Search Results

Search found 13347 results on 534 pages for 'embedded device'.

Page 380/534 | < Previous Page | 376 377 378 379 380 381 382 383 384 385 386 387  | Next Page >

  • Sudden slow read & write speed on all IO

    - by user23392
    I have a custom built rig that has 2 storage drives. for OS: Western Digital 1.0TB HARD DR 64MB for other stuff: Corsair Performance 3 128GB (SSD) [ expected read speed: 400 mb/s ] The system was incredibly fast for a couple of months, then one day i was playing a game then it started to get buggy (some sounds and objects disappearing), i stopped the game and the system seemed to be unstable so i had to shut it down, next morning i couldn't start it up, it was saying something about corrupt device. I formatted both disks and installed a fresh copy of windows, all i can say that since that day the system was never like before, it takes 10 minutes to boot up (the icons and desktop slowly appear). but once it's done the slowness isn't as noticeable. Here's my benchmark on the HDD ( read speed - write speed ): And the SSD: Anyone knows what could be the issue?

    Read the article

  • Setting up WiFi extenders... is it possible to daisy-chain them?

    - by Bigbio2002
    At a location with limited cabling, I've had to set up WiFi signal extenders to cover the whole area. Here is a crude diagram... Internet - WiFi/Gateway - Extender 1 - Extender 2 | | PC (ethernet) WiFi device I was able to successfully daisy-chain three together, and I can access the internet from WiFi devices connected to the farthest extender. Is this a supported configuration? If not, what kind of issues can arise from it? The reason why I ask is that the PC keeps reporting IP address conflicts, and I'm wondering if that's caused because of the way this is configured. Additionally, I noticed that the extenders named their own SSID similar to the one they are connected to, but with a suffix. Would there be any issue in naming them all with the same SSID, to enable seamless roaming as you would with multiple standalone APs?

    Read the article

  • Wireless dropouts that only affect subset of devices

    - by jwaddell
    When watching videos streamed over WiFi from a NAS box (D-Link DNS-323) I am getting wireless dropouts. However they only appear to occur when I have left my laptop (Dell Inspiron 9300 running Windows XP SP3) running; the laptop is usually suspended if I'm not using it. The dropouts have occurred when streaming to a Netgear EVA8000 streaming device, and also to a PS3. I'm using a Netgear DG834G as the wireless modem/router. When a dropout occurs I go to the laptop and see that its wireless connection has also dropped out. The odd thing is that my wife's MacBook and my iPhone still maintain their connections. What could be causing this behaviour, and how do I go about fixing it?

    Read the article

  • Ubuntu on Oracle VirtualBox: Shared folders

    - by Rosarch
    I looked at this question, but it didn't help. I'm running Windows 7 as a host with Ubuntu 10.10 as a guest with VBox 4.0. I want to have a shared directory between the two. I have installed Guest Additions. I went to the VBox control panel in Windows, added a Shared Folder (sharename Shared_Folder), and chose "Auto Mount". A directory named "sf_Shared_Folder" appeared in /media on Ubuntu, but when I put files in that directory from an OS, I can't see them on the other one. I then tried to create a directory without automounting (sharename collectivefiles), and to run the following command: foo@foo-VirtualBox:~$ sudo mount -t vboxsf collectivefiles FileShare /sbin/mount.vboxsf: mounting failed with the error: No such device What is causing this error? I rebooted both the VM and VBox itself, but I'm still observing this.

    Read the article

  • GRUB2 Boot Configuration

    - by MA1
    Recently i installed GRUB2, everything is working fine. When my system is started my monitor is showing something like the following "Minimal BASH-Like line editing is supported. For the first word, TAB lists possible command completions. Anywhere else TAB lists the possible completions of a device/filename." Press "Esc" key to enter the menu. Boot windows... and when i press the Esc key it then shows the GRUB2 menu showing list of operating systems installed on my system How the remove "Minimal BASH-Like line editing ...." text. I only need this line Press "Esc" key to enter the menu. Boot windows... Note: Both my WindowsXP and Fedora12 are working fine and loading with no problem.

    Read the article

  • How to properly start gvfs without gnome?

    - by 9000
    I have a Debian testing box with Xfce (no Gnome, no Nautilus). It has all gvfs-related stuff installed, including all backends and fuse interface. But any attempts to gvfs-mount anything (like sftp://... or smb://...) fail with error opening file: Operation not supported, and gigolo shows only 'unix device (file)' in the list of supported protocols. My ~/.gvfs has rwx permissions, and I'm a member of fuse group; other fuse-related stuff works for me. What do I do? Where to look?

    Read the article

  • some keyboard keys not working properly

    - by surfmadpig
    I'm using windows 7. All of a sudden, a couple of hours ago, this happened: My keyboard number keys [above the letters] stopped working properly, both as numbers and as symbols. Only 5 and 6 are functional. Also, I've noticed that the End key isn't working either, and perhaps a couple more from that group. I'm pretty sure it has something to do with those evil Sticky Keys/Filter Keys/ whatever those ease of access things are, BUT I've turned off all the ease of access keyboard options and nothing has changed. Is it possible that something is still turned on while I unchecked it? Are the on/off checkboxes to control WHEN it happens or IF it happens? I also tried rebooting and uninstalling/reinstalling keyboard from device manager, to no avail. It's certainly a software issue and not a hardware issue, as I've tried another keyboard and the problem persists. And, predictably enough, it's annoying. Any ideas?

    Read the article

  • MP3 vs M4A (AAC): what is the audio codec for portable devices which gives maximum independence?

    - by akira
    A couple of years back MP3 was the most supported format for portable devices. Then Apple came along and wiped the floor of all the portable devices with the iPod as well as the iPhone. They clearly favour M4A (AAC). When to choose, right now, the 'best' audio codec to encode music to, which would you choose to achieve maximal independence of portable device vendors: MP3 or M4A? (I am well aware of Ogg (vorbis): no market (maybe this changes with HTML5 and more WebKit on portable devices), I am also aware of FLAC: I dont want to discuss long term storage.)

    Read the article

  • How to set up VLAN network

    - by Paddington
    I'm changing my network from having every device on flat network to using VLans. My problem is that we already have a lot of devices on this network(192.168.20.0/24). From theory, I read that each Vlan has to be a different subnet and then I need to configure virtual interfaces on my Cisco router to cater for inter vlan routing. 1) How can I segment this network with minimum down time on the devices already on the network? 2) Can I just create Vlans and leave all these Vlans in the same layer 3 network so that they can go out of the network (I am not too concerned about inter-Vlan routing) or I have to create subnets which means reconfiguring the existing devices (something I do not want).

    Read the article

  • Google Analytics unexplained spike

    - by Dianne
    My client's Google Analytics has had a spike everyday from May 6th (from 0 - 100.) This is in a city that he is not optimized for and does very little business in. The hits are coming in direct to the website. My client is concerned that it has something to do with competition using his site as a price shopping device. I can't view the ip to see where they are coming from and his site is not built in PHP so the work around doesn't work here. Any thoughts? Could it be a "referring site" situation and if so is there a way for me to find out what the referring site is?

    Read the article

  • Session cach and tmp folder error on cPanel Centos

    - by Danialzo
    One of my clients has come across multiple breakdowns in their websites with the following error PHP Code: Warning: session_start() [function.session-start]:open(/tmp/sess_1d6616afe1b8a0d91a8d9ec29254b453, O_RDWR) failed: No space left on device (28) in /home/***/public_html/system/library/session.php on line 11Warning: session_start() [function.session-start]: Cannot send session cookie - headers already sent by (output started at /home/***/public_html/index.php:104) in /home/***/public_html/system/library/session.php on line 11Warning: session_start() [function.session-start]: Cannot send session cache limiter - headers already sent (output started at /home/***/public_html/index.php:104) in /home/***/public_html/system/library/session.php on line 11Warning: Cannot modify header information - headers already sent by (output started at /home/***/public_html/index.php:104) in /home/***/public_html/index.php on line 177Warning: Cannot modify header information - headers already sent by (output started at /home/***/public_html/index.php:104) in /home/***/public_html/system/library/currency.php on line 45&#65279;Notice: Error: Can't create/write to file '/tmp/#sql_4c5_0.MYI' (Errcode: 28) Error No: 1 They are experiencing this problem while: Nothing has been recently changed on the server tmp and other folders are occupied with not more than 10% of their total space The error come and goes I would really appreciate it if anyone could guide me through. Thanks in advance

    Read the article

  • wifi connection turns off oll the time

    - by er-v
    Hello! I realy need help with one strange problem. I have a wifi network in my appartment with wireless N home router Trendnet tew-652BRP. Everething work fine for three of my laptops, but I have one PC with D-Link DWA-140 adapter. It looses connection 2-3 times in 5 minutes. There is following messages in my system log when it does so: The browser has forced an election on network \Device\NetBT_Tcpip_{9537A5C1-3B43-4C56-B94C-CE69A257C3AD} because a master browser was stopped. The TCP/IP NetBIOS Helper service was successfully sent a stop control. The reason specified was: 0x40030011 [Operating System: Network Connectivity (Planned)] Comment: None The TCP/IP NetBIOS Helper service entered the stopped state. in order of appearence. How can I stop it? I have the latest driver installed.

    Read the article

  • iptables, allow access from certain MAC addresses

    - by user788171
    Presently, I limit which clients can access my server by using IP addresses via iptables, only approved IP addresses can connect. However, the problem with this is if a client is on a laptop and goes to a different location, they can no longer connect because the IP has changed. For a variety of reasons, iptables authentication is the only option I have. Is there a way to restrict access by device instead of ip address. For instance, only allow certain MAC address to connect to port 5000. Is it possible to do this via iptables? Note, the computers are not on the same network, they could be connecting from anywhere in the world.

    Read the article

  • How to use a D-Link usb network adapter on debian

    - by Barranka
    I have a Debian (squeeze) desktop, and I need to use a D-Link 150 USB Wireless Network Adapter. So far I've done this: $ lsusb ... Bus 001 Device 006: ID 2001:3c18 D-Link Corp. ... After looking for a solution in google, I found that I needed to install the following package: firmware-ralink_0.28+squeeze1_all.deb I've installed it, but Debian doesn't want to find the adapter. When I run lsmod, I can't find what I'm supposed to find: rt2870sta Can you point me in the right direction?

    Read the article

  • Access a windows dynamic hard drive through a virtual machine on ubuntu?

    - by Enigma
    I have a Windows 7 OS and am thinking about transitioning to a dual boot set up with Ubuntu 12.04. From what I recall, it is not possible to natively access Dynamic Windows Partitions in a Linux OS. My thought is that it might be possible to have a virtual machine (running windows) installed within Ubuntu access the physical dynamic drive. The problem comes to whether VMWare can access the physical disk "high enough" to be able to mount it within the windows virtual machine as a native device or if it gets passed through from the native Linux OS. This is really the only thing holding me back from switching to a dual-boot set up as the dynamic disk is made up of 4 or 5 hard drives and I would very much like access to the data on both OS's. Alternatively, is there another solution for combining multiple physical hard drives into one virtual hard drive that would be readable on both OS's?

    Read the article

  • Slow performance with WAMP localhost access from other devices

    - by Adam
    I setup a localhost WAMP server and other device can access my localhost site on my win8 laptop with computer name instead of IP (bc I have use DCIP so that the wireless router can assign me IP otherwise it will not work). However, problem is that the website (WordPress), access speed is extremely slow on other devices other than my localhost computer, usually a 3s task take at least 10 seconds. (i.e. view my localhost site with computer name in a phone within the same wireless network.) Is that normal? What could be the reason causing it? Thank You

    Read the article

  • Are there any free Windows based BluRay players out there?

    - by joshcomley
    I have a BluRay drive in my PC, and I'm wondering what the cheapest way to actually get it to play a movie is (I didn't expect this to be trouble). I'm using Windows 7. I installed CyberLink PowerDVD 8 (I'm currently downloading 10 but it's taking a very, very long time) and I get the below "error" when trying to watch a BluRay movie: CyberLink PowerDVD is not able to play the protected content on your digital output device. Please switch to an analog output (VGA, D-Sub) and then try again. I can't get VLC to play it and my research yields no plugins for VLC to enable it either - unless I'm vastly missing something. Help!

    Read the article

  • Any way to release focus on a KVM guest in virt-manager without having to click Ctrl_L + Alt_L?

    - by slm
    Is there a way to move my mouse in and out of a KVM guest in virt-manager without having to click to gain focus of the window and release focus by pressing Ctrl_L + Alt_L? EDIT #1 The guest VM is Win2008R2. I've tried this on a CentOS 5, 6, and Fedora 14 box running various versions of virt-manager and KVM and they all exhibit this behavior. EDIT #2 I just tried the solution recommended by @tpow and that appears to be the issue. Manually adding a tablet input device resolves the problem and I can now move the mouse in and out of the KVM guest without having to gain focus first.

    Read the article

  • Detecting hardware and installing drivers in Windows XP

    - by JL.
    I have on my desk a computer that I am reinstalling. I have just completed the Windows XP install , which is professional service pack 3. I have also installed an AV package. Now it is time to install the audio and display drivers. Windows Update does not detect the Display card, and neither the audio device. I really have no idea what devices are present in this system, and I am thinking of opening the case, and reading some IDs from the cards themselves. Before I do this, is there not some kind of tool that can automatically detect hardware and install drivers automatically. If not then at least tell me what devices are present, with some real descriptions, so I can search for drivers.

    Read the article

  • df-h command in ubuntu

    - by Esha Sharma
    I am a new user of Ubuntu. When I type df -h in terminal , it gives me list of all storage devices and space usage. In my system I get this. Filesystem Size Used Avail Use% Mounted on /cow 934M 173M 761M 19% / udev 925M 4.0K 925M 1% /dev tmpfs 374M 856K 373M 1% /run /dev/sdb1 7.5G 2.8G 4.8G 37% /cdrom /dev/loop0 1.5G 1.5G 0 100% /rofs tmpfs 934M 16K 934M 1% /tmp none 5.0M 0 5.0M 0% /run/lock none 934M 76K 934M 1% /run/shm /dev/sda 299G 74M 299G 1% /media/q I understand that /dev/sda is my hard drive which is 320 gb(in gib it is 299 and hopefully that is what is being displayed) and /dev/sdb1 is pendrive of 8gb from which I am running the live cd. My question is what are the other folders and what is the physical location of these folders if complete memory is taken by the device dev/sda?

    Read the article

  • CoovaAP router does not get DHCP settings from modem

    - by Dan Sosedoff
    Im having some serious trouble making CoovaAP-powered router get network settings from modem. Wireless router works in captive portal mode (so it handles user login on the same device). But DNS settings and connection ip (for router) are not set as they supposed to via DHCP on modem. It makes installation in other location really complicated, because you have to go and set everything manually. For now i use google`s dns servers. What`s the way to make router self-configurable via modem's dhcp ?

    Read the article

  • Need Assistance on ASUS K55V USB ports not working

    - by Pascal Schilling
    I have a K55V ASUS laptop, W7 Home (64bit). Whenever I try to use a mouse (or any other USB device), it doesn't work because of a driver problem. The automatic update tries to update the driver and requires me to reboot directly after. It doesn't work. Windows update then wants to re-attempt the update and then I have to reboot (etc). Now, after 10 tries it still doesn't work. Can some one help me out on this? No USB ports work at the moment, it has 2 USB 3.0 ports and 1 USB 2.0 port.

    Read the article

  • Software RAID 1 broken, how do I fix this?

    - by Edward
    I'm running CentOS 6 x86_64. There is a software RAID 1 being used on the two internal 80GB drives. I got the following e-mail sent to me: A DegradedArray event had been detected on md device /dev/md1. Faithfully yours, etc. P.S. The /proc/mdstat file currently contains the following: Personalities : [raid1] md0 : active raid1 sda1[0] 511988 blocks super 1.0 [2/1] [U_] md1 : active raid1 sda2[0] 8190968 blocks super 1.1 [2/1] [U_] bitmap: 1/1 pages [4KB], 65536KB chunk md4 : active raid1 sdc1[0] sdb1[1] 1953512400 blocks super 1.2 [2/2] [UU] md3 : active raid1 sdd5[1] sda5[0] 61224892 blocks super 1.1 [2/2] [UU] bitmap: 1/1 pages [4KB], 65536KB chunk md2 : active raid1 sdd3[1] sda3[0] 8190968 blocks super 1.1 [2/2] [UU] unused devices: <none> The system appears to have booted fine and is working. The two drives' content did not change at all. I only removed and reinstalled them while I was booted on the CentOS Live DVD. How do I get the array working again?

    Read the article

  • My Network adapter "D-Link DWA-547" is causing windows 7 to freeze up.

    - by Anders
    Any audio playing, and sometimes the program i am using is constantly stuttering and freezing up. I have narrowed the offending hardware down to my: D-Link DWA-547 RangeBooster N650 Desktop Adapter If i disable it in the device manager everything runs fine and smooth. The card works, and gives me super fast internet. But the rest of the system hangs. I have tried installing the card with the drivers from the cd that came with it, i also tried the lates beta drivers from the d-link webpage, but the problem persists. What do i do? I am running windows 7 x64 on a asus p5b motherboard with 2 intel processors.

    Read the article

  • Emulate a USB port as a USB flash drive?

    - by Wilco
    Does anyone know of any software that can emulate a USB flash drive through an available USB port in OS X? Perhaps some way to map a directory to a USB port that could then be connected to another device that supports reading USB storage devices? I'd love to connect my laptop to my car's USB port and access files as if it were a USB drive. I know about the target disk mode with firewire (not sure if this is also supported over USB), but I was hoping for something that doesn't require booting outside of the OS (I want to retain use of the machine). Any ideas?

    Read the article

< Previous Page | 376 377 378 379 380 381 382 383 384 385 386 387  | Next Page >