Search Results

Search found 14206 results on 569 pages for 'compressed folder'.

Page 385/569 | < Previous Page | 381 382 383 384 385 386 387 388 389 390 391 392  | Next Page >

• Disk failure is imminent Laptop Hard drive ~5 months old

  - by Drew

  There's another post about this, but I don't have enough 'points' to say anything on that thread. So I'll start my own ... with more details! My computer still boots, but gnome domain reports problems with HDD smart. This has been confirmed in the bios as it makes me press f1 to boot up now. I tried running HDD disk check in the bios, but it fails running the tests. As in, running the tests failed not that the tests themselves indicated a failed drive. Here is what disk utility is reporting as failing: Reallocated Sector Count FAILING Normalized: 132 Worst: 132 Threshold: 140 Value: 544 Current Pending Sector Count WARNING Normalized: 200 Worst: 1 Threshold: 0 Value: 2 Is this related to the insane number of DRDY errors on the drive? kernel: [51345.233069] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 kernel: [51345.233076] ata1.00: BMDMA stat 0x4 kernel: [51345.233081] ata1.00: failed command: READ DMA kernel: [51345.233090] ata1.00: cmd c8/00:00:00:8b:4a/00:00:00:00:00/e0 tag 0 dma 131072 in kernel: [51345.233092] res 51/40:00:a8:8b:4a/10:04:00:00:00/e0 Emask 0x9 (media error) kernel: [51345.233097] ata1.00: status: { DRDY ERR } kernel: [51345.233103] ata1.00: error: { UNC } kernel: [51345.291929] ata1.00: configured for UDMA/100 kernel: [51345.291944] ata1: EH complete kernel: [51347.682748] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 kernel: [51347.682754] ata1.00: BMDMA stat 0x4 kernel: [51347.682759] ata1.00: failed command: READ DMA kernel: [51347.682768] ata1.00: cmd c8/00:00:00:8b:4a/00:00:00:00:00/e0 tag 0 dma 131072 in kernel: [51347.682770] res 51/40:00:a8:8b:4a/10:04:00:00:00/e0 Emask 0x9 (media error) kernel: [51347.682774] ata1.00: status: { DRDY ERR } kernel: [51347.682777] ata1.00: error: { UNC } Did Ubuntu 10.10 and/or EXT4 eat my work laptop? What steps can I take to backup my important information, which is probably the home folder. Please include steps to recover my data on the new hard drive as well. It does me little good to have backups I can't use.

  Read the article

• Backup Failed, need help not failing

  - by Costa

  Backup (Deja Dup) failed to do an initial backup to my Amazon S3, and despite my best Googling efforts, I could not find a solution : ( Here's the error message: BackendException: Error uploading s3+http://deja-dup-auto-akiaiksyiqi3buaaz26a/My-Archive/duplicity-full.20130805T143807Z.vol1.difftar.gpg I'm running Ubuntu 12.04 LTS on a System76. The folder I'm trying to backup to in S3 is set to store as Amazon Glacier Storage. Any help would rock! Update: better debugging info: DUPLICITY: . Failed to create bucket (attempt #1) 'deja-dup-auto-axxxxxxxxxxxa' failed (reason: S3ResponseError: S3ResponseError: 403 Forbidden DUPLICITY: . <?xml version="1.0" encoding="UTF-8"?> DUPLICITY: . <Error><Code>SignatureDoesNotMatch</Code><Message>The request signature we calculated does not match the signature you provided. Check your key and signing method.</Message><StringToSignBytes>47 00 54 0a 0a 0a 4d 6f 6e 00 20 30 35 20 00 75 67 20 32 30 31 00 00 35 00 32 34 3a 31 32 20 47 4d 00 0a 2f 64 65 6a 61 2d 64 75 70 2d 61 75 74 6f 2d 61 6b 69 00 6b 73 79 69 71 69 33 62 75 61 00 7a 32 36 61 2f</StringToSignBytes><RequestId>8000000000003</RequestId><HostId>Uxxxxxxxxxxxxxxxxx/xxxxxxxxxxxxxxxxRF</HostId><SignatureProvided>yxxxxxxxxxxxxxxxxxxxxx</SignatureProvided><StringToSign>GET

  Read the article

• how to make a php crontab silent

  - by BandonRandon

  I set up a crontab in Cpanel to run every min. It's working great but I don't want an e-mail every min. I have a second cron tab that runs every day. I would like the responce of this tab. Is there a way to tell the crontab to be silent or only e-mail on error? I have: * * * * * php /home/public_html/folder/file.php 2>&1 The last bit 2>&1 I added because i thought it would make it silent. From the Cpanel Docs: You can have cron send an email everytime it runs a command. If you do not want an email to be sent for an individual cron job you can redirect the command's output to /dev/null like this: mycommand /dev/null 2&1

  Read the article

• Stopping local drive mappings from transfering to a RDP session

  - by Chad

  We have a SQL server that locally has about 6 physical drives mapped. However let's say G: is a mount point to the SAN, if I connect with my local machine and have a personal folder mapped locally as g:\userdata that transfers to the remote desktop session on the server overwriting the value of the 'NAME' of the share. Here is the kicker, the G: on the server still has the right information but has the wrong label coming from the share on my PC. Does anyone know how to prevent this from happening? My tick box for local resources is unchecked in my Microsoft RDP client.

  Read the article

• Outlook.com custom domain, Exchange ActiveSync too many connected devices

  - by Mike C.

  I just setup Outlook.com to run on a custom domain. The web interface works well but when I connect it to Outlook 2013 I get the following error: There are too many devices syncing with this account. To sync using Outlook, try removing another device that is connected with this account such as a phone or another computer. File: outlook\pstprx\storeas\utils\airsyncstatuscodes.h Line: 88 HTTP/1.1 200 OK FolderStatus: 177 To re-try press F9... Error Code: 0x80004005 I've done my home work, using Google, and found that it is often due to having 3 or 4 devices connected to an account with 50+ folders. My account is empty, no email or folder, and is not synced with any devices, I confirmed that on http://devices.live.com. I'm out of option, any help would be greatly appreciated! Thank you

  Read the article

• SQL Maintenance Cleanup Task Working but Not Deleting

  - by Alex

  I have a Maintenance Plan that is suppose to go through the BACKUP folder and remove all .bak older than 5 days. When I run the job, it gives me a success message but older .bak files are still present. I've tried the step at the following question: SQL Maintenance Cleanup Task 'Success' But not deleting files Result is column IsDamaged = 0 I've verified with the following question and this is not my issue: Maintenance Cleanup Task(s) running 'successfully' but not deleting back up files. I've also tried deleting the Job and Maintenance Plan and recreating, but to no avail. Any ideas?

  Read the article

• Is the output of Eclipse's incremental java compiler used in production? Or is it simply to support Eclipse's features?

  - by Doug T.

  I'm new to Java and Eclipse. One of my most recent discoveries was how Eclipse comes shipped with its own java compiler (ejc) for doing incremental builds. Eclipse seems to by default output incrementally built class files to the projRoot/bin folder. I've noticed too that many projects come with ant files to build the project that uses the java compiler built into the system for doing the production builds. Coming from a Windows/Visual Studio world where Visual Studio is invoking the compiler for both production and debugging, I'm used to the IDE having a more intimate relationship with the command-line compiler. I'm used to the project being the make file. So my mental model is a little off. Is whats produced by Eclipse ever used in production? Or is it typically only used to support Eclipse's features (ie its intellisense/incremental building/etc)? Is it typical that for the final "release" build of a project, that ant, maven, or another tool is used to do the full build from the command line? Mostly I'm looking for the general convention in the Eclipse/Java community. I realize that there may be some outliers out there who DO use ecj in production, but is this generally frowned upon? Or is this normal/accepted practice?

  Read the article

• Script/tool to import series of snapshots, each being a new revision, into Subversion, populating source tree?

  - by Rob

  I've developed code locally and taken a fairly regular snapshot whenever I reach a significant point in development, e.g. a working build. So I have a long-ish list of about 40 folders, each folder being a snapshot e.g. in ascending date YYYYMMDD order, e.g.:- 20100523 20100614 20100721 20100722 20100809 20100901 20101001 20101003 20101104 20101119 20101203 20101218 20110102 I'm looking for a script to import each of these snapshots as a new subversion revision to the source tree. The end result being that the HEAD revision is the same as the last snapshot, and other revisions are as numbered. Some other requirements: that the HEAD revision is not cumulative of the previous snapshots, i.e., files that appeared in older snapshots but which don't appear in later ones (e.g. due to refactoring etc.) should not appear in the HEAD revision. meanwhile, there should be continuity between files that do persist between snapshots. Subversion should know that there are previous versions of these files and not treat them as brand new files within each revision. Some background about my aim: I need to formally revision control this work rather than keep local private snapshot copies. I plan to release this work as open source, so version controlling would be highly recommended I am evaluating some of the current popular version control systems (Subversion and GIT) BUT I definitely need a working solution in Subversion. I'm not looking to be persuaded to use one particular tool, I need a solution for each tool I am considering as I would also like a solution in GIT (I will post an answer separately for GIT so separate camps of folks who have expertise in GIT and Subversion will be able to give focused answers on one or the other). The same question but for GIT: Script/tool to import series of snapshots, each being a new edition, into GIT, populating source tree? An outline answer for Subversion in stackoverflow.com but not enough specifics about the script: what commands to use, code to check valid scenarios if necessary - i.e. a working script basically. http://stackoverflow.com/questions/2203818/is-there-anyway-to-import-xcode-snapshots-into-a-new-svn-repository

  Read the article

• What do I need to develop a PHP extension in lampp?

  - by Fernando Costa

  Actually I'm dealing with a trouble in my system, I have to delivery the system to clients and it was built in PHP, JS, ShellScript and SQL. I would like to encrypt the code or obfuscate it from eyes of others! Then someone from the community told me about build my own PHP extension, it sounds to me as a great idea, since it will not be with the main code of the system. But I have a problem doing this way, if a programmer get in the extensions and find it, all the hard work has gone. Then I'm here to ask again about this matter. What is the best way to hide my Business Logic from third parties? I know that has stuffs like IonCube, Zend Guard, and many others. But I'm looking something that I can build myself. Is PHP extension the right way to follow? Or some Half SaaS system, with dependencies (Business Logic) in a remote server? About the environment OS: Kernel Linux 2.6.37.1-1.2 - LAMPP (Apache 2.2, MySQL 5.5 PHP 5.3.8) In php generally the extension is located at /php/ext/ but in lampp I have no idea where it is, I just found a folder /opt/lampp/lib/php/extensions/ is that right place?

  Read the article

• Data transfer between "main" site and secured virtual subsite

  - by Emma Burrows

  I am currently working on a C# ASP.Net 3.5 website I wrote some years ago which consists of a "main" public site, and a sub-site which is our customer management application, using forms-based authentication. The sub-site is set up as a virtual folder in IIS and though it's a subfolder of "main", it functions as a separate web app which handles CRUD access to our customer database and is only accessible by our staff. The main site currently includes a form for new leads to fill in, which generates an email to our sales staff so they can contact them and convince them to become customers. If that process is successful, the staff manually enter the information from the email into the database. Not surprisingly, I now have a new requirement to feed the data from the new lead form directly into the database so staff can just check a box for instance to turn the lead into a customer. My question therefore is how to go about doing this? Possible options I've thought of: Move the new lead form into the customer database subsite (with authentication turned off). Add database handling code to the main site. (No, not seriously considering this duplication of effort! :) Design some mechanism (via REST?) so a webpage outside the customer database subsite can feed data into the customer database How to organise the code for this situation, preferably with extensibility in mind, and particularly are there any options I haven't thought of?

  Read the article

• How can I install Celtx 2.9.7 properly on Ubuntu 12.04 LTS?

  - by cruxfilm

  I am new to Ubuntu and Linux and I want to install and use the newest version of the screenwriting software Celtx on Ubuntu 12.04 LTS. After trying https://answers.launchpad.net/ubuntu/+source/ubiquity/+question/206295 and using sudo add-apt-repository ppa:dreamstudio/video sudo apt-get update sudo apt-get install celtx I unfortunately had to find out that was a rather old version with a fairly screwed up UI. I then downloaded the newest version from http://download.celtx.com/2.9.7/Celtx-2.9.7-64.tar.bz2 but now I don't know how to properly install it. I extracted it to /home/username/ (there was no ~/bin/) as described here and I can now launch the application by running the file celtx within that folder (I get asked whether I want to Display, run or run it in Terminal) and it works fine. But I can't get it to launch from Unity. I tried right-clicking the launcher button and going "Lock to Launcher" while it's running and it does create an icon but clicking it to launch the program does nothing. Also searching for celtx in the Dash doesn't find the app. And advice on how to properly install Celtx 2.9.7 in Ubuntu 12.04 LTS?

  Read the article

• WiFi can't reconnect after suspend/hibernate on Ubuntu 12.04.1

  - by CyberOPS

  I've had this problem since Ubuntu 11.10 (my first install) but I was able to get around this issue with this answer. When I updated to Ubuntu 12.04 I encrypted the home folder, so I wasn't able to suspend or hibernate anymore (disappointing :l). Because of this and another issue I had1, I chose to reinstall. Sometime after I reinstalled, I was reminded about reconnection issue because it wasn't working after I suspended. I tried to use the same fix as before but I couldn't get it to work. I've also tried a couple other different fixes I found around the web but they didn't work. Since I'm new to linux, I'm gonna have a tough time figuring this out by myself. So does anyone know how, or what I need to figure out how, to fix this? Info: Computer: HP Pavilion dv6t-6b00 CTO Quad Edition Entertainment Notebook PC Network Card: Intel® Centrino® Wireless-N 1000 OS: Ubuntu 12.04.1 (x64) dual booting with Windows 7 (x64) (Not using Wubi) Wireless Card Driver: Intel Wireless WiFi Link drivers for Linux (iwlwifi) 1 - ntfs-config caused colord to crash on startup, even after NTFS-Config was removed.

  Read the article

• Pointing Domain to VDS Directory

  - by Jonathan Sampson

  I've got a domain name that is managed through 000Domains.com. I also have a virtual dedicated server hosted with GoDaddy.com. Within my VDS, I created a folder /mysite and placed all of my website files there. I can test this through the ipaddress of my VDS, but I would now like to point my domain from 000Domains over to my sub-directory hosted on GoDaddy. How do I do this? Do I need to make any specific modifications to my VDS to inform it that one of the directories will be accessible from a domain name? I have access to Simple Control Panel, if that is of any relevance.

  Read the article

• Dual boot Win 7 Ubuntu - home and boot partitions have no mount point

  - by cwmff

  After installing Ubuntu 12.04.3 on a Windows 7 laptop, running Ubuntu Disk Utility showed the following partition information; /dev/sda1 NTFS, Bootable, Filesystem, Labled: System Reserved, 105MB, Not Mounted /dev/sda2 NTFS, no flag, Filesystem, no label, 84GB, Not Mounted /dev/sda3 Usage: Container for logical partitions. Partition Type: Extended (0x05). no flags. no label. Capacity: 416GB /dev/sda5 Usage: Filesystem. Partition Type: Linux (0x83). no partition label. no flags. Capacity: 999MB. Type: Ext4(ver 1.0). Available: -. Label: -. Mount Point: Not Mounted /dev/sda8 Usage: Filesystem. Partition Type: Linux (0x83). no partition label. no flags. Capacity: 30GB. Type: Ext4(ver 1.0). Available: -. Label: -. Mount Point: Mounted at / /dev/sda6 Usage: Filesystem. Partition Type: Linux (0x83). no partition label. no flags. Capacity: 377GB. Type: Ext4(ver 1.0). Available: -. Label: -. Mount Point: Not Mounted /dev/sda7 Usage: Swap Space. Partition Type: Linux (0x82). no partition label. no flags. Capacity: 8.4GB. sda2 contains Windows 7 but without a mount point sda6 should have been the Home partition and sda5 should have been the Boot partition but the mount points seem to have been lost and now everything but Swap has gone into the root partition sda8 (the Home folder also seems to be within sda8). How do I go about getting sda6 used as the Home partition and sda5 as Boot

  Read the article

• Disallow everything in directory except subdirectories with certain name using .htaccess or vhost.conf

  - by Jizbo Jonez

  How can I disallow everything in a directory except any subdirectories that have a certain name using htaccess or even vhost.conf for the site? I have a protected main directory which contains subdirectories. Each of the subdirectories have another child dir named 'thumbs', that I want to allow people access to. In the thumbs folder I have files which all start with 'thumb_' prefix for the filename. So which approach to use, .htaccess FilesMatch or vhost DirectoryMatch? and what would be the code to use? Thanks

  Read the article

• Convert Pdf to exe to raise security

  - by kamiar3001

  hi folks I have some pdfs I want convert all to exe files and put them into folder on my cd and my customers run exe files instead of pdf and for security reason. so I have tried pdf2exe tools but I need something totally free. pdf2exe is evaluation version and there are some limitation. Please tell me something free, I don't need complicated one I just need encapsulating into exe file. In fact I don't want someone be able to save pdf document and I want to have Independent viewer on my cd.

  Read the article

• Samba issue with sharing directories on NTFS/FAT32

  - by Microkernel

  I have some strange problems with Samba server. I am using samba Version 3.5.4 on Ubuntu 10.10. I have two Windows XP machines, one on VirtualBox on Ubuntu and another office laptop. Windows machine on VirtualBox has no issues in accessing the shared folders, but the laptop is not able to access all the shared content. The issue faced on laptop is the following. Shared folders on ext3 drives have no issues in accessing, but the contents shared on NTFS and FAT32 drives (mounted ones) are not accessible. When I try to open the shared folder, it asks for user name and password, but doesn't accept when I provide it. (Even if I provide admin login details). I changed workgroup value to the domain_name in office laptop, but still the problem persists. Here is the smdb.conf I am using: [global] workgroup = XXX.XXX.ORG server string = %h server (Samba, Ubuntu) map to guest = Bad User obey pam restrictions = Yes pam password change = Yes passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . unix password sync = Yes syslog = 0 log file = /var/log/samba/log.%m max log size = 1000 dns proxy = No usershare allow guests = Yes panic action = /usr/share/samba/panic-action %d guest ok = Yes [homes] comment = Home Directories [printers] comment = All Printers path = /var/spool/samba read only = No create mask = 0700 printable = Yes browseable = No [print$] comment = Samba server's CD-ROM path = /cdrom force user = nobody force group = nobody locking = No Workgroup was defined as "HOMENET" before, changed it to domain name on the office laptop thinking it was the problem, but for no avail.

  Read the article

• Different file locations for http v https on IIS?

  - by Jeremy Morgan

  We have a server running IIS and have some folders running under https, but most are open. The problem I'm having is when someone is directed from a page in the secure section of the site, the relative link brings up https. For example: link to /pictures goes to http://www.mysite.com/pictures But if someone is on a secured part of the site https://www.mysite.com/shoppingcart And then clicks back to /pictures, they get https://www.mysite.com/pictures so the pictures directory is shown under https. My problem is, they get a 404 not found message when this happens. I could not find anything in the settings that would indicate that secured connections are pulling files from anywhere different than non-secured. If I type http or https on the main page of the site both come up fine. But if I try to add the https:// in a folder level, I get a 404. Any ideas why this might be happening?

  Read the article

• Windows XP waits for usb drive on almost every operation.

  - by Tomasz Kowalczyk

  Hello everyone, I have a problem with my Windows XP operating system, particularly with the USB device that is plugged in - 1TB WD My Book external drive. I haven't found any information about such behaviour when searching in Internet, so I have to ask You. The problem is: when I am using computer, especially during work (programming), when I try to access any information on a hard disk ("internal" one), Windows seems to "consult" it with the external drive. For example, when I open file selection dialog window, if I try to change directory, system activates external drive, reads something (I hear the disk's operational noise) and after some seconds of such pause it makes the operations I requested. There are many situations in which I can reproduce this behavior - opening My Computer, shutting down system, opening partition folder from My Computer - every operation involves the usage of external drive. Please understand me properly - this is not something that happens EVERY time, but at least "many" times a day. What causes such behavior and how can I "turn off" external drive when it's not needed? Thanks in advance for your answers.

  Read the article

• best way to enlarge system partition

  - by yuvi

  I have a problem - I need to enlarge my system partition. I mean - when I initially installed Ubuntu, I split the partition so I have 15GB for system and the rest (around 400) pointed at /home/. This is very useful if anything goes wrong someday and I want to format and completely re-install Ubuntu without losing any of my actual data. The problem is, 15GB isn't enough, so it seems. I already moved /var/ and /opt/ folder to /home/, adding symlinks at root, but I'm still at 86% usage and I'm having performance issues (mostly when booting or running a VM). I can use Ubuntu on a flash drive and externally enlarge the partition, but I'm really afraid with going forward with that plan. Also, despite what I said before, I'd like to avoid re-installing the system if at all possible. Any advice, suggestions or ideas on how to best approach this? Any warnings I should heed? Thanks in advance! update Here's the gparted screenshot - as you can see, there's windows on dual boot (sda1-5 are all related to the windows system), then I have a linux swap, 14GB (so uh... not even 15) of system and 435 of for /home.

  Read the article

• 5 Mac Applications For Web And Graphic Design

  - by Jyoti

  In this article free applications useful and effective for the development and creation of websites with your Mac computer. Without further ado, here are 5 Excellent Mac Application for Web and Graphic Design. Fotoflexer : Fotoflexer claims to be “The world’s most advanced online image editor”. It offers completely free access to numerous features such as photo effects, graphics, shapes, morphing, and the creation of collages. You can also integrate and share your art with social sites like MySpace, Flickr, Facebook, and more. This can be an important app if the site you are creating is going to use applications. Simple CSS : With Simple CSS you can create Cascading Style Sheets from scratch or edit them right from the comfort of your desktop. Update styles on multiple pages all at once and reduce the data transfer usage on your page for faster loads. Blender : Blender is an open source software that allows you to create 3D animation with interactive playback leaves you with the option to optimize the style of your site with a few graphics. You can create animations with shades of colors, glossy features, soft shadows and advanced rendering features. JAlbum : Jalbum is a very useful app that allows you to create stylish photo galleries to publish on the web. All you have to do is simply drag selected folders into a pane where any images contained within the folder will automatically be arranged into a photo gallery. You can add several different themes and templates to enhance the appearance of your gallery, later then gain the HTML code and publish the complete gallery onto the web. Colorate : With Colorate you can create harmonized color palettes along with color schemes. Generate these palettes for images, photographs and more.

  Read the article

• Share files from Windows XP to Mac Snow Leopard

  - by sympleko

  Hi, I have a Windows XP desktop and a MacBook Pro on my home network. I would like to mount my "home directory" (My Documents, or whatever they call it in Windows) onto my MacBook's filesystem. So far I have been able to do this with the Shared Documents folder, using the excellent howto at Maclive. But I'd like to be able to authenticate using my Windows XP username and password, and access my files remotely without exposing them to everyone on the nextwork. Any clues or good links?

  Read the article

• How to enable extension when running Firefox for the first time?

  - by spektom

  I need to run Firefox each time in a new profile directory with my extension enabled. What I do is the following: Create temporary directory for storing profile (/tmp/profile.123) Create extensions directory (/tmp/profile.123/extensions) Create extension proxy as described here (/tmp/profile.123/extensions/[email protected]) My command line looks like this: firefox -no-remote -profile /tmp/profile.123 -url http://www.google.com The problem is that my extension starts disabled, and I'm forced to enable it manually and restart the Firefox. Is it possible to make it start enabled in first place? Thanks! Workaround I've found: Create extensions.sqlite database file in the newly created profile folder. This file must contain my extension entry under the "addon" table.

  Read the article

• Replicating EFS encrypted files

  - by floyd

  Recently I attempted to configure Microsoft's DFSR on Windows 2008 R2 to replicate a folder which was encrypted with EFS. The setup gave no errors or warnings, but later I read that DFSR does not support EFS in any way. There were also event logs in the DFSR event log indicating an encrypted file was found and wont be replicated. http://technet.microsoft.com/en-us/library/cc773238(v=ws.10).aspx#BKMK_052 My question is, are there any tools that would allow this to occur? Software based preferably.This would be replicating over LAN to destination node for two servers on the same domain.

  Read the article

• Convience of mySQL over xml

  - by Bonechilla

  Currently I use XML to store specific information to correctly load a few things such as a list of specfied characters, scenes and music, Once more I use JAXB in combination with standard compression/decompression(ZIP) functionality to store a list of extrenous data. This data is called to add functionality to the character, somewhat like Skills in an RPG. Each skill is seperated into its own XML file with a grandlist which contains the names of each file with their extensions omitted and zipped in folder that gets encrypted. At first using xml was working fine however as the skill list grow i worry about its stability. I was wondering if I should begin storing the data in mySQL. Originally I planned to simply convert everything to JSON over xml but i think possibly mySQL would be a better move. Can anyone inform me of the key difference and pros and cons of each I guess i'm looking for the best way to store the data more conviently and would be easier to operate on. The data is mostly primatives and strings and the only arraylist of values i have i can just concat into a single field and parse later

  Read the article

< Previous Page | 381 382 383 384 385 386 387 388 389 390 391 392  | Next Page >