/tmp$ ls -la total 6 drwxr-xr-x 1 501 users 136 2010-12-28 18:12 . drwxr-xr-x 1 501 users 8602 2010-12-28 18:12 .. -rw-r--r-- 1 501 users 0 2010-12-28 18:12 aaa lrwxr-xr-x 1 501 users 3 2010-12-28 18:12 bbb - aaa /mnt/hgfs/projects/tmp$ readlink bbb aaa The same symlink is perfectly accessible in OS X host. Is there a workaround for this?

    Read the article

  • ^C not working in zsh on Mac OSX

    - by Vitaly Kushner
    Ctrl-C stopped working for me at the terminal when using zsh (on mac osx). I didn't notice the exact moment that it happend so I can't be sure what caused it. I didd't update zsh in a while though. and didn't touch .zshrc (I have it at a repo http://github.com/astrails/dotzsh) If I run bash, ^C works in it. If I run any command, like cat, ^C will work to stop it too. but inside zsh it just doesn't do anything. bindkey | grep \\^C gives "^B"-"^C" self-insert zsh 4.3.10 (i386-apple-darwin10.4.3), installed though ports (zsh-devel @4.3.10_0+doc+examples+mp_completion+pcre) mac os 10.6.6

    Read the article

  • Selective Pointer device remapping in linux

    - by user6368
    I just got an HP 2710p (hp tablet, with digitizer), and I've played around with linux for a while now, and thought I would go ahead and install it. Everything works fine, excepting normal tablet functions, which is to be expected. I'm working on the screen rotation, and there are on-screen keyboards, etc, but I'm having issues with the stylus. I can tap and left click with the stylus as normal, but the side button (which in windows functions as a right mouse button) appears as a 'button 2' to xev (a middle/scroll wheel button). I can switch 'button 2' and 'button 3' universally using xmodmap, but I'd like to do so exclusively for stylus so I don't screw up regular pointing devices. Altering xorg.conf (which is surprisingly bare) with the recommended sections (adding sections for each of the stylus buttons) does nothing. I'm running crunchbang, which is an ubuntu/debian varient with openbox as the windows manager. Thanks Also, as a seperate note, does anybody know how to detect when I rotate and/or latch the lid shut? I was thinking maybe I could run a script to switch the buttons when I close it, but I can't find any information.

    Read the article

  • Ubuntu root privs installation issue

    - by Pam
    I am a fairly new Ubuntu user (and Linux user, for that matter) and I just downloaded a program whose installer was a .sh file. Not thinking, I copied the installer to an /opt subdirectory, thinking that I was going to install the application there: sudo cp ~/Downloads/fooInstaller.sh /opt/someDir I can't remember, but I either had to use sudo because /opt required it, or I just used it without thinking, but in any case, I prefixed with sudo. Once in /opt/someDir, I executed the installer again, using sudo: sudo sh fooInstaller.sh The terminal went crazy, and a few seconds later, a graphical install wizard popped up that guided me through the rest of the process. At the end of the wizard I was prompted to launch the program, and I did, and everything was great. Until... I closed the program, and attempted to add it to my Ubuntu "panel" (the icon panel at the top of the screen). The program was installed to /usr/local/foo/theProgram, and so I specified that URL as the command in the custom app launcher. When I open the program through the panel/launcher (at the top of the screen), the program doesn't load or operate correctly. I get a lot of error messages complaining about being denied permissions. I'm assuming that this is a "superuser/installation/privs" issue, and not a problem with the application (hence this post at superuser.com instead of the application's forums), because when I launch the program from the terminal with sudo, it opens and executes perfectly fine, just like it did the first time around after the install wizard finished. I realize I'm probably going to have to uninstall the program completely, and re-install it differently. Finally, my question: After uninstalling, can I avoid all these issue by just running the installer (sh fooInstaller.sh) right out of my Downloads directory, sans the sudo prefix? If not, how do I get the program to install without root privs so that I can add it to my panel/launcher and get it executing correctly? Sorry for the long post but I didn't want to omit any details because, as I'm sure you can tell, I'm not really sure I know what I'm doing. Thanks for any help here!

    Read the article

  • VMWare Guest Info - Wrong IP Returned

    - by Jon Bailey
    We're running a VDI environment with vSphere 4.0 and Oracle VDI 3.2.2 and are having a bit of a problem with users that connect to an IPSec VPN from within their VM. For some reason, once connected to the VPN, the VMWare API returns GuestInfo.ipAddress as the VPN IP rather than the primary IP of the only NIC on the system. The IP address shown in net[0].ipAddress is the correct address and is what vSphere client is reporting. Is there any way to get VMWare tools to report the net[0].ipAddress as GuestInfo.ipAddress? Below is sample output from the guestinfo.pl script. 172.16.1.2 is the example "bad" VPN address that our VDI software is seeing. VMXFLEX01 guestFamily: windowsGuest VMXFLEX01 guestFullName: Microsoft Windows XP Professional (32-bit) VMXFLEX01 guestId: winXPProGuest VMXFLEX01 guestState: running VMXFLEX01 hostName: VMXFLEX01 VMXFLEX01 ipAddress: 172.16.1.2 VMXFLEX01 toolsStatus: VMware Tools is running and the version is current. VMXFLEX01 toolsVersion: 8194 VMXFLEX01 Screen - Height: 600 VMXFLEX01 Screen - Width: 800 VMXFLEX01 Disk[0]: Capacity 42935926784 VMXFLEX01 Disk[0]: Path : C:\ VMXFLEX01 Disk[0]: freespace : 33272619008 VMXFLEX01 net[0] - connected : 1 VMXFLEX01 net[0] - deviceConfigId : 4000 VMXFLEX01 net[0] - macAddress : 00:50:56:95:1f:c9 VMXFLEX01 net[0] - network : VM Network VMXFLEX01 net[0] - ipAddress : 10.0.0.2

    Read the article

  • The best LCD monitors for reading text?

    - by Xeoncross
    I have been using an 19" Acer AL1916A B for several years now. While possibly failing in other areas - the text was incredibly sharp. Which is very important for someone like me that spends all day writing code. My eyes are very finely tuned and I can see refresh rates and even the smallest pixel overflows from anti-aliasing. Unfortunately it finally died. I then tried a 19" widescreen Acer X193w+ and found that the text was much less sharp. I also tried a 19" widescreen Samsung 920nw and was also disappointed. (by the way, widescreen is a great invention for companies - the same price for less screen!). I am looking for a couple of options of LCD's that hands-down render text ultra sharp and clear. This isn't subjective - an LCD either has sharp text or it doesn't. Anyone with delicate eyes can see the difference and knows what I'm talking about. Please also bare in mind that you're vision can adjust to a given screen; rendering your judgment biased if you do not constantly use other monitors also. If you use windows with ClearType enabled please do not reply.

    Read the article

  • VMware Fusion won't boot my Boot Camp partition

    - by Sean
    I have a Boot Camp partition on my MacBook that I would ultimately like to convert to a VMware virtual machine image. I've installed VMware Fusion and tried to start up my Boot Camp install using the Boot Camp button on the initial welcome screen. It brings up the "VMware Fusion is preparing your Boot Camp partition to run as a virtual machine" dialog, but afterward it shows an error dialog with the following message: Boot Camp partition preprocessing failed. You may not be able to boot your Boot Camp partition as a virtual machine. It then tries to boot the new VM, but it blue screens during the boot process. The info on the blue screen doesn't provide much in the way of help though. Running chkdsk has no effect. After searching around, some people recommended using VMware's stand-alone converter utility from within Windows to create an image, but the utility said it couldn't create an image because my disk uses a GUID Partition Table (GPT). I'm wondering if this is why it can't boot my BC partition from Fusion. Has anyone else run into this and found a fix?

    Read the article

  • Bare-metal virtualisation for the desktop

    - by Andrew Taylor
    Hi, Does anyone have any knowledge about bare-metal virtualisation products? I'm interested in building a new desktop machine for home, I've been looking at the Intel Quad Core processors and I'd like to put 8GB of RAM in there, but, it got me thinking about making the most out of the available resources. I thought if I could get a good 64bit machine, put some bare-metal virtualisation on, then have a primary system, I'd also be able to bring up some extra virtualised systems as and when I needed. I know most of the bare metal systems are designed for the server market, but, is there anything out there that works well for a desktop. What are the caveats? I presume I won't be able to make the most out of any video cards I could buy, what about just getting a decent screen resolution, will this be a problem? I run a single 24" screen. What about DVD/CD writing, is this possible? I'd like to re-rip my CD collection, I was hoping the quad 64Bit goodness would help me out with the encoding. I currently use a Mac and couldn't go back to windows so that leaves Linux, I was thinking a primary OS of ubuntu. Does this make a difference? Thanks Andrew

    Read the article

  • No LPT port in Windows 7 virtual machines

    - by KeyboardMonkey
    Windows 7 has MS virtual PC integrated, the VM settings don't give a parallel LPT port mapping to the physical machine. Where did it go? Has anyone else noticed this, and found a solution? Update: After much digging, I found the one and only reference to this issue, on the VPC Blog: "Parallel port devices are not supported, as they are relatively rare today." -More details- It's a XP VM I've been using since VPC 2007 days, which did have this functionality. This is to configure barcode printers via the LPT port. Since the (new) MS VM can't map to my physical LPT port, I'm having a hard time configuring printers. My physical ports are enabled in the BIOS. It has worked the past 3 years, before switching to Win 7. Any help is appreciated. This screen shot of the VM settings shows COM ports, but LPT is no more In contrast, here is a screen shot of VPC 2007 (before it got integrated into Win 7). Notice how it has LPT support

    Read the article

  • Misconfigured external monitor on Mac OS X Snow Leopard 10.6.3

    - by Mike
    I have an external monitor (specifically, an HDTV) hooked up to my 2.53GHz 13" macbook pro. This display works fine and I use it with my mac in clamshell mode (eg. with an external keyboard/mouse and the laptop closed and the built-in mac screen turned off) My Mac has multiple users on it. For User A I can use the mac with the external monitor in both clamshell and dual-monitor setups. For User B, I can use the monitor in a dual-monitor setup, but whenever I switch to clamshell mode the Mac switches to an incorrect output resolution or frequency setting that my HDTV doesn't recognize, resulting in a blank screen and a message about Unsupported Resolution. Chances are I did this to myself by misconfiguring my display settings at some point in the past, but I have no idea how to undo it. I (obviously) can't seen the display to change the settings when it's borked. I can see the display settings if I switch to Dual-monitor mode, but those settings only affect the dual monitor setup; no matter how I change the settings in dual-monitor mode, the clamshell mode setup remains borked. How can I dig myself out of this hole?

    Read the article

  • Nvidia Linux Driver Huge Resolution

    - by darxsys
    I'm trying to setup a working CUDA SDK on my Linux Mint. I'm new to Linux and everything connected with it. So, I tried following some steps on how to install CUDA. Firstly, I downloaded a Linux driver from here: http://developer.nvidia.com/cuda/cuda-downloads version 295.41. After that, I barely found a way to run it. I did it like this: 1. typed in sudo init 1 in terminal and switched to root 2. typed service mdm stop 3. ran the *.run file downloaded from the link above Then it started installing the driver. It gave some warning messages, but I ignored it. After installation, I typed init 5 and it came back to GUI screen, BUT everything is huge. I restarted, still huge. My screen resolution is 640x480 on a 17 inch laptop monitor. I tried running Nvidia X Server Settings, but it says: "You do not appear to be using Nvidia X Driver. Please edit your X configuration file." I tried that. Nothing happened. I cant change the resolution because that Nvidia Settings thing gives no options. Then I googled some things, installing some packages - nothing. The biggest problem is I don't understand whats really going on. My laptop is a Samsung with i7 and Nvidia Gt 650M with optimus. I cant even install bumblebee, but that is something I will try if I manage to get my resolution to default. Please, help!

    Read the article

  • How can I run Gnome or KDE locally in Cygwin?

    - by John Peter Thompson Garcés
    Apparently it is possible to do this using cygwin ports, as can be seen in screenshots. I followed this how-to to get apt-cygports set up, and I used it to install gnome-session. This how-to supposedly gives the commands needed to run Gnome or KDE, but whenever I try to run Gnome, a blank X-window pops up and then quickly disappears. Here is the terminal output: $ startx /usr/bin/dbus-launch gnome-session xauth: file /home/jpthomps/.serverauth.4168 does not exist Welcome to the XWin X Server Vendor: The Cygwin/X Project Release: 1.10.3.0 OS: Windows 7 Service Pack 1 [Windows NT 6.1 build 7601] (WoW64) Package: version 1.10.3-12 built 2011-08-22 XWin was started with the following command line: /usr/bin/X :0 -auth /home/jpthomps/.serverauth.4168 (II) xorg.conf is not supported (II) See http://x.cygwin.com/docs/faq/cygwin-x-faq.html for more information LoadPreferences: /home/jpthomps/.XWinrc not found LoadPreferences: Loading /etc/X11/system.XWinrc LoadPreferences: Done parsing the configuration file... winDetectSupportedEngines - DirectDraw installed, allowing ShadowDD winDetectSupportedEngines - Windows NT, allowing PrimaryDD winDetectSupportedEngines - DirectDraw4 installed, allowing ShadowDDNL winDetectSupportedEngines - Returning, supported engines 0000001f winSetEngine - Using Shadow DirectDraw NonLocking winScreenInit - Using Windows display depth of 32 bits per pixel winFinishScreenInitFB - Masks: 00ff0000 0000ff00 000000ff Screen 0 added at virtual desktop coordinate (0,0). MIT-SHM extension disabled due to lack of kernel support XFree86-Bigfont extension local-client optimization disabled due to lack of shared memory support in the kernel (II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so (II) GLX: Initialized DRISWRAST GL provider for screen 0 winPointerWarpCursor - Discarding first warp: 637 478 (--) 5 mouse buttons found (--) Setting autorepeat to delay=500, rate=31 (--) Windows keyboard layout: "00000409" (00000409) "US", type 4 (--) Found matching XKB configuration "English (USA)" (--) Model = "pc105" Layout = "us" Variant = "none" Options = "none" Rules = "base" Model = "pc105" Layout = "us" Variant = "none" Options = "none" winBlockHandler - pthread_mutex_unlock() winProcEstablishConnection - winInitClipboard returned. winClipboardProc - DISPLAY=:0.0 winClipboardProc - XOpenDisplay () returned and successfully opened the display. xinit: XFree86_VT property unexpectedly has 0 items instead of 1 xinit: connection to X server lost waiting for X server to shut down winClipboardProc - winClipboardFlushWindowsMessageQueue trapped WM_QUIT message, exiting main loop. winClipboardProc - XDestroyWindow succeeded. winClipboardProc - Clipboard disabled - Exit from server winDeinitMultiWindowWM - Noting shutdown in progress

    Read the article

  • Windows Virtual Machines will not run

    - by jlego
    I'm trying to setup a few virtual machines to use for testing websites in the various old versions of IE. I had Microsoft Virtual PC working on an older machine using XP mode and 2 other VHD's from Microsoft that allowed me to test in IE6-IE8. I've recently gotten a new work machine and am trying to set up the VMs again for testing, however nothing seems to be working. Both the old and the new system run Windows 7 64-bit Ultimate with AMD processors. I downloaded Virtual PC & XP mode from here http://www.microsoft.com/windows/virtual-pc/download.aspx and go through the installation process. XP mode is installed, but when I try to run it it goes through the initial setup process only to fail when it is almost complete with the error "Cannot Complete Setup". (After googling I see that this might be a conflict with my processor) I download other VHD's from here http://www.microsoft.com/windows/virtual-pc/download.aspx in order to get the other versions of IE and try to set those up in Virtual PC as well. I click on them to start the machine and both Windows 7 with IE8 and Windows Vista with IE7 just hang at a black screen. I try to use Virtual Box instead, and I get Windows XP with IE6 running, but I have no internet connection in the VM. I try all different settings and try to google the correct settings but nothing seems to work. When I load the VM, XP shows that its found new hardware but it needs the drivers. One of these pieces of hardware is the network adapter, but I can't connect to the internet to download the driver in the guest OS. VirtualBox tells me I need to install extensions in order for things to function properly. I go through the installation process in the guest OS and restart the VM, however now XP is asking for validation and I can't access the VM. I try installing the other 2 OS (Vista & 7) but I get a BSOD right after the startup screen appears and the VM restarts itself. I'm getting so frustrated trying to make this work, I would really appreciate any assistance on getting the VMs up and running or any alternatives for testing websites in Internet Explorer.

    Read the article

  • How do I enable in-place tablet pc input panel for non tablet PCs?

    - by yngvedh
    Hi all, Is it possible to enable the in-place tablet PC input panel on a non-tablet PC? I have checked the "For tablet pen input, show the Input Panel icon next to the text entry area when possible" checkbox in the options of the Input Panel. Does this not work because pen input is something different than mouse input? I do have a touch screen, but it just emulates a mouse (moving the cursor, pressing the left mouse button and such). I can get the Input Panel to show manually by starting tabtip.exe and then event the ink works, but I cannot get it to show (itself or it's in-place icon) when I activate text input controls. Does anyone know what's up?

    Read the article

  • How to install windows 7 from scratch on a disk which already contains partitions

    - by rangalo
    Hi, I have following partitions on a 1 TB disk. 14 GB UNKNOWN recovery partition 100MB NTFS System Reserved partition for Windows 7 448GB NTFS Windows 7 system partition 468GB NTFS Data partition for windows 7 Now because of the problems mentioned in my other question here I got a brand new windows 7 cd and want to install it from scratch after deleting all the extra partitions. But windows 7 installation doesn't give me such options. It refuses to touch the 14GB Recovery and 100 MB (reserved by previous windows 7) partition. Any ideas ? Note: Because of it is a dynamic disks most of the freely available tools refuse to delete the partitions on the disk. regards.

    Read the article

  • Why do most songs in my media collection play twice? - Corrupt media?

    - by Dean
    Problem: Whether I'm playing the media with Rhythmbox on Ubuntu, Winamp on Windows, or my Nokia N95's media player, most of my audio files (OK, maybe only 40%) play twice. Info: I have a 500GB external 2.5" WD HDD, with a 150GB primary FAT32 partition labeled MUSIC. Inside this, I have about 500 folders containing about 10,000 MP3/WMA/M4A/WAV files. I manage the drive using Ubuntu 9.10, and frequently copy data to/from it using RSYNC, or on windows, TotalCopy. The visual output is different in each media player, but it behaves as if the 1 MP3 has the same song on it twice, and as soon as it ends it begins again. Winamp shows that the song goes for 2x as long as it should, The N95's media player shows the progress bar off the right-hand-side of the screen when it begins playing (then jumps back to the left, then continues along...). Rhythmbox doesn't show me how long the song is, nor does the progress bar move along the screen. Plea: It seams to me somewhere along the lines my collection has become corrupt... but where? And how? and please someone tell me I can fix it!! TIA, Dean.

    Read the article

  • SharePoint 2010 Licensing Costs

    - by akil.franklin
    We will be implementing a public-facing website in SharePoint 2010 and I have a few questions regarding licensing: Is there any (relatively) reliable pricing information available for SharePoint 2010? What about rumors? What edition of SharePoint 2010 would be appropriate for a publicly facing website (in 2007, you needed Enterprise for this, but it seems that WCM functionality is included in Standard in 2010)? What would be a reasonable number to budget for SharePoint 2010 licensing for a publicly facing website? Note: I have tried asking Microsoft directly. Unless you are a volume license customer, they direct you to a reseller (like CDW). Unfortunately, none of the resellers have the pricing for 2010 yet. The sku isn't even in their system. I was able to get in touch with the Microsoft Pre-Sales team and they confirmed that the price list will for 2010 will be published on May 3rd (or thereabouts), but they weren't able to give me a price. Thanks in advance for your help!

    Read the article

  • Sharing Internet Connection using an ad-hoc wifi network

    - by Apps
    I've installed a WiFi Adapter in my Windows XP PC and created an ad-hoc network. I am able to connect to the network through my iPod Touch. On the same PC I have a LAN connection to the Internet. I need to share this internet connection to my iPod too. The problem is Windows did not assign an IP Address (even though assign IP address automatically is selected) to this WiFi network. When I tried to share the Internet connection, I got a message that LAN Network Adapter's IP address will be changed to 192.168.1.1. But if this happens I will not be able to connect to other devices/servers in my LAN Network. How do I share the Internet connection through WiFi?

    Read the article

  • Alias using Nginx causing phpMyAdmin login endless loop

    - by Seb Dangerfield
    Recently I've been trying to set up a web server using Nginx (I normally use Apache). However I've ran into a problem trying to set phpMyAdmin up on an alias. The alias correctly takes you too the phpMyAdmin login screen, however when you enter valid credentials and hit go you end up back on the login screen with no errors. Sounded like a cookie or session problem to me... but if I symlink the phpMyAdmin directory and try logging in through the symlinked version it works fine! Both the symlink and the alias one set the same number of cookies and both set seem to set the cookies for the correct domain and path. My Nginx config for the php alias is as follows: location ~ ^/phpmyadmin/(.*\.php)$ { alias /usr/share/phpMyAdmin/$1; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; include fastcgi_params; fastcgi_param SCRIPT_FILENAME $request_filename; } I'm running Nginx 0.8.53 PHP 5.3.3 MySQL 5.1.47 phpMyAdmin 3.3.9 - self install And php-mcrypt is installed. Has anyone else experienced this behaviour before? Anyone have any ideas about how to fix it?

    Read the article

  • How to move a sata drive to a machine without AHCI mode

    - by Andrew Cooper
    I've got a Dell Inspiron 1545 on which the screen has died. I'm able to plug an external monitor into the Inspiron 1545 and it works fine, so the screen is the only issue. The OS is Win7. I'm trying to move the disk to a spare Dell Precision M90 laptop that I've got lying around. The problem is that almost as soon as the Windows logo appears in the boot sequence I get a BSOD with a STOP 0x0000007B message. Researching this message pointed to issues with SATA AHCI mode. I looked in the BIOS of the Inspiron 1545 and the controller was set to AHCI mode. I set it to ATA mode and tried to boot with the same drive and got the same result as on the Precision M90. Switching back to AHCI allowed the machine to boot correctly again. I checked the BIOS on the Precision M90 and it doesn't seem to support AHCI mode, although it is a SATA controller onboard. The BIOS is the latest A08 version available from Dell. Is there any way I can get this drive to boot in the M90 without reformatting it?

    Read the article

< Previous Page | 372 373 374 375 376 377 378 379 380 381 382 383  | Next Page >