Search Results

Search found 10536 results on 422 pages for 'cpu usage'.

Page 378/422 | < Previous Page | 374 375 376 377 378 379 380 381 382 383 384 385  | Next Page >

  • Some apps very slow to load on Windows 7, copy & paste very slow.

    - by Mike
    Hello, I searched here and couldn't find a similar issue to mine but apologies if I missed it. I've searched the web and no one else seems to be having the same issue either. I'm running Windows 7 Ultimate 64bit on a pretty high spec. machine (well, apart from the graphics): Asus M4A79T Deluxe AMD Phenom II 965 black edition (quad core, 3.4GHz) 8GB Crucial Ballistix DDR 1333MHz RAM 80GB Intex X25 SSD for OS 500GB mechanical drive for data. ATi Radeon HD 4600 series PCI-e Be Quiet! 850W PSU I think those are all the relevant stats, if you need anything else let me know. I've updated chipset, graphics and various other drivers all to no avail, the problem remains. I have also unplugged and replugged every connection internally and cleaned the RAM edge connectors. The problems: Video LAN (VLC) and CDBurnerXP both take ages to load, I'm talking 30 seconds and 1 minute respectively which is really not right. Copy and paste from Open Office spread sheet into Fire Fox, for example, is really, really slow, I'll have pressed control V 5 or 6 times before it actually happens, if I copy and then wait 5 to 10 seconds or so it'll paste first time so it's definitely some sort of time lag. Command and Conquer - Generals: Zero Hour. When playing it'll run perfectly for about 10 or 20 seconds then it'll just pause for 3 or 4 then run for another 10 or 20 seconds and pause again and so on. I had the Task Manager open on my 2nd monitor whilst playing once and I noticed it was using about 25% of the CPU, pretty stable but when the pause came another task didn't shoot up to 100% like others on the web have been reporting (similar but not the same as my issue, often svchost.exe for them) but dropped to 2 or 3% usage then back up to 25% when it started playing properly again. Very odd! But it gets even odder... I had a BSOD and reboot last week, when it rebooted the problem had completely gone, I could play C&C to my heart's content and both the other apps loaded instantly, copy and paste worked instantly too. I did an AVG update earlier this week which required a reboot, rebooted and the problem's back. I don't think it's AVG related though, I think it was just coincidence that's the app that required a reboot. I think any reboot would have brought the issue back. A number of reboots later and it hasn't gone away again. If any one could make any suggestions as to the likely cause and solution to these issues I'd be most grateful, it's driving me nuts! Thanks, Mike....

    Read the article

  • Flickering issue in external monitor when used with Acer Aspire One D260 netbook (Intel GMA 3150)

    - by seyenne
    I recently purchased a Acer netbook, Aspire One D260. It runs flawlessly. Yesterday I bought a Samsung 23" TFT with a native resolution of 1920x1080. According to the information found in the internet and my local computer dealer, the Intel chipset can handle the native resolution of the monitor. However, this is only partly the case. I use the VGA cable to connect, the monitor instantly switches to the native resolution and now the problem: Occasionally, especially the first 2 hours after booting up, I have a flickering all over the screen, sometimes the entire screen is shaking and spinning around like crazy. I figured out that lowering the resolution avoids the flicker but this helps only for some time. I can rule out that it's the monitor's problem since I found no issues with another notebook. Right now, I have no problems with the netbook, for about 30 minutes I didn't experience any issues... But I don't know for how long, it occurs without warning :-) I'm worried that if I would bring the netbook back to the dealer and explain my problem, after testing it on an external screen in the local shop, everything works just fine... And I won't get helped with the problem because I can't prove it. (I'm currently in Thailand and over here, customer service is nothing like back home in Germany) What can I do? Is this a driver related issue? (I installed the latest GPU driver) Is it because of the VGA cable? (But why does it work sometimes without any problems and with no issues on the other notebook) I monitored the GPU/CPU temperature, nothing changes really over time.. Can it simply be a faulty GPU and is a replacement justifiable? I'm really stressed now because for the time I'm writing, the flickering didn't occur... but for sure, soon or later it will happen again.. I forgot to mention, the problem also happens if the netbook runs on battery, unplugged. So the only hardware that is plugged is the TFT screen. ...........and here it comes again, flickering has just begun. NEED HELP! Thank you all for reading through this and giving any suggestions if possible. Cheers

    Read the article

  • GeForce 8800GT not even giving basic output

    - by Sam
    My Dad bought a GeForce 8800GT graphics card quite a long time ago now. It has never worked in his PC. Print out from a dxdiag: System Information Time of this report: 4/13/2010, 19:52:40 Machine name: USER-PC Operating System: Windows Vista™ Home Premium (6.0, Build 6001) Service Pack 1 (6001.vistasp1_gdr.091208-0542) Language: English (Regional Setting: English) System Manufacturer: To Be Filled By O.E.M. System Model: To Be Filled By O.E.M. BIOS: Default System BIOS Processor: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (4 CPUs), ~2.3GHz Memory: 2046MB RAM Page File: 1045MB used, 3296MB available Windows Dir: C:\Windows DirectX Version: DirectX 10 DX Setup Parameters: Not found DxDiag Version: 6.00.6001.18000 32bit Unicode DxDiag Notes Display Tab 1: No problems found. Sound Tab 1: No problems found. Sound Tab 2: No problems found. Sound Tab 3: No problems found. Input Tab: No problems found. DirectX Debug Levels Direct3D: 0/4 (retail) DirectDraw: 0/4 (retail) DirectInput: 0/5 (retail) DirectMusic: 0/5 (retail) DirectPlay: 0/9 (retail) DirectSound: 0/5 (retail) DirectShow: 0/6 (retail) Display Devices Card name: ATI Radeon HD 2400 PRO Manufacturer: ATI Technologies Inc. Chip type: ATI Radeon Graphics Processor (0x94C3) DAC type: Internal DAC(400MHz) Device Key: Enum\PCI\VEN_1002&DEV_94C3&SUBSYS_00000000&REV_00 Display Memory: 1012 MB Dedicated Memory: 245 MB Shared Memory: 767 MB Current Mode: 1280 x 960 (32 bit) (75Hz) Monitor: Generic PnP Monitor Driver Name: atiumdag.dll,atiumdva.dat,atitmmxx.dll Driver Version: 7.14.0010.0523 (English) DDI Version: 10 Driver Attributes: Final Retail Driver Date/Size: 8/22/2007 02:43:14, 3021312 bytes That info is from the current card that is installed in it and has been installed since its purchase roughly 3-4 years ago. When I physically install the card I put it into a purple slot on the motherboard that the old card was in (if I go into the device manager and select properties on the current card it confirms that the slot is a "PCI Slot 16 (PCI bus 2, device 0, function 0)") and boot up the computer but get absolutely no output. The screen that we have registers that it is connected to something (by not displaying the screen it does when the cable is unplugged) but just remains blank, no output at all. I recently took the card to my University and one of my friends who is better with hardware issues than I am tried it in his system and it worked perfectly. No issues whatsoever. I do not have a spec list for his system but I could get one if you need it. If you need any more information on this issue I will be happy to supply you with it as I am starting to get very annoyed with this problem ^_^

    Read the article

  • TeamSpeak 3 Disconnects

    - by ArchUser
    I've recently had a few random TS3 mass disconnects and I'm am curious to know where I may find any applications that can help me determine the cause of any types of TS3 server disconnections as we plan on having many more users in the future. I run an almost empty VPS (OpenVZ) server with an ArchLinux template on it. I have 1.5/2GB of RAM, 2GHz of CPU and plenty of hard drive space, to run for the most part, just my TS3 and a low traffic apache web server. This is what I am investigating. 2011-02-04 06:07:05.130343|INFO |VirtualServer | 1| client disconnected 'Valamoor'(id:224) reason 'reasonmsg=connection lost' 2011-02-04 06:07:05.131338|INFO |VirtualServer | 1| client disconnected 'Kevrow'(id:19? reason 'reasonmsg=connection lost' 2011-02-04 06:07:05.191849|INFO |VirtualServer | 1| client disconnected 'scuba'(id:200) reason 'reasonmsg=connection lost' 2011-02-04 06:07:05.192633|INFO |VirtualServer | 1| client disconnected '[Ash] Setna'(id:75) reason 'reasonmsg=connection lost' 2011-02-04 06:07:05.193350|INFO |VirtualServer | 1| client disconnected 'Akiris'(id:254) reason 'reasonmsg=connection lost' 2011-02-04 06:07:05.194047|INFO |VirtualServer | 1| client disconnected 'Marcus'(id:25? reason 'reasonmsg=connection lost' 2011-02-04 06:07:05.194726|INFO |VirtualServer | 1| client disconnected 'Guthry'(id:275) reason 'reasonmsg=connection lost' 2011-02-04 07:18:50.327071|INFO |VirtualServer | 1| client disconnected 'Valamoor'(id:224) reason 'reasonmsg=connection lost' 2011-02-04 07:18:51.339018|INFO |VirtualServer | 1| client disconnected 'Marcus'(id:25? reason 'reasonmsg=connection lost' 2011-02-04 07:18:51.339870|INFO |VirtualServer | 1| client disconnected '[Ash] Setna'(id:75) reason 'reasonmsg=connection lost' 2011-02-04 07:18:51.340515|INFO |VirtualServer | 1| client disconnected 'Guthry'(id:275) reason 'reasonmsg=connection lost' 2011-02-05 04:55:20.797353|INFO |VirtualServer | 1| client disconnected 'JohnyRingo'(id:240) reason 'reasonmsg=connection lost' 2011-02-05 04:55:20.798517|INFO |VirtualServer | 1| client disconnected 'Maloo roots'(id:196) reason 'reasonmsg=connection lost' 2011-02-05 04:55:20.799314|INFO |VirtualServer | 1| client disconnected 'Cpt dravyn'(id:234) reason 'reasonmsg=connection lost' 2011-02-05 04:55:20.839254|INFO |VirtualServer | 1| client disconnected 'scuba'(id:200) reason 'reasonmsg=connection lost' etc... I need to determine if it is my hosting provider or my server, and what tools I can use to determine the issues. My VPS host has told me this... "I checked out the node that your VPS runs on and there is no abnormal system load, or I/O wait from the drive. I also checked the bandwidth history from the server and there have been no spikes or outages."

    Read the article

  • Debugging IO limitation

    - by Martin F
    I have a Fedora box with some severe IO limitations which I have no idea how to debug. The server has a Areca Technology Corp. ARC-1130 12-Port PCI-X to SATA RAID Controller with 12 7200 RPM 1.5 TB disks and a Marvell Technology Group Ltd. 88E8050 PCI-E ASF Gigabit Ethernet Controller. uname -a output: 2.6.32.11-99.fc12.x86_64 #1 SMP Mon Apr 5 19:59:38 UTC 2010 x86_64 x86_64 x86_64 GNU/Linux The server is a file server running Nginx with the stub status module enabled, so I can see the current amount of connections. The problem present itself when I have a high number of simultaneous connections in a writing state. Usually around 350, at this very moment it's at 590 and the server is almost unusable and stuck at 230mbit/s. If I run stop and hit 1 to see CPU core usages I have all 4 cores with around 99% io wait, if I run iotop the nginx workers are the only processes producing any read load, currently at around 25MB/s. I have each of the workers bound to their own core. Initially I figured it was just the disks being bugged. But I've run fscheck and smartmontools checks and found no errors. I also ran an iozone test which you can see the result of here: http://www.pastie.org/951667.txt?key=fimcvljulnuqy2dcdxa Additionally, when the amount of connections are low I have no problem getting a good speed. If I wget over the local network it easily hits 60MB/sec. Right now I just tried putting a file in /dev/shm, then I symlinked a file from the public dir to it and used wget over the local network and only got 50KB/s. Also, if I try to cp /dev/shm/test /root/test it quickly copies around 740MB and then slows down HEAVILY. Again with iotop reporting 99% iowait. I'm not really sure how to go about figuring out what the problems are. It could be a natural disk limitation but then the file from /dev/shm ought to transfer so it seems there's a network limit, but that's fine when there's not many connections. Perhaps it's a TCP stack problem but I really have no idea how to check that. Any suggestions on how to proceed with debugging would be very welcome. If additional information is required then let me know and I'll try to get it. Thanks.

    Read the article

  • Make error in installing Math support for MediaWiki

    - by Masi
    How can you solve the following Make error in installing MediaWiki? ... /local/lib/site_perl . /etc/perl /usr/local/lib/perl/5.10.0 /usr/local/share/perl/5.10.0 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.10 /usr/share/perl/5.10 /usr/local/lib/site_perl .) at t/maint/php-tag.t line 8. BEGIN failed--compilation aborted at t/maint/php-tag.t line 8. # Looks like your test died before it could output anything. t/maint/php-tag..........dubious Test returned status 255 (wstat 65280, 0xff00) t/maint/unix-newlines....ok Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------- t/00-test.t 127 32512 ?? ?? ?? t/inc/Database.t 127 32512 ?? ?? ?? t/inc/Global.t 127 32512 ?? ?? ?? t/inc/IP.t 127 32512 ?? ?? ?? t/inc/ImageFunctions.t 127 32512 ?? ?? ?? t/inc/Language.t 127 32512 ?? ?? ?? t/inc/Licenses.t 127 32512 ?? ?? ?? t/inc/LocalFile.t 127 32512 ?? ?? ?? t/inc/Parser.t 127 32512 ?? ?? ?? t/inc/Revision.t 127 32512 ?? ?? ?? t/inc/Sanitizer.t 127 32512 ?? ?? ?? t/inc/Search.t 127 32512 ?? ?? ?? t/inc/Title.t 127 32512 ?? ?? ?? t/inc/Xml.t 127 32512 ?? ?? ?? t/maint/php-lint.t 254 65024 966 966 1-966 t/maint/php-tag.t 255 65280 ?? ?? ?? Failed 16/19 test scripts. 966/4248 subtests failed. Files=19, Tests=4248, 46 wallclock secs (33.15 cusr + 10.38 csys = 43.53 CPU) Failed 16/19 test programs. 966/4248 subtests failed. make: *** [test] Error 255

    Read the article

  • How can I force a merge of all WAL files in pg_xlog back into my base "data" directory?

    - by Zac B
    Question: Is there a way to tell Postgres (9.2) to "merge all WAL files in pg_xlog back into the non-WAL data files, and then delete all WAL files successfully merged?" I would like to be able to "force" this operation; i.e. checkpoint_segments or archiving settings should be ignored. The filesystem WAL buffer (pg_xlog) directory should be emptied, or nearly emptied. It's fine if some or all of the space consumed by the pg_xlog directory is then consumed by the data directory; our DBA has asked for WAL database backups without any backlogged WALs, but space consumption is not a concern. Having near-zero WAL activity during this operation is a fine constraint. I can ensure that the database server is either shut down or not connectible (zero user-generated transaction load) during this process. Essentially, I'd like Postgres to ignore archiving/checkpoint retention policies temporarily, and flush all WAL activity to the core database files, leaving pg_xlog in the same state as if the database were recently created--with very few WAL files. What I've Tried: I know that the pg_basebackup utility performs something like this (it generates an almost-all-WALs-merged copy of a Postgres instance's data directory), but we aren't ready to use it on all our systems yet, as we are still testing replication settings; I'm hoping for a more short-term solution. I've tried issuing CHECKPOINT commands, but they just recycle one WAL file and replace it with another (that is, if they do anything at all; if I issue them during database idle time, they do nothing). pg_switch_xlog() similarly just forces a switch to the next log segment; it doesn't flush all queued/buffered segments. I've also played with the pg_resetxlog utility. That utility sort of does what I want, but all of its usage docs seem to indicate that it destroys (rather than flushing out of the transaction log and into the main data files) some or all of the WAL data. Is that impression accurate? If not, can I use pg_resetxlog during a zero-WAL-activity period to force a flush of all queued WAL data to non-WAL data? If the answer to that is negative, how can I achieve this goal? Thanks!

    Read the article

  • Windows Setup could not configure Windows to run on this computer's hardware

    - by Hello71
    The whole installation goes smoothly up to the point of "Completing installation ...". The monitor changes resolution, after which a standard dialog box pops up saying Windows Setup could not configure Windows to run on this computer's hardware Then, in a few seconds, the whole machine powers down. Trying to restart produces the message: STOP: c000021a {Fatal System Error} 0x00000000 (0xc0000001 0x00100448) OR it boots into Setup and comes up with the message: Windows Setup encountered an unexpected error... (This is not the actual error, just paraphrasing) I tried using the OEM restore instead of a regular install, but it fails with the same error. (Even though it worked before...) General specs: HP Pavilion Elite e9262f Intel Core i5-750 Processor ATI Radeon HD 4650 Hitachi HDT721010SLA360 ATA Device 6GB DDR3 RAM SuperMulti DVD Burner with LightScribe Some built-in Wi-Fi module http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01916917 I've tried disconnecting the wireless card and disabling the built-in Ethernet and Firewire via the BIOS, and replacing the wireless keyboard and mouse with wired USB ones. Didn't work. I've also tried changing the SATA controller settings in the BIOS to RAID, AHCI, and IDE, reinstalling each time I changed. Still not working. I think the reason why it is showing the Fatal System Error is because it didn't finish installing before it errored out and shut down, so the system is left in an inconsistent state. I've tried 3 different copies (including the OEM restore) of Windows 7 now, and they're all failing at the same point, with the same error message. I've tried to install Windows 7 maybe 10 times already, with the exact same error message at the exact same location. Hm... Interestingly, the 32-bit version of Windows 7 works, but the 64-bit version doesn't. Perhaps it was a badly burned disk? Reburning the 64-bit version still comes up with the same error. Here's a picture of the side of the case that clearly says it came with Windows 7 64-bit, along with the model number and CPU. sudo fdisk -l: Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0009896f Device Boot Start End Blocks Id System /dev/sda1 * 1 13 104391 7 HPFS/NTFS /dev/sda2 14 94119 755906445 7 HPFS/NTFS /dev/sda3 119922 121602 13492224 7 HPFS/NTFS /dev/sda4 94120 119922 207257740+ 5 Extended /dev/sda5 119527 119922 3170769 82 Linux swap / Solaris /dev/sda6 107174 119526 99225441 83 Linux /dev/sda7 94120 107173 104856192 7 HPFS/NTFS Partition table entries are not in disk order

    Read the article

  • Crashes and freezes after fixing "BOOTMGR is missing" error

    - by Greg-J
    I came back from a 3-day weekend to a computer that was off. I leave my PC on 24/7, so this was odd. Turn it on to get the dreaded "BOOTMGR is missing" screen. Two attempts at Windows Recovery and it booted into Windows fine. After an hour or so, I get a frozen Chrome and my start bar disappears. Ctrl+Alt+Del brings up an error box telling me that Ctrl+Alt+Del failed to work properly. Clicking on any open application triggers an error (I can't recall the error now, but it essentially just said that the application couldn't be found running or something along those lines). I restart, and again, the same thing happens after a while of use. I turn it on, install the 47 updates I have or so, and then restart it. After a while of use (under an hour), it just freezes completely. My thoughts are: SSDs, RAM or PS. My system specs below: (RAID0) 2 x Crucial M4 CT128M4SSD2 2.5" 128GB SATA III MLC Internal Solid State Drive (SSD) CORSAIR Vengeance 16GB (4 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model CML16GX3M4A1600C9 CORSAIR HX Series HX750 750W ATX12V 2.3 / EPS12V 2.91 SLI Ready CrossFire Ready 80 PLUS GOLD Certified Modular Active 1 x ASUS Maximus IV Gene-Z/GEN3 LGA 1155 Intel Z68 HDMI SATA 6Gb/s USB 3.0 Micro ATX Intel Motherboard 1 x Hitachi GST Deskstar 7K1000.C 0F10383 1TB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive 1 x Intel Core i7-2600K Sandy Bridge 3.4GHz (3.8GHz Turbo Boost) LGA 1155 95W Quad-Core Desktop Processor Intel HD Graphics 1 x SAPPHIRE 21197-00-40G Radeon HD 7970 3GB 384-bit GDDR5 PCI Express 3.0 x16 HDCP Ready CrossFireX Support Video Card 1 x Noctua NH-D14 120mm & 140mm SSO CPU Cooler This is all crammed in a pretty small case (NZXT Vulcan) and has been running perfectly problem-free since January. The only thing out of the ordinary is that there is a fan in the case that is now making noise whereas the case has previously been completely silent. I have no reason to believe this is anything more then correlation, but felt it is worth mentioning. I believe it MAY be the SSDs simply because of the BOOTMGR error, but not sure how to test that theory. My belief that it may be the RAM is simply from experience with frozen machines. I haven't had the time to memtest it, but will. The PS being the culprit is something I've picked up by reading similar threads on various forums, and it seems plausible. I am unsure how to test this though. ANY insight whatsover would be greatly appreciated!

    Read the article

  • innobackupex - after restoring - quit without updating PID file

    - by clarkk
    After restoring a backup the server can't start.. restoring # tar -izxf /var/www/bak/db/2013-11-10-1437_mysql.tar.gz -C /var/www/bak/db_import # innobackupex --use-memory=1G --apply-log /var/www/bak/db_import # service mysql stop # mv /var/lib/mysql /var/lib/mysql-old # mkdir /var/lib/mysql # innobackupex --copy-back /var/www/bak/db_import # chown -R mysql:mysql /var/lib/mysql # service mysql start error log 131110 21:24:20 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql 2013-11-10 21:24:21 0 [Warning] TIMESTAMP with implicit DEFAULT value is deprecated. Please use --explicit_defaults_for_timestamp server option (see documentation for more details). 2013-11-10 21:24:21 6194 [Warning] Using pre 5.5 semantics to load error messages from /opt/mysql/server-5.6/share/english/. 2013-11-10 21:24:21 6194 [Warning] If this is not intended, refer to the documentation for valid usage of --lc-messages-dir and --language parameters. 2013-11-10 21:24:21 6194 [Note] Plugin 'FEDERATED' is disabled. /usr/local/mysql/bin/mysqld: Table 'mysql.plugin' doesn't exist 2013-11-10 21:24:21 6194 [ERROR] Can't open the mysql.plugin table. Please run mysql_upgrade to create it. 2013-11-10 21:24:21 6194 [Note] InnoDB: The InnoDB memory heap is disabled 2013-11-10 21:24:21 6194 [Note] InnoDB: Mutexes and rw_locks use GCC atomic builtins 2013-11-10 21:24:21 6194 [Note] InnoDB: Compressed tables use zlib 1.2.3 2013-11-10 21:24:21 6194 [Note] InnoDB: Using Linux native AIO 2013-11-10 21:24:21 6194 [Note] InnoDB: Not using CPU crc32 instructions 2013-11-10 21:24:21 6194 [Note] InnoDB: Initializing buffer pool, size = 128.0M 2013-11-10 21:24:21 6194 [Note] InnoDB: Completed initialization of buffer pool 2013-11-10 21:24:21 6194 [Note] InnoDB: Highest supported file format is Barracuda. 2013-11-10 21:24:22 6194 [Note] InnoDB: 128 rollback segment(s) are active. 2013-11-10 21:24:22 6194 [Note] InnoDB: Waiting for purge to start 2013-11-10 21:24:22 6194 [Note] InnoDB: 5.6.12 started; log sequence number 636992658 2013-11-10 21:24:22 6194 [Note] Server hostname (bind-address): '127.0.0.1'; port: 3306 2013-11-10 21:24:22 6194 [Note] - '127.0.0.1' resolves to '127.0.0.1'; 2013-11-10 21:24:22 6194 [Note] Server socket created on IP: '127.0.0.1'. 2013-11-10 21:24:22 6194 [ERROR] Fatal error: Can't open and lock privilege tables: Table 'mysql.user' doesn't exist 131110 21:24:22 mysqld_safe mysqld from pid file /var/run/mysqld/mysqld.pid ended mysql_upgrade /opt/mysql/server-5.6/bin/mysql_upgrade -u root -pxxxxx -P 3308 Warning: Using a password on the command line interface can be insecure. Looking for 'mysql' as: /opt/mysql/server-5.6/bin/mysql Looking for 'mysqlcheck' as: /opt/mysql/server-5.6/bin/mysqlcheck FATAL ERROR: Upgrade failed

    Read the article

  • Avoid read-write access to bad sectors on HDD to continue working on the HDD

    - by goldenmean
    I have a HP Pavilion dv6446 notebook. It had Windows Vista Home premium. After 4.5+ years of usage, just recently it started malfunctioning. While working fine, its screen goes white or sometimes some thin black lines horizontally. Laptop freezes. Hard reboot works. Again it works for some 2 hrs or so, same error. To diagnose I did run the Memory and Hard disk check which is present in the Bios Setup. Memory test passed. Hard disk test returned an error saying something like - "Replace the hard disk". Bad.. Some sectors or platters have gone bad on the disk. (I confirmed this later by further tests mentioned below) Then I tried installing a Ubuntu 11.10. It listed 3 partitions /dev/sda1, sda2, sda2. It again gave error and could not install grub loader on /dev/sda1. Bad sectors. Then redid the Ubuntu installation, this time asked to to install the Ubuntu on /dev/sda3. and kept /dev/sda1 for /home. Installed fine, and works fine as well. Due to unavailability of WiFi/ Ethernet driver for that adapters under Ubuntu( at least I could not configure them and get the networking working at all), I decided to go back to reinstall windows Vista. It did install fine. I did not have to format one data partition which has my data. I just formatted one partition which installed Windows So in effect HDD has not undergone a full format here. Worked ok for 1 day. But same white screen and freeze happened. Looks like while it is in use, it accesses the bad sectors for storing some data and that's when it bombs. I am inclined to think HDD has not failed fully or crashed but has developed bad sectors. Else if it was a HDD crash, it would have refused to boot at all let alone install on it. Questions: Is there any HDD test check under windows or any such tools windows/linux based ewhere which can identify the bad sectors of the HDD and 'lock/isolate' them from further read-write access of any kind. If not what are my options, if any to salvage this laptop HDD without replacing it. EDIT: Would the Disk Error checking tool under windows help in any way?

    Read the article

  • Why does Ubuntu 9.10 hang during boot at "Booting processor 1 APIC 0x1 ip 0x6000"?

    - by BraeburnDev
    I recently installed a new copy of Ubuntu 9.10 (Kernel 2.6.31-14) on to my Hp Pavilion dv6t, so I can setup a Linux development environment. The install went flawlessly and I proceeded with Ubuntu's udate manager's long list of updates (292 in all). I also setup a swap file and activated a Nvidia 185 driver for the Nvidia 260m GPU on the machine. After all this was done I restarted the computer and booted into Ubuntu this time with a newer 2.6.31-19 Kernel which was installed from the update manager. During booth the computer hung at this point: Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013136] Performance Counters: Nehalem/Corei7 events, Intel PMU driver. Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013141] ... version: 3 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013142] ... bit width: 48 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013144] ... generic counters: 4 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013146] ... value mask: 0000ffffffffffff Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013147] ... max period: 000000007fffffff Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013149] ... fixed-purpose counters: 3 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013151] ... counter mask: 000000070000000f Feb 24 14:23:12 braeburn-laptop kernel: [ 0.015539] ACPI: Core revision 20090521 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.052264] Setting APIC routing to flat Feb 24 14:23:12 braeburn-laptop kernel: [ 0.052639] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.152580] CPU0: Intel(R) Core(TM) i7 CPU Q 720 @ 1.60GHz stepping 05 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.270845] Booting processor 1 APIC 0x1 ip 0x6000 I can post a full kern.log of this boot process if requested. Hopefully this is enough information to go on. I should add that I'm still new to configuring and running a Linux OS although I know enough basic command line usage to do software development. This is my attempt to become more familiar with Linux and manage my own system. I'd like to get some insight on the nature of this system hang, what the problem is and how to resolve it. At this point I can scrap the install if I broke something, but my intuition says this is an issue with the kernel recognizing the correct hardware configuration for my system, or perhaps this is an issue with the APIC drivers managing Nehalem's new power management capabilities? Thanks for looking at this issue and providing feed back.

    Read the article

  • APC ups es 700 randomly overload

    - by Matteo Mosca
    First of all, I live in Italy, Europe, so keep this in mind for Volt/Watt considerations. Standard voltage in Italian apartments is 220V. In my living room I have 2 APC ups, one being an ES-550 and the other an ES-700 They each have 4 slots for surge protection only, and 4 slots for surge protection + battery backup. Just to give all the information, they both got their battery replaced less than one month ago. The ES-550 works fine, without any problem. On the battery I have connected: Pc Monitor Sony Bravia 46'' 4th slot is empty The ES-700 has the following on battery: Xbox 360 Ps3 (standby when not used) Wii (standby when not used) Netgear 8 port switch (always on) Here's what happens: the ES-700, randomly, but mostly at night when I'm sleeping, goes like "overload", with the constant beep. If I try to shut it off keeping the power button pressed, nothing happens. The only thing that works is unplugging random stuff (sometimes unplugging 1 console works, other times I have to unplug all 4 devices). Every time this happens the problem is "real", meaning the 4 devices become unpowered, so it's not just an "alarm no working properly" problem. While I'm sleeping, of course, the power usage is what described on the list, 2 devices on standy, 1 off and 1 on. Today it happened again while I was playing with my Ps3. I unplugged it, problem went away. I plugged it again, and it kept working fine. I just can't figure out what's the problem. The only additional info I can provide is that this behaviour started after a big power outage last december 26 (a blackout that lasted almost all day) but the "surge protection" part of those UPS should be there for those problems, to leverage peaks when power goes away or gets restored. Another funny thing is, althought it might not be related, for a couple of days after that event the Wii was unable to power on, I thought its power transformer was broken, but then it suddenly started working again. I can be sure it's not the Wii overloading the UPS because the overload happens even if I leave the Wii unplugged. Any suggestion is really appreciated, and I can provide any additional info, if needed, that didn't come to mind right now. Thanks.

    Read the article

  • Hyper-V causes boot loop/failure on a non-Gigabyte Win8 Pro system

    - by Nick
    Hardware: Intel i7 2600K (not overclocked, SLAT compatible, virt. features enabled in bios) Asus Maximus IV Extreme-Z (Z68) 16Gb RAM 256Gb SSD Other non-trivial working parts Adding Hyper-V is causing a boot loop resulting in an attempt at automatic repair by Windows 8 after the second or third loop: I'm trying to get the Windows Phone 8 SDK installed and I've narrowed down my troubles to the Hyper-V feature in Win8. This is required to run the WP8 emulator and there are no install options to omit this feature. My first attempt completely borked the OS as I did not have a recent restore point or system image, so I did a completely clean install and made plenty of backups/restore points. I skipped the SDK install and went straight for the windows feature add-on for Hyper-V. This confirmed that Hyper-V is the issue as the same behavior resulted. I cannot find any hint in the Event Logs. Cancelling automatic recovery causes the same behavior to repeat. I don't have any other VM products installed. My only recourse is to use a restore point, try something else, install it again, and see what happens. No luck so far. I'm on my 10th attempt here. Any help would be much appreciated. EDIT: I found a collection of tips here.. http://social.msdn.microsoft.com/Forums/en-US/wptools/thread/b06cc9f2-aa5e-4cb3-9df1-0c273e1dfd68 So i've been attempting various bios settings to resolve this issue with no luck. I've tried setting 'CPUID Limit' to disabled. This seems to work partly as Win8 boots but no USB devices work at all. I also attempted disabling the usb 3.0 controller as the msdn topic lists an issue with USB controllers on Gigabyte boards. This also doesn't work. The USB devices light up but no input is received by the OS. All of my other bios CPU settings are in line with the info in the post. I'm totally stumped. Bios screenshots: http://i.imgur.com/yKN5u.png http://i.imgur.com/Y9wI4.png http://i.imgur.com/F6EuO.png

    Read the article

  • apcupsd on Linux does not report on APC BackUPS Pro 900

    - by lserni
    From what documentation I could find, the UPS should be (is!) supported by Linux and ought to work with apcupsd. I looked for specific problems such as the infamous Microlink protocol, and found none. I have found a feedback from a guy in UK that reports using this very model on a not-too-different OS version (his OpenSuSE 12.1, mine 12.3 x86_64). The USB port is detected, lsusb reports Bus 002 Device 003: ID 051d:0002 American Power Conversion Uninterruptible Power Supply and lsusb -v -s002:003 confirms and expands: Bus 002 Device 003: ID 051d:0002 American Power Conversion Uninterruptible Power Supply Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x051d American Power Conversion idProduct 0x0002 Uninterruptible Power Supply bcdDevice 0.90 iManufacturer 1 American Power Conversion iProduct 2 Back-UPS RS 900G FW:879.L4 .I USB FW:L4 bNumConfigurations 1 Configuration Descriptor: [...] Interface Descriptor: [...] bInterfaceClass 3 Human Interface Device bInterfaceSubClass 0 No Subclass bInterfaceProtocol 0 None iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.00 bCountryCode 33 US bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 1134 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 100 Device Status: 0x0000 (Bus Powered) The kernel recognizes this and duly sets up crw------- 1 root root 180, 96 Nov 4 16:11 /dev/usb/hiddev0 As far as I know, everything is as it should be. I have put the standard configuration in /etc/apcupsd/apcupsd.conf (which is Unix-terminated, ASCII-only, no BOM (just in case)) UPSCABLE usb UPSTYPE usb DEVICE (I have also tried commenting out DEVICE, and setting a device of /dev/puppa results in an access attempt to /dev/puppa, not some /var/lib/dev/puppa or /dev/puppa\r\n). Yet, what apcaccess tells me is VERSION : 3.14.10 (13 September 2011) suse CABLE : USB Cable DRIVER : USB UPS Driver UPSMODE : Stand Alone STARTTIME: 2013-11-04 16:24:22 +0100 MODEL : STATUS : NOBATT LINEV : 000.0 Volts LOADPCT : 0.0 Percent Load Capacity BCHARGE : 000.0 Percent TIMELEFT : 0.0 Minutes MBATTCHG : 5 Percent MINTIMEL : 3 Minutes MAXTIME : 0 Seconds SENSE : Low LOTRANS : 000.0 Volts HITRANS : 000.0 Volts It doesn't recognize the model, and reports no battery (and no voltage). This confirms that it's not the Microlink problem, or it would report the battery status, if precious little else. If I disconnect the USB cable, I get an apcupsd message to the effect that communications have been lost; and I get the "communication restored" broadcast too, if I reconnect the cable. apcupsd is monitoring. So everything tells me that it should work -- only it doesn't. Does anyone spot what I'm missing?

    Read the article

  • Compiling PHP with GD crashes with EXC_BREAKPOINT (SIGTRAP) on PPC Mac

    - by Ömer
    First of all, I should say that I have searched the whole Internet for this problem but I couldn't find any solution yet. I have a Mac mini PowerPC (PPC) and I run Apache webserver (httpd-2.2.22) with PHP (5.4.0) and I do all the configure & compilation jobs by myself. If configure with: './configure' '--prefix=/usr/local/php5' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--sysconfdir=/etc' '--with-config-file-path=/etc' '--with-zlib' '--with-zlib-dir=/usr' '--with-openssl=/usr' '--without-iconv' '--enable-exif' '--enable-ftp' '--enable-mbstring' '--enable-mbregex' '--enable-sockets' '--with-mysql=/usr/local/mysql' '--with-pdo-mysql=/usr/local/mysql' '--with-mysqli=/usr/local/mysql/bin/mysql_config' '--with-apxs2=/usr/local/apache2/bin/apxs' '--with-mcrypt' then the PHP works flawlessly. But if I add the GD module by adding these to the script above: '--with-gd' '--with-jpeg-dir=/usr/local/lib' '--with-freetype-dir=/usr/X11R6' '--with-png-dir=/usr/X11R6' '--with-xpm-dir=/usr/X11R6' the PHP gets configured and compiled without any errors but it causes EXC_BREAKPOINT (SIGTRAP) (see the Crash Reporter log below) when I request a page which calls PHP module. It's obvious that something related to the GD module is causing this, probably FreeType module because it's present in the log but it may not be definite of course. When the PHP crashes (or more accurately, httpd) the CPU goes 100% for 10 to 15 seconds until it recovers. I need to use the GD module and keep the Mac mini PowerPC. So, what should I do to solve this problem? Process: httpd [79852] Path: /usr/local/apache2/bin/httpd Identifier: httpd Version: ??? (???) Code Type: PPC (Native) Parent Process: httpd [79846] Date/Time: 2013-11-04 15:44:28.444 +0200 OS Version: Mac OS X 10.5.8 (9L31a) Report Version: 6 Anonymous UUID: 0178B7F8-2241-43F7-A651-9E7234D41A37 Exception Type: EXC_BREAKPOINT (SIGTRAP) Exception Codes: 0x0000000000000001, 0x0000000093c11e0c Crashed Thread: 0 Application Specific Information: *** single-threaded process forked *** Thread 0 Crashed: 0 com.apple.CoreFoundation 0x93c11e0c __CFRunLoopFindMode + 328 1 com.apple.CoreFoundation 0x93c13d88 CFRunLoopAddSource + 276 2 com.apple.DiskArbitration 0x901a6e8c DAApprovalSessionScheduleWithRunLoop + 52 3 ...ple.CoreServices.CarbonCore 0x9512e67c _FSGetDiskArbSession(__DASession**, __DAApprovalSession**) + 540 4 ...ple.CoreServices.CarbonCore 0x9512e420 CreateDiskArbDiskForMountPath(char const*) + 84 5 ...ple.CoreServices.CarbonCore 0x9512d2c8 FSCacheableClient_GetVolumeCachedInfo(char const*, statfs const*, CachedVolumeInfo*, __DADisk*, __DADisk**) + 280 6 ...ple.CoreServices.CarbonCore 0x9512cca4 MountVolume(char const*, statfs*, unsigned char, unsigned char, __DADisk*, short*) + 352 7 ...ple.CoreServices.CarbonCore 0x9512ca48 MountInitialVolumes() + 172 8 ...ple.CoreServices.CarbonCore 0x9512c4d4 INIT_FileManager() + 164 9 ...ple.CoreServices.CarbonCore 0x9512c390 GetRetainedVolFSVCBByVolumeID(unsigned long) + 48 10 ...ple.CoreServices.CarbonCore 0x9512adf4 PathGetObjectInfo(char const*, unsigned long, unsigned long, VolumeInfo**, unsigned long*, unsigned long*, char*, unsigned long*, unsigned char*) + 184 11 ...ple.CoreServices.CarbonCore 0x9512acc4 FSPathMakeRefInternal(unsigned char const*, unsigned long, unsigned long, FSRef*, unsigned char*) + 64 12 libfreetype.6.dylib 0x0070a0fc FT_New_Face_From_Resource + 56 13 libfreetype.6.dylib 0x0070a3b0 FT_New_Face + 48 14 libphp5.so 0x0118d1a8 fontFetch + 824 15 libphp5.so 0x0118edac php_gd_gdCacheGet + 220 16 libphp5.so 0x0118d6d8 php_gd_gdImageStringFTEx + 360 17 libphp5.so 0x011763c0 php_imagettftext_common + 1504 18 libphp5.so 0x01176494 zif_imagefttext + 20 19 libphp5.so 0x014b9c68 zend_do_fcall_common_helper_SPEC + 1048 20 libphp5.so 0x01452898 _ZEND_DO_FCALL_SPEC_CONST_HANDLER + 440 21 libphp5.so 0x014ba878 execute + 776 22 libphp5.so 0x013f190c zend_execute_scripts + 316 23 libphp5.so 0x013779f4 php_execute_script + 596 24 libphp5.so 0x014bbe64 php_handler + 1972 25 httpd 0x000020c0 ap_run_handler + 96 26 httpd 0x00006ae0 ap_invoke_handler + 224 27 httpd 0x000305c4 ap_process_request + 116 28 httpd 0x0002c768 ap_process_http_connection + 104 29 httpd 0x00012d30 ap_run_process_connection + 96 30 httpd 0x00012ecc ap_process_connection + 92 31 httpd 0x000373e4 child_main + 1220 32 httpd 0x000376a8 make_child + 296 33 httpd 0x000377e4 startup_children + 100 34 httpd 0x000387d4 ap_mpm_run + 3988 35 httpd 0x0000a320 main + 3280 36 httpd 0x000019c0 start + 64

    Read the article

  • Explanation of the init.d/scripts Fedora

    - by Shahmir Javaid
    Below is a copy of vsftpd, i need some explanations of some of the scripts mentioned below in this script: #!/bin/bash # ### BEGIN INIT INFO # Provides: vsftpd # Required-Start: $local_fs $network $named $remote_fs $syslog # Required-Stop: $local_fs $network $named $remote_fs $syslog # Short-Description: Very Secure Ftp Daemon # Description: vsftpd is a Very Secure FTP daemon. It was written completely from # scratch ### END INIT INFO # vsftpd This shell script takes care of starting and stopping # standalone vsftpd. # # chkconfig: - 60 50 # description: Vsftpd is a ftp daemon, which is the program \ # that answers incoming ftp service requests. # processname: vsftpd # config: /etc/vsftpd/vsftpd.conf # Source function library. . /etc/rc.d/init.d/functions # Source networking configuration. . /etc/sysconfig/network RETVAL=0 prog="vsftpd" start() { # Start daemons. # Check that networking is up. [ ${NETWORKING} = "no" ] && exit 1 [ -x /usr/sbin/vsftpd ] || exit 1 if [ -d /etc/vsftpd ] ; then CONFS=`ls /etc/vsftpd/*.conf 2>/dev/null` [ -z "$CONFS" ] && exit 6 for i in $CONFS; do site=`basename $i .conf` echo -n $"Starting $prog for $site: " daemon /usr/sbin/vsftpd $i RETVAL=$? echo if [ $RETVAL -eq 0 ]; then touch /var/lock/subsys/$prog break else if [ -f /var/lock/subsys/$prog ]; then RETVAL=0 break fi fi done else RETVAL=1 fi return $RETVAL } stop() { # Stop daemons. echo -n $"Shutting down $prog: " killproc $prog RETVAL=$? echo [ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/$prog return $RETVAL } # See how we were called. case "$1" in start) start ;; stop) stop ;; restart|reload) stop start RETVAL=$? ;; condrestart|try-restart|force-reload) if [ -f /var/lock/subsys/$prog ]; then stop start RETVAL=$? fi ;; status) status $prog RETVAL=$? ;; *) echo $"Usage: $0 {start|stop|restart|try-restart|force-reload|status}" exit 1 esac exit $RETVAL Question I What the hell is the difference between the && and || signs in the below commands, and is it just an easy way to do a simple if check or is it completely different to a if[..something..]; then ..something.. fi: # Check that networking is up. [ ${NETWORKING} = "no" ] && exit 1 [ -x /usr/sbin/vsftpd ] || exit 1 Question II i get what -eq and -gt is (equal to, greater than) but is there a simple website that explains what -x, -d and -f are? Any help would be apreciated Running Fedora 12 on my OS. Script copied from /etc/init.d/vsftpd Question III It says required starts are $local_fs $network $named $remote_fs $syslog but i cant see any where it checks for those.

    Read the article

  • Win7 x64 unresponsive for a minute or so. HD failing?

    - by Gaia
    On a fully updated Win7 x64, every so often the system stalls for a minute or so. This has been going on for a couple months now. By stalling I mean the mouse responds and I can move windows around, but any window, any program, that is open becomes whiteish when I select it AND any new programs will not open. It doesn't matter what kind of program it is. When the stall stops all clicks I made (open new programs for example) take effect. Nothing shows up consistently (as in every time this happens) in the event log. Today though I was able to find something, but it doesn't reveal much other than the "system was unresponsive". It's a 7009 for "A timeout was reached (30000 milliseconds) while waiting for the Windows Error Reporting Service service to connect." It doesn't matter if I have any USB devices plug-in or not. I've ran Microsoft Security Essentials and Malwarebytes. While the machine is unresponsive, I've noticed that Drive D (the other partition on the single internal HD in this laptop) is displayed like this in explorer. This never occurs with Drive C or any other drive on the machine. . SMART report for the physical drive: Read benchmark by HD Tune 5 Pro, probably the most telling piece of the puzzle. Isn't this alone enough to see there is a problem with the drive, regardless of whether the unresponsiveness is caused by such purported problem? Here is a short hardware report: Computer: LENOVO ThinkPad T520 CPU: Intel Core i5-2520M (Sandy Bridge-MB SV, J1) 2500 MHz (25.00x100.0) @ 797 MHz (8.00x99.7) Motherboard: LENOVO 423946U Chipset: Intel QM67 (Cougar Point) [B3] Memory: 8192 MBytes @ 664 MHz, 9.0-9-9-24 - 4096 MB PC10600 DDR3 SDRAM - Samsung M471B5273CH0-CH9 - 4096 MB PC10600 DDR3 SDRAM - Patriot Memory (PDP Systems) PSD34G13332S Graphics: Intel Sandy Bridge-MB GT2+ - Integrated Graphics Controller [D2/J1/Q0] [Lenovo] Intel HD Graphics 3000 (Sandy Bridge GT2+), 3937912 KB Drive: ST320LT007, 312.6 GB, Serial ATA 3Gb/s Sound: Intel Cougar Point PCH - High Definition Audio Controller [B2] Network: Intel 82579LM (Lewisville) Gigabit Ethernet Controller Network: Intel Centrino Advanced-N 6205 AGN 2x2 HMC OS: Microsoft Windows 7 Professional (x64) Build 7601 The drive less than 1 year old. Do I have a defective drive? Seagate Tools diag says there is nothing wrong with the drive... UPDATE: I noticed that the windows error reporting service entered the running state then the stopped state and the space between the two events was exactly 2 minutes. Which error it was trying to report I don't know. I check the "Reliability Monitor" and it shows no errors to be reported. I've disabled the windows error reporting service to see if the problem stops.

    Read the article

  • eAccelerator settings for PHP/Centos/Apache

    - by bobbyh
    I have eAccelerator installed on a server running Wordpress using PHP/Apache on CentOS. I am occassionally getting persistent "white pages", which presumably are PHP Fatal Errors (although these errors don't appear in my error_log). These "white pages" are sprinkled here and there throughout the site. They persist until I go to my eAccelerator control.php page and clear/clean/purge my caches, which suggests to me that I've configured eAccelerator improperly. Here are my current /etc/php.ini settings: memory_limit = 128M; eaccelerator.shm_size="64", where shm.size is "the amount of shared memory eAccelerator should allocate to cache PHP scripts" (see http://eaccelerator.net/wiki/Settings) eaccelerator.shm_max="0", where shm_max is "the maximum size a user can put in shared memory with functions like eaccelerator_put ... The default value is "0" which disables the limit" eaccelerator.shm_ttl="0" - "When eAccelerator doesn't have enough free shared memory to cache a new script it will remove all scripts from shared memory cache that haven't been accessed in at least shm_ttl seconds. By default this value is set to "0" which means that eAccelerator won't try to remove any old scripts from shared memory." eaccelerator.shm_prune_period="0" - "When eAccelerator doesn't have enough free shared memory to cache a script it tries to remove old scripts if the previous try was made more then "shm_prune_period" seconds ago. Default value is "0" which means that eAccelerator won't try to remove any old script from shared memory." eaccelerator.keys = "shm_only" - "These settings control the places eAccelerator may cache user content. ... 'shm_only' cache[s] data in shared memory" On my phpinfo page, it says: memory_limit 128M Version 0.9.5.3 and Caching Enabled true On my eAccelerator control.php page, it says 64 MB of total RAM available Memory usage 77.70% (49.73MB/ 64.00MB) 27.6 MB is used by cached scripts in the PHP opcode cache (I added up the file sizes myself) 22.1 MB is used by the cache keys, which is populated by the Wordpress object cache. My questions are: Is it true that there is only 36.4 MB of room in the eAccelerator cache for total "cache keys" (64 MB of total RAM minus whatever is taken by cached scripts, which is 27.6 MB at the moment)? What happens if my app tries to write more than 22.1 MB of cache keys to the eAccelerator memory cache? Does this cause eAccelerator to go crazy, like I've seen? If I change eaccelerator.shm_max to be equal to (say) 32 MB, would that avoid this problem? Do I also need to change shm_ttl and shm_prune_period to make eAccelerator respect the MB limit set by shm_max? Thanks! :-)

    Read the article

  • Windows 7, weird/annoying explorer problem

    - by Shiki
    First of all, I'm asking the moderators if you could summarize my problem in the Title and modify it according to that. Thanks in advance and sorry, my english is not that good. The problem. It happened on two of my machines already. Once it happens there are many problems with explorer. I'll try to describe at precisely I just can. So. Basically when you create a new folder, you have to hit the enter key TWICE because first it'll throw an error that "there is no such file..". Okay. Then if you try to delete some, this happens also. Renaming is the same. Here is an example. I tried adding a "2" to the end of the folder name, hit enter and got this. Here I can press cancel, nothing happens. If I press retry, the popup disappears and it'll finally change the folder name. I can't come up with anything for this. Using BitDefender (registered, full protection), Windows 7 x86 Ultimate retail (boxed, english version). The other PC had the same anti-virus protection , but it have a Windows 7 x64. Both systems are activated, updated totally. I don't remember installing any new stuff on the PCs. All the stuff on the PCs are legal, no cracked / any other software present. It just happened, so to say. Already reinstalled the other PC because I thought * I * messed up something and its just something FUBAR. However, I dont want to reinstall my laptop also. Any ideas are welcome. (Today I had a strange bug. Windows Explorer had 1.0+gb memory usage with 100% cpu. Killed it, launched a new explorer.exe and thats all. Nothing changed, but it may worth a try. The other PC did NOT have this problem, ever.) Isn't there a registry fix for this or something? :/

    Read the article

  • Why does unpartitioned Hitachi HDS5C3020 drive start consuming 50% more power 15 minutes after boot?

    - by Pro Backup
    In a Debian 6.0.6 system there are 74 pieces of 2TB Toshiba DT01ABA200 drives. These drives are identified as Hitachi HDS5C3020BLE630 drives running firmware revision MZ4OAAB0. 64 Drives attached via HP SAS expander cards to an LSI 2008 SAS controller, another 5 drives are connected directly to the mainboard, 4 drives are connected to a Sil based PCI controller and last 1 drive is only powered and has no data cable connected. The controller LSI and Sil card's their onboard BIOS are both disabled and the mpt2sas and sata_sil modules are removed from the Linux debian 2.6.32-5-amd64 #1 SMP Sun Sep 23 10:07:46 UTC 2012 x86_64 GNU/Linux kernel. The mpt2sas module is loaded after boot using a modprobe command in /etc/rc.local. These 74 drives are not partitioned, neither formatted and also not mounted. The system consumes: with 0 drives: 70.6 - 70.9 Watt (also 15 minutes after boot); with 74 drives: 330 - 360 Watt, just after boot (is equivalent to 3.5 - 3.9W per drive in idle state); with 74 drives: 420 - 466 Watt, each time in the 15th minute of uptime (is equivalent to 4.7 - 5.3W per drive in idle state). The drive specification lists 4.7W as read/write, and 3.3W as idle power consumption. The increased power consumption is most likely on the 5V line, because after roughly 1 minute an "over current protection" (OCP) of the power supply (PSU) shuts down the power. The used PSU is a single rail model with an OCP of 122A on the 12V line and 55A on the 5V line. Regression: It doesn't matter whether the drive its APM value is set to disabled or 1 (maximum power saving). The operating system records no read/write activity in /proc/diskstats. The values there are identical (28 read, 0 write operations) as immediately after the modprobe operation. Can't test what happens when booting into the mainboard it's BIOS - to exclude any OS intervention - because the Super Micro X8SI6-F mainboard running firmware 06/27/12 has a bug that incorrectly reads a +74.0 C CPU sensor temperature as "High" in BIOS mode, and shuts down the power after 1 minute. What might be causing the drive read/write activity on all drives in the 15th minute after boot and how to prevent it from happening?

    Read the article

  • Apache server completely freezes until it gets restarted

    - by nbv4
    My server does this every few days. What sucks is that it always seems to do this right after I go to bed, so when I wake up, I'm greeted with the fact that my server has been down for the past 6 or 7 hours. When I first noticed this, I added a cronjob that tries to restart the server every 15 minutes, but I guess that didn't fix it. Once I noticed the server was down, I can this command: /etc/init.d/apache2 restart * Restarting web server apache2 apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName ... waiting ...........................................................apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName httpd (pid 17597) already running ...which is odd, because a restart should restart the server, even if it's already running, correct? I eventually had to "stop" then "start" to get it working again. I then looked through the logs, and found something very weird. It seems that around the time the server crashed, the logs have entries that are wildly out of order. It looks a little like this: xx.xxx.xxx.x - - [21/Apr/2010:06:32:05 -0400] "GET / blah" xx.xxx.xxx.x - - [21/Apr/2010:06:51:25 -0400] "GET / blah" x.xx.xxx.xxx - - [21/Apr/2010:06:38:23 -0400] "GET / blah" xxx.xx.xx.xx - - [21/Apr/2010:06:31:56 -0400] "GET / blah" xxx.xx.xx.xx - - [21/Apr/2010:06:51:49 -0400] "GET / blah" xx.xx.xxx.xx - - [21/Apr/2010:06:33:20 -0400] "GET / blah" I don't think the problem is memory, because this: tells me that right before the crash, memory usage is fine. I'm running apache with the worker mpm, here are the settings for that: <IfModule mpm_worker_module> StartServers 1 MaxClients 100 MinSpareThreads 5 MaxSpareThreads 10 ThreadsPerChild 10 MaxRequestsPerChild 3000 </IfModule> This apache server is running a bunch of stuff, but most of the traffic comes from a django project I'm hosting, that uses mod_wsgi. There also is a simple machines forum that is running off of mod_fcgid. Those setting are below: <IfModule mod_fcgid.c> MaxRequestsPerProcess 500 MaxProcessCount 3 AddHandler fcgid-script .php .fcgi AddHandler cgi-script .cgi .pl FCGIWrapper "/usr/bin/php-cgi" .php </IfModule> Anyone know of anything else I can check? I've just about tweaked every single setting I can think of, yet these freezes still happen.

    Read the article

  • Too many sleeping processes?

    - by user55859
    I'm running Debian Lenny (x86_64) on a cloud VPS (Xen) and top command tells me there are 210 processes running and 209 are sleeping: top - 14:49:29 up 15:18, 1 user, load average: 0.09, 0.11, 0.05 Tasks: 210 total, 1 running, 209 sleeping, 0 stopped, 0 zombie Cpu(s): 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 532288k total, 437316k used, 94972k free, 30584k buffers Swap: 1048568k total, 408k used, 1048160k free, 219772k cached And here is what ps aux command gives me: USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 1 0.0 0.1 10380 812 ? Ss Sep30 0:00 init [2] root 2 0.0 0.0 0 0 ? S< Sep30 0:00 [kthreadd] root 3 0.0 0.0 0 0 ? S< Sep30 0:00 [migration/0] root 4 0.0 0.0 0 0 ? S< Sep30 0:00 [ksoftirqd/0] root 5 0.0 0.0 0 0 ? S< Sep30 0:00 [events/0] root 6 0.0 0.0 0 0 ? S< Sep30 0:00 [khelper] root 7 0.0 0.0 0 0 ? S< Sep30 0:05 [xenwatch] root 8 0.0 0.0 0 0 ? S< Sep30 0:13 [xenbus] root 10 0.0 0.0 0 0 ? S< Sep30 0:00 [migration/1] root 11 0.0 0.0 0 0 ? S< Sep30 0:00 [ksoftirqd/1] root 12 0.0 0.0 0 0 ? S< Sep30 0:00 [events/1] root 13 0.0 0.0 0 0 ? S< Sep30 0:00 [migration/2] root 14 0.0 0.0 0 0 ? S< Sep30 0:00 [ksoftirqd/2] root 15 0.0 0.0 0 0 ? S< Sep30 0:00 [events/2] root 16 0.0 0.0 0 0 ? S< Sep30 0:00 [migration/3] root 17 0.0 0.0 0 0 ? S< Sep30 0:00 [ksoftirqd/3] root 18 0.0 0.0 0 0 ? S< Sep30 0:00 [events/3] root 19 0.0 0.0 0 0 ? S< Sep30 0:00 [migration/4] root 20 0.0 0.0 0 0 ? S< Sep30 0:00 [ksoftirqd/4] root 21 0.0 0.0 0 0 ? S< Sep30 0:00 [events/4] root 22 0.0 0.0 0 0 ? S< Sep30 0:00 [migration/5] root 23 0.0 0.0 0 0 ? S< Sep30 0:00 [ksoftirqd/5] root 24 0.0 0.0 0 0 ? S< Sep30 0:00 [events/5] root 25 0.0 0.0 0 0 ? S< Sep30 0:00 [migration/6] root 26 0.0 0.0 0 0 ? S< Sep30 0:00 [ksoftirqd/6] root 27 0.0 0.0 0 0 ? S< Sep30 0:00 [events/6] root 28 0.0 0.0 0 0 ? S< Sep30 0:00 [migration/7] root 29 0.0 0.0 0 0 ? S< Sep30 0:00 [ksoftirqd/7] root 30 0.0 0.0 0 0 ? S< Sep30 0:00 [events/7] root 31 0.0 0.0 0 0 ? S< Sep30 0:00 [migration/8] root 32 0.0 0.0 0 0 ? S< Sep30 0:00 [ksoftirqd/8] root 33 0.0 0.0 0 0 ? S< Sep30 0:00 [events/8] root 34 0.0 0.0 0 0 ? S< Sep30 0:00 [migration/9] root 35 0.0 0.0 0 0 ? S< Sep30 0:00 [ksoftirqd/9] root 36 0.0 0.0 0 0 ? S< Sep30 0:00 [events/9] root 37 0.0 0.0 0 0 ? S< Sep30 0:00 [migration/10] root 38 0.0 0.0 0 0 ? S< Sep30 0:00 [ksoftirqd/10] root 39 0.0 0.0 0 0 ? S< Sep30 0:04 [events/10] root 40 0.0 0.0 0 0 ? S< Sep30 0:00 [migration/11] root 41 0.0 0.0 0 0 ? S< Sep30 0:00 [ksoftirqd/11] root 42 0.0 0.0 0 0 ? S< Sep30 0:00 [events/11] root 43 0.0 0.0 0 0 ? S< Sep30 0:00 [migration/12] root 44 0.0 0.0 0 0 ? S< Sep30 0:00 [ksoftirqd/12] root 45 0.0 0.0 0 0 ? S< Sep30 0:00 [events/12] root 46 0.0 0.0 0 0 ? S< Sep30 0:00 [migration/13] root 47 0.0 0.0 0 0 ? S< Sep30 0:00 [ksoftirqd/13] root 48 0.0 0.0 0 0 ? S< Sep30 0:00 [events/13] root 49 0.0 0.0 0 0 ? S< Sep30 0:00 [migration/14] root 50 0.0 0.0 0 0 ? S< Sep30 0:00 [ksoftirqd/14] root 51 0.0 0.0 0 0 ? S< Sep30 0:00 [events/14] root 52 0.0 0.0 0 0 ? S< Sep30 0:00 [migration/15] root 53 0.0 0.0 0 0 ? S< Sep30 0:00 [ksoftirqd/15] root 54 0.0 0.0 0 0 ? S< Sep30 0:00 [events/15] root 55 0.0 0.0 0 0 ? S< Sep30 0:00 [kintegrityd/0] root 56 0.0 0.0 0 0 ? S< Sep30 0:00 [kintegrityd/1] root 57 0.0 0.0 0 0 ? S< Sep30 0:00 [kintegrityd/2] root 58 0.0 0.0 0 0 ? S< Sep30 0:00 [kintegrityd/3] root 59 0.0 0.0 0 0 ? S< Sep30 0:00 [kintegrityd/4] root 60 0.0 0.0 0 0 ? S< Sep30 0:00 [kintegrityd/5] root 61 0.0 0.0 0 0 ? S< Sep30 0:00 [kintegrityd/6] root 62 0.0 0.0 0 0 ? S< Sep30 0:00 [kintegrityd/7] root 63 0.0 0.0 0 0 ? S< Sep30 0:00 [kintegrityd/8] root 64 0.0 0.0 0 0 ? S< Sep30 0:00 [kintegrityd/9] root 65 0.0 0.0 0 0 ? S< Sep30 0:00 [kintegrityd/10] root 66 0.0 0.0 0 0 ? S< Sep30 0:00 [kintegrityd/11] root 67 0.0 0.0 0 0 ? S< Sep30 0:00 [kintegrityd/12] root 68 0.0 0.0 0 0 ? S< Sep30 0:00 [kintegrityd/13] root 69 0.0 0.0 0 0 ? S< Sep30 0:00 [kintegrityd/14] root 70 0.0 0.0 0 0 ? S< Sep30 0:00 [kintegrityd/15] root 71 0.0 0.0 0 0 ? S< Sep30 0:00 [kblockd/0] root 72 0.0 0.0 0 0 ? S< Sep30 0:00 [kblockd/1] root 73 0.0 0.0 0 0 ? S< Sep30 0:00 [kblockd/2] root 74 0.0 0.0 0 0 ? S< Sep30 0:00 [kblockd/3] root 75 0.0 0.0 0 0 ? S< Sep30 0:00 [kblockd/4] root 76 0.0 0.0 0 0 ? S< Sep30 0:00 [kblockd/5] root 77 0.0 0.0 0 0 ? S< Sep30 0:00 [kblockd/6] root 78 0.0 0.0 0 0 ? S< Sep30 0:00 [kblockd/7] root 79 0.0 0.0 0 0 ? S< Sep30 0:00 [kblockd/8] root 80 0.0 0.0 0 0 ? S< Sep30 0:00 [kblockd/9] root 81 0.0 0.0 0 0 ? S< Sep30 0:00 [kblockd/10] root 82 0.0 0.0 0 0 ? S< Sep30 0:00 [kblockd/11] root 83 0.0 0.0 0 0 ? S< Sep30 0:00 [kblockd/12] root 84 0.0 0.0 0 0 ? S< Sep30 0:00 [kblockd/13] root 85 0.0 0.0 0 0 ? S< Sep30 0:00 [kblockd/14] root 86 0.0 0.0 0 0 ? S< Sep30 0:00 [kblockd/15] root 87 0.0 0.0 0 0 ? S< Sep30 0:00 [cqueue] root 88 0.0 0.0 0 0 ? S< Sep30 0:00 [kseriod] root 89 0.0 0.0 0 0 ? S Sep30 0:00 [pdflush] root 90 0.0 0.0 0 0 ? S Sep30 0:00 [pdflush] root 91 0.0 0.0 0 0 ? S< Sep30 0:00 [kswapd0] root 92 0.0 0.0 0 0 ? S< Sep30 0:00 [aio/0] root 93 0.0 0.0 0 0 ? S< Sep30 0:00 [aio/1] root 94 0.0 0.0 0 0 ? S< Sep30 0:00 [aio/2] root 95 0.0 0.0 0 0 ? S< Sep30 0:00 [aio/3] root 96 0.0 0.0 0 0 ? S< Sep30 0:00 [aio/4] root 97 0.0 0.0 0 0 ? S< Sep30 0:00 [aio/5] root 98 0.0 0.0 0 0 ? S< Sep30 0:00 [aio/6] root 99 0.0 0.0 0 0 ? S< Sep30 0:00 [aio/7] root 100 0.0 0.0 0 0 ? S< Sep30 0:00 [aio/8] root 101 0.0 0.0 0 0 ? S< Sep30 0:00 [aio/9] root 102 0.0 0.0 0 0 ? S< Sep30 0:00 [aio/10] root 103 0.0 0.0 0 0 ? S< Sep30 0:00 [aio/11] root 104 0.0 0.0 0 0 ? S< Sep30 0:00 [aio/12] root 105 0.0 0.0 0 0 ? S< Sep30 0:00 [aio/13] root 106 0.0 0.0 0 0 ? S< Sep30 0:00 [aio/14] root 107 0.0 0.0 0 0 ? S< Sep30 0:00 [aio/15] root 108 0.0 0.0 0 0 ? S< Sep30 0:00 [kpsmoused] root 167 0.0 0.0 0 0 ? S< Sep30 0:00 [net_accel/0] root 168 0.0 0.0 0 0 ? S< Sep30 0:00 [net_accel/1] root 169 0.0 0.0 0 0 ? S< Sep30 0:00 [net_accel/2] root 170 0.0 0.0 0 0 ? S< Sep30 0:00 [net_accel/3] root 171 0.0 0.0 0 0 ? S< Sep30 0:00 [net_accel/4] root 172 0.0 0.0 0 0 ? S< Sep30 0:00 [net_accel/5] root 173 0.0 0.0 0 0 ? S< Sep30 0:00 [net_accel/6] root 174 0.0 0.0 0 0 ? S< Sep30 0:00 [net_accel/7] root 175 0.0 0.0 0 0 ? S< Sep30 0:00 [net_accel/8] root 176 0.0 0.0 0 0 ? S< Sep30 0:00 [net_accel/9] root 177 0.0 0.0 0 0 ? S< Sep30 0:00 [net_accel/10] root 178 0.0 0.0 0 0 ? S< Sep30 0:00 [net_accel/11] root 179 0.0 0.0 0 0 ? S< Sep30 0:00 [net_accel/12] root 180 0.0 0.0 0 0 ? S< Sep30 0:00 [net_accel/13] root 181 0.0 0.0 0 0 ? S< Sep30 0:00 [net_accel/14] root 182 0.0 0.0 0 0 ? S< Sep30 0:00 [net_accel/15] root 315 0.0 0.0 0 0 ? S< Sep30 0:00 [xfs_mru_cache] root 316 0.0 0.0 0 0 ? S< Sep30 0:00 [xfslogd/0] root 317 0.0 0.0 0 0 ? S< Sep30 0:00 [xfslogd/1] root 318 0.0 0.0 0 0 ? S< Sep30 0:00 [xfslogd/2] root 319 0.0 0.0 0 0 ? S< Sep30 0:00 [xfslogd/3] root 320 0.0 0.0 0 0 ? S< Sep30 0:00 [xfslogd/4] root 321 0.0 0.0 0 0 ? S< Sep30 0:00 [xfslogd/5] root 322 0.0 0.0 0 0 ? S< Sep30 0:00 [xfslogd/6] root 323 0.0 0.0 0 0 ? S< Sep30 0:00 [xfslogd/7] root 324 0.0 0.0 0 0 ? S< Sep30 0:00 [xfslogd/8] root 325 0.0 0.0 0 0 ? S< Sep30 0:00 [xfslogd/9] root 326 0.0 0.0 0 0 ? S< Sep30 0:00 [xfslogd/10] root 327 0.0 0.0 0 0 ? S< Sep30 0:00 [xfslogd/11] root 328 0.0 0.0 0 0 ? S< Sep30 0:00 [xfslogd/12] root 329 0.0 0.0 0 0 ? S< Sep30 0:00 [xfslogd/13] root 330 0.0 0.0 0 0 ? S< Sep30 0:00 [xfslogd/14] root 331 0.0 0.0 0 0 ? S< Sep30 0:00 [xfslogd/15] root 332 0.0 0.0 0 0 ? S< Sep30 0:00 [xfsdatad/0] root 333 0.0 0.0 0 0 ? S< Sep30 0:00 [xfsdatad/1] root 334 0.0 0.0 0 0 ? S< Sep30 0:00 [xfsdatad/2] root 335 0.0 0.0 0 0 ? S< Sep30 0:00 [xfsdatad/3] root 336 0.0 0.0 0 0 ? S< Sep30 0:00 [xfsdatad/4] root 337 0.0 0.0 0 0 ? S< Sep30 0:00 [xfsdatad/5] root 338 0.0 0.0 0 0 ? S< Sep30 0:00 [xfsdatad/6] root 339 0.0 0.0 0 0 ? S< Sep30 0:00 [xfsdatad/7] root 340 0.0 0.0 0 0 ? S< Sep30 0:00 [xfsdatad/8] root 341 0.0 0.0 0 0 ? S< Sep30 0:00 [xfsdatad/9] root 342 0.0 0.0 0 0 ? S< Sep30 0:00 [xfsdatad/10] root 343 0.0 0.0 0 0 ? S< Sep30 0:00 [xfsdatad/11] root 344 0.0 0.0 0 0 ? S< Sep30 0:00 [xfsdatad/12] root 345 0.0 0.0 0 0 ? S< Sep30 0:00 [xfsdatad/13] root 346 0.0 0.0 0 0 ? S< Sep30 0:00 [xfsdatad/14] root 347 0.0 0.0 0 0 ? S< Sep30 0:00 [xfsdatad/15] root 399 0.0 0.0 0 0 ? S< Sep30 0:00 [jfsIO] root 400 0.0 0.0 0 0 ? S< Sep30 0:00 [jfsCommit] root 401 0.0 0.0 0 0 ? S< Sep30 0:00 [jfsCommit] root 402 0.0 0.0 0 0 ? S< Sep30 0:00 [jfsCommit] root 403 0.0 0.0 0 0 ? S< Sep30 0:00 [jfsCommit] root 404 0.0 0.0 0 0 ? S< Sep30 0:00 [jfsCommit] root 405 0.0 0.0 0 0 ? S< Sep30 0:00 [jfsCommit] root 406 0.0 0.0 0 0 ? S< Sep30 0:00 [jfsCommit] root 407 0.0 0.0 0 0 ? S< Sep30 0:00 [jfsCommit] root 408 0.0 0.0 0 0 ? S< Sep30 0:00 [jfsCommit] root 409 0.0 0.0 0 0 ? S< Sep30 0:00 [jfsCommit] root 410 0.0 0.0 0 0 ? S< Sep30 0:00 [jfsCommit] root 411 0.0 0.0 0 0 ? S< Sep30 0:00 [jfsCommit] root 412 0.0 0.0 0 0 ? S< Sep30 0:00 [jfsCommit] root 413 0.0 0.0 0 0 ? S< Sep30 0:00 [jfsCommit] root 414 0.0 0.0 0 0 ? S< Sep30 0:00 [jfsCommit] root 415 0.0 0.0 0 0 ? S< Sep30 0:00 [jfsCommit] root 416 0.0 0.0 0 0 ? S< Sep30 0:00 [jfsSync] root 673 0.0 0.0 0 0 ? S< Sep30 0:00 [kjournald] root 727 0.0 0.1 16840 960 ? S<s Sep30 0:00 udevd --daemon root 1273 0.0 0.3 122036 2016 ? Sl Sep30 0:00 /usr/sbin/rsyslogd -c3 root 1306 0.0 0.2 48960 1224 ? Ss Sep30 0:00 /usr/sbin/sshd root 1809 0.0 0.2 21276 1076 ? Ss Sep30 0:00 /usr/sbin/cron root 1873 0.0 1.5 41460 8360 ? Ss Sep30 0:02 /usr/sbin/munin-node root 1896 0.0 0.1 3864 608 tty1 Ss+ Sep30 0:00 /sbin/getty 38400 tty1 root 1897 0.0 0.1 3864 604 tty2 Ss+ Sep30 0:00 /sbin/getty 38400 tty2 root 1898 0.0 0.1 3864 604 tty3 Ss+ Sep30 0:00 /sbin/getty 38400 tty3 root 1899 0.0 0.1 3864 608 tty4 Ss+ Sep30 0:00 /sbin/getty 38400 tty4 root 1900 0.0 0.1 3864 608 tty5 Ss+ Sep30 0:00 /sbin/getty 38400 tty5 root 1901 0.0 0.1 3864 604 tty6 Ss+ Sep30 0:00 /sbin/getty 38400 tty6 101 4526 0.0 0.1 42820 1052 ? Ss 12:27 0:00 /usr/sbin/exim4 -bd -q30m root 8865 0.0 0.2 11668 1432 pts/0 S 13:18 0:00 /bin/sh /usr/bin/mysqld_safe mysql 8980 0.0 9.0 175284 48368 pts/0 Sl 13:18 0:05 /usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --user=mysql --pid-file=/var/run/my root 8981 0.0 0.1 6480 684 pts/0 S 13:18 0:00 logger -t mysqld -p daemon.error root 13730 0.0 0.8 149144 4712 ? Ss 14:05 0:00 /usr/bin/php5-fpm --fpm-config /etc/php5/fpm/php5-fpm.conf www-data 13731 0.2 11.4 172756 61136 ? S 14:05 0:05 /usr/bin/php5-fpm --fpm-config /etc/php5/fpm/php5-fpm.conf www-data 13732 0.2 8.9 158516 47712 ? S 14:05 0:05 /usr/bin/php5-fpm --fpm-config /etc/php5/fpm/php5-fpm.conf www-data 13733 0.1 8.1 156576 43468 ? S 14:05 0:04 /usr/bin/php5-fpm --fpm-config /etc/php5/fpm/php5-fpm.conf root 14601 0.0 0.2 30600 1240 ? Ss 14:15 0:00 nginx: master process /usr/sbin/nginx www-data 14602 0.0 0.3 30976 1836 ? S 14:15 0:00 nginx: worker process www-data 14603 0.0 0.3 30976 1836 ? S 14:15 0:00 nginx: worker process www-data 14604 0.0 0.5 31552 2852 ? S 14:15 0:00 nginx: worker process www-data 14605 0.0 0.4 31240 2580 ? S 14:15 0:00 nginx: worker process www-data 14606 0.0 0.3 30976 1836 ? S 14:15 0:00 nginx: worker process www-data 14607 0.0 0.3 30976 1836 ? S 14:15 0:00 nginx: worker process www-data 14608 0.0 0.4 31244 2536 ? S 14:15 0:00 nginx: worker process www-data 14609 0.0 0.5 31544 2788 ? S 14:15 0:00 nginx: worker process root 17169 0.0 0.2 17456 1160 pts/0 R+ 14:45 0:00 ps aux root 26391 0.0 0.6 66168 3284 ? Ss 10:32 0:00 sshd: root@notty root 26394 0.0 0.3 42376 2120 ? Ss 10:32 0:00 /usr/lib/openssh/sftp-server root 31500 0.0 0.6 66140 3248 ? Ss 11:33 0:00 sshd: root@pts/0 root 31503 0.0 0.3 20248 1924 pts/0 Ss 11:33 0:00 -bash root 31509 0.0 0.6 66168 3264 ? Ss 11:34 0:00 sshd: root@notty root 31512 0.0 0.3 42180 1984 ? Ss 11:34 0:00 /usr/lib/openssh/sftp-server I'm wondering if this is normal situation? Do I need all of those process? Thanks for any suggestions!

    Read the article

  • DCHP and Router load testing

    - by John H
    I manage a campground wifi network with an average of 10 - 60 active users. I have encountered issues where the router starts acting flaky (failing to assign DHCP or failing to pass traffic) without any clear warning (low cpu utilization, etc). I upgraded the router a couple times and ended up with a Netgear ProSafe VPN router that seems to be handling the traffic. The interesting thing is that the Netgear has lower specs than the Buffalo router it replaced, indicating the issue is with the DD-WRT firmware. While I'll be pursuing this issue on the dd-wrt forums, I need a way to test routers. My vision is having 1-2 computers connected on the LAN side and 1-2 computers connected on the WAN side. I want the LAN computers to be generating various type of traffic and connections, as well as requesting DCHP addresses. A few notes: The wireless aspect should be a non-issue. Most clients would connect to a wireless bridge and come into the router through a network cable. I had a monitoring server with Nagios running check_dhcp against the router. This server was connected directly by a network cable, eliminating wifi bridges and other devices from the equation. This question is somewhat related, but not exactly: Load testing wireless LANs I am going to look at IxChariot. While I'd ideally like to use a 1 computer on each side running Linux and preferably free software, I can entertain running Windows, multiple computers, or non-free software. Total bandwidth doesn't seem to be the issue. I can transfer large files all day. Even on the busiest days, the users seemed to only pull ~5Mbps. There is very little "LAN to LAN traffic" and most of it might never have reached the main router. The issue I need to test for seems to be tied to active users, or more appropriately, active sessions. I know active users or active clients is a meaningless term from a router standpoint and wouldn't mind having more appropriate terms to use. Summary: I need a way to test a routers ability in handling traffic from a large number of clients. My current strategy is to purchase a router, deploy it, and see how it fails in the live environment.

    Read the article

  • Microsoft Office 2003 document (Excel and Word) intermitently, takes 30 seconds to load

    - by Julio Nobre
    I am trying to figure out why a simple .XLS EXCEL workbook is taking, randomly, 30 seconds to open. Before answering: Please, bear mind the following: Problem symptoms Hanging is intermitent and it takes exactly 30 seconds; During hanging there is no cpu or disk activity; It only happens during document load. Every runs smooth after that; Windows Explorer.exe hangs on folder, but all other folders, system and applications are still responsive; There are no consecutive hangings. I have to wait for while to reproduce this behaviour; All samples documents are located on a local drive (C:\BPI); The no document has has macros and have any addins usage; The problem does occurs on others files extensions like .PDF, for example; Office 2003 is being used for several years; The computer is running Windows XP; Computer has several network mapped drives, all addressed to main file server; Recently, main fileserver was replaced by Windows 2011 SBS Standard Edition What I have done so far I have traced machine Explorer.exe, using Process Monitor, added Duration column, and filtered by Duration 1. That's is how I found that hanging was taking exactly 30 seconds. For further information, please refer to Oliver Salzburg tutorial. Using Process Monitor, I have also figured out than five operations were taking most of sample collecting duration. Looking at sample image below, column Operation below you will notice that one single operation was taking 29 seconds; I have tried different documents (.xls and .doc), all of them smaller than 30 KB; I have, temporarily, removed all shortcuts on User Document's folder that were pointing to network drives or shares; I have runned CCleaner to fix registry issues; I made sure that there were no external links on tested workbook or word documents; I have reproduced this behaviour for hours; I have extensivelly researched for hours on the web; Process Monitor's collected and filtered data

    Read the article

< Previous Page | 374 375 376 377 378 379 380 381 382 383 384 385  | Next Page >