Search Results

Search found 16218 results on 649 pages for 'compiler errors'.

Page 378/649 | < Previous Page | 374 375 376 377 378 379 380 381 382 383 384 385  | Next Page >

  • Password protect an alias virtual difrecory

    - by Jason
    I have a main domain being hosted through CPanel. I also have a sub-domain that I would like to appear as a path under the main domain instead of as a sub-domain. So I have: http://example.com/ pointing to the main hosted file. http://example.com/mydir pointing to the subdomain files. This is achieved by a httpd.conf include from the main domain section to set an alias: alias /mydir /path/to/subdomain/files/ Now, that works fine so far. The problem is that if a .htaccess file under /path/to/the/subdomain/files/ contains an error, the alias is completely skipped, and /mydir goes instead to the main host files. That is kind of surprising to me - I would expect an error to return an error instead. Now the killer: if I try to password protect /path/to/subdomain/files/, then trying to access http://example.com/mydir will again attempt to deliver from under the main hosted files and not from /path/to/subdomain/files/ I am not seeing any errors reported on the .htaccess file in the apache error log, so I am assuming the .htaccess is valid: AuthUserFile /path/to/valid/readable/.htpasswd AuthName "Secure Access" AuthType Basic Require valid-user This kind of behaviour does not seem right to me. Is there something obvious that could be causing it? Or is this just the way it works? Perhaps using an alias is the wrong way to go?

    Read the article

  • how to install Ubuntu on a fresh hard drive

    - by Herman Wiegman
    I attempted to install Ubuntu from a USB stick to my Intel 4 3GHz computer with 80GB HDD. The installer was doing well, then it said something to the effect of "errors on the source USB, or the target HDD" The recommendation was to download the installer again. I suspected my HDD was going bad so I figured I would investigate. What I found was a partially formatted 80GB HDD. I repartitioned it via a different computer. Now a fresh copy of the Ubuntu USB installer is not able to move past the start-up screen (it freezes). I was able to purchase a new / clean HDD, but still the fresh copy of the installer still locks up after the initial opening screen (locks up after about 2 screens worth of installations steps). Does this sounds like a HDD NTHS issue or a CPU/hardware/memory issue? or should I move to a CD image file rather than my USB stick? Now my computer is stuck... no OS.. no way to go back to Windows (upgrade OS CD only). Any insight would be greatly appreciated. Stuck in Schenectady Herman Wiegman

    Read the article

  • Calculating distance from viewer to object in a shader

    - by Jay
    Good morning, I'm working through creating the spherical billboards technique outlined in this paper. I'm trying to create a shader that calculates the distance from the camera to all objects in the scene and stores the results in a texture. I keep getting either a completely black or white texture. Here are my questions: I assume the position that's automatically sent to the vertex shader from ogre is in object space? The gpu interpolates the output position from the vertex shader when it sends it to the fragment shader. Does it do the same for my depth calculation or do I need to move that calculation to the fragment shader? Is there a way to debug shaders? I have no errors but I'm not sure I'm getting my parameters passed into the shaders correctly. Here's my shader code: void DepthVertexShader( float4 position : POSITION, uniform float4x4 worldViewProjMatrix, uniform float3 eyePosition, out float4 outPosition : POSITION, out float Depth ) { // position is in object space // outPosition is in camera space outPosition = mul( worldViewProjMatrix, position ); // calculate distance from camera to vertex Depth = length( eyePosition - position ); } void DepthFragmentShader( float Depth : TEXCOORD0, uniform float fNear, uniform float fFar, out float4 outColor : COLOR ) { // clamp output using clip planes float fColor = 1.0 - smoothstep( fNear, fFar, Depth ); outColor = float4( fColor, fColor, fColor, 1.0 ); } fNear is the near clip plane for the scene fFar is the far clip plane for the scene

    Read the article

  • Computer becomes unreachable on lan after some time

    - by Ashfame
    I work on my laptop and ssh into my desktop. I use a lot of key based authentication for many servers for work but recently I couldn't login because ssh would pick up and try all the keys and it stops trying before ultimately falling back to password based login. So right now I am using this command: ssh -X -o PubkeyAuthentication=no [email protected] #deskto The issue is after sometime the desktop would just become unreachable from laptop. I won't be able to open its localhost through IP and today I tried ping'in it and found a weird thing. Instead of 192.168.1.4, it tries to ping 192.168.1.3 which I am sure is the root cause as it just can't reach 192.168.1.4 when its actually trying for 192.168.1.3 Ping command output: ashfame@ashfame-xps:~$ ping 192.168.1.4 PING 192.168.1.4 (192.168.1.4) 56(84) bytes of data. From 192.168.1.3 icmp_seq=1 Destination Host Unreachable From 192.168.1.3 icmp_seq=2 Destination Host Unreachable From 192.168.1.3 icmp_seq=3 Destination Host Unreachable From 192.168.1.3 icmp_seq=4 Destination Host Unreachable From 192.168.1.3 icmp_seq=5 Destination Host Unreachable From 192.168.1.3 icmp_seq=6 Destination Host Unreachable From 192.168.1.3 icmp_seq=7 Destination Host Unreachable From 192.168.1.3 icmp_seq=8 Destination Host Unreachable From 192.168.1.3 icmp_seq=9 Destination Host Unreachable ^C --- 192.168.1.4 ping statistics --- 10 packets transmitted, 0 received, +9 errors, 100% packet loss, time 9047ms pipe 3 Also the ping command message comes in multiple and not one by one. (izx answer's the weirdness I thought there was in ping command.) I did check for desktop, its local IP is still the same, so something is going on in my laptop. Any ideas? P.S. - Laptop runs Ubuntu 12.04 & Desktop runs Ubuntu 11.10 Laptop is connected through wifi to router and Desktop is connected through LAN to router. Update: Even after setting up static IP leases in router settings, I again ran into this issue.

    Read the article

  • Can't mount USB devices, shut down etc. as a user

    - by Alok
    I tried gnome3 and gnome3-staging ppas to test running Gnome 3.8. After a while I decided that Gnome 3.8 wasn't for me, so I did a ppa-purge of both the ppas. As described in gnome3-staging ppa page, I also did: $ sudo apt-get purge libpam-systemd $ sudo apt-get install libpam-xdg-support The trouble is, I can't mount my external USB device anymore. When I try to mount it as a user, it fails: $ udisks --mount /dev/sdc1 Mount failed: Not Authorized I am logged in an XFCE session, but the same thing happens in a fallback Gnome session, or from a Unity session. Also, in XFCE, "suspend" and "shut down" menus are grayed out. I can't also open synaptic package manager from XFCE menus (sudo synaptic works). After a lot of searching, it seems like it is a policykit issue. I see the following in my ~/.xsession-errors: (polkit-gnome-authentication-agent-1:5805): polkit-gnome-1-WARNING **: Unable to determine the session we are in: No session for pid 5805 PID 5805 doesn't exist. If I try to start polkit-dnome-authentication-agent-1 from an xterm, I get the same error (different PID): $ /usr/lib/policykit-1-gnome/polkit-gnome-authentication-agent-1 ... (polkit-gnome-authentication-agent-1:15971): polkit-gnome-1-WARNING **: Unable to determine the session we are in: No session for pid 15971 (the ... lines are warnings from GTK about missing css files etc.). polkitd is running: $ pidof polkitd 1495 Is there something I am missing?

    Read the article

  • Ubuntu update deleted entries from grub

    - by Kevin
    My computer currently has Fedora, Ubuntu, and Windows installed. I just updated Ubuntu 12.04, and on restarting, the Fedora entry was gone from GRUB. Ubuntu and Windows remained, though. I have looked at these threads: Fedora login gone after Ubuntu updates on a dual boot http://forums.fedoraforum.org/showthread.php?t=279221 GRUB's menu.lst deleted after a kernel update However, I cannot figure out how to mount the drive as suggested. It does not appear in the list on the left side of nautilus as shown in the links above. I also tried running the following as suggested above: sudo grub-install /dev/sdX sudo update-grub But this gave scary errors: /usr/sbin/grub-setup: warn: Attempting to install GRUB to a partitionless disk or to a partition. This is a BAD idea.. /usr/sbin/grub-setup: warn: Embedding is not possible. GRUB can only be installed in this setup by using blocklists. However, blocklists are UNRELIABLE and their use is discouraged.. /usr/sbin/grub-setup: error: will not proceed with blocklists. The highlighted drive below is where Fedora lives. Thanks for any help reversing Ubuntu's decision to delete this from GRUB.

    Read the article

  • Why can't tuxboot and ubuntu play well together?

    - by mmr
    I'm trying to get clonezilla to run off of a usb stick, and it seems that the right way to do that is via tuxboot. Tuxboot is not compilable on ubuntu. I used git to get it from the repository, and then when I run the 'install' script (because building it is apparently not allowed, since the build script just tries to install windows things). Qmake-linux wants my qmake executable to be in the same directory as the stuff I pulled down, and let's just say that if there's a way to do this easily, I ain't seein' it. So then I download the linux file, the most recent of which is tuxboot-linux-25. Try to run it, get a failure that libpng12.so.0 isn't found. OK, then I go to install that via the instructions I found on the web but firefox seems to have already deleted from my history (yay!) Then I add the /usr/local/lib directory to ldconfig via emacs (had to install that too, of course): http://ubuntuforums.org/showthread.php?t=369848 I still get the errors that libpng12.so.0 cannot be opened because 'No such file or directory'. ldconfig -p | grep libpng shows that the library is there, but it still doesn't seem to be findable. What to do next? (for the record, doing this in windows is painless-- download, click, and it's done. But I'm trying to be all linuxy and get away from Windows for this...)

    Read the article

  • Installing ubuntu 12.04 on macbook pro9,2

    - by stariz77
    I seem to have tried all the various suggested methods for installing ubuntu on a mbp, but can't seem to get anything that works and was wondering if anyone has run into any new problems with the latest non-retina models? I have a core i7 in my macbook, and model identifier is MacBookPro9,2. I have partitioned my HD using disk utility and have 700gig free space ready for the install (I haven't removed OSX Lion, it is still there in a 50gig partition). Problem: I am just getting a blank screen with a blinking cursor (unresponsive) in the top left whenever I boot from the disk. I left it for 20 minutes and nothing ever happened. This was without any boot manager, just holding "c" on startup. Attempted remedies: I have downloaded the 64 ubuntu iso from their site 3 times now and burned 4 separate discs to rule out some kind of corruption or burn error. I burned one in OSX Lion 10.7.4 and 3 on my windows 7 pc. I tried holding "alt" instead and then navigating to the windows disc to boot. Same thing happens, blank blinking unresponsive cursor. I also tried going to the EFI disc which actually brings up a menu (after saying "error prefix is not set") asking if I want to install ubuntu, test for errors or partition. All three options lead me to an unresponsive blank screen (some without cursors). I downloaded and installed rEFIt and if I hold "alt" on startup a linux penguin (Boot Linux from CD) appears in my boot options, along with the apple boot, and two others that I'm not sure of: "Boot EFI\boto\bootx64.efi from" and "Boot Legacy OS from". The "Boot Linux from CD" just takes me to the blank blinking cursor screen; again, I left if for 10+ minutes and nothing. I heard that the detection of the graphics card might be a problem and that I need change to nomodeset, but I have tried pressing F6 in all of the boot menus listed above and no options appear. Does anyone have any other suggested routes or can you see what I might have done wrong?

    Read the article

  • CoffeeScript - inability to support progressive adoption

    - by Renso
    First if, what is CoffeeScript?Web definitionsCoffeeScript is a programming language that compiles statement-by-statement to JavaScript. The language adds syntactic sugar inspired by Ruby and Python to enhance JavaScript's brevity and readability, as well as adding more sophisticated features like array comprehension and pattern matching.The issue with CoffeeScript is that it eliminates any progressive adoption. It is a purist approach, kind of like the Amish, if you're not borne Amish, tough luck. So for folks with thousands of lines of JavaScript code will have a tough time to convert it to CoffeeScript. You can use the js2coffee API to convert the JavaScript file to CoffeeScript but in my experience that had trouble converting the files. It would convert the file to CoffeeScript without any complaints, but then when trying to generate the CoffeeScript file got errors with guess what: INDENTATION!Tried to convince the CoffeeScript community on github but got lots of push-back to progressive adoption with comments like "stupid", "crap", "child's comportment", "it's like Ruby, Python", "legacy code" etc. As a matter of interest one of the first comments were that the code needs to be re-designed before converted to CoffeeScript. Well I rest my case then :-)So far the community on github has been very reluctant to even consider introducing some way to define code-blocks, obviously curly braces is not an option as they use it for json object definitions. They also have no consideration for a progressive adoption where some, if not all, JavaScript syntax will be allowed which means all of us in the real world that have thousands of lines of JavaScript will have a real issue converting it over. Worst, I for one lack the confidence that tools like js2coffee will provide the correct indentation that will determine the flow of control in your code!!! Actually it is hard for me to find enough justification for using spaces or tabs to control the flow of code. It is no wonder that C#, C, C++, Java, all enterprise-scale frameworks still use curly braces. Have never seen an enterprise app built with Ruby or PhP.Let me know what your concerns are with CoffeeScript and how you dealt with large scale JavaScript conversions to CoffeeScript.

    Read the article

  • Ubuntu 13.10 Unity doesn't load after upgrade

    - by William
    Just upgraded to Ubuntu 13.10 only to find that Unity won't load (login freezes, after doing ctrl+alt+F1, logging in and then doing startx, I get a blank desktop and the mouse pointer, and nothing else). I can right click, but the only operations that work are "create new file" and "create new folder". For example, "change desktop background" doesn't work. Also, after doing a few right clicks and choosing "change desktop background", I get a warning message box: "compiz closed unexpectedly." Guest login works fine. Tried creating a new user, but I experience the same thing with the new user. Tried removing all configuration files from my home directory... same thing. Doing dconf reset -f /org/compiz/ gives an error "error spawning command line..." Doing unity --reset also gives errors. Tried uninstalling unity (and compiz) and reinstalling, but that doesn't help. Tried reconfiguring lightdm, didn't help. I don't have any proprietary drivers installed. Once again, the funny thing is that the guest session works fine.

    Read the article

  • PDFtk Password Protection Help

    - by Dave W.
    I am using Ubuntu 11.10 and am looking for a solution to password protect a bunch of pdf files in a directory in batch. I came across PDFtk and it looks like it might do what I need, but I've reviewed the command line PDFtk examples and can't figure out if there is a way to do it in batch without having to individually specify the output file name for every file. I'm hoping a command-line guru can take a look at the PDFtk syntax and tell me if there is some trick / command that will allow me to password protect a directory of pdf files (e.g., *.pdf) and overwrite the existing files using the same name, or consistently rename the individual output files without having to specify each output name individually. Here's a link to the PDFtk command line examples page: http://www.pdflabs.com/tools/pdftk-the-pdf-toolkit/ Thanks for your help. I think I've answered my own question. Here's a bash script that appears to do the trick. I'd welcome help evaluating why the code I've commented out doesn't work... #!/bin/bash # Created by Dave, 2012-02-23 # This script uses PDFtk to password protect every PDF file # in the directory specified. The script creates a directory named "protected_[DATE]" # to hold the password protected version of the files. # # I'm using the "user_pw" parameter, # which means no one will be able to open or view the file without # the password. # # PDFtk must be installed for this script to work. # # Usage: ./protect_with_pdftk.bsh [FILE(S)] # [FILE(S)] can use wildcard expansion (e.g., *.pdf) # This part isn't working.... ignore. The goal is to avoid errors if the # directory to be created already exists by only attempting to create # it if it doesn't exists # #TARGET_DIR="protected_$(date +%F)" #if [ -d "$TARGET_DIR" ] #then #echo # echo "$TARGET_DIR directory exists!" #else #echo # echo "$TARGET_DIR directory does not exist!" #fi # mkdir protected_$(date +%F) for i in *pdf ; do pdftk "$i" output "./protected_$(date +%F)/$i" user_pw [PASSWORD]; done echo "Complete. Output is in the directory: ./protected_$(date +%F)"

    Read the article

  • team viewer 8 beta wont run

    - by Conner Jones
    I installed team viewer 7 and then one of my friends using windows got version 8 so I installed the beta of version 8 for linux. When I try to run it for terminal I get these errors i atempted to do as the comment bellow said and when trying to run teamveiwer i stil got an error conner@DemonicGrace:~$ teamviewer Init... Checking setup... Launching TeamViewer... wine: cannot find L"C:\windows\system32\winemenubuilder.exe" err:wineboot:ProcessRunKeys Error running cmd L"C:\windows\system32\winemenubuilder.exe -a -r" (2) err:winedevice:ServiceMain driver L"MountMgr" failed to load err:secur32:SECUR32_initSchannelSP libgnutls not found, SSL connections will fail fixme:heap:HeapSetInformation (nil) 1 (nil) 0 fixme:ole:CoInitializeSecurity ((nil),-1,(nil),(nil),0,3,(nil),0,(nil)) - stub! fixme:heap:HeapSetInformation (nil) 1 (nil) 0 fixme:process:SetProcessShutdownParameters (00000100, 00000000): partial stub. fixme:resource:GetGuiResources (0xffffffff,0): stub fixme:win:EnumDisplayDevicesW ((null),0,0x32df64,0x00000000), stub! fixme:win:EnumDisplayDevicesW (L"\\.\DISPLAY1",0,0x32dc1c,0x00000000), stub! fixme:win:EnumDisplayDevicesW ((null),1,0x32df64,0x00000000), stub! please help me out if anyone has ideas im more than willing to listen

    Read the article

  • IRQ Conflicts Causing Video Card and Boot Problems?

    - by sanpatricio
    tl;dr - I have 4 devices sharing 1 IRQ. Is this bad and how do I tell the BIOS to stop it? Background: I have an old Dell GX280 dual Pentium 4 that I (semi) resurrected last weekend with an installation of Ubuntu 12.04. Everything was going fine the first several hours until a problem that plagued me when WinXP was on that machine happened -- it froze. Completely froze. None of the myriad of ways I have found here on askubuntu helped me to regain control except a long-press of the power button to shut it off. Clearly, this wasn't a software/WinXP issue. After much googling, I found that hardware conflicts can often cause this sort of total lock-up and with all the odd blocks of yellow and flecks of color showing on my screen (both WinXP and Ubuntu) I figured my old GeForce 7600 was failing and causing me these odd issues. (A good canned-air dusting of the entire interior fixed the color fleck problem) Again, through much googling and numerous answers found on askubuntu, I somehow stumbled my way onto the lshw command. After going through it, line by line, I found that I have four devices sharing IRQ 16: eth0, wlan0, ide0 (DVD-RW), and my video card. In hindsight, I can recall weird instances of my Ethernet connection to another computer not working when I thought it should. I never full troubleshot those issues so it could be a coincidence. The other thing that has been plaguing me since installing Ubuntu (wasn't there during WinXP) has been periodic moments of my monitor getting no signal from Ubuntu during boot. The first couple days, it would disappear after the Dell boot screen and reappear at Ubuntu login. Now, it disappears after the Dell boot screen and doesn't return at all -- I have to hit F12 where I can load a safe mode version of Ubuntu and get more details like dmesg and lsdev. I also ran memtest86 overnight and woke up to zero errors, so failing RAM is out. Where do I go from here?

    Read the article

  • Testing of visualization projects

    - by paxRoman
    We develop small to large visualization projects for different tasks and industries and sometimes while rewriting them a couple of times in the process we hit walls because we discover that we need to add a lot of code to support new requirements. Now we have established a design process that seems to work well (at least we reduced the development time for each new project quite a bit), but we're still left scratching our heads around this question: what exactly should we test when testing visualizations? If everything that we want to explore is on the screen (bounded visualizations)? If the data is ok - if data is valid (that's one of the nice things about visualizations you can spot errors in your datasets)? Usability? User interaction? Code quality? I can tell you for sure that a simple check of the code quality is certainly not enough! Is there a classic paper / book about how to test visualizations? Also do you happen to know about classic design patterns for visualizations (except the obvious ones like Pub-Sub)?

    Read the article

  • X Error of failed request: BadMatch [migrated]

    - by Andrew Grabko
    I'm trying to execute some "hello world" opengl code: #include <GL/freeglut.h> void displayCall() { glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); glEnable(GL_DEPTH_TEST); ... Some more code here glutSwapBuffers(); } int main(int argc, char *argv[]) { glutInit(&argc, argv); glutInitDisplayMode(GLUT_RGB | GLUT_DOUBLE | GLUT_DEPTH); glutInitWindowSize(500, 500); glutInitWindowPosition(300, 200); glutInitContextVersion(4, 2); glutInitContextFlags(GLUT_FORWARD_COMPATIBLE); glutCreateWindow("Hello World!"); glutDisplayFunc(displayCall); glutMainLoop(); return 0; } As a result I get: X Error of failed request: BadMatch (invalid parameter attributes) Major opcode of failed request: 128 (GLX) Minor opcode of failed request: 34 () Serial number of failed request: 39 Current serial number in output stream: 40 Here is the stack trace: fghCreateNewContext() at freeglut_window.c:737 0x7ffff7bbaa81 fgOpenWindow() at freeglut_window.c:878 0x7ffff7bbb2fb fgCreateWindow() at freeglut_structure.c:106 0x7ffff7bb9d86 glutCreateWindow() at freeglut_window.c:1,183 0x7ffff7bbb4f2 main() at AlphaTest.cpp:51 0x4007df Here is the last piece of code, after witch the program crashes: createContextAttribs = (CreateContextAttribsProc) fghGetProcAddress("glXCreateContextAttribsARB" ); if ( createContextAttribs == NULL ) { fgError( "glXCreateContextAttribsARB not found" ); } context = createContextAttribs( dpy, config, share_list, direct, attributes ); "glXCreateContextAttribsARB" address is obtained successfully, but the program crashes on its invocation. If I specify OpenGL version less than 4.2 in "glutInitContextVersion()" program runs without errors. Here is my glxinfo's OpelGL version: OpenGL version string: 4.2.0 NVIDIA 285.05.09 I would be very appreciate any further ideas.

    Read the article

  • Dealing with inflexible programmers.

    - by Singleton
    Sometimes programmers who work on a project for long time get inflexible, and it becomes difficult to reason with them. Even if we do manage to convince them, they can be unlikely to implement our suggestions. For instance, I recently joined a project where the build & release process is too complicated and has unnecessary roadblocks. I suggested that we get rid of some of the development overhead (like filling a few spreadsheets) just by integrating defect management and version control tools (both are IBM-Rational tools so integration can be a very easy one-off effort). Also, if we use tools like Maven & Ant (the project involves Java and some COTS products) build & release can be simplified which should reduce manual errors & intervention. I managed to convince others and I'm ready to put in the effort to develop a proof of concept. But the ‘Senior’ developer is not willing, possibly because the current process makes him more valuable. How do we handle this situation without developing friction in the team?

    Read the article

  • Stylecop 4.7.37.0 has been released

    - by TATWORTH
    Stylecop  4.7.37.0 has been released at http://stylecop.codeplex.com/releases/view/79972The release notes follow:Add docs for new SA1650 spelling rule.Fix for 7395. Dont remove parenthesis around await expressions.Insert a returns element into docs within a see element.Update our tools folder StyleCop dll'sfix for 7392. Insert generic type docs for return types correctly.Fix for 7393. Allow documentation elements with attributes to end the string and still be valid.Make sure the MSBuild Task logs the warning id and type of exception. Unless the description field holds all this info VS cannot show the text in the Error List.Load custom dictionaries for multiple cultures. For a culture like en-GB; we load CustomDictionary.xml, then look for CustomDictionary.en-GB.xml and then CustomDictionary.en.xmlUpdate standard shipping dictionaries.Element documentation spelling fixes.Reduce the standard dictionaryUpdate our own devbuild StyleCop checks.Don't check spelling of xml documentation attributes are anything inside  <c> or <code> elements.Update StylingStyling update.Add timestamps for all the dependant files into the StyleCopResults.cache. Add a FileSystemWatcher to all custom dictionary files.Write out the full violation into the StyleCopResults.cache.Change a rules description text.Styling fixes.Styling fixes.NEW RULE: Check Spelling Of Element Documetation. Fix over 2000 spelling errors in our source code. Update the VS addin to show the rule violation in more detail. Add spelling checker to the deployment.Set our own Culture to en-USDocumentation spelling fixes.First draft of the documentation spelling checker.Fix for 7325. Don't throw 1126 in goto statements.Fix for 7090. Add TargetsDir to registry during install.Fix for 7060. Sort usings after moving them inside namespace.Fix FxCop issues.Fix for 7389. Detect CpuCount on Unix/MACFix for 6788. Allow opening curly brackets for scope. Added new tests.Updating constants.Fix for 7167. Show version number of StyleCop in VS Help window.Only output StyleCop excluded files if there are any.

    Read the article

  • polipo E: Sub-process /usr/bin/dpkg returned an error code (1)

    - by ICXC
    @me:/home$ sudo apt-get install polipo Reading package lists... Done Building dependency tree Reading state information... Done The following NEW packages will be installed: polipo 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 198 kB of archives. After this operation, 799 kB of additional disk space will be used. Get:1 http://sy.archive.ubuntu.com/ubuntu/ precise/universe polipo amd64 1.0.4.1-1.1 [198 kB] Fetched 198 kB in 2s (97.5 kB/s) Selecting previously unselected package polipo. (Reading database ... 169595 files and directories currently installed.) Unpacking polipo (from .../polipo_1.0.4.1-1.1_amd64.deb) ... Processing triggers for doc-base ... Processing 1 added doc-base file... Processing triggers for man-db ... Processing triggers for install-info ... Processing triggers for ureadahead ... Setting up polipo (1.0.4.1-1.1) ... Starting polipo: Couldn't open config file /etc/polipo/config: 2. invoke-rc.d: initscript polipo, action "start" failed. ****dpkg: error processing polipo (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: polipo E: Sub-process /usr/bin/dpkg returned an error code (1)****

    Read the article

  • CodeStock 2012 Review: Eric Landes( @ericlandes ) - Automated Tests in to automated Builds! How to put the right type of automated tests in to the right automated builds.

    Automated Tests in to automated Builds! How to put the right type of automated tests in to the right automated builds.Speaker: Eric LandesTwitter: @ericlandesBlog: http://ericlandes.com/ This was one of the first sessions I attended during CodeStock 2012. Eric’s talk focused mostly on unit testing, and that the lack of proper unit testing can be compared to stealing from an employer. His point was that if you’re not doing proper unit testing then all of the time wasted on fixing issues that could have been detected with unit tests is like stealing money from employer. He makes the assumption that that time spent on fixing these issues could have been better spent developing new features that drive the business. To a point I can agree with Eric’s argument regarding unit testing and stealing from a company’s perspective. I can see how he relates resources being shifted from new development to bug fixes as stealing based on the fact that the resources used to fix bugs are directly taken from other projects. He also states that Boring/Redundant and Build/Test tasks should be automated because it reduces the changes of errors and frees up developer to do what they do best, DEVELOP! When he refers to testing, he breaks testing down in to four distinct types. Unit Test Acceptance Test (This also includes Integration Tests) Performance Test UI Test With this he also recommends that developers should not go buck wild striving for 100% code coverage because some test my not provide a great return on investment. In his experience he recommends that 70% test coverage was a very acceptable rate.

    Read the article

  • How to identify process that's sending error messages to terminal?

    - by kjo
    The following error message occasionally appears in my terminal: Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory ...which is pretty annoying. I have searched online for solutions to this error, without success. Is there any way to at least identify the process responsible for sending these error messages to my terminal? EDIT: Let me clarify that, as far as I can tell, these error messages appear "out of the blue". In fact, they appear asynchronously with respect to my interactions with the terminal (more often than not see them for the first time when I return to a terminal window that has been unattended for some time). I'm sure there's a definite, deterministic cause for these messages, but it is not one that I can readily identify. In short, I have not noticed any pattern or regularity to their occurrence. In particular, in my case their occurrence has nothing to do with running mplayer, or any other video playback program. (Please my earlier post about it here.) For one thing, the machine in question is a work machine, and I rarely watch any videos with it. In the very few instances in which I've watched a video on this machine I've used VLC, not mplayer, and these errors never appeared in these rare occasions that I used VLC.

    Read the article

  • Are there legitimate reasons for returning exception objects instead of throwing them?

    - by stakx
    This question is intended to apply to any OO programming language that supports exception handling; I am using C# for illustrative purposes only. Exceptions are usually intended to be raised when an problem arises that the code cannot immediately handle, and then to be caught in a catch clause in a different location (usually an outer stack frame). Q: Are there any legitimate situations where exceptions are not thrown and caught, but simply returned from a method and then passed around as error objects? This question came up for me because .NET 4's System.IObserver<T>.OnError method suggests just that: exceptions being passed around as error objects. Let's look at another scenario, validation. Let's say I am following conventional wisdom, and that I am therefore distinguishing between an error object type IValidationError and a separate exception type ValidationException that is used to report unexpected errors: partial interface IValidationError { } abstract partial class ValidationException : System.Exception { public abstract IValidationError[] ValidationErrors { get; } } (The System.Component.DataAnnotations namespace does something quite similar.) These types could be employed as follows: partial interface IFoo { } // an immutable type partial interface IFooBuilder // mutable counterpart to prepare instances of above type { bool IsValid(out IValidationError[] validationErrors); // true if no validation error occurs IFoo Build(); // throws ValidationException if !IsValid(…) } Now I am wondering, could I not simplify the above to this: partial class ValidationError : System.Exception { } // = IValidationError + ValidationException partial interface IFoo { } // (unchanged) partial interface IFooBuilder { bool IsValid(out ValidationError[] validationErrors); IFoo Build(); // may throw ValidationError or sth. like AggregateException<ValidationError> } Q: What are the advantages and disadvantages of these two differing approaches?

    Read the article

  • Cryptswap boot error - can't mount?

    - by woody
    I believe i have my swap set up but am not sure because on start up it says that it is something along the lines of "could not mount /dev/mapper/cryptswap1 M for manual S for skip". But it appears to be mounted? I have already tried this solution with no success. When i run free -m the output is: total used free shared buffers cached Mem: 3887 769 3117 0 54 348 -/+ buffers/cache: 366 3520 Swap: 4026 0 4026 and sudo bklid is: /dev/sda1: UUID="9fb3ccd6-3732-4989-bfa4-e943a09f1153" TYPE="ext4" /dev/mapper/cryptswap1: UUID="bd9fe154-8621-48b3-95d2-ae5c91f373fd" TYPE="swap" and cat /etc/crypttab is: cryptswap1 /dev/sda5 /dev/urandom swap,cipher=aes-cbc-essiv:sha256 my /etc/fstab is: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda1 during installation UUID=9fb3ccd6-3732-4989-bfa4-e943a09f1153 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation #UUID=bb0e378e-8742-435a-beda-ae7788a7c1b0 none swap sw 0 0 /dev/mapper/cryptswap1 none swap sw 0 0 cat /proc/swaps output is: Filename Type Size Used Priority /dev/dm-0 partition 4123644 0 -1 Is my swap not setup correctly or how can i fix my boot message?

    Read the article

  • Trying to build/install patched gtk3-engines-oxygen to test bugfix, get shared changelog.Debian.gz is different from other instances of package

    - by andlabs
    I want to just quickly test the patch in this bug report to gtk3-engines-oxygen so it can go upstream. I could test it either temporarily or permanently; I would just like to do it. I currently have the package installed. So far, I've tried: $ mkdir /tmp/o # keep everything self-contained $ cd /tmp/o $ apt-get source gtk3-engines-oxygen $ cd oxygen-gtk3-1.3.5/ $ patch -p1 < /path/to/patchfile $ dpkg-source --commit # to make debuild happy (name 'layout'; just save the default; this is a test) $ debuild -us -uc # bypass signature checks $ sudo debi ../oxygen-gtk3_1.3.5-0ubuntu1_amd64.changes According to some people on #ubuntu-packaging, this is what I have to do. It's this last step that's the problem; I'm getting (Reading database ... 503333 files and directories currently installed.) Preparing to unpack gtk3-engines-oxygen_1.3.5-0ubuntu1_amd64.deb ... Unpacking gtk3-engines-oxygen:amd64 (1.3.5-0ubuntu1) over (1.3.5-0ubuntu1) ... dpkg: error processing archive gtk3-engines-oxygen_1.3.5-0ubuntu1_amd64.deb (--install): trying to overwrite shared '/usr/share/doc/gtk3-engines-oxygen/changelog.Debian.gz', which is different from other instances of package gtk3-engines-oxygen:amd64 Errors were encountered while processing: gtk3-engines-oxygen_1.3.5-0ubuntu1_amd64.deb debi: debpkg -i failed What's going on? How do I fix it? Or am I doing this completely wrong (and ergo so are they)? I'm using Kubuntu 14.04 amd64. Thanks.

    Read the article

  • Completely unable to install python2.7-dev

    - by gath
    Am totally stuck! Am unable completely to install python2.7-dev on my Ubuntu13.04. I have tried all the tricks mentioned on this site (askubuntu.com) and many other sites on the web but still nothing! Am running Ubuntu 13.04 64bit on a virtualbox, but every time I run sudo apt-get install python2.7-dev, I get the following error; python2.7-dev : Depends: python2.7 (= 2.7.3-0ubuntu3.5) but 2.7.4-2ubuntu3 is to be installed Depends: libpython2.7 (= 2.7.3-0ubuntu3.5) but 2.7.4-2ubuntu3 is to be installed Depends: libexpat1-dev but it is not going to be installed Depends: libssl-dev but it is not going to be installed E: Unable to correct problems, you have held broken packages. I've tried to do apt-get update, but still nothing! I've even tried installing Python2.7 from sources, but still nothing doing! Is there a single package with all the dependencies I can download, that can just install everything (Python2.7-dev) or is there another trick I can use to get the Python-dev headers installed on my machine. Hint: I've noticed when I run sudo apt-get update , somewhere along the updates I've seen some errors; ... Get:1 http://us.archive.ubuntu.com precise-updates Release.gpg [198 B] Ign http://us.archive.ubuntu.com raring Release Ign http://us.archive.ubuntu.com raring-updates Release Ign http://us.archive.ubuntu.com raring-backports Release Ign http://us.archive.ubuntu.com raring-security Release Get:2 http://us.archive.ubuntu.com precise-updates Release [98.7 kB] Err http://extras.ubuntu.com raring/main Sources 404 Not Found Err http://extras.ubuntu.com raring/main amd64 Packages 404 Not Found Err http://extras.ubuntu.com raring/main i386 Packages 404 Not Found Ign http://extras.ubuntu.com raring/main Translation-en_US Ign http://extras.ubuntu.com raring/main Translation-en ... On my precise-updates.list file is a single entry; deb http://us.archive.ubuntu.com/ubuntu/ precise-updates main restricted I don't know if that might help Help! Paul

    Read the article

  • Only one user can connect to Ubuntu samba server

    - by StaticMethod
    I setup a samba server on 12.04 LTS, and it works great for one user but not the others. I am trying to map a network drive from a windows 7 laptop. I can successfully authenticate with one user, but the other two both get "Access is denied" errors. Here is my smb.conf file. [global] server string = %h server (Samba, Ubuntu) map to guest = Bad User obey pam restrictions = Yes pam password change = Yes passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . unix password sync = Yes syslog = 0 log file = /var/log/samba/log.%m max log size = 1000 dns proxy = No usershare allow guests = Yes panic action = /usr/share/samba/panic-action %d idmap config * : backend = tdb [printers] comment = All Printers path = /var/spool/samba create mask = 0700 printable = Yes print ok = Yes browseable = No [print$] comment = Printer Drivers path = /var/lib/samba/printers [share] comment = Ubuntu File Server Share path = /srv/share read only = No create mask = 0755 I know that the service is successfully reading from the /etc/passwd file because if I change the Linux password for the user that works, I have to use the new password when I connect. I changed all the users so they are all members of the same groups (all three users are admins anyway). I only ever have one user connected at a time. Here are the permissions on the shared folder /srv$ ls -l drwxrwxrwx 1 nobody nogroup 16 Feb 22 17:05 share Any ideas?

    Read the article

< Previous Page | 374 375 376 377 378 379 380 381 382 383 384 385  | Next Page >