Search Results

Search found 9551 results on 383 pages for 'john shell'.

Page 381/383 | < Previous Page | 377 378 379 380 381 382 383  | Next Page >

• Where is the virtual function call overhead?

  - by Semen Semenych

  Hello everybody, I'm trying to benchmark the difference between a function pointer call and a virtual function call. To do this, I have written two pieces of code, that do the same mathematical computation over an array. One variant uses an array of pointers to functions and calls those in a loop. The other variant uses an array of pointers to a base class and calls its virtual function, which is overloaded in the derived classes to do absolutely the same thing as the functions in the first variant. Then I print the time elapsed and use a simple shell script to run the benchmark many times and compute the average run time. Here is the code: #include <iostream> #include <cstdlib> #include <ctime> #include <cmath> using namespace std; long long timespecDiff(struct timespec *timeA_p, struct timespec *timeB_p) { return ((timeA_p->tv_sec * 1000000000) + timeA_p->tv_nsec) - ((timeB_p->tv_sec * 1000000000) + timeB_p->tv_nsec); } void function_not( double *d ) { *d = sin(*d); } void function_and( double *d ) { *d = cos(*d); } void function_or( double *d ) { *d = tan(*d); } void function_xor( double *d ) { *d = sqrt(*d); } void ( * const function_table[4] )( double* ) = { &function_not, &function_and, &function_or, &function_xor }; int main(void) { srand(time(0)); void ( * index_array[100000] )( double * ); double array[100000]; for ( long int i = 0; i < 100000; ++i ) { index_array[i] = function_table[ rand() % 4 ]; array[i] = ( double )( rand() / 1000 ); } struct timespec start, end; clock_gettime(CLOCK_PROCESS_CPUTIME_ID, &start); for ( long int i = 0; i < 100000; ++i ) { index_array[i]( &array[i] ); } clock_gettime(CLOCK_PROCESS_CPUTIME_ID, &end); unsigned long long time_elapsed = timespecDiff(&end, &start); cout << time_elapsed / 1000000000.0 << endl; } and here is the virtual function variant: #include <iostream> #include <cstdlib> #include <ctime> #include <cmath> using namespace std; long long timespecDiff(struct timespec *timeA_p, struct timespec *timeB_p) { return ((timeA_p->tv_sec * 1000000000) + timeA_p->tv_nsec) - ((timeB_p->tv_sec * 1000000000) + timeB_p->tv_nsec); } class A { public: virtual void calculate( double *i ) = 0; }; class A1 : public A { public: void calculate( double *i ) { *i = sin(*i); } }; class A2 : public A { public: void calculate( double *i ) { *i = cos(*i); } }; class A3 : public A { public: void calculate( double *i ) { *i = tan(*i); } }; class A4 : public A { public: void calculate( double *i ) { *i = sqrt(*i); } }; int main(void) { srand(time(0)); A *base[100000]; double array[100000]; for ( long int i = 0; i < 100000; ++i ) { array[i] = ( double )( rand() / 1000 ); switch ( rand() % 4 ) { case 0: base[i] = new A1(); break; case 1: base[i] = new A2(); break; case 2: base[i] = new A3(); break; case 3: base[i] = new A4(); break; } } struct timespec start, end; clock_gettime(CLOCK_PROCESS_CPUTIME_ID, &start); for ( int i = 0; i < 100000; ++i ) { base[i]->calculate( &array[i] ); } clock_gettime(CLOCK_PROCESS_CPUTIME_ID, &end); unsigned long long time_elapsed = timespecDiff(&end, &start); cout << time_elapsed / 1000000000.0 << endl; } My system is LInux, Fedora 13, gcc 4.4.2. The code is compiled it with g++ -O3. The first one is test1, the second is test2. Now I see this in console: [Ignat@localhost circuit_testing]$ ./test2 && ./test2 0.0153142 0.0153166 Well, more or less, I think. And then, this: [Ignat@localhost circuit_testing]$ ./test2 && ./test2 0.01531 0.0152476 Where are the 25% which should be visible? How can the first executable be even slower than the second one? I'm asking this because I'm doing a project which involves calling a lot of small functions in a row like this in order to compute the values of an array, and the code I've inherited does a very complex manipulation to avoid the virtual function call overhead. Now where is this famous call overhead?

  Read the article

• Wikipedia API: list=alllinks confusion

  - by Chris Salij

  I'm doing a research project for the summer and I've got to use get some data from Wikipedia, store it and then do some analysis on it. I'm using the Wikipedia API to gather the data and I've got that down pretty well. What my questions is in regards to the links-alllinks option in the API doc here After reading the description, both there and in the API itself (it's down and bit and I can't link directly to the section), I think I understand what it's supposed to return. However when I ran a query it gave me back something I didn't expect. Here's the query I ran: http://en.wikipedia.org/w/api.php?action=query&prop=revisions&titles=google&rvprop=ids|timestamp|user|comment|content&rvlimit=1&list=alllinks&alunique&allimit=40&format=xml Which in essence says: Get the last revision of the Google page, include the id, timestamp, user, comment and content of each revision, and return it in XML format. The allinks (I thought) should give me back a list of wikipedia pages which point to the google page (In this case the first 40 unique ones). I'm not sure what the policy is on swears, but this is the result I got back exactly: <?xml version="1.0"?> <api> <query><normalized> <n from="google" to="Google" /> </normalized> <pages> <page pageid="1092923" ns="0" title="Google"> <revisions> <rev revid="366826294" parentid="366673948" user="Citation bot" timestamp="2010-06-08T17:18:31Z" comment="Citations: [161]Tweaked: url. [[User:Mono|Mono]]" xml:space="preserve"> <!-- The page content, I've replaced this cos its not of interest --> </rev> </revisions> </page> </pages> <alllinks> <l ns="0" title="!" /> <l ns="0" title="!!" /> <l ns="0" title="!!!" /> <l ns="0" title="!!!!" /> <l ns="0" title="!!!!!!!!!!!!!!!!!!!!!" /> <l ns="0" title="!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!" /> <l ns="0" title="!!!!!!!!!!!!!!!!!!!!*was up all u hater just stopingby to show u some love*!!!!!!!!!!!!!!!!!!!!!!!!!!!" /> <l ns="0" title="!!!!!!!!!!!!&amp;&amp;&amp;&amp;&amp;&amp;&amp;&amp;&amp;&amp;&amp;********(( )))))F/W///CHRYSLER/FUCKING/FUCKING/FUCKING/I HATE THE QUEEN!!!/I AM HORRID HENRY/Chrysler Cirrus/php" /> <l ns="0" title="!!!!!Hephaestos IS A FUCKING WHINY GUY!!!!!!" /> <l ns="0" title="!!!!Do you really want to see this article on your default search?" /> <l ns="0" title="!!!!Legal!!!!" /> <l ns="0" title="!!!!YOU ARE A COCKSUCKING WHINY GREASER!!!!" /> <l ns="0" title="!!!BESQUERKAN!!!" /> <l ns="0" title="!!!Fuck You!!!" /> <l ns="0" title="!!!Fuck You!!! And Then Some" /> <l ns="0" title="!!!Fuck You!!! And Then some" /> <l ns="0" title="!!!Fuck You!!! And then Some" /> <l ns="0" title="!!!Fuck You!!! and Then Some" /> <l ns="0" title="!!!Three !!! Amigos!!!" /> <l ns="0" title="!!! (album)" /> <l ns="0" title="!!! (band)" /> <l ns="0" title="!!1" /> <l ns="0" title="!!BOSS!!" /> <l ns="0" title="!!Destroy-Oh-Boy!!" /> <l ns="0" title="!!Fuck you!!" /> <l ns="0" title="!!M" /> <l ns="0" title="!!Que Corra La Voz!!" /> <l ns="0" title="!! (chess)" /> <l ns="0" title="!! (disambiguation)" /> <l ns="0" title="!! 6- -.4rtist.com" /> <l ns="0" title="!!m" /> <l ns="0" title="!!suck my balls!!" /> <l ns="0" title="!!~~YOU WIN~~!!" /> <l ns="0" title="!&#039;O-!khung language" /> <l ns="0" title="!(1)Full Name:(2)Age:(3)Sex:(4)Occupation:(5)Phone Number: (6)Delivery Address:(7)Country of Residence:. Dr.John Aboh" /> <l ns="0" title="!-" /> <l ns="0" title="!-My Degrassi Top 10 Episodes" /> <l ns="0" title="!10 Show" /> <l ns="0" title="!2005" /> <l ns="0" title="!2006" /> </alllinks> </query> <query-continue> <revisions rvstartid="366673948" /> <alllinks alfrom="!2009" /> </query-continue> </api> As you can see if you look at the <alllinks> part, its just a load of random gobbledy-gook. No nearly what I thought I'd get. I've done a fair bit of searching but I can't seem to find a direct answer to my question. What should the list=alllinks option return? Why am I getting this crap in there? Thanks for your help

  Read the article

• HTML client-side portable file generation - no external resources or server calls

  - by awashburn

  I have the following situation: I have set up a series of Cron jobs on an internal company server to run various PHP scripts designed to check data integrity. Each PHP script queries a company database, formats the returned query data into an HTML file containing one or more <tables>, and then mails the HTML file to several client emails as an attachment. From my experience, most of the PHP scripts generate HTML files with only a few tables, however there are a few PHP scripts the create HTML files with around 30 tables. HTML files have been chosen as the distribution format of these scans because HTML makes it easy to view many tables at once in a browser window. I would like to add the functionality for the clients to download a table in the HTML file as a CSV file. I anticipate clients using this feature when they suspect a data integrity issue based on the table data. It would be ideal for them to be able to take the table in question, export the data out to a CSV file, and then study it further. Because need for exporting the data to CSV format is at the discretion of the client, unpredictable as to what table will be under scrutiny, and intermittently used I do not want to create CSV files for every table. Normally creating a CSV file wouldn't be too difficult, using JavaScript/jQuery to preform DOM traversal and generate the CSV file data into a string utilizing a server call or flash library to facilitate the download process; but I have one limiting constraint: The HTML file needs to be "portable." I would like the clients to be able to take their HTML file and preform analysis of the data outside the company intranet. Also it is likely these HTML files will be archived, so making the export functionality "self contained" in the HTML files is a highly desirable feature for the two previous reasons. The "portable" constraint of CSV file generation from a HTML file means: I cannot make a server call. This means ALL the file generation must be done client-side. I want the single HTML file attached to the email to contain all the resources to generate the CSV file. This means I cannot use jQuery or flash libraries to generate the file. I understand, for obvious security reasons, that writing out files to disk using JavaScript isn't supported by any browser. I don't want to create a file without the user knowledge; I would like to generate the file using JavaScript in memory and then prompt the user the "download" the file from memory. I have looked into generating the CSV file as a URI however, according to my research and testing, this approach has a few problems: URIs for files are not supported by IE (See Here) URIs in FireFox saves the file with a random file name and as a .part file As much as it pains me, I can accept the fact the IE<=v9 won't create a URI for files. I would like to create a semi-cross-browser solution in which Chrome, Firefox, and Safari create a URI to download the CSV file after JavaScript DOM traversal compiles the data. My Example Table: <table> <thead class="resulttitle"> <tr> <th style="text-align:center;" colspan="3"> NameOfTheTable</th> </tr> </thead> <tbody> <tr class="resultheader"> <td>VEN_PK</td> <td>VEN_CompanyName</td> <td>VEN_Order</td> </tr> <tr> <td class='resultfield'>1</td> <td class='resultfield'>Brander Ranch</td> <td class='resultfield'>Beef</td> </tr> <tr> <td class='resultfield'>2</td> <td class='resultfield'>Super Tree Produce</td> <td class='resultfield'>Apples</td> </tr> <tr> <td class='resultfield'>3</td> <td class='resultfield'>John's Distilery</td> <td class='resultfield'>Beer</td> </tr> </tbody> <tfoot> <tr> <td colspan="3" style="text-align:right;"> <button onclick="doSomething(this);">Export to CSV File</button></td> </tr> </tfoot> </table> My Example JavaScript: <script type="text/javascript"> function doSomething(inButton) { /* locate elements */ var table = inButton.parentNode.parentNode.parentNode.parentNode; var name = table.rows[0].cells[0].textContent; var tbody = table.tBodies[0]; /* create CSV String through DOM traversal */ var rows = tbody.rows; var csvStr = ""; for (var i=0; i < rows.length; i++) { for (var j=0; j < rows[i].cells.length; j++) { csvStr += rows[i].cells[j].textContent +","; } csvStr += "\n"; } /* temporary proof DOM traversal was successful */ alert("Table Name:\t" + name + "\nCSV String:\n" + csvStr); /* Create URI Here! * (code I am missing) */ /* Approach 1 : Auto-download * downloads CSV data but: * In FireFox downloads as randomCharacers.part instead of name.csv * In Chrome downloads without prompting the user * In Safari opens the files in browser (textfile) */ //var hrefData = "data:text/csv;charset=US-ASCII," + encodeURIComponent(csvStr); //document.location.href = hrefData; /* Approach 2 : Right-Click Save As... */ var hrefData = "data:text/csv;charset=US-ASCII," + encodeURIComponent(csvStr); var fileLink = document.createElement("a"); fileLink.href = hrefData; fileLink.innerHTML = "download"; parentTD = inButton.parentNode; parentTD.appendChild(fileLink); parentTD.removeChild(inButton); } </script> I am looking for an example solution in which the above example table can be downloaded as a CSV file: using a URI the user is prompted to save the file the default filename is the name of the table. code works as described in modern versions of FireFox, Safari, & Chrome I have added a <script> tag with the DOM traversal function doSomething(). The real help I need is with formatting the URI to what I want within the doSomething() function.

  Read the article

• What add-in/workbench framework is the best .NET alternative to Eclipse RCP?

  - by Winston Fassett

  I'm looking for a plugin-based application framework that is comparable to the Eclipse Plugin Framework, which to my simple mind consists of: a core plugin management framework (Equinox / OSGI), which provides the ability to declare extension endpoints and then discover and load plugins that service those endpoints. (this is different than Dependency Injection, but admittedly the difference is subtle - configuration is highly de-centralized, there are versioning concerns, it might involve an online plugin repository, and most importantly to me, it should be easy for the user to add plugins without needing to know anything about the underlying architecture / config files) many layers of plugins that provide a basic workbench shell with concurrency support, commands, preference sheets, menus, toolbars, key bindings, etc. That is just scratching the surface of the RCP, which itself is meant to serve as the foundation of your application, which you build by writing / assembling even more plugins. Here's what I've gleaned from the internet in the past couple of days... As far as I can tell, there is nothing in the .NET world that remotely approaches the robustness and maturity of the Eclipse RCP for Java but there are several contenders that do either #1 or #2 pretty well. (I should also mention that I have not made a final decision on WinForms vs WPF, so I'm also trying to understand the level of UI coupling in any candidate framework. I'm also wondering about platform coupling and source code licensing) I must say that the open-source stuff is generally less-documented but easier to understand, while the MS stuff typically has more documentation but is less accessible, so that with many of the MS technologies, I'm left wondering what they actually do, in a practical sense. These are the libraries I have found: SharpDevelop The first thing I looked at was SharpDevelop, which does both #1 and also #2 in a basic way (no insult to SharpDevelop, which is admirable - I just mean more basic than Eclipse RCP). However, SharpDevelop is an application more than a framework, and there are basic assumptions and limitations there (i.e. being somewhat coupled to WinForms). Still, there are some articles on CodeProject explaining how to use it as the foundation for an application. System.Addins It appears that System.Addins is meant to provide a robust add-in loading framework, with some sophisticated options for loading assemblies with varying levels of trusts and even running the out of process. It appears to be primarily code-based, and pretty code-heavy, with lots of assemblies that serve to insulate against versioning issues., using Guidance Automation to generate a good deal of code. So far I haven't found many System.AddIns articles that illustrate how it could be used to build something like an Eclipse RCP, and many people seem to be wringing their hands about its complexity. Mono.Addins It appears that Mono.Addins was influenced by System.Addins, SharpDevelop, and MonoDevelop. It seems to provide the basics from System.Addins, with less sophisticated options for plugin loading, but more simplicity, with attribute-based registration, XML manifests, and the infrastructure for online plugin repositories. It has a pretty good FAQ and documentation, as well as a fairly robust set of examples that really help paint a picture of how to develop an architecture like that of SharpDevelop or Eclipse. The examples use GTK for UI, but the framework itself is not coupled to GTK. So it appears to do #1 (add-in loading) pretty well and points the way to #2 (workbench framework). It appears that Mono.Addins was derived from MonoDevelop, but I haven't actually looked at whether MonoDevelop provides a good core workbench framework. Managed Extensibility Framework This is what everyone's talking about at the moment, and it's slowly getting clearer what it does, but I'm still pretty fuzzy, even after reading several posts on SO. The official word is that it "can live side-by-side" with System.Addins. However, it doesn't reference it and it appears to reproduce some of its functionality. It seems to me, then, that it is a simpler, more accessible alternative to System.Addins. It appears to be more like Mono.Addins in that it provides attribute-based wiring. It provides "catalogs" that can be attribute-based or directory-based. It does not seem to provide any XML or manifest-based wiring. So far I haven't found much documentation and the examples seem to be kind of "magical" and more reminiscent of attribute-based DI, despite the clarifications that MEF is not a DI container. Its license just got opened up, but it does reference WindowsBase -- not sure if that means it's coupled to Windows. Acropolis I'm not sure what this is. Is it MEF, or something that is still coming? Composite Application Blocks There are WPF and Winforms Composite Application blocks that seem to provide much more of a workbench framework. I have very little experience with these but they appear to rely on Guidance Automation quite a bit are obviously coupled with the UI layers. There are a few examples of combining MEF with these application blocks. I've done the best I could to answer my own question here, but I'm really only scratching the surface, and I don't have experience with any of these frameworks. Hopefully some of you can add more detail about the frameworks you have experience with. It would be great if we could end up with some sort of comparison matrix.

  Read the article

• Error: No mapping exists from object type....

  - by jakesankey

  Here is the code for my simple parsing application. I am getting an error that states 'No mapping exists from type System.Text.RegularExpressions.Match to a known managed provider native type'. This started to occur when I switched from using Split('_') to RegEx.Match for defining RNumberE, RNumberD, etc. Any guidance is appreciated. using System; using System.Data; using System.Data.SQLite; using System.IO; using System.Text.RegularExpressions; using System.Threading; using System.Collections.Generic; using System.Linq; using System.Data.SqlClient; namespace JohnDeereCMMDataParser { internal class Program { public static List<string> GetImportedFileList() { List<string> ImportedFiles = new List<string>(); using (SqlConnection connect = new SqlConnection(@"Server=FRXSQLDEV;Database=RX_CMMData;Integrated Security=YES")) { connect.Open(); using (SqlCommand fmd = connect.CreateCommand()) { fmd.CommandText = @"SELECT FileName FROM CMMData;"; fmd.CommandType = CommandType.Text; SqlDataReader r = fmd.ExecuteReader(); while (r.Read()) { ImportedFiles.Add(Convert.ToString(r["FileName"])); } } } return ImportedFiles; } private static void Main(string[] args) { Console.Title = "John Deere CMM Data Parser"; Console.WriteLine("Preparing CMM Data Parser... done"); Console.WriteLine("Scanning for new CMM data..."); Console.ForegroundColor = ConsoleColor.Gray; using (SqlConnection con = new SqlConnection(@"Server=FRXSQLDEV;Database=RX_CMMData;Integrated Security=YES")) { con.Open(); using (SqlCommand insertCommand = con.CreateCommand()) { Console.WriteLine("Connecting to SQL server..."); SqlCommand cmdd = con.CreateCommand(); string[] files = Directory.GetFiles(@"C:\Documents and Settings\js91162\Desktop\CMM WENZEL\", "*_*_*.txt", SearchOption.AllDirectories); List<string> ImportedFiles = GetImportedFileList(); insertCommand.Parameters.Add(new SqlParameter("@FeatType", DbType.String)); insertCommand.Parameters.Add(new SqlParameter("@FeatName", DbType.String)); insertCommand.Parameters.Add(new SqlParameter("@Axis", DbType.String)); insertCommand.Parameters.Add(new SqlParameter("@Actual", DbType.Decimal)); insertCommand.Parameters.Add(new SqlParameter("@Nominal", DbType.Decimal)); insertCommand.Parameters.Add(new SqlParameter("@Dev", DbType.Decimal)); insertCommand.Parameters.Add(new SqlParameter("@TolMin", DbType.Decimal)); insertCommand.Parameters.Add(new SqlParameter("@TolPlus", DbType.Decimal)); insertCommand.Parameters.Add(new SqlParameter("@OutOfTol", DbType.Decimal)); foreach (string file in files.Except(ImportedFiles)) { var FileNameExt1 = Path.GetFileName(file); cmdd.Parameters.Clear(); cmdd.Parameters.Add(new SqlParameter("@FileExt", FileNameExt1)); cmdd.CommandText = @" IF (EXISTS (SELECT * FROM INFORMATION_SCHEMA.TABLES WHERE TABLE_SCHEMA = 'RX_CMMData' AND TABLE_NAME = 'CMMData')) BEGIN SELECT COUNT(*) FROM CMMData WHERE FileName = @FileExt; END"; int count = Convert.ToInt32(cmdd.ExecuteScalar()); con.Close(); con.Open(); if (count == 0) { Console.WriteLine("Preparing to parse CMM data for SQL import..."); if (file.Count(c => c == '_') > 5) continue; insertCommand.CommandText = @" INSERT INTO CMMData (FeatType, FeatName, Axis, Actual, Nominal, Dev, TolMin, TolPlus, OutOfTol, PartNumber, CMMNumber, Date, FileName) VALUES (@FeatType, @FeatName, @Axis, @Actual, @Nominal, @Dev, @TolMin, @TolPlus, @OutOfTol, @PartNumber, @CMMNumber, @Date, @FileName);"; string FileNameExt = Path.GetFullPath(file); string RNumber = Path.GetFileNameWithoutExtension(file); int index2 = RNumber.IndexOf("~"); Match RNumberE = Regex.Match(RNumber, @"^(R|L)\d{6}(COMP|CRIT|TEST|SU[1-9])(?=_)", RegexOptions.IgnoreCase); Match RNumberD = Regex.Match(RNumber, @"(?<=_)\d{3}[A-Z]\d{4}|\d{3}[A-Z]\d\w\w\d(?=_)", RegexOptions.IgnoreCase); Match RNumberDate = Regex.Match(RNumber, @"(?<=_)\d{8}(?=_)", RegexOptions.IgnoreCase); if (RNumberD.Value == @"") continue; if (RNumberE.Value == @"") continue; if (RNumberDate.Value == @"") continue; if (index2 != -1) continue; /* string RNumberE = RNumber.Split('_')[0]; string RNumberD = RNumber.Split('_')[1]; string RNumberDate = RNumber.Split('_')[2]; */ DateTime dateTime = DateTime.ParseExact(RNumberDate.Value, "yyyyMMdd", Thread.CurrentThread.CurrentCulture); string cmmDate = dateTime.ToString("dd-MMM-yyyy"); string[] lines = File.ReadAllLines(file); bool parse = false; foreach (string tmpLine in lines) { string line = tmpLine.Trim(); if (!parse && line.StartsWith("Feat. Type,")) { parse = true; continue; } if (!parse || string.IsNullOrEmpty(line)) { continue; } Console.WriteLine(tmpLine); foreach (SqlParameter parameter in insertCommand.Parameters) { parameter.Value = null; } string[] values = line.Split(new[] { ',' }); for (int i = 0; i < values.Length - 1; i++) { SqlParameter param = insertCommand.Parameters[i]; if (param.DbType == DbType.Decimal) { decimal value; param.Value = decimal.TryParse(values[i], out value) ? value : 0; } else { param.Value = values[i]; } } insertCommand.Parameters.Add(new SqlParameter("@PartNumber", RNumberE)); insertCommand.Parameters.Add(new SqlParameter("@CMMNumber", RNumberD)); insertCommand.Parameters.Add(new SqlParameter("@Date", cmmDate)); insertCommand.Parameters.Add(new SqlParameter("@FileName", FileNameExt)); insertCommand.ExecuteNonQuery(); insertCommand.Parameters.RemoveAt("@PartNumber"); insertCommand.Parameters.RemoveAt("@CMMNumber"); insertCommand.Parameters.RemoveAt("@Date"); insertCommand.Parameters.RemoveAt("@FileName"); } } } Console.WriteLine("CMM data successfully imported to SQL database..."); } con.Close(); } } } }

  Read the article

• Where am I going wrong in my Xml Schema?

  - by chobo2

  Hi I am trying to make a XML Schema but everytime I use it and try to validate my data I get an error. I get this error: Validation of the XML Document failed! Error message(s): Could not find schema information for the element 'Email'. Line: 1 Column:1213 http://www.xmlforasp.net/SchemaValidator.aspx My Xml file I am trying to validate. <?xml version="1.0" encoding="utf-8" ?> <School> <SchoolPrefix>BCIT</SchoolPrefix> <TeacherAccounts> <Account> <StudentNumber>A00140000</StudentNumber> <Password>123456</Password> <Email>[email protected]</Email> </Account> <Account> <StudentNumber>A00000041</StudentNumber> <Password>1234567</Password> <Email>[email protected]</Email> </Account> <Account> <StudentNumber>A0400100</StudentNumber> <Password>1234567</Password> <Email>[email protected]</Email> </Account> </TeacherAccounts> <FullTimeAccounts> <Account> <StudentNumber>A00000000</StudentNumber> <Password>1234567</Password> <Email>[email protected]</Email> </Account> <Account> <StudentNumber>A00141000</StudentNumber> <Password>1234567</Password> <Email>[email protected]</Email> </Account> </FullTimeAccounts> <PartTimeAccounts> <Account> <StudentNumber>A81020409</StudentNumber> <Password>1234567</Password> <Email>[email protected]</Email> </Account> <Account> <StudentNumber>A040014000</StudentNumber> <Password>1234567</Password> <Email>[email protected]</Email> </Account> <Account> <StudentNumber>A00024040</StudentNumber> <Password>1234567</Password> <Email>[email protected]</Email> </Account> <Account> <StudentNumber>A00004101</StudentNumber> <Password>1234567</Password> <Email>[email protected]</Email> </Account> </PartTimeAccounts> </School> XMl Schema <?xml version="1.0" encoding="utf-8"?> <xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" targetNamespace="http://www.nothing.com" xmlns="http://www.nothing.com" elementFormDefault="qualified"> <xs:element name="School"> <xs:complexType> <xs:sequence> <xs:element name="SchoolPrefix" minOccurs="1" maxOccurs="1"> <xs:simpleType> <xs:restriction base="xs:string"> <xs:minLength value="2" /> <xs:maxLength value="8" /> </xs:restriction> </xs:simpleType> </xs:element> <xs:element name="TeacherAccounts" minOccurs="1" maxOccurs="1"> <xs:complexType> <xs:sequence> <xs:element name="Account" type="UserInfo" minOccurs="0" maxOccurs="unbounded" /> </xs:sequence> </xs:complexType> </xs:element> <xs:element name="FullTimeAccounts"> <xs:complexType> <xs:sequence> <xs:element name="Account" type="UserInfo" minOccurs="0" maxOccurs="unbounded"/> </xs:sequence> </xs:complexType> </xs:element> <xs:element name="PartTimeAccounts"> <xs:complexType> <xs:sequence> <xs:element name="Account" type="UserInfo" minOccurs="0" maxOccurs="unbounded" /> </xs:sequence> </xs:complexType> </xs:element> </xs:sequence> </xs:complexType> </xs:element> <xs:complexType name="UserInfo"> <xs:sequence> <xs:element name="StudentNumber"> <xs:simpleType> <xs:restriction base="xs:string"> <xs:minLength value="1"/> <xs:maxLength value="50"/> </xs:restriction> </xs:simpleType> </xs:element> <xs:element name="Password"> <xs:simpleType> <xs:restriction base="xs:string"> <xs:minLength value="6"/> <xs:maxLength value="50"/> </xs:restriction> </xs:simpleType> </xs:element> <xs:element name="Email"> <xs:simpleType> <xs:restriction base="xs:string"> <xs:pattern value="\w+([-+.']\w+)*@\w+([-.]\w+)*\.\w+([-.]\w+)*"/> </xs:restriction> </xs:simpleType> </xs:element> </xs:sequence> </xs:complexType> </xs:schema>

  Read the article

• What does Ruby have that Python doesn't, and vice versa?

  - by Lennart Regebro

  There is a lot of discussions of Python vs Ruby, and I all find them completely unhelpful, because they all turn around why feature X sucks in language Y, or that claim language Y doesn't have X, although in fact it does. I also know exactly why I prefer Python, but that's also subjective, and wouldn't help anybody choosing, as they might not have the same tastes in development as I do. It would therefore be interesting to list the differences, objectively. So no "Python's lambdas sucks". Instead explain what Ruby's lambdas can do that Python's can't. No subjectivity. Example code is good! Don't have several differences in one answer, please. And vote up the ones you know are correct, and down those you know are incorrect (or are subjective). Also, differences in syntax is not interesting. We know Python does with indentation what Ruby does with brackets and ends, and that @ is called self in Python. UPDATE: This is now a community wiki, so we can add the big differences here. Ruby has a class reference in the class body In Ruby you have a reference to the class (self) already in the class body. In Python you don't have a reference to the class until after the class construction is finished. An example: class Kaka puts self end self in this case is the class, and this code would print out "Kaka". There is no way to print out the class name or in other ways access the class from the class definition body in Python. All classes are mutable in Ruby This lets you develop extensions to core classes. Here's an example of a rails extension: class String def starts_with?(other) head = self[0, other.length] head == other end end Ruby has Perl-like scripting features Ruby has first class regexps, $-variables, the awk/perl line by line input loop and other features that make it more suited to writing small shell scripts that munge text files or act as glue code for other programs. Ruby has first class continuations Thanks to the callcc statement. In Python you can create continuations by various techniques, but there is no support built in to the language. Ruby has blocks With the "do" statement you can create a multi-line anonymous function in Ruby, which will be passed in as an argument into the method in front of do, and called from there. In Python you would instead do this either by passing a method or with generators. Ruby: amethod { |here| many=lines+of+code goes(here) } Python: def function(here): many=lines+of+code goes(here) amethod(function) Interestingly, the convenience statement in Ruby for calling a block is called "yield", which in Python will create a generator. Ruby: def themethod yield 5 end themethod do |foo| puts foo end Python: def themethod(): yield 5 for foo in themethod: print foo Although the principles are different, the result is strikingly similar. Python has built-in generators (which are used like Ruby blocks, as noted above) Python has support for generators in the language. In Ruby you could use the generator module that uses continuations to create a generator from a block. Or, you could just use a block/proc/lambda! Moreover, in Ruby 1.9 Fibers are, and can be used as, generators. docs.python.org has this generator example: def reverse(data): for index in range(len(data)-1, -1, -1): yield data[index] Contrast this with the above block examples. Python has flexible name space handling In Ruby, when you import a file with require, all the things defined in that file will end up in your global namespace. This causes namespace pollution. The solution to that is Rubys modules. But if you create a namespace with a module, then you have to use that namespace to access the contained classes. In Python, the file is a module, and you can import its contained names with from themodule import *, thereby polluting the namespace if you want. But you can also import just selected names with from themodule import aname, another or you can simply import themodule and then access the names with themodule.aname. If you want more levels in your namespace you can have packages, which are directories with modules and an __init__.py file. Python has docstrings Docstrings are strings that are attached to modules, functions and methods and can be introspected at runtime. This helps for creating such things as the help command and automatic documentation. def frobnicate(bar): """frobnicate takes a bar and frobnicates it >>> bar = Bar() >>> bar.is_frobnicated() False >>> frobnicate(bar) >>> bar.is_frobnicated() True """ Python has more libraries Python has a vast amount of available modules and bindings for libraries. Python has multiple inheritance Ruby does not ("on purpose" -- see Ruby's website, see here how it's done in Ruby). It does reuse the module concept as a sort of abstract classes. Python has list/dict comprehensions Python: res = [x*x for x in range(1, 10)] Ruby: res = (0..9).map { |x| x * x } Python: >>> (x*x for x in range(10)) <generator object <genexpr> at 0xb7c1ccd4> >>> list(_) [0, 1, 4, 9, 16, 25, 36, 49, 64, 81] Ruby: p = proc { |x| x * x } (0..9).map(&p) Python: >>> {x:str(y*y) for x,y in {1:2, 3:4}.items()} {1: '4', 3: '16'} Ruby: >> Hash[{1=>2, 3=>4}.map{|x,y| [x,(y*y).to_s]}] => {1=>"4", 3=>"16"} Python has decorators Things similar to decorators can be created in Ruby, and it can also be argued that they aren't as necessary as in Python.

  Read the article

• How can I use Perl regular expressions to parse XML data?

  - by Luke

  I have a pretty long piece of XML that I want to parse. I want to remove everything except for the subclass-code and city. So that I am left with something like the example below. EXAMPLE TEST SUBCLASS|MIAMI CODE <?xml version="1.0" standalone="no"?> <web-export> <run-date>06/01/2010 <pub-code>TEST <ad-type>TEST <cat-code>Real Estate</cat-code> <class-code>TEST</class-code> <subclass-code>TEST SUBCLASS</subclass-code> <placement-description></placement-description> <position-description>Town House</position-description> <subclass3-code></subclass3-code> <subclass4-code></subclass4-code> <ad-number>0000284708-01</ad-number> <start-date>05/28/2010</start-date> <end-date>06/09/2010</end-date> <line-count>6</line-count> <run-count>13</run-count> <customer-type>Private Party</customer-type> <account-number>100099237</account-number> <account-name>DOE, JOHN</account-name> <addr-1>207 CLARENCE STREET</addr-1> <addr-2> </addr-2> <city>MIAMI</city> <state>FL</state> <postal-code>02910</postal-code> <country>USA</country> <phone-number>4014612880</phone-number> <fax-number></fax-number> <url-addr> </url-addr> <email-addr>[email protected]</email-addr> <pay-flag>N</pay-flag> <ad-description>DEANESTATES2BEDS2BATHSAPPLIANCED</ad-description> <order-source>Import</order-source> <order-status>Live</order-status> <payor-acct>100099237</payor-acct> <agency-flag>N</agency-flag> <rate-note></rate-note> <ad-content> MIAMI&#47;Dean Estates&#58; 2 beds&#44; 2 baths&#46; Applianced&#46; Central air&#46; Carpets&#46; Laundry&#46; 2 decks&#46; Pool&#46; Parking&#46; Close to everything&#46;No smoking&#46; No utilities&#46; &#36;1275 mo&#46; 401&#45;578&#45;1501&#46; </ad-content> </ad-type> </pub-code> </run-date> </web-export> PERL So what I want to do is open an existing file read the contents then use regular expressions to eliminate the unnecessary XML tags. open(READFILE, "FILENAME"); while(<READFILE>) { $_ =~ s/<\?xml version="(.*)" standalone="(.*)"\?>\n.*//g; $_ =~ s/<subclass-code>//g; $_ =~ s/<\/subclass-code>\n.*/|/g; $_ =~ s/(.*)PJ RER Houses /PJ RER Houses/g; $_ =~ s/\G //g; $_ =~ s/<city>//g; $_ =~ s/<\/city>\n.*//g; $_ =~ s/<(\/?)web-export>(.*)\n.*//g; $_ =~ s/<(\/?)run-date>(.*)\n.*//g; $_ =~ s/<(\/?)pub-code>(.*)\n.*//g; $_ =~ s/<(\/?)ad-type>(.*)\n.*//g; $_ =~ s/<(\/?)cat-code>(.*)<(\/?)cat-code>\n.*//g; $_ =~ s/<(\/?)class-code>(.*)<(\/?)class-code>\n.*//g; $_ =~ s/<(\/?)placement-description>(.*)<(\/?)placement-description>\n.*//g; $_ =~ s/<(\/?)position-description>(.*)<(\/?)position-description>\n.*//g; $_ =~ s/<(\/?)subclass3-code>(.*)<(\/?)subclass3-code>\n.*//g; $_ =~ s/<(\/?)subclass4-code>(.*)<(\/?)subclass4-code>\n.*//g; $_ =~ s/<(\/?)ad-number>(.*)<(\/?)ad-number>\n.*//g; $_ =~ s/<(\/?)start-date>(.*)<(\/?)start-date>\n.*//g; $_ =~ s/<(\/?)end-date>(.*)<(\/?)end-date>\n.*//g; $_ =~ s/<(\/?)line-count>(.*)<(\/?)line-count>\n.*//g; $_ =~ s/<(\/?)run-count>(.*)<(\/?)run-count>\n.*//g; $_ =~ s/<(\/?)customer-type>(.*)<(\/?)customer-type>\n.*//g; $_ =~ s/<(\/?)account-number>(.*)<(\/?)account-number>\n.*//g; $_ =~ s/<(\/?)account-name>(.*)<(\/?)account-name>\n.*//g; $_ =~ s/<(\/?)addr-1>(.*)<(\/?)addr-1>\n.*//g; $_ =~ s/<(\/?)addr-2>(.*)<(\/?)addr-2>\n.*//g; $_ =~ s/<(\/?)state>(.*)<(\/?)state>\n.*//g; $_ =~ s/<(\/?)postal-code>(.*)<(\/?)postal-code>\n.*//g; $_ =~ s/<(\/?)country>(.*)<(\/?)country>\n.*//g; $_ =~ s/<(\/?)phone-number>(.*)<(\/?)phone-number>\n.*//g; $_ =~ s/<(\/?)fax-number>(.*)<(\/?)fax-number>\n.*//g; $_ =~ s/<(\/?)url-addr>(.*)<(\/?)url-addr>\n.*//g; $_ =~ s/<(\/?)email-addr>(.*)<(\/?)email-addr>\n.*//g; $_ =~ s/<(\/?)pay-flag>(.*)<(\/?)pay-flag>\n.*//g; $_ =~ s/<(\/?)ad-description>(.*)<(\/?)ad-description>\n.*//g; $_ =~ s/<(\/?)order-source>(.*)<(\/?)order-source>\n.*//g; $_ =~ s/<(\/?)order-status>(.*)<(\/?)order-status>\n.*//g; $_ =~ s/<(\/?)payor-acct>(.*)<(\/?)payor-acct>\n.*//g; $_ =~ s/<(\/?)agency-flag>(.*)<(\/?)agency-flag>\n.*//g; $_ =~ s/<(\/?)rate-note>(.*)<(\/?)rate-note>\n.*//g; $_ =~ s/<ad-content>(.*)\n.*//g; $_ =~ s/\t(.*)\n.*//g; $_ =~ s/<\/ad-content>(.*)\n.*//g; } close( READFILE1 ); Is there an easier way of doing this? I don't want to use any modules. I know that it might make this easier but the file I am reading has a lot of data in it.

  Read the article

• How do i call bash script function using exec function by passing parameter in php?

  - by Stan

  I have created a bash script that install magento in a cpanel. but i have a problem regarding the exec function. $function_path = Mage::getBaseDir()."/media/installer/function.sh"; exec("$function_path $db_host $db_name $db_user $db_pass $url $ad_user $ad_pass $ad_email"); This the bash shell script function.sh #!/bin/bash magento_detail $dbhost $dbname $dbuser $dbpass $url $admin_username $admin_password $admin_email function magento_detail() { stty erase '^?' echo "To install Magento, you will need a blank database ready with a user assigned to it." echo -n "Do you have all of your database information" dbinfo = "y" echo $dbinfo if [ "$dbinfo" -eq 'y' ] then echo "Database Host (usually localhost) : $dbhost " echo "Database Name : $dbname " echo "Database User : $dbuser " echo "Database Password : $dbpass " echo "Store Url : $url " echo "Admin Username : $admin_username " echo "Admin Password : $admin_password " echo "Admin Email Address : $admin_email " echo -n "Include Sample Data? (y/n) " echo sample = "y" if [ "$sample" -eq "y" ]; then echo echo "Now installing Magento with sample data..." echo echo "Downloading packages..." echo wget http://www.magentocommerce.com/downloads/assets/1.5.1.0/magento-1.5.1.0.tar.gz wget http://www.magentocommerce.com/downloads/assets/1.2.0/magento-sample-data-1.2.0.tar.gz echo echo "Extracting data..." echo tar -zxvf magento-1.5.1.0.tar.gz tar -zxvf magento-sample-data-1.2.0.tar.gz echo echo "Moving files..." echo mv magento-sample-data-1.2.0/media/* magento/media/ mv magento-sample-data-1.2.0/magento_sample_data_for_1.2.0.sql magento/data.sql mv magento/index.php magento/.htaccess ./$test1 echo echo "Setting permissions..." echo chmod o+w var var/.htaccess app/etc chmod -R o+w media echo echo "Importing sample products..." echo mysql -h $dbhost -u $dbuser -p$dbpass $dbname < data.sql echo echo "Initializing PEAR registry..." echo chmod 550 mage ./mage mage-setup . echo echo "Downloading packages..." echo echo echo "Cleaning up files..." echo rm -rf downloader/pearlib/cache/* downloader/pearlib/download/* rm -rf magento/ magento-sample-data-1.2.0/ rm -rf magento-1.5.1.0.tar.gz magento-sample-data-1.2.0.tar.gz data.sql rm -rf index.php.sample .htaccess.sample php.ini.sample LICENSE.txt STATUS.txt data.sql echo echo "Installing Magento..." echo php -f install.php --license_agreement_accepted "yes" --locale "en_US" --timezone "America/Los_Angeles" --default_currency "USD" --db_host "$dbhost" --db_name "$dbname" --db_user "$dbuser" --db_pass "$dbpass" --url "$url" --use_rewrites "yes" --use_secure "no" --secure_base_url "" --use_secure_admin "no" --admin_email "$admin_email" --admin_username "$admin_username" --admin_password "$admin_password" echo echo "Finished installing Magento" echo exit else echo "Now installing Magento without sample data..." echo echo "Downloading packages..." echo wget http://www.magentocommerce.com/downloads/assets/1.5.1.0/magento-1.5.1.0.tar.gz echo echo "Extracting data..." echo tar -zxvf magento-1.5.1.0.tar.gz echo echo "Moving files..." echo mv magento/* magento/.htaccess . echo echo "Setting permissions..." echo chmod o+w var var/.htaccess app/etc chmod -R o+w media echo echo "Initializing PEAR registry..." echo chmod 550 mage ./mage mage-setup . echo echo "Downloading packages..." echo echo echo "Cleaning up files..." echo rm -rf downloader/pearlib/cache/* downloader/pearlib/download/* rm -rf magento/ magento-1.5.1.0.tar.gz rm -rf index.php.sample .htaccess.sample php.ini.sample LICENSE.txt STATUS.txt echo echo "Installing Magento..." echo php -f install.php --license_agreement_accepted "yes" --locale "en_US" --timezone "America/Los_Angeles" --default_currency "USD" --db_host "$dbhost" --db_name "$dbname" --db_user "$dbuser" --db_pass "$dbpass" --url "$url" --use_rewrites "yes" --use_secure "no" --secure_base_url "" --use_secure_admin "no" --admin_email "$admin_email" --admin_username "$admin_username" --admin_password "$admin_password" echo echo "Finished installing Magento else part" exit fi else echo "Please setup a database first. Don't forget to assign a database user!" exit fi }` when i run this exec command,at that time it calls bash script function magento_installer() which contains arguments $db_host $db_name $db_user $db_pass $url $ad_user $ad_pass $ad_email. above arguments i'll pass in exec command to call magento_installer() function of bash script. so, is it right way of calling a bash script function? It directly goes to the last step of if condition and prints "Please setup a database first. Don't forget to assign a database user!". It cant enter it in if condition and directly goes to else condition. so please help me?

  Read the article

• I need help on my C++ assignment using Microsoft Visual C++

  - by krayzwytie

  Ok, so I don't want you to do my homework for me, but I'm a little lost with this final assignment and need all the help I can get. Learning about programming is tough enough, but doing it online is next to impossible for me... Now, to get to the program, I am going to paste what I have so far. This includes mostly //comments and what I have written so far. If you can help me figure out where all the errors are and how to complete the assignment, I will really appreciate it. Like I said, I don't want you to do my homework for me (it's my final), but any constructive criticism is welcome. This is my final assignment for this class and it is due tomorrow (Sunday before midnight, Arizona time). This is the assignment: Examine the following situation: Your company, Datamax, Inc., is in the process of automating its payroll systems. Your manager has asked you to create a program that calculates overtime pay for all employees. Your program must take into account the employee’s salary, total hours worked, and hours worked more than 40 in a week, and then provide an output that is useful and easily understood by company management. Compile your program utilizing the following background information and the code outline in Appendix D (included in the code section). Submit your project as an attachment including the code and the output. Company Background: Three employees: Mark, John, and Mary The end user needs to be prompted for three specific pieces of input—name, hours worked, and hourly wage. Calculate overtime if input is greater than 40 hours per week. Provide six test plans to verify the logic within the program. Plan 1 must display the proper information for employee #1 with overtime pay. Plan 2 must display the proper information for employee #1 with no overtime pay. Plans 3-6 are duplicates of plan 1 and 2 but for the other employees. Program Requirements: Define a base class to use for the entire program. The class holds the function calls and the variables related to the overtime pay calculations. Define one object per employee. Note there will be three employees. Your program must take the objects created and implement calculations based on total salaries, total hours, and the total number of overtime hours. See the Employee Summary Data section of the sample output. Logic Steps to Complete Your Program: Define your base class. Define your objects from your base class. Prompt for user input, updating your object classes for all three users. Implement your overtime pay calculations. Display overtime or regular time pay calculations. See the sample output below. Implement object calculations by summarizing your employee objects and display the summary information in the example below. And this is the code: // Final_Project.cpp : Defines the entry point for the console application. // #include "stdafx.h" #include <iostream> #include <string> #include <iomanip> using namespace std; // //CLASS DECLARATION SECTION // class CEmployee { public: void ImplementCalculations(string EmployeeName, double hours, double wage); void DisplayEmployInformation(void); void Addsomethingup (CEmployee, CEmployee, CEmployee); string EmployeeName ; int hours ; int overtime_hours ; int iTotal_hours ; int iTotal_OvertimeHours ; float wage ; float basepay ; float overtime_pay ; float overtime_extra ; float iTotal_salaries ; float iIndividualSalary ; }; int main() { system("cls"); cout << "Welcome to the Employee Pay Center"; /* Use this section to define your objects. You will have one object per employee. You have only three employees. The format is your class name and your object name. */ std::cout << "Please enter Employee's Name: "; std::cin >> EmployeeName; std::cout << "Please enter Total Hours for (EmployeeName): "; std::cin >> hours; std::cout << "Please enter Base Pay for(EmployeeName): "; std::cin >> basepay; /* Here you will prompt for the first employee’s information. Prompt the employee name, hours worked, and the hourly wage. For each piece of information, you will update the appropriate class member defined above. Example of Prompts Enter the employee name = Enter the hours worked = Enter his or her hourly wage = */ /* Here you will prompt for the second employee’s information. Prompt the employee name, hours worked, and the hourly wage. For each piece of information, you will update the appropriate class member defined above. Enter the employee name = Enter the hours worked = Enter his or her hourly wage = */ /* Here you will prompt for the third employee’s information. Prompt the employee name, hours worked, and the hourly wage. For each piece of information, you will update the appropriate class member defined above. Enter the employee name = Enter the hours worked = Enter his or her hourly wage = */ /* Here you will implement a function call to implement the employ calcuations for each object defined above. You will do this for each of the three employees or objects. The format for this step is the following: [(object name.function name(objectname.name, objectname.hours, objectname.wage)] ; */ /* This section you will send all three objects to a function that will add up the the following information: - Total Employee Salaries - Total Employee Hours - Total Overtime Hours The format for this function is the following: - Define a new object. - Implement function call [objectname.functionname(object name 1, object name 2, object name 3)] /* } //End of Main Function void CEmployee::ImplementCalculations (string EmployeeName, double hours, double wage){ //Initialize overtime variables overtime_hours=0; overtime_pay=0; overtime_extra=0; if (hours > 40) { /* This section is for the basic calculations for calculating overtime pay. - base pay = 40 hours times the hourly wage - overtime hours = hours worked – 40 - overtime pay = hourly wage * 1.5 - overtime extra pay over 40 = overtime hours * overtime pay - salary = overtime money over 40 hours + your base pay */ /* Implement function call to output the employee information. Function is defined below. */ } // if (hours > 40) else { /* Here you are going to calculate the hours less than 40 hours. - Your base pay is = your hours worked times your wage - Salary = your base pay */ /* Implement function call to output the employee information. Function is defined below. */ } // End of the else } //End of Primary Function void CEmployee::DisplayEmployInformation(); { // This function displays all the employee output information. /* This is your cout statements to display the employee information: Employee Name ............. = Base Pay .................. = Hours in Overtime ......... = Overtime Pay Amount........ = Total Pay ................. = */ } // END OF Display Employee Information void CEmployee::Addsomethingup (CEmployee Employ1, CEmployee Employ2) { // Adds two objects of class Employee passed as // function arguments and saves them as the calling object's data member values. /* Add the total hours for objects 1, 2, and 3. Add the salaries for each object. Add the total overtime hours. */ /* Then display the information below. %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %%%% EMPLOYEE SUMMARY DATA%%%%%%%%%%%%%%%%%%%%%%% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %%%% Total Employee Salaries ..... = 576.43 %%%% Total Employee Hours ........ = 108 %%%% Total Overtime Hours......... = 5 %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% */ } // End of function

  Read the article

• SQL error - Cannot convert nvarchar to decimal

  - by jakesankey

  I have a C# application that simply parses all of the txt documents within a given network directory and imports the data to a SQL server db. Everything was cruising along just fine until about the 1800th file when it happend to have a few blanks in columns that are called out as DBType.Decimal (and the value is usually zero in the files, not blank). So I got this error, "cannot convert nvarchar to decimal". I am wondering how I could tell the app to simply skip the lines that have this issue?? Perhaps I could even just change the column type to varchar even tho values are numbers (what problems could this create?) Thanks for any help! using System; using System.Data; using System.Data.SQLite; using System.IO; using System.Text.RegularExpressions; using System.Threading; using System.Collections.Generic; using System.Linq; using System.Data.SqlClient; namespace JohnDeereCMMDataParser { internal class Program { public static List<string> GetImportedFileList() { List<string> ImportedFiles = new List<string>(); using (SqlConnection connect = new SqlConnection(@"Server=FRXSQLDEV;Database=RX_CMMData;Integrated Security=YES")) { connect.Open(); using (SqlCommand fmd = connect.CreateCommand()) { fmd.CommandText = @"SELECT FileName FROM CMMData;"; fmd.CommandType = CommandType.Text; SqlDataReader r = fmd.ExecuteReader(); while (r.Read()) { ImportedFiles.Add(Convert.ToString(r["FileName"])); } } } return ImportedFiles; } private static void Main(string[] args) { Console.Title = "John Deere CMM Data Parser"; Console.WriteLine("Preparing CMM Data Parser... done"); Console.WriteLine("Scanning for new CMM data..."); Console.ForegroundColor = ConsoleColor.Gray; using (SqlConnection con = new SqlConnection(@"Server=FRXSQLDEV;Database=RX_CMMData;Integrated Security=YES")) { con.Open(); using (SqlCommand insertCommand = con.CreateCommand()) { Console.WriteLine("Connecting to SQL server..."); SqlCommand cmdd = con.CreateCommand(); string[] files = Directory.GetFiles(@"C:\Documents and Settings\js91162\Desktop\CMM WENZEL\", "*_*_*.txt", SearchOption.AllDirectories); List<string> ImportedFiles = GetImportedFileList(); insertCommand.Parameters.Add(new SqlParameter("@FeatType", DbType.String)); insertCommand.Parameters.Add(new SqlParameter("@FeatName", DbType.String)); insertCommand.Parameters.Add(new SqlParameter("@Axis", DbType.String)); insertCommand.Parameters.Add(new SqlParameter("@Actual", DbType.Decimal)); insertCommand.Parameters.Add(new SqlParameter("@Nominal", DbType.Decimal)); insertCommand.Parameters.Add(new SqlParameter("@Dev", DbType.Decimal)); insertCommand.Parameters.Add(new SqlParameter("@TolMin", DbType.Decimal)); insertCommand.Parameters.Add(new SqlParameter("@TolPlus", DbType.Decimal)); insertCommand.Parameters.Add(new SqlParameter("@OutOfTol", DbType.Decimal)); foreach (string file in files.Except(ImportedFiles)) { var FileNameExt1 = Path.GetFileName(file); cmdd.Parameters.Clear(); cmdd.Parameters.Add(new SqlParameter("@FileExt", FileNameExt1)); cmdd.CommandText = @" IF (EXISTS (SELECT * FROM INFORMATION_SCHEMA.TABLES WHERE TABLE_SCHEMA = 'RX_CMMData' AND TABLE_NAME = 'CMMData')) BEGIN SELECT COUNT(*) FROM CMMData WHERE FileName = @FileExt; END"; int count = Convert.ToInt32(cmdd.ExecuteScalar()); con.Close(); con.Open(); if (count == 0) { Console.WriteLine("Preparing to parse CMM data for SQL import..."); if (file.Count(c => c == '_') > 5) continue; insertCommand.CommandText = @" INSERT INTO CMMData (FeatType, FeatName, Axis, Actual, Nominal, Dev, TolMin, TolPlus, OutOfTol, PartNumber, CMMNumber, Date, FileName) VALUES (@FeatType, @FeatName, @Axis, @Actual, @Nominal, @Dev, @TolMin, @TolPlus, @OutOfTol, @PartNumber, @CMMNumber, @Date, @FileName);"; string FileNameExt = Path.GetFullPath(file); string RNumber = Path.GetFileNameWithoutExtension(file); int index2 = RNumber.IndexOf("~"); Match RNumberE = Regex.Match(RNumber, @"^(R|L)\d{6}(COMP|CRIT|TEST|SU[1-9])(?=_)", RegexOptions.IgnoreCase); Match RNumberD = Regex.Match(RNumber, @"(?<=_)\d{3}[A-Z]\d{4}|\d{3}[A-Z]\d\w\w\d(?=_)", RegexOptions.IgnoreCase); Match RNumberDate = Regex.Match(RNumber, @"(?<=_)\d{8}(?=_)", RegexOptions.IgnoreCase); string RNumE = Convert.ToString(RNumberE); string RNumD = Convert.ToString(RNumberD); if (RNumberD.Value == @"") continue; if (RNumberE.Value == @"") continue; if (RNumberDate.Value == @"") continue; if (index2 != -1) continue; DateTime dateTime = DateTime.ParseExact(RNumberDate.Value, "yyyyMMdd", Thread.CurrentThread.CurrentCulture); string cmmDate = dateTime.ToString("dd-MMM-yyyy"); string[] lines = File.ReadAllLines(file); bool parse = false; foreach (string tmpLine in lines) { string line = tmpLine.Trim(); if (!parse && line.StartsWith("Feat. Type,")) { parse = true; continue; } if (!parse || string.IsNullOrEmpty(line)) { continue; } Console.WriteLine(tmpLine); foreach (SqlParameter parameter in insertCommand.Parameters) { parameter.Value = null; } string[] values = line.Split(new[] { ',' }); for (int i = 0; i < values.Length - 1; i++) { if (i = "" || i = null) continue; SqlParameter param = insertCommand.Parameters[i]; if (param.DbType == DbType.Decimal) { decimal value; param.Value = decimal.TryParse(values[i], out value) ? value : 0; } else { param.Value = values[i]; } } insertCommand.Parameters.Add(new SqlParameter("@PartNumber", RNumE)); insertCommand.Parameters.Add(new SqlParameter("@CMMNumber", RNumD)); insertCommand.Parameters.Add(new SqlParameter("@Date", cmmDate)); insertCommand.Parameters.Add(new SqlParameter("@FileName", FileNameExt)); insertCommand.ExecuteNonQuery(); insertCommand.Parameters.RemoveAt("@PartNumber"); insertCommand.Parameters.RemoveAt("@CMMNumber"); insertCommand.Parameters.RemoveAt("@Date"); insertCommand.Parameters.RemoveAt("@FileName"); } } } Console.WriteLine("CMM data successfully imported to SQL database..."); } con.Close(); } } } }

  Read the article

• Perl LWP::UserAgent mishandling UTF-8 response

  - by RedGrittyBrick

  When I use LWP::UserAgent to retrieve content encoded in UTF-8 it seems LWP::UserAgent doesn't handle the encoding correctly. Here's the output after setting the Command Prompt window to Unicode by the command chcp 65001 Note that this initially gives the appearance that all is well, but I think it's just the shell reassembling bytes and decoding UTF-8, From the other output you can see that perl itself is not handling wide characters correctly. C:\perl getutf8.pl ====================================================================== HTTP/1.1 200 OK Connection: close Date: Fri, 31 Dec 2010 19:24:04 GMT Accept-Ranges: bytes Server: Apache/2.2.8 (Win32) PHP/5.2.6 Content-Length: 75 Content-Type: application/xml; charset=utf-8 Last-Modified: Fri, 31 Dec 2010 19:20:18 GMT Client-Date: Fri, 31 Dec 2010 19:24:04 GMT Client-Peer: 127.0.0.1:80 Client-Response-Num: 1 <?xml version="1.0" encoding="UTF-8"? <nameBudejovický Budvar</name ====================================================================== response content length is 33 ....v....1....v....2....v....3....v....4 <nameBudejovický Budvar</name . . . . v . . . . 1 . . . . v . . . . 2 . . . . v . . . . 3 . . . . 3c6e616d653e427564c49b6a6f7669636bc3bd204275647661723c2f6e616d653e < n a m e B u d ? ? j o v i c k ? ? B u d v a r < / n a m e Above you can see the payload length is 31 characters but Perl thinks it is 33. For confirmation, in the hex, we can see that the UTF-8 sequences c49b and c3bd are being interpreted as four separate characters and not as two Unicode characters. Here's the code #!perl use strict; use warnings; use LWP::UserAgent; my $ua = LWP::UserAgent-new(); my $response = $ua-get('http://localhost/Bud.xml'); if (! $response-is_success) { die $response-status_line; } print '='x70,"\n",$response-as_string(), '='x70,"\n"; my $r = $response-decoded_content((charset = 'UTF-8')); $/ = "\x0d\x0a"; # seems to be \x0a otherwise! chomp($r); # Remove any xml prologue $r =~ s/^<\?.*\?\x0d\x0a//; print "Response content length is ", length($r), "\n\n"; print "....v....1....v....2....v....3....v....4\n"; print $r,"\n"; print ". . . . v . . . . 1 . . . . v . . . . 2 . . . . v . . . . 3 . . . . \n"; print unpack("H*", $r), "\n"; print join(" ", split("", $r)), "\n"; Note that Bud.xml is UTF-8 encoded without a BOM. How can I persuade LWP::UserAgent to do the right thing? P.S. Ultimately I want to translate the Unicode data into an ASCII encoding, even if it means replacing each non-ASCII character with one question mark or other marker. I have accepted Ysth's "upgrade" answer - because I know it is the right thing to do when possible. However I am going to use a work-around (which may depress Tom further): $r = encode("cp437", decode("utf8", $r));

  Read the article

• Embedding mercurial revision information in Visual Studio c# projects automatically

  - by Mark Booth

  Original Problem In building our projects, I want the mercurial id of each repository to be embedded within the product(s) of that repository (the library, application or test application). I find it makes it so much easier to debug an application ebing run by custiomers 8 timezones away if you know precisely what went into building the particular version of the application they are using. As such, every project (application or library) in our systems implement a way of getting at the associated revision information. I also find it very useful to be able to see if an application has been compiled with clean (un-modified) changesets from the repository. 'Hg id' usefully appends a + to the changeset id when there are uncommitted changes in a repository, so this allows is to easily see if people are running a clean or a modified version of the code. My current solution is detailed below, and fulfills the basic requirements, but there are a number of problems with it. Current Solution At the moment, to each and every Visual Studio solution, I add the following "Pre-build event command line" commands: cd $(ProjectDir) HgID I also add an HgID.bat file to the Project directory: @echo off type HgId.pre > HgId.cs For /F "delims=" %%a in ('hg id') Do <nul >>HgID.cs set /p = @"%%a" echo ; >> HgId.cs echo } >> HgId.cs echo } >> HgId.cs along with an HgId.pre file, which is defined as: namespace My.Namespace { /// <summary> Auto generated Mercurial ID class. </summary> internal class HgID { /// <summary> Mercurial version ID [+ is modified] [Named branch]</summary> public const string Version = When I build my application, the pre-build event is triggered on all libraries, creating a new HgId.cs file (which is not kept under revision control) and causing the library to be re-compiled with with the new 'hg id' string in 'Version'. Problems with the current solution The main problem is that since the HgId.cs is re-created at each pre-build, every time we need to compile anything, all projects in the current solution are re-compiled. Since we want to be able to easily debug into our libraries, we usually keep many libraries referenced in our main application solution. This can result in build times which are significantly longer than I would like. Ideally I would like the libraries to compile only if the contents of the HgId.cs file has actually changed, as opposed to having been re-created with exactly the same contents. The second problem with this method is it's dependence on specific behaviour of the windows shell. I've already had to modify the batch file several times, since the original worked under XP but not Vista, the next version worked under Vista but not XP and finally I managed to make it work with both. Whether it will work with Windows 7 however is anyones guess and as time goes on, I see it more likely that contractors will expect to be able to build our apps on their Windows 7 boxen. Finally, I have an aesthetic problem with this solution, batch files and bodged together template files feel like the wrong way to do this. My actual questions How would you solve/how are you solving the problem I'm trying to solve? What better options are out there than what I'm currently doing? Rejected Solutions to these problems Before I implemented the current solution, I looked at Mercurials Keyword extension, since it seemed like the obvious solution. However the more I looked at it and read peoples opinions, the more that I came to the conclusion that it wasn't the right thing to do. I also remember the problems that keyword substitution has caused me in projects at previous companies (just the thought of ever having to use Source Safe again fills me with a feeling of dread *8'). Also, I don't particularly want to have to enable Mercurial extensions to get the build to complete. I want the solution to be self contained, so that it isn't easy for the application to be accidentally compiled without the embedded version information just because an extension isn't enabled or the right helper software hasn't been installed. I also thought of writing this in a better scripting language, one where I would only write HgId.cs file if the content had actually changed, but all of the options I could think of would require my co-workers, contractors and possibly customers to have to install software they might not otherwise want (for example cygwin). Any other options people can think of would be appreciated. Update Partial solution Having played around with it for a while, I've managed to get the HgId.bat file to only overwrite the HgId.cs file if it changes: @echo off type HgId.pre > HgId.cst For /F "delims=" %%a in ('hg id') Do <nul >>HgId.cst set /p = @"%%a" echo ; >> HgId.cst echo } >> HgId.cst echo } >> HgId.cst fc HgId.cs HgId.cst >NUL if %errorlevel%==0 goto :ok copy HgId.cst HgId.cs :ok del HgId.cst Problems with this solution Even though HgId.cs is no longer being re-created every time, Visual Studio still insists on compiling everything every time. I've tried looking for solutions and tried checking "Only build startup projects and dependencies on Run" in Tools|Options|Projects and Solutions|Build and Run but it makes no difference. The second problem also remains, and now I have no way to test if it will work with Vista, since that contractor is no longer with us. If anyone can test this batch file on a Windows 7 and/or Vista box, I would appreciate hearing how it went. Finally, my aesthetic problem with this solution, is even strnger than it was before, since the batch file is more complex and this there is now more to go wrong. If you can think of any better solution, I would love to hear about them.

  Read the article

• ListView not showing up in fragment

  - by aindurti

  When I insert a listview in a fragment in my application, it doesn't show up after I populate it with items. In fact, the application crashes due to a NullPointerException. Can anybody help me? Here is the detail activity from which I show the fragments. package com.example.sample; import android.content.Intent; import android.os.Bundle; import android.support.v4.app.Fragment; import android.support.v4.app.FragmentTransaction; import android.support.v4.app.NavUtils; import android.widget.ArrayAdapter; import android.widget.ListView; import com.actionbarsherlock.app.ActionBar; import com.actionbarsherlock.app.ActionBar.Tab; import com.actionbarsherlock.app.SherlockFragmentActivity; import com.actionbarsherlock.view.MenuItem; /** * An activity representing a single Course detail screen. This activity is only * used on handset devices. On tablet-size devices, item details are presented * side-by-side with a list of items in a {@link CourseListActivity}. * <p> * This activity is mostly just a 'shell' activity containing nothing more than * a {@link CourseDetailFragment}. */ public class CourseDetailActivity extends SherlockFragmentActivity { @Override protected void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.activity_course_detail); // Show the Up button in the action bar. ActionBar actionBar = getSupportActionBar(); actionBar.setDisplayHomeAsUpEnabled(true); actionBar.setNavigationMode(ActionBar.NAVIGATION_MODE_TABS); // initiating both tabs and set text to it. ActionBar.Tab assignTab = actionBar.newTab().setText("Assignments"); ActionBar.Tab schedTab = actionBar.newTab().setText("Schedule"); ActionBar.Tab contactTab = actionBar.newTab().setText("Contact"); // Create three fragments to display content Fragment assignFragment = new Assignments(); Fragment schedFragment = new Schedule(); Fragment contactFragment = new Contact(); assignTab.setTabListener(new MyTabsListener(assignFragment)); schedTab.setTabListener(new MyTabsListener(schedFragment)); contactTab.setTabListener(new MyTabsListener(contactFragment)); actionBar.addTab(assignTab); actionBar.addTab(schedTab); actionBar.addTab(contactTab); ListView listView = (ListView) findViewById(R.id.assignlist); String[] values = new String[] { "Android", "iPhone", "WindowsMobile", "Blackberry", "WebOS", "Ubuntu", "Windows7", "Max OS X", "Linux", "OS/2" }; // First paramenter - Context // Second parameter - Layout for the row // Third parameter - ID of the TextView to which the data is written // Forth - the Array of data ArrayAdapter<String> adapter = new ArrayAdapter<String>(this, android.R.layout.simple_list_item_1, android.R.id.text1, values); // Assign adapter to ListView listView.setAdapter(adapter); } @Override public boolean onOptionsItemSelected(MenuItem item) { switch (item.getItemId()) { case android.R.id.home: // This ID represents the Home or Up button. In the case of this // activity, the Up button is shown. Use NavUtils to allow users // to navigate up one level in the application structure. For // more details, see the Navigation pattern on Android Design: // // http://developer.android.com/design/patterns/navigation.html#up-vs-back // NavUtils.navigateUpTo(this, new Intent(this, CourseListActivity.class)); return true; } return super.onOptionsItemSelected(item); } class MyTabsListener implements ActionBar.TabListener { public Fragment fragment; public Fragment fragment2; public MyTabsListener(Fragment fragment) { this.fragment = fragment; } @Override public void onTabReselected(Tab tab, FragmentTransaction ft) { } @Override public void onTabSelected(Tab tab, FragmentTransaction ft) { ft.replace(R.id.main_across, fragment); } @Override public void onTabUnselected(Tab tab, FragmentTransaction ft) { ft.remove(fragment); } } } The fragment that I am currently trying to get working is called the Assignments fragment. As you can see in the CourseDetailActvity, I populate smaple items in the listview to see if it the listview shows up. The fragment gets inflated properly, but when I try to add items to the listview, the application crashes! Here is the logcat. 11-17 11:54:28.037: E/AndroidRuntime(282): FATAL EXCEPTION: main 11-17 11:54:28.037: E/AndroidRuntime(282): java.lang.RuntimeException: Unable to start activity ComponentInfo{com.example.sample/com.example.sample.CourseDetailActivity}: java.lang.NullPointerException 11-17 11:54:28.037: E/AndroidRuntime(282): at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:2663) 11-17 11:54:28.037: E/AndroidRuntime(282): at android.app.ActivityThread.handleLaunchActivity(ActivityThread.java:2679) 11-17 11:54:28.037: E/AndroidRuntime(282): at android.app.ActivityThread.access$2300(ActivityThread.java:125) 11-17 11:54:28.037: E/AndroidRuntime(282): at android.app.ActivityThread$H.handleMessage(ActivityThread.java:2033) 11-17 11:54:28.037: E/AndroidRuntime(282): at android.os.Handler.dispatchMessage(Handler.java:99) 11-17 11:54:28.037: E/AndroidRuntime(282): at android.os.Looper.loop(Looper.java:123) 11-17 11:54:28.037: E/AndroidRuntime(282): at android.app.ActivityThread.main(ActivityThread.java:4627) 11-17 11:54:28.037: E/AndroidRuntime(282): at java.lang.reflect.Method.invokeNative(Native Method) 11-17 11:54:28.037: E/AndroidRuntime(282): at java.lang.reflect.Method.invoke(Method.java:521) 11-17 11:54:28.037: E/AndroidRuntime(282): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:868) 11-17 11:54:28.037: E/AndroidRuntime(282): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:626) 11-17 11:54:28.037: E/AndroidRuntime(282): at dalvik.system.NativeStart.main(Native Method) 11-17 11:54:28.037: E/AndroidRuntime(282): Caused by: java.lang.NullPointerException 11-17 11:54:28.037: E/AndroidRuntime(282): at com.example.sample.CourseDetailActivity.onCreate(CourseDetailActivity.java:66) 11-17 11:54:28.037: E/AndroidRuntime(282): at android.app.Instrumentation.callActivityOnCreate(Instrumentation.java:1047) 11-17 11:54:28.037: E/AndroidRuntime(282): at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:2627) 11-17 11:54:28.037: E/AndroidRuntime(282): ... 11 more

  Read the article

• what "Debug Assertion Failed" mean and how to fix it, c++?

  - by nonon

  hi, why this program gives me a "Debug Assertion Failed" Error Message while running #include "stdafx.h" #include "iostream" #include "fstream" #include "string" using namespace std; int conv_ch(char b) { int f; f=b; b=b+0; switch(b) { case 48: f=0; break; case 49: f=1; break; case 50: f=2; break; case 51: f=3; break; case 52: f=4; break; case 53: f=5; break; case 54: f=6; break; case 55: f=7; break; case 56: f=8; break; case 57: f=9; break; default: f=0; } return f; } class Student { public: string id; size_t id_len; string first_name; size_t first_len; string last_name; size_t last_len; string phone; size_t phone_len; string grade; size_t grade_len; void print(); void clean(); }; void Student::clean() { id.erase (id.begin()+6, id.end()); first_name.erase (first_name.begin()+15, first_name.end()); last_name.erase (last_name.begin()+15, last_name.end()); phone.erase (phone.begin()+10, phone.end()); grade.erase (grade.begin()+2, grade.end()); } void Student::print() { int i; for(i=0;i<6;i++) { cout<<id[i]; } cout<<endl; for(i=0;i<15;i++) { cout<<first_name[i]; } cout<<endl; for(i=0;i<15;i++) { cout<<last_name[i]; } cout<<endl; for(i=0;i<10;i++) { cout<<phone[i]; } cout<<endl; for(i=0;i<2;i++) { cout<<grade[i]; } cout<<endl; } int main() { Student k[80]; char data[1200]; int length,i,recn=0; int rec_length; int counter = 0; fstream myfile; char x1,x2; char y1,y2; char zz; int ad=0; int ser,j; myfile.open ("example.txt",ios::in); int right; int left; int middle; string key; while(!myfile.eof()){ myfile.get(data,1200); char * pch; pch = strtok (data, "#"); printf ("%s\n", pch); j=0; for(i=0;i<6;i++) { k[recn].id[i]=data[j]; j++; } for(i=0;i<15;i++) { k[recn].first_name[i]=data[j]; j++; } for(i=0;i<15;i++) { k[recn].last_name[i]=data[j]; j++; } for(i=0;i<10;i++) { k[recn].phone[i]=data[j]; j++; } for(i=0;i<2;i++) { k[recn].grade[i]=data[j]; j++; } recn++; j=0; } //cout<<recn; string temp1; size_t temp2; int temp3; for(i=0;i<recn-1;i++) { for(j=0;j<recn-1;j++) { if(k[i].id.compare(k[j].id)<0) { temp1 = k[i].first_name; k[i].first_name = k[j].first_name; k[j].first_name = temp1; temp2 = k[i].first_len; k[i].first_len = k[j].first_len; k[j].first_len = temp2; temp1 = k[i].last_name; k[i].last_name = k[j].last_name; k[j].last_name = temp1; temp2 = k[i].last_len; k[i].last_len = k[j].last_len; k[j].last_len = temp2; temp1 = k[i].grade; k[i].grade = k[j].grade; k[j].grade = temp1; temp2 = k[i].grade_len; k[i].grade_len = k[j].grade_len; k[j].grade_len = temp2; temp1 = k[i].id; k[i].id = k[j].id; k[j].id = temp1; temp2 = k[i].id_len; k[i].id_len = k[j].id_len; k[j].id_len = temp2; temp1 = k[i].phone; k[i].phone = k[j].phone; k[j].phone = temp1; temp2 = k[i].phone_len; k[i].phone_len = k[j].phone_len; k[j].phone_len = temp2; } } } for(i=0;i<recn-1;i++) { k[i].clean(); } char z; string id_sear; cout<<"Enter 1 to display , 2 to search , 3 to exit:"; cin>>z; while(1){ switch(z) { case '1': for(i=0;i<recn-1;i++) { k[i].print(); } break; case '2': cin>>key; right=0; left=recn-2; while(right<=left) { middle=((right+left)/2); if(key.compare(k[middle].id)==0){ cout<<"Founded"<<endl; k[middle].print(); break; } else if(key.compare(k[middle].id)<0) { left=middle-1; } else { right=middle+1; } } break; case '3': exit(0); break; } cout<<"Enter 1 to display , 2 to search , 3 to exit:"; cin>>z; } return 0; } the program reads from a file example.txt 313121crewwe matt 0114323111A # 433444cristinaee john 0113344325A+# 324311matte richee 3040554032B # the idea is to read fixed size field structure with a text seprator record strucutre

  Read the article

• Ubuntu server has slow performance

  - by Rich

  I have a custom built Ubuntu 11.04 server with a 6 disk software RAID 10 primary drive. On it I'm primarily running a PostgreSQL and a few other utilities that stream data from the web. I often find after a few hours of uptime the server starts to lag with all kinds of processes. For example, it may take 10-15 seconds after log-in to get a shell prompt. It might take 5-10 seconds for top to come up. An ls might take a second or two. When I look at top there is almost no CPU usage. There's a fair amount of memory used by the PostgreSQL server but not enough to bleed into swap. I have no idea where to go from here, other than to suspect the RAID10 (I've only ever had software RAID 1's before). Edit: Output from top: top - 11:56:03 up 1:46, 3 users, load average: 0.89, 0.73, 0.72 Tasks: 119 total, 1 running, 118 sleeping, 0 stopped, 0 zombie Cpu(s): 0.2%us, 0.0%sy, 0.0%ni, 93.5%id, 6.2%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 16325596k total, 3478248k used, 12847348k free, 20880k buffers Swap: 19534176k total, 0k used, 19534176k free, 3041992k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1747 woodsp 20 0 109m 10m 4888 S 1 0.1 0:42.70 python 357 root 20 0 0 0 0 S 0 0.0 0:00.40 jbd2/sda3-8 1 root 20 0 24324 2284 1344 S 0 0.0 0:00.84 init 2 root 20 0 0 0 0 S 0 0.0 0:00.00 kthreadd 3 root 20 0 0 0 0 S 0 0.0 0:00.24 ksoftirqd/0 6 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/0 7 root RT 0 0 0 0 S 0 0.0 0:00.01 watchdog/0 8 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/1 10 root 20 0 0 0 0 S 0 0.0 0:00.02 ksoftirqd/1 12 root RT 0 0 0 0 S 0 0.0 0:00.01 watchdog/1 13 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/2 14 root 20 0 0 0 0 S 0 0.0 0:00.00 kworker/2:0 15 root 20 0 0 0 0 S 0 0.0 0:00.00 ksoftirqd/2 16 root RT 0 0 0 0 S 0 0.0 0:00.01 watchdog/2 17 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/3 18 root 20 0 0 0 0 S 0 0.0 0:00.00 kworker/3:0 19 root 20 0 0 0 0 S 0 0.0 0:00.02 ksoftirqd/3 20 root RT 0 0 0 0 S 0 0.0 0:00.01 watchdog/3 21 root 0 -20 0 0 0 S 0 0.0 0:00.00 cpuset 22 root 0 -20 0 0 0 S 0 0.0 0:00.00 khelper 23 root 20 0 0 0 0 S 0 0.0 0:00.00 kdevtmpfs 24 root 0 -20 0 0 0 S 0 0.0 0:00.00 netns 26 root 20 0 0 0 0 S 0 0.0 0:00.00 sync_supers df -h rpsharp@ncp-skookum:~$ df -h Filesystem Size Used Avail Use% Mounted on /dev/sda3 1.8T 549G 1.2T 32% / udev 7.8G 4.0K 7.8G 1% /dev tmpfs 3.2G 492K 3.2G 1% /run none 5.0M 0 5.0M 0% /run/lock none 7.8G 0 7.8G 0% /run/shm /dev/sda2 952M 128K 952M 1% /boot/efi /dev/md0 5.5T 562G 4.7T 11% /usr/local free -m psharp@ncp-skookum:~$ free -m total used free shared buffers cached Mem: 15942 3409 12533 0 20 2983 -/+ buffers/cache: 405 15537 Swap: 19076 0 19076 tail -50 /var/log/syslog Jul 3 06:31:32 ncp-skookum rsyslogd: [origin software="rsyslogd" swVersion="5.8.6" x-pid="1070" x-info="http://www.rsyslog.com"] rsyslogd was HUPed Jul 3 06:39:01 ncp-skookum CRON[14211]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete) Jul 3 06:40:01 ncp-skookum CRON[14223]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Jul 3 07:00:01 ncp-skookum CRON[14328]: (woodsp) CMD (/home/woodsp/bin/mail_tweetupdate # email an update) Jul 3 07:00:01 ncp-skookum CRON[14327]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Jul 3 07:00:28 ncp-skookum sendmail[14356]: q63E0SoZ014356: from=woodsp, size=2328, class=0, nrcpts=2, msgid=<[email protected]>, relay=woodsp@localhost Jul 3 07:00:29 ncp-skookum sm-mta[14357]: q63E0Si6014357: from=<[email protected]>, size=2569, class=0, nrcpts=2, msgid=<[email protected]>, proto=ESMTP, daemon=MTA-v4, relay=localhost [127.0.0.1] Jul 3 07:00:29 ncp-skookum sendmail[14356]: q63E0SoZ014356: to=Spencer Wood <[email protected]>,Martin Lacayo <[email protected]>, ctladdr=woodsp (1004/1005), delay=00:00:01, xdelay=00:00:01, mailer=relay, pri=62328, relay=[127.0.0.1] [127.0.0.1], dsn=2.0.0, stat=Sent (q63E0Si6014357 Message accepted for delivery) Jul 3 07:00:29 ncp-skookum sm-mta[14359]: STARTTLS=client, relay=mx3.stanford.edu., version=TLSv1/SSLv3, verify=FAIL, cipher=DHE-RSA-AES256-SHA, bits=256/256 Jul 3 07:00:29 ncp-skookum sm-mta[14359]: q63E0Si6014357: to=<[email protected]>,<[email protected]>, ctladdr=<[email protected]> (1004/1005), delay=00:00:01, xdelay=00:00:00, mailer=esmtp, pri=152569, relay=mx3.stanford.edu. [171.67.219.73], dsn=2.0.0, stat=Sent (Ok: queued as 8F3505802AC) Jul 3 07:09:08 ncp-skookum CRON[14396]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete) Jul 3 07:17:01 ncp-skookum CRON[14438]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Jul 3 07:20:01 ncp-skookum CRON[14453]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Jul 3 07:39:01 ncp-skookum CRON[14551]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete) Jul 3 07:40:01 ncp-skookum CRON[14562]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Jul 3 08:00:01 ncp-skookum CRON[14668]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Jul 3 08:09:01 ncp-skookum CRON[14724]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete) Jul 3 08:17:01 ncp-skookum CRON[14766]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Jul 3 08:20:01 ncp-skookum CRON[14781]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Jul 3 08:39:01 ncp-skookum CRON[14881]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete) Jul 3 08:40:01 ncp-skookum CRON[14892]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Output of hdparm -t /dev/sd{a,b,c,d,e,f} This looks suspicious? /dev/sda: Timing buffered disk reads: 2 MB in 4.84 seconds = 423.39 kB/sec /dev/sdb: Timing buffered disk reads: 420 MB in 3.01 seconds = 139.74 MB/sec /dev/sdc: Timing buffered disk reads: 390 MB in 3.00 seconds = 129.87 MB/sec /dev/sdd: Timing buffered disk reads: 416 MB in 3.00 seconds = 138.51 MB/sec /dev/sde: Timing buffered disk reads: 422 MB in 3.00 seconds = 140.50 MB/sec /dev/sdf: Timing buffered disk reads: 416 MB in 3.01 seconds = 138.26 MB/sec

  Read the article

• 2-Bay External HDD Enclosure in JBOD mode fails to detect both drives (Linux & Windows)

  - by mgc8888

  I recently purchased a couple of USB 3.0 External HDD Enclosures to use for storage and backup; the idea was to have one act as backup to the other, with 4 x 3TB drives in total. However, the second drive in each is not accessible in either Linux nor Windows, and I could not determine the reason. 1. Situation The two enclosures are slightly different (couldn't find them in stock at the same time) yet from many little details appear to be the same Chinese base design with a tweaked outer shell. The models are: Sharkoon 2-Bay RAID Box Fantec MR-35DU3 The drives are Seagate 3TB Barracuda ST33000651AS, firmware CC44, all identical. From reading manuals and online sources, I determined that JBOD would be the optimal setup for my needs -- addressing the two drives separately in each enclosure would be important, making it easy to swap drives and mix&match them if needed; all the other modes implied the controller doing a combination of the drives. The software used was Debian GNU/Linux - testing/wheezy - kernel 2.6.39-2 and Windows 7 Ultimate. 2. Description of the problem Now, here comes the problem: every time I connect either of the enclosures to a PC using the supplied cable (tried a different one as well), only the HDD in the top bay is readable, the one below is detected yet errors out in various ways. According to the manuals, it should not happen: in JBOD, the system should be able to "see" two separate drives upon connection. This happens with both enclosures and any combination of HDDs (i.e. if I swap them, the same thing happens), so the HDDs are good and I think so are the enclosures (two different companies making similar products that failed in an identical fashion would be very unlikely). The top HDD can be used fine every time, I actually tried a speed test from Linux and got about 150MiB/s reads, so all is working as it should; the one below refuses to work every time. So the failure is consistent. To make sure this was not some obscure Linux bug, I tried the same under Windows 7, and the system also only created one drive letter for a drive of 3TB size (so it was only seeing one instead of both). Placing an older, known good, 2TB drive in the top bay made that the one recognised, so we have the same issue under Windows as well. Log entries under Linux (tested here with a 3TB and a 2TB drive so I could differentiate them; either one works in the top enclosure, in the test setup the 3TB one is on top). You can see them being detected, the top one is ok, but for the bottom one only errors: Jul 19 23:28:15 media kernel: [260150.582436] usb 6-1: New USB device found, idVendor=1ca1, idProduct=18ae Jul 19 23:28:15 media kernel: [260150.582440] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Jul 19 23:28:15 media kernel: [260150.582442] usb 6-1: Product: Usb Sata Bridge Jul 19 23:28:15 media kernel: [260150.582444] usb 6-1: Manufacturer: SYMWAVE Jul 19 23:28:15 media kernel: [260150.582446] usb 6-1: SerialNumber: 39584B304C4E3441 Jul 19 23:28:15 media kernel: [260150.870412] scsi11 : usb-storage 6-1:1.0 Jul 19 23:28:16 media kernel: [260151.882087] scsi 11:0:0:0: Direct-Access SYMWAVE ST33000651AS CC44 PQ: 0 ANSI: 4 Jul 19 23:28:16 media kernel: [260151.882242] scsi 11:0:0:1: Direct-Access SYMWAVE ST32000641AS CC12 PQ: 0 ANSI: 4 Jul 19 23:28:16 media kernel: [260151.882677] sd 11:0:0:0: Attached scsi generic sg2 type 0 Jul 19 23:28:16 media kernel: [260151.882774] sd 11:0:0:0: [sdb] Very big device. Trying to use READ CAPACITY(16). Jul 19 23:28:16 media kernel: [260151.882857] sd 11:0:0:1: Attached scsi generic sg3 type 0 Jul 19 23:28:16 media kernel: [260151.882893] sd 11:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) Jul 19 23:28:16 media kernel: [260151.883085] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint Jul 19 23:28:16 media kernel: [260151.883582] sd 11:0:0:0: [sdb] Write Protect is off Jul 19 23:28:16 media kernel: [260151.883961] sd 11:0:0:1: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) Jul 19 23:28:16 media kernel: [260151.884145] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint Jul 19 23:28:16 media kernel: [260151.884570] sd 11:0:0:1: [sdc] Write Protect is off Jul 19 23:28:16 media kernel: [260151.884855] sd 11:0:0:0: [sdb] Very big device. Trying to use READ CAPACITY(16). Jul 19 23:28:16 media kernel: [260151.885286] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint Jul 19 23:28:16 media kernel: [260151.885807] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint Jul 19 23:28:16 media kernel: [260151.909595] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint Jul 19 23:28:16 media kernel: [260151.910159] sd 11:0:0:1: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Jul 19 23:28:16 media kernel: [260151.910163] sd 11:0:0:1: [sdc] Sense Key : Illegal Request [current] Jul 19 23:28:16 media kernel: [260151.910167] Info fld=0x0 Jul 19 23:28:16 media kernel: [260151.910169] sd 11:0:0:1: [sdc] Add. Sense: Invalid field in cdb Jul 19 23:28:16 media kernel: [260151.910172] sd 11:0:0:1: [sdc] CDB: Read(10): 28 20 00 00 00 00 00 00 08 00 Jul 19 23:28:16 media kernel: [260151.910182] quiet_error: 2 callbacks suppressed Jul 19 23:28:16 media kernel: [260151.910570] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint Jul 19 23:28:16 media kernel: [260151.911153] sd 11:0:0:1: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Jul 19 23:28:16 media kernel: [260151.911156] sd 11:0:0:1: [sdc] Sense Key : Illegal Request [current] Jul 19 23:28:16 media kernel: [260151.911159] Info fld=0x0 Jul 19 23:28:16 media kernel: [260151.911161] sd 11:0:0:1: [sdc] Add. Sense: Invalid field in cdb Jul 19 23:28:16 media kernel: [260151.911164] sd 11:0:0:1: [sdc] CDB: Read(10): 28 20 00 00 00 00 00 00 08 00 Jul 19 23:28:16 media kernel: [260151.911385] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint Jul 19 23:28:16 media kernel: [260151.911902] sd 11:0:0:1: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Jul 19 23:28:16 media kernel: [260151.911905] sd 11:0:0:1: [sdc] Sense Key : Illegal Request [current] Jul 19 23:28:16 media kernel: [260151.911908] Info fld=0x0 Jul 19 23:28:16 media kernel: [260151.911910] sd 11:0:0:1: [sdc] Add. Sense: Invalid field in cdb Jul 19 23:28:16 media kernel: [260151.911913] sd 11:0:0:1: [sdc] CDB: Read(10): 28 20 00 00 00 00 00 00 08 00 Jul 19 23:28:16 media kernel: [260151.912128] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint Jul 19 23:28:16 media kernel: [260151.912650] sd 11:0:0:1: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Jul 19 23:28:16 media kernel: [260151.912653] sd 11:0:0:1: [sdc] Sense Key : Illegal Request [current] Jul 19 23:28:16 media kernel: [260151.912656] Info fld=0x0 Jul 19 23:28:16 media kernel: [260151.912657] sd 11:0:0:1: [sdc] Add. Sense: Invalid field in cdb Jul 19 23:28:16 media kernel: [260151.912660] sd 11:0:0:1: [sdc] CDB: Read(10): 28 20 00 00 00 00 00 00 08 00 Jul 19 23:28:16 media kernel: [260151.912876] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint Jul 19 23:28:16 media kernel: [260151.913439] sd 11:0:0:1: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Jul 19 23:28:16 media kernel: [260151.913442] sd 11:0:0:1: [sdc] Sense Key : Illegal Request [current] Jul 19 23:28:16 media kernel: [260151.913445] Info fld=0x0 Jul 19 23:28:16 media kernel: [260151.913446] sd 11:0:0:1: [sdc] Add. Sense: Invalid field in cdb Jul 19 23:28:16 media kernel: [260151.913449] sd 11:0:0:1: [sdc] CDB: Read(10): 28 20 00 00 00 00 00 00 08 00 Jul 19 23:28:16 media kernel: [260151.945227] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint Jul 19 23:28:16 media kernel: [260151.945863] sd 11:0:0:1: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Jul 19 23:28:16 media kernel: [260151.945866] sd 11:0:0:1: [sdc] Sense Key : Illegal Request [current] Jul 19 23:28:16 media kernel: [260151.945870] Info fld=0x0 Jul 19 23:28:16 media kernel: [260151.945871] sd 11:0:0:1: [sdc] Add. Sense: Invalid field in cdb Jul 19 23:28:16 media kernel: [260151.945875] sd 11:0:0:1: [sdc] CDB: Read(10): 28 20 00 00 00 00 00 00 08 00 (...) and so on for like 10 seconds until it gives up (...) 3. Question So, my question would be: what is causing this? Am I missing something, should I configure things differently, is this a known limitation? Searching online for more information did not yield any useful results... Thank you in advance for any help!

  Read the article

• Too many connections to 212.192.255.240

  - by Castor

  Recently, my Internet slowed down drastically. I downloaded a tool to see the TCP/IP connections from my Vista computer. I found out that a lot TCP/IP connections are being connected to 212.192.255.240 through SVCHost. It seems that it is trying to connect to different ports. I think that my computer is being infected with some kind of malware etc. But I am not sure how to get rid of it. I did a little bit of research on this IP but found nothing. Any suggestions are highly appreciated. UPDATE: This is the HiJackThis log file and I can't find any thing weird. Also, the program is also trying to create connections to 91.205.127.63, which is also from Russia. Logfile of Trend Micro HijackThis v2.0.4 Scan saved at 18:20:54 PM, on 4/29/2010 Platform: Windows Vista SP2 (WinNT 6.00.1906) MSIE: Internet Explorer v8.00 (8.00.6001.18882) Boot mode: Normal Running processes: C:\Windows\SYSTEM32\taskeng.exe C:\Windows\system32\Dwm.exe C:\Windows\SYSTEM32\Taskmgr.exe C:\Windows\explorer.exe C:\Windows\System32\igfxpers.exe C:\Program Files\Alwil Software\Avast4\ashDisp.exe C:\Program Files\Software602\Print2PDF\Print2PDF.exe C:\Windows\system32\igfxsrvc.exe C:\Program Files\VertrigoServ\Vertrigo.exe C:\Program Files\Java\jre6\bin\jusched.exe C:\Program Files\Google\GoogleToolbarNotifier\GoogleToolbarNotifier.exe C:\Windows\system32\wbem\unsecapp.exe C:\Program Files\Windows Media Player\wmpnscfg.exe C:\Program Files\X-NetStat Professional\xns5.exe C:\Program Files\Mozilla Firefox\firefox.exe C:\Program Files\HP\Digital Imaging\smart web printing\hpswp_clipbook.exe C:\Windows\system32\cmd.exe C:\Program Files\Trend Micro\HiJackThis\HiJackThis.exe R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = about:blank R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Search_URL = http://go.microsoft.com/fwlink/?LinkId=54896 R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Search Page = http://go.microsoft.com/fwlink/?LinkId=54896 R0 - HKLM\Software\Microsoft\Internet Explorer\Search,CustomizeSearch = R1 - HKCU\Software\Microsoft\Windows\CurrentVersion\Internet Settings,ProxyServer = 10.0.0.30:8118 R0 - HKCU\Software\Microsoft\Internet Explorer\Toolbar,LinksFolderName = R3 - URLSearchHook: Yahoo! Toolbar - {EF99BD32-C1FB-11D2-892F-0090271D4F88} - C:\Program Files\Yahoo!\Companion\Installs\cpn0\yt.dll F2 - REG:system.ini: Shell=explorer.exe rundll32.exe O2 - BHO: &Yahoo! Toolbar Helper - {02478D38-C3F9-4efb-9B51-7695ECA05670} - C:\Program Files\Yahoo!\Companion\Installs\cpn0\yt.dll O2 - BHO: HP Print Enhancer - {0347C33E-8762-4905-BF09-768834316C61} - C:\Program Files\HP\Digital Imaging\Smart Web Printing\hpswp_printenhancer.dll O2 - BHO: AcroIEHelperStub - {18DF081C-E8AD-4283-A596-FA578C2EBDC3} - C:\Program Files\Common Files\Adobe\Acrobat\ActiveX\AcroIEHelperShim.dll O2 - BHO: RoboForm BHO - {724d43a9-0d85-11d4-9908-00400523e39a} - C:\Program Files\Siber Systems\AI RoboForm\roboform.dll O2 - BHO: Groove GFS Browser Helper - {72853161-30C5-4D22-B7F9-0BBC1D38A37E} - C:\PROGRA~1\MICROS~3\Office12\GRA8E1~1.DLL O2 - BHO: Google Toolbar Helper - {AA58ED58-01DD-4d91-8333-CF10577473F7} - C:\Program Files\Google\Google Toolbar\GoogleToolbar_32.dll O2 - BHO: Google Toolbar Notifier BHO - {AF69DE43-7D58-4638-B6FA-CE66B5AD205D} - C:\Program Files\Google\GoogleToolbarNotifier\5.5.4723.1820\swg.dll O2 - BHO: Java(tm) Plug-In 2 SSV Helper - {DBC80044-A445-435b-BC74-9C25C1C588A9} - C:\Program Files\Java\jre6\bin\jp2ssv.dll O2 - BHO: Google Gears Helper - {E0FEFE40-FBF9-42AE-BA58-794CA7E3FB53} - C:\Program Files\Google\Google Gears\Internet Explorer\0.5.36.0\gears.dll O2 - BHO: SingleInstance Class - {FDAD4DA1-61A2-4FD8-9C17-86F7AC245081} - C:\Program Files\Yahoo!\Companion\Installs\cpn0\YTSingleInstance.dll O2 - BHO: HP Smart BHO Class - {FFFFFFFF-CF4E-4F2B-BDC2-0E72E116A856} - C:\Program Files\HP\Digital Imaging\Smart Web Printing\hpswp_BHO.dll O3 - Toolbar: Yahoo! Toolbar - {EF99BD32-C1FB-11D2-892F-0090271D4F88} - C:\Program Files\Yahoo!\Companion\Installs\cpn0\yt.dll O3 - Toolbar: &RoboForm - {724d43a0-0d85-11d4-9908-00400523e39a} - C:\Program Files\Siber Systems\AI RoboForm\roboform.dll O3 - Toolbar: Google Toolbar - {2318C2B1-4965-11d4-9B18-009027A5CD4F} - C:\Program Files\Google\Google Toolbar\GoogleToolbar_32.dll O4 - HKLM\..\Run: [RtHDVCpl] C:\Program Files\Realtek\Audio\HDA\RtHDVCpl.exe -s O4 - HKLM\..\Run: [IgfxTray] C:\Windows\system32\igfxtray.exe O4 - HKLM\..\Run: [Persistence] C:\Windows\system32\igfxpers.exe O4 - HKLM\..\Run: [avast!] C:\PROGRA~1\ALWILS~1\Avast4\ashDisp.exe O4 - HKLM\..\Run: [Print2PDF Print Monitor] "C:\Program Files\Software602\Print2PDF\Print2PDF.exe" /server O4 - HKLM\..\Run: [VertrigoServ] "C:\Program Files\VertrigoServ\Vertrigo.exe" O4 - HKLM\..\Run: [SunJavaUpdateSched] "C:\Program Files\Java\jre6\bin\jusched.exe" O4 - HKLM\..\Run: [Adobe Reader Speed Launcher] "C:\Program Files\Adobe\Reader 9.0\Reader\Reader_sl.exe" O4 - HKLM\..\Run: [Adobe ARM] "C:\Program Files\Common Files\Adobe\ARM\1.0\AdobeARM.exe" O4 - HKLM\..\Run: [Google Quick Search Box] "C:\Program Files\Google\Quick Search Box\GoogleQuickSearchBox.exe" /autorun O4 - HKLM\..\Run: [iTunesHelper] "C:\Program Files\iTunes\iTunesHelper.exe" O4 - HKLM\..\Run: [QuickTime Task] "C:\Program Files\QuickTime\QTTask.exe" -atboottime O4 - HKCU\..\Run: [swg] "C:\Program Files\Google\GoogleToolbarNotifier\GoogleToolbarNotifier.exe" O4 - HKCU\..\Run: [CCProxy] C:\CCProxy\CCProxy.exe O4 - HKCU\..\Run: [AlcoholAutomount] "C:\Program Files\Alcohol Soft\Alcohol 120\axcmd.exe" /automount O4 - HKCU\..\Run: [RoboForm] "C:\Program Files\Siber Systems\AI RoboForm\RoboTaskBarIcon.exe" O4 - HKCU\..\Run: [FileHippo.com] "C:\Program Files\filehippo.com\UpdateChecker.exe" /background O4 - HKUS\S-1-5-19\..\Run: [Sidebar] %ProgramFiles%\Windows Sidebar\Sidebar.exe /detectMem (User 'LOCAL SERVICE') O4 - HKUS\S-1-5-19\..\Run: [WindowsWelcomeCenter] rundll32.exe oobefldr.dll,ShowWelcomeCenter (User 'LOCAL SERVICE') O4 - HKUS\S-1-5-20\..\Run: [Sidebar] %ProgramFiles%\Windows Sidebar\Sidebar.exe /detectMem (User 'NETWORK SERVICE') O4 - Startup: AutorunsDisabled O4 - Startup: Locate32 Autorun.lnk = C:\Program Files\Locate\Locate32.exe O4 - Startup: OneNote Table Of Contents.onetoc2 O8 - Extra context menu item: Add to Google Photos Screensa&ver - res://C:\Windows\system32\GPhotos.scr/200 O8 - Extra context menu item: Customize Menu - file://C:\Program Files\Siber Systems\AI RoboForm\RoboFormComCustomizeIEMenu.html O8 - Extra context menu item: E&xport to Microsoft Excel - res://C:\PROGRA~1\MICROS~3\Office14\EXCEL.EXE/3000 O8 - Extra context menu item: Fill Forms - file://C:\Program Files\Siber Systems\AI RoboForm\RoboFormComFillForms.html O8 - Extra context menu item: Google Sidewiki... - res://C:\Program Files\Google\Google Toolbar\Component\GoogleToolbarDynamic_mui_en_96D6FF0C6D236BF8.dll/cmsidewiki.html O8 - Extra context menu item: RoboForm Toolbar - file://C:\Program Files\Siber Systems\AI RoboForm\RoboFormComShowToolbar.html O8 - Extra context menu item: S&end to OneNote - res://C:\PROGRA~1\MICROS~3\Office14\ONBttnIE.dll/105 O8 - Extra context menu item: Save Forms - file://C:\Program Files\Siber Systems\AI RoboForm\RoboFormComSavePass.html O9 - Extra button: (no name) - {09C04DA7-5B76-4EBC-BBEE-B25EAC5965F5} - C:\Program Files\Google\Google Gears\Internet Explorer\0.5.36.0\gears.dll O9 - Extra 'Tools' menuitem: &Gears Settings - {09C04DA7-5B76-4EBC-BBEE-B25EAC5965F5} - C:\Program Files\Google\Google Gears\Internet Explorer\0.5.36.0\gears.dll O9 - Extra button: Send to OneNote - {2670000A-7350-4f3c-8081-5663EE0C6C49} - C:\PROGRA~1\MICROS~3\Office12\ONBttnIE.dll O9 - Extra 'Tools' menuitem: S&end to OneNote - {2670000A-7350-4f3c-8081-5663EE0C6C49} - C:\PROGRA~1\MICROS~3\Office12\ONBttnIE.dll O9 - Extra button: Fill Forms - {320AF880-6646-11D3-ABEE-C5DBF3571F46} - file://C:\Program Files\Siber Systems\AI RoboForm\RoboFormComFillForms.html O9 - Extra 'Tools' menuitem: Fill Forms - {320AF880-6646-11D3-ABEE-C5DBF3571F46} - file://C:\Program Files\Siber Systems\AI RoboForm\RoboFormComFillForms.html O9 - Extra button: Save - {320AF880-6646-11D3-ABEE-C5DBF3571F49} - file://C:\Program Files\Siber Systems\AI RoboForm\RoboFormComSavePass.html O9 - Extra 'Tools' menuitem: Save Forms - {320AF880-6646-11D3-ABEE-C5DBF3571F49} - file://C:\Program Files\Siber Systems\AI RoboForm\RoboFormComSavePass.html O9 - Extra button: Print2PDF - {5B7027AD-AA6D-40df-8F56-9560F277D2A5} - C:\Program Files\Software602\Print2PDF\Print602.dll O9 - Extra 'Tools' menuitem: Print2PDF - {5B7027AD-AA6D-40df-8F56-9560F277D2A5} - C:\Program Files\Software602\Print2PDF\Print602.dll O9 - Extra button: RoboForm - {724d43aa-0d85-11d4-9908-00400523e39a} - file://C:\Program Files\Siber Systems\AI RoboForm\RoboFormComShowToolbar.html O9 - Extra 'Tools' menuitem: RoboForm Toolbar - {724d43aa-0d85-11d4-9908-00400523e39a} - file://C:\Program Files\Siber Systems\AI RoboForm\RoboFormComShowToolbar.html O9 - Extra button: Research - {92780B25-18CC-41C8-B9BE-3C9C571A8263} - C:\PROGRA~1\MICROS~3\Office12\REFIEBAR.DLL O9 - Extra button: Show or hide HP Smart Web Printing - {DDE87865-83C5-48c4-8357-2F5B1AA84522} - C:\Program Files\HP\Digital Imaging\Smart Web Printing\hpswp_BHO.dll O17 - HKLM\System\CCS\Services\Tcpip\..\{A80AB385-7767-4B5C-AF97-DBD65B29D8D1}: NameServer = 218.248.255.146 218.248.255.212 O17 - HKLM\System\CCS\Services\Tcpip\..\{D10402C1-9CDE-4582-A6B7-6C0D33B0E7BC}: NameServer = 218.248.255.146,218.248.255.212 O18 - Protocol: grooveLocalGWS - {88FED34C-F0CA-4636-A375-3CB6248B04CD} - C:\PROGRA~1\MICROS~3\Office12\GR99D3~1.DLL O22 - SharedTaskScheduler: Component Categories cache daemon - {8C7461EF-2B13-11d2-BE35-3078302C2030} - C:\Windows\system32\browseui.dll O23 - Service: Apple Mobile Device - Apple Inc. - C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe O23 - Service: avast! iAVS4 Control Service (aswUpdSv) - ALWIL Software - C:\Program Files\Alwil Software\Avast4\aswUpdSv.exe O23 - Service: avast! Antivirus - ALWIL Software - C:\Program Files\Alwil Software\Avast4\ashServ.exe O23 - Service: avast! Mail Scanner - ALWIL Software - C:\Program Files\Alwil Software\Avast4\ashMaiSv.exe O23 - Service: avast! Web Scanner - ALWIL Software - C:\Program Files\Alwil Software\Avast4\ashWebSv.exe O23 - Service: Bonjour Service - Apple Inc. - C:\Program Files\Bonjour\mDNSResponder.exe O23 - Service: CCProxy - Youngzsoft - C:\CCProxy\CCProxy.exe O23 - Service: Google Update Service (gupdate1c9c328490dac0) (gupdate1c9c328490dac0) - Google Inc. - C:\Program Files\Google\Update\GoogleUpdate.exe O23 - Service: Google Software Updater (gusvc) - Google - C:\Program Files\Google\Common\Google Updater\GoogleUpdaterService.exe O23 - Service: Distributed Transaction Coordinator MSDTCwercplsupport (MSDTCwercplsupport) - Unknown owner - C:\Windows\system32\acluiz.exe O23 - Service: Realtek Audio Service (RtkAudioService) - Realtek Semiconductor - C:\Windows\RtkAudioService.exe O23 - Service: StarWind AE Service (StarWindServiceAE) - Rocket Division Software - C:\Program Files\Alcohol Soft\Alcohol 120\StarWind\StarWindServiceAE.exe O23 - Service: SuperProServer - Unknown owner - C:\Windows\spnsrvnt.exe (file missing) O23 - Service: Vertrigo_Apache - Apache Software Foundation - C:\Program Files\VertrigoServ\apache\bin\v_apache.exe O23 - Service: Vertrigo_MySQL - Unknown owner - C:\Program Files\VertrigoServ\mysql\bin\v_mysqld.exe -- End of file - 10965 bytes enter code here enter code here

  Read the article

• Varnish "FetchError no backend connection" error

  - by clueless-anon

  Varnishlog: 0 CLI - Rd ping 0 CLI - Wr 200 19 PONG 1340829925 1.0 12 SessionOpen c 79.124.74.11 3063 :80 12 SessionClose c EOF 12 StatSess c 79.124.74.11 3063 0 1 0 0 0 0 0 0 0 CLI - Rd ping 0 CLI - Wr 200 19 PONG 1340829928 1.0 0 CLI - Rd ping 0 CLI - Wr 200 19 PONG 1340829931 1.0 12 SessionOpen c 108.62.115.226 46211 :80 12 ReqStart c 108.62.115.226 46211 467185881 12 RxRequest c GET 12 RxURL c / 12 RxProtocol c HTTP/1.0 12 RxHeader c User-Agent: Pingdom.com_bot_version_1.4_(http://www.pingdom.com/) 12 RxHeader c Host: www.mysite.com 12 VCL_call c recv lookup 12 VCL_call c hash 12 Hash c / 12 Hash c www.mysite.com 12 VCL_return c hash 12 VCL_call c miss fetch 12 FetchError c no backend connection 12 VCL_call c error deliver 12 VCL_call c deliver deliver 12 TxProtocol c HTTP/1.1 12 TxStatus c 503 12 TxResponse c Service Unavailable 12 TxHeader c Server: Varnish 12 TxHeader c Content-Type: text/html; charset=utf-8 12 TxHeader c Retry-After: 5 12 TxHeader c Content-Length: 418 12 TxHeader c Accept-Ranges: bytes 12 TxHeader c Date: Wed, 27 Jun 2012 20:45:31 GMT 12 TxHeader c X-Varnish: 467185881 12 TxHeader c Age: 1 12 TxHeader c Via: 1.1 varnish 12 TxHeader c Connection: close 12 Length c 418 12 ReqEnd c 467185881 1340829931.192433119 1340829931.891024113 0.000051022 0.698516846 0.000074035 12 SessionClose c error 12 StatSess c 108.62.115.226 46211 1 1 1 0 0 0 256 418 0 CLI - Rd ping 0 CLI - Wr 200 19 PONG 1340829934 1.0 0 CLI - Rd ping 0 CLI - Wr 200 19 PONG 1340829937 1.0 netstat -tlnp Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 0.0.0.0:8080 0.0.0.0:* LISTEN 3086/nginx tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 1915/varnishd tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 1279/sshd tcp 0 0 127.0.0.2:25 0.0.0.0:* LISTEN 3195/sendmail: MTA: tcp 0 0 127.0.0.2:6082 0.0.0.0:* LISTEN 1914/varnishd tcp 0 0 127.0.0.2:9000 0.0.0.0:* LISTEN 1317/php-fpm.conf) tcp 0 0 127.0.0.2:3306 0.0.0.0:* LISTEN 1192/mysqld tcp 0 0 127.0.0.2:587 0.0.0.0:* LISTEN 3195/sendmail: MTA: tcp 0 0 127.0.0.2:11211 0.0.0.0:* LISTEN 3072/memcached tcp6 0 0 :::8080 :::* LISTEN 3086/nginx tcp6 0 0 :::80 :::* LISTEN 1915/varnishd tcp6 0 0 :::22 :::* LISTEN 1279/sshd /etc/nginx/site-enabled/default server { listen 8080; ## listen for ipv4; this line is default and implied listen [::]:8080 default ipv6only=on; ## listen for ipv6 root /usr/share/nginx/www; index index.html index.htm index.php; # Make site accessible from http://localhost/ server_name localhost; location / { # First attempt to serve request as file, then # as directory, then fall back to index.html try_files $uri $uri/ /index.html; } location /doc { root /usr/share; autoindex on; allow 127.0.0.2; deny all; } location /images { root /usr/share; autoindex off; } #error_page 404 /404.html; # redirect server error pages to the static page /50x.html # #error_page 500 502 503 504 /50x.html; #location = /50x.html { # root /usr/share/nginx/www; #} # proxy the PHP scripts to Apache listening on 127.0.0.1:80 # #location ~ \.php$ { # proxy_pass http://127.0.0.1; #} # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 # location ~ \.php$ { fastcgi_pass 127.0.0.2:9000; fastcgi_index index.php; include fastcgi_params; } # deny access to .htaccess files, if Apache's document root # concurs with nginx's one # #location ~ /\.ht { # deny all; #} } /etc/nginx/sites-enabled/www.mysite.com.vhost server { listen 8080; server_name www.mysite.com mysite.com.net; root /var/www/www.mysite.com/web; if ($http_host != "www.mysite.com") { rewrite ^ http://www.mysite.com$request_uri permanent; } index index.php index.html; location = /favicon.ico { log_not_found off; access_log off; } location = /robots.txt { allow all; log_not_found off; access_log off; } # Deny all attempts to access hidden files such as .htaccess, .htpasswd, .DS_Store (Mac). location ~ /\. { deny all; access_log off; log_not_found off; } location / { try_files $uri $uri/ /index.php?$args; } # Add trailing slash to */wp-admin requests. rewrite /wp-admin$ $scheme://$host$uri/ permanent; location ~* \.(jpg|jpeg|png|gif|css|js|ico)$ { expires max; log_not_found off; } location ~ \.php$ { try_files $uri =404; include /etc/nginx/fastcgi_params; fastcgi_pass 127.0.0.2:9000; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; } include /var/www/www.mysite.com/web/nginx.conf; location ~ /nginx.conf { deny all; access_log off; log_not_found off; } } /etc/varnish/default.vcl # This is a basic VCL configuration file for varnish. See the vcl(7) # man page for details on VCL syntax and semantics. # # Default backend definition. Set this to point to your content # server. # backend default { .host = "127.0.0.2"; .port = "8080"; # .connect_timeout = 600s; #.first_byte_timeout = 600s; # .between_bytes_timeout = 600s; # .max_connections = 800; Note: uncommenting the last four options at default.vcl made no difference. cat /etc/default/varnish # Configuration file for varnish # # /etc/init.d/varnish expects the variables $DAEMON_OPTS, $NFILES and $MEMLOCK # to be set from this shell script fragment. # # Should we start varnishd at boot? Set to "yes" to enable. START=yes # Maximum number of open files (for ulimit -n) NFILES=131072 # Maximum locked memory size (for ulimit -l) # Used for locking the shared memory log in memory. If you increase log size, # you need to increase this number as well MEMLOCK=82000 # Default varnish instance name is the local nodename. Can be overridden with # the -n switch, to have more instances on a single server. INSTANCE=$(uname -n) # This file contains 4 alternatives, please use only one. ## Alternative 1, Minimal configuration, no VCL # # Listen on port 6081, administration on localhost:6082, and forward to # content server on localhost:8080. Use a 1GB fixed-size cache file. # # DAEMON_OPTS="-a :6081 \ # -T localhost:6082 \ # -b localhost:8080 \ # -u varnish -g varnish \ # -S /etc/varnish/secret \ # -s file,/var/lib/varnish/$INSTANCE/varnish_storage.bin,1G" ## Alternative 2, Configuration with VCL # # Listen on port 6081, administration on localhost:6082, and forward to # one content server selected by the vcl file, based on the request. Use a 1GB # fixed-size cache file. # DAEMON_OPTS="-a :80 \ -T 127.0.0.2:6082 \ -f /etc/varnish/default.vcl \ -S /etc/varnish/secret \ -s file,/var/lib/varnish/$INSTANCE/varnish_storage.bin,1G" If you need any other info let me know. I am all out of clue as to whats the problem.

  Read the article

• Installing Oracle 11gR2 on RHEL 6.2

  - by Chris

  Hello all I'm having some difficulty installing Oracle 11gR2 on RHEL 6.2 I have compiled a giant list of every single step I have taken so far I installed RHEL 6.2 on VMWARE it did it's easy install automatically I Selected 4gb of memory Selected max size of 80Gb Selected 2 processors Sorry for the bad styling copy paste isn't working correctly The version of oracle i downloaded is Linux x86-64 11.2.0.1 I am installing this on a local machine NOT a remote machine I followed the following documentation http://docs.oracle.com/cd/E11882_01/install.112/e24326/toc.htm I bolded the steps which I was least sure about from my research Easy installed with RHEL 6.2 for VMWARE Registered with red hat so I can get updates Reinstalled vmware-tools by pressing enter at every choice Sudo yum update at the end something about GPG key selected y then y Checked Memory Requirements grep MemTotal /proc/meminfo MemTotal: 3921368 kb uname -m x86_64 grep SwapTotal /proc/meminfo SwapTotal: 6160376 kb free total used free shared buffers cached Mem: 3921368 2032012 1889356 0 76216 1533268 -/+ buffers/cache: 422528 3498840 Swap: 6160376 0 6160376 df -h /dev/shm Filesystem Size Used Avail Use% Mounted on tmpfs 1.9G 276K 1.9G 1% /dev/shm df -h /tmp Filesystem Size Used Avail Use% Mounted on /dev/sda2 73G 2.7G 67G 4% / df -h Filesystem Size Used Avail Use% Mounted on /dev/sda2 73G 2.7G 67G 4% / tmpfs 1.9G 276K 1.9G 1% /dev/shm /dev/sda1 291M 58M 219M 21% /boot All looked fine to me except maybe for swap? Software Requirements cat /proc/version Linux version 2.6.32-220.el6.x86_64 ([email protected]) (gcc version 4.4.5 20110214 (Red Hat 4.4.5-6) (GCC) ) #1 SMP Wed Nov 9 08:03:13 EST 2011 uname -r 2.6.32-220.el6.x86_64 (same as above but whatever) According to the tutorial should be On Red Hat Enterprise Linux 6 2.6.32-71.el6.x86_64 or later These are the versions of software I have installed binutils-2.20.51.0.2-5.28.el6.x86_64 compat-libcap1-1.10-1.x86_64 compat-libstdc++-33-3.2.3-69.el6.x86_64 compat-libstdc++-33.i686 0:3.2.3-69.el6 gcc-4.4.6-3.el6.x86_64 gcc-c++.x86_64 0:4.4.6-3.el6 glibc-2.12-1.47.el6_2.12.x86_64 glibc-2.12-1.47.el6_2.12.i686 glibc-devel-2.12-1.47.el6_2.12.x86_64 glibc-devel.i686 0:2.12-1.47.el6_2.12 ksh.x86_64 0:20100621-12.el6_2.1 libgcc-4.4.6-3.el6.x86_64 libgcc-4.4.6-3.el6.i686 libstdc++-4.4.6-3.el6.x86_64 libstdc++.i686 0:4.4.6-3.el6 libstdc++-devel.i686 0:4.4.6-3.el6 libstdc++-devel-4.4.6-3.el6.x86_64 libaio-0.3.107-10.el6.x86_64 libaio-0.3.107-10.el6.i686 libaio-devel-0.3.107-10.el6.x86_64 libaio-devel-0.3.107-10.el6.i686 make-3.81-19.el6.x86_64 sysstat-9.0.4-18.el6.x86_64 unixODBC-2.2.14-11.el6.x86_64 unixODBC-devel-2.2.14-11.el6.x86_64 unixODBC-devel-2.2.14-11.el6.i686 unixODBC-2.2.14-11.el6.i686 8. Probably screwed up here or step 9 /usr/sbin/groupadd oinstall /usr/sbin/groupadd dba(not sure why this isn't in the tutorial) /usr/sbin/useradd -g oinstall -G dba oracle passwd oracle /sbin/sysctl -a | grep sem Xkernel.sem = 250 32000 32 128 /sbin/sysctl -a | grep shm kernel.shmmax = 68719476736 kernel.shmall = 4294967296 kernel.shmmni = 4096 vm.hugetlb_shm_group = 0 /sbin/sysctl -a | grep file-max Xfs.file-max = 384629 /sbin/sysctl -a | grep ip_local_port_range Xnet.ipv4.ip_local_port_range = 32768 61000 /sbin/sysctl -a | grep rmem_default Xnet.core.rmem_default = 124928 /sbin/sysctl -a | grep rmem_max Xnet.core.rmem_max = 131071 /sbin/sysctl -a | grep wmem_max Xnet.core.wmem_max = 131071 /sbin/sysctl -a | grep wmem_default Xnet.core.wmem_default = 124928 Here is my sysctl.conf file I only added the items that were bigger: Kernel sysctl configuration file for Red Hat Linux # For binary values, 0 is disabled, 1 is enabled. See sysctl(8) and sysctl.conf(5) for more details. Controls IP packet forwarding net.ipv4.ip_forward = 0 Controls source route verification net.ipv4.conf.default.rp_filter = 1 Do not accept source routing net.ipv4.conf.default.accept_source_route = 0 Controls the System Request debugging functionality of the kernel kernel.sysrq = 0 Controls whether core dumps will append the PID to the core filename. Useful for debugging multi-threaded applications. kernel.core_uses_pid = 1 Controls the use of TCP syncookies net.ipv4.tcp_syncookies = 1 Disable netfilter on bridges. net.bridge.bridge-nf-call-ip6tables = 0 net.bridge.bridge-nf-call-iptables = 0 net.bridge.bridge-nf-call-arptables = 0 Controls the maximum size of a message, in bytes kernel.msgmnb = 65536 Controls the default maxmimum size of a mesage queue kernel.msgmax = 65536 Controls the maximum shared segment size, in bytes kernel.shmmax = 68719476736 Controls the maximum number of shared memory segments, in pages kernel.shmall = 4294967296 fs.aio-max-nr = 1048576 fs.file-max = 6815744 kernel.sem = 250 32000 100 128 net.ipv4.ip_local_port_range = 9000 65500 net.core.rmem_default = 262144 net.core.rmem_max = 4194304 net.core.wmem_default = 262144 net.core.wmem_max = 1048576 /sbin/sysctl -p net.ipv4.ip_forward = 0 net.ipv4.conf.default.rp_filter = 1 net.ipv4.conf.default.accept_source_route = 0 kernel.sysrq = 0 kernel.core_uses_pid = 1 net.ipv4.tcp_syncookies = 1 error: "net.bridge.bridge-nf-call-ip6tables" is an unknown key error: "net.bridge.bridge-nf-call-iptables" is an unknown key error: "net.bridge.bridge-nf-call-arptables" is an unknown key kernel.msgmnb = 65536 kernel.msgmax = 65536 kernel.shmmax = 68719476736 kernel.shmall = 4294967296 fs.aio-max-nr = 1048576 fs.file-max = 6815744 kernel.sem = 250 32000 100 128 net.ipv4.ip_local_port_range = 9000 65500 net.core.rmem_default = 262144 net.core.rmem_max = 4194304 net.core.wmem_default = 262144 net.core.wmem_max = 1048576 su - oracle ulimit -Sn 1024 ulimit -Hn 1024 ulimit -Su 1024 ulimit -Hu 30482 ulimit -Su 1024 ulimit -Ss 10240 ulimit -Hs unlimited su - nano /etc/security/limits.conf *added to the end of the file * oracle soft nproc 2047 oracle hard nproc 16384 oracle soft nofile 1024 oracle hard nofile 65536 oracle soft stack 10240 exit exit su - mkdir -p /app/ chown -R oracle:oinstall /app/ chmod -R 775 /app/ 9. THIS IS PROBABLY WHERE I MESSED UP I then exited out of the root account so now I'm back in my account chris then I su - oracle echo $SHELL /bin/bash umask 0022 (so it should be set already to what is neccesary) Also from what I have read I do not need to set the DISPLAY variable because I'm installing this on the localhost I then opened the .bash_profile of the oracle and changed it to the following .bash_profile Get the aliases and functions if [ -f ~/.bashrc ]; then . ~/.bashrc fi User specific environment and startup programs PATH=$PATH:$HOME/bin; export PATH ORACLE_BASE=/app/oracle ORACLE_SID=orcl export ORACLE_BASE ORACLE_SID I then shutdown the virtual machine shared my desktop folder from my windows 7 then turned back on the virtual machine logged in as chris opened up a terminal then: su - for some reason the shared folder didn't appear so I reinstalled vmware tools again and restarted then same as before su - cp -R linux_oracle/database /db; chown -R oracle:oinstall /db; chmod -R 775 /db; ll /db drwxrwxr-x. 8 oracle oinstall 4096 Jun 5 06:20 database exit su - oracle cd /db/database ./runInstaller AND FINALLY THE INFAMOUS JAVA:132 ERROR MESSAGE Starting Oracle Universal Installer... Checking Temp space: must be greater than 80 MB. Actual 65646 MB Passed Checking swap space: must be greater than 150 MB. Actual 6015 MB Passed Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-06-05_06-47-12AM. Please wait ...[oracle@localhost database]$ Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2012-06-05_06-47-12AM/jdk/jre/lib/i386/xawt/libmawt.so: libXext.so.6: cannot open shared object file: No such file or directory at java.lang.ClassLoader$NativeLibrary.load(Native Method) at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1751) at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1647) at java.lang.Runtime.load0(Runtime.java:769) at java.lang.System.load(System.java:968) at java.lang.ClassLoader$NativeLibrary.load(Native Method) at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1751) at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1668) at java.lang.Runtime.loadLibrary0(Runtime.java:822) at java.lang.System.loadLibrary(System.java:993) at sun.security.action.LoadLibraryAction.run(LoadLibraryAction.java:50) at java.security.AccessController.doPrivileged(Native Method) at java.awt.Toolkit.loadLibraries(Toolkit.java:1509) at java.awt.Toolkit.(Toolkit.java:1530) at com.jgoodies.looks.LookUtils.isLowResolution(Unknown Source) at com.jgoodies.looks.LookUtils.(Unknown Source) at com.jgoodies.looks.plastic.PlasticLookAndFeel.(PlasticLookAndFeel.java:122) at java.lang.Class.forName0(Native Method) at java.lang.Class.forName(Class.java:242) at javax.swing.SwingUtilities.loadSystemClass(SwingUtilities.java:1783) at javax.swing.UIManager.setLookAndFeel(UIManager.java:480) at oracle.install.commons.util.Application.startup(Application.java:758) at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:164) at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:181) at oracle.install.commons.base.driver.common.Installer.startup(Installer.java:265) at oracle.install.ivw.db.driver.DBInstaller.startup(DBInstaller.java:114) at oracle.install.ivw.db.driver.DBInstaller.main(DBInstaller.java:132)

  Read the article

• ProFTPd server on Ubuntu getting access denied message when successfully authenticated?

  - by exxoid

  I have a Ubuntu box with a ProFTPD 1.3.4a Server, when I try to log in via my FTP Client I cannot do anything as it does not allow me to list directories; I have tried logging in as root and as a regular user and tried accessing different paths within the FTP Server. The error I get in my FTP Client is: Status: Retrieving directory listing... Command: CDUP Response: 250 CDUP command successful Command: PWD Response: 257 "/var" is the current directory Command: PASV Response: 227 Entering Passive Mode (172,16,4,22,237,205). Command: MLSD Response: 550 Access is denied. Error: Failed to retrieve directory listing Any idea? Here is the config of my proftpd: # # /etc/proftpd/proftpd.conf -- This is a basic ProFTPD configuration file. # To really apply changes, reload proftpd after modifications, if # it runs in daemon mode. It is not required in inetd/xinetd mode. # # Includes DSO modules Include /etc/proftpd/modules.conf # Set off to disable IPv6 support which is annoying on IPv4 only boxes. UseIPv6 off # If set on you can experience a longer connection delay in many cases. IdentLookups off ServerName "Drupal Intranet" ServerType standalone ServerIdent on "FTP Server ready" DeferWelcome on # Set the user and group that the server runs as User nobody Group nogroup MultilineRFC2228 on DefaultServer on ShowSymlinks on TimeoutNoTransfer 600 TimeoutStalled 600 TimeoutIdle 1200 DisplayLogin welcome.msg DisplayChdir .message true ListOptions "-l" DenyFilter \*.*/ # Use this to jail all users in their homes # DefaultRoot ~ # Users require a valid shell listed in /etc/shells to login. # Use this directive to release that constrain. # RequireValidShell off # Port 21 is the standard FTP port. Port 21 # In some cases you have to specify passive ports range to by-pass # firewall limitations. Ephemeral ports can be used for that, but # feel free to use a more narrow range. # PassivePorts 49152 65534 # If your host was NATted, this option is useful in order to # allow passive tranfers to work. You have to use your public # address and opening the passive ports used on your firewall as well. # MasqueradeAddress 1.2.3.4 # This is useful for masquerading address with dynamic IPs: # refresh any configured MasqueradeAddress directives every 8 hours <IfModule mod_dynmasq.c> # DynMasqRefresh 28800 </IfModule> # To prevent DoS attacks, set the maximum number of child processes # to 30. If you need to allow more than 30 concurrent connections # at once, simply increase this value. Note that this ONLY works # in standalone mode, in inetd mode you should use an inetd server # that allows you to limit maximum number of processes per service # (such as xinetd) MaxInstances 30 # Set the user and group that the server normally runs at. # Umask 022 is a good standard umask to prevent new files and dirs # (second parm) from being group and world writable. Umask 022 022 # Normally, we want files to be overwriteable. AllowOverwrite on # Uncomment this if you are using NIS or LDAP via NSS to retrieve passwords: # PersistentPasswd off # This is required to use both PAM-based authentication and local passwords AuthPAMConfig proftpd AuthOrder mod_auth_pam.c* mod_auth_unix.c # Be warned: use of this directive impacts CPU average load! # Uncomment this if you like to see progress and transfer rate with ftpwho # in downloads. That is not needed for uploads rates. # UseSendFile off TransferLog /var/log/proftpd/xferlog SystemLog /var/log/proftpd/proftpd.log # Logging onto /var/log/lastlog is enabled but set to off by default #UseLastlog on # In order to keep log file dates consistent after chroot, use timezone info # from /etc/localtime. If this is not set, and proftpd is configured to # chroot (e.g. DefaultRoot or <Anonymous>), it will use the non-daylight # savings timezone regardless of whether DST is in effect. #SetEnv TZ :/etc/localtime <IfModule mod_quotatab.c> QuotaEngine off </IfModule> <IfModule mod_ratio.c> Ratios off </IfModule> # Delay engine reduces impact of the so-called Timing Attack described in # http://www.securityfocus.com/bid/11430/discuss # It is on by default. <IfModule mod_delay.c> DelayEngine on </IfModule> <IfModule mod_ctrls.c> ControlsEngine off ControlsMaxClients 2 ControlsLog /var/log/proftpd/controls.log ControlsInterval 5 ControlsSocket /var/run/proftpd/proftpd.sock </IfModule> <IfModule mod_ctrls_admin.c> AdminControlsEngine off </IfModule> # # Alternative authentication frameworks # #Include /etc/proftpd/ldap.conf #Include /etc/proftpd/sql.conf # # This is used for FTPS connections # #Include /etc/proftpd/tls.conf # # Useful to keep VirtualHost/VirtualRoot directives separated # #Include /etc/proftpd/virtuals.con # A basic anonymous configuration, no upload directories. # <Anonymous ~ftp> # User ftp # Group nogroup # # We want clients to be able to login with "anonymous" as well as "ftp" # UserAlias anonymous ftp # # Cosmetic changes, all files belongs to ftp user # DirFakeUser on ftp # DirFakeGroup on ftp # # RequireValidShell off # # # Limit the maximum number of anonymous logins # MaxClients 10 # # # We want 'welcome.msg' displayed at login, and '.message' displayed # # in each newly chdired directory. # DisplayLogin welcome.msg # DisplayChdir .message # # # Limit WRITE everywhere in the anonymous chroot # <Directory *> # <Limit WRITE> # DenyAll # </Limit> # </Directory> # # # Uncomment this if you're brave. # # <Directory incoming> # # # Umask 022 is a good standard umask to prevent new files and dirs # # # (second parm) from being group and world writable. # # Umask 022 022 # # <Limit READ WRITE> # # DenyAll # # </Limit> # # <Limit STOR> # # AllowAll # # </Limit> # # </Directory> # # </Anonymous> # Include other custom configuration files Include /etc/proftpd/conf.d/ UseReverseDNS off <Global> RootLogin on UseFtpUsers on ServerIdent on DefaultChdir /var/www DeleteAbortedStores on LoginPasswordPrompt on AccessGrantMsg "You have been authenticated successfully." </Global> Any idea what could be wrong? Thanks for your help!

  Read the article

• my server suddenly crashes every 2 days or so. Programmer has no idea, please help find the cause, here is the top

  - by Alex

  Every couple of days my server suddenly crashes and I must request hardware reset at data center to get it back running. Today I came back to my shell and saw the server was dead and "top" was running on it, and see below for the "top" right before the crash. I opened /var/log/messages and scrolled to the reboot time and see nothing, no errors prior to the hard reboot. (I checked in /etc/syslog.conf and I see "*.info;mail.none;authpriv.none;cron.none /var/log/messages" , isn't this good enough to log all problems?) Usually when I look at the top, the swap is never used up like this! I also don't know why mysqld is at 323% cpu (server only runs drupal and its never slow or overloaded). Solver is my application. I don't know whats that 'sh' doing and 'dovecot' doing. Its driving me crazy over the last month, please help me solve this mystery and stop my downtimes. top - 01:10:06 up 6 days, 5 min, 3 users, load average: 34.87, 18.68, 9.03 Tasks: 500 total, 19 running, 481 sleeping, 0 stopped, 0 zombie Cpu(s): 0.0%us, 96.6%sy, 0.0%ni, 1.7%id, 1.8%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 8165600k total, 8139764k used, 25836k free, 428k buffers Swap: 2104496k total, 2104496k used, 0k free, 8236k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 4421 mysql 15 0 571m 105m 976 S 323.5 1.3 9:08.00 mysqld 564 root 20 -5 0 0 0 R 99.5 0.0 2:49.16 kswapd1 25767 apache 19 0 399m 8060 888 D 79.3 0.1 0:06.64 httpd 25781 apache 19 0 398m 5648 492 R 79.0 0.1 0:08.21 httpd 25961 apache 25 0 398m 5700 560 R 76.7 0.1 0:17.81 httpd 25980 apache 25 0 10816 668 520 R 75.0 0.0 0:46.95 sh 563 root 20 -5 0 0 0 D 71.4 0.0 3:12.37 kswapd0 25766 apache 25 0 399m 7256 756 R 69.7 0.1 0:39.83 httpd 25911 apache 25 0 398m 5612 480 R 58.8 0.1 0:17.63 httpd 25782 apache 25 0 440m 38m 648 R 55.2 0.5 0:18.94 httpd 25966 apache 25 0 398m 5640 556 R 55.2 0.1 0:48.84 httpd 4588 root 25 0 74860 596 476 R 53.9 0.0 0:37.90 crond 25939 apache 25 0 2776 172 84 R 48.9 0.0 0:59.46 solver 4575 root 25 0 397m 6004 1144 R 48.6 0.1 1:00.43 httpd 25962 apache 25 0 398m 5628 492 R 47.9 0.1 0:14.58 httpd 25824 apache 25 0 440m 39m 680 D 47.3 0.5 0:57.85 httpd 25968 apache 25 0 398m 5612 528 R 46.6 0.1 0:42.73 httpd 4477 root 25 0 6084 396 280 R 46.3 0.0 0:59.53 dovecot 25982 root 25 0 397m 5108 240 R 45.9 0.1 0:18.01 httpd 25943 apache 25 0 2916 172 8 R 44.0 0.0 0:53.54 solver 30687 apache 25 0 468m 63m 1124 D 42.3 0.8 0:45.02 httpd 25978 apache 25 0 398m 5688 600 R 23.8 0.1 0:40.99 httpd 25983 root 25 0 397m 5272 384 D 14.9 0.1 0:18.99 httpd 935 root 10 -5 0 0 0 D 14.2 0.0 1:54.60 kjournald 25986 root 25 0 397m 5308 420 D 8.9 0.1 0:04.75 httpd 4011 haldaemo 25 0 31568 1476 716 S 5.6 0.0 0:24.36 hald 25956 apache 23 0 398m 5872 644 S 5.6 0.1 0:13.85 httpd 18336 root 18 0 13004 1332 724 R 0.3 0.0 1:46.66 top 1 root 18 0 10372 212 180 S 0.0 0.0 0:05.99 init 2 root RT -5 0 0 0 S 0.0 0.0 0:00.95 migration/0 3 root 34 19 0 0 0 S 0.0 0.0 0:00.01 ksoftirqd/0 4 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/0 5 root RT -5 0 0 0 S 0.0 0.0 0:00.15 migration/1 6 root 34 19 0 0 0 S 0.0 0.0 0:00 .06 ksoftirqd/1 here is a normal top, when server is working fine: top - 01:50:41 up 21 min, 1 user, load average: 2.98, 2.70, 1.68 Tasks: 271 total, 2 running, 269 sleeping, 0 stopped, 0 zombie Cpu(s): 15.0%us, 1.1%sy, 0.0%ni, 81.4%id, 2.4%wa, 0.1%hi, 0.0%si, 0.0%st Mem: 8165600k total, 2035856k used, 6129744k free, 60840k buffers Swap: 2104496k total, 0k used, 2104496k free, 283744k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 2204 apache 17 0 466m 83m 19m S 25.9 1.0 0:22.16 httpd 11347 apache 15 0 466m 83m 19m S 25.9 1.0 0:26.10 httpd 18204 apache 18 0 481m 97m 19m D 25.2 1.2 0:13.99 httpd 4644 apache 18 0 481m 100m 19m D 24.6 1.3 1:17.12 httpd 4727 apache 17 0 481m 99m 19m S 24.3 1.2 1:10.77 httpd 4777 apache 17 0 482m 102m 21m S 23.6 1.3 1:38.27 httpd 8924 apache 15 0 483m 99m 19m S 22.3 1.3 1:13.41 httpd 9390 apache 18 0 483m 99m 19m S 18.9 1.2 1:05.35 httpd 4728 apache 16 0 481m 101m 19m S 14.3 1.3 1:12.50 httpd 4648 apache 15 0 481m 107m 27m S 12.6 1.4 1:18.62 httpd 24955 apache 15 0 467m 82m 19m S 3.3 1.0 0:21.80 httpd 4722 apache 15 0 503m 118m 19m R 1.7 1.5 1:17.79 httpd 4647 apache 15 0 484m 105m 20m S 1.3 1.3 1:40.73 httpd 4643 apache 16 0 481m 100m 20m S 0.7 1.3 1:11.80 httpd 1561 root 15 0 12900 1264 828 R 0.3 0.0 0:00.54 top 4434 mysql 15 0 496m 55m 4812 S 0.3 0.7 0:06.69 mysqld 4646 apache 15 0 481m 100m 19m S 0.3 1.3 1:25.51 httpd 1 root 18 0 10372 692 580 S 0.0 0.0 0:02.09 init 2 root RT -5 0 0 0 S 0.0 0.0 0:00.03 migration/0 3 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/0 4 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/0 5 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/1 6 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/1 7 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/1 8 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/2 9 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/2 10 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/2 11 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/3 12 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/3 13 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/3 14 root RT -5 0 0 0 S 0.0 0.0 0:00.03 migration/4 15 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/4 16 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/4 17 root RT -5 0 0 0 S 0.0 0.0 0:00.02 migration/5 18 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/5 19 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/5 20 root RT -5 0 0 0 S 0.0 0.0 0:00.01 migration/6 21 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/6 22 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/6 23 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/7

  Read the article

• rsync over ssh is not working anymore, while ssh itself is working fine (Write failed: broken pipe)

  - by brazorf

  This issue started happening after i changed router. This is the scenario: Windows7 Host Ubuntu 10.04 Guest (VirtualBox) Ubuntu 10.04 remote server What i used to do is run a very basic rsync command: rsync -avz --delete /local/path/ username@host:/path/to/remote/directory This worked perfect until i did change adsl provider, and i changed router aswell: now, this happens: rsync on Ubuntu Guest is not working anymore (to any random server), if using this new router rsync on Ubuntu Guest is WORKING, if i switch back to old router i tried a new virtual box ubuntu install, and the command is WORKING with both the routers So, the not-working-combo is oldUbuntu + newRouter. To get things worst, i can state that (on the not-working ubuntu) i ping the remote host plain ssh connection to the remote host is working fine (i can auth, connect, and do stuff on the remote host) scp is NOT working (this is just a further thing i tried) This is the console output of the execution, with ssh verbose set to vvvv: root@client:~# rsync -ae 'ssh -vvvv' /root/test-rsync/ {username}@{hostname}:/home/{username}/test/ OpenSSH_5.3p1 Debian-3ubuntu7, OpenSSL 0.9.8k 25 Mar 2009 debug1: Reading configuration data /root/.ssh/config debug1: Applying options for {hostname} debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to {hostname} [{ip.add.re.ss}] port 22. debug1: Connection established. debug1: permanently_set_uid: 0/0 debug3: Not a RSA1 key file /root/.ssh/{private_key}. debug2: key_type_from_name: unknown key type '-----BEGIN' debug3: key_read: missing keytype debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug2: key_type_from_name: unknown key type '-----END' debug3: key_read: missing keytype debug1: identity file /root/.ssh/{private_key} type 1 debug1: Checking blacklist file /usr/share/ssh/blacklist.RSA-2048 debug1: Checking blacklist file /etc/ssh/blacklist.RSA-2048 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.3p1 Debian-3ubuntu7 debug1: match: OpenSSH_5.3p1 Debian-3ubuntu7 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.3p1 Debian-3ubuntu7 debug2: fd 3 setting O_NONBLOCK debug1: SSH2_MSG_KEXINIT sent debug3: Wrote 792 bytes for a total of 831 debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: [email protected],zlib,none debug2: kex_parse_kexinit: [email protected],zlib,none debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_setup: found hmac-md5 debug1: kex: server->client aes128-ctr hmac-md5 [email protected] debug2: mac_setup: found hmac-md5 debug1: kex: client->server aes128-ctr hmac-md5 [email protected] debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug3: Wrote 24 bytes for a total of 855 debug2: dh_gen_key: priv key bits set: 125/256 debug2: bits set: 525/1024 debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug3: Wrote 144 bytes for a total of 999 debug3: check_host_in_hostfile: filename /root/.ssh/known_hosts debug3: check_host_in_hostfile: match line 4 debug3: check_host_in_hostfile: filename /root/.ssh/known_hosts debug3: check_host_in_hostfile: match line 5 debug1: Host '{hostname}' is known and matches the RSA host key. debug1: Found key in /root/.ssh/known_hosts:4 debug2: bits set: 512/1024 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug3: Wrote 16 bytes for a total of 1015 debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug3: Wrote 48 bytes for a total of 1063 debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /root/.ssh/{private_key} (0x7f3ad0e7f9b0) debug3: Wrote 80 bytes for a total of 1143 debug1: Authentications that can continue: publickey,password debug3: start over, passed a different list publickey,password debug3: preferred gssapi-keyex,gssapi-with-mic,gssapi,publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Offering public key: /root/.ssh/{private_key} debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply debug3: Wrote 368 bytes for a total of 1511 debug1: Server accepts key: pkalg ssh-rsa blen 277 debug2: input_userauth_pk_ok: fp 1b:65:36:92:59:b3:12:3e:8c:c6:03:28:d4:81:09:dc debug3: sign_and_send_pubkey debug1: read PEM private key done: type RSA debug3: Wrote 656 bytes for a total of 2167 debug1: Enabling compression at level 6. debug1: Authentication succeeded (publickey). debug2: fd 4 setting O_NONBLOCK debug3: fd 5 is O_NONBLOCK debug1: channel 0: new [client-session] debug3: ssh_session2_open: channel_new: 0 debug2: channel 0: send open debug1: Requesting [email protected] debug1: Entering interactive session. debug3: Wrote 112 bytes for a total of 2279 debug2: callback start debug2: client_session2_setup: id 0 debug1: Sending environment. debug3: Ignored env TERM debug3: Ignored env SHELL debug3: Ignored env SSH_CLIENT debug3: Ignored env SSH_TTY debug1: Sending env LC_ALL = en_US.UTF-8 debug2: channel 0: request env confirm 0 debug3: Ignored env USER debug3: Ignored env LS_COLORS debug3: Ignored env MAIL debug3: Ignored env PATH debug3: Ignored env PWD debug1: Sending env LANG = en_US.UTF-8 debug2: channel 0: request env confirm 0 debug3: Ignored env SHLVL debug3: Ignored env HOME debug3: Ignored env LANGUAGE debug3: Ignored env LOGNAME debug3: Ignored env SSH_CONNECTION debug3: Ignored env LESSOPEN debug3: Ignored env LESSCLOSE debug3: Ignored env _ debug1: Sending command: rsync --server -logDtpre.iLsf . /home/{username}/test/ debug2: channel 0: request exec confirm 1 debug2: fd 3 setting TCP_NODELAY debug2: callback done debug2: channel 0: open confirm rwindow 0 rmax 32768 debug3: Wrote 208 bytes for a total of 2487 At this point everything freeze for lots of minutes, ending in Write failed: Broken pipe rsync: connection unexpectedly closed (0 bytes received so far) [sender] rsync error: unexplained error (code 255) at io.c(601) [sender=3.0.7] Any suggestion? Thank You F. Edit 2012/09/13: i am changing title and issue definition, since i made some TINY step ahead and i think i can give more detailed clues.

  Read the article

• DNS resolution problems; dig SERVFAIL error

  - by JustinP

  I'm setting up a couple of dedicated servers, and having problems setting up my nameservers properly. One of these is a LEMP server (LAMP with nginx in place of Apache), and the other will function solely as an email server, running exim/dovecot/ASSP antispam (no Apache). The LEMP server is CentOS 5.5, with no control panel, while the email server is CentOS 5.5 as well, with cPanel/WHM. So, I've had problems getting DNS set up properly. I have two domains, each one pointing to one of these servers. The nameservers are registered correctly with the domain registrar, and the nameserver IPs are entered correctly as well. I've spoken to tech support at the registrar and they confirm that everything is set up on their end. Not knowing much about DNS, I googled nameservers and DNS until I nearly went blind, and spent hours messing with the configuration. Eventually, I got the LEMP server's DNS working properly (no cPanel). Pleased with this triumph, I'm trying to mimic that configuration and repeat the process with the email server, and it's just not happening. The nameserver starts and stops, but the domain doesn't resolve. Things I have tried Going through standard procedures to set up DNS in WHM Clearing all DNS information, uninstalling BIND, then reinstalling all of that and again going through WHM procedures for setting up DNS Clearing all DNS information, and setting up BIND via shell (completely outside of cPanel) by using my config and zone files from the LEMP server as a template named runs just fine, but nothing is resolving. When I "dig any example.com" I get a SERVFAIL message. Nslookups return no information. Here are my config and zone files. named.conf controls { inet 127.0.0.1 allow { localhost; } keys { coretext-key; }; }; options { listen-on port 53 { any; }; listen-on-v6 port 53 { ::1; }; directory "/var/named"; dump-file "/var/named/data/cache_dump.db"; statistics-file "/var/named/data/named_stats.txt"; memstatistics-file "/var/named/data/named_mem_stats.txt"; // Those options should be used carefully because they disable port // randomization // query-source port 53; // query-source-v6 port 53; allow-query { any; }; allow-query-cache { any; }; }; logging { channel default_debug { file "data/named.run"; severity dynamic; }; }; view "localhost_resolver" { match-clients { 127.0.0.0/24; }; match-destinations { localhost; }; recursion yes; //zone "." IN { // type hint; // file "/var/named/named.ca"; //}; include "/etc/named.rfc1912.zones"; }; view "internal" { /* This view will contain zones you want to serve only to "internal" clients that connect via your directly attached LAN interfaces - "localnets" . */ match-clients { localnets; }; match-destinations { localnets; }; recursion yes; zone "." IN { type hint; file "/var/named/named.ca"; }; // include "/var/named/named.rfc1912.zones"; // you should not serve your rfc1912 names to non-localhost clients. // These are your "authoritative" internal zones, and would probably // also be included in the "localhost_resolver" view above : zone "example.com" { type master; file "data/db.example.com"; }; zone "3.2.1.in-addr.arpa" { type master; file "data/db.1.2.3"; }; }; view "external" { /* This view will contain zones you want to serve only to "external" clients * that have addresses that are not on your directly attached LAN interface subnets: */ match-clients { any; }; match-destinations { any; }; recursion no; // you'd probably want to deny recursion to external clients, so you don't // end up providing free DNS service to all takers allow-query-cache { none; }; // Disable lookups for any cached data and root hints // all views must contain the root hints zone: //include "/etc/named.rfc1912.zones"; zone "." IN { type hint; file "/var/named/named.ca"; }; zone "example.com" { type master; file "data/db.example.com"; }; zone "3.2.1.in-addr.arpa" { type master; file "data/db.1.2.3"; }; }; include "/etc/rndc.key"; db.example.com $TTL 1D ; ; Zone file for example.com ; ; Mandatory minimum for a working domain ; @ IN SOA ns1.example.com. contact.example.com. ( 2011042905 ; serial 8H ; refresh 2H ; retry 4W ; expire 1D ; default_ttl ) NS ns1.example.com. NS ns2.example.com. ns1 A 1.2.3.4 ns2 A 1.2.3.5 example.com. A 1.2.3.4 localhost A 127.0.0.1 www CNAME example.com. mail CNAME example.com. ; db.1.2.3 $TTL 1D $ORIGIN 3.2.1.in-addr.arpa. @ IN SOA ns1.example.com contact.example.com. ( 2011042908 ; 8H ; 2H ; 4W ; 1D ; ) NS ns1.example.com. NS ns2.example.com. 4 PTR hostname.example.com. 5 PTR hostname.example.com. ; Also of note: both of these servers are managed. Tech support is very responsive, and largely useless. Hours go by with them asking me questions to narrow down what could be wrong, then they pass the ticket to the tech on the next shift, who ignores everything that's happened already and spend his whole shift asking all the same questions the last guy asked. So, in summary: *Nameservers, with IPs, are correctly registered with domain registrar *named is configured and running *...and must not be configured correctly, because nothing resolves. Any help would be great. I changed domains and IPs in the files to generics, but let me know if you need to know the domain in question. Thanks! UPDATE I found that I didn't have 127.0.0.1 in /etc/resolv.conf, so I added it, along with my two public IPs that I have named listening on. resolv.conf search www.example.com example.com nameserver 127.0.0.1 nameserver 7.8.9.10 ;Was in here by default, authoritative nameserver of hosting company nameserver 1.2.3.4 ;Public IP #1 nameserver 1.2.3.5 ;Public IP #2 Now when I DIG example.com from the host, it resolves. If I try to DIG from my other server (in the same datacenter), or from the internet, it times out or I get SERVFAIL.

  Read the article

• Autounattend.xml not being recognized in VirtualBox

  - by beagle

  I am working my way through the steps on this page to prepare an unattended installation of Windows 7 Enterprise x64 for purposes of a college assignment which simply requires the process to be carried out and documented. Both the "technician" and "reference" computers are virtual machines created in VirtualBox 4.3.12, as will be the destination computer. I seem to have successfully completed Step 1, building an Autounattend.xml answer file using Windows System Image Manager, in as far as the answer file validates successfully. The problem arises when I try to install Windows on the reference machine from the DVD image in conjunction with the Autounattend file on a USB drive. I have tried a couple of different USB devices, and the devices themselves seem to be recognized, but the answer file does not, as instead of taking the configuration settings from the file the user interface appears as in a manual installation. Has anyone come across this problem or a solution? The xml created by Windows SIM is below for reference in case the problem is with the file itself. <?xml version="1.0" encoding="utf-8"?> <unattend xmlns="urn:schemas-microsoft-com:unattend"> <settings pass="oobeSystem"> <component name="Microsoft-Windows-Deployment" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <Reseal> <Mode>Audit</Mode> </Reseal> </component> <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <OOBE> <HideEULAPage>true</HideEULAPage> <ProtectYourPC>3</ProtectYourPC> </OOBE> </component> </settings> <settings pass="windowsPE"> <component name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <SetupUILanguage> <UILanguage>en-IE</UILanguage> </SetupUILanguage> <InputLocale>en-IE</InputLocale> <SystemLocale>en-IE</SystemLocale> <UILanguage>en-IE</UILanguage> <UserLocale>en-IE</UserLocale> </component> <component name="Microsoft-Windows-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <DiskConfiguration> <Disk wcm:action="add"> <CreatePartitions> <CreatePartition wcm:action="add"> <Order>1</Order> <Size>300</Size> <Type>Primary</Type> </CreatePartition> <CreatePartition wcm:action="add"> <Order>2</Order> <Extend>true</Extend> <Type>Primary</Type> </CreatePartition> </CreatePartitions> <ModifyPartitions> <ModifyPartition wcm:action="add"> <Active>true</Active> <Format>NTFS</Format> <Label>System</Label> <Order>1</Order> <PartitionID>1</PartitionID> </ModifyPartition> <ModifyPartition wcm:action="add"> <Format>NTFS</Format> <Label>Windows</Label> <Order>2</Order> <PartitionID>2</PartitionID> </ModifyPartition> </ModifyPartitions> <DiskID>0</DiskID> <WillWipeDisk>true</WillWipeDisk> </Disk> <WillShowUI>OnError</WillShowUI> </DiskConfiguration> <ImageInstall> <OSImage> <InstallTo> <DiskID>0</DiskID> <PartitionID>2</PartitionID> </InstallTo> <InstallToAvailablePartition>false</InstallToAvailablePartition> <WillShowUI>OnError</WillShowUI> </OSImage> </ImageInstall> <UserData> <ProductKey> <WillShowUI>OnError</WillShowUI> </ProductKey> <AcceptEula>true</AcceptEula> </UserData> </component> </settings> <settings pass="specialize"> <component name="Microsoft-Windows-IE-InternetExplorer" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <Home_Page>http://www.example.com</Home_Page> </component> </settings> <cpi:offlineImage cpi:source="wim://technician/users/user/desktop/install.wim#Windows 7 ENTERPRISE" xmlns:cpi="urn:schemas-microsoft-com:cpi" />

  Read the article

< Previous Page | 377 378 379 380 381 382 383  | Next Page >