Search Results

Search found 12751 results on 511 pages for 'interface'.

Page 386/511 | < Previous Page | 382 383 384 385 386 387 388 389 390 391 392 393  | Next Page >

• LSI RAID monitor reports "Consistency Check inconsistency logging disabled"

  - by carlpett

  I have a server with a LSI MegaRAID 9261-8i controller. Recently I started getting alerts like this one: Controller ID: 1 Consistency Check inconsistency logging disabled, too many inconsistencies on VD: 0 Generated on:Sat May 12 04:06:40 2012 SYSTEM DETAILS--- IP Address: 192.168.1.29 OS Name: Windows 7 x64 OS Version: 6.01 Driver Name: megasas.sys Driver Version: 4.5.1.64 IMAGE DETAILS--- BIOS Version: 2.120.33-1197 Firmware Package Version: 12.12.0-0045 Firmware Version: 3.21.00_4.11.05.00_0x05000000 VD 0 is a RAID mirror containing the system disk. I have searched and read, but cannot find any trace of how to actually do anything about this. I tried running a scandisk but that did not find anything (as I expected, since scandisk reads the disks as exposed by the controller, right?). The MegaRAID Storage Manager does not as far as I can see have any options for checking or fixing physical disks. The program claims the VD is "healty", and both disks have Error count 0. Also a bit strange is the System details in the message... The IP address is associated with the RAS (dial in) interface, and the OS should be Windows Server 2011 SBS. Has anyone else experienced this before? What can be done?

  Read the article

• Error accessing or executing Nagios / Icinga binary '/usr/sbin/nagios'. Cannot run the mandatory syntax check

  - by Zim3r

  I see an error while using NConf interface in Generate Nagios config Error accessing or executing Nagios / Icinga binary '/usr/sbin/nagios'. Cannot run the mandatory syntax check. I checked Apache Error_log and it says: sh: /usr/sbin/nagios: Permission denied I tried changing permissions and ownership but no change. How can I fix this? Edit: ls -l /usr/sbin/nagios -rwxrwxrwx. 1 apache apache 644184 Jul 2 02:10 /usr/sbin/nagios ps -ef | egrep 'httpd|apache' root 4175 1 0 10:50 ? 00:00:00 /usr/sbin/httpd apache 4177 4175 0 10:50 ? 00:00:00 /usr/sbin/httpd apache 4178 4175 0 10:50 ? 00:00:00 /usr/sbin/httpd apache 4179 4175 0 10:50 ? 00:00:00 /usr/sbin/httpd apache 4180 4175 0 10:50 ? 00:00:00 /usr/sbin/httpd apache 4181 4175 0 10:50 ? 00:00:00 /usr/sbin/httpd apache 4182 4175 0 10:50 ? 00:00:00 /usr/sbin/httpd apache 4183 4175 0 10:50 ? 00:00:00 /usr/sbin/httpd apache 4184 4175 0 10:50 ? 00:00:00 /usr/sbin/httpd apache 4559 4175 0 11:31 ? 00:00:00 /usr/sbin/httpd root 4888 4854 0 12:26 pts/1 00:00:00 egrep httpd|apache

  Read the article

• Teamcity build agent gives 504 gateway timeout

  - by Anthony

  I have a new teamcity build agent machine, which when started up tries to connect to the build server and fails. It never shows up in the connected, disconnected or unauthorised agents tabs of the build server web interface. The logs on the build agent show that it fails to connect with a 504 gateway timeout. This is from teamcity-agent.log [2012-09-04 15:34:59,776] INFO - buildServer.AGENT.registration - Registering on server http://10.0.10.16, AgentDetails{Name='my-local', AgentId=null, BuildId=null, AgentOwnAddress='10.0.1.14', AlternativeAddresses=[10.0.10.32], Port=8080, Version='21424', PluginsVersion='21424-md5-somechecksum', AvailableRunners=[ABunchOfPlugins], AvailableVcs=[SomeRunners], AuthorizationToken='sometoken'} [2012-09-04 15:35:53,606] WARN - buildServer.AGENT.registration - Call http://10.0.10.16/RPC2 buildServer.registerAgent3: org.apache.xmlrpc.XmlRpcClientException: Server returned incorrect status code: 504 Gateway Time-out [2012-09-04 15:35:53,606] WARN - buildServer.AGENT.registration - Connection to TeamCity server is probably lost. Will be trying to restore it. Take a look at logs/teamcity-agent.log for details (unless you're using custom logging). (I have edited some identifying data out of this log excerpt) But I can reach the build server. In fact, tracert shows that it is very nearby. Tracing route to TEAMCITYSERVER [10.0.10.16] over a maximum of 30 hops: 1 <1 ms <1 ms <1 ms 10.0.2.1 2 <1 ms <1 ms <1 ms TEAMCITYSERVER [10.0.10.16] Trace complete. I can see a teamcity login page if I hit http://10.0.10.16 in the browser. The teamcity service is logging in as the same (local administrator) account as I used to log in and test the network. The build agent is a windows 2008 server VM hosted on Ubuntu 12.04 under Oracle VirtualBox. I have disabled firewalls on both the Windows and Ubuntu machines. Other VMS with similar configuration can connect fine and do not report this error. What can possibly be preventing this connection?

  Read the article

• ignoring informational payload, type INVALID_COOKIE msgid=00000000

  - by user197279

  I'm configuring a site-to-site vpn between openswan ipsec and cisco asa 5540. After the step, i started ipesc service but the error i'm seeing is: ignoring informational payload, type INVALID_COOKIE msgid=00000000 Nov 5 09:42:30 pluto[11712]: "myVPN" #1: received and ignored informational message Nov 5 09:42:51 pluto[11712]: "myVPN" #1: ignoring informational payload, type INVALID_COOKIE msgid=00000000 Nov 5 09:42:51 pluto[11712]: "myVPN" #1: received and ignored informational message Nov 5 09:43:30 pluto[11712]: "myVPN" #1: max number of retransmissions (2) reached STATE_MAIN_I2 Nov 5 09:43:30 pluto[11712]: "myVPN" #1: starting keying attempt 2 of at most 3 Any advise why I'm getting this error on openswan? Also sudo ipsec whack --status gives: "myVPN": 10.0.xx.0/24===10.0.7x.x[54.209.y.yyy,+S=C]---10.0.xx.x...10.0.70.x---41.22x.4.xx<41.22x.4.xx[+S=C]===41.22y.4.yyy/32; unrouted; eroute owner: #0 000 "myVPN": myip=54.209.zz.zz; hisip=unset; 000 "myVPN": ike_life: 86400s; ipsec_life: 28800s; rekey_margin: 540s; rekey_fuzz: 100%; keyingtries: 3 000 "myVPN": policy: PSK+ENCRYPT+TUNNEL+DONTREKEY+UP+IKEv2ALLOW+SAREFTRACK+lKOD+rKOD; prio: 24,32; interface: eth0; 000 "myVPN": newest ISAKMP SA: #0; newest IPsec SA: #0; 000 "myVPN": IKE algorithms wanted: AES_CBC(7)_256-SHA1(2)_000-MODP1024(2); flags=-strict 000 "myVPN": IKE algorithms found: AES_CBC(7)_256-SHA1(2)_160-MODP1024(2) 000 "myVPN": ESP algorithms wanted: AES(12)_256-SHA1(2)_000; flags=-strict 000 "myVPN": ESP algorithms loaded: AES(12)_256-SHA1(2)_160 000 000 #5: "myVPN":500 STATE_MAIN_I2 (sent MI2, expecting MR2); EVENT_RETRANSMIT in 8s; nodpd; idle; import:admin initiate 000 #5: pending Phase 2 for "myVPN" replacing #0 Thanks.

  Read the article

• Does the Intel DX79TO motherboard support x8 devices (SAS HBAs) on PCIe x16 slots?

  - by Zac B

  Context: I have an Intel DX79TO motherboard and a Sun SAS3081E-S/LSI 1060E-S HBA card with a PCIe x8 interface. I plug the HBA into my mobo next to my graphics card, and the HBA power lights illuminate, but the BIOS and OSes (tried Linux, ESXi, Win7) don't see the HBA at all. Question: Does the DX79TO motherboard support non-x16/non-GPU devices in its PCIe x16 slots? According to this question, some consumer motherboards don't support this, but I can't figure out whether or not this motherboard/family does. The answer will affect whether I buy a new motherboard or RMA the SAS card, with money attached to each course, so I figured I'd ask here first. What I've Tried: I've read the spec/manuals for the motherboard and the HBA, and I didn't see anything regarding whether or not the x16 slots were back-compatible to lower lane widths/non graphics-card devices, or whether or not the card could run in wider slots than x8. I've tried contacting Intel, but that was over a month ago and I haven't yet heard anything back except an automated "we got your email!" message.

  Read the article

• Configuring VirtualBox host only networking: OSX host, Ubuntu guest

  - by Greg K

  I have a Ubuntu guest configured with two interfaces, eth0 is using NAT and works fine, I can access the net. The second interface eth1 is set to host only networking and VirtualBox has created a vboxnet0 virtual adapter on the host. I've configured vboxnet0 in VirtualBox adapter settings with the following: ip 192.168.21.20 subnet 255.255.255.0 Once the VM guest is running, ifconfig on OSX has vboxnet0 setup as: vboxnet0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 ether 0a:00:27:00:00:00 inet 192.168.21.20 netmask 0xffffff00 broadcast 192.168.21.255 In the guest, eth0 is set to use DHCP, I've statically assigned eth1 to 192.168.21.20 (is this a mistake?): auto eth1 iface eth1 inet static address 192.168.21.20 netmask 255.255.255.0 network 192.168.21.0 broadcast 192.168.21.255 gateway 192.168.21.1 There is no device on 192.168.21.1 - what should I set my gateway to? In the guest the routes look like so: Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.21.0 * 255.255.255.0 U 0 0 0 eth1 10.0.2.0 * 255.255.255.0 U 0 0 0 eth0 default 10.0.2.2 0.0.0.0 UG 100 0 0 eth0 default 192.168.21.1 0.0.0.0 UG 100 0 0 eth1 Route table on OSX: $ netstat -nr Routing tables Internet: Destination Gateway Flags Refs Use Netif Expire default 10.77.36.1 UGSc 28 0 en1 10.77.36/22 link#5 UCS 5 0 en1 10.77.39.38 127.0.0.1 UHS 1 2236 lo0 10.77.39.255 link#5 UHLWbI 1 66 en1 127 127.0.0.1 UCS 0 0 lo0 127.0.0.1 127.0.0.1 UH 1 8642 lo0 169.254 link#5 UCS 0 0 en1 192.168.21 link#7 UC 2 0 vboxnet 192.168.21.20 a:0:27:0:0:0 UHLWI 0 4 lo0 192.168.21.255 link#7 UHLWbI 2 64 vboxnet I can't SSH from the host to the guest (I used to be able to when the VM was configured with a bridged connection): $ ssh 192.168.21.20 ssh: connect to host 192.168.21.20 port 22: Connection refused What have I done wrong here? TIA

  Read the article

• MySQL won't start or won't installed

  - by Owen

  Hi there, I'm trying to get a local LAMP setup on my Ubuntu desktop. I'm successfully got PHP install but I'm having trouble with MySQL If PHP tries to connet to MySQL I get this error: Warning: mysql_connect() [function.mysql-connect]: Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) in /var/www/testing.php on line 3 Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) If I try via command line I get much the same error: owen@desktop:~$ mysql ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (13) Weirdly "/var/run/mysqld" does not exist. Running a whereis command I get the following: owen@desktop:~$ whereis mysqld.sock mysqld: /usr/sbin/mysqld /usr/share/man/man8/mysqld.8.gz So is MySQL even installed? Well acording to dpkg owen@desktop:~$ dpkg -l | grep mysql ii libapache2-mod-auth-mysql 4.3.9-13ubuntu1 Apache 2 module for MySQL authentication ii libdbd-mysql-perl 4.016-1 Perl5 database interface to the MySQL database ii libmysqlclient15off 5.1.30really5.0.83-0ubuntu3 MySQL database client library ii libmysqlclient16 5.1.49-1ubuntu8.1 MySQL database client library ii mysql-admin 5.0r14+openSUSE-2.1 GUI tool for intuitive MySQL administration ii mysql-client-5.1 5.1.49-1ubuntu8.1 MySQL database client binaries ii mysql-client-core-5.1 5.1.49-1ubuntu8.1 MySQL database core client binaries ii mysql-common 5.1.49-1ubuntu8.1 MySQL database common files, e.g. /etc/mysql/my.cnf ii mysql-gui-tools-common 5.0r14+openSUSE-2.1 Architecture independent files for MySQL GUI Tools ii mysql-query-browser 5.0r14+openSUSE-2.1 Official GUI tool to query MySQL database ii mysql-server 5.1.49-1ubuntu8.1 MySQL database server (metapackage depending on the latest version) ii mysql-server-5.1 5.1.49-1ubuntu8.1 MySQL database server binaries and system database setup ii mysql-server-core-5.0 5.1.30really5.0.83-0ubuntu3 MySQL database core server files ii mysql-server-core-5.1 5.1.49-1ubuntu8.1 MySQL database server binaries ii php5-mysql Can someone please help I'm really confused as what to do next. I'm not a Linux expert at all most of these commands I've ran I found of diffrent blogs and help forums.

  Read the article

• Plesk SSL Certificate (Default cert when SSL enabled, CORRECT cert when SSL is disabled)

  - by hztetra

  I'm running Plesk 8.6.0: I have an SSL cert installed through Plesk's admin interface. But I have a bit of an issue: When I enabled SSL for the site, and selected my cert, then restart httpd, Plesk defaults to using my self-signed default certificate. Conversely, when I disable SSL support for the domain, all of a sudden Plesk is using my new SSL certificate. Unfortunately, when I try to view any folder on the site (mydomain.tld/folder) I'm simply met with a 404 (with files placed both in httpdocs and httpsdocs). I switch SSL support back on, and Plesk defaults back to the default self-signed cert and I can then view the folders that were not previously accessible. Any ideas? One further note: I tried following http://kb.parallels.com/en/939 . Once I tried to restart httpd with the edited ssl.conf file, I received an httpd could not start error. I restored the original ssl.conf file, and still received the could not start error. So as of now, I am running without an ssl.conf file. The following is the error I receive when I attempt to reintroduce ssl.conf: Starting httpd: [Mon Aug 23 15:45:40 2010] [warn] module ssl_module is already loaded, skipping (98)Address already in use: make_sock: could not bind to address 0.0.0.0:443 no listening sockets available, shutting down Unable to open logs

  Read the article

• Connecting to ItsHidden in Ubuntu 9.10 problems

  - by Ionel Bratianu

  I try to setup a VPN connection to ItsHidden on Ubuntu 9.10. I double-checked my credentials in the VPN configuration, but I don't think that this is problem. In my syslog I got these messages: Jan 11 14:38:46 NetworkManager: Starting VPN service 'org.freedesktop.NetworkManager.pptp'... Jan 11 14:38:46 NetworkManager: VPN service 'org.freedesktop.NetworkManager.pptp' started (org.freedesktop.NetworkManager.pptp), PID 4502 Jan 11 14:38:46 NetworkManager: VPN service 'org.freedesktop.NetworkManager.pptp' just appeared, activating connections Jan 11 14:38:46 NetworkManager: VPN plugin state changed: 1 Jan 11 14:38:46 NetworkManager: VPN plugin state changed: 3 Jan 11 14:38:46 pppd[4506]: Plugin /usr/lib/pppd/2.4.5//nm-pptp-pppd-plugin.so loaded. Jan 11 14:38:46 NetworkManager: VPN connection 'ItsHidden' (Connect) reply received. Jan 11 14:38:46 pppd[4506]: pppd 2.4.5 started by root, uid 0 Jan 11 14:38:46 pppd[4506]: Using interface ppp0 Jan 11 14:38:46 NetworkManager: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/ppp0, iface: ppp0) Jan 11 14:38:46 NetworkManager: SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/ppp0, iface: ppp0): no ifupdown configuration found. Jan 11 14:38:46 pppd[4506]: Connect: ppp0 /dev/pts/1 Jan 11 14:39:06 pptp[4508]: nm-pptp-service-4502 fatal[get_ip_address:pptp.c:430]: gethostbyname 'vpn.itshidden.com': HOST NOT FOUND Jan 11 14:39:06 pppd[4506]: Modem hangup Jan 11 14:39:06 pppd[4506]: Connection terminated. Jan 11 14:39:06 NetworkManager: VPN plugin failed: 1 Jan 11 14:39:06 NetworkManager: SCPlugin-Ifupdown: devices removed (path: /sys/devices/virtual/net/ppp0, iface: ppp0) Jan 11 14:39:06 pppd[4506]: Exit. Jan 11 14:39:06 NetworkManager: VPN plugin failed: 1 Jan 11 14:39:06 NetworkManager: VPN plugin failed: 1 Jan 11 14:39:06 NetworkManager: VPN plugin state changed: 6 Jan 11 14:39:06 NetworkManager: VPN plugin state change reason: 0 Jan 11 14:39:06 NetworkManager: connection_state_changed(): Could not process the request because no VPN connection was active. Jan 11 14:39:06 NetworkManager: Policy set 'Auto eth0' (eth0) as default for routing and DNS. Jan 11 14:39:19 NetworkManager: [1263213559.003098] ensure_killed(): waiting for vpn service pid 4502 to exit Jan 11 14:39:19 NetworkManager: [1263213559.003289] ensure_killed(): vpn service pid 4502 cleaned up Because the gethostbyname is failing, I suppose that the NetworkManager doesn't know that I use proxies for accessing Internet. I'm not sure that this is the real problem. Could you tell me a solution to make gesthostbyname not failing anymore?

  Read the article

• Cacti rrdtool graph with no values, NaN in .rrd file

  - by beicha

  Cacti 0.8.7h, with latest RRDTool. I successfully graphed CPU/Interface traffic, but got blank graphs like when it comes to Memory/Temperature monitoring. The problem/bug is actually archived here, however this post didn't help. I can snmpget the value, e.g SNMPv2-SMI::enterprises.9.9.13.1.3.1.3.1 = Gauge32: 26. However, the problem seems to exist in storing these values to the .rrd file. Output of rrdtool info powerbseipv6testrouter_cisco_memfree_40.rrd AVERAGE cisco_memfree as below: filename = "powerbseipv6testrouter_cisco_memfree_40.rrd" rrd_version = "0003" step = 300 last_update = 1321867894 ds[cisco_memfree].type = "GAUGE" ds[cisco_memfree].minimal_heartbeat = 600 ds[cisco_memfree].min = 0.0000000000e+00 ds[cisco_memfree].max = 1.0000000000e+12 ds[cisco_memfree].last_ds = "UNKN" ds[cisco_memfree].value = 0.0000000000e+00 ds[cisco_memfree].unknown_sec = 94 rra[0].cf = "AVERAGE" rra[0].rows = 600 rra[0].pdp_per_row = 1 rra[0].xff = 5.0000000000e-01 rra[0].cdp_prep[0].value = NaN rra[0].cdp_prep[0].unknown_datapoints = 0 rra[1].cf = "AVERAGE" rra[1].rows = 700 rra[1].pdp_per_row = 6 rra[1].xff = 5.0000000000e-01 rra[1].cdp_prep[0].value = NaN rra[1].cdp_prep[0].unknown_datapoints = 0 rra[2].cf = "AVERAGE" rra[2].rows = 775 rra[2].pdp_per_row = 24 rra[2].xff = 5.0000000000e-01 rra[2].cdp_prep[0].value = NaN rra[2].cdp_prep[0].unknown_datapoints = 18 rra[3].cf = "AVERAGE" rra[3].rows = 797 rra[3].pdp_per_row = 288 rra[3].xff = 5.0000000000e-01 rra[3].cdp_prep[0].value = NaN rra[3].cdp_prep[0].unknown_datapoints = 114 rra[4].cf = "MAX" rra[4].rows = 600 rra[4].pdp_per_row = 1 rra[4].xff = 5.0000000000e-01 rra[4].cdp_prep[0].value = NaN rra[4].cdp_prep[0].unknown_datapoints = 0 rra[5].cf = "MAX" rra[5].rows = 700 rra[5].pdp_per_row = 6 rra[5].xff = 5.0000000000e-01 rra[5].cdp_prep[0].value = NaN rra[5].cdp_prep[0].unknown_datapoints = 0 rra[6].cf = "MAX" rra[6].rows = 775 rra[6].pdp_per_row = 24 rra[6].xff = 5.0000000000e-01 rra[6].cdp_prep[0].value = NaN rra[6].cdp_prep[0].unknown_datapoints = 18 rra[7].cf = "MAX" rra[7].rows = 797 rra[7].pdp_per_row = 288 rra[7].xff = 5.0000000000e-01 rra[7].cdp_prep[0].value = NaN rra[7].cdp_prep[0].unknown_datapoints = 114

  Read the article

• DD-WRT: DNSMasq expand-hosts not working

  - by Craig Walker

  I have a Linksys router running DD-WRT (Firmware: DD-WRT v24-sp2 (09/08/09) mini). I have it successfully resolving the DNS names for my DHCP-assigned systems, but only when I fully-qualify those domains. This is despite using the "expand-hosts" DNSMasq additional option, which is supposed to activate this precise function. Here's my dnsmasq.conf: interface=br0 resolv-file=/tmp/resolv.dnsmasq domain=example.com dhcp-leasefile=/tmp/dnsmasq.leases dhcp-lease-max=51 dhcp-option=lan,3,10.77.0.5 dhcp-authoritative dhcp-range=lan,10.77.0.100,10.77.0.149,255.255.0.0,1440m dhcp-host=00:1A:A0:1D:82:5A,astatichostname,10.77.1.40,infinite expand-hosts (FYI: example.com and astatichostname are placeholders for the real-deal names I use. My network uses 10.77.0.0/16; my router is on 10.77.0.5.) Results: > nslookup astatichostname 10.77.0.5 Server: 10.77.0.5 Address: 10.77.0.5#53 ** server can't find astatichostname: NXDOMAIN > nslookup astatichostname.example.com 10.77.0.5 Server: 10.77.0.5 Address: 10.77.0.5#53 Name: astatichostname.example.com Address: 10.77.1.40 Is there something else that could be tripping up expand-host in DNSMasq?

  Read the article

• Cisco PIX to Juniper Netscreen Policy-based VPN fails Phase 2 Proposal

  - by elint

  I've followed the instructions to configure a VPN between a netscreen device and a Cisco PIX as directed by Cisco's [netscreen to PIX VPN]http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a00801c4445.shtml article. The only differences are that I'm running PIX 6.3(5) and Juniper Netscreen 6.1.0r2.0 (Firewall+VPN). I followed both configurations exactly, and when I try to connect, the Juniper returns with: 2010-02-21 12:54:28 information IKE: Removed Phase 2 SAs after receiving a notification message. 2010-02-21 12:54:28 information IKE pix_public_IP: Received a notification message for DOI 1 14 NO-PROPOSAL-CHOSEN. 2010-02-21 12:54:28 information IKE pix_public_IP Phase 2: Initiated negotiations. On the Netscreen, I've created a Phase 2 Proposal called ToCorpOffice using DH Group#2, 3DES-CBC, and SHA-1, and when configuring the AutoKey IKE, I chose ToCorpOffice and removed all other transforms. I believe I've configured the same on the PIX with: sysopt connection permit-ipsec crypto ipsec transform-set mytrans esp-3des esp-sha-hmac crypto map mymap 10 ipsec-isakmp crypto map mymap 10 match address nonat crypto map mymap 10 set pfs group2 crypto map mymap 10 set peer netscreen_public_ip crypto map mymap 10 set transform-set mytrans crypto map mymap interface outside Saved that and rebooted, so here's the cryptomap info: PIX-FW1# show crypto map Crypto Map: "mymap" interfaces: { outside } Crypto Map "mymap" 10 ipsec-isakmp Peer = netscreen_public_ip access-list nonat; 1 elements access-list nonat line 1 permit ip 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0 (hitcnt=0) Current peer: netscreen_public_ip Security association lifetime: 4608000 kilobytes/28800 seconds PFS (Y/N): Y DH group: group2 Transform sets={ mytrans, } PIX-FW1# Any idea why I'm getting a NO-PROPOSAL-CHOSEN error?

  Read the article

• Issues with ProxyPass and ProxyPassReverse when proxying to localhost and a different TCP port

  - by mbrownnyc

  I am attempting to use ProxyPass and ProxyPassReverse to proxy requests through Apache to another server instance that is bound to the localhost on a different TCP port that the Vhost exists (VHost is bound to :80, when the target is bound to :5000). However, I am repeatedly receiving HTTP 503 when accessing the Location. According to the ProxyPass documentation... <VirtualHost *:80> ServerName apacheserver.domain.local DocumentRoot /var/www/redmine/public ErrorLog logs/redmine_error <Directory /var/www/redmine/public> Allow from all Options -MultiViews Order allow,deny AllowOverride all </Directory> </VirtualHost> PassengerTempDir /tmp/passenger <Location /rhodecode> ProxyPass http://127.0.0.1:5000/rhodecode ProxyPassReverse http://127.0.0.1:5000/rhodecode SetEnvIf X-Url-Scheme https HTTPS=1 </Location> I have tested binding the alternate server to the interface IP address, and the same issue occurs. The server servicing request is an instance of python paste:httpserver, and it has been configured to use the /rhodecode suffix (as I saw this to be mentioned in other posts about ProxyPass). The documentation from the project itself, Rhodecode, reports to use the above. The issue is persistent if I target another server that is serving on a different port. Does ProxyPass allow proxying to a different TCP port? [update] I won't delete this, in case someone comes across the same issue. I had set an ErrorLog, and in that ErrorLog the following error was reported: [Wed Nov 09 11:36:35 2011] [error] (13)Permission denied: proxy: HTTP: attempt to connect to 127.0.0.1:5000 (192.168.100.100) failed [Wed Nov 09 11:36:35 2011] [error] ap_proxy_connect_backend disabling worker for (192.168.100.100) After some more research, I attempted to set SELinux to permissive (echo 0 >/selinux/enforce), and try again. It turns out the SELinux boolean httpd_can_network_connect must be set to 1. For persistence on reboot: setsebool -P httpd_can_network_connect=1

  Read the article

• pfSense: How to route traffic out the WAN port?

  - by Ian Boyd

  Expert version i want to create a route in pfSense that will send traffic out the physical WAN port, not the PPPoE WAN port. i want to talk to talk to the web-server on my DSL modem, but it doesn't see packets wrapped in a PPPoE header. Long version My pfSense router is responsible for setting up the PPPoE connection over DSL to my ISP. When a machine on the LAN wants to sent packets to the internet, the default route sends packets out over the PPPoE connection. Those packets, wrapped in a PPPoE header, are sent on the ethernet cable to my DSL modem. From there they are sent the ISP, and the internet at large. i want a way to send a packet out the WAN port itself - not the PPPoE WAN port. My modem is sitting out there, with a http interface where i can monitor connection speed signal-to-noise ratio bandwidth connection time Whenever i try to set a route for destination of 192.168.2.1 (the IP that the modem will listen to for HTTP requests) to go out the WAN port, they instead end up going out the PPPoE port. The difference being that they're wrapped in a PPPoE protocol packet, and the modem isn't being sent the packet, it's being delivered to the ISP. Given that pfSense has no ability to direct traffic out the physical WAN port: how can i direct traffic out the physical WAN port on pfSense?

  Read the article

• Cisco adaptive security appliance is dropping packets where SYN flag is not set

  - by Brett Ryan

  We have an apache instance sitting inside our DMZ which is configured to proxy requests to an internal NATed tomcat instance inside our network. It works fine, but then all of a sudden requests from apache to the tomcat instance stop getting through with the following in the apache logs: [error] (70007)The timeout specified has expired: ajp_ilink_receive() can't receive header Investigating into the Cisco log viewer reveals the following: Error Message %ASA-6-106015: Deny TCP (no connection) from IP_address/port to IP_address/port flags tcp_flags on interface interface_name. Explanation The adaptive security appliance discarded a TCP packet that has no associated connection in the adaptive security appliance connection table. The adaptive security appliance looks for a SYN flag in the packet, which indicates a request to establish a new connection. If the SYN flag is not set, and there is not an existing connection, the adaptive security appliance discards the packet. Recommended Action None required unless the adaptive security appliance receives a large volume of these invalid TCP packets. If this is the case, trace the packets to the source and determine the reason these packets were sent. All are machines are virtualised using VMware, and by default machines have been using the Intel E1000 emulated NIC. Our network administrator has changed this to a VMXNET3 driver in an attempt to correct the problem, we just have to wait and see if the problem persists as it's an intermittent problem. Is there something else that could be causing this problem? This isn't the first service where we have had similar issues. Our apache host is running Ubuntu 11.10 with a kernel version of 3.0.0-17-server. We have also had this issue on RHEL5 (5.8) running kernel 2.6.18-308.16.1.el5, this machine also has the E1000 NIC. NOTE: I am not a network administrator and am a software architect and analyst programmer responsible for these systems.

  Read the article

• iMac OSX "no route to host"

  - by jairo

  I have an issue with one of my computer on my network. It is an iMac running OS X 10.5.8. The issue is accessing certain websites. For instance, one of these websites is that the computer is unable to connect to is farmville.com. When I ping farmville.com it returns "no route to host": $ ping farmville.com PING farmville.com (50.16.253.102): 56 data bytes ping: sendto: No route to host ping: sendto: No route to host ping: sendto: No route to host When I traceroute farmville: $ traceroute farmville.com traceroute: Warning: farmville.com has multiple addresses; using 50.16.253.109 traceroute to farmville.com (50.16.253.109), 64 hops max, 40 byte packets traceroute: sendto: No route to host 1 traceroute: wrote farmville.com 40 chars, ret=-1 tracerouting the farmville ip address: 50.16.253.109 $ traceroute 50.16.253.109 traceroute to farmville.com (50.16.253.109), 64 hops max, 40 byte packets traceroute: sendto: No route to host 1 traceroute: wrote farmville.com 40 chars, ret=-1 Now the interesting part is that I on another computer (running Ubuntu 10.10) I have no issues at all accessing this website. Which tells me that it's not the internet connection. I've also disabled the firewall on the router to no avail. The /etc/hosts file in the mac is the following. The /private/etc/hosts file is empty: ## # Host Database # # localhost is used to configure the loopback interface # when the system is booting. Do not change this entry. ## 127.0.0.1 localhost #255.255.255.255 broadcasthost ::1 localhost fe80::1%lo0 localhost Any help is appreciated. Many thanks

  Read the article

• SQL Server Express 2008 R2 Installation error at Windows 7

  - by Shai Sherman

  Hello, I created install script that will install SQL Server 2008 R2 on windows XP SP3, windows vista and windows 7. One of the command that i used in the installation is for silent installation of SQL Server 2008 R2. When i install it on windows XP everything works just fine but when i try to install it on Windows 7 i get an error. What am I doing wrong? Here is the command line that i use: "Setup.exe /ConfigurationFile=Mysetup.ini" Mysetup.ini file: -------------------------------------Start of ini file --------------------------------- ;SQL SERVER 2008 R2 Configuration File ;Version 1.0, 5 May 2010 ; [SQLSERVER2008] ; Specify the Instance ID for the SQL Server features you have specified. SQL Server directory structure, registry structure, and service names will reflect the instance ID of the SQL Server instance. INSTANCEID="MSSQLSERVER" ; Specifies a Setup work flow, like INSTALL, UNINSTALL, or UPGRADE. This is a required parameter. ACTION="Install" ; Specifies features to install, uninstall, or upgrade. The list of top-level features include SQL, AS, RS, IS, and Tools. The SQL feature will install the database engine, replication, and full-text. The Tools feature will install Management Tools, Books online, Business Intelligence Development Studio, and other shared components. FEATURES=SQLENGINE ; Displays the command line parameters usage HELP="False" ; Specifies that the detailed Setup log should be piped to the console. INDICATEPROGRESS="False" ; Setup will not display any user interface. QUIET="False" ; Setup will display progress only without any user interaction. QUIETSIMPLE="True" ; Specifies that Setup should install into WOW64. This command line argument is not supported on an IA64 or a 32-bit system. ;X86="False" ; Specifies the path to the installation media folder where setup.exe is located. ;MEDIASOURCE="z:\" ; Detailed help for command line argument ENU has not been defined yet. ENU="True" ; Parameter that controls the user interface behavior. Valid values are Normal for the full UI, and AutoAdvance for a simplied UI. ; UIMODE="Normal" ; Specify if errors can be reported to Microsoft to improve future SQL Server releases. Specify 1 or True to enable and 0 or False to disable this feature. ERRORREPORTING="False" ; Specify the root installation directory for native shared components. ;INSTALLSHAREDDIR="D:\Program Files\Microsoft SQL Server" ; Specify the root installation directory for the WOW64 shared components. ;INSTALLSHAREDWOWDIR="D:\Program Files (x86)\Microsoft SQL Server" ; Specify the installation directory. ;INSTANCEDIR="D:\Program Files\Microsoft SQL Server" ; Specify that SQL Server feature usage data can be collected and sent to Microsoft. Specify 1 or True to enable and 0 or False to disable this feature. SQMREPORTING="False" ; Specify a default or named instance. MSSQLSERVER is the default instance for non-Express editions and SQLExpress for Express editions. This parameter is required when installing the SQL Server Database Engine (SQL), Analysis Services (AS), or Reporting Services (RS). INSTANCENAME="SQLEXPRESS" SECURITYMODE=SQL SAPWD=SystemAdmin ; Agent account name AGTSVCACCOUNT="NT AUTHORITY\NETWORK SERVICE" ; Auto-start service after installation. AGTSVCSTARTUPTYPE="Manual" ; Startup type for Integration Services. ;ISSVCSTARTUPTYPE="Automatic" ; Account for Integration Services: Domain\User or system account. ;ISSVCACCOUNT="NT AUTHORITY\NetworkService" ; Controls the service startup type setting after the service has been created. ;ASSVCSTARTUPTYPE="Automatic" ; The collation to be used by Analysis Services. ;ASCOLLATION="Latin1_General_CI_AS" ; The location for the Analysis Services data files. ;ASDATADIR="Data" ; The location for the Analysis Services log files. ;ASLOGDIR="Log" ; The location for the Analysis Services backup files. ;ASBACKUPDIR="Backup" ; The location for the Analysis Services temporary files. ;ASTEMPDIR="Temp" ; The location for the Analysis Services configuration files. ;ASCONFIGDIR="Config" ; Specifies whether or not the MSOLAP provider is allowed to run in process. ;ASPROVIDERMSOLAP="1" ; A port number used to connect to the SharePoint Central Administration web application. ;FARMADMINPORT="0" ; Startup type for the SQL Server service. SQLSVCSTARTUPTYPE="Automatic" ; Level to enable FILESTREAM feature at (0, 1, 2 or 3). FILESTREAMLEVEL="0" ; Set to "1" to enable RANU for SQL Server Express. ENABLERANU="1" ; Specifies a Windows collation or an SQL collation to use for the Database Engine. SQLCOLLATION="SQL_Latin1_General_CP1_CI_AS" ; Account for SQL Server service: Domain\User or system account. SQLSVCACCOUNT="NT Authority\System" ; Default directory for the Database Engine user databases. ;SQLUSERDBDIR="K:\Microsoft SQL Server\MSSQL\Data" ; Default directory for the Database Engine user database logs. ;SQLUSERDBLOGDIR="L:\Microsoft SQL Server\MSSQL\Data\Logs" ; Directory for Database Engine TempDB files. ;SQLTEMPDBDIR="T:\Microsoft SQL Server\MSSQL\Data" ; Directory for the Database Engine TempDB log files. ;SQLTEMPDBLOGDIR="T:\Microsoft SQL Server\MSSQL\Data\Logs" ; Provision current user as a Database Engine system administrator for SQL Server 2008 R2 Express. ADDCURRENTUSERASSQLADMIN="True" ; Specify 0 to disable or 1 to enable the TCP/IP protocol. TCPENABLED="1" ; Specify 0 to disable or 1 to enable the Named Pipes protocol. NPENABLED="0" ; Startup type for Browser Service. BROWSERSVCSTARTUPTYPE="Automatic" ; Specifies how the startup mode of the report server NT service. When ; Manual - Service startup is manual mode (default). ; Automatic - Service startup is automatic mode. ; Disabled - Service is disabled ;RSSVCSTARTUPTYPE="Automatic" ; Specifies which mode report server is installed in. ; Default value: “FilesOnly” ;RSINSTALLMODE="FilesOnlyMode" ; Accept SQL Server 2008 R2 license terms IACCEPTSQLSERVERLICENSETERMS="TRUE" ;setup.exe /CONFIGURATIONFILE=Mysetup.ini /INDICATEPROGRESS --------------------------- End of ini file ------------------------------------- And i get this error: 2010-08-31 18:05:53 Slp: Error result: -2068119551 2010-08-31 18:05:53 Slp: Result facility code: 1211 2010-08-31 18:05:53 Slp: Result error code: 1 2010-08-31 18:05:53 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine 2010-08-31 18:05:53 Slp: Sco: Attempting to open registry subkey 2010-08-31 18:05:53 Slp: Sco: Attempting to open registry subkey Software\Microsoft\PCHealth\ErrorReporting\DW\Installed 2010-08-31 18:05:53 Slp: Sco: Attempting to get registry value DW0200 2010-08-31 18:05:53 Slp: Submitted 1 of 1 failures to the Watson data repository What the meaning of this? What do i need to do to fix that problem? Here is the Summary file: Overall summary: Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup. Exit code (Decimal): -2068119551 Exit facility code: 1211 Exit error code: 1 Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup. Start time: 2010-08-31 18:03:44 End time: 2010-08-31 18:05:51 Requested action: Install Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20100831_180236\Detail.txt Exception help link: http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.50.1600.1%26EvtType%3d0x6121810A%400xC24842DB Machine Properties: Machine name: NVR Machine processor count: 2 OS version: Windows 7 OS service pack: OS region: United States OS language: English (United States) OS architecture: x86 Process architecture: 32 Bit OS clustered: No Product features discovered: Product Instance Instance ID Feature Language Edition Version Clustered Package properties: Description: SQL Server Database Services 2008 R2 ProductName: SQL Server 2008 R2 Type: RTM Version: 10 SPLevel: 0 Installation location: C:\Disk1\setupsql\x86\setup\ Installation edition: EXPRESS User Input Settings: ACTION: Install ADDCURRENTUSERASSQLADMIN: True AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE AGTSVCPASSWORD: * AGTSVCSTARTUPTYPE: Disabled ASBACKUPDIR: Backup ASCOLLATION: Latin1_General_CI_AS ASCONFIGDIR: Config ASDATADIR: Data ASDOMAINGROUP: ASLOGDIR: Log ASPROVIDERMSOLAP: 1 ASSVCACCOUNT: ASSVCPASSWORD: * ASSVCSTARTUPTYPE: Automatic ASSYSADMINACCOUNTS: ASTEMPDIR: Temp BROWSERSVCSTARTUPTYPE: Automatic CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20100831_180236\ConfigurationFile.ini CUSOURCE: ENABLERANU: True ENU: True ERRORREPORTING: False FARMACCOUNT: FARMADMINPORT: 0 FARMPASSWORD: * FEATURES: SQLENGINE FILESTREAMLEVEL: 0 FILESTREAMSHARENAME: FTSVCACCOUNT: FTSVCPASSWORD: * HELP: False IACCEPTSQLSERVERLICENSETERMS: True INDICATEPROGRESS: False INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\ INSTALLSHAREDWOWDIR: C:\Program Files\Microsoft SQL Server\ INSTALLSQLDATADIR: INSTANCEDIR: C:\Program Files\Microsoft SQL Server\ INSTANCEID: MSSQLSERVER INSTANCENAME: SQLEXPRESS ISSVCACCOUNT: NT AUTHORITY\NetworkService ISSVCPASSWORD: * ISSVCSTARTUPTYPE: Automatic NPENABLED: 0 PASSPHRASE: * PCUSOURCE: PID: * QUIET: False QUIETSIMPLE: True ROLE: AllFeatures_WithDefaults RSINSTALLMODE: FilesOnlyMode RSSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE RSSVCPASSWORD: * RSSVCSTARTUPTYPE: Automatic SAPWD: * SECURITYMODE: SQL SQLBACKUPDIR: SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS SQLSVCACCOUNT: NT Authority\System SQLSVCPASSWORD: * SQLSVCSTARTUPTYPE: Automatic SQLSYSADMINACCOUNTS: SQLTEMPDBDIR: SQLTEMPDBLOGDIR: SQLUSERDBDIR: SQLUSERDBLOGDIR: SQMREPORTING: False TCPENABLED: 1 UIMODE: AutoAdvance X86: False Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20100831_180236\ConfigurationFile.ini Detailed results: Feature: Database Engine Services Status: Failed: see logs for details MSI status: Passed Configuration status: Failed: see details below Configuration error code: 0x0A2FBD17@1211@1 Configuration error description: The process cannot access the file because it is being used by another process. Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20100831_180236\Detail.txt Rules with failures: Global rules: Scenario specific rules: Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20100831_180236\SystemConfigurationCheck_Report.htm What should I do and why does this problem occur? Thanks , Shai.

  Read the article

• QoS for Cisco Router to Prioritize Voice and Interactive Traffic

  - by TJ Huffington

  I have a Cisco 891W NATing Voice and Data to the internet over a 10mbit/2mbit connection. Voice traffic gets degraded when I upload large files. Pings time out as well. I tried to configure a QoS policy but it's basically not doing anything. Voice traffic still degrades when upload bandwidth gets saturated. Here is my current configruation: class-map match-any QoS-Transactional match protocol ssh match protocol xwindows class-map match-any QoS-Voice match protocol rtp audio class-map match-any QoS-Bulk match protocol secure-nntp match protocol smtp match protocol tftp match protocol ftp class-map match-any QoS-Management match protocol snmp match protocol dns match protocol secure-imap class-map match-any QoS-Inter-Video match protocol rtp video class-map match-any QoS-Voice-Control match access-group name Voice-Control policy-map QoS-Priority-Output class QoS-Voice priority percent 25 set dscp ef class QoS-Inter-Video bandwidth remaining percent 10 set dscp af41 class QoS-Transactional bandwidth remaining percent 25 random-detect dscp-based set dscp af21 class QoS-Bulk bandwidth remaining percent 5 random-detect dscp-based set dscp af11 class QoS-Management bandwidth remaining percent 1 set dscp cs2 class QoS-Voice-Control priority percent 5 set dscp ef class class-default fair-queue interface FastEthernet8 bandwidth 1024 bandwidth receive 20480 ip address dhcp ip nat outside ip virtual-reassembly duplex auto speed auto auto discovery qos crypto map mymap max-reserved-bandwidth 80 service-policy output QoS-Priority-Output crypto map mymap 10 ipsec-isakmp set peer 1.2.3.4 default set transform-set ESP-3DES-SHA match address 110 qos pre-classify ! fa8 is my connection to the internet. Voice traffic goes over a VPN ("mymap") to the SIP server. That's why I specified "qos pre-classify" which I believe is the way to classify traffic over the VPN. However even when I ping a public IP while saturating upload bandwidth, the latency is exceptionally high. Is this configuration correct? Are there any suggestions that might make this work for my setup? Thanks in advance.

  Read the article

• QoS for Cisco Router to Prioritize Voice and Interactive Traffic

  - by TJ Huffington

  I have a Cisco 891W NATing Voice and Data to the internet over a 10mbit/2mbit connection. Voice traffic gets degraded when I upload large files. Pings time out as well. I tried to configure a QoS policy but it's basically not doing anything. Voice traffic still degrades when upload bandwidth gets saturated. Here is my current configruation: class-map match-any QoS-Transactional match protocol ssh match protocol xwindows class-map match-any QoS-Voice match protocol rtp audio class-map match-any QoS-Bulk match protocol secure-nntp match protocol smtp match protocol tftp match protocol ftp class-map match-any QoS-Management match protocol snmp match protocol dns match protocol secure-imap class-map match-any QoS-Inter-Video match protocol rtp video class-map match-any QoS-Voice-Control match access-group name Voice-Control policy-map QoS-Priority-Output class QoS-Voice priority percent 25 set dscp ef class QoS-Inter-Video bandwidth remaining percent 10 set dscp af41 class QoS-Transactional bandwidth remaining percent 25 random-detect dscp-based set dscp af21 class QoS-Bulk bandwidth remaining percent 5 random-detect dscp-based set dscp af11 class QoS-Management bandwidth remaining percent 1 set dscp cs2 class QoS-Voice-Control priority percent 5 set dscp ef class class-default fair-queue interface FastEthernet8 bandwidth 1024 bandwidth receive 20480 ip address dhcp ip nat outside ip virtual-reassembly duplex auto speed auto auto discovery qos crypto map mymap max-reserved-bandwidth 80 service-policy output QoS-Priority-Output crypto map mymap 10 ipsec-isakmp set peer 1.2.3.4 default set transform-set ESP-3DES-SHA match address 110 qos pre-classify ! fa8 is my connection to the internet. Voice traffic goes over a VPN ("mymap") to the SIP server. That's why I specified "qos pre-classify" which I believe is the way to classify traffic over the VPN. However even when I ping a public IP while saturating upload bandwidth, the latency is exceptionally high. Is this configuration correct? Are there any suggestions that might make this work for my setup? Thanks in advance.

  Read the article

• ssh tunnel - bind: Cannot assign requested address

  - by JosephK

  Trying to create a socks (-D) ssh tunnel - Linux box to Linux box (both centos): sshd running on remote side ok. From local machine we do / see this: ssh -D 1080 [email protected]. [email protected]'s password: bind: Cannot assign requested address (where 8.8.8.8 is really my server's IP and 'user' is my real username) I am logged into the remote side in this terminal-window. I can verify that the local port was unused prior to this command, and then used by an ssh process, after the command, via: netstat -lnp | grep 1080 So, unlike most googled-responses with this error, the problem would not seem to be the loopback interface assignment. If I try to use this tunnel with a mail client, the local-side permits the attempt (no 'proxy-failed' error), but no data / reply is returned. On the remote side, I do have "PermitTunnel yes" in my sshd_config (though 'yes' should be the default, anyway). Ideas or Clues? Here is the relevant debug-output OpenSSH_5.3p1, OpenSSL 1.0.0-fips 29 Mar 2010 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * .... debug1: Authentication succeeded (password). debug1: Local connections to LOCALHOST:1080 forwarded to remote address socks:0 debug1: Local forwarding listening on 127.0.0.1 port 1080. debug1: channel 0: new [port listener] debug1: Local forwarding listening on ::1 port 1080. bind: Cannot assign requested address debug1: channel 1: new [client-session] debug1: Entering interactive session. debug1: Sending environment. debug1: Sending env LANG = en_US.utf8 Other clue: If I run a Virtual Box on the client running Windows, open a tunnel with putty in that box, that tunnel, to the same remote server, works.

  Read the article

• Nagios returns "No output returned from plugin" running process

  - by user56291

  I have a nagios server and a bunch of nagios clients that i currently monitor. All the clients are setup with the following nrpe configuration. check_users, check_load... metrics are successfully displayed on the nagios interface but check_nginx and check_server_proxy displayed as "Unknown"-(No output returned from plugin). As far as i understood nagios simply runs ps command and looks for either the argument strings or the name of the command to verify whether the service is running. Also with -c flag, one can give nagios a threshold to determine the output (ie: -c 1 returns 'OK' for if it finds at least 1 process.) nrpe_local.cfg: ###################################### # Do any local nrpe configuration here ###################################### allowed_hosts =127.0.0.1,10.0.2.181 command[check_users]=/usr/lib/nagios/plugins/check_users -w 5 -c 10 command[check_load]=/usr/lib/nagios/plugins/check_load -w 15,10,5 -c 30,25,20 command[check_all_disks]=/usr/lib/nagios/plugins/check_disk -w 20% -c 10% command[check_zombie_procs]=/usr/lib/nagios/plugins/check_procs -w 5 -c 10 -s Z command[check_total_procs]=/usr/lib/nagios/plugins/check_procs -w 150 -c 200 command[check_swap]=/usr/lib/nagios/plugins/check_swap -w 50% -c 25% command[check_server_proxy]=/usr/lib/nagios/plugins/check_procs -c 1 -a "api-v1/server.js" command[check_nginx]=/usr/lib/nagios/plugins/check_procs -c 1:30 -C nginx nagios_server.cfg ... define host{ use generic-host ; Name of host template to use host_name plum alias plum address 10.0.2.88 check_command check-host-alive-by-ssh } ... #Check api-proxy-server define service{ use generic-service host_name plum service_description check api proxy service check_command check_nrpe!check_server_proxy } define service { use generic-service ; Name of service template to use host_name plum service_description CHECK_NGINX check_period 24x7 max_check_attempts 3 normal_check_interval 5 retry_check_interval 3 check_command check_nrpe!check_nginx notifications_enabled 1 } Also when i run the command on the nagios client: /usr/lib/nagios/plugins/check_procs -c 1 -a "api-v1/server.js" I get the desired output PROCS OK: 1 process with args 'api-v1/server.js' I would really appreciate any pointers that might help me solve why it nrpe command does not return the desired output on the nagios server panel.

  Read the article

• Arch Linux drops me on my school network.

  - by Kravlin

  I'm running a Lenovo X61 which i carry around my college for getting on the internet at various points in the day. The network has always been finicky but recently it's gotten worse. I'll connect using iwconfig, get an ip from dhcpcd and log in using vpnc to their system. Sometimes I'll stay connected for hours but most of the time within 30 seconds my network traffic will drop to zero and i'll be unable to do anything. My computer still belives it's connected, however to try again i need to put my wireless interface down, put it back up and try again. It's gotten so bad that i've got a window on my computer pinging yahoo or google constantly in order to know if i'm still able to get online. I know other people who have used Arch Linux that don't have the same problems as well as people who use Ubuntu who haven't had any problems either. It seems like my computer is a special case. Does anyone have any suggestions on how to fix it? dmesg doesn't show anything out of the ordinary going on and i don't know where else to look for errors or other things to try.

  Read the article

• "Unable to open MRTG log file" error with nagios and mrtg

  - by Simone Magnaschi

  We have a strange issue with our setup of icinga / nagios and mrtg. Icinga is working great and has no problem, it can monitor basically everything without issues. We setup mrtg to gather bandwith data from our routers and switches. MRTG is working fine: it stores the log data in the /var/www/mrtg/ directory and displays the graph data via web. We assume so MRTG is doing great. We tried to setup bandwidth checks in nagios: define service{ use generic-service ; Inherit values from a template host_name zywall-agora service_description ZYWALL AGORA TRAFFICO check_command check_local_mrtgtraf!/var/www/mrtg/x.x.x.x_2.log!AVG!1000000,2000000!5000000,5000000!1000 check_interval 1 ; Check the service every 1 minute under normal conditions retry_interval 1 ; Re-check every minute until its final/hard state is determined } Where /var/www/mrtg/x.x.x.x_2.log is the correct log path file. We keep on getting Unable to open MRTG log file error in the test result in icinga web interface. We tried everything: give ownership to user nagios or icinga to the log file give chmod 777 to the file try to copy the file in another directory and give it full permission Same error. The strange thing is that if we use the command that nagios generate in a bash session the command works like a charm: /usr/lib64/nagios/plugins/check_mrtgtraf -F /var/www/mrtg/x.x.x.x_2.log -a AVG -w 10,20 -c 5000000,5000000 -e 10 Result: Traffic WARNING - Avg. In = 17.9 KB/s, Avg. Out = 5.0 KB/s|in=17.877930KB/s;10.000000;5000000.000000;0.000000 out=5.000000KB/s;20.000000;5000000.000000;0.000000 We ran that command line as root, as user nagios and as user icinga and all three worked ok. We thought that the command that nagios perform maybe has something wrong in it, so we debugged nagios but we found out that the generated command from nagios is the same as above. Searching on google for these kind of problem returns only issues of systems where mrtg is not installed or issues with the wrong path to the log file, but these seems not to be our case. We are stuck, can somebody help?

  Read the article

• Problems with apache svn server (403 Forbidden)

  - by mrlanrat

  Iv recently setup a SVN server on my papache webserver. I installed USVN http://www.usvn.fr/ to help manage the repositories from a web interface. When I create a repository and try to import code into it from netbeans i get the following error: org.tigris.subversion.javahl.ClientException: RA layer request failed Server sent unexpected return value (403 Forbidden) in response to PROPFIND request for '/svn/python1' I know i have the username and password correct (and I have tried different users) I have done some research and it seems that it is most likely an Apache svn error. Below is the config file for this virtualhost. <VirtualHost *:80> ServerName svn.domain.com ServerAlias www.svn.domain.com ServerAlias admin.svn.domain.com DocumentRoot /home/mrlanrat/domains/svn.domain.com/usvn/public ErrorLog /var/log/virtualmin/svn.domain.com_error_log CustomLog /var/log/virtualmin/svn.domain.com_access_log combined DirectoryIndex index.html index.htm index.php index.php4 index.php5 <Directory "/home/mrlanrat/domains/svn.domain.com/usvn"> Options +SymLinksIfOwnerMatch AllowOverride All Order allow,deny Allow from all </Directory> <Location /svn/> ErrorDocument 404 default DAV svn Require valid-user SVNParentPath /home/mrlanrat/domains/svn.domain.com/usvn/files/svn SVNListParentPath on AuthType Basic AuthName "USVN" AuthUserFile /home/mrlanrat/domains/svn.domain.com/usvn/files/htpasswd AuthzSVNAccessFile /home/mrlanrat/domains/svn.domain.com/usvn/files/authz </Location> </VirtualHost> Can anyone point out what I may have done wrong and how to fix it? I have tested with changing file permissions and changing the configuration with no luck. Thanks in advance!

  Read the article

• Backup Gmail using Mail.app and IMAP without redundancy

  - by Cawas

  I don't care for actually using mail app, I use mostly the gmail interface and mail app just for offline, for quickly reading and eventually replying. Everything is working fine, I think I've followed every guide out there... Here's a great one. But I could find nothing about avoiding redundancy. Well, I can manually do that either by using POP or by checking off most of my labels out of IMAP. But I do use a lot of labels and I often label messages with more than 1 label. And I want them on mail app. Is there anyway to make it keep just 1 copy of repeated messages? Maybe there's a message id or checksum that could be used... If there isn't a way to do it, be assured I still prefer having the extra messages and "wasting" space rather than not having any. edit: I've came across many solutions for finding duplicate files, but they just delete the files. That just make things worst: Mail will just sync it all again. I've realized it's probably better to keep two accounts setup, POP for backup and IMAP for everything else with removing the "All Mail" from it. That's because if the "All Mail" on the server is deleted for any reason, my "All Mail" local will also get deleted, while POP will keep all files regardless of the server. This doesn't solve the redundancy issue at all, but it doesn't create any new issue as well, and I can even use the search properly, without duplicated results, if I search just on the POP. So it helps optimizing a little bit. But I still think the best way to solve this issue would be having something such as aamann's Mail Scripts tweaked to hardlinking the duplicates rather than deleting, and optimized to not need to scan everything every time. I'm trying to contact him and see what we can do. At any pace, I'm still looking for an answer!

  Read the article

< Previous Page | 382 383 384 385 386 387 388 389 390 391 392 393  | Next Page >