Search Results

Search found 18341 results on 734 pages for 'neural network'.

Page 377/734 | < Previous Page | 373 374 375 376 377 378 379 380 381 382 383 384  | Next Page >

• How to use non-free drivers during debian install

  - by blokeley

  I'm trying to install debian stable using unetbootin. The install process fails with "network autoconfiguration failed", probably due to the ethernet driver not working. My Lenovo U350 has a Broadcom BCM57780 which does not seem to be supported out-of-the-box: there are various bug reports here, here and here, but I don't know if the fix has made it into debian (6) stable. One discussion says that you have to use an ethernet driver from the firmware-linux-nonfree package. I'm not sure that this is correct because the BCM57780 is not in the list of drivers in firmware-linux-nonfree. The specific question tree is: Is BCM57780 supported in debian stable? If so, what could be wrong? Should I install debian unstable instead? If not, do I need to use firmware-linux-nonfree during installation and, if so, how do I do this? Please note: I've used ubuntu and debian loads in the past but please post line-by-line guidance rather than some cryptic abbreviation of any instructions. Thanks in advance for any help. Updates: Debian stable with non-free drivers did not work. Debian unstable (free drivers only) did not work. Tried loading firmware-iwlwifi_0.28_all.deb from another USB stick to get wireless working rather than BCM57780. The .deb file was found but the network configuration still failed! That's it, I'm giving up. Unfortunately I'll use ubuntu even though the Unity user interface will be very unstable for the next couple of years :(

  Read the article

• Setting up a virtual ftp directory that points to another computer

  - by AngryHacker

  I have II5 sitting on an old Windows 2000 Professional box. It has an FTP site there that allows me to access files. It works great, no problem at all. However, now I need to setup a virtual directory that points to a share on another computer on the network (running Windows XP Tablet Edition). The share requires a user name and password. The network is a simple workgroup (i don't have any domains or any of that). What is the correct procedure for that? I've tried setting a share via UNC and typing in the UserID/Password when asked. But when I finished, the virtual machine showed up as an error in the IIS Manager and couldn't access it. I mapped the share onto a drive and then tried to setup a virtual directory with this drive. Same result. Is there something simple I am missing? Would upgrading any part of the picture help at all?

  Read the article

• Migrate active directory to Google apps for business

  - by dewnix

  I've got a problem migrating active directory to Gapps. I'm stuck on google apps directory sync (GADS) where it just gives the error "java.lang.NullPointerException" after testing the connection during the LDAP configuration step. I checked the logs and I've pretty much determined that port 389 (standard LDAP port) isn't listening on the exchange server. I've tried telneting to it (from another machine in the same network) with no luck but I can telnet to other ports, that i know are open, successfully. I know they're open because I used portqry and netstat to see them. I'm suspecting that the active directory isn't even installed/running on this machine because there's no active directory services at all running on it. There's no active directory services that say they're NOT running either though. Is it possible AD is installed somewhere else? does it have to be on a machine inside the same network? I found the domain controller and it's host name and when I telnet with port 389, it works however GADS still gives me the same exact error when I substitute that server in. Actually, no matter what ridiculous settings i put into GADS, i still get that same NullPointer error. If i could get some different error than that NullPointer, i'd call that a successful day.

  Read the article

• My server cant resolve domains?

  - by Nuker

  I am on a VPS that is pretty much unmanaged so it means im on my own. I did my best to configure it so i can host my own site for other people to see it online but seems like i have network problems because in the last days many of my users report they cant enter my site from my domain and seems like Google and Facebook cant either (this never happened before). Its weird because i can enter my site without problems and so many other people as well. But then i tried to make a php include and i get this error: Warning: include(): php_network_getaddresses: getaddrinfo failed: Name or service not known in I was told that seems like my server cant resolve domains. The includes work if i use IPs instead of domains. So it means i have a DNS problem or something? What can i do to fix it? Im on a Linux 2.6.32-431.11.2.el6.x86_64 on x86_64 CentOS Linux 6.5 Thank you. EDIT: i have this on my resolv.conf # Generated by NetworkManager # No nameservers found; try putting DNS servers into your # ifcfg files in /etc/sysconfig/network-scripts like so: # # DNS1=xxx.xxx.xxx.xxx # DNS2=xxx.xxx.xxx.xxx # DOMAIN=lab.foo.com bar.foo.com nameserver 8.8.8.8 nameserver 8.8.4.4

  Read the article

• Logging communication between two VMs

  - by sYnfo

  Hi, I'm trying to set up "malware lab" described in this paper. So far, I've set up Windows guest system, adding one Host-only Network adapter, and setting this (sorry if the names aren't exactely correct, I don't have an english language version): - IP Address - 10.0.0.3 - Subnet mask - 255.255.255.0 - Default gateway - not set - Preferred DNS - 10.0.0.4 - Alternate DNS - not set And a Linux guest system - Ubuntu 9.04 - with two Network adapters - Bridged (eth0) and Host-only (eth1), and setting eth1 IP Address to 10.0.0.4, leaving the eth0 to be set by DHCP. Then, I have configured iptables as described in the paper, ie.: iptables -F -t nat iptables -F -t mangle iptables -t mangle -P PREROUTING ACCEPT iptables -t mangle -P OUTPUT ACCEPT iptables -t nat -P PREROUTING ACCEPT iptables -t nat -P POSTROUTING ACCEPT iptables -t nat -P OUTPUT ACCEPT iptables -t mangle -A PREROUTING -i eth0 -j ACCEPT iptables -t mangle -A PREROUTING -p udp -i eth1 -d 10.0.0.3 --dport 53 -j ACCEPT iptables -t mangle -A PREROUTING -p tcp -i eth1 --dport 80 -j ACCEPT iptables -t mangle -A PREROUTING -p tcp -i eth1 -d 10.0.0.3 --dport 6000:7000 -j ACCEPT iptables -t mangle -A PREROUTING -i eth1 -j ULOG iptables -t mangle -A PREROUTING -i eth1 -j DROP Now, when I try to ping the windows system from within the Linux system, it does not reply, I guess thats perfectly normal, because iptables is blocking ping responce. Same when I try to ping the Linux system from within the Windows. But when I try to access any web page from within the Windows system, I would expect that this action should get logged by iptables. But thing is, I don't see any of that kind of lines in log file (If I am looking in the right place, that is. :) It is at /var/log/messages, isn't it?). So, what do you think might be the problem here? I should note, that this is the first time I'm using linux, so don't expect ANY working knowledge of Linux at all... :) Also, since english is not my mother tongue, feel free to point out any gramatical mistakes... :) Thanks for any advice.

  Read the article

• Wi-Fi won't automatically connect (box in Windows configuration gets unchecked)

  - by greg88

  The checkbox that says "Use windows to configure my wireless network settings" keeps getting unchecked (Wirless Network Connection - Change advanced settings - Wireless networks tab.) How do I stop that from happening? (So the wi-fi will reconnect.) When I manually re-check the box, it automatically connects.) I have a D-Link AirPremier DWL-G550 PCI adapter. I installed the newest driver, 5.3.0.46, and that didn't solve the problem. I took the "Atheros Client Utility" (the program window says "D-Link AirPremier Client Utility" when you run it) out of the start menu, rebooted, and that didn't solve the problem. (That utility puts a signal bar similiar to the one MS Windows puts there, and it's gone now.) The D-Link client utility has an option to automatically connect to preferred networks, but it is greyed out. It is also greyed out if I install the driver and utility right off the D-Link installation CD, so the problem isn't that the utility and driver are incompatible versions. I want to use Windows to handle the connection anyway, as the D-Link utility is garbage. Windows XP SP3 w/all current updates.

  Read the article

• "merging" multiple internet connections

  - by Spencer R

  I've seen this question asked several times here on SF, but I'm looking for some updated information; specifically concerning Server 2012. I'm in the process of buying a home so I'm trying to get some plans together on how I want to structure my network. Internet speeds aren't the greatest and connections can be unreliable where the house is so I was thinking of having two DSL lines installed. My question is, how could I leverage those two connections to create the best network I can, in terms of speed and reliability. My parents will be moving in with me - they consume a lot of bandwidth as it is, but then add my internet traffic to it, and I'm headed for a lot of frustration. I thought I remember reading somewhere that Server 2012 has some new functionality to utilize multiple connections on multiple NICs in a way that wasn't possible in earlier versions of Server. Not sure if Windows will work but, I'm an application developer and spend the majority of my time in Windows environments. However, I've only recently returned to the Windows world, so I'd like my main server at home to run Win Server 2012 so that I can become more familiar with it.

  Read the article

• iPhone 3G can't see any WiFi networks, ever

  - by torbengb

  I've got WiFi turned on in the settings, and ask before connect turned off. My iPhone 3G should see several WiFi networks, but it lists none. It also does not list my own network, which my computers see just fine. It has worked earlier but stopped working recently (possibly because of or at the same time of other trouble (which a restore solved)). The iPhone is not jailbroken. The SSID is not hidden, uses WPA2. It also finds no WiFi networks when I'm at a friend's house. His iPhone 2G sees several WiFi networks, including his own. When I use the manual entry method, specifying my home SSID and the proper WPA2 passkey, then click join, the iPhone says couldn't find that network. Same at my friend's place, with his SSID and passkey. I've just backed up my iPhone, then restored it, to see if refreshing the firmware would help. It didn't change anything. Is my iPhone broken? How can I fix this?

  Read the article

• Removing Phantom Registry Entries

  - by shedd

  First, some background: I'm trying to install an HP OfficeJet 6500. I've got the printer setup on my network fine, but the driver software installation on Windows XP (SP3) is a PITA. The installation program keeps dying with the following error: Product: Network -- Error 1324. The folder path 'WD Sync Data' contains an invalid character. WD Sync Data is a program on external Western Digital harddrives, which I used to use on this computer, but no external drive is current mounted. I've searched my registry for those keywords, but haven't found anything. I also ran CCleaner on the registry just to make sure, but no loose ends detected there, either. There are a number of Google results for the error, but no solutions. One post pointed me to the Windows Installer Cleanup Utility, but this utility doesn't even run - it dies with the same error before even starting. Any thoughts on where I could look to clean up this invalid character so I can get the HP installation wizard to successfully run? Many thanks in advance!

  Read the article

• Windows 7 Sharing issue on RAID 5 Array(s)

  - by K.A.I.N

  Greetings all, I'm having a very odd error with a windows 7 ultimate x64 system. The network system setup is as follows: 2x XP Pro 32 Bit machines 1x Vista ultimate x64 machine 2x Windows 7 x64 Ultimate machines all chained into 1x 16 port netgear prosafe gigabit switch, the windows 7 & vista machines are duplexed. Also there is a router (netgear Rangemax) chained off the switch I am basically using one of the windows 7 machines to host storage & stream media to other machines. To this end i have put 2x 3tb hardware RAID 5 arrays in it and assorted other spare disks which i have shared the roots of. The unusual problems start when i am getting Access denied, Please contact administrator for permission blah blah blah when trying to access both of the RAID 5 arrays but not the other stand alones. I have checked the permission settings, i have added everyone to the read permission for the root, i have tried moving things into sub directories then sharing them. I have tried various setting combinations in HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa and always the same. I have tried flushing caches all round, disabling and re-enabling shares & sharing after restart as well as several other things & the result is always the same... No problem on individual drives but access denied on both the RAID arrays from both XP & Vista & Windows 7 machines. One interesting quirk that may lead to an answer is that there is no "offline status" information regarding the folders when you select the RAID 5s from a windows 7 machine yet there is on the normal drives which say they are online. It is as if the raid is present but turned off or spun down but as far as i was aware windows will spin an array back up on network request and on the machine itself the drives seem to be online and can be accessed. Have to admit this has me stumped. Any suggestions anyone? Thanks in advance for any fellow geek assistance. K.A.I.N

  Read the article

• BIND9 Forwarding by view

  - by Triztian

  Hi I think this is a simple issue, I'd like to forward only to certain IPs in the LAN network, for example I have 2 acl lists: acl "office1" { 192.168.1.15; // With internet access }; acl "production" { 192.168.1.101; // No internet access }; I know that there probably should be more efficient ways to restrict internet access, but at the moment this is what I'd like to try.Here's what I've tried in named.conf.local // Inlcude my acl definitions include "/etc/bind/acls.conf"; view "no-internet" { match-clients { production; }; include "/etc/bind/named.conf.default-zones"; zone "localdomain.com" { type master; file "/etc/bind/db.localdomain.com"; }; zone "1.168.192.in-addr.arpa" { type master; file "/etc/bind/db.192.168.1"; }; } view "internet" { match-clients { office1; }; include "/etc/bind/named.conf.default-zones"; forwarders { 201.56.59.14; // Made Up 201.56.59.15; // Made Up }; zone "localdomain.com" { type master; file "/etc/bind/db.localdomain.com"; }; zone "1.168.192.in-addr.arpa" { type master; file "/etc/bind/db.192.168.1"; }; }; As you can see I want a localdomain.com defined for every computer in my network and forward internet access to the computers in the office but not to the ones on the production floor. I've modified my conf file, however the IP in the "no-internet" acl is able to resolve the domains, even though I've rebooted the computer, flushed the DNS using ipconfig /flushdns and set my DNS Server as the only one, why is this still happening? Thanks in advance.

  Read the article

• Asterisk relay between multiple subnets

  - by immoune

  I wonder what's the best way to go when you have phones on multiple networks which are not directly reachable. I have 3 networks 10.3.x.x 10.6.x.x 10.17.x.x My asterisk server resides on the 10.3.0.5 IP. The machines from the 10.6 and 10.17 networks are routed here through VPN tunnels. At this point we don't talk about NAT anywhere on the network just pure routing. Since the 10.3.0.5 PBX has routes back to all the subnet's it has no problem to communicate with softphones/hardphones from these ranges. The problem comes from that Asterisk (as far as I understand) only responsible for the SIP communication part not the Audio/Video transmission which is in P2P fashion done between the devices. So although a client using sipdroid from 10.6.x.x is able to connect to the pbx (10.3.0.5) and dial a bria client on the 10.17.x.x network once the phone rings out and the call establishes no audio will be transmitted simply because it has no way to directly connect there. For this there are multiple solutions described in this text: http://msdn.microsoft.com/en-us/library/ee480411%28v=winembedded.60%29.aspx What I would prefer is to keep these networks segregated as they are now. What would be the best solution? Is it possible to actually relay through all the audio/video information through the Asterisk server? That would be the best in my case, I using Astlinux there which has a lot of other parts. Thanks

  Read the article

• LMDE detects a wireless card, but can't use it

  - by Davidos

  LMDE can see my wireless card, and correctly identifies it, but it refuses to let me turn it on through the shiny graphical interface. Is there a way to use the non-shiny terminal to turn on my wireless? One small tidbit I noticed was the stated version; it says the version is 00. I believe that's hexadecimal for 0, which may indicate something screwy with the software. It would be nice if someone could tell me how to figure out how to solve this kind of problem in the future. *-network DISABLED description: Wireless interface product: Centrino Wireless-N 1000 vendor: Intel Corporation physical id: 0 bus info: pci@0000:09:00.0 logical name: wlan0 version: 00 serial: 91:e3:7b:0d:a3:a9 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlagn driverversion=3.0.0-1-amd64 firmware=39.31.5.1 build 35138 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:43 memory:e1d00000-e1d01fff I've tested multiple other network managers, and none of them work. W ireless switch is on, I'm sure it's a driver problem.

  Read the article

• How many connections are allowed to a Windows 7 Home Premium shared folder or printer?

  - by lcbrevard

  I have a client who runs a small business with 4 desktop systems, two of which are inexpensive [ The XP Pro system is currently being used as a file "server" for time sheets and QuickBooks data. It also shares an HP ink jet printer. The client wishes to decommission this system because (1) it's ugly [it is] and (2) it uses too much power [it does]. If we share a folder on one of the Windows 7 Home Premium systems will there be a problem connecting to it with up to 3 other computers? What about the printer sharing? I vaguely remember seeing that Windows 7 is less usable for "server" purposes and has severe restrictions on the number of clients. But I cannot seem to find those numbers. In my own network (over 12 systems) we have no problem sharing from Windows 7 Ultimate to a few other systems where needed. I am embarrassed that I cannot seem to find the answer to this in a couple of days of searching. I can do an anytime upgrade of one of these systems to Pro if that would improve the ability to share from it. I am not able to convince the client to put a "real server" into their network.

  Read the article

• How many connections are allowed to a Windows 7 Home Premium shared folder or printer?

  - by lcbrevard

  I have a client who runs a small business with 4 desktop systems, two of which are inexpensive [ The XP Pro system is currently being used as a file "server" for time sheets and QuickBooks data. It also shares an HP ink jet printer. The client wishes to decommission this system because (1) it's ugly [it is] and (2) it uses too much power [it does]. If we share a folder on one of the Windows 7 Home Premium systems will there be a problem connecting to it with up to 3 other computers? What about the printer sharing? I vaguely remember seeing that Windows 7 is less usable for "server" purposes and has severe restrictions on the number of clients. But I cannot seem to find those numbers. In my own network (over 12 systems) we have no problem sharing from Windows 7 Ultimate to a few other systems where needed. I am embarrassed that I cannot seem to find the answer to this in a couple of days of searching. I can do an anytime upgrade of one of these systems to Pro if that would improve the ability to share from it. I am not able to convince the client to put a "real server" into their network.

  Read the article

• Sizing Switches for Storage and Production

  - by Untalented

  Couple questions. Should you always completely separate the storage network switches from production switches or are VLANs fine to segment this traffic? Is there a golden rule here? How do you properly size a switch for your environment based on the specifications the manufacturer provide (Throughput, Forwarding Throughput, Stacking Throughput, Max Mac)? If you have two switch options and one has a maximum Mac address of 8,000 vs. another with 16,0000. What does this really mean to me? How do make sure one vs. another is sized properly for me? Besides VLAN and Jumbo Frame support, is there any other "Must" haves for a virtual environments production or storage networks? There is a wealth of knowledge on sizing SANs and such, but this seems equally important and it's quite challenging to find as much information. -- Just to add some tidbits of information for the environment. This setup above is referring to the data centers which supports two different locations which have about 100 users between the two in total. The storage traffic will be iSCSI and will be 3 ESXi Hosts and one SAN housing about 2.7TB of data. Since there is currently no storage network in place (no SAN), I'm having a hard time regarding #2 to really determine what backplane throughput and switch specifications will be sufficient.

  Read the article

• Local traffic through VPN, global traffic through WAN

  - by ikonoma

  I have an issue with my internet connection. I am using VPN (Aventail Client) to access the local resources. When connected to VPN the Internet traffic passes through it, not through my LAN or Wi-Fi network. I would like to change the routing table to use the Wi-Fi adapter of the PC for WAN traffic. I have routing file, which works very well and routes the traffic in this way, but only when I am physically connected to the local network through LAN. But I can't set it to work with the VPN connection, because I have no gateway when I am connected to it. Etc this in bold is missing. What to do? route change 0.0.0.0 mask 0.0.0.0 172.16.76.1 metric 200 if 12 route change 0.0.0.0 mask 0.0.0.0 10.44.2.1 metric 400 if 11 route add 150.251.0.0 mask 255.255.0.0 10.44.2.1 metric 100 if 11 route add 10.0.0.0 mask 255.0.0.0 10.44.2.1 metric 100 if 11 pause

  Read the article

• Windows Update broke Wirless driver - Can't get it working again

  - by private_meta

  I naively installed a driver update incoming from Windows Updates yesterday. That caused my Wifi on my Notebook (HP ELitebook 2740p) to break. The network is working as I tried it with my other mobile devices. When installing said driver, it told me that the installation failed. I tried to do a system restore, which did not help getting wifi connectivity back. The device said it was working, but did not get any wifi connection and did not discover any networks. What I tried next was to uninstall the device from my Device Manager and install either the current drivers found through windows, then I tried the same with the current drivers on the HP driver page. both of those attempts failed. It always tells me that installation failed when I uninstall and reinstall drivers. If I try to update the broken driver via internet, it tells me it is up to date, and in the device manager it still views as broken. Next, I 'played' around a bit and reinstalled drivers, and I managed to install drivers from 2012, and when trying to update drivers manually and picking drivers that match the device, it lets me choose between drivers from 2010 and 2014. 2014 would be the current one, picking the 2010 driver leads to the driver being accepted. However, no wireless network can be found. I'm pretty much out of ideas by now, short of reinstalling. The only option I can still think of was that the device broke at the exact moment I installed the new windows driver, but I find that a bit unlikely. Any help would be appreciated fixing this issue.

  Read the article

• Routing Traffic With OpenVPN

  - by user224277

  Few minutes ago i configured my VPN server, and actually I can connect to my VPN but all trafic is going through my normal home network. On my OpenVPN application I've got an information : Server IP: **.185.***.*10 Client IP: 10.8.0.6 Traffic: 7.3 KB in, 5.6 KB out Connected: 10 June 2014 19:21:59 So everything is connected but how I can setup on windows 7 that all trafic have to go through OpenVPN network card ?? Client setting : client dev tun proto udp # enter the server's hostname # or IP address here, and port number remote **.185.***.*10 1194 resolv-retry infinite nobind persist-key persist-tun # Use the full filepaths to your # certificates and keys ca ca.crt cert user1.crt key user1.key ns-cert-type server comp-lzo verb 6 Server setting : port 1194 proto udp dev tun # the full paths to your server keys and certs ca /etc/openvpn/keys/ca.crt cert /etc/openvpn/keys/server.crt key /etc/openvpn/keys/server.key dh /etc/openvpn/keys/dh2048.pem cipher BF-CBC # Set server mode, and define a virtual pool of IP # addresses for clients to use. Use any subnet # that does not collide with your existing subnets. # In this example, the server can be pinged at 10.8.0.1 server 10.8.0.0 255.255.255.0 # Set up route(s) to subnet(s) behind # OpenVPN server push "dhcp-option DNS 8.8.8.8" push "dhcp-option DNS 8.8.4.4" ifconfig-pool-persist /etc/openvpn/ipp.txt keepalive 10 120 status openvpn-status.log verb 6 and sysctl : net.ipv4.ip_forward=1 Thank you for your time and help.

  Read the article

• Different behaviour when running exe from command prompt than in windows

  - by valoukh

  Forgive me if I'm not using the correct terminology here but I'll try to explain the issue I'm having as best I can! We use a program that allows you to view video footage from several cameras, and it works in such a way that when it is opened it then automatically loads several video files within its interface. These video files are stored in a subfolder, e.g. "videos\video1.asf", etc. I didn't create the program so I can't say what method it uses to open the files. The files are stored on a network server and are being accessed via a share/UNC path. When the file is run from windows explorer (by navigating to the network share and double-clicking the exe), it works perfectly. When the file is run via the (elevated) command prompt (e.g. by typing the \server\path\to\file.exe) it opens, but the corresponding video files do not load. I am trying to create a script that launches the program via the command prompt, so the first step is finding out why the two actions above have different consequences. Any advice on how running executables from the command prompt could produce a different result would be greatly appreciated. Thanks

  Read the article

• Directory service unavailiable, new hardware same settings

  - by Alex

  I'm working on a project with 2 sites connected by a VPN. Site 1 has the main server and there is a secondary server at site 2 which I am trying to replace. The current setup works perfectly however I can't for the life of me get the replacement server at site 2 up and running. I'm trying to replace like for like just upgraded hardware. I have installed the OS (all Server 2003 Standard SP2) and used exactly the same settings as the old server. I have setup Active Directory, DNS Server, DHCP Server and WINS Server configured. I have used all the same settings as the old server (except IP address and name). I can access the active directory but I can't do anything; add, edit, delete all returns "the directory service is unavaliable". No-one can login on any of the computers on site 2 and the internet is down. Plugging the old server back in and connecting it to the network rectifies the issue (so both new and old are connected at site 2), everyone can login and the internet is back (curious since the modem connects direct to the switch, and even with the new server online I can connect to the router via IP but not the net). I really don't have much experience but I've been roped into doing this because my company is too cheap to hire a real network admin. Any suggestions of where I can start to troubleshoot this, its driving me crazy and I only have a day before all the users are back on site.

  Read the article

• Trying to migrate old server to new. Getting duplicate name errors

  - by SpaceCowboy74

  I have an existing server on my network that is running under windows 2000 with SQL Server 2000 on it. We are in the process of moving the server to a windows 2008 platform, with SQL 2008 as well. A few changes are happening though. For one, applications that were on the old server, will now be on a new application server. The issue is, the developers of the original applications hard coded the server name in the apps and/or batch files. I could change all the code, but that would require weeks of work. My original idea was to change the hosts and lmhosts files to point to the new servers with a different IP. So i implemented the following where oldserver was the original server and server is the new one brought online: hosts: 192.168.1.10 oldserver 192.168.1.15 server lmhosts: 192.168.1.10 oldserver #pre 192.168.1.15 server #pre Problem is, when i try to do this, i get the following errors: \\server\c$ Logon Failure : The target account name is incorrect. and \\oldserver\c$ A duplicate name exists on the network. I know about renaming servers in AD, but can't do so yet as the original server is in production and i cannot rename it without breaking a lot of things at the moment. I'm wanting to do a proof of concept to the management before renaming the servers. Any idea how i should resolve this?

  Read the article

• Why won't sql server express 2008 service restart after I enable TCP/IP Protocol?

  - by John

  Whenever I enable TCP/IP connections on my SQL Server Express 2008 database server running on Windows XP SP3, I cannot restart the service, it simply states "The request failed or did respond in a timely fashion". Any suggestions of what I may have configured incorrectly? [update] Here is the applicable part of the Error Log: MSSQL$SQLEXPRESS Server failed to list on 'any' 3060. Error: 0x2747. To proceed, notify you system administrator. MSSQL$SQLEXPRESS TDSSNIClient initialization failed with error 0x2747, status code 0xa. Reason: Unable to initialize the TCP/IP listener. An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full. MSSQL$SQLEXPRESS TDSSNIClient initialization failed with error 0x2747, status code 0x1. Reason: Initialization failed with an infrastructure error. Check for previous errors. An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full. MSSQL$SQLEXPRESS Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log. MSSQL$SQLEXPRESS SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.

  Read the article

• Windows-7 Ultimate 64 bit wont connect to my wired/wireless networks

  - by A302

  Windows 7 Ultimate 64 bit. Everything was working fine & then just stopped working. The nic card Realtek PCIe GBE Family Controller is enabled but does not connect to my router (cables & router ports are good). Wireless Atheros AR5007EG is enabled but the connection is limited (encryption type / key have been verified). A laptop running XP can connect both wired / wireless. SSID is not being broadcast, connect to network if it is not broadcasting is checked. Have checked services.msc for Bonjour & did not see it listed. Network & sharing center does not list any active networks. Device manager lists both devices as functioning properly. Router configuration has not been changed. Virus scan has not found anything. I would like to fix this rather than using Acronis to do a system restore. Thanks in advance for any advice offered in solving this. 26 Jan, the nic card & wireless are working using PCLinux OS Live CD. It appears that the problem is Windows 7 related.

  Read the article

• How to set up vpn tunnel (ipsec) connection

  - by Alfwed

  I'm working with a client who wants to set up a vpn tunnel between their network and ours. They're in charge of the tunnel and to give us the access they are asking me my public IP and my LAN IP. This is what i've got when i do an ifconfig on the server i will use to connect to the vpn $ ifconfig eth0 Link encap:Ethernet HWaddr d4:ae:52:cd:xx:xx inet adr:62.210.xxx.xxx Bcast:62.210.xxx.xxx Masque:255.255.255.0 adr inet6: fe80::d6ae:52ff:xxxx:xx/64 Scope:Lien UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Packets reçus:55255032 erreurs:0 :779628 overruns:0 frame:0 TX packets:5419527 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:1000 Octets reçus:5598164393 (5.5 GB) Octets transmis:1034297288 (1.0 GB) Interruption:16 Mémoire:c0000000-c0012800 lo Link encap:Boucle locale inet adr:127.0.0.1 Masque:255.0.0.0 adr inet6: ::1/128 Scope:Hôte UP LOOPBACK RUNNING MTU:16436 Metric:1 Packets reçus:45923382 erreurs:0 :0 overruns:0 frame:0 TX packets:45923382 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:0 The inet adr:62.210.xxx.xxx is my public IP but it seems like i dont have any LAN IP. Can the connection work without LAN IP or should I create a private network somehow?

  Read the article

< Previous Page | 373 374 375 376 377 378 379 380 381 382 383 384  | Next Page >