Search Results

Search found 25482 results on 1020 pages for 'development methodologies'.

Page 382/1020 | < Previous Page | 378 379 380 381 382 383 384 385 386 387 388 389  | Next Page >

  • General visual effects to meshes/entities

    - by Pacha
    I am trying to add some visual effects to some entities, meshes, or whatever you want to call them as they are looking pretty dull in my game right now. What I want to achieve is this: http://youtu.be/zox8935PLw0?t=36s (the "texture" gets disintegrated and then goes back to normal, covering the whole mesh.) Also I would like to know what is the best way to add effects like the one in the video to my game (for example, thunder effects, shattering, etc.) I know that I can do some things with shaders, but I haven't learned them too well and I am still in a beginner level. I am using Ogre3D, and GLSL for shaders. Thanks! Note: this is a screen-shot of my game, I want to apply the effect in the video to my main character):

    Read the article

  • Pathfinding and BSP with Box2D

    - by Amplify91
    I'm looking into implementing AI in my 2D side-scrolling platformer, and I'm looking into using algorithms such as A*. For many kinds of pathfinding, we need some sort of grid or systems of nodes or polygon areas. My problem is that I am using Box2d for physics and I am not sure how best to create a structure that my AI can use besides placing individual nodes manually (something I really want to avoid) and using some sort of steering behavior. My level design is tile-based with each tile being about half of the height/width of my main character. The tiles are not all square (some are sloped). I'd like to have a system that can see what the terrain looks like for pathfinding and also keep track of the positions of other actors such as enemies. I'd like to avoid directly placing any nodes into my level design except for possible endpoints or goals. This question is related: How do you do AI path following within a 2d physics engine like farseer/box2d?, but it doesn't specify what kind of structure I could use instead of a list of nodes. I'm looking for some kind of grid or type of BSP that I can query for algorithms like A*.

    Read the article

  • Ways to earn money through Flash games

    - by Maged
    If you like developing flash games just for fun, why not make money through them? There are different ways you can monetize your flash game: In Game Ads: Some common examples: Mochi Ads gamejacket ad4game CPMStar InviziAds You can make money by helping online gaming companies test and evaluate new games. Many of those companies are seeking feedback and reviews of their newest games. Find a sponsor and license your game. One of the quickest yet hardest ways to make money from the flash games you create is to find a website who is willing to sponsor them. With a single sponsorship, an individual can make anywhere from $1000-$7000 for a game. What are the best ads from these sites? If the game will be in social websites like Facebook and MySpace, will it still be useful to try other sites? Are there any other ways to earn money from a Flash game?

    Read the article

  • Performance issues with visibility detection and object transparency

    - by maul
    I'm working on a 3d game that has a view similar to classic isometric games (diablo, etc.). One of the things I'm trying to implement is the effect of turning walls transparent when the player walks behind them. By itself this is not a huge issue, but I'm having trouble determining which walls should be transparent exactly. I can't use a circle or square mask. There are a lot of cases where the wall piece at the same (relative) position has different visibility depending on the surrounding area. With the help of a friend I came up with this algorithm: Create a grid around the player that contains a lot of "visibility points" (my game is semi tile-based so I create one point for every tile on the grid) - the size of the square's side is close to the radius where I make objects transparent. I found 6x6 to be a good value, so that's 36 visibility points total. For every visibility point on the grid, check if that point is in the player's line of sight. For every visibility point that is in the LOS, cast a ray from the camera to that point and mark all objects the ray hits as transparent. This algorithm works - not perfectly, but only requires some tuning - however this is very slow. As you can see, it requries 36 ray casts minimum, but most of the time 60-70 depending on the position. That's simply too much for the CPU. Is there a better way to do this? I'm using Unity 3D but I'm not looking for an engine-specific solution.

    Read the article

  • XNA Quadtree with LOD

    - by Byron Cobb
    I'm looking to create a fairly large environment, and as such would like to implement a quadtree and use LOD on it. I've looked through numerous examples and I get the basic idea of a quadtree. Start with a root node with 4 vertices covering the whole map and divide into 4 children nodes until I meet some criteria(max number of triangles) I'm looking for some very very basic algorithm or explanation with respect to drawing the quadtree. What vertices need to be stored per iteration? When do I determine what vertices to draw? When to update indices and vertices? Hope to integrate the bounding frustrum? Do I include parent and child vertices? I'm looking for very simple instruction on what to do. I've scoured the internet for days now looking, but everyone adds extra code and a different spin without explanation. I understand quadtrees, but not with respect to 3d rendering and lod. A link to an outside source will probably have been read by myself already and won't help. Regards, Byron.

    Read the article

  • Help with "Cannot find ContentTypeReader BB.HeightMapInfoReader, BB, Version=1.0.0.0, Culture=neutral." needed

    - by rFactor
    Hi, I have this irritating problem in XNA that I have spent my Saturday with: Cannot find ContentTypeReader BB.HeightMapInfoReader, BB, Version=1.0.0.0, Culture=neutral. It throws me that when I do (within the game assembly's Renderer.cs class): this.terrain = this.game.Content.Load<Model>("heightmap"); There is a heightmap.bmp and I don't think there's anything wrong with it, because I used it in a previous version which I switched to this new better system. So, I have a GeneratedGeometryPipeline assembly that has these classes: HeightMapInfoContent, HeightMapInfoWriter, TerrainProcessor. The GeneratedGeometryPipeline assembly does not reference any other assemblies under the solution. Then I have the game assembly that neither references any other solution assemblies and has these classes: HeightMapInfo, HeightMapInfoReader. All game assembly classes are under namespace BB and the GeneratedGeometryPipeline classes are under the namespace GeneratedGeometryPipeline. I do not understand why it does not find it. Here's some code from the GeneratedGeometryPipeline.HeightMapInfoWriter: /// <summary> /// A TypeWriter for HeightMapInfo, which tells the content pipeline how to save the /// data in HeightMapInfo. This class should match HeightMapInfoReader: whatever the /// writer writes, the reader should read. /// </summary> [ContentTypeWriter] public class HeightMapInfoWriter : ContentTypeWriter<HeightMapInfoContent> { protected override void Write(ContentWriter output, HeightMapInfoContent value) { output.Write(value.TerrainScale); output.Write(value.Height.GetLength(0)); output.Write(value.Height.GetLength(1)); foreach (float height in value.Height) { output.Write(height); } foreach (Vector3 normal in value.Normals) { output.Write(normal); } } /// <summary> /// Tells the content pipeline what CLR type the /// data will be loaded into at runtime. /// </summary> public override string GetRuntimeType(TargetPlatform targetPlatform) { return "BB.HeightMapInfo, BB, Version=1.0.0.0, Culture=neutral"; } /// <summary> /// Tells the content pipeline what worker type /// will be used to load the data. /// </summary> public override string GetRuntimeReader(TargetPlatform targetPlatform) { return "BB.HeightMapInfoReader, BB, Version=1.0.0.0, Culture=neutral"; } } Can someone help me out?

    Read the article

  • Simple iOS glDrawElements - BAD_ACCESS

    - by user699215
    You can copy paste this into the default OpenGl template created in Xcode. Why am I not seeing anything :-) It is strange as the glDrawArrays(GL_TRIANGLES, 0, 3); is working fine, but with glDrawElements(GL_TRIANGLE_STRIP, sizeof(indices)/sizeof(GLubyte), GL_UNSIGNED_BYTE, indices); Is giving BAD_ACCESS? Copy paste this into Xcode default OpenGl template: ViewController #import "ViewController.h" #define BUFFER_OFFSET(i) ((char *)NULL + (i)) // Uniform index. enum { UNIFORM_MODELVIEWPROJECTION_MATRIX, UNIFORM_NORMAL_MATRIX, NUM_UNIFORMS }; GLint uniforms[NUM_UNIFORMS]; // Attribute index. enum { ATTRIB_VERTEX, ATTRIB_NORMAL, NUM_ATTRIBUTES }; @interface ViewController () { GLKMatrix4 _modelViewProjectionMatrix; GLKMatrix3 _normalMatrix; float _rotation; GLuint _vertexArray; GLuint _vertexBuffer; NSArray* arrayOfVertex; } @property (strong, nonatomic) EAGLContext *context; @property (strong, nonatomic) GLKBaseEffect *effect; - (void)setupGL; - (void)tearDownGL; @end @implementation ViewController - (void)viewDidLoad { [super viewDidLoad]; self.context = [[EAGLContext alloc] initWithAPI:kEAGLRenderingAPIOpenGLES2]; GLKView *view = (GLKView *)self.view; view.context = self.context; view.drawableDepthFormat = GLKViewDrawableDepthFormat24; [self setupGL]; } - (void)dealloc { [self tearDownGL]; if ([EAGLContext currentContext] == self.context) { [EAGLContext setCurrentContext:nil]; } } - (void)didReceiveMemoryWarning { [super didReceiveMemoryWarning]; if ([self isViewLoaded] && ([[self view] window] == nil)) { self.view = nil; [self tearDownGL]; if ([EAGLContext currentContext] == self.context) { [EAGLContext setCurrentContext:nil]; } self.context = nil; } // Dispose of any resources that can be recreated. } GLuint vertexBufferID; GLuint indexBufferID; static const GLfloat vertices[9] = { -0.5, -0.5, 0.5, 0.5, -0.5, 0.5, -0.5, 0.5, 0.5 }; static const GLubyte indices[3] = { 0, 1, 2 }; - (void)setupGL { [EAGLContext setCurrentContext:self.context]; // [self loadShaders]; self.effect = [[GLKBaseEffect alloc] init]; self.effect.light0.enabled = GL_TRUE; self.effect.light0.diffuseColor = GLKVector4Make(1.0f, 0.4f, 0.4f, 1.0f); glEnable(GL_DEPTH_TEST); // glGenVertexArraysOES(1, &_vertexArray); // glBindVertexArrayOES(_vertexArray); glGenBuffers(1, &vertexBufferID); glBindBuffer(GL_ARRAY_BUFFER, vertexBufferID); glBufferData(GL_ARRAY_BUFFER, sizeof(vertices), vertices, GL_STATIC_DRAW); glGenBuffers(1, &indexBufferID); glBindBuffer(GL_ELEMENT_ARRAY_BUFFER, indexBufferID); glBufferData(GL_ELEMENT_ARRAY_BUFFER, sizeof(indices), indices, GL_STATIC_DRAW); glEnableVertexAttribArray(GLKVertexAttribPosition); glVertexAttribPointer(GLKVertexAttribPosition, // Specifies the index of the generic vertex attribute to be modified. 3, // Specifies the number of components per generic vertex attribute. Must be 1, 2, 3, 4. GL_FLOAT, // GL_FALSE, // 0, // BUFFER_OFFSET(0)); // // glBindVertexArrayOES(0); } - (void)tearDownGL { [EAGLContext setCurrentContext:self.context]; glDeleteBuffers(1, &_vertexBuffer); glDeleteVertexArraysOES(1, &_vertexArray); self.effect = nil; } #pragma mark - GLKView and GLKViewController delegate methods - (void)update { float aspect = fabsf(self.view.bounds.size.width / self.view.bounds.size.height); GLKMatrix4 projectionMatrix = GLKMatrix4MakePerspective(GLKMathDegreesToRadians(65.0f), aspect, 0.1f, 100.0f); self.effect.transform.projectionMatrix = projectionMatrix; GLKMatrix4 baseModelViewMatrix = GLKMatrix4MakeTranslation(0.0f, 0.0f, -4.0f); baseModelViewMatrix = GLKMatrix4Rotate(baseModelViewMatrix, _rotation, 0.0f, 1.0f, 0.0f); // Compute the model view matrix for the object rendered with GLKit GLKMatrix4 modelViewMatrix = GLKMatrix4MakeTranslation(0.0f, 0.0f, -1.5f); modelViewMatrix = GLKMatrix4Rotate(modelViewMatrix, _rotation, 1.0f, 1.0f, 1.0f); modelViewMatrix = GLKMatrix4Multiply(baseModelViewMatrix, modelViewMatrix); self.effect.transform.modelviewMatrix = modelViewMatrix; // Compute the model view matrix for the object rendered with ES2 modelViewMatrix = GLKMatrix4MakeTranslation(0.0f, 0.0f, 1.5f); modelViewMatrix = GLKMatrix4Rotate(modelViewMatrix, _rotation, 1.0f, 1.0f, 1.0f); modelViewMatrix = GLKMatrix4Multiply(baseModelViewMatrix, modelViewMatrix); _normalMatrix = GLKMatrix3InvertAndTranspose(GLKMatrix4GetMatrix3(modelViewMatrix), NULL); _modelViewProjectionMatrix = GLKMatrix4Multiply(projectionMatrix, modelViewMatrix); _rotation += self.timeSinceLastUpdate * 0.5f; } int i; - (void)glkView:(GLKView *)view drawInRect:(CGRect)rect { glClearColor(0.65f, 0.65f, 0.65f, 1.0f); glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); // glBindVertexArrayOES(_vertexArray); // Render the object with GLKit [self.effect prepareToDraw]; //glDrawArrays(GL_TRIANGLES, 0, 3); // Render the object again with ES2 // glDrawArrays(GL_TRIANGLES, 0, 3); glDrawElements(GL_TRIANGLE_STRIP, sizeof(indices)/sizeof(GLubyte), GL_UNSIGNED_BYTE, indices); } @end

    Read the article

  • How do walls affect lighting?

    - by Milkboat
    I have been trying to implement a simple form of lighting in my 2D game. In the screenshot, I don't think it looks very good, kind of just plastered over the top of the map. How would the wall effect how the lighting is displayed? Just looking for tips on how to make my lighting look a bit better. Right now I gave each tile a light value and I change that depending on if there is a light source near by. I don't take in account if there are any objects near by. Screenshot:

    Read the article

  • How to create a 3D world with 2D sprites similar to Ragnorak online?

    - by Romoku
    As far as I know Ragnorak Online is a 3D game world with 2D sprites overlayed. I would like to use this style in a game I am making in Unity, so I would like the player to be able to select little square tiles on the terrain. There are a couple routes I could take such as using a bunch of cubic polygons and linking them together or using one big map. The former approach doesn't seem to make any sense if the world is not flat as polygons wouldn't be reused often. The goal is to break down a 3D polygon into tiles which is heard to wrap my head around. I believe using something like an interval tree or array would be appropriate to store the rectangle grid, but how would I display a rectangle around the selection the player has his mouse over on the polygon terrain itself? Here is a screenshot. Here is a gameplay video. Here is the camera usage.

    Read the article

  • Obtaining a world point from a screen point with an orthographic projection

    - by vargonian
    I assumed this was a straightforward problem but it has been plaguing me for days. I am creating a 2D game with an orthographic camera. I am using a 3D camera rather than just hacking it because I want to support rotating, panning, and zooming. Unfortunately the math overwhelms me when I'm trying to figure out how to determine if a clicked point intersects a bounds (let's say rectangular) in the game. I was under the impression that I could simply transform the screen point (the clicked point) by the inverse of the camera's View * Projection matrix to obtain the world coordinates of the clicked point. Unfortunately this is not the case at all; I get some point that seems to be in some completely different coordinate system. So then as a sanity check I tried taking an arbitrary world point and transforming it by the camera's View*Projection matrices. Surely this should get me the corresponding screen point, but even that didn't work, and it is quickly shattering any illusion I had that I understood 3D coordinate systems and the math involved. So, if I could form this into a question: How would I use my camera's state information (view and projection matrices, for instance) to transform a world point to a screen point, and vice versa? I hope the problem will be simpler since I'm using an orthographic camera and can make several assumptions from that. I very much appreciate any help. If it makes a difference, I'm using XNA Game Studio.

    Read the article

  • Dynamic/Adaptive RLE

    - by Lucius
    So, I'm developing a 2D, tile based game and a map maker thingy - all in Java. The problem is that recently I've been having some memory issues when about 4 maps are loaded. Each one of these maps are composed of 128x128 tiles and have 4 layers (for details and stuff). I already spent a good amount of time searching for solutions and the best thing I found was run-length enconding (RLE). It seems easy enough to use with static data, but is there a way to use it with data that is constantly changing, without a big drop in performance? In my maps, supposing I'm compressing the columns, I would have 128 rows, each with some amount of data (hopefully less than it would be without RLE). Whenever I change a tile, that whole row would have to be checked and I'm affraid that would slow down too much the production (and I'm in a somewhat tight schedule). Well, worst case scenario I work on each map individually, and save them using RLE, but it would be really nice if I could avoind that. EDIT: What I'm currently using to store the data for the tiles is a 2D array of HashMaps that use the layer as key and store the id of the tile in that position - like this: private HashMap< Integer, Integer [][]

    Read the article

  • How to make a ball fall faster on a ramp?

    - by Timothy Williams
    So, I'm making a ball game. Where you pick up the ball, drop it on a ramp, and it flies off in to blocks. The only problem right now is it falls at a normal speed, then lightly falls off, not nearly fast enough to get over the wall and hit the blocks. Is there any way to make the ball go faster down the ramp? Maybe even make it go faster depending on what height you dropped it from (e.g. if you hold it way above the ramp, and drop it, it will drop faster than if you dropped it right above the ramp.)

    Read the article

  • How does a segment based rendering engine work?

    - by Calmarius
    As far as I know Descent was one of the first games that featured a fully 3D environment, and it used a segment based rendering engine. Its levels are built from cubic segments (these cubes may be deformed as long as it remains convex and sides remain roughly flat). These cubes are connected by their sides. The connected sides are traversable (maybe doors or grids can be placed on these sides), while the unconnected sides are not traversable walls. So the game is played inside of this complex. Descent was software rendered and it had to be very fast, to be playable on those 10-100MHz processors of that age. Some latter levels of the game are huge and contain thousands of segments, but these levels are still rendered reasonably fast. So I think they tried to minimize the amount of cubes rendered somehow. How to choose which cubes to render for a given location? As far as I know they used a kind of portal rendering, but I couldn't find what was the technique used in this particular kind of engine. I think the fact that the levels are built from convex quadrilateral hexahedrons can be exploited.

    Read the article

  • Push back rectangle where collision happens

    - by Tifa
    I have a tile collision on a game I am creating but the problem is once a collision happens for example a collision happens in right side my sprite cant move to up and bottom :( thats because i set the speed to 0. I thinks its wrong. here is my code: int startX, startY, endX, endY; float pushx = 0,pushy = 0; // move player if(Gdx.input.isKeyPressed(Input.Keys.LEFT)){ dx=-1; currentWalk = leftWalk; } if(Gdx.input.isKeyPressed(Input.Keys.RIGHT)){ dx=1; currentWalk = rightWalk; } if(Gdx.input.isKeyPressed(Input.Keys.DOWN)){ dy=-1; currentWalk = downWalk; } if(Gdx.input.isKeyPressed(Input.Keys.UP)){ dy=1; currentWalk = upWalk; } sr.setProjectionMatrix(camera.combined); sr.begin(ShapeRenderer.ShapeType.Line); Rectangle koalaRect = rectPool.obtain(); koalaRect.set(player.getX(), player.getY(), pw, ph /2 ); float oldX = player.getX(), oldY = player.getY(); // THIS LINE WAS ADDED player.setXY(player.getX() + dx * Gdx.graphics.getDeltaTime() * 4f, player.getY() + dy * Gdx.graphics.getDeltaTime() * 4f); // THIS LINE WAS MOVED HERE FROM DOWN BELOW if(dx> 0) { startX = endX = (int)(player.getX() + pw); } else { startX = endX = (int)(player.getX() ); } startY = (int)(player.getY()); endY = (int)(player.getY() + ph); getTiles(startX, startY, endX, endY, tiles); for(Rectangle tile: tiles) { sr.rect(tile.x,tile.y,tile.getWidth(),tile.getHeight()); if(koalaRect.overlaps(tile)) { //dx = 0; player.setX(oldX); // THIS LINE CHANGED Gdx.app.log("x","hit " + player.getX() + " " + oldX); break; } } if(dy > 0) { startY = endY = (int)(player.getY() + ph ); } else { startY = endY = (int)(player.getY() ); } startX = (int)(player.getX()); endX = (int)(player.getX() + pw); getTiles(startX, startY, endX, endY, tiles); for(Rectangle tile: tiles) { if(koalaRect.overlaps(tile)) { //dy = 0; player.setY(oldY); // THIS LINE CHANGED //Gdx.app.log("y","hit" + player.getY() + " " + oldY); break; } } sr.rect(koalaRect.x,koalaRect.y,koalaRect.getWidth(),koalaRect.getHeight() / 2); sr.setColor(Color.GREEN); sr.end(); I want to push back the sprite when a collision happens but i have no idea how :D pls help

    Read the article

  • Pitch camera around model

    - by ChocoMan
    Currently, my camera rotates with my model's Y-Axis (yaw) perfectly. What I'm having trouble with is rotating the X-Axis (pitch) along with it. I've tried the same method for cameraYaw() in the form of cameraPitch(), while adjusting the axis to Vector.Right, but the camera wouldn't pitch at all in accordance to the Y-Axes of the controller. Is there a way similar to this to get the same effect for pitching the camera around the model? // Rotates model on its own Y-axis public void modelRotMovement(GamePadState pController) { Yaw = pController.ThumbSticks.Right.X * MathHelper.ToRadians(speedAngleMAX); AddRotation = Quaternion.CreateFromYawPitchRoll(Yaw, 0, 0); ModelLoad.MRotation *= AddRotation; MOrientation = Matrix.CreateFromQuaternion(ModelLoad.MRotation); } // Orbit (yaw) Camera around model public void cameraYaw(Vector3 axis, float yaw, float pitch) { Pitch = pController.ThumbSticks.Right.Y * MathHelper.ToRadians(speedAngleMAX); ModelLoad.CameraPos = Vector3.Transform(ModelLoad.CameraPos - ModelLoad.camTarget, Matrix.CreateFromAxisAngle(axis, yaw)) + ModelLoad.camTarget; } public void updateCamera() { cameraYaw(Vector3.Up, Yaw); }

    Read the article

  • Electronic circuit simulator four-way flood-filling issues

    - by AJ Weeks
    I've made an electronic circuit board simulator which has simply 3 types of tiles: wires, power sources, and inverters. Wires connect to anything they touch, other than the sides of inverters; inverters have one input side and one output side; and finally power tiles connect in a similar manner as wires. In the case of an infinite loop, caused by the output of the inverter feeding into its input, I want inverters to oscillate (quickly turn on/off). I've attempted to implement a FloodFill algorithm to spread the power throughout the grid, but seem to have gotten something wrong, as only the tiles above the power source get powered (as seen below) I've attempted to debug the program, but have had no luck thus far. My code concerning the updating of power can be seen here.

    Read the article

  • Strange if-else branching behavior in a fragment shader

    - by Winged
    In my fragment shader I have passed an uniform int uLightType variable, which indicates what type of light is in usage right now. The problem is that if-else branching does not work correctly - the fragment shader performs instructions in every if statement block. if (uLightType == 1) { // Spotlight light type vec3 depthTextureCoord = vDepthPosition.xyz / vDepthPosition.w; shadowDepth = unpack(texture2D(uDepthMapSampler, depthTextureCoord.xy)); } else if (uLightType == 2) { // Omni-directional light type shadowDepth = unpack(textureCube(uDepthCubemapSampler, -lightVec)); } In the case when uLightType equals 1, unless I comment out the content of the second if block, it assigns an another value to shadowDepth. Also while uLightType equals 1, when I remove the second 'if' block and change == to != like in the sample code below, nothing happens (which means that uLightType really equals 1). if (uLightType != 1) { // Spotlight light type vec3 depthTextureCoord = vDepthPosition.xyz / vDepthPosition.w; shadowDepth = unpack(texture2D(uDepthMapSampler, depthTextureCoord.xy)); } Also, when I manually create an int variable (which is not an uniform) like this: var lightType = 1; and replace uLightType with it in the if-else branch, everything works fine, so I guess it have something to do with the fact that uLightType is the uniform.

    Read the article

  • Issue porting Cocos2d-x to Android

    - by Anil
    I've written a basic game using Cocos2D-x on XCode. It works fine on the iPhone. Now I'm trying to port it to Android. When I run the script ./build_native.sh inside the proj.android folder, it gives me the following error: jni/../../Classes/MemoryModeLayer.cpp: In member function 'void MemoryModeLayer::startNewGame()': jni/../../Classes/MemoryModeLayer.cpp:109:25: error: 'time' is not a member of 'std' jni/../../Classes/MemoryModeLayer.cpp:109:25: note: suggested alternative: /Users/abc/android-ndk-r9d/platforms/android-8/arch-arm/usr/include/time.h:40:17: note: 'time' jni/../../Classes/MemoryModeLayer.cpp:111:5: error: 'random_shuffle' is not a member of 'std' jni/../../Classes/MemoryModeLayer.cpp:112:5: error: 'random_shuffle' is not a member of 'std' make: *** [obj/local/armeabi/objs/cocos2dcpp_shared/__/__/Classes/MemoryModeLayer.o] Error 1 make: Leaving directory `/Users/abc/cocos2d-x-2.2.3/projects/Game/proj.android' In MemoryModeLayer.cpp I have the following: std::srand(unsigned(std::time(0))); std::random_shuffle(_xCod, _xCod + _numberOfRows); std::random_shuffle(_yCod, _yCod + _numberOfColumns); I've included the following headers as well: #include <string> #include <ctime> #include <algorithm> #include <iostream> #include <iomanip> Also added using namespace std in the header file. Is there anything else that I should do?

    Read the article

  • Creating a retro-style palette swapping effect in OpenGL

    - by Zack The Human
    I'm working on a Megaman-like game where I need to change the color of certain pixels at runtime. For reference: in Megaman when you change your selected weapon then main character's palette changes to reflect the selected weapon. Not all of the sprite's colors change, only certain ones do. This kind of effect was common and quite easy to do on the NES since the programmer had access to the palette and the logical mapping between pixels and palette indices. On modern hardware, though, this is a bit more challenging because the concept of palettes is not the same. All of my textures are 32-bit and do not use palettes. There are two ways I know of to achieve the effect I want, but I'm curious if there are better ways to achieve this effect easily. The two options I know of are: Use a shader and write some GLSL to perform the "palette swapping" behavior. If shaders are not available (say, because the graphics card doesn't support them) then it is possible to clone the "original" textures and generate different versions with the color changes pre-applied. Ideally I would like to use a shader since it seems straightforward and requires little additional work opposed to the duplicated-texture method. I worry that duplicating textures just to change a color in them is wasting VRAM -- should I not worry about that?

    Read the article

  • Homemaking a 2d soft body physics engine

    - by Griffin
    hey so I've decided to Code my own 2D soft-body physics engine in C++ since apparently none exist and I'm starting only with a general idea/understanding on how physics work and could be simulated: by giving points and connections between points properties such as elasticity, density, mass, shape retention, friction, stickiness, etc. What I want is a starting point: resources and helpful examples/sites that could give me the specifics needed to actually make this such as equations and required physics knowledge. It would be great if anyone out there also would give me their attempts or ideas. finally I was wondering if it was possible to... use the source code of an existing 3D engine such as Bullet and transform it to be 2D based? use the source code of a 2D Rigid body physics engine such as box2d as a starting point?

    Read the article

  • How should an object that uses composition set its composed components?

    - by Casey
    After struggling with various problems and reading up on component-based systems and reading Bob Nystrom's excellent book "Game Programming Patterns" and in particular the chapter on Components I determined that this is a horrible idea: //Class intended to be inherited by all objects. Engine uses Objects exclusively. class Object : public IUpdatable, public IDrawable { public: Object(); Object(const Object& other); Object& operator=(const Object& rhs); virtual ~Object() =0; virtual void SetBody(const RigidBodyDef& body); virtual const RigidBody* GetBody() const; virtual RigidBody* GetBody(); //Inherited from IUpdatable virtual void Update(double deltaTime); //Inherited from IDrawable virtual void Draw(BITMAP* dest); protected: private: }; I'm attempting to refactor it into a more manageable system. Mr. Nystrom uses the constructor to set the individual components; CHANGING these components at run-time is impossible. It's intended to be derived and be used in derivative classes or factory methods where their constructors do not change at run-time. i.e. his Bjorne object is just a call to a factory method with a specific call to the GameObject constructor. Is this a good idea? Should the object have a default constructor and setters to facilitate run-time changes or no default constructor without setters and instead use a factory method? Given: class Object { public: //...See below for constructor implementation concerns. Object(const Object& other); Object& operator=(const Object& rhs); virtual ~Object() =0; //See below for Setter concerns IUpdatable* GetUpdater(); IDrawable* GetRenderer(); protected: IUpdatable* _updater; IDrawable* _renderer; private: }; Should the components be read-only and passed in to the constructor via: class Object { public: //No default constructor. Object(IUpdatable* updater, IDrawable* renderer); //...remainder is same as above... }; or Should a default constructor be provided and then the components can be set at run-time? class Object { public: Object(); //... SetUpdater(IUpdater* updater); SetRenderer(IDrawable* renderer); //...remainder is same as above... }; or both? class Object { public: Object(); Object(IUpdater* updater, IDrawable* renderer); //... SetUpdater(IUpdater* updater); SetRenderer(IDrawable* renderer); //...remainder is same as above... };

    Read the article

  • How do you calculate UVW coordinates?

    - by Jenko
    I'm working on a 3d engine and I'm calculating UVT coordinates, where U and V represent pixels on the texture measured in 0-1, and T is: T = perspective / Z But I'm trying to use this perspective-correct triangle rasteriser, which requires a W, per vertex. How do I calculate the W for each vertex for the drawPerspectiveTexturedPolygon() function? Hint: The code comments refer to W as the "homogenous coordinate" ... does that mean anything?

    Read the article

  • Monogame - Input secuence game (Scripting?)

    - by user2662567
    I'm starting to program my very first game, it's a clone of DDR/Stepmania done for research purposes and learning. I (at this early stage) get most of the UI/Music/input work that should be done, but what i still can't grasp is scripting, i've read about Lua and that you shouldn't use it with XNA/Monogame as C# is capable enough, but i cannot get the utility of it. Assuming the needs of my game, ¿What would be the ideal way to implement the input secuences it needs?, i thought of XML/Json, let's say Stage 1 <game> <level id="1"> <step id="1" key="up" time="00:00:01"/> <step id="2" key="left" time="00:00:02"/> </level> </game> Is that a correct implementation? or are there better ways with more benefits?

    Read the article

  • How to load with "simplegame" mode after cooking?

    - by Emran Bayati
    i got a problem after i cook my game in Frontend (udk) ! Every thing is ok during the Cook operation i mean i compiled my scripts,it's ok there's no problem in this step,and i cooked my packages it's ok too ! no problem just like last step. so before i package the whole game;i'll lunch it and see if every thing is ok ! but when i load the game it'll load whit the Unreal tournament default game type ! i mean i don't want it to load with this type ! i want it to load with the "simplegame" game type ! i need to say that i set game type to "simplegame" in the Editor from View world Properties Game Type! but still it's loading with Ut game mode when i cook the game ! I just want load my game in "Simplegame" mode after cooked. if any one can help ! plz help ! Tnx Alot Emran Bayati

    Read the article

  • Rendering large and high poly meshes

    - by Aurus
    Consider an huge terrain that has a lot polygons, to render this terrain I thought of following techniques: Using height-map instead of raw meshes: Yes, but I want to create a lot of caves and stuff that simply wont work with height-maps. Using voxels: Yes, but I think that this would be to much since I don't even want to support changing terrain.. Split into multiple chunks and do some sort of LOD with the mesh: Yes, but how would I do that? Tessellation usually creates more detail not less. Precompute the same mesh in lower poly version (like Mudbox does) and depending on the distance it renders one of these meshes: Graphic memory is limited and uploading only the chunks won't solve that problem since the traffic would be too high. IMO the last one sounds really good, but imagine the following process: Upload and render the chunks depending on the current player position. [No problem] Player will walk straight forward Now we maybe have to change on of the low poly chunk with the high poly one So, Remove the low poly chunk and load the high poly chunk [Already to much traffic here, I think] I am not very experienced in graphic programming and maybe the upper process is totally okay but somehow I think it is too much. And how about the disk space it would require.. I think 3 kind of levels would be fine but isn't that also too much? (I am using OpenGL but I don't think that this is important)

    Read the article

< Previous Page | 378 379 380 381 382 383 384 385 386 387 388 389  | Next Page >