Search Results

Search found 45469 results on 1819 pages for 'open source contributions'.

Page 377/1819 | < Previous Page | 373 374 375 376 377 378 379 380 381 382 383 384  | Next Page >

  • Can't connect to vsftpd on Ubuntu 10.04

    - by Johnny
    I started the vsftpd on Ubuntu 10.04, but can't connect to it. The error says(FTP Client): Status: Connecting to 124.205.xx.xx:21... Error: Connection timed out Error: Could not connect to server I've checked the server status, and vsftpd is running: $ ps ax | grep vsftpd 23646 ? Ss 0:00 /usr/sbin/vsftpd 23650 pts/1 S+ 0:00 grep --color=auto vsftpd port 21 is under listening as well: $ netstat -tlnp | grep 21 (No info could be read for "-p": geteuid()=1000 but you should be root.) tcp 0 0 0.0.0.0:21 0.0.0.0:* LISTEN - I can connect to localhost: $ ftp localhost Connected to localhost. 220 (vsFTPd 2.2.2) Name (localhost:jlee): 331 Please specify the password. Password: 230 Login successful. Remote system type is UNIX. Using binary mode to transfer files. ftp> Here is iptables output $ sudo iptables -vL Chain INPUT (policy ACCEPT 191 packets, 144K bytes) pkts bytes target prot opt in out source destination Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 124 packets, 28502 bytes) pkts bytes target prot opt in out source destination What's the problem here?

    Read the article

  • How do ulimit -n and /proc/sys/fs/file-max differ?

    - by bantic
    I notice that on a new CentOS image that I just booted up off of EC2 that the ulimit default is 1024 open files, but /proc/sys/fs/file-max is set at 761,408 and I'm wondering how these two limits work together. I'm guessing that ulimit -n is a per-user limit of number of file descriptors while /proc/sys/fs/file-max is system-wide? If that's the case, say I've logged in twice as the same user -- does each logged-in user have a 1024 limit on number of open files, or is it a limit of 1024 combined open files between each of those logged-in users? And is there much performance impact to setting your max file descriptors to a very high number, if your system isn't ever opening very many files?

    Read the article

  • How to access previous VHD versions of system backup?

    - by feklee
    Quote from the 31 Oct 2009 TechNet article "Learn more about system image backup": During the first backup, the backup engine scans the source drive and copies only blocks that contain data into a .vhd file stored on the target, creating a compact view of the source drive. The next time a system image is created, only new and changed data is written to the .vhd file, and old data on the same block is moved out of the VHD and into the shadow copy storage area. Volume Shadow Copy Service is used to compute the changed data between backups, as well as to handle the process of moving the old data out to the shadow copy area on the target. This approach makes the backup fast (since only changed blocks are backed up) and efficient (since data is stored in a compact manner). When restoring the image, blocks will be restored to their original locations on the source disk. If you want to restore from an older backup, the engine reads from the shadow copy area and restores the appropriate blocks. For the last days, a daily system backup of drive C: to drive E: has been scheduled and run by Windows 7 Backup and Restore. Drive C: currently holds 233 GB of data, which fits comfortably on drive E:, a 1 TB drive, with 727 GB of free space remaining. How do I access the previous version of a VHD? I right clicked on files and folders in E:\WindowsImageBackup, and I looked for Previous Versions but always: There are no previous versions available

    Read the article

  • Error compiling PHP 5.5.9 on CentOS 6.5 during make command

    - by Chris Mancini
    Here is the error message: cc: internal compiler error: Killed (program cc1) Please submit a full bug report, with preprocessed source if appropriate. See <file:///usr/share/doc/gcc-4.6/README.Bugs> for instructions. make: *** [ext/fileinfo/libmagic/apprentice.lo] Error 1 The very last thing make was processing is apprentice.lo which appears to be part of the image manipulation libraries (maybe?). I am using Ansible to provision my instance. It is a Digital Ocean single core 512MB VM. I have been using vagrant / ansible with the same config locally for dev and it has compiled fine, this is the first cloud VM I am attempting to provision. The only difference is the base image for my DO server is coming from DO and for my local dev, I built my own Vagrant box via VirtualBox from a stock CentOS basic server install. I pull it down from my DropBox. The problem has been experienced by others and reported as a php bug report My php ansible role up to the error: --- - name: Download php source get_url: url={{ php_source_url }} dest=/tmp register: get_url_result - name: untar the source package command: tar -xvf php-{{ php_version }}.tar.gz chdir=/tmp when: get_url_result.changed or php_reinstall - name: configure php 5.5 command: > ./configure --prefix={{ php_prefix }} --with-config-file-path={{ php_config_file_path }} --enable-fpm --enable-ftp --enable-mbstring --enable-pdo --enable-soap --enable-sockets=shared --enable-zip --with-curl --with-fpm-group={{ nginx_group }} --with-fpm-user={{ nginx_user }} --with-freetype-dir=/usr/lib64/ --with-gd --with-jpeg-dir=/usr/lib64/ --with-libdir=lib64 --with-mcrypt --with-openssl --with-pdo-mysql --with-pear --with-readline --with-tidy --with-xsl --with-zlib --without-pdo-sqlite --without-sqlite3 chdir=/tmp/php-{{ php_version }} when: get_url_result.changed or php_reinstall - name: make clean when reinstalling command: make clean chdir=/tmp/php-{{ php_version }} when: php_reinstall - name: make php command: make chdir=/tmp/php-{{ php_version }} when: get_url_result.changed or php_reinstall Thanks in advance for any help. :)

    Read the article

  • Annotation of a pdf file in my dropbox in ipad and keep it the last version in dropbox

    - by Farshid
    I have a folder in my dropbox that i keep my ebooks in it. I want to find an app in ipad that can do these to me: Let me open a pdf file from my dropbox Let me annotate on that file Annotation getting applied to the dropbox version of my file, instead of creating a local copy that its changes does not affect the dropbox version In my pc, when i open a pdf file from my dropbox and make Some highlights, when i press the save button in acrobat reader, the dropbox version is instantly gets updated and whenever i open my dropbox folder i have the latest version of the file. I need similar functionality in my ipad. What ipad app do you recommand for gaining this functionality?

    Read the article

  • ms access template where to find the vb code

    - by tintincutes
    I'm very new to this ms access 2007. I have a copy of a charitable contribution template charitablecontributions.accdb. I would like to know where I can find the code of it? I opened it by holding down the shift button and double click on it and it will open to a normal ms access where you can modify the table and so. But when I just click the file: charitablecontributions.accdb it will open to a formular view where the ribbon bars are gone. I wanted to know how, how is it possible to have this formular view? Because I have a Test.mdb from 2003 and I also would like it to be open like the formular view of charitablecontributions.accdb. I'll appreciate your help. Thanks

    Read the article

  • iptables -- OK, **now** am I doing it right?

    - by Agvorth
    This is a follow up to a previous question where I asked whether my iptables config is correct. CentOS 5.3 system. Intended result: block everything except ping, ssh, Apache, and SSL. Based on xenoterracide's advice and the other responses to the question (thanks guys), I created this script: # Establish a clean slate iptables -P INPUT ACCEPT iptables -P FORWARD ACCEPT iptables -P OUTPUT ACCEPT iptables -F # Flush all rules iptables -X # Delete all chains # Disable routing. Drop packets if they reach the end of the chain. iptables -P FORWARD DROP # Drop all packets with a bad state iptables -A INPUT -m state --state INVALID -j DROP # Accept any packets that have something to do with ones we've sent on outbound iptables -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT # Accept any packets coming or going on localhost (this can be very important) iptables -A INPUT -i lo -j ACCEPT # Accept ICMP iptables -A INPUT -p icmp -j ACCEPT # Allow ssh iptables -A INPUT -p tcp --dport 22 -j ACCEPT # Allow httpd iptables -A INPUT -p tcp --dport 80 -j ACCEPT # Allow SSL iptables -A INPUT -p tcp --dport 443 -j ACCEPT # Block all other traffic iptables -A INPUT -j DROP Now when I list the rules I get... # iptables -L -v Chain INPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 0 0 DROP all -- any any anywhere anywhere state INVALID 9 612 ACCEPT all -- any any anywhere anywhere state RELATED,ESTABLISHED 0 0 ACCEPT all -- lo any anywhere anywhere 0 0 ACCEPT icmp -- any any anywhere anywhere 0 0 ACCEPT tcp -- any any anywhere anywhere tcp dpt:ssh 0 0 ACCEPT tcp -- any any anywhere anywhere tcp dpt:http 0 0 ACCEPT tcp -- any any anywhere anywhere tcp dpt:https 0 0 DROP all -- any any anywhere anywhere Chain FORWARD (policy DROP 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 5 packets, 644 bytes) pkts bytes target prot opt in out source destination I ran it and I can still log in, so that's good. Anyone notice anything major out of wack?

    Read the article

  • Firefox: getting access to the list of tabs/windows to restore on startup

    - by robb
    Sometimes Firefox fails to restore the previously open tabs/windows. This might be happening when some of the URLs to be opened are no longer reachable (e.g. behind a VPN) or after the underlying OS (Windows) has been forcibly restarted (e.g. to complete an automated patch installation). Anyway, after restarting, can this list of URLs be recovered somehow? Say for example, I was daft enough to have clicked on "start new session". Can I still get access to the old list of open URLs? There is the browser history of course, but it contains a lot of stuff - the URLs that were open when Firefox last exited are not obvious. It would be neat if they were marked in some way - tagged for example.

    Read the article

  • How do I stop track changes from turning on automatically in Word 2007

    - by Benj
    Whenever I open an existing document in Word 2007 (on Windows XP), word turns on track changes, and changes the display mode to "Final" (that is, not "Final Showing Markup" -- so I often don't even notice track changes is on if I don't remember to pay attention. This happens for ALL existing documents, and doesn't happen for new documents. I can't find any option in the configuration that would control this behavior. I would like to restore the original/default behavior where documents are opening with Track Changes off, and in "Final showing markup" display. Steps to Reproduce Open Word 2007. Create a new document. Verify that track changes is off. Save the document and close Word. Open the document (either directly or through Word). Track changes is now on. Any ideas?

    Read the article

  • TCP 3 way handshake

    - by Tom
    Hi, i'm just observing what NMAP is doing for the 3 ports it reports are open. I understand what a half-scan attack is, but what's happening doesnt make sense. NMAP is reporting ports 139 are 445 are open..... all fine. But when i look at the control bits, NMAP never sends RST once it has found out the port is open, It does this for port 135- but not 139 and 445. This is what happens: (I HAVE OMITTED THE victim's replies) Sends a 2 (SYN) Sends a 16 (ACK) Sends a 24 (ACK + PST) Sends a 16 (ACK) Sends a 17 (ACK + FIN) I dont get why NMAP doesnt 'RST' ports 139 and 445??

    Read the article

  • Iptables ignoring a rule in the config file

    - by Overdeath
    I see lot of established connections to my apache server from the ip 188.241.114.22 which eventually causes apache to hang . After I restart the service everything works fine. I tried adding a rule in iptables -A INPUT -s 188.241.114.22 -j DROP but despite that I keep seeing connections from that IP. I'm using centOS and i'm adding the rule like thie: iptables -A INPUT -s 188.241.114.22 -j DROP Right afther that I save it using: service iptables save Here is the output of iptables -L -v ` Chain INPUT (policy ACCEPT 120K packets, 16M bytes) pkts bytes target prot opt in out source destination 0 0 DROP all -- any any lg01.mia02.pccwbtn.net anywhere 0 0 DROP all -- any any c-98-210-5-174.hsd1.ca.comcast.net anywhere 0 0 DROP all -- any any c-98-201-5-174.hsd1.tx.comcast.net anywhere 0 0 DROP all -- any any lg01.mia02.pccwbtn.net anywhere 0 0 DROP all -- any any www.dabacus2.com anywhere 0 0 DROP all -- any any 116.255.163.100 anywhere 0 0 DROP all -- any any 94.23.119.11 anywhere 0 0 DROP all -- any any 164.bajanet.mx anywhere 0 0 DROP all -- any any 173-203-71-136.static.cloud-ips.com anywhere 0 0 DROP all -- any any v1.oxygen.ro anywhere 0 0 DROP all -- any any 74.122.177.12 anywhere 0 0 DROP all -- any any 58.83.227.150 anywhere 0 0 DROP all -- any any v1.oxygen.ro anywhere 0 0 DROP all -- any any v1.oxygen.ro anywhere Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 186K packets, 224M bytes) pkts bytes target prot opt in out source destination `

    Read the article

  • Is it possible to use Linux to route between my office (which uses IPSec) and home network?

    - by Sam
    First of all, apologies if this seems vague - I'm not an admin of anything more than a home network. I have a Ubuntu box sitting on my network which does various odd tasks for me - svn serving, some file serving, Apache/MySQL/PHP which is all raring to go. I've started a new job and at the moment I'm using ShrewSoft VPN software to establish a VPN link to the office as I need it. I'd prefer to have something always running on my home network just for convenience. My home modem/router doesn't support holding a VPN connection open. What I would like to do is set up my Linux box to hold open a VPN connection to my office and keep it open permanently, and then all applicable traffic for the office be routed through this box. I'm not sure if this is possible, or how to configure the routing on the desktop PCs (Windows 7). Would appreciate any guides, etc that could help me out.

    Read the article

  • How do I prevent a tar pipe from causing swapping?

    - by Jeff Shattock
    I have a rather large filesystem that I need to transfer from one Linux server to another. I figured the best way to do this was via a tar/netcat pipe arrangment, something like tar c . | pv | nc blah blah blah And it works great, the network stays fairly saturated, life is good. Until the source machine starts swapping. The files are on a raid on the source system, so the read speed is much faster than the write speed on the other end. Since the dest machine hasnt picked up the data yet, the source machine needs to stick it somewhere, so into RAM it goes, until there is no more free RAM. It then starts swapping, which is horribly painful since that machine has its OS installed on a somewhat slow CF card. Both machines have 4GB of physical ram, 64 bit Ubuntu 9.04 server. GigE link between them. How do I prevent this swapping? Can I put a "speed-limit" on the tar or netcat process so that the transfer speed doesn't overwhelm the write throughput on the destination end? The man pages didn't list anything, but there might be something I'm overlooking.

    Read the article

  • SNMP closed state in CentOS

    - by anksoWX
    I'm having a problem here, I've added to my IPtables rules this: -A INPUT -p tcp -m state --state NEW -m tcp --dport 161 -j ACCEPT -A INPUT -p udp -m state --state NEW -m udp --dport 161 -j ACCEPT but when I scan with nmap or any other tool it says this: Not shown: 998 filtered ports PORT STATE SERVICE 22/tcp open ssh 161/tcp closed snmp also when I am doing: netstat -apn | grep snmpd tcp 0 0 127.0.0.1:199 0.0.0.0:* LISTEN 3669/snmpd<br> udp 0 0 0.0.0.0:161 0.0.0.0:* 3669/snmpd<br> unix 2 [ ] DGRAM 226186 3669/snmpd Also: service iptables status Table: filter Chain INPUT (policy ACCEPT) num target prot opt source destination 1 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 2 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 3 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 4 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:161 5 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 state NEW udp dpt:161 6 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:22 7 REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-host-prohibited Chain FORWARD (policy ACCEPT) num target prot opt source destination 1 REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-host-prohibited Chain OUTPUT (policy ACCEPT) num target prot opt source destination Any idea what's going on? There is no UDP in closed/open state. what do I have to do?

    Read the article

  • Vyatta masquerade out bridge interface

    - by miquella
    We have set up a Vyatta Core 6.1 gateway on our network with three interfaces: eth0 - 1.1.1.1 - public gateway/router IP (to public upstream router) eth1 - 2.2.2.1/24 - public subnet (connected to a second firewall 2.2.2.2) eth2 - 10.10.0.1/24 - private subnet Our ISP provided the 1.1.1.1 address for us to use as our gateway. The 2.2.2.1 address is so the other firewall (2.2.2.2) can communicate to this gateway which then routes the traffic out through the eth0 interface. Here is our current configuration: interfaces { bridge br100 { address 2.2.2.1/24 } ethernet eth0 { address 1.1.1.1/30 vif 100 { bridge-group { bridge br100 } } } ethernet eth1 { bridge-group { bridge br100 } } ethernet eth2 { address 10.10.0.1/24 } loopback lo { } } service { nat { rule 100 { outbound-interface eth0 source { address 10.10.0.1/24 } type masquerade } } } With this configuration, it routes everything, but the source address after masquerading is 1.1.1.1, which is correct, because that's the interface it's bound to. But because of some of our requirements here, we need it to source from the 2.2.2.1 address instead (what's the point of paying for a class C public subnet if the only address we can send from is our gateway!?). I've tried binding to br100 instead of eth0, but it doesn't seem to route anything if I do that. I imagine I'm just missing something simple. Any thoughts?

    Read the article

  • Using a nat rule to translate 80/443 traffic to web server, but internal users cannot access it using external ip/domain name

    - by Josh
    I am using Cisco ASDM for ASA I have my internal network called soa. My outside interface is called outside. Let's say my outside IP given to me by my ISP isp is y.y.y.y I have a web server inside my network with a static ip of x.x.x.110. I have configured 2 static nat rules (one for http the other for https). Source is x.x.x.110. Interface is outside, service (http or https). Maybe I am doing this wrong, but when I run the packet tracer, I choose outside interface and for the source IP I used 8.8.8.8 and the destination ip is my outside IP address, y.y.y.y When I run that, it shows the packet traversing successfully, using 9 steps. For my other test, I switch to the soa interface, input an ip on that network, and leave the destination the same. This test comes up with 2 steps and then fails on my access list. When I see the rule that fails, it is my catch all which is source: any desitnation: any, service: ip action: deny. What rule do I need to make to allow my soa network access to go out and come back in by my external IP addess (using a domain name attached to that ip in my dns, of course)?

    Read the article

  • Weird Apache behaviour and with files again

    - by afifio
    Hi and thanks for stopping by. I have read Weird Apache problem with file, I have read Weird Apache problem with file ...and its not the problem Setup single XAMPP installation on Windows, single windows user, 2HD, 1 is a portable USB. All is fine, until I move the xampp to new portable HD Symptom Old php files - works fine, new one doesnt http://127.0.0.1/Ajax/index.php - yay http://127.0.0.1/test2/t.php - display the source code http://127.0.0.1/Ajax/test2/t.php - display the source code http://127.0.0.1/Ajax/t.php - display the source code Extra Info IIS+MS Web Development stuff, .NET4, Asp, etc is being installed and still hast reboot yet. .htaccess also seems doesnt work Apache2 conf file was modified to Averride All and still it doesnt care. One of the directory supposed to treat .htm as php yet got text, created another directory and edit a phpinfo, still another text, browse to phpmyadmin, viola, works fine Suspect Does Apache honour XP security and permission ? If so, this is a single user computer. Does Apache dont like my new hard disk/new place ? Why it doesnt execute the php in new directory but happily execute in old folder ? Thanks for the riddle answers

    Read the article

  • I want to make an item on a Windows 7 Jump List run as administrator

    - by ProfKaos
    Only occasionally I have to open a Visual Studio project with a VS instance running under admin. This is a little inconvenient because I can't use the short-cut for that project in the VS Jump List. How can I modify the Jump List entry to force VS to open that project running as admin? Please note that I'm not trying to avoid providing admin auth to do this. I'm just trying to avoid having to run VS as admin, and then having to open the project from within VS once it opens.

    Read the article

  • ms access template where to find the vb code

    - by tintincute
    Hi I'm very new to this ms access 2007. I have a copy of a charitable contribution template charitablecontributions.accdb. I would like to know where I can find the code of it? I opened it by holding down the shift button and double click on it and it will open to a normal ms access where you can modify the table and so. But when I just click the file: charitablecontributions.accdb it will open to a formular view where the ribbon bars are gone. I wanted to know how, how is it possible to have this formular view? Because I have a Test.mdb from 2003 and I also would like it to be open like the formular view of charitablecontributions.accdb. I'll appreciate your help. Thanks

    Read the article

  • Nginx Ubuntu Postfix Config - Can't connect to incoming IMAP server 'server not responding' but can send mail via outgoing using same details?

    - by daveaspinall
    I'm pretty to new server admin and especially nginx but seem to be getting ok fine apart from accessing my mail via my iPhone? I've changed my domain to 'domain.com' The thing is I can send mail via my outgoing IMAP server but can't connect to the incoming one? I just get the message "the mail server at mail.domain.com is not responding" /etc/postfix/main.cf alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases append_dot_mydomain = no biff = no broken_sasl_auth_clients = yes config_directory = /etc/postfix home_mailbox = Maildir/ inet_interfaces = all inet_protocols = all mailbox_command = mailbox_size_limit = 0 mydestination = domain.com, mail.domain.com, localhost.com, , localhost, localhost.localdomain mydomain = domain.com myhostname = mail.domain.com mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 myorigin = /etc/mailname recipient_delimiter = + relayhost = smtp_tls_note_starttls_offer = yes smtp_tls_security_level = may smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) smtpd_recipient_restrictions = permit_sasl_authenticated,permit_mynetworks,reject_unauth_destination smtpd_sasl_auth_enable = yes smtpd_sasl_local_domain = smtpd_sasl_security_options = noanonymous smtpd_tls_CAfile = /etc/ssl/certs/cacert.pem smtpd_tls_auth_only = no smtpd_tls_cert_file = /etc/ssl/certs/smtpd.crt smtpd_tls_key_file = /etc/ssl/private/smtpd.key smtpd_tls_loglevel = 1 smtpd_tls_received_header = yes smtpd_tls_security_level = may smtpd_tls_session_cache_timeout = 3600s tls_random_source = dev:/dev/urandom telnet localhost 25 ehlo locahost 250-mail.domain.com 250-PIPELINING 250-SIZE 10240000 250-VRFY 250-ETRN 250-STARTTLS 250-AUTH LOGIN PLAIN 250-AUTH=LOGIN PLAIN 250-ENHANCEDSTATUSCODES 250-8BITMIME 250 DSN Using the following details to connect: username password hostname: mail.domain.com port: 25 iptables --list Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination I also sent mail to the server as a test and got this missage if it helps? Technical details of temporary failure: [mail.domain.com. (10): Connection refused] I also looked in /var/log/mail.log and it has multiple entries of: postfix/smtpd[12239]: connect from 5acefc9a.bb.sky.com[90.206.252.xxx] Mar 23 06:47:09 new-domain postfix/smtpd[12239]: lost connection after CONNECT from 5acefc9a.bb.sky.com[90.206.252.154] Notice new-domain which is incorrect but the server hostname and hostname in the configs are correct? I recently moves servers and the host has set the primary domain on the service as new-domain.com so this may be the issue? Like I said, it works to connect to outgoing server, but incoming gets the not responding error? Any idea would be much appreciated!

    Read the article

  • Mail merge, using my own fields: .xls, word 2003 xp pro

    - by Flotsam N. Jetsam
    Office Version:Office 2003Operating System:Windows XP 0 I have a Word doc that looks like this: <<PracticeName>> <<PracticeAddress>> <<PracticeCitystate>> <<PatientName>> <<PatientAddress>> And a .xls that looks like this: PracticeName PracticeAddress PracticeCitystate PatientName PatientAddress Acme Diagnostics 101 Apian Road Cleveland, OH 44115 George Bush 111 Broad Way I have Word 2003 and I: Open Word & blank doc ToolsLetters&MailingsMailMerge Letters is checkedNext Check "Start from existing," and select my aforementioned doc, openNext Check "Use an existing list," and open my aforementioned xls, open, use defaults Next Do nothing at "write your letter" Next OK, I'm at preview, yet my document still looks exactly as shown above. What am I doing wrong?

    Read the article

  • VGA Cable gave me an Electric Shock when connecting a Projector to a Laptop

    - by Felipe Luarte
    Yesterday I was trying to connect a Viewsonic Projector to my Samsung RC420 laptop... I followed this steps: I Plugged the Projector to a power source, in parallel I did the same thing with the laptop. Then I turned on the laptop, but not the Projector (this one turns a bright light when is connected to a power source). I put the VGA Cable to the Projector (this one being still turned down) and then when I was getting close to the VGA port of the Laptop... BAM! A big spark appear between the port and the cable! Immediately the whole electricity of my floor went off. A part of the port in my laptop kind of... melted down. It seems to be where the spark started. The same thing happened to the part of the cable involved. Now I'm using the laptop, and it seems that there is no problem in it, I haven't connect anything to the VGA port yet. And the projector is still working to, well... it turns on, and I haven't connect anything yet too. The projector was connected to the power source by a homemade electric extension.

    Read the article

  • How to stop Word 2011 opening hyperlinks on click?

    - by John Yeates
    In previous versions of MS Word, there was a preference for the action to be taken when the user clicked a hyperlink: open it, or edit it. Word 2011 appears to have defaulted to opening the hyperlink, and I can't find the preference to change this behaviour. How can I change Word's default behaviour when a hyperlink is clicked to be editing the text of the hyperlink? Holding down a modifier key when clicking is not an acceptable solution, as the aim here is to prevent misclicks from causing web pages to open. Edit: the links need to stay as links in the saved document. But when clicked on my machine, they should not open; Word needs to default to just editing the link, so an inaccurate click does not take me out of the document into Safari. Older versions of Word had a preference controlling this, and Microsoft seem to have removed it and fixed the behaviour at the unsafe option in order to satisfy the point-and-drool crowd.

    Read the article

  • MS Excel Vba/Macro equivalent in LibreCalc or OpenOfficeCalc

    - by ReggieCL
    is there an equivalent macro/vba in libre calc that does this routine; - Read/open xls files in a path and do a batch import/copy of read sheets and merge it with the current open workbook. Here's the vba I used in MS Excel. Thanks in advance Sub Consolidate_Sheets() 'Folder Path to read the xlsx files from Path = "F:\WIP2\Below 25\" filename = Dir(Path & "*.xlsx") Do While filename <> "" Workbooks.Open filename:=Path & filename, ReadOnly:=True For Each sheet In ActiveWorkbook.Sheets 'import/copy sheets from to read xlsx files sheet.Copy After:=ThisWorkbook.Sheets(1) Next sheet Workbooks(filename).Close filename = Dir() Loop End Sub

    Read the article

  • Computer doesn't boot, continuously restarts; possible disk error

    - by Olcay Ertas
    I have shut down my computer two hours ago. When I open my computer it started restarting itself after showing the POST screen. I can open my computer with a Ubuntu Live CD or Windows installation CD. I can also open and boot my computer with my second drive, so I think something is wrong with my primary hard drive. Do you have any idea what the problem might be and how can I fix it? I am using an HP DV9087EA laptop and my primary disk is a WD500GB. I have installed Ubuntu 10.10 and Windows 7 on my drive.

    Read the article

< Previous Page | 373 374 375 376 377 378 379 380 381 382 383 384  | Next Page >