Search Results

Search found 22447 results on 898 pages for 'cpu load'.

Page 377/898 | < Previous Page | 373 374 375 376 377 378 379 380 381 382 383 384  | Next Page >

• Rapid calls to fread crashes the application

  - by Slynk

  I'm writing a function to load a wave file and, in the process, split the data into 2 separate buffers if it's stereo. The program gets to i = 18 and crashes during the left channel fread pass. (You can ignore the couts, they are just there for debugging.) Maybe I should load the file in one pass and use memmove to fill the buffers? if(params.channels == 2){ params.leftChannelData = new unsigned char[params.dataSize/2]; params.rightChannelData = new unsigned char[params.dataSize/2]; bool isLeft = true; int offset = 0; const int stride = sizeof(BYTE) * (params.bitsPerSample/8); for(int i = 0; i < params.dataSize; i += stride) { std::cout << "i = " << i << " "; if(isLeft){ std::cout << "Before Left Channel, "; fread(params.leftChannelData+offset, sizeof(BYTE), stride, file + i); std::cout << "After Left Channel, "; } else{ std::cout << "Before Right Channel, "; fread(params.rightChannelData+offset, sizeof(BYTE), stride, file + i); std::cout << "After Right Channel, "; offset += stride; std::cout << "After offset incr.\n"; } isLeft != isLeft; } } else { params.leftChannelData = new unsigned char[params.dataSize]; fread(params.leftChannelData, sizeof(BYTE), params.dataSize, file); }

  Read the article

• How to find/extract data from xml with jQuery

  - by darryl

  I'm trying to extract the StateLongName and StateShortName values from the xml below. I know there has to be a simple elegant way to do this with jQuery. <NewDataSet> <Table> <StateLongName>Alabama</StateLongName> <StateShortName>AL</StateShortName> </Table> <Table> <StateLongName>Alaska</StateLongName> <StateShortName>AK</StateShortName> </Table> ...elments removed for brevity </NewDataSet> Here's what I've tried. Load the xml from above into a Javascript variable name xml. Try #1 $(xml).find("TABLE").each(function() { var stateName = $(this).find("StateLongName").innerText; var stateCode = $(this).find("StateShortName").innerText; }); Try #1 doesn't find anything and never goes inside to load the stateName and stateCode variables. Try #2 $(xml).find("StateLongName").each(function() { var stateName = $(this).find("StateLongName").innerText; var stateCode = $(this).find("StateShortName").innerText; }); Try #2 does find matches, however the stateName and stateCode are left undefined. Try #3 $(xml).find("StateLongName").each(function() { var stateName = $($(xml).find('StateLongName').parent()[0].innerHTML)[1].data; var stateCode = $($(xml).find('StateLongName').parent()[0].innerHTML)[5].data; }); Try #3 works but there has to be a better way. Please enlighten me. Thanks for you time!

  Read the article

• What can cause peaks in pagetables in /proc/meminfo ?

  - by Fuzzy76

  I have a gameserver running Debian Lenny on a VPS host. Even when experiencing a fairly low load, the players start experiencing major lag (ping times rise from 50 ms to 150-500 ms) in bursts of 3 - 10 seconds. I have installed Munin server monitoring, but when looking at the graphs it looks like the server has plenty of CPU, RAM and bandwidth available. The only weird thing I noticed is some peaks in the memory graph attributed to "page_tables" which maps to PageTables in /proc/meminfo but I can't find any good information on what this might mean. Any ideas what might be causing this? If you need any more graps, just let me know. The interrupts/second count is at roughly 400-600 during this period (nearly all from eth0). The drop in committed was caused by me trying to lower the allocated memory for the server from 512MB to 256MB, but that didn't seem to help.

  Read the article

• Execute binary from memory in C# .net with binary protected from a 3rd party software

  - by NoobTom

  i've the following scenario: i've a C# application.exe i pack application.exe inside TheMida, a software anti-piracy/reverse engineering. i encrypt application.exe with aes256. (i wrote my own aes encryption/decryption and it is working) Now, when i want to execute my application i do the following: decrypt application.exe in memory execute the application.exe with the following code: BinaryReader br = new BinaryReader(decOutput); byte[] bin = br.ReadBytes(Convert.ToInt32(decOutput.Length)); decOutput.Close(); br.Close(); // load the bytes into Assembly Assembly a = Assembly.Load(bin); // search for the Entry Point MethodInfo method = a.EntryPoint; if (method != null) { // create an istance of the Startup form Main method object o = a.CreateInstance(method.Name); // invoke the application starting point method.Invoke(o, null); the application does not execute correctly. Now, the problem i think, is that this method is only to execute .NET executable. Since i packed my application.exe inside TheMida this does not work. Is there a workaround to this situation? Any suggestion? Thank you in advance.

  Read the article

• Windows 7: Search indexing is stuck

  - by Ricket

  When I open Indexing Options, it says: 4,317 items indexed Indexing in progress. Search results might not be complete during this time. It's stuck at 4,317 though; no more items have been indexed. Worst of all, SearchIndexer.exe is taking up 100% CPU (well, 50%, but I have a dual core CPU; it's taking up all processing power it can). It is not causing hard drive activity though. I tried clicking "Troubleshoot search and indexing" at the bottom of the Indexing Options window, but it couldn't find any problem. I've also tried the repair registry key that several websites suggest; I change HKLM\SOFTWARE\Microsoft\Windows Search SetupCompletedSuccessfully to 0 and restarted the computer, and it apparently repaired because it flipped back to 1, but the same problem continues to occur. It's reducing the battery life of my laptop and making it really hot so that my fans are running all the time. I've had to disable the Windows Search service. How can I fix this? Do I need to just flat-out reformat my computer? Update: I've tried rebuilding a couple times. There's nothing unusual about the locations I have to index, and I don't have any downloads in progress or anything like that. I don't see any reason why it stopped, and I noticed it much too late to do a system restore. At this point, I'm hoping someone will offer up some secret answer that will fix the problem, thus the bounty. Another update: I tried starting the service again, just to let it try yet again. It seemed okay at first (Indexing Options showed it operating at reduced speed due to user activity, and the number of files was going up). A while later I checked, and the service had stopped. Event viewer revealed some errors like this: Log Name: Application Source: Application Error Date: 2/1/2010 7:34:23 PM Event ID: 1000 Task Category: (100) Level: Error Keywords: Classic User: N/A Computer: ricky-win7 Description: Faulting application name: SearchIndexer.exe, version: 7.0.7600.16385, time stamp: 0x4a5bcdd0 Faulting module name: NLSData0007.dll, version: 6.1.7600.16385, time stamp: 0x4a5bda88 Exception code: 0xc0000005 Fault offset: 0x002141ba Faulting process id: 0x13a0 Faulting application start time: 0x01caa39f2a70ec02 Faulting application path: C:\Windows\system32\SearchIndexer.exe Faulting module path: C:\Windows\System32\NLSData0007.dll Report Id: b4f7a7ae-0f92-11df-87fc-e5d65d8794c2 Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Application Error" /> <EventID Qualifiers="0">1000</EventID> <Level>2</Level> <Task>100</Task> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2010-02-02T00:34:23.000000000Z" /> <EventRecordID>10689</EventRecordID> <Channel>Application</Channel> <Computer>ricky-win7</Computer> <Security /> </System> <EventData> <Data>SearchIndexer.exe</Data> <Data>7.0.7600.16385</Data> <Data>4a5bcdd0</Data> <Data>NLSData0007.dll</Data> <Data>6.1.7600.16385</Data> <Data>4a5bda88</Data> <Data>c0000005</Data> <Data>002141ba</Data> <Data>13a0</Data> <Data>01caa39f2a70ec02</Data> <Data>C:\Windows\system32\SearchIndexer.exe</Data> <Data>C:\Windows\System32\NLSData0007.dll</Data> <Data>b4f7a7ae-0f92-11df-87fc-e5d65d8794c2</Data> </EventData> </Event> If you are having the same error and arrived here from a Google search, please comment or add an answer detailing your progress on this, if any...

  Read the article

• Hibernate design to speed up querying of large dataset

  - by paddydub

  I currently have the below tables representing a bus network mapped in hibernate, accessed from a Spring MVC based bus route planner I'm trying to make my route planner application perform faster, I load all the above tables into Lists to perform the route planner logic. I would appreciate if anyone has any ideas of how to speed my performace Or any suggestions of another method to approach this problem of handling a large set of data Coordinate Connections Table (INT,INT,INT, DOUBLE)( Containing 50,000 Coordinate Connections) ID, FROMCOORDID, TOCOORDID, DISTANCE 1 1 2 0.383657 2 1 17 0.173201 3 1 63 0.258781 4 1 64 0.013726 5 1 65 0.459829 6 1 95 0.458769 Coordinate Table (INT,DECIMAL, DECIMAL) (Containing 4700 Coordinates) ID , LAT, LNG 0 59.352669 -7.264341 1 59.352669 -7.264341 2 59.350012 -7.260653 3 59.337585 -7.189798 4 59.339221 -7.193582 5 59.341408 -7.205888 Bus Stop Table (INT, INT, INT)(Containing 15000 Stops) StopID RouteID COORDINATEID 1000100001 100 17 1000100002 100 18 1000100003 100 19 1000100004 100 20 1000100005 100 21 1000100006 100 22 1000100007 100 23 This is how long it takes to load all the data from each table: stop.findAll = 148ms, stops.size: 15670 Hibernate: select coordinate0_.COORDINATEID as COORDINA1_2_, coordinate0_.LAT as LAT2_, coordinate0_.LNG as LNG2_ from COORDINATES coordinate0_ coord.findAll = 51ms , coordinates.size: 4704 Hibernate: select coordconne0_.COORDCONNECTIONID as COORDCON1_3_, coordconne0_.DISTANCE as DISTANCE3_, coordconne0_.FROMCOORDID as FROMCOOR3_3_, coordconne0_.TOCOORDID as TOCOORDID3_ from COORDCONNECTIONS coordconne0_ coordinateConnectionDao.findAll = 238ms ; coordConnectioninates.size:48132 Hibernate Annotations @Entity @Table(name = "STOPS") public class Stop implements Serializable { @Id @GeneratedValue(strategy = GenerationType.AUTO) @Column(name = "STOPID") private int stopID; @Column(name = "ROUTEID", nullable = false) private int routeID; @ManyToOne(fetch = FetchType.LAZY) @JoinColumn(name = "COORDINATEID", nullable = false) private Coordinate coordinate; } @Table(name = "COORDINATES") public class Coordinate { @Id @GeneratedValue @Column(name = "COORDINATEID") private int CoordinateID; @Column(name = "LAT") private double latitude; @Column(name = "LNG") private double longitude; } @Entity @Table(name = "COORDCONNECTIONS") public class CoordConnection { @Id @GeneratedValue @Column(name = "COORDCONNECTIONID") private int CoordinateID; @ManyToOne(fetch = FetchType.LAZY) @JoinColumn(name = "FROMCOORDID", nullable = false) private Coordinate fromCoordID; @ManyToOne(fetch = FetchType.LAZY) @JoinColumn(name = "TOCOORDID", nullable = false) private Coordinate toCoordID; @Column(name = "DISTANCE", nullable = false) private double distance; }

  Read the article

• How do I get a ComboBox SelectionChanged event to fire from a nested ListBoxItem?

  - by Stephen McCusker

  This is a rather complex problem that has me really confused right now. Any help would be greatly appreciated. The Setup: ListBox of Type A UserControls -ListBoxItem of Type A UserControl --ListBox of Type B UserControls ---ListBoxItem of Type B UserControl ----ListBox of Type C UserControls -----ListBoxItem of Type C UserControl (contains the ComboBox) In other words, the Type A control has a ListBox of Type B controls that has a ListBox of Type C controls. All of the controls are hierarchical in nature. Type A contains the data that's needed to load the Type B controls and the Type B contains the data that's needed to load the Type C controls. The Type C control has a standard ComboBox in it for changing the values of the present items. In addition to the above structure, I have drag and dropping tied to the PreviewMouseLeftButtonDown event on both the Type A and Type B UserControl levels to handle reordering/deleting/etc commands in the GUI. All of this is working as intended. The Problem: When I attempt to change the value in the ComboBox, the SelectionChanged event never fires on the Type C "level" unless I'm careful enough to click on the borders/spacing in between any Type A or B controls. This happens when my ComboBox popout menu overlaps on either a Type A or B control located below itself. The selection events for Type A or B are firing instead of the Type C events, so the ComboBox is never changing its value reliably. In the debugger, the code for handling the drag and drop is triggering on the next ListBoxItem that's located underneath the ComboBox. Thoughts: Is there a way I can make my ComboBox popup take prevalence over the items behind it while double-nested in a ListBox (ie, ignore anything behind it while it's open)? Is there some way to reroute the incorrectly firing SelectionChanged events down to the ComboBox that's supposed to be triggering them?

  Read the article

• Is it possible to restrict fileserver access to domain users using computers that are members of the domain?

  - by Chris Madden

  It seems domain isolation can be used to accomplish, but I'd like a solution that doesn't require IPsec, or more accurately, doesn't require IPsec on the fileserver. IPsec if done in software has a large CPU overhead and our NAS boxes don't support any kind of offload. The goal is to avoid authenticated users using non-managed machines to access network resources. Network Access Protection (NAP) and the various enforcement points looked promsiing but I couldn't find a bulletproof way to use them [which doesn't require IPsec on the fileserver]. I was thinking when a domain user accesses the NAS box it will first need a Kerberos ticket from AD, so if AD could somehow verify the computer that was requesting the ticket was in the domain I'd have a solution.

  Read the article

• Need to upgrade DDR2 RAM on HP Desktop

  - by jds

  I have this HP Pavilion Desktop. As you can see, that page says the memory speed supported is PC2-4200. It currently has a 512 MB stick - CPU-Z Screenshots: hxxp://i41.tinypic.com/j5clj6.jpg and hxxp://i39.tinypic.com/20tldlc.jpg However, a crucial.com scan gives a slightly different report - hxxp://crucial.com/systemscanner/viewscanbyid.aspx?id=5718CFE831D926C3 It says the system can support PC2-5300 memory. So my question is which one should I trust? I want to upgrade the computer's ram to 2 GB (the maximum supported), because XP Media Center is giving me problems and I will install Windows 7 on this. PC2-6400 is the most common DDR2 memory I have been able to find here in the market. Will it cause any problems if I install 2 × 1 GB PC2-6400 DDR2 memory sticks (in dual channel) in this computer, (afaik, it will just run at the lower speed of 533 MHz, or whatever the motherboard supports), or do I absolutely need to get PC2-4200 sticks?

  Read the article

• MBP becomes very hot after using Xcode

  - by Globalhawk

  Hardware: MBP early 2011 version OS: Mountain lion App: Xcode 4.5.2 Problem: Every time when I start Xcode, 2 or 3 processes called "git" start running. But when I quit Xcode the "git" process won't quit and are still using a lot of CPU. Then the computer becomes quite hot and the battery gets drained very quickly. If I manually kill these processes the problem is gone. I tried to reinstall Xcode several times but the problem comes back every time. It drives me crazy. Any help will be appreciated!

  Read the article

• Clear / Flush cached memory

  - by TheDave

  I have a small VPS with 6GB RAM hosting a couple of websites. Recently I have noticed that my cached memory size is quite high - see below: Cpu(s): 0.1%us, 0.1%sy, 0.0%ni, 99.1%id, 0.0%wa, 0.2%hi, 0.4%si, 0.0%st Mem: 6113256k total, 5949620k used, 163636k free, 398584k buffers Swap: 1048564k total, 104k used, 1048460k free, 3586468k cached After investigating if there is some method to have this flushed or cleared I stumbled upon a command which is: sync; echo 3 > /proc/sys/vm/drop_caches I read it could be useful to add this to a chron-task/job. Is this method recommended or could this lead to potential problems? The only concern I have is that I use one Magento installation on Memcached - could this have any negative effects on it? I am certainly not a pro therefore I would very much appreciate some expert advise. PS: My VPS runs on CentOS 5 x64 and I have WHM + NGINX installed.

  Read the article

• Virtual Machine files on ramdisk doesn't run faster than on physical disk

  - by Landy

  I installed total 36G memory (4x8G + 2x2G) in the host (Windows 7) and I used ImDisk to create a 32G ramdisk and format it to NTFS file system. Then I copied the virtual machine (in VMware Workstation format) folder, including vmx, vmdk, etc... to the new created ram disk. Then I tried to power on it in VMware Workstation. What made me surprised is that the performance is not better than before. It cost almost the same time to power on the Windows 7 VM. I check the Resource Monitor in the Windows 7 host, and the statistics of CPU, disk, network are rather normal. The memory has reported 3000+ hard fault/sec when guest OS boot then drop to 0 after the guest powered on. Any idea about this issue? I had thought the performance of ramdisk will be better than physical disk in this case. Am I wrong? Thanks.

  Read the article

• Is a ext3 Linux filesystem byte order independent

  - by Lothar

  I have a good old HP-C3700 Workstation with PA-RISC CPU here that I would like to use as a subversion server for a very large repository. I just worry what happens if the workstation dies (everybody who knows this computer knows that it is running like an Abrams tank and unlikely to happen in the next decade). I'm using Debian Linux on this system. If the mainboard dies can I just plug the SCSI drive into a PC and read the files from a normal Intel Linux PC? Which software RAID levels would be safe?

  Read the article

• How to control the order of module initialization in Prism

  - by Robert Taylor

  I'm using Prism V2 with a DirectoryModuleCatalog and I need the modules to be initialized in a certain order. The desired order is specified with an attribute on each IModule implementation. This is so that as each module is initialized, they add their View into a TabControl region and the order of the tabs needs to be deterministic and controlled by the module author. The order does not imply a dependency, but rather just an order that they should be initialized in. In other words: modules A, B, and C may have priorities of 1, 2, and 3 respectively. B does not have a dependency on A - it just needs to get loaded into the TabControl region after A. So that we have a deterministic and controllable order of the tabs. Also, B might not exist at runtime; so they would load as A, C because the priority should determine the order (1, 3). If i used the ModuleDependency, then module "C" will not be able to load w/o all of it's dependencies. I can manage the logic of how to sort the modules, but i can't figure out where to put said logic.

  Read the article

• New Rails deployment half working...not sure why?

  - by Meltemi

  I'm in the final stages of going round trip through the entire Rails cycle: development - test - production (on an external server). I'm very close...but seeing some errors with the production version and don't know enough about Rails' "magic" to troubleshoot it yet... all seems well and I can load my app by going to www.mydomain.com/rails and it seems to work...I can interact with my app and create new objects in my database. However, when I go to www.mydomain.com/rails/ (difference is the trailing slash) i get a webpage that just says "Index from public" on it?!? I don't know where that's coming from? index.html is long removed from public. this may or may not be related to why I can't access, say, the first record in one of my classes by calling its controller like so: www.mydomain.com/rails/mycontroller/1 . and yes, there are records in the database. anyway, something's askew. it works fine on development box. but, only half working on production server. anyone know what might be causing this? this app is running on the server box (not development) Installed Passenger on server to serve app via Apache modified my httpd.conf with Passenger's stuff (headache but finally got it to respond) loaded schema into the production database: rake db:schema:load RAILS_ENV=production

  Read the article

• Open a screen session inside a certain user on boot Ubuntu Server Linux

  - by Pez Cuckow

  I currently have a private server which I test my web apps on which runs Ubuntu Server 10.04 I also host a few game servers (rather than having wasted CPU time :-D) for some of my friends. These game servers I run in the game user account and each one has it's own screen session (so friends can ssh in and reboot the game server etc...). For example screen -R l4d2 runs ./start in the L4D2 folder. However if I reboot the server (which I have to do occasionally) all these sessions close and I have to manually create all the screen sessions and run the required games within them. Is there a way to set these screen sessions as Daemons or services or just boot on server start so they restart themselves on server reboot? I hope I have made my question easy to understand but feel free to ask questions! Many thanks,

  Read the article

• How can I create multiple identical AWS EC2 server instances with large amounts of persistent data?

  - by mojones

  I have a CPU-intensive data-processing application that I want to run across many (~100,000) input files. The application needs a large (~20GB) data file in order to run. What I would like to do is create an EC2 machine image that has my application and associated data files installed boot up a large number (e.g. 100) of instances of this image split my input files up into 100 batches and send one batch to be processed on each instance I am having trouble figuring out the best way to ensure that each instance has access to the large data file. The data file is too big to fit on the root filesystem of an AMI. I could use Block Storage, but a given Block Storage volume can only be attached to a single instance, so I would need 100 clones. Is there some way to create a custom image that has more space on the root filsystem so that I can include my large data file? Or is there a better way to tackle this problem?

  Read the article

• Memory Profiling with DotTrace Questions

  - by cam

  I ran dotTrace on my application (which is having some issues). IntPtr System.Windows.Forms.UnsafeNativeMethods.CallWindowProc(IntPtr, IntPtr, Int32, IntPtr, IntPtr) Void System.Windows.Forms.UnsafeNativeMethods.WaitMessage() Are the two main functions that came up, taking about 94% of the application time. Since I didn't know what these two functions were, I ran through my code line by line. It runs smooth and efficiently until a point where it just hangs. "newFrm.Show()". The newFrm only contains a textbox. The larger the file I load into the text box (it's a notepad program), the longer it takes. Now normally this makes sense, but it takes about 30 seconds for a 167 kB file. Now I'm not sure what to do. It runs incredibly slow/stops functioning when you load a textfile and try to resize the window containing the text file too. Then I realized that it is only struggling to open text files with a long string of hex inside (ie) "XX-XX-XX-" etc. With other similarly sized files it struggles with resizing somewhat, but opens within a couple seconds. Does this have something to do with the textbox properties? I've set it to multiline and set maximum characters to 0 (so unlimited). How do I solve this issue? Is there some way I can see what is being called in those functions?

  Read the article

• Problem with blue-sceens

  - by Oystein

  Hi I have a problem with my computer. I get bluescreens a lot. I get different bluescreen-codes everytime, and this happens randomly. This can happen when I boot my computer, when I'm surfing on the internett, when I'm away from the computer and are logged out... I tried to disconnect everything that was connected to my computer, beside the monitor. That didn't help. I have reinstalled Windows, changed memory, changed video card, but nothing of this helped, I still get bluescreens. I guess the problem here is the mothercard, CPU or HDD. But I want your opinion before I order anything new to my computer. Can you tell me what the problem is?

  Read the article

• Minimal assembler program for CP/M 3.1 (z80)

  - by Andrew J. Brehm

  I seem to be losing the battle against my stupidity. This site explains the system calls under various versions of CP/M. However, when I try to use call 2 (C_WRITE, console output), nothing much happens. I have the following code. ORG 100h LD E,'a' LD C,2 CALL 5 CALL 0 I recite this here from memory. If there are typos, rest assured they were not in the original since the file did compile and I had a COM file to start. I am thinking the lines mean the following: Make sure this gets loaded at address 100h (0h to FFh being the zero page). Load ASCII 'a' into E register for system call 2. Load integer 2 into C register for system call 2. Make system call (JMP to system call is at address 5 in zero page). End program (Exit command is at address 0 in zero page). The program starts and exits with no problems. If I remove the last command, it hangs the computer (which I guess is also expected and shows that CALL 0 works). However, it does not print the ASCII character. (But it does print an extra new line, but the system might have done that.) How can I get my CP/M program to do what the system call is supposed to do? What am I doing wrong?

  Read the article

• Multiple Instances of aspnet_wp.exe?

  - by Mike Keller

  Is this normal? I was poking around Google and from what I found it should be, but we have 60 of them going, and only two .NET apps running on this particular server. All of them are at 0% CPU and at about 3meg of memory usage. We can't really restart the server right now to see if that clears them out, we store a lot of data on it that people need regularly. Any clues for investigating this issue would be appreciated. This particular box is an oldie Windows2000 and .NET 2.0 Thanks.

  Read the article

• Mongodump on Gridfs is killing the host IOs

  - by Raphael

  I'm trying to make a mongodump from our production mongodb while the production is running. We have three production instances, one regular mongodb, one with very few gb of data on gridfs, one with a larger amount of data on gridfs. All mongodb instances are running in version 2.4.9 on a ubuntu 10.04 virtual server. I use a mongodump command to export the bases to another server. Unfortunately our machines are virtually hosted in a "low performances" datacenter (vmware based) so when I try to export the large gridfs db, the disk IO hits 100% (and 50% of the cpu starts waiting for IO too). This has a very negative impact on the production applicatiosn because db access time is excessively increased, making the applications unusable. I'm looking for a way to regulate the mongodump so the export goes slower but cooler on the hardware ressources allowing better performances for the applications to run. Has anyone had a similar scenario ?

  Read the article

• Avoid loading unnecessary data from db into objects (web pages)

  - by GmGr

  Really newbie question coming up. Is there a standard (or good) way to deal with not needing all of the information that a database table contains loaded into every associated object. I'm thinking in the context of web pages where you're only going to use the objects to build a single page rather than an application with longer lived objects. For example, lets say you have an Article table containing id, title, author, date, summary and fullContents fields. You don't need the fullContents to be loaded into the associated objects if you're just showing a page containing a list of articles with their summaries. On the other hand if you're displaying a specific article you might want every field loaded for that one article and maybe just the titles for the other articles (e.g. for display in a recent articles sidebar). Some techniques I can think of: Don't worry about it, just load everything from the database every time. Have several different, possibly inherited, classes for each table and create the appropriate one for the situation (e.g. SummaryArticle, FullArticle). Use one class but set unused properties to null at creation if that field is not needed and be careful. Give the objects access to the database so they can load some fields on demand. Something else? All of the above seem to have fairly major disadvantages. I'm fairly new to programming, very new to OOP and totally new to databases so I might be completely missing the obvious answer here. :)

  Read the article

• problem with intel 82865 motherboard graphic driver in windows 7

  - by Sanjay Kumar Yadav

  I have cpu with Pentium 4 3GHz processor. My motherboard is Intel 82865. I have installed the graphic driver for intel 82865 by using the graphic driver of Windows XP and changing the program's compatibility to Windows XP SP2. I got many thing ok with that. For example many resolutions and I can also play GTA. But what I want to know is why I cant view Aero and transparency effect in windows 7. It says contact the manufacturer for compbatible WDDM graphic driver.

  Read the article

• fstab line for auto mount drive that all users can read/write

  - by evilblender

  I have installed a cable that connects from the CPU's SATA motherboard connection to a removable drives' ESATA connection. I would like to be able to swap drives on the ESATA connection and have all users be able to read and write to these drives. I have created the directory /archive/ where I would like the drive(s) to mount. The drives are all formatted Fat 32 - but in the future I may use HFS for formatting. When I used the command (as root): mount /dev/sdc1 /archive the drive was mounted (but read only) What can I use in my /etc/fstab file that will allow drives to be mounted and unmounted by all users on the system? (both reading and writing) Also, will I be able to mount and unmount these drives without shutting down? or will I need to reboot every time I want to change drives? Thank you. Jeff

  Read the article

< Previous Page | 373 374 375 376 377 378 379 380 381 382 383 384  | Next Page >