Search Results

Search found 1379 results on 56 pages for 'forwarding'.

Page 38/56 | < Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >

• LinkSys WRT54GL + AM200 in half-bridge mode - UK setup guide recommendations?

  - by Peter Mounce

  Crossposted from here I am basically looking for a good guide on how to set up my home network with this set of hardware. I need: Dynamic DNS Firewall + port-forwarding VPN Wake-on-LAN from outside firewall VOIP would be nice QoS would be nice (make torrents take lower priority to other services when those other services are happening) DHCP Wireless + WPA2 security Ability to play multiplayer computer games I am not a networking or computing neophyte, but the last time I messed with network gear was a few years ago, so am needing to dust off knowledge I kinda half have. I have read that I should be wanting to set up the AM200 in half-bridge mode, so that the WRT54GL gets the WAN IP - this sounds like a good idea, but I'd still like to be advised. I have read that the dd-wrt firmware will meet my needs (though I gather I'll need the vpn-specific build, which appears to preclude supporting VOIP), but I'm not wedded to using it. I live in the UK and my ISP supplies me with: a block of 8 static IPs, of which 5 are usable to me a PPPoA ADSL2+ connection

  Read the article

• How to port forward https traffic via ssh and/or remote desktop to through several networks and PCs?

  - by donttellya

  I have the following environment: In company X I develop a application on a pc A in network A with ip address 192.168.100.50 which has to do an https request to an http server located in the intranet of company Y In company X is another pc B in network B with ip address 192.168.200.100 pc B (of company X) can access the intranet from company Y via ssh tunnel (putty) pc A (of company X) can ping pc B (of company X) note: pc A can also do a remote desktop connection to pc B) pc B can ping the http sever pc A can not ping the http server How can the https request from pc A of company X get to the http server of company Y? On which pc must be putty configured? And which settings for host, port forwarding etc. has to be done in putty? So finally the https request should go from PC A - PC B - Http Server in company Y.

  Read the article

• ssh: which side is running the SOCKS proxy?

  - by Barry Brown

  When I set up a tunnel using dynamic forwarding (ssh -D), which side is running the SOCKS proxy? That is, is the proxy running on the local end (client) or the remote end (server)? Here's the situation: I want to set up several tunnels chained together using -L. Should the -D tunnel be the last one in the chain or the first one? Edit: I found the answer to the second paragraph on Super User (the -D tunnel should be at the remotest end). But I'd still like to know where the proxy code is running.

  Read the article

• Hosting a web site at home: ISP Blocking port 80?

  - by tombull89

  Hello, I presume this is a better place to put this rather than server fault. I'm interested in setting up a small site to host at home as a "proof of concept" exercise, i.e. to prrove that I know how to do it. I've got a (virtual) server 2003 machine with a site on it, all configured with port forwarding through to 80 on my server. I have a Belkin F5D7634 which I have put my DYNDNS details in but when I try to go to my DYNDNS address it comes up with the page cannot be displayed. My ISP is Carphone Warehouse/AOL and I've been unable to find any information if they block port 80. If they do, can anybody reccomend a home provider that does not block port 80? Regards, Tom.

  Read the article

• IIS not listening over external network, all other traffic working

  - by Beuy

  Hello there, I have a very odd situation, I have a server (let's call it X) running 2008 R2 with two NIC's in it, one is connected to the work domain and has a subnet of 192.168.10.0/24 the other is connected to a ADSL connection and has a subnet of 192.168.1.0/24. The server has IIS installed. On the ADSL connection I have setup a dynamic dns and port forwarding to allow external HTTP, HTTPS, FTP and RDP connections. FTP and RDP are working fine however neither HTTP or HTTPS are working at all. I can browse the websites by going to localhost on the machine, the HTTP and HTTPS ports appear as "Filtered" when I try to scan them using PortQueryUI and browsers respond with a "Server took too long to load or was not responding" error. This was working fine just a few days ago, Windows firewall is disabled I don't have any software firewall on it. And I'm really lost. Any help would be great.

  Read the article

• virtualbox and nginx server_name

  - by Ivan

  I'm trying to configure gitlab running in an Ubuntu 12.04 guest with Windows7 host. I can ssh the guest using port-forwarding and access the nginx server using port redirection (8888 in host is 80 in guest, so localhost:8888 in host gets to the nginx server in the guest), but the server_name in nginx configuration file is giving me trouble. What is the correct listen and server_name that nginx would accept? The guest has the NAT interface at 10.0.2.15 and Host-Only interface at 192.168.56.101, static. Thanks!

  Read the article

• A design for watching IPTV anywhere in the house?

  - by Carlos

  I'm currently getting TV and internet via IP to my house. The service comes into an ISP-supplied Router (ST585) which is in turn connected to an IPTV box. I need to replace the router, as it's port forwarding seems to be broken, so I was thinking of getting a box with an IGMP proxy. I once mistakenly got a non-IGMP box, with the result that the internet worked, but the IPTV didn't. The trouble is, I have no idea how to set up the IPTV part of the installation. I do have a copy of the ST585 configuration, but it doesn't look anything like the Cisco stuff that I learned about at CCNA. What are the steps necessary to reproduce the IGMP setup? I was thinking of WireSharking the communications on the network, but I suppose I'd need a hub for that? As a bonus, since the packets are coming in with the TV signal, is it possible to mess with the IGMP setup so I can watch TV anywhere in the house?

  Read the article

• A design for watching IPTV anywhere in the house?

  - by Carlos

  I'm currently getting TV and internet via IP to my house. The service comes into an ISP-supplied Router (ST585) which is in turn connected to an IPTV box. I need to replace the router, as it's port forwarding seems to be broken, so I was thinking of getting a box with an IGMP proxy. I once mistakenly got a non-IGMP box, with the result that the internet worked, but the IPTV didn't. The trouble is, I have no idea how to set up the IPTV part of the installation. I do have a copy of the ST585 configuration, but it doesn't look anything like the Cisco stuff that I learned about at CCNA. What are the steps necessary to reproduce the IGMP setup? I was thinking of WireSharking the communications on the network, but I suppose I'd need a hub for that? As a bonus, since the packets are coming in with the TV signal, is it possible to mess with the IGMP setup so I can watch TV anywhere in the house?

  Read the article

• Remote desktop to my KVM virtual machine

  - by user6

  I've got a dedicated server running Debian 6. I've set up a windows 7 virtual machine using KVM. Now I'm trying to get Remote desktop working. I'm guessing i have to do some port forwarding. The virtual machine is in a NAT. Remote desktop is already set up on it (another virtual machine can connect). I've tried using the iptables and countless of virsh commands of which I'm not even sure what they did. Anyone knows how to get this working?

  Read the article

• HP Media Smart remote access

  - by Coov

  I just purchased this box for home backups for my pc's and mac's. Everything works great accept for the remote access part. I can RD into the machine locally but I can't get to it from outside of my network. I've enabled port forwarding on my router but it doesn't seem to matter. I checked with Qwest and they don't block these ports so I'm at a loss. I do have Vonage in front of my router but I've taken it out and it didn't make a difference. I suspect I've made an error with my router setup. I'm a programmer and I'm playing in the world of the unknown here. I'm lost. Any suggestions?

  Read the article

• DNS: domain2 points to domain1

  - by Yar

  I have one domain ("domain1") that is set up with hosting and mail (hosted by Gmail Apps). This domain works perfectly. I want a second domain ("domain2") to forward to domain1, but I don't want to use "DNS Forwarding." I would like to have it act EXACTLY like domain1, so that domain2/whatever points to the same resource as domain1/whatever WITHOUT AN HTTP REDIRECT NOR BROWSER TRICKS LIKE FRAMES. I would also love to be able to send mail to "blah@domain2" and have it go to "blah@domain1". Can this be set up, and how? I am using GoDaddy as registrar and DNS host for both domains. GoDaddy is also the web host for domain1, and mail hosting is with Google Apps.

  Read the article

• Ubuntu based VPN server behind NAT router?

  - by maartenn88

  I have a small intranet- and file-server inside our company, which can only be reached from inside our own network. I'd like to be able to reach the intranet and files on the server from outside the network, however I don't really like the idea of completely opening security by forwarding the ports on our NAT-router, so I'd prefer to enable a VPN possibility for this. So I have a router, which is the DHCP server and has NAT function, and I have an Ubuntu Server with the files and intranet on it. How do I configure these two so that I can make a VPN connection with my network in order to reach the server? thanks in advance for any answer!

  Read the article

• Using Arch Linux computer as a server for Rack Apps

  - by wxl

  What would be the best way to go about using an Arch Linux computer as a Rack (as in Ruby Rack, not an actual rack server) server? Here's what I want to be able to do: Automatically deploy on a git push to the server. (I already have this worked out, on post-receive the server checks out the app to /home/git/app from /home/git/app.git.) Run a Rack server application to serve up this app, one that can be restarted on demand. Run a MongoDB server Be able to access the app by going to my-server.local/app or something similar. (It's really only going to be used on the local network, no port forwarding or outside use) Any ideas would be greatly appreciated. I apologize if this seems too "do it for me".

  Read the article

• so i installed sql server now how do i connect to it?

  - by letseatlunch

  SO i have a server running windows server 2008 r2 and i just installed Microsoft sql server 2008. I used the manager thing to create the database and the tables, etc and now i want to connect to it via my visual studio which is on a different machine. so how do i do that? do i need to "turn on" the sql server, do i need to do port forwarding? do i have to modify the iis or change those settings? is there a good article someone can me point me to? just to further help you help me, i understand how to connect to a datasource in visual studio my problem is more with the sql server and understanding how to properly set it up once installed. Sorry for the noob question, i got it all installed and i know how to use it once its all going i just don't know the in-between. thanks in advance dave

  Read the article

• Two routers on the same network

  - by qroberts

  My ISP has supplied me with a modem/router all in one and it isn't very good. It loses its settings and dies frequently. So I have another router in my apartment (Linksys wrt310n) that is connected to the modem via LAN-LAN port connections. I want to give my Linksys router the DHCP role and also have the ISP modem DMZ everything to the Linksys router. I want to be able to have all computers connected to both routers on the same network as well. I have been able to make it so that the Linksys has a DMZ to it from the ISP modem, but ISP modem LAN port - Linksys WAN port, so they were on different networks. Is there a way to have it so that both of them are on the same network but the Linksys router handles DHCP and port forwarding?

  Read the article

• Verizon Fivespot firewall

  - by Patrick

  I have a Verizon Fivespot Wi-Fi router and am having issues connecting to the computer that uses it to get on the internet. I am able to connect to the Fivespot admin pages remotely and I am able to connect to the internet from the computer behind the Fivespot. There are two sections pertinent to this issue, Port Filtering And, Port Forwarding I've tried each individually and both together but cannot access anything through the router except for the admin page. I am trying to connect through SSH to an Ubuntu 10.04 box over wifi. I have called Verizon Tech Support but they were unhelpful, the person essentially read what it says on each screen without any elaboration. Any help is greatly appreciated!

  Read the article

• Setting up and moving a distribution group to a public folder in Exchange 2003

  - by Sevdarkseed

  I'm looking for some advice with something that seems simple but I haven't done before. Currently we use a distribution group called Orders that has an email address that is that forwarded to four people in the company, the same goes for another one, Quotes. The problem is, of course, no one knows what was answered, and all the email gets worked in to the individual user's emails, so I'm thinking that a public folder, only accessible by one department would be the answer. I'm not sure what the best way to set this up would be or how to move/convert the current distribution list over to a public folder. This is a very critical email address in the company, so I'm trying to be sure that there is zero down time at all for it. What would be the best way to go about creating a public folder and converting/forwarding/moving/(whatever) over the current email address to that folder?

  Read the article

• How to setup a fast VPN server

  - by Saif Bechan

  I am trying to set up a VPN that has a fast download speed. The server I have is a linux server and from there I can download 2 megabytes a second. At home I can also download with 2 megabytes a second. All the downloads I do are from the same source, no different server. Now I have set up a VPN connection between my home and the server, and now I am only downloading 64 kilobytes a second! The connection I have created is a PPTP server on a debian machine. Now my question is if it is possible to optimize this connection. Should I maybe switch to OpenVPN, or change operating systems? Or are there some kind of settings to tweak to make the connection optimal. PS. The server I am running is on a XEN node. I have done the proper ip forwarding.

  Read the article

• How to play two or more videos side by side in a syncronized fashion in Linux?

  - by Grumbel

  I have two (or more) video files that I want to play side by side. I could do that simply by opening them in two seperate windows, but that would also seperate all the controls (play/pause/forward/...). I want to play them in a synchronized fashion so that pause/forwarding/... works on both videos simultaneously so that they always stay at the same timecode and they don't go out of sync. How would I accomplish that in Linux? This is needed for viewing only, so compositing them into a new video file first should be avoided if possible, but if there isn't an easy way to do that, I welcome answers doing it with composition as well.

  Read the article

• Web server suddenly stopped working

  - by wezten

  I have a web server, which was working fine. It also was an FTP server and a Windows Remote Desktop server, all working fine. Someone called our ISP to increase the internet speed, and suddenly nothing works - I can connect with Teamviewer, but HTTP, FTP & RD doesn't work. Disabled firewall. Ran Wireshark - the packets don't come through at all. Set the webserver to port 20111, in case the ISP is blocking port 80, and again, the packets didn't come through at all. (localhost:20111 works fine) Port forwarding is set up for ports 80, 21, 3389 & 20111 to 10.0.0.32 (which is the correct address - checked with ipconfig). Restarted router and computer. I would be very grateful for any help.

  Read the article

• How do I bridge a connection from Wi-Fi to TAP on Mac OS X? (for the emulator QEMU)

  - by penx

  I'm trying to setup a bridge between my Wi-Fi connection and an emulator (QEMU). I need a virtual machine to be on the same LAN as the host, with its own IP address. QEMU requires using a TAP (virtual network device) so I have installed tuntaposx, have it running, and can open up QEMU using a TAP: qemu-system-arm -kernel zImage.integrator -initrd arm_root.img -m 256 -net nic -net tap,ifname=tap1 -nographic -append "console=ttyAMA0" I have a script that configures the bridge once QEMU has opened up the TAP interface: sysctl -w net.link.ether.inet.proxyall=1 sysctl -w net.inet.ip.forwarding=1 sysctl -w net.inet.ip.fw.enable=1 ifconfig bridge0 create ifconfig bridge0 addm en1 ifconfig tap1 0.0.0.0 up ifconfig bridge0 addm tap1 ifconfig bridge0 up If I manually set an IP on the VM, I can ping from the VM to the host, but not from the host to the VM. Also, I can't access the rest of the network from the VM - including not being able to set an IP over DHCP. Any ideas?

  Read the article

• Airpot Express configuration

  - by Christina

  We are trying to set up remote access to a computer that houses a server fro a particular program we are running. The program says we need to configure the office router. In the firewall settings it says to open ports 5345-5351 (TCP only). Port Forwarding: You will also need to forward the same range of ports (5345-5351) to the computer running the Server. This typically requires that the computer running the Server be assigned a static IP on the local network. Having trouble figuring out which IP address we actually need to be using on the client side of this program in order to access the server computer. Can someone walk through this process?? We are working on Mac OSX 10.5. Thank you in advance!

  Read the article

• Set origin for forwarder based on virtual domain in Postfix

  - by Andrew Koester

  I currently have a machine set up to operate with two domains. The main name uses the standard Unix-user delivery, and the second domain is entirely virtual (using virtual_alias_domains and virtual_alias_maps), with the second domain only forwarding mail. However, when mail is forwarded, it still appears to be delivered by the host of the primary domain (presumably set by myorigin.) Is it possible to get it so when mail is forwarded to the virtual domain, it appears to be delivered by it as well? That domain is on another IP and I'd like to use it so the mail stays consistent. Thanks.

  Read the article

• Remote access to a KVM Ubuntu virtual server

  - by Lee

  I've just setup an ubuntu virtual server and everything seems to be working fine. I used KVM to get it working with a bridged network. I've given the virtual server a static ip address on my network. I don't seem to be able to connect to the virtual machine though from outside my network. If I'm on my own network it all works fine, I can ping the ip and connect to it. The virtual server can ping other machines and sites on the internet. I changed the port forwarding rules on my router to forward any connections on a specific port to the virtual server ip address thinking that was the problem, but it was still the same. Is there something I'm missing here which is blocking outside connections to the virtual machine? Thanks.

  Read the article

• Wifi and eth behavior

  - by r00ster

  I have a wireless router 150M Wireless Lite N Router Model No. TL-WR740N / TL-WR740ND. Normally, when I'm connected to the local network using eth0 I can ping other machines by issuing ping name. When I'm connected through wifi I have to issue ping name.domain.com. The machine is only visible in intranet. How to achieve the same behavior with wifi? The second problem is, that I can not connect to some external sites through wifi but through eth everything is ok. I guess that is related to some port forwarding, but I'm not sure. How can I resolve this issue? EDIT: I'm using Linux Mint.

  Read the article

< Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >