Search Results

Search found 11825 results on 473 pages for 'all tech stuff'.

Page 383/473 | < Previous Page | 379 380 381 382 383 384 385 386 387 388 389 390  | Next Page >

• Django + jQuery: Sometimes AJAX, but always DRY?

  - by Justin Myles Holmes

  Let's say I have an app (in Django) for which I want to sometimes (but not always) load content via ajax. An easy example is logging in. When the user logs in, I don't want to refresh the page, just change things around. Yet, if they are already logged in, and then arrive at (or refresh) the same page, I want it to show the same content. So, in the first case, obviously I do some sort of ajax login and load changes to the page accordingly. Easy enough. But what about in the second case? Do I go back through and add {% if user.authenticated %} all over the place? This seems cold, dark, and WET. On the other hand, I can just wrap all the ajaxy stuff in a javascript function, called loggedIn(), and run that if the user is authenticated. But then I'm faced with two http requests instead of one. Also undesirable. So what's the standard solution here?

  Read the article

• Any HTTP proxies with explicit, configurable support for request/response buffering and delayed conn

  - by Carlos Carrasco

  When dealing with mobile clients it is very common to have multisecond delays during the transmission of HTTP requests. If you are serving pages or services out of a prefork Apache the child processes will be tied up for seconds serving a single mobile client, even if your app server logic is done in 5ms. I am looking for a HTTP server, balancer or proxy server that supports the following: A request arrives to the proxy. The proxy starts buffering in RAM or in disk the request, including headers and POST/PUT bodies. The proxy DOES NOT open a connection to the backend server. This is probably the most important part. The proxy server stops buffering the request when: A size limit has been reached (say, 4KB), or The request has been received completely, headers and body Only now, with (part of) the request in memory, a connection is opened to the backend and the request is relayed. The backend sends back the response. Again the proxy server starts buffering it immediately (up to a more generous size, say 64KB.) Since the proxy has a big enough buffer the backend response is stored completely in the proxy server in a matter of miliseconds, and the backend process/thread is free to process more requests. The backend connection is immediately closed. The proxy sends back the response to the mobile client, as fast or as slow as it is capable of, without having a connection to the backend tying up resources. I am fairly sure you can do 4-6 with Squid, and nginx appears to support 1-3 (and looks like fairly unique in this respect). My question is: is there any proxy server that empathizes these buffering and not-opening-connections-until-ready capabilities? Maybe there is just a bit of Apache config-fu that makes this buffering behaviour trivial? Any of them that it is not a dinosaur like Squid and that supports a lean single-process, asynchronous, event-based execution model? (Siderant: I would be using nginx but it doesn't support chunked POST bodies, making it useless for serving stuff to mobile clients. Yes cheap 50$ handsets love chunked POSTs... sigh)

  Read the article

• System.Windows.Forms.DataVisualization Namespace Fine in One Class but Not in Another

  - by jxpx777

  Hi. I'm getting this error The type or namespace name 'DataVisualization' does not exist in the namespace 'System.Windows.Forms' (are you missing an assembly reference?) Here is my using section of the class: using System; using System.Collections; using System.Collections.Generic; using System.Windows.Forms.DataVisualization.Charting; using System.Windows.Forms.DataVisualization.Charting.Borders3D; using System.Windows.Forms.DataVisualization.Charting.ChartTypes; using System.Windows.Forms.DataVisualization.Charting.Data; using System.Windows.Forms.DataVisualization.Charting.Formulas; using System.Windows.Forms.DataVisualization.Charting.Utilities; namespace myNamespace { public class myClass { // Usual class stuff } } The thing is that I am using the same DataVisualization includes in another class. The only thing that I can think that is different is that the classes that are giving this missing namespace error are Solution Items rather than specific to a project. The projects reference them by link. Anyone have thoughts on what the problem is? I've installed the chart component, .Net 3.5 SP1, and the Chart Add-in for Visual Studio 2008. UPDATE: I moved the items from Solution Items to be regular members of my project and I'm still seeing the same behavior. UPDATE 2: Removing the items from the Solution Items and placing them under my project worked. Another project was still referencing the files which is why I didn't think it worked previously. I'm still curious, though, why I couldn't use the namespace when the classes were Solution Items but moving them underneath a project (with no modifications, mind you) instantly made them recognizable. :\

  Read the article

• Svn repository split problem

  - by Tuminoid

  I want to split a directory from a large Subversion repository to a repository of its own, and keep the history of the files in that directory. I tried the regular way of doing it first svnadmin dump /path/to/repo > largerepo.dump cat largerepo.dump | svndumpfilter include my/directory >mydir.dump but that does not work, since the directory has been moved and copied over the years and files have been moved into and out of it to other parts of the repository. The result is a lot of these: svndumpfilter: Invalid copy source path '/some/old/path' Next thing I tried is to include those /some/old/path as they appear and after a long, long list of files and directories included, the svndumpfilter completes, BUT importing the resulting dump isn't producing the same files as the current directory has. So, how do I properly split the directory from that repository while keeping the history? EDIT: I specifically want trunk/myproj to be the trunk in a new repository PLUS have the new repository include none of the other old stuff, ie. there should not be possibility for anyone to update to old revision before the split and get/see the files. The svndumpfilter solution I tried would achieve exactly that, sadly its not doable since the path/files have been moved around. The solution by ng isn't accetable since its basically a clone+removal of extras which keeps ALL the history, not just relevant myproj history. BUMP C'moon, there must be someone who definitely knows if this is doable or not, and how!

  Read the article

• TableAdapter.Update not working

  - by Wesley

  Here is my function: private void btnSave_Click(object sender, EventArgs e) { wO_FlangeMillBundlesTableAdapter.Update(invClerkDataDataSet.WO_FlangeMillBundles); wO_HeadMillBundlesTableAdapter.Update(invClerkDataDataSet.WO_HeadMillBundles); wO_WebMillBundlesTableAdapter.Update(invClerkDataDataSet.WO_WebMillBundles); int rowsaffected = wO_MillTableAdapter.Update(invClerkDataDataSet.WO_Mill); MessageBox.Show(invClerkDataDataSet.WO_Mill.Rows[0]["GasReading"].ToString()); MessageBox.Show(rowsaffected.ToString()); } You can see the fourth update in the function uses the same functionality as the rest, I just have some debugging stuff added. The first three tables are bound to DataGridViews and work fine. The fourth table has it's members bound to various text boxes. When I change the value in the text box bound to the GasReading column and click save the first MessageBox does in fact show the new value, so it's making it into the dataset correctly. However, the rowsaffected is always showing 0 and the value in the actual database is not being updated. Can anyone see my problem? I understand that the problem must be elsewhere in my code since the four update methods are the same, but I just don't know where to start.

  Read the article

• Convert MFC Doc/View to?

  - by Harvey

  My question will be hard to form, but to start: I have an MFC SDI app that I have worked on for an embarrassingly long time, that never seemed to fit the Doc/View architecture. I.e. there isn't anything useful in the Doc. It is multi-threaded and I need to do more with threading, etc. I dream about also porting it to Linux X Windows, but I know nothing about that programming environment as yet. Maybe Mac also. My question is where to go from here? I think I would like to convert from MFC Doc/View to straight Win API stuff with message loops and window procedures, etc. But the task seems to be huge. Does the Linux X Windows environment use a similar kind of message loop, window procedure architecture? Can I go part way? Like convert a little at a time without rendering my program unusable for long periods of work? What is the best book to read to help me to move in that direction.

  Read the article

• Is Perl's flip-flop operator bugged? It has global state, how can I reset it?

  - by Evan Carroll

  I'm dismayed. Ok, so this was probably the most fun perl bug I've ever found. Even today I'm learning new stuff about perl. Essentially, the flip-flop operator .. which returns false until the left-hand-side returns true, and then true until the right-hand-side returns false keep global state (or that is what I assume.) My question is can I reset it, (perhaps this would be a good addition to perl4-esque hardly ever used reset())? Or, is there no way to use this operator safely? I also don't see this (the global context bit) documented anywhere in perldoc perlop is this a mistake? Code use feature ':5.10'; use strict; use warnings; sub search { my $arr = shift; grep { !( /start/ .. /never_exist/ ) } @$arr; } my @foo = qw/foo bar start baz end quz quz/; my @bar = qw/foo bar start baz end quz quz/; say 'first shot - foo'; say for search \@foo; say 'second shot - bar'; say for search \@bar; Spoiler $ perl test.pl first shot foo bar second shot

  Read the article

• Placement/Positioning/Alignment of UIScrollView w.r.t. length of Title NSString

  - by Shoaibi

  I have a scenario where i show stuff like: ----------------------------------- titleview (UITextView) ______________ tArea (UIScrollView) ttextview (UITextView) ----------------------------------- Now here is the condition: Length of titleview's text is dynamic, varies based on user input. Because of the condition I have trouble placing tArea e.g. UIScrollView on the screen, it either appears way too below than the titleview, or overlaps it. Previously what i did: Count the number of characters in titleview.text.length and divide them by 27 (e.g. characters in one line when using boldSystemFontOfSize:20) and multiply by 10 to get the starting X of tArea e.g. UIScrollView. But that sucked. Because i had to duplicate code for rotation to landscape. What do i have now? : CGSize titlesize = [title sizeWithFont:[UIFont systemFontOfSize:20] constrainedToSize:CGSizeMake(5, 90) lineBreakMode:UILineBreakModeWordWrap]; ttitleview = [[UITextView alloc] initWithFrame:CGRectMake(5, 5, 310,titlesize.height)]; ttitleview.text = title; ttitleview.font = [UIFont boldSystemFontOfSize:20]; ttitleview.backgroundColor = [UIColor clearColor]; ttitleview.editable = NO; [self.view addSubview:ttitleview]; CGSize textsize = [ttext sizeWithFont:[UIFont systemFontOfSize:20] constrainedToSize:CGSizeMake(5, 350) lineBreakMode:UILineBreakModeWordWrap]; tArea = [[UIScrollView alloc] initWithFrame:CGRectMake(5, titlesize.height, 310, 230)]; tArea.contentSize = CGSizeMake(310, textsize.height+20); tArea.pagingEnabled = FALSE; tArea.scrollEnabled = TRUE; tArea.backgroundColor = [UIColor clearColor]; [self.view addSubview:tArea]; ttextview = [[UITextView alloc] initWithFrame:CGRectMake(0, 0, 310, textsize.height + 20)]; ttextview.text = ttext; ttextview.font = [UIFont systemFontOfSize:20]; ttextview.backgroundColor = [UIColor clearColor]; ttextview.editable = NO; [tArea addSubview:ttextview]; But its no use. Looking for an elegant solution than this.

  Read the article

• PHP: If no Results - Split the Searchrequest and Try to find Parts of the Search

  - by elmaso

  Hello, i want to split the searchrequest into parts, if there's nothing to find. example: "nelly furtado ft. jimmy jones" - no results - try to find with nelly, furtado, jimmy or jones.. i have an api url.. thats the difficult part.. i show you some of the actually snippets: $query = urlencode (strip_tags ($_GET[search])); and $found = '0'; if ($source == 'all') { if (!($res = @get_url ('http://api.example.com/?key=' . $API . '&phrase=' . $query . ' . '&sort=' . $sort))) { exit ('<error>Cannot get requested information.</error>'); ; } how can i put a else request in this snippet, like if nothing found take the first word, or the second word, is this possible? or maybe you can tell me were i can read stuff about this function? thank you!!

  Read the article

• How do I disable the network connection from .Net without needing admin priveledges?

  - by Brad Mathews

  I may be SOL on this but I thought I would give throw it out for possible solutions. I am writing a computer access control service to help me control my kids' computer use. Plan on open sourcing it when I have it working. It is written in VB.Net and needs to work on XP through 7. I am running into all sorts of security and desktop access issues on Windows 7. The service needs to run as admin to execute the NetSh command to disable the network. But I cannot interact with the desktop from the service so I IPC to a UI to handle other stuff, but I still cannot detect from the service if the desktop is locked. Argghh! I could get it all working from a hidden windows form app if I could just lick the one piece that needs admin permissions: disabling the network. It does no good if a kid logs on and denies the popup asking if the program should run as administrator and he says no. Also windows 7 will not start a program set to run as admin using HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run Anyone know how to get this working? Or have an outside the box solution? Thanks! Brad

  Read the article

• Populate a form from SQL

  - by xrum

  Hi, I am trying to populate a web from from a SQL table. This is what I have right now, though I am not sure if it's the best way to do things, please give me suggestions: Public Class userDetails Public address1 As String Public address2 As String Public city As String ... ... ... End Class Public Class clsPerson 'set SQL connection Dim objFormat As New clsFormat Dim objConn As New clsConn() Dim connStr As String = objConn.getConn() Dim myConnection As New Data.SqlClient.SqlConnection(connStr) Public Function GetPersonDetails() As userDetails 'connection and all other good stuff here Try ' Execute the command myConnection.Open() dr = myCommand.ExecuteReader() ' Make sure a record was returned If dr.Read() Then ' Create and Populate ApplicantDetails userDetails.address1 = dr("address1") userDetails.address2 = objFormat.CheckNull(dr("address2")) userDetails.city = objFormat.CheckNull(dr("city")) .... Else Err.Raise(4938, "clsUser", "Error in GetUserDetails - User Not Found") End If dr.Close() Finally myConnection.Close() End Try Return userDetails End Function i then use GetPersonDetails() function in my backend to populate the form. like so: Dim userDetails as new userDetails userdetails = getPersonDetails() txtAddress.text = userdetails.address1 etc.... however, there are like 50 fields in the User db, and it seems like a lot of retyping... please help me find a better way to do this. Thank you!

  Read the article

• Devise routes to only use custom sign in page

  - by eblume

  I am trying to learn Devise and seem to have hit a problem that is nearly the same as many, many questions here on SO but just slightly different enough that I am not getting much traction following those questions' threads. I have a very simple application. Users can sign in and sign out (and also the devise 'forgot password' stuff is enabled - I am not concerned about it at this time) and that is it. They can't register, they can't edit their profile other than to change their password, they can't do anything except sign in and sign out. (Account creation will, for now, be handled manually at the command line.) I would vastly prefer that the only page that users can log in from was "/" (root_path). I already have it working where you can log in from "/", and that is great. The problem I am having is that if you type in your user/password combination incorrectly from the root_path login page, it automatically sends you to the Devise sign-in page to continue trying to sign in. How can I make Devise redirect to root_path on sign-in failure? Here are my routes - they are probably not optimal or correctly configured and I would appreciate pointers on fixing them: root to: "core_pages#splash" devise_for :users, skip: [:sessions] as :user do # get 'signin' => 'devise/sessions#new', as: :new_user_session post 'signin' => 'devise/sessions#create', as: :user_session delete 'signout' => 'devise/sessions#destroy', as: :destroy_user_session, via: Devise.mappings[:user].sign_out_via end match '/home' => 'core_pages#home' Note the commented-out 'get signin' line. The system works without this line but, surprisingly (to me), "GET /signin" results in a HTTP 400 (OK) response and renders the Devise login template. I would prefer it return some sort of 'invalid request' or just silently redirect the user to root_path. Running rake routes on these routes gives: root / core_pages#splash user_password POST /users/password(.:format) devise/passwords#create new_user_password GET /users/password/new(.:format) devise/passwords#new edit_user_password GET /users/password/edit(.:format) devise/passwords#edit PUT /users/password(.:format) devise/passwords#update user_session POST /signin(.:format) devise/sessions#create destroy_user_session DELETE /signout(.:format) devise/sessions#destroy home /home(.:format) core_pages#home Thanks!

  Read the article

• Using git-svn with slightly strange svn layout

  - by Ibrahim

  Hi guys, I'm doing an internship and they are using SVN (although there has been some discussion of moving to hg or git but that's not in the immediate future). I like git so I would like to use git-svn to interact with the svn repository and be able to do local commits and branches and stuff like that (rebasing before committing to svn of course). However, there is one slight wrinkle, the svn repository layout is a little weird. It basically looks like this /FOO +-branches +-tags +-trunk +-FOO +-myproject Basically, my project has been stuck into a subdirectory of trunk, and there is another project that is also a subdirectory of the trunk. If I use git-svn and only clone the directory for my project instead of the root, will it get confused or cause any problems? I just wonder because the commit numbers are incremented for the entire repository and not just my project, so would commits be off or anything like that? I probably wouldn't push any branches or tags to SVN because I'd prefer to just do those locally in git and I don't know how git-svn deals with branches and tags anyway, and no one else uses them so I find little point in doing so. Thanks for the help!

  Read the article

• Installing a Windows Service from a separate GUI - how to install .config file along with it?

  - by Shaul

  I have written a GUI (call it MyGUI) for ClickOnce deployment on any given client site. That GUI installs and configures a Windows Service (MyService), using the method described here by @Marc Gravell. Here's my code, run from inside MyGUI, which contains a reference to MyService: using (var inst = new AssemblyInstaller(typeof(MyService.Program).Assembly, new string[] { })) { IDictionary state = new Hashtable(); inst.UseNewContext = true; try { if (uninstall) { inst.Uninstall(state); } else { inst.Install(state); inst.Commit(state); } } catch { try { inst.Rollback(state); } catch { } throw; } } Take note of that first line: I'm grabbing the assembly for MyService, and installing that. Now, trouble is, the way I've done the deployment, I'm effectively referencing the service's EXE file from the GUI's app folder. So now the service fires up and starts looking for stuff in the MyService.config file, and can't find it, because it's living in someone else's app folder, with only the GUI's MyGUI.config file present. So, how do I get MyService.config to be available to the service?

  Read the article

• ColdFusion blank page in IE7 on refresh?

  - by richardtallent

  I'm new to ColdFusion, have a very basic problem that's really slowing me down. I'm making edits in a text editor and refreshing the page in web browsers for testing. Standard web dev stuff, no browser-sniffing, redirection, or other weirdness, and no proxies involved. When I refresh the page in Chrome or Firefox, everything works fine, but when I refresh in IE7, I get a blank page. View Source shows me: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=Content-Type content="text/html; charset=utf-8"></HEAD> <BODY></BODY></HTML> That's it. While I am rendering to the transitional DTD, the real head contains a title, etc. My development server is CF 9, production is 8. This problem has been happening in both. Seems it may only be happening on pages that are the the result of a POST action. I've never experienced this in ASP.NET (my usual development environment) using the same browsers.

  Read the article

• WCF and ASP.NET - Server.Execute throwing object reference not set to an instance of an object

  - by user208662

  Hello, I have an ASP.NET page that calls to a WCF service. This WCF service uses a BackgroundWorker to asynchronously create an ASP.NET page on my server. Oddly, when I execute the WCF Service [OperationContract] [WebInvoke(Method = "POST", BodyStyle = WebMessageBodyStyle.WrappedRequest, RequestFormat = WebMessageFormat.Json, ResponseFormat = WebMessageFormat.Json)] public void PostRequest(string comments) { // Do stuff // If everything went o.k. asynchronously render a page on the server. I do not want to // block the caller while this is occurring. BackgroundWorker myWorker = new BackgroundWorker(); myWorker.DoWork += new DoWorkEventHandler(myWorker_DoWork); myWorker.RunWorkerAsync(HttpContext.Current); } private void myWorker_DoWork(object sender, DoWorkEventArgs e) { // Set the current context so we can render the page via Server.Execute HttpContext context = (HttpContext)(e.Argument); HttpContext.Current = context; // Retrieve the url to the page string applicationPath = context.Request.ApplicationPath; string sourceUrl = applicationPath + "/log.aspx"; string targetDirectory = currentContext.Server.MapPath("/logs/"); // Execute the other page and load its contents using (StringWriter stringWriter = new StringWriter()) { // Write the contents out to the target url // NOTE: THIS IS WHERE MY ERROR OCCURS currentContext.Server.Execute(sourceUrl, stringWriter); // Prepare to write out the result of the log targetPath = targetDirectory + "/" + DateTime.Now.ToShortDateString() + ".aspx"; using (StreamWriter streamWriter = new StreamWriter(targetPath, false)) { // Write out the content to the file sb.Append(stringWriter.ToString()); streamWriter.Write(sb.ToString()); } } } Oddly, when the currentContext.Server.Execute method is executed, it throws an "object reference not set to an instance of an object" error. The reason this is so strange is because I can look at the currentContext properties in the watch window. In addition, Server is not null. Because of this, I have no idea where this error is coming from. Can someone point me in the correct direction of what the cause of this could be? Thank you!

  Read the article

• JQuery UI Tabs: Apply opacity toggle to only specific inner element?

  - by Kerri

  I am using Jquery UI tabs, and have it set to toggle the opacity with each slide change. I'm wondering if there's a way to apply the opacity toggle to only a single element within each tab, instead of the entire tab. My understanding of jQuery is pretty basic, so bear with me. So, If I have something like this: <div id="tabs"> <ul id="tabs-nav><li></li></ul> <div id="tab-1"> <img /> <p /> </div> <div id="tab-2"> <img /> <p /> </div> ...etc </div> How could I set it so that only the <img> has an effect applied, and the rest just switches normally? Here are the basics of the call I have for UI tabs: var $tabs = $('#slides').tabs({fx: { opacity: 'toggle' } }); $(".ui-tabs-panel").each(function(i){ //stuff to create previous/next links }); $('.next-tab, .prev-tab').click(function() { $tabs.tabs('select', $(this).attr("rel")); return false; });

  Read the article

• How to ship numpy with web2py application under myapp/modules?

  - by Newbie07

  I am having the following error while importing numpy from application/myapp/modules: Traceback (most recent call last): File "/home/mdipierro/make_web2py/web2py/gluon/restricted.py", line 212, in restricted File "D:/web2py_win/web2py/applications/myapp/controllers/default.py", line 13, in File "/home/mdipierro/make_web2py/web2py/gluon/custom_import.py", line 100, in custom_importer File "applications\myapp\modules\numpy\ __init__.py", line 137, in File "/home/mdipierro/make_web2py/web2py/gluon/custom_import.py", line 81, in custom_importer ImportError: Cannot import module 'add_newdocs' I tried adding 'application.myapp.modules.' in the 'import add_newdocs' statement of numpy\ __init.py__ and the error propagates to other subsequent imports(i.e. add_docs imports some other stuff and I get the ImportError again for these imports). So I narrowed down the problem to the "working directory" of the import statement. However, I do not wish to add 'application.myapp.modules.' in every import statement inside the package since it would be impractical and hard to edit if someone decides to rename the app later on. How do I make the import work smoothly? NOTE: It is necessary for me to put the numpy package in the app to ensure ease of deployment.

  Read the article

• Are Parameters really enough to prevent Sql injections?

  - by Rune Grimstad

  I've been preaching both to my colleagues and here on SO about the goodness of using parameters in SQL queries, especially in .NET applications. I've even gone so far as to promise them as giving immunity against SQL injection attacks. But I'm starting to wonder if this really is true. Are there any known SQL injection attacks that will be successfull against a parameterized query? Can you for example send a string that causes a buffer overflow on the server? There are of course other considerations to make to ensure that a web application is safe (like sanitizing user input and all that stuff) but now I am thinking of SQL injections. I'm especially interested in attacks against MsSQL 2005 and 2008 since they are my primary databases, but all databases are interesting. Edit: To clarify what I mean by parameters and parameterized queries. By using parameters I mean using "variables" instead of building the sql query in a string. So instead of doing this: SELECT * FROM Table WHERE Name = 'a name' We do this: SELECT * FROM Table WHERE Name = @Name and then set the value of the @Name parameter on the query / command object.

  Read the article

• Improve performance of searching JSON object with jQuery

  - by cale_b

  Please forgive me if this is answered on SO somewhere already. I've searched, and it seems as though this is a fairly specific case. Here's an example of the JSON (NOTE: this is very stripped down - this is dynamically loaded, and currently there are 126 records): var layout = { "2":[{"id":"40","attribute_id":"2","option_id":null,"design_attribute_id":"4","design_option_id":"131","width":"10","height":"10", "repeat":"0","top":"0","left":"0","bottom":"0","right":"0","use_right":"0","use_bottom":"0","apply_to_options":"0"}, {"id":"41","attribute_id":"2","option_id":"115","design_attribute_id":"4","design_option_id":"131","width":"2","height":"1", "repeat":"0","top":"0","left":"0","bottom":"4","right":"2","use_right":"0","use_bottom":"0","apply_to_options":"0"}, {"id":"44","attribute_id":"2","option_id":"118","design_attribute_id":"4","design_option_id":"131","width":"10","height":"10", "repeat":"0","top":"0","left":"0","bottom":"0","right":"0","use_right":"0","use_bottom":"0","apply_to_options":"0"}], "5":[{"id":"326","attribute_id":"5","option_id":null,"design_attribute_id":"4","design_option_id":"154","width":"5","height":"5", "repeat":"0","top":"0","left":"0","bottom":"0","right":"0","use_right":"0","use_bottom":"0","apply_to_options":"0"}] }; I need to match the right combination of values. Here's the function I currently use: function drawOption(attid, optid) { var attlayout = layout[attid]; $.each(attlayout, function(k, v) { // d_opt_id and d_opt_id are global scoped variable set elsewhere if (v.design_attribute_id == d_att_id && v.design_option_id == d_opt_id && v.attribute_id == attid && ((v.apply_to_options == 1 || (v.option_id === optid)))) { // Do stuff here } }); } The issue is that I might iterate through 10-15 layouts (unique attid's), and any given layout (attid) might have as many as 50 possibilities, which means that this loop is being run A LOT. Given the multiple criteria that have to be matched, would an AJAX call work better? (This JSON is dynamically created via PHP, so I could craft a PHP function that could possibly do this more efficently), or am I completely missing something about how to find items in a JSON object? As always, any suggestions for improving the code are welcome! EDIT: I apologize for not making this clear, but the purpose of this question is to find a way to improve the performance. The page has a lot of javascript, and this is a location where I know that performance is lower than it could be.

  Read the article

• How to get rid of the GUI access from shared library.

  - by Inso Reiges

  Hello, In my project i have a shared library with cross-platform code that provides a very convenient abstraction for a number of its clients. To be more specific, this library provides data access to encrypted files generated by main application on a number of platforms. There is a great deal of complicated code there that implements cryptographic protocols and as such is very error-prone and should be shared as much as possible across clients and platforms. However parsing all this encrypted stuff requires asking user for a number of different secrets ones in a while. The secret can be either a password, a number of shared passwords or a public key file and this list is a hot target for extension in the future. I can't really ask the user for any of those secrets beforehand from main application, because i really don't know what i need to ask for until i start working with the encrypted data directly in the library code. So i will have to create dialogs and call them from the library code. However i really see this as a bad idea, because (among other things) there is a possibility of a windows service using it and services can't have GUI access. The question is, are there any known ways or patterns to get rid of the GUI calls that are suitable for my case? Thank you.

  Read the article

• Core Data - How to check if a managed object's properties have been deallocated?

  - by georryan

  I've created a program that uses core data and it works beautifully. I've since attempted to move all my core data methods calls and fetch routines into a class that is self contained. My main program then instantiates that class and makes some basic method calls into that class, and the class then does all the core data stuff behind the scenes. What I'm running into, is that sometimes I'll find that when I grab a managed object from the context, I'll have a valid object, but its properties have been deallocated, and I'll cause a crash. I've played with the zombies and looked for memory leaks, and what I have gathered is it seems that the run loop is probably responsible for deallocating the memory, but I'm not sure. Is there a way to determine if that memory has been deallocated and force the core data to get it back if I need to access it? My managedObjectContext never gets deallocated, and the fetchedResultsController never does, either. I thought maybe I needed to use the [managedObjectContext refreshObject:mergeData:] method, or the [managedObjectContext setRetainsRegisteredObjects:] method. Although, I'm under the impression that last one may not be the best bet since it will be more memory intensive (from what I understand). These errors only popped up when I moved the core data calls into another class file, and they are random when they show up. Any insight would be appreciated. -Ryan

  Read the article

• Memory Bandwidth Performance for Modern Machines

  - by porgarmingduod

  I'm designing a real-time system that occasionally has to duplicate a large amount of memory. The memory consists of non-tiny regions, so I expect the copying performance will be fairly close to the maximum bandwidth the relevant components (CPU, RAM, MB) can do. This led me to wonder what kind of raw memory bandwidth modern commodity machine can muster? My aging Core2Duo gives me 1.5 GB/s if I use 1 thread to memcpy() (and understandably less if I memcpy() with both cores simultaneously.) While 1.5 GB is a fair amount of data, the real-time application I'm working on will have have something like 1/50th of a second, which means 30 MB. Basically, almost nothing. And perhaps worst of all, as I add multiple cores, I can process a lot more data without any increased performance for the needed duplication step. But a low-end Core2Due isn't exactly hot stuff these days. Are there any sites with information, such as actual benchmarks, on raw memory bandwidth on current and near-future hardware? Furthermore, for duplicating large amounts of data in memory, are there any shortcuts, or is memcpy() as good as it will get? Given a bunch of cores with nothing to do but duplicate as much memory as possible in a short amount of time, what's the best I can do?

  Read the article

• max file upload size change in web.config

  - by Christopher Johnson

  using .net mvc 3 and trying to increase the allowable file upload size. This is what I've added to web.config: <system.webServer> <validation validateIntegratedModeConfiguration="false"/> <modules runAllManagedModulesForAllRequests="true"> <add name="ErrorLog" type="Elmah.ErrorLogModule, Elmah" preCondition="managedHandler" /> <add name="ErrorMail" type="Elmah.ErrorMailModule, Elmah" preCondition="managedHandler" /> <add name="ErrorFilter" type="Elmah.ErrorFilterModule, Elmah" preCondition="managedHandler" /> </modules> <handlers> <add name="Elmah" path="elmah.axd" verb="POST,GET,HEAD" type="Elmah.ErrorLogPageFactory, Elmah" preCondition="integratedMode" /> </handlers> <security> <requestFiltering> <requestLimits maxAllowedContentLength="104857600"/> </requestFiltering> </security> *ignore the elmah stuff. it's still not allowing file sizes larger than 50MB and this should allow up to 100MB no? any ideas?

  Read the article

• iphone - using NSInvocation: constant value

  - by Mike

  I am dealing with an old iPhone OS 2.x project and I want to keep compatibility, while designing for 3.x. I am using NSInvocation, is a code like this NSInvocation* invoc = [NSInvocation invocationWithMethodSignature: [cell methodSignatureForSelector: @selector(initWithStyle:reuseIdentifier:)]]; [invoc setTarget:cell]; [invoc setSelector:@selector(initWithStyle:reuseIdentifier:)]; int arg2 = UITableViewCellStyleDefault; //???? [invoc setArgument:&arg2 atIndex:2]; [invoc setArgument:&identificadorNormal atIndex:3]; [invoc invoke]; to call 3.0 APIs on 2.0. I am having a problem on the line I marked with question marks. The problem there is that I am trying to assing to arg2, a constant that has not been defined in OS 2.0. As everything with NSInvocation is to do stuff indirectly to avoid compiler errors, how do I set this constant to a variable in an indirect way? Some sort of performSelector "assign value to variable"... is that possible? thanks for any help.

  Read the article

< Previous Page | 379 380 381 382 383 384 385 386 387 388 389 390  | Next Page >