Search Results

Search found 11078 results on 444 pages for 'virtual inheritance'.

Page 376/444 | < Previous Page | 372 373 374 375 376 377 378 379 380 381 382 383  | Next Page >

• Intel NIC X540-T1 non-functional in Ubuntu Server 12.04

  - by Jeff Carr

  I have installed three Intel X540-T1's in servers running Ubuntu Server 12.04, but all are non-functional, no link lights, no packets sent or received, and no connection on ip4 or ip6 whether set up as dhcp or static. Also, dmesg doesn't detect cable connection or disconnection. I updated the default ixgbe driver to Intel's latest version (3.11.33) with no change. The ethernet controller is being reported as X540-AT2 (which might be a problem that I can't figure out how to fix), but the subsystem is X540-T1 so I believe that might be intended. Does anyone have any experience with this that could assist? ifconfig eth2 eth2 Link encap:Ethernet HWaddr a0:36:9f:14:5f:ea inet addr:192.168.101.1 Bcast:192.168.101.255 Mask:255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Metric:1<br> RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) ethtool -i eth2 driver: ixgbe version: 3.11.33 firmware-version: 0x8000037c bus-info: 0000:08:00.0 supports-statistics: yes supports-test: yes supports-eeprom-access: yes supports-register-dump: yes lspci -vvnns 08:00.0 08:00.0 Ethernet controller [0200]: Intel Corporation Ethernet Controller 10 Gigabit X540-AT2 [8086:1528] (rev 01) Subsystem: Intel Corporation Ethernet Converged Network Adapter X540-T1 [8086:0002] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at e8000000 (64-bit, prefetchable) [size=2M] Region 4: Memory at e8200000 (64-bit, prefetchable) [size=16K] [virtual] Expansion ROM at e8280000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: ixgbe Kernel modules: ixgbe

  Read the article

• Recovering data from mangodb raw files

  - by Jin Chen

  we use mongodb for our database and set the replset(two servers), but we mistakenly deleted some raw files that under /path/to/dbdata on both servers, after we used tool to get back the deleted files(we ran the extundelete on both server and mix the result together), like database.1, database.2 etc. we could not start the mongod, it raised the following error when starting mongod or executing mongodump, here is the console output: root@mongod:/opt/mongodb# mongodump --repair --dbpath /opt/mongodb -d database_production Thu Aug 21 16:22:43.258 [tools] warning: repair is a work in progress Thu Aug 21 16:22:43.258 [tools] going to try and recover data from: database_production Thu Aug 21 16:22:43.262 [tools] Assertion failure isOk() src/mongo/db/pdfile.h 392 0xde1b01 0xda42fd 0x8ae325 0x8ac492 0x8bd8e0 0x8c1c51 0x80e345 0x80e607 0x80e6a4 0x6db92a 0x6dc1ff 0x6e0db9 0xd9e45e 0x6ccdc7 0x7f499d856ead 0x6ccc29 mongodump(_ZN5mongo15printStackTraceERSo+0x21) [0xde1b01] mongodump(_ZN5mongo12verifyFailedEPKcS1_j+0xfd) [0xda42fd] mongodump(_ZNK5mongo7Forward4nextERKNS_7DiskLocE+0x1a5) [0x8ae325] mongodump(_ZN5mongo11BasicCursor7advanceEv+0x82) [0x8ac492] mongodump(_ZN5mongo8Database19clearTmpCollectionsEv+0x160) [0x8bd8e0] mongodump(_ZN5mongo14DatabaseHolder11getOrCreateERKSsS2_Rb+0x7b1) [0x8c1c51] mongodump(_ZN5mongo6Client7Context11_finishInitEv+0x65) [0x80e345] mongodump(_ZN5mongo6Client7ContextC1ERKSsS3_b+0x87) [0x80e607] mongodump(ZN5mongo6Client12WriteContextC1ERKSsS3+0x54) [0x80e6a4] mongodump(_ZN4Dump7_repairESs+0x3a) [0x6db92a] mongodump(_ZN4Dump6repairEv+0x2df) [0x6dc1ff] mongodump(_ZN4Dump3runEv+0x1b9) [0x6e0db9] mongodump(_ZN5mongo4Tool4mainEiPPc+0x13de) [0xd9e45e] mongodump(main+0x37) [0x6ccdc7] /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xfd) [0x7f499d856ead] mongodump(__gxx_personality_v0+0x471) [0x6ccc29] assertion: 0 assertion src/mongo/db/pdfile.h:392 Thu Aug 21 16:22:43.271 dbexit: Thu Aug 21 16:22:43.271 [tools] shutdown: going to close listening sockets... Thu Aug 21 16:22:43.271 [tools] shutdown: going to flush diaglog... Thu Aug 21 16:22:43.271 [tools] shutdown: going to close sockets... Thu Aug 21 16:22:43.272 [tools] shutdown: waiting for fs preallocator... Thu Aug 21 16:22:43.272 [tools] shutdown: closing all files... Thu Aug 21 16:22:43.273 [tools] closeAllFiles() finished Thu Aug 21 16:22:43.273 [tools] shutdown: removing fs lock... Thu Aug 21 16:22:43.273 dbexit: really exiting now my env: 1) Debian 3.2.35-2 x86_64(it's a XEN virtual machine) 2) mongodb 2.4.6 and we did not delete the .0 and .ns files we tried to create a new database with the same name and copy these db.ns and db.2, db.3 to the new db, we still met the same error. is there any way to check the valid of raw .ns and datafiles, and how to recover the database?

  Read the article

• Different network response for indentical co-located machines

  - by Santosh

  We have a situation as follows: We have a two different virtual machines (VMs) on some remote server farm. The machines are identical in terms of hardware/software(OS) configurations. We have a J2EE application running on JBoss on each of those two machines. These two applications are of different version sav V1 on VM1 and V2 on VM2. We observed some degraded response time for application V2 when accessed via public URL. When we accessed the application through a secured VPN, there is hardly any difference. The bandwidth test (upload/download speed, ping etc) shows that VM1 is responding better when accessed via secured VPN. We concluded that the application does not seem to have performance issue. Because, it that's the case the performance degradation should also be there when access via VPN. So we concluded its the network problem. But since those two identical VMs are on same network we are looking for the reasons for different responses. My question is, given the above situation, what could be reasons for such a behavior ?

  Read the article

• VirtualBox communication from Linux to/from Windows 7

  - by J. Otto Tennant

  VirtualBox is running in Windows 7 as the host. VirtualBox has the two modifications (one is called Guest Additions; don't remember the other). The Virtual machine has "bridged" networking selected. I have SAMBA set up (now, the problem may be here; it has been three or four years since I last did this) on the Linux guest machine. Neither guest nor host sees the other. From the Windows 7 command prompt, the IP address of the Linux guest pings. The IP address of another computer (a separate Windows 7 on the wireless network) pings from the Linux guest. (I have no idea what IP address the Windows 7 host itself has. The output of "netstat" does not seem to be useful.) So, it seem to me that something should be working. The only workgroup on the LAN is inventively named WORKGROUP. SMB4K should be seeing something. There must be a simple setup step that I am missing. (FWIW, there are two processes running smbd, and no process is running nmbd. YaST says that nmbd is set to run. I am not sure what this means.)

  Read the article

• Unable to write DVD-R(Blank DVD's)

  - by FrozenKing

  I have a problem in dvd drive i.e. It can read CD/DVD and can write CD and all CD/DVD-RW but cannot write DVD DVD drive model is SH-S203B Samsung; I also have a log file created by nero burning rom 11. Actually the fact is no Blank DVD's are being read in my dvd drive only previously written dvd's can be read! Is this the problem of OS or should I try cleaning the dvd drive or my DVD drive is 4yrs old so is it going to spoil now, since it is showing this type of symptoms! OS = WinXP AV = KIS 2012 DVD Drive = Samsung SH-S203B (Also tried latest firmware and downgrade versions also) IA32 Nero Version: 11.2.4.100 Internal Version: 11,2,4,100 Recorder: <TSSTcorp CDDVDW SH-S203B>Version: SB04 - HA 1 TA 0 - 11.2.4.100 Adapter driver: <Serial ATA> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data CD-ROM: <TSSTcorp CDDVDW SH-S203B >Version: SB04 - HA 1 TA 0 - 11.2.4.100 Adapter driver: <Serial ATA> HA 1 18:58:10 #37 SPTI -1511 File SCSIPassThrough.cpp, Line 224 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1511) CDB Data: 0x28 00 00 00 00 00 00 00 10 00 Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x3E Sense Qual: 0x02 Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 3E 02 Buffer x08047340: Len x8000 18:58:10 #38 SectorVerify 20 File Cdrdrv.cpp, Line 12057 Read errors from sector 0 to 14 <Padding> 18:58:19 #39 SPTI -1511 File SCSIPassThrough.cpp, Line 224 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1511) CDB Data: 0x28 00 00 00 00 10 00 00 10 00 Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x3E Sense Qual: 0x02 Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 3E 02 Buffer x08047340: Len x8000 18:58:19 #40 SectorVerify 21 File Cdrdrv.cpp, Line 12057 Read error at sector 15 <Virtual Multisession Info> 18:58:19 #41 SectorVerify 20 File Cdrdrv.cpp, Line 12057 Read errors from sector 16 to 18 <Volume Structure Descriptor Sequence> 18:58:28 #42 SPTI -1511 File SCSIPassThrough.cpp, Line 224 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1511) CDB Data: 0x28 00 00 00 00 20 00 00 10 00 Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x3E Sense Qual: 0x02 Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 3E 02 Buffer x08047340: Len x8000

  Read the article

• Azure's Ubuntu 12.0.4 fails to install PHP5

  - by Alex Kennberg

  Similar to this article from Azure themselves: http://www.windowsazure.com/en-us/manage/linux/common-tasks/install-lamp-stack/ I am trying to install PHP5 on Ubuntu 12.0.4 virtual machine. However, it fails installing the ssl-cert. $ sudo apt-get install php5 Reading package lists... Done Building dependency tree Reading state information... Done php5 is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 49 not upgraded. 1 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Do you want to continue [Y/n]? y Setting up ssl-cert (1.0.28) ... Could not create certificate. Openssl output was: Generating a 2048 bit RSA private key ............................+++ ...................................................................................................................+++ writing new private key to '/etc/ssl/private/ssl-cert-snakeoil.key' ----- problems making Certificate Request 140320238503584:error:0D07A097:asn1 encoding routines:ASN1_mbstring_ncopy:string too long:a_mbstr.c:154:maxsize=64 dpkg: error processing ssl-cert (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: ssl-cert E: Sub-process /usr/bin/dpkg returned an error code (1) Any tips appreciated.

  Read the article

• CentOS 5.5 remote kickstart installation stalls at "Starting install process." How to debug?

  - by ewwhite

  Hello, I'm having a difficult time with a remote CentOS 5.5 kickstart installation on an HP ProLiant DL360 G6. This is in an environment where I maintain an internal CentOS yum repository. The kickstart installation and post scripts have been tested and normally work. This hardware is also common in this environment, so I do not believe that it is a factor. Unfortunately, I'm having problems with a specific server install. The system is remote to the yum repository at a distance of 500 miles. They are connected over a private low-latency 100-megabit layer 2 connection (26ms round-trip). I'm mounting the 10mb CentOS 5 netinstall ISO image via an HP ILO remote console. The initial boot parameters are: linux ks=http://yum.abctrading.com/prop.cfg ksdevice=eth0 ip=x.x.x.x dns=x.x.x.x netmask=255.255.255.0 gateway=x.x.x.x I'm using the url --url http://ks.abctrading.com/5.5/os/x86_64/ method of installation. This quickly boots into the anaconda installer, pulls the kickstart config and formats the drives. The process eventually halts at the screen below, reading "Starting install process.". Going to the other virtual consoles give the second image below. The process stalls at this point and cannot proceed with the rest of the installation. Running the same kickstart config locally works just fine. I've tried mounting the boot ISO from the console as well as from the ILO2 command line pointing to a locally-hosted boot ISO via http. How can I debug this? Are there any options I've overlooked?

  Read the article

• SQL Server 2008 second instance times out when logging in -- but only the first time?

  - by Kromey

  This is a strange one that has plagued me for a while now. When logging in to the second instance of SQL Server 2008 on one of our database servers, we get a timeout error: Cannot connect to servername\mssqlserver2. Additional information: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. (Microsoft SQL Server)") (This is the error message when trying to connect with Microsoft SQL Server Management Studio; other tools experience the same error, but of course say it in different ways.) Immediately re-attempting to log in works just fine, so whatever the cause it's ephemeral! This happens regardless of user or authentication type (both Windows and SQL Server authentication methods are supported on this instance). What's even weirder, though, is that the first instance on this server has never once demonstrated this problem. Server is a Windows Server 2008 R2 virtual server, hosted in Microsoft Hyper-V (host is likewise Server 2008 R2). The server has 2GB of RAM, and seems to regularly be using 90% of that -- could low memory be the cause of this issue? I could see this second instance -- which is not used very often yet -- being swapped out to disk, and then taking too long to load back into memory to respond in time to the connection request, but I'd rather have more than just my own hunch before I go scheduling a downtime for this server (the first instance is used regularly) and then just throwing extra resources at it in the blind hope that the problem goes away.

  Read the article

• Exclamation 403 forbidden for cgi-bin/ and cannot protect site with password

  - by gasgdasdgasdg

  First problem i have is i am getting 403 forbidden error for cgi-bin/ I have created a new /var/www2/ i can access it fine. php runs fine. Second problem is I cannot password protect it. i first tried doing htpasswd, it asks for login but everytime i login it keeps asking for new one. its getting frustrating, i have tried all tricks. and doesn't seem to work. this is a virtual host config inside sites-available. httpd.conf is empty but i have apache2.conf Code: NameVirtualHost 12.12.12.12. <VirtualHost 12.12.12.12> ServerAdmin webmaster@localhost DocumentRoot /var/www2/ <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www2/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /var/www2/cgi-bin/ <Directory "/var/www2/cgi-bin/"> AllowOverride Options Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch AddHandler cgi-script cgi pl Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined ServerSignature On Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost>

  Read the article

• Are there cloud network drives that let users lock files or mark them as "in use"?

  - by Brandon Craig Rhodes

  Having spent several hours reading about the features and limitations of services like DropBox and Jungle Disk and the hundreds of competitors they seem to have (as though everyone with an AWS account these days goes ahead and writes a file sharing application just for fun), I have yet to find one that would let a team of people at a small business collaborate without stepping all over each other's toes. At a small business there are often many small documents per project — estimates, contracts, project plans, budgets — and team members frequently have to open and edit them, with all sorts of problems happening if two people edit a file at once. Even if a sharing service is smart enough to keep both versions of the file created, most small-business software (like word processors, spreadsheets, estimating software, or billing systems) has no way to compare — much less to merge! — the changes in two rival versions of a file that two people edited at the same time without each other's knowledge. So, my question: are their cloud-based file sharing solutions that not only provide a virtual network drive that people can access, but that also let users lock files — even if it's not a real lock but just a flag or indicator — that could possibly prevent remote workers from both editing the same file at once? Having one person wait for another person to finish editing is a very, very small inconvenience compared to the hour or more than it can take to compare two estimates by hand until you find and resolve the rival changes. Given this fact, I am surprised that almost none of the popular file sharing solutions seem to recognize this problem and provide some solution! Does anyone know of a service that does?

  Read the article

• CentOS centralised logging, syslogd, rsyslog, syslog-ng, logstash sender?

  - by benbradley

  I'm trying to figure out the best way to setup a central place to store and interrogate server logs. syslog, Apache, MySQL etc. I've found a few different options but I'm not sure what would be best. I'm looking for something that is easy to install and keep updated on many virtual machines. I can add it to a VM template going forward but I'd also like it to be easy to install to keep the VM complexity down. The options I've found so far are: syslogd syslog-ng rsyslog syslogd/syslog-ng/rsyslog to logstash/ElasticSearch logstash agent in each log "client" to send to Redis/logstash/ElasticSearch And all sorts of permutations of the above. What's the most resilient and light from the log "client" perspective? I'd like to avoid the situation where log "clients" hang because they are unable to send their logs to the logging server. Also I would still like to keep local logging and the rotation/retention provided by logrotate in place. Any ideas/suggestions or reasons for or against any of the above? Or suggestions of a different structure entirely? Cheers, B

  Read the article

• How can I set up a local nameserver and modify DNS zones on it?

  - by Joe Hopfgartner

  This is a follow up to this question. I am having an issue with a Router that doesn't support hairpinning properly. See the link above for details. Now I want to set up a local DNS server that Hosts in our LAN can use to resolve public Hostnames (usual webbrowsing... ). Additionally I want to modify certain zones. In our LAN we have some servers serving resources that are not available in our public dns zone. We always have to configure our local LMHost files accordingly. For example we have a staging installation with a new feature running on a local Webserver, and we cannot access it with the IP directly because the website runs in a named virtual host container, we have to configure LMHost file to point some domain to the local IP address. And now we have also the Hair pinning issue. So my question is: What software can I use? Will bind do the job? I just need to insert some A entries into the zone. As easy as possible. We have local Linux/Ubuntu servers.

  Read the article

• Macbook Pro - 15" with i7 processor - Any problems with heat?

  - by webworm

  You may have already heard about the review done by the folks at PC Authority in Australia, where they had an i7 MacBook Pro that got up to 100 degrees Celsius during benchmarking. Here is the URL in case you have not read it. http://www.pcauthority.com.au/News/172791,macbook-pro-helps-core-i7-hit-100-degrees.aspx In any case, I was considering purchasing a 15" Macbook Pro with the i7 processor and the NVIDIA GeForce GT330M with 512 video memory. Having read how hot the computer got I started to become hesitant about purchasing. My main concern is long term damage to the computer due to excessive heat. I plan to use the MacBook Pro as a development machine where I will be running Windows 7 within VMWare Fusion or Virtual Box. Within the VM I will be running IIS, SQL Server, Visual Studio and SharePoint Server. Hence why I would like to have the power of the i7 processor. That is why I wanted to check with actually owners of the MacBooks with the i7 processor and see what their experiences have been. Have you noticed excessive heat? How does your Macbook handle process intensive apps over long periods of time? Thank you!

  Read the article

• Linux/Unix in Windows

  - by Dmitriy Nagirnyak

  Hi, What would be the best way to get the full-blown Unix/Linux bash inside Windows? I don't mean the Virtual Machine, but rather only the terminal with mounted NTFS drives. This way I could use the power of Unix/Linux still being on Windows. The things I want to be able to do from the terminal: Package management (apt-get in Debian). SSH. File operations (including grub and similar). Run a web server (Apache, nginx) for testing purposes. Easy to use: start terminal - Linux is on, end terminal - Linux is shut down. Would be nice to be able to copy-paste from Windows into Terminal and vice versa. This really feels like a separate OS and I realize that VM would, probably, be the best thing. But I guess it should be possible to have a lighter installation. THE NOTE: I cannot just use Linux because of I still need to do development on Windows. Also I am a Linux noobie - just getting started with it so sorry if asking something obvious/stupid. Thanks, Dmitriy.

  Read the article

• Libvirt / QEmu Machine Fails and Refuses Restart Because of Memory Allocation Errors

  - by Elmar Weber

  I'm having a problem with libvirt. On a system restart all virtual machines (VMs) are started without a problem and keep running. Then at some point in time a set of machines shuts down according to their log. When I try to restart the machine, I'm getting an error that the memory allocation failed, although more than enough memory is free. server ~ # free total used free shared buffers cached Mem: 16176648 16025476 151172 0 285432 950300 -/+ buffers/cache: 14789744 1386904 Swap: 0 0 0 server ~ # virsh start zimbra error: Failed to start domain zimbra error: Unable to read from monitor: Connection reset by peer server ~ # tail -n 4 /var/log/libvirt/qemu/zimbra.log LC_ALL=C PATH=/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/sbin:/sbin:/bin QEMU_AUDIO_DRV=none /usr/bin/kvm -S -M pc-0.12 -enable-kvm -m 3072 -smp 2,sockets=2,cores=1,threads=1 -name zimbra -uuid d05ddb7a-83c4-a77b-d8bc-a322648520cf -nodefconfig -nodefaults -chardev socket,id=charmonitor,path=/var/lib/libvirt/qemu/zimbra.monitor,server,nowait -mon chardev=charmonitor,id=monitor,mode=control -rtc base=utc -no-shutdown -drive file=/var/lib/libvirt/images/zimbra.img,if=none,id=drive-ide0-0-0,format=raw -device ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0,bootindex=1 -netdev tap,fd=19,id=hostnet0 -device rtl8139,netdev=hostnet0,id=net0,mac=52:54:00:21:a9:ad,bus=pci.0,addr=0x3 -chardev pty,id=charserial0 -device isa-serial,chardev=charserial0,id=serial0 -usb -vnc 192.168.1.2:25 -k de -vga cirrus -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x4 char device redirected to /dev/pts/2 Failed to allocate 3221225472 B: Cannot allocate memory 2012-07-06 08:42:56.076+0000: shutting down server ~ # uname -a Linux server 3.2.0-26-generic #41-Ubuntu SMP Thu Jun 14 17:49:24 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux The system is a Ubuntu 12.04 server. The problem seems to occurs since the last restart, which was due to a number of package upgrades and a kernel upgrade. I tried booting with the previous kernel, the problem persists. I was not able to pinpoint an exact event when the machines fail, they do it at nearly the same time. The last time a duplicity job was running, this was not always the case however. Any suggestions on how to debug this? Best regards, elm

  Read the article

• How to convert a raw disk image to a copy-on-write image based on another image for use with kvm and

  - by Jean-Paul Calderone

  I have a virtual Windows machine running on kvm. Presently it has a 90GB raw disk image. I would like to clone this VM without having to keep two copies of the 90GB raw disk image around. It seems like a good approach for doing this is to make two new qcow or qcow2 images based on the original. First I converted the raw image to a qcow2 image: qemu-img convert -O qcow2 basewindowsxp.img basewindowsxp.qcow2 Then I tried creating a new image backed by this: qemu-img create -F qcow2 -f qcow2 -b `pwd`/basewindowsxp.qcow2 windowsxp-1.qcow2 Then I used virt-manager to point the original VM at windowsxp-1.qcow2. However, when I try to start up the VM in this new configuration, virt-manager reports an error: Traceback (most recent call last): File "/usr/share/virt-manager/virtManager/engine.py", line 588, in run_domain vm.startup() File "/usr/share/virt-manager/virtManager/domain.py", line 150, in startup self._backend.create() File "/usr/lib/python2.6/dist-packages/libvirt.py", line 300, in create if ret == -1: raise libvirtError ('virDomainCreate() failed', dom=self) libvirtError: internal error unable to start guest: qemu: could not open disk image /var/lib/libvirt/images/windowsxp-1.qcow2 The error suggests that the filename was misspecified or that the filesystem permissions are too restrictive, but neither of these is the case: $ ls -l /var/lib/libvirt/images/windowsxp-1.qcow2 -rwxrwxrwx 1 root root 262144 2010-05-27 08:32 /var/lib/libvirt/images/windowsxp-1.qcow2 Why won't virt-manager start this vm?

  Read the article

• postfix (for sending mail only) multiple domain setup

  - by seanl

  I have the following problem, I have a Centos 5.4 VPS hosting a few nginx sites (some static, some cakephp), I would like to be able to send email from each sites contact page through postfix to my google apps hosted email (different accounts for each site) so that apps can then send out an auto email to the person filling in the contact form etc I have a bare-bones postfix installation with the following added into the main.cf config file. from using this guide virtual_alias_domains = hash:/etc/postfix/virtual_alias_domains virtual_alias_maps = hash:/etc/postfix/virtual_alias_maps (both of these files have been converted into db files using postmap) I have configured DNS correctly for each site and setup SPF records. (I'm aware R-DNS will still reference my actual hostname not the domain name and cause a possible spam issue but one thing at a time) I can telnet localhost and the helo localhost so that I can send a command line email from an address in the virtual_alias_domains to an email in the virtual_alias_maps file which seems sends without giving an error but it is sending to my local linux account not the email address specified. my question is am i approching this the wrong way in terms of the virtual alias mapping or is this even possible to do in the manner im trying. Any help is greatly appreciated thanks. my postconf -n outlook looks like this alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix debug_peer_level = 2 html_directory = no inet_interfaces = localhost mail_owner = postfix mailq_path = /usr/bin/mailq.postfix manpage_directory = /usr/share/man mydestination = $myhostname, localhost.$mydomain, localhost myhostname = myactual hostname mynetworks = 127.0.0.0/8 myorigin = $mydomain newaliases_path = /usr/bin/newaliases.postfix queue_directory = /var/spool/postfix readme_directory = /usr/share/doc/postfix-2.3.3/README_FILES sample_directory = /usr/share/doc/postfix-2.3.3/samples sendmail_path = /usr/sbin/sendmail.postfix setgid_group = postdrop unknown_local_recipient_reject_code = 550 virtual_alias_domains = hash:/etc/postfix/virtual_alias_domains virtual_alias_maps = hash:/etc/postfix/virtual_alias_maps

  Read the article

• Network Misconfiguration when adding first host to new vSphere cluster

  - by dunxd

  I am building a new vSphere cluster from scratch. I have installed ESXi on the first host, and built a vCenter server on a VM residing on that host (storage is on the local hard drive, although we have iSCSI targets which I can reach from the host). The cluster is configured for HA. When I try and add the host to the cluster, I get an error at the point where HA is configured - Cannot complete the . I have stripped the network configuration of the host down to the most basic - a single NIC attached to a single vSwitch - this is running the VMKernel Port on VLAN 8 - that is our Management VLAN. The vCenter server will have a network address on this VLAN, so I also set the initial Virtual Machine Port Group to this VLAN, and connected the vCenter server NIC to this port group. I understand I can't connect the vCenter server to the VMkernel port group, but shouldn't I be able to connect the vCenter server to a Port Group in the same VLAN? If not, do I need to create a VLAN specifically for VMKernel Port Group? I plan to set up another port group for vMotion with a dedicated and isolated VLAN (i.e. VLAN isn't routed) so this wouldn't allow vCenter to communicate. Does anyone have any suggestions, or other ideas for what might be causing the problem. I've read through the documentation, but it isn't giving me any pointers, and the error message isn't helping me beyond telling me something is wrong with my network config.

  Read the article

• Windows Server 2008 R2 - Cannot Change DNS Domain Context on Some Machines

  - by Richie086

  So I have a small Windows Server 2008 R2 network consisting of a domain controller, a file server, sql server, etc. All machines are joined to a windows domain (CPUSHIELD.COM) and show up in Active Directory Users and Computers under the Computers OU. Each computer has a DNS record as well that was populated when I joined each computer to the domain. However, when I go to my SQL server VM (which is joined to CPUSHIELD.COM) and try to add domain users or groups to the local users or groups on my file server (which is a physical machine) or my sql server (which is a virtual machine), for some reason I cannot change the context to the CPUSHIELD.COM domain.. For example: Here is the really strange thing, I have two other servers on my network that do show CPUSHIELD.COM in the From This Location field (as I would expect with any machine joined to a domain) and I am able to search the local machine and/or domain for users/groups to add. I have done hundreds of Windows Server 2008 installs and this is the first time I have run into this issue. Any ideas? Let me know if you need more info

  Read the article

• Mac OS X Lion Apache Server not Found

  - by Burak Erdem

  After upgrading to Lion 10.7.2 today, Apache virtual hosts are not working anymore. When I go to http://XYZ.localhost, it say "server not found". I am using Apache on my Mac OS X Lion and until today, it was working fine. I can access http://localhost but I can't access http://XYZ.localhost My /etc/hosts file is like below; 127.0.0.1 XYZ.localhost My /etc/apache2/extra/httpd-vhosts.conf file is like below; <VirtualHost *:80> ServerName XYZ.localhost DocumentRoot /Library/WebServer/Documents/XYZ <Directory /Library/WebServer/Documents/XYZ> DirectoryIndex index.php AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost> I think I once had this problem too, after another OS X update, but I can't remember how I solved it. Is it a user permission issue? Or is there something wrong with Apache or any other setting? EDIT: It seems like my /etc/hosts file is not working correctly. Even if I add something like 127.0.0.1 apple.com it still goes to the real apple.com. Maybe this might help to solve the problem.

  Read the article

• Make case-sensitive SMB share case-insensitive

  - by fungs

  I am running a legacy XP app that I would like to move on a network share. It is very simple and works in theory but the server providing the share is based on Linux (cannot configure) and the software does not work correctly because it is programmed case-insensitively, it seems. After some research, network shares behave like the filesystem they use underneath. This is normal. Unfortunately I cannot fix the software myself. Is there any way to turn the case-sensitivity into case-insensitivity for a Windows network drive on the client side? I fould two approaches: First, something like icasefile (http://wnd.katei.fi/icasefile/) that wraps around the program and intercepts the file I/O. This is for UNIX only. Secondly, a proxy virtual file system (e. g. something using Dokan). Unfortunately I couldn't find any suitable fs, the only possibility would be to put a case-insensitive filesystem on an image file and put this on the share using for example lmdisk (http://www.ltr-data.se/opencode.html/#ImDisk). Do you have any better ideas?

  Read the article

• Setting up Windows network on Xen

  - by samyboy

  I'm trying to install a Windows XP server in a Xen environment. The OS is booting fine. Unfortunately I can't figure out how to set up the network settings. Dom0 is a Debian Lenny currently hosting around 10 Linux virtual servers. Windows tells me I have a "limited connection". It can't get any DHCP response, nor access other hosts in the network Here is the Xen's client config file: kernel = '/usr/lib/xen-3.2-1/boot/hvmloader' builder = 'hvm' memory = '1024' device_model='/usr/lib/xen-3.2-1/bin/qemu-dm' acpi=1 apic=1 pae=1 vcpus=1 name = 'winexchange' # Disks disk = [ 'phy:/dev/wnghosts/exchange-disk,ioemu:hda,w', 'file:/mnt/freespace/ISO/DVD1_Installation.iso,ioemu:hdc:cdrom,r' ] # Networking vif = [ 'mac=00:16:3E:0A:D0:1B, type=ioemu, bridge=xenbr0'] # video stdvga=0 serial='pty' ne2000=0 # Behaviour boot='c' sdl=0 # VNC vfb = [ 'type=vnc' ] vnc=1 vncdisplay=1 vncunused=1 usbdevice='tablet' Server config (/etc/xen/xend-config.sxp) (network-script network-bridge) (network-script network-dummy) (vif-script vif-bridge) (dom0-min-mem 512) (dom0-cpus 0) (vnc-listen '0.0.0.0') Since I use Debian I had to create a link like this: /etc/xen/qemu-ifup - /etc/xen/scripts/qemu-ifup What did I do wrong? Please tell me if you want some more info (logs, etc)

  Read the article

• Tcpreplaying using VMware

  - by Methos

  This is more like a testbed setup question. I want to use VMware to debug some networking code in the linux kernel in the VM. My VM has two network interfaces. What I want to do is replay the capture file in the host and receive the packets in the VM. My problem is I do not see replayed packets in the VM. I am running VMware and tcpreplay on the host as sudo. Hence I think there should not be any problem access devices files. I am running VMware workstation 7.0 a. I first began with Custom networking as that provides option of creating your own virtual network name. I wrote /dev/vmnet3 and /dev/vmnet4 for the two interfaces respectively. However, after booting the guest, I did not see any of these interfaces or devices files (in /dev) created on the host. b. Then I tried 'Host Only', but that does not show what bridge/device file is associated with the interface. c. Finally I tried bridged networking mode. I see vmnet1, vmnet8 and vboxnet0 on the host. I have tcpreplayed the capture file on each of these interfaces, for all the above three cases. I tried to capture packets in the VM using "tcpdump -i any". However, I do not see any packets. Any ideas/pointers?

  Read the article

• Windows 8 Pro Hyper-V guest with no internet

  - by Perplexed

  Trying to get this working on my Windows 8 Pro machine. I created an External Switch Assigned the newly available adapter to a Guest machine with Win 2008 os. My host has internet connection. Host can ping Guest, Guest cannot ping Host. Guest has no internet connection. Pasting the ip of both host and guest. Your help appreciated. HOST ========================== Ethernet adapter vEthernet (EXTSW01): Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Hyper-V Virtual Ethernet Adapter #2 Physical Address. . . . . . . . . : 9C-B7-0F-0F-D7-D0 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::5434:a9fd:8611:d207%54(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.0.15(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : Saturday, September 8, 2012 12:34:44 PM Lease Expires . . . . . . . . . . : Saturday, September 15, 2012 12:34:44 PM Default Gateway . . . . . . . . . : 192.168.0.1 DHCP Server . . . . . . . . . . . : 192.168.0.1 DHCPv6 IAID . . . . . . . . . . . : 916240141 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-17-DC-C9-2C-9C-B7-0D-0D-D7-D0 DNS Servers . . . . . . . . . . . : 64.71.255.999 NetBIOS over Tcpip. . . . . . . . : Enabled GUEST ========================== Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Virtual Machine Bus Network Adapter Physical Address. . . . . . . . . : 00-15-5D-3F-0F-00 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::953f:ec5c:5d84:1b50%11(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.0.20(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 0.0.0.0 DHCPv6 IAID . . . . . . . . . . . : 234886493 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-17-DD-2F-29-0F-15-5E-00-0F-00 DNS Servers . . . . . . . . . . . : ::1 127.0.0.1 NetBIOS over Tcpip. . . . . . . . : Enabled

  Read the article

• SSD causing 100% CPU usage in Apache/PHP

  - by Tim Reynolds

  I wanted to increase the performance on my development laptop so I added an Intel 320 Series SSD as my primary drive. Everything is amazingly fast, as expected, except Apache/PHP. I develop Magento by using an Ubuntu 10.10 virtual machine. Information: Host OS: Win 7 Professional 64bit Guest OS: Ubuntu 10.10 32bit Processor: i7 Chipset QM55 SSD: Intel 320 Series 160gb 30% full HDD: Hitachi 320gb 50% full (in side bay using an adapter) Laptop: Lenovo T510 Using: Shared folders Apache Version: 2.2.16 PHP Version: 5.3.3-1 APC Version: 3.1.3p1 APC Memory: 128M Using tmpfs for cache, log, session directories in Magento In the VM running on the SSD (VM files and source files are on the same drive) loading a product page in the Admin takes on average 26.2 seconds and uses 100% CPU for nearly the entire time. In the VM running on the old HDD loading the same page takes on average 4.4 seconds. It mostly uses around 40-50% of the CPU while rendering the page. I have read this post: Performance issues when using SSD for a developer notebook (WAMP/LAMP stack)? It says to change some settings in the bios. I have turned any and all power management features off in the bios. I can't for the life of me understand why this would be happening.

  Read the article

< Previous Page | 372 373 374 375 376 377 378 379 380 381 382 383  | Next Page >