Search Results

Search found 15651 results on 627 pages for 'setup'.

Page 383/627 | < Previous Page | 379 380 381 382 383 384 385 386 387 388 389 390  | Next Page >

• Raidz in FreeNAS eating more space than expected

  - by swood

  I just got 6 new 2TB drives, and added them to my FreeNAS box. I have only dealt with RAID1 previously, and each setup has given what I was expecting. However, with the 6*2TB drives, I wanted to maximize the space available, so I went with raidz. But I seem to be missing space. I have 8.6TB available after the raidz was built. Maybe I did my math horribly wrong, but (N-1) x S(min) (where N=6 and S(min)=2TB) should result in 10TB. (I understand it would be more like 9.something) Does raidz actually consume more then 1 drive worth of space? Or could their possibly be another problem? (All drives have been independently verified that 2TB of space is available)

  Read the article

• setting my mysql server - limiting domains that can connect

  - by Alex

  I am trying to setup a mysql server on my machine. I would like to limit the domains that it listens for connections to. My understanding is that you can either have it listen to 1 ip or all ip's. Therefore, if i want to connect remotely I have to say all ips. Then I would like to block all domains but the ones I know should actually be connecting.. I believe this is done through windows firewall. However, how do i do this by domain instead of IP?

  Read the article

• How to NFSv4 share a ZFS file system on FreeBSD?

  - by Sandra

  Using FreeBSD 9, and created a ZFS file system like so zfs create tank/project1 zfs set sharenfs=on tank/project1 There are many howto's on setting up NFSv3 on FreeBSD on the net, but I can't find any one NFSv4 and when the NFS share is done with ZFS. E.g. this howto say I have to restart the (NFSv3) by nfsd -u -t -n 4, but I don't even have nfsd. When I do # echo /usr/ports/*/*nfs* /usr/ports/net-mgmt/nfsen /usr/ports/net/nfsshell /usr/ports/net/pcnfsd /usr/ports/net/unfs3 /usr/ports/sysutils/fusefs-chironfs /usr/ports/sysutils/fusefs-funionfs /usr/ports/sysutils/fusefs-unionfs # I don't see any NFSv4 servers, which I could install with pkg_add. Question How do I install and setup NFSv4, so I can mount the share from e.g. a Linux host?

  Read the article

• Can I extend my total RAM by buying more, and what kind do I need to buy

  - by Xeon06

  I currently have 4 GB total RAM and I would like to get some more, to bring it to a total of 8 GB. Is it possible to simply buy another 4 GB and bring it to 8? If so, what kind should I be buying? There is a lot of different possibilities, DDR3, DDR2, clock speed, etc. I am kind of lost among all this. My current setup goes like this: ACER EG43M mainboard Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz 4 total RAM slots, 2 occupied by 2 GB sticks According to CPU-Z, my memory type is DDR3 (not sure how reliable that is) Full CPU-Z dump Windows 7 64-bit So basically, I want to know whether it's possible to extend my current RAM to get 8 GB total by buying another 4, and if so, what kind of RAM do I need? Note that I am not looking for shopping recommendations. I'm worried about the hardware compatibility.

  Read the article

• Is there a "pattern" or a group that defines *rc files in *nix environments?

  - by Somebody still uses you MS-DOS

  I'm starting to use command line a little more, and I see there are a lot of ways to configure some config files in my $HOME. This is good, since you can customize it the way you really like. Unfortunately, for begginners, having too many options is a little confusing. For example, I created .bash_alias for some alias I'm using. I didn't even know this option existed, I'm used to simply edit .bashrc. Do exist a pattern, a "good practice", envisioning flexibility and modularity in terms of rc files structure? Do exist a standardization group for this, or every body just creates it's own configuration setup?

  Read the article

• Cleaning cruft from the stored configs database

  - by Zoredache

  I have setup stored configuration primarily as a method to manage my ssh known_hosts. Unfortunately as I retire hosts the old configs still exist in my database. The answer seems to be run the command puppet node clean <hostname>. The problem is that while this does command does run, and does clean up some data, it doesn't seem to clean up everything. For example I can still find values in the puppet_tags table that only applied to a hosts that no longer exists. What should I be doing to keep my stored configuration database clean of all extra junk that seems to be building up? P.S. Can anyone point me any documentation for the stored configuration schema?  If I could find good documentation, or at least an entity-relationship-diagram, I would be tempted to just do some manual clean-up.

  Read the article

• Enable [command] key to register as something other than just [ctrl]?

  - by gojomo

  I'm running 10.04LTS inside VMWare Fusion on a Mac. The [command] key (aka [windows] on many keyboards) is almost always behaving as if it was [ctrl], even though I done anything explicit to request that behavior. In fact, in SystemPreferencesKeyboardLayoutsOptionsAlt/Win key behavior, 'default' is chosen (rather than the 'Control is mapped to Win keys' option). However, choosing other options there do not seem to change the handling of [command], at least not as tested in the SystemPreferenceKeyboard Shortcuts app. (No matter what I've tried, [command]-x is always detected as [Ctrl]-x in that app.) I've tried: various options under SystemPreferencesKeyboardLayoutsOptionsAlt/Win key behavior toggling the VMWare Fusion Preferences KKeyboard & Mouse Key Mappings setup which claims to map '[command]' to '[windows]', and restarting the VM in each position the xmodmap lines suggested at https://help.ubuntu.com/community/MappingWindowsKey And yet, it's clear that all Ubuntu apps aren't merging [ctrl] and [command], because in 'Terminal', [shift]-[ctrl]-c will Copy, but [shift]-[command]-c will not. If the [command]/[windows] key was recognized as anything else ('Super', 'Meta', 'Hyper'? I don't care as long as it's not 'Control'), then I could achieve my real goal (which happens to be enabling CMD-based cut/copy/paste in PyCharm, while leaving CTRL-X/etc available for emacs-like bindings). I think any solution which manages to make [command]-x appear as something other than [ctrl]-x in PreferencesKeyboard Shortcuts will probably do the trick.

  Read the article

• trying to set up wireless router, failing

  - by j j

  Hi, I am trying to set up Netgear's wireless-n WNR2000 router, following their oversimplified 5- step process for plugging in wires, and I'm not having any success. It comes down to: once everything is wired and turned on in the correct order, all of the LEDs match the image they give of 'what should be lit up', but their setup disk still doesn't find the router. They have a site to set up the router manually, www.routerlogin.net, which I cannot navigate to, even while wired directly to the router. http://192.168.1.1 doesn't connect to anything, either. The interesting part: i get ping replies from Google's DNS server at 8.8.8.8 while this is set up. but cannot connect to any web site by name, since the router's DNS isn't set up. One thought is that the router and modem both have the same IP address, so it's conflicting, but I'm not sure how I'd resolve that. Any ideas?

  Read the article

• Can I proxy my no-ip domain using a .htaccess file on my hosted domain?

  - by Dean

  I have a domain http://www.example.com which has a hosting package and website on it. I also have a http://example.no-ip.org domain which contains some content I would like to appear under the same domain. Can I setup a .htaccess file at http://www.example.com/proxy/ which proxies the files at http://www.example.no-ip.org/files/ Similarly, could I host an entire domain in the same way?, e.g. http://www.example2.com/ proxying http://example.no-ip.org/files2/ Alternatively, if someone were to say "That's stupid, use this free (or super-cheap) dynamic DNS host:" I would probably accept that answer.

  Read the article

• Is there a postfix mysql virtual_maps append_at_origin workaround so I can pipe to external scripts?

  - by FilmJ

  I am using virtual domains, and I'd like to setup the server to alias to custom scripts. I manage all accounts using postfix mappings to mysql. It seems that postfix automatically appends a virtual domain regardless of how the forwarded/aliased result comes back. So even though i have: "|/bin/command" postfix is reading it as: "|/bin/command"@mydomain.com Is there any work-around, or setting I can fix? It would seem than append_at_myorigin=no would be ideal, but that's unsupported according to the documentation. Another option, maybe I can skip virtual aliases altogether and use the "/etc/postfix/aliases" table - assuming all emails go to the main domain. I'll try this, but if anyone has any other ideas how to make it work with virtual domains, please let me know as this would be very useful! Thanks.

  Read the article

• USB 3.0 hub; what can it power?

  - by pouzzler

  I own an Asus UX31A laptop, equipped with 2 USB 3.0 ports. I would like to connect several USB devices to one of these ports, using a USB 3.0 hub. 1) Am I correct in assuming the Asus "USB Charger+" commercial blurb corresponds to the USB 3.0 standard "Battery Charging Specification 1.2", and furthermore inferring that the laptop can deliver 1.5A through a USB port? 2) Does a powered external USB 3.0 hard drive draw on the USB power lines? 3) I would like to connect the aforementionned drive, an android phone, and a 200mA rated optical mouse to an unpowered USB 3.0 hub, itself plugged into the laptop. Should my above assumptions be false, would this setup be able to power all three devices? Thanks to the usb guru who'll settle my fears to rest. Best regards, Sébastien

  Read the article

• how to monitor traffic at port 53 (DNS)

  - by Registered User

  I am a bit confused with the abundant tcpdump tutorials on internet. I am having a few of the virtual machines running on a virtualization server.Where I am debugging a problem.Port 53 is the one in problem. I have a bridged setup where out of 4 LAN cards on the machine in question one is active and it is xen-br0 I want to check if there is any request coming on port 53 on the server by other machines on LAN in question. I also want to see if the guest operating systems on LAN or any other machine is sending traffic at port 53.Due to abundant messages being generated via tcpdump I am finding it difficult to grep the output at desired port. So how can I use it if some one can give an example that would be helpful. Thanks in advance.

  Read the article

• Apache on Windows in production environment? Why not?

  - by tillda

  "Everyone" know that Apache is for Linux/Unix and on Windows IIS is the way to go. However, I'm not a pro at Linux and it would be an enormous relief for me to use just the same setup in the production environment that I use during development. I'm a solo developer and I'm trying to make things as simple as possible. I've already got rid of other issues like storage (-cloud) emails (-postmark). So, what are the real drawbacks that can happen when I just put Apache in Windows virtual private server from Rackspace and use it as the main production environment for a PHP project? Money for more VPS resources is not that big issue compared to the possibility of not having to learn a different OS. Super-heavy traffic is not expected. Also my PHP project can be quite optimized. There are some heavy scripts, but only for the inside (logged) users. All else can be served more or less statically.

  Read the article

• Masquerade traffic from certain source IP to VPN connection

  - by Shuo Ran

  Network Setup: 10.0.0.1 Router: to internet 10.0.0.70 Server: Ubuntu based server,default gateway is 10.0.0.1 10.0.0.51 PC I created a PPTP connection(interface: ppp0) on Server to a machine on the internet, what I want to do is route all the traffic from certain IP address(10.0.0.51) through the PPTP connection and then to the internet. What I did are: Set the gateway on PC(10.0.0.51) as 10.0.0.70 Enabled ipv4 forward on 10,0,0,70 Add the masquerade rule to iptable: iptables -t nat -A POSTROUTING -o ppp0 -s 10.0.0.51 -j MASQUERADE After that, it seems none of the traffic from 10.0.0.51 be redirected to ppp0, instead these traffic are still going through 10.0.0.1 directly. Any thoughts on it?

  Read the article

• Lighttpd based server issues crop up when port forwarding

  - by michael

  I have four host computers running lighttpd webservers. they are sitting behind a hspa modem, which each occupying a http port between [81 - 84]. 80 is taken by the modem itself. The port forwarding is setup correctly, however, only a portion of any webpage I request from any of the hosts comes through (they all fails after %20 of the page). If I put the host on port 81 into the dmz, it serves pages fine. The others do not respond to the dmz treatment. Is it possible the web content on the hosts somehow require ports aside from their respective http port? Or is it possible that even though the server.port in the lighttpd_ssl.conf file is set, the individual hosts are still expecting to serve on port 80? I am not familiar with lighttpd, nor did i set them up. they are running on video encoders i purchased. I can grab any files from them required for further information on the problem.

  Read the article

• How does the performance of pure Nginx compare to cpNginx?

  - by jb510

  There is now a Cpanel plugin to fairly easily setup Nginx as a reverse proxy on a Cpanel/Apache server. I've been simultaneously interested in setting up my first unmanaged VPS and my first Nginx server and as a masochist figured why not combine the two. I'm wondering however if it's worth setting up a pure Nginx server vs trying out cpNginx on Apache? My goal is solely to host WordPress sites and while what I've read raves about Nginx's is exceptional ability serving static at least as a reverse proxy, I am unclear if there is substantial benefit to running a pure nginx with eAccelorator over cpNginx on Apache for dynamic sites? Regardless I'll be running W3TC on all sites to cache content, but am still interested if there are big CPU reductions running PHP scripts under pure Nginx over cpNginx?

  Read the article

• Hyper-v back-up

  - by Ddave23

  We are trying to decide a good backup strategy for our new Hyper-V setup. We have 3 VMs on Windows 2008 R2 Hyper-V host. We installed Symantec BackupExec 2010 on the host and have the Hyper-V Agent installed. We would like to perform a full backup at night to tape, and an incremental twice a day to a daily tape. Our environment needs constant protection for our database (Microsoft Access). Any thoughts? Should I be looking at different software?

  Read the article

• Equalizing Agent and Master Nagios on state change alone

  - by punith

  We have a setup where there are distributed Nagios running on multiple sites and are equalizing their data to the main Nagios server. The problem is it sends back the data to main Nagios server no matter if there is a state change in host or service. Is it possible to configure the slave Nagios to check the service/Host every 5 sec but send back the data only if there is a state change. Currently it is implemented by Obsess Over Hosts/Service which always runs the command which will equalize. Nagios version is 3 I am no administrator but a developer so I don't know the exact jargon so please bare with me.

  Read the article

• A GFX card with two DVI and one HDMI with audio?

  - by TomaszRykala

  I haven't upgraded my PC for a while nor kept up to date with pc hardware since 2007, but have recently come up with a requirement and I am wondering if I can solve it! Are there any graphics cards out there that have two DVIs and one HDMI output, with the HDMI supporting sound over it? Basically, I've got a two PC monitor setup, and both monitors are connected to the two DVI's of my GTX9800+. I want to upgrade my card to say, GTX 460, but can't find if there is such with two DVIs (for my monitors) and one HDMI with audio (for my TV). So I am wondering, if such solution possible at all? I noticed that there are some cards out there with two DVI's and one mini-HDMI, but they all say 'HDMI Output Yes x 1 (via DVI to HDMI adaptor x 1 )', which probably means that because of the DVI element, the audio won't work. Is this true? Such card is an exmaple: http://uk.asus.com/Graphics_Cards/NVIDIA_Series/ENGTX460_DirectCU2DI1GD5/#specifications Many thanks for your help!

  Read the article

• VPS with Debian Squeeze cannot forwward email - Name service error for name=gmail.com type=MX: Host not found, try again

  - by Domagoj

  I have postfix set-up on my Debian VPS, I can: send emails receive emails on my server But forwarding emails from my server to gmail does not work! I configured google's DNS through /etc/resolv.conf I can ping google.com and with dig I also find gmail MX records. But when my server tries to forward email to gmail (setup with /etc/aliases) I get the following error: postfix/smtp[20280]: 825E117BA8A80: to=<[email protected]>, orig_to=<[email protected]>, relay=none, delay=40, delays=0/0.01/40/0, dsn=4.4.3, status=deferred (Host or domain name not found. Name service error for name=gmail.com type=MX: Host not found, try again) What am I missing? Any help will be greatly appreciated!

  Read the article

• What is the procedure to replace a failing hard drive in a RAID array?

  - by slayton

  3 years ago a co-worker setup a software RAID-6 array on Ubuntu 9.04 and I'm getting messages from the OS that the drive has bad sectors and should be replaced. I'd like to remove this drive and replace it with a new drive, however, I have never done this before and I'm terrified that in the process of fixing the array I'm going to end up ruining it. I know the device ID of the array and I know the device IDs of the individual drives in the array. Additionally I physically have the bad drive. What are the steps to replace the bad drive with a new drive and get the array running again?

  Read the article

• Installing Ubuntu on an External Drive

  - by Dom

  I am trying to install ububtu on an external drive. I am a programmer who wants to start using Linux. I downloaded the usb installer from the ubuntu website and followed all the steps. But when I get to the part where I have to setup the partitioning, it says an error when moving forward "No root file system is defined". I've been doing some research and I think that I have to partition the external drive but do not know how to do so. The problem is that I only want 20gb used from that external drive and let the rest be used for storage. I am also a musician and use Pro tools so I would like to keep all my files there, but I dont want ubuntu on my main hardrive since the external one is portable. I'd appreciate it also if you could provide me the steps.

  Read the article

• Deploy multiple django instances on one Host [migrated]

  - by tvn

  I am trying to setup multiple Django instances on one Host with lighttpd. My problem is to get Djangos FCGI working on subdirectories served by my Webserver. So my aim is the following: www.myhost.org/django0 - django1.fcgi on localhost:3000 www.myhost.org/django1 - django2.fcgi on localhost:3001 www.myhost.org/django2 - django3.fcgi on localhost:3002 Unfortunately the following configuration doesn't even work for one: $HTTP["url"] =~ "^/django0/static($|/)" { server.document-root = "/home/django0/django/static/" } $HTTP["url"] =~ "^/django0/media($|/)" { server.document-root = "/usr/lib/python2.7/dist-packages/django/contrib/admin/media/" } $HTTP["url"] =~ "^/django0($|/)" { proxy.server = ( "" => ( ( "host" => "127.0.0.1", "port" => "3001", "check-local" => "disable", ) ) ) } The only response I get is an 404 and even this takes a long time till I get this. I found nothing suspicious neither in the access.log nor in the error.log.

  Read the article

• Need hosting (e-mail, http) for external domains

  - by disappointed

  This may not be the right place, but since it is a more technical aspect of the hosting world, I am taking the liberty to ask: I'm currently running a virtual server with nginx and postfix for web and e-mail, but I can't handle the administration and, due to frequent problems with e-mail services, I need to resolve this with a almost-standard hosting package (anything should work, even 5 MB static files would be OK). The exception being that I would like to use several domains, hosted with different registrars, for web and e-mail. Currently, this is a very simple configuration in my setup. All hosters I have looked at seem to think this a costly business (more than domain registration costs), but of course the recommend to transfer domains to them (they want the $$). Does anyone know of a hosting company that allows its customers to freely manage domains registered somewhere else?

  Read the article

• Safari 4.0.5 will not play any HTML5 (H.264) video

  - by user34407

  The html5test.com tells me that my browser does not support the <video> element, and when I try example page, I get the fallback message, usually "Your browser does not support HTML5 video." I know this should work in Safari. I am on Windows 7, 64-bit (running 32-bit Safari). Video works in Safari for everyone else in the office. (Windows 7 setup exactly like mine, Vista, OSX.) I have tries uninstalling, deleting all user preferences, and reinstalling. Anything else I should try?

  Read the article

< Previous Page | 379 380 381 382 383 384 385 386 387 388 389 390  | Next Page >