Search Results

Search found 10417 results on 417 pages for 'large'.

Page 387/417 | < Previous Page | 383 384 385 386 387 388 389 390 391 392 393 394  | Next Page >

  • segmented reduction with scattered segments

    - by Christian Rau
    I got to solve a pretty standard problem on the GPU, but I'm quite new to practical GPGPU, so I'm looking for ideas to approach this problem. I have many points in 3-space which are assigned to a very small number of groups (each point belongs to one group), specifically 15 in this case (doesn't ever change). Now I want to compute the mean and covariance matrix of all the groups. So on the CPU it's roughly the same as: for each point p { mean[p.group] += p.pos; covariance[p.group] += p.pos * p.pos; ++count[p.group]; } for each group g { mean[g] /= count[g]; covariance[g] = covariance[g]/count[g] - mean[g]*mean[g]; } Since the number of groups is extremely small, the last step can be done on the CPU (I need those values on the CPU, anyway). The first step is actually just a segmented reduction, but with the segments scattered around. So the first idea I came up with, was to first sort the points by their groups. I thought about a simple bucket sort using atomic_inc to compute bucket sizes and per-point relocation indices (got a better idea for sorting?, atomics may not be the best idea). After that they're sorted by groups and I could possibly come up with an adaption of the segmented scan algorithms presented here. But in this special case, I got a very large amount of data per point (9-10 floats, maybe even doubles if the need arises), so the standard algorithms using a shared memory element per thread and a thread per point might make problems regarding per-multiprocessor resources as shared memory or registers (Ok, much more on compute capability 1.x than 2.x, but still). Due to the very small and constant number of groups I thought there might be better approaches. Maybe there are already existing ideas suited for these specific properties of such a standard problem. Or maybe my general approach isn't that bad and you got ideas for improving the individual steps, like a good sorting algorithm suited for a very small number of keys or some segmented reduction algorithm minimizing shared memory/register usage. I'm looking for general approaches and don't want to use external libraries. FWIW I'm using OpenCL, but it shouldn't really matter as the general concepts of GPU computing don't really differ over the major frameworks.

    Read the article

  • Overwhelmed by design patterns... where to begin?

    - by Pete
    I am writing a simple prototype code to demonstrate & profile I/O schemes (HDF4, HDF5, HDF5 using parallel IO, NetCDF, etc.) for a physics code. Since focus is on IO, the rest of the program is very simple: class Grid { public: floatArray x,y,z; }; class MyModel { public: MyModel(const int &nip1, const int &njp1, const int &nkp1, const int &numProcs); Grid grid; map<string, floatArray> plasmaVariables; }; Where floatArray is a simple class that lets me define arbitrary dimensioned arrays and do mathematical operations on them (i.e. x+y is point-wise addition). Of course, I could use better encapsulation (write accessors/setters, etc.), but that's not the concept I'm struggling with. For the I/O routines, I am envisioning applying simple inheritance: Abstract I/O class defines read & write functions to fill in the "myModel" object HDF4 derived class HDF5 HDF5 using parallel IO NetCDF etc... The code should read data in any of these formats, then write out to any of these formats. In the past, I would add an AbstractIO member to myModel and create/destroy this object depending on which I/O scheme I want. In this way, I could do something like: myModelObj.ioObj->read('input.hdf') myModelObj.ioObj->write('output.hdf') I have a bit of OOP experience but very little on the Design Patterns front, so I recently acquired the Gang of Four book "Design Patterns: Elements of Reusable Object-Oriented Software". OOP designers: Which pattern(s) would you recommend I use to integrate I/O with the myModel object? I am interested in answering this for two reasons: To learn more about design patterns in general Apply what I learn to help refactor an large old crufty/legacy physics code to be more human-readable & extensible. I am leaning towards applying the Decerator pattern to myModel, so I can attach the I/O responsibilities dynamically to myModel (i.e. whether to use HDF4, HDF5, etc.). However, I don't feel very confident that this is the best pattern to apply. Reading the Gang of Four book cover-to-cover before I start coding feels like a good way to develop an unhealthy caffeine addiction. What patterns do you recommend?

    Read the article

  • Neo4j 1.9.4 (REST Server,CYPHER) performance issue

    - by user2968943
    I have Neo4j 1.9.4 installed on 24 core 24Gb ram (centos) machine and for most queries CPU usage spikes goes to 200% with only few concurrent requests. Domain: some sort of social application where few types of nodes(profiles) with 3-30 text/array properties and 36 relationship types with at least 3 properties. Most of nodes currently has ~300-500 relationships. Current data set footprint(from console): LogicalLogSize=4294907 (32MB) ArrayStoreSize=1675520 (12MB) NodeStoreSize=1342170 (10MB) PropertyStoreSize=1739548 (13MB) RelationshipStoreSize=6395202 (48MB) StringStoreSize=1478400 (11MB) which is IMHO really small. most queries looks like this one(with more or less WITH .. MATCH .. statements and few queries with variable length relations but the often fast): START targetUser=node({id}), currentUser=node({current}) MATCH targetUser-[contact:InContactsRelation]->n, n-[:InLocationRelation]->l, n-[:InCategoryRelation]->c WITH currentUser, targetUser,n, l,c, contact.fav is not null as inFavorites MATCH n<-[followers?:InContactsRelation]-() WITH currentUser, targetUser,n, l,c,inFavorites, COUNT(followers) as numFollowers RETURN id(n) as id, n.name? as name, n.title? as title, n._class as _class, n.avatar? as avatar, n.avatar_type? as avatar_type, l.name as location__name, c.name as category__name, true as isInContacts, inFavorites as isInFavorites, numFollowers it runs in ~1s-3s(for first run) and ~1s-70ms (for consecutive and it depends on query) and there is about 5-10 queries runs for each impression. Another interesting behavior is when i try run query from console(neo4j) on my local machine many consecutive times(just press ctrl+enter for few seconds) it has almost constant execution time but when i do it on server it goes slower exponentially and i guess it somehow related with my problem. Problem: So my problem is that neo4j is very CPU greedy(for 24 core machine its may be not an issue but its obviously overkill for small project). First time i used AWS EC2 m1.large instance but over all performance was bad, during testing, CPU always was over 100%. Some relevant parts of configuration: neostore.nodestore.db.mapped_memory=1280M wrapper.java.maxmemory=8192 note: I already tried configuration where all memory related parameters where HIGH and it didn't worked(no change at all). Question: Where to digg? configuration? scheme? queries? what i'm doing wrong? if need more info(logs, configs) just ask ;)

    Read the article

  • Css simple style dont work on IE but yes in any other browser

    - by DomingoSL
    Hello guys, i have a simple css file called Titulos.css who contain this: h1 { font: 50px Tahoma, Helvetica, Arial, Sans-Serif; text-align: center; color: #111; text-shadow: 0px 2px 3px #555; } h2 { font: 14px Tahoma, Helvetica, Arial, Sans-Serif; text-align: center; color: #CCC; text-shadow: 0px 1px 2px #555; } h3 { font: 10px Tahoma, Helvetica, Arial, Sans-Serif; text-align: center; color: #CCC; } b1 { font: 16px Tahoma, Helvetica, Arial, Sans-Serif; color: #DDD; } b2 { font: 10px Tahoma, Helvetica, Arial, Sans-Serif; color: #F9F7ED; } .caja { width: 690px; height: 40px; background-color: transparent; border: 0px solid #000000; font-size:x-large; color: #222; font-family: 'Trebuchet MS', 'Lucida Sans Unicode', 'Lucida Grande', 'Lucida Sans', Arial, sans-serif; font-weight: bold;" size="299"; } .style1 { text-align: right; } And a page who call this file like: <link rel="stylesheet" type="text/css" href="LIB/titulos.css" /> Later in this page im trying to use some of the styles like: <div id="todo" align="center" > <div id="cabeza" style="width:850px;height:100px"> </div> <div id="contenido" style="width:850px;height:420px;background-image: url(IMG/cuadro.png)" > <div id="titulo" style="width:765px;height:75px;padding-top: 18px;margin: auto;text-align: left;"> <b1>Bienvenido <b><?php echo($username); ?></b></b1><br> <?php $check = mysql_query("SELECT * FROM sms WHERE ref = '".$username."' ORDER BY fecha DESC LIMIT 0, 1") or die(mysql_error()); while($info = mysql_fetch_array( $check )) { echo("<b1> Tu ultimo mensaje enviado fue: </b1><b2>" . $info['texto'] . " enviado el " . $info['fecha'] . "</b2>"); That only a part of the code of course, the think is, Firefox and Chrome display the code above like this: that as you can see have the styles applied. But when i see the code from IE 8 (even 7 or 6) this is what you see: So, what do you think?

    Read the article

  • LINQ Query Returning Multiple Copies Of First Result

    - by Mike G
    I'm trying to figure out why a simple query in LINQ is returning odd results. I have a view defined in the database. It basically brings together several other tables and does some data munging. It really isn't anything special except for the fact that it deals with a large data set and can be a bit slow. I want to query this view based on a long. Two sample queries below show different queries to this view. var la = Runtime.OmsEntityContext.Positions.Where(p => p.AccountNumber == 12345678).ToList(); var deDa = Runtime.OmsEntityContext.Positions.Where(p => p.AccountNumber == 12345678).Select(p => new { p.AccountNumber, p.SecurityNumber, p.CUSIP }).ToList(); The first one should hand back a List. The second one will be a list of anonymous objects. When I do these queries in entities framework the first one will hand me back a list of results where they're all exactly the same. The second query will hand me back data where the account number is the one that I queried and the other values differ. This seems to do this on a per account number basis, ie if I were to query for one account number or another all the Position objects for one account would have the same value (the first one in the list of Positions for that account) and the second account would have a set of Position objects that all had the same value (again, the first one in it's list of Position objects). I can write SQL that is in effect the same as either of the two EF queries. They both come back with results (say four) that show the correct data, one account number with different securities numbers. Why does this happen??? Is there something that I could be doing wrong so that if I had four results for the first query above that the first record's data also appears in the 2-4th's objects??? I cannot fathom what would/could be causing this. I've searched Google for all kinds of keywords and haven't seen anyone with this issue. We partial class out the Positions class for added functionality (smart object) and some smart properties. There are even some constructors that provide some view model type support. None of this is invoked in the request (I'm 99% sure of this). However, we do this same pattern all over the app. The only thing I can think of is that the mapping in the EDMX is screwy. Is there a way that this would happen if the "primary keys" in the EDMX were not in fact unique given the way the view is constructed? I'm thinking that the dev who imported this model into the EDMX let the designer auto select what would be unique. Any help would give a haggered dev some hope!

    Read the article

  • How to properly downcast in C# with a SWIG generated interface?

    - by JG
    I've got a very large and mature C++ code base that I'm trying to use SWIG on to generate a C# interface for. I cannot change the actual C++ code itself but we can use whatever SWIG offers in the way of extending/updating it. I'm facing an issue where a function C++ is written as such: A* SomeClass::next(A*) The caller might do something like: A* acurr = 0; while( (acurr = sc->next(acurr)) != 0 ){ if( acurr isoftype B ){ B* b = (B*)a; ...do some stuff with b.. } elseif( acurr isoftype C ) ... } Essentially, iterating through a container elements that depending on their true type, do something different. The SWIG generated C# layer for the "next" function unfortunately does the following: return new A(); So the calling code in C# land cannot determine if the returned object is actually a derived class or not, it actually appears to always be the base class (which does make sense). I've come across several solutions: Use the %extend SWIG keyword to add a method on an object and ultimately call dynamic_cast. The downside to this approach, as I see it, is that this requires you to know the inheritance hierarchy. In my case it is rather huge and I see this is as a maintenance issue. Use the %factory keyword to supply the method and the derived types and have SWIG automatically generate the dynamic_cast code. This appears to be a better solution that the first, however upon a deeper look it still requires you to hunt down all the methods and all the possible derived types it could return. Again, a huge maintenance issue. I wish I had a doc link for this but I can't find one. I found out about this functionality by looking through the example code that comes with SWIG. Create a C# method to create an instance of the derived object and transfer the cPtr to the new instance. While I consider this clumsy, it does work. See an example below. public static object castTo(object fromObj, Type toType) { object retval = null; BaseClass fromObj2 = fromObj as BaseClass; HandleRef hr = BaseClass.getCPtr(fromObj2); IntPtr cPtr = hr.Handle; object toObj = Activator.CreateInstance(toType, cPtr, false); // make sure it actually is what we think it is if (fromObj.GetType().IsInstanceOfType(toObj)) { return toObj; } return retval; } Are these really the options? And if I'm not willing to dig through all the existing functions and class derivations, then I'm left with #3? Any help would be appreciated.

    Read the article

  • Is there a scheduling algorithm that optimizes for "maker's schedules"?

    - by John Feminella
    You may be familiar with Paul Graham's essay, "Maker's Schedule, Manager's Schedule". The crux of the essay is that for creative and technical professionals, meetings are anathema to productivity, because they tend to lead to "schedule fragmentation", breaking up free time into chunks that are too small to acquire the focus needed to solve difficult problems. In my firm we've seen significant benefits by minimizing the amount of disruption caused, but the brute-force algorithm we use to decide schedules is not sophisticated enough to handle scheduling large groups of people well. (*) What I'm looking for is if there's are any well-known algorithms which minimize this productivity disruption, among a group of N makers and managers. In our model, There are N people. Each person pi is either a maker (Mk) or a manager (Mg). Each person has a schedule si. Everyone's schedule is H hours long. A schedule consists of a series of non-overlapping intervals si = [h1, ..., hj]. An interval is either free or busy. Two adjacent free intervals are equivalent to a single free interval that spans both. A maker's productivity is maximized when the number of free intervals is minimized. A manager's productivity is maximized when the total length of free intervals is maximized. Notice that if there are no meetings, both the makers and the managers experience optimum productivity. If meetings must be scheduled, then makers prefer that meetings happen back-to-back, while managers don't care where the meeting goes. Note that because all disruptions are treated as equally harmful to makers, there's no difference between a meeting that lasts 1 second and a meeting that lasts 3 hours if it segments the available free time. The problem is to decide how to schedule M different meetings involving arbitrary numbers of the N people, where each person in a given meeting must place a busy interval into their schedule such that it doesn't overlap with any other busy interval. For each meeting Mt the start time for the busy interval must be the same for all parties. Does an algorithm exist to solve this problem or one similar to it? My first thought was that this looks really similar to defragmentation (minimize number of distinct chunks), and there are a lot of algorithms about that. But defragmentation doesn't have much to do with scheduling. Thoughts? (*) Practically speaking this is not really a problem, because it's rare that we have meetings with more than ~5 people at once, so the space of possibilities is small.

    Read the article

  • Soften a colour border, maybe with a gradient, programmatically.

    - by ProfK
    I have a narrow header in corporate colour, bright red, with the content below on a just-off-white background. Ive tried softening the long line where these colours meet using border type divs with intermediate backgrounds, but I think I need the original type curved gradient 'area transitions'. I could copy the 1024px wide, and too narrow (vertically), header gif from their web site, and chop it up for eight border images, but that seems clumsy, and I'm looking for something I can apply anywhere, without needing images. I am able to do round borders in the x-y plane, but I'm curious as to how I can apply a gradient to any chosen colour transition. The extra divs I'm using as border elements above and below '#top-section' arose when I was toying with making many divs for one bordered element. This seemed the ultimate in border manipulation, sans code, but very tedious to spec in CSS and lay out a new border for each bordered element. <div id="topsection"> <div style="float: right; width: 300px; padding-right: 5px;"> <div style="font-size: small; text-align: right;"> Provantage Media Management System</div> <div style="font-size: x-small; text-align: right;"> <asp:LoginStatus ID="loginStatus" runat="server" LoginText="Log in" LogoutText="Log out" /> </div> </div> <span style="padding-left: 15px;">Main Menu</span><span id="content-title"> <asp:ContentPlaceHolder ID="titlePlaceHolder" runat="server"> </asp:ContentPlaceHolder> </span> <div style="background-color: white; height: 2px;"> </div> <div style="background-color: white; height: 3px;"></div> And the CSS: #topsection { background-color: #EB2728; color: white; height: 35px; font-size: large; font-weight: bold; }

    Read the article

  • The best way to separate admin functionality from a public site?

    - by AndrewO
    I'm working on a site that's grown both in terms of user-base and functionality to the point where it's becoming evident that some of the admin tasks should be separate from the public website. I was wondering what the best way to do this would be. For example, the site has a large social component to it, and a public sales interface. But at the same time, there's back office tasks, bulk upload processing, dashboards (with long running queries), and customer relations tools in the admin section that I would like to not be effected by spikes in public traffic (or effect the public-facing response time). The site is running on a fairly standard Rails/MySQL/Linux stack, but I think this is more of an architecture problem than an implementation one: mainly, how does one keep the data and business logic in sync between these different applications? Some strategies that I'm evaluating: 1) Create a slave database of the public facing database on another machine. Extract out all of the model and library code so that it can be shared between the applications. Create new controllers and views for the admin interfaces. I have limited experience with replication and am not even sure that it's supposed to be used this way (most of the time I've seen it, it's been for scaling out the read capabilities of the same application, rather than having multiple different ones). I'm also worried about the potential for latency issues if the slave is not on the same network. 2) Create new more task/department-specific applications and use a message oriented middleware to integrate them. I read Enterprise Integration Patterns awhile back and they seemed to advocate this for distributed systems. (Alternatively, in some cases the basic Rails-style RESTful API functionality might suffice.) But, I have nightmares about data synchronization issues and the massive re-architecting that this would entail. 3) Some mixture of the two. For example, the only public information necessary for some of the back office tasks is a read-only completion time or status. Would it make sense to have that on a completely separate system and send the data to public? Meanwhile, the user/group admin functionality would be run on a separate system sharing the database? The downside is, this seems to keep many of the concerns I have with the first two, especially the re-architecting. I'm sure the answers are going to be highly dependent on a site's specific needs, but I'd love to hear success (or failure) stories.

    Read the article

  • How do I add Objective C code to a FireBreath Project?

    - by jmort253
    I am writing a browser plugin for Mac OS that will place a status bar icon in the status bar, which users can use to interface with the browser plugin. I've successfully built a FireBreath 1.6 project in XCode 4.4.1, and can install it in the browser. However, FireBreath uses C++, whereas a large majority of the existing libraries for Mac OS are written in Objective C. In the /Mac/projectDef.make file, I added the Cocoa Framework and Foundation Framework, as suggested here and in other resources I've found on the Internet: target_link_libraries(${PROJECT_NAME} ${PLUGIN_INTERNAL_DEPS} ${Cocoa.framework} # added line ${Foundation.framework} # added line ) I reran prepmac.sh, expecting a new project to be created in XCode with my .mm files, and .m files; however, it seems that they're being ignored. I only see the .cpp and .h files. I added rules for those in the projectDef.make file, but it doesn't seem to make a difference: file (GLOB PLATFORM RELATIVE ${CMAKE_CURRENT_SOURCE_DIR} Mac/[^.]*.cpp Mac/[^.]*.h Mac/[^.]*.m #added by me Mac/[^.]*.mm #added by me Mac/[^.]*.cmake ) Even if I add the files in manually, I get a series of compilation errors. There are about 20 of them, all related to the file NSObjRuntime.h file: Parse Issue - Expected unqualified-id Parse Issue - Unknown type name 'NSString' Semantic Issue - Use of undeclared identifier 'NSString' Parse Issue - Unknown type name 'NSString' ... ... Semantic Issue - Use of undeclared identifier 'aSelectorName' ... ... Semantic Issue - Use of undeclared identifier 'aClassName' ... It continues like this for some time with similar errors... From what I've read, these errors appear because of dependencies on the Foundation Framework, which I believe I've included in the project. I also tried clicking the project in XCode I'm to the point now where I'm not sure what to try next. People say it's not hard to use Objective C in C/C++ code, but being new to XCode and Objective C might contribute to my confusion. This is only day 4 for me in this new platform. What do I need to do to get XCode to compile the Objective C code? Please remember that I'm a little new to this, so I'd appreciate it if you leave detailed answers as opposed to the vague one-liners that are common in the firebreath tag. I'm just a little in over my head, but if you can get me past this hurdle I'm certain I'll be good to go from there. UPDATE: I edited projects/MyPlugin/CMakeLists.txt and added in the .m and .mm rules there too. after running prepmac.sh, the files are included in the project, but I still get the same compile errors. I moved all the .h files and .mm files from the Obj C code to the MyPlugin root folder and reran the prepmac.sh file. Problem still exists. Same compile errors.

    Read the article

  • In a PHP project, how do you organize and access your helper objects?

    - by Pekka
    How do you organize and manage your helper objects like the database engine, user notification, error handling and so on in a PHP based, object oriented project? Say I have a large PHP CMS. The CMS is organized in various classes. A few examples: the database object user management an API to create/modify/delete items a messaging object to display messages to the end user a context handler that takes you to the right page a navigation bar class that shows buttons a logging object possibly, custom error handling etc. I am dealing with the eternal question, how to best make these objects accessible to each part of the system that needs it. my first apporach, many years ago was to have a $application global that contained initialized instances of these classes. global $application; $application->messageHandler->addMessage("Item successfully inserted"); I then changed over to the Singleton pattern and a factory function: $mh =&factory("messageHandler"); $mh->addMessage("Item successfully inserted"); but I'm not happy with that either. Unit tests and encapsulation become more and more important to me, and in my understanding the logic behind globals/singletons destroys the basic idea of OOP. Then there is of course the possibility of giving each object a number of pointers to the helper objects it needs, probably the very cleanest, resource-saving and testing-friendly way but I have doubts about the maintainability of this in the long run. Most PHP frameworks I have looked into use either the singleton pattern, or functions that access the initialized objects. Both fine approaches, but as I said I'm happy with neither. I would like to broaden my horizon on what is possible here and what others have done. I am looking for examples, additional ideas and pointers towards resources that discuss this from a long-term, real-world perspective. Also, I'm interested to hear about specialized, niche or plain weird approaches to the issue. Bounty I am following the popular vote in awarding the bounty, the answer which is probably also going to give me the most. Thank you for all your answers!

    Read the article

  • Why SQL2008 debugger would NOT step into a certain child stored procedure

    - by John Galt
    I'm encountering differences in T-SQL with SQL2008 (vs. SQL2000) that are leading me to dead-ends. I've verified that the technique of sharing #TEMP tables between a caller which CREATES the #TEMP and the child sProc which references it remain valid in SQL2008 See recent SO question. My core problem remains a critical "child" stored procedure that works fine in SQL2000 but fails in SQL2008 (i.e. a FROM clause in the child sProc is coded as: SELECT * FROM #AREAS A) despite #AREAS being created by the calling parent. Rather than post snippets of the code now, here is another symptom that may help you suggest something. I fired up the new debugger in SQL Mgmt Studio: EXEC dbo.AMS1 @S1='06',@C1='037',@StartDate='01/01/2008',@EndDate='07/31/2008',@Type=1,@ACReq = 1,@Output = 0,@NumofLines = 30,@SourceTable = 'P',@LoanPurposeCatg='P' This is a very large sProc and the key snippet that is weird is the following: **create table #Areas ( State char(2) , County char(3) , ZipCode char(5) NULL , CityName varchar(28) NULL , PData varchar(3) NULL , RData varchar(3) NULL , SMSA_CD varchar(10) NULL , TypeCounty varchar(50) , StateAbbr char(2) ) EXECUTE dbo.AMS_I_GetAreasV5 -- this child populates #Areas @SMSA = @SMSA , @S1 = @S1 , @C1 = @C1 , @Z1 = @Z1 , @SourceTable = @SourceTable , @CustomID = @CustomID , @UserName = @UserName , @CityName = @CityName , @Debug=0 EXECUTE dbo.AMS_I_GetAreas_FixAC -- this child cannot reference #Areas @StartDate = @StartDate , @EndDate = @EndDate , @SMSA_CD = @SMSA_CD , @S1 = @S1 , @C1 = @C1 , @Z1 = @Z1 , @CityName = @CityName , @CustomID = @CustomID , @Debug=0 -- continuation of the parent sProc** I can step through the execution of the parent stored procedure. When I get to the first child sproc above, I can either STEP INTO dbo.AMS_I_GetAreasV5 or STEP OVER its execution. When I arrive at the invocation of the 2nd child sProc - dbo.AMS_I_GetAreas_FixAC - I try to STEP INTO it (because that is where the problem statement is) and STEP INTO is ignored (i.e. treated like STEP OVER instead; yet I KNOW I pressed F11 not F10). It WAS executed however, because when control is returned to the statement after the EXECUTE, I click Continue to finish execution and the results windows shows the errors in the dbo.AMS_I_GetAreas_FixAC (i.e. the 2nd child) stored procedure. Is there a way to "pre-load" an sProc with the goal of setting a breakpoint on its entry so that I can pursue execution inside it? In summary, I wonder if the inability to step into a given child sproc might be related to the same inability of this particular child to reference a #temp created by its parent (caller).

    Read the article

  • Reading and writing C++ vector to a file

    - by JB
    For some graphics work I need to read in a large amount of data as quickly as possible and would ideally like to directly read and write the data structures to disk. Basically I have a load of 3d models in various file formats which take too long to load so I want to write them out in their "prepared" format as a cache that will load much faster on subsequent runs of the program. Is it safe to do it like this? My worries are around directly reading into the data of the vector? I've removed error checking, hard coded 4 as the size of the int and so on so that i can give a short working example, I know it's bad code, my question really is if it is safe in c++ to read a whole array of structures directly into a vector like this? I believe it to be so, but c++ has so many traps and undefined behavour when you start going low level and dealing directly with raw memory like this. I realise that number formats and sizes may change across platforms and compilers but this will only even be read and written by the same compiler program to cache data that may be needed on a later run of the same program. #include <fstream> #include <vector> using namespace std; struct Vertex { float x, y, z; }; typedef vector<Vertex> VertexList; int main() { // Create a list for testing VertexList list; Vertex v1 = {1.0f, 2.0f, 3.0f}; list.push_back(v1); Vertex v2 = {2.0f, 100.0f, 3.0f}; list.push_back(v2); Vertex v3 = {3.0f, 200.0f, 3.0f}; list.push_back(v3); Vertex v4 = {4.0f, 300.0f, 3.0f}; list.push_back(v4); // Write out a list to a disk file ofstream os ("data.dat", ios::binary); int size1 = list.size(); os.write((const char*)&size1, 4); os.write((const char*)&list[0], size1 * sizeof(Vertex)); os.close(); // Read it back in VertexList list2; ifstream is("data.dat", ios::binary); int size2; is.read((char*)&size2, 4); list2.resize(size2); // Is it safe to read a whole array of structures directly into the vector? is.read((char*)&list2[0], size2 * sizeof(Vertex)); }

    Read the article

  • How to learn proper C++?

    - by Chris
    While reading a long series of really, really interesting threads, I've come to a realization: I don't think I really know C++. I know C, I know classes, I know inheritance, I know templates (& the STL) and I know exceptions. Not C++. To clarify, I've been writing "C++" for more than 5 years now. I know C, and I know that C and C++ share a common subset. What I've begun to realize, though, is that more times than not, I wind up treating C++ something vaguely like "C with classes," although I do practice RAII. I've never used Boost, and have only read up on TR1 and C++0x - I haven't used any of these features in practice. I don't use namespaces. I see a list of #defines, and I think - "Gracious, that's horrible! Very un-C++-like," only to go and mindlessly write class wrappers for the sake of it, and I wind up with large numbers (maybe a few per class) of static methods, and for some reason, that just doesn't seem right lately. The professional in me yells "just get the job done," the academic yells "you should write proper C++ when writing C++" and I feel like the point of balance is somewhere in between. I'd like to note that I don't want to program "pure" C++ just for the sake of it. I know several languages. I have a good feel for what "Pythonic" is. I know what clean and clear PHP is. Good C code I can read and write better than English. The issue is that I learned C by example, and picked up C++ as a "series of modifications" to C. And a lot of my early C++ work was creating class wrappers for C libraries. I feel like my own personal C-heavy background while learning C++ has sort of... clouded my acceptance of C++ in it's own right, as it's own language. Do the weathered C++ lags here have any advice for me? Good examples of clean, sharp C++ to learn from? What habits of C does my inner-C++ really need to break from? My goal here is not to go forth and trumpet "good" C++ paradigm from rooftops for the sake of it. C and C++ are two different languages, and I want to start treating them that way. How? Where to start? Thanks in advance! Cheers, -Chris

    Read the article

  • Algorithm to split an article without breaking the reading flow or HTML code

    - by Victor Stanciu
    Hello, I have a very large database of articles, of varying lengths. The articles have HTML elements in them. I have to insert some ads (simple <script> elements) in the body of each article when it is displayed (I know, I hate ads that interrupt my reading too). Now, the problem is that each ad must be inserted at about the same position in each article. The simplest solution is to simply split the article on a fixed number of characters (without breaking words), and insert the ad code. This, however, runs the risk of inserting the ad in the middle of a HTML tag. I could go the regex way, but I was thinking about the following solution, using JS: Establish a character count threshold. For example, "the add should be inserted at about 200 words" Set accepted deviations in each direction, say -20, +20 characters. Loop through each text node inside the article, and while doing so, keep count of the total number of characters so far Once the count exceeds the threshold, make the following decision: 4.1. If count exceeds the threshold by a value lower that the positive accepted deviation (for example, 17 characters), insert the ad code just after the current text node. 4.2. If the count is greater than the sum of the threshold and the deviation, roll back to the previous text node, and make the same decision, only this time use the previous count and check if it's lower than the difference between the threshold and the deviation, and if not, insert the ad between the current node and the previous one. 4.3. If the 4.1 and 4.2 fail (which means that the previous node reached a too low character count and the current node a too high one), insert the ad after whatever character count is needed inside the current element. I know it's convoluted, but it's the first thing out of my mind and it has the advantage that, by trying to insert the ad between text nodes, perhaps it will not break the flow of the article as bad as it would if I would just stick it in (like the final 4.3 case) Here is some pseudo-code I put together, I don't trust my english-explaining skills: threshold = 200 deviation = 20 current_count = 0 for each node in article_nodes { previous_count = current_count current_count = current_count + node.length if current_count < threshold { continue // next interation } if current_count > threshold + deviation { if previous_count < threshdold - deviation { // insert ad in current node } else { // insert ad between the current and previous nodes } } else { // insert ad after the current node } break; } Am I over-complicating stuff, or am I missing a simpler, more elegant solution?

    Read the article

  • Stuck at being unable to print a substring no more than 4679 characters

    - by Newcoder
    I have a program that does string manipulation on very large strings (around 100K). The first step in my program is to cleanup the input string so that it only contains certain characters. Here is my method for this cleanup: public static String analyzeString (String input) { String output = null; output = input.replaceAll("[-+.^:,]",""); output = output.replaceAll("(\\r|\\n)", ""); output = output.toUpperCase(); output = output.replaceAll("[^XYZ]", ""); return output; } When i print my 'input' string of length 97498, it prints successfully. My output string after cleanup is of length 94788. I can print the size using output.length() but when I try to print this in Eclipse, output is empty and i can see in eclipse output console header. Since this is not my final program, so I ignored this and proceeded to next method that does pattern matching on this 'cleaned-up' string. Here is code for pattern matching: public static List<Integer> getIntervals(String input, String regex) { List<Integer> output = new ArrayList<Integer> (); // Do pattern matching Pattern p1 = Pattern.compile(regex); Matcher m1 = p1.matcher(input); // If match found while (m1.find()) { output.add(m1.start()); output.add(m1.end()); } return output; } Based on this program, i identify the start and end intervals of my pattern match as 12351 and 87314. I tried to print this match as output.substring(12351, 87314) and only get blank output. Numerous hit and trial runs resulted in the conclusion that biggest substring that i can print is of length 4679. If i try 4680, i again get blank input. My confusion is that if i was able to print original string (97498) length, why i couldnt print the cleaned-up string (length 94788) or the substring (length 4679). Is it due to regular expression implementation which may be causing some memory issues and my system is not able to handle that? I have 4GB installed memory.

    Read the article

  • Ideas for designing an automated content tagging system needed

    - by Benjamin Smith
    I am currently designing a website that amongst other is required to display and organise small amounts of text content (mainly quotes, article stubs, etc.). I currently have a database with 250,000+ items and need to come up with a method of tagging each item with relevant tags which will eventually allow for easy searching/browsing of the content for users. A very simplistic idea I have (and one that I believe is employed by some sites that I have been looking to for inspiration (http://www.brainyquote.com/quotes/topics.html)), is to simply search the database for certain words or phrases and use these words as tags for the content. This can easily be extended so that if for example a user wanted to show all items with a theme of love then I would just return a list of items with words and phrases relating to this theme. This would not be hard to implement but does not provide very good results. For example if I were to search for the month 'May' in the database with the aim of then classifying the items returned as realting to the topic of Spring then I would get back all occurrences of the word May, regardless of the semantic meaning. Another shortcoming of this method is that I believe it would be quite hard to automate the process to any large scale. What I really require is a library that can take an item, break it down and analyse the semantic meaning and also return a list of tags that would correctly classify the item. I know this is a lot to ask and I have a feeling I will end up reverting to the aforementioned method but I just thought I should ask if anyone knew of any pre-existing solution. I think that as the items in the database are short then it is probably quite a hard task to analyse any meaning from them however I may be mistaken. Another path to possibly go down would be to use something like amazon turk to outsource the task which may produce good results but would be expensive. Eventually I would like users to be able to (and want to!) tag content and to vote for the most relevant tags, possibly using a gameification mechanic as motivation however this is some way down the line. A temporary fix may be the best thing if this were the route I decided to go down as I could use the rough results I got as the starting point for a more in depth solution. If you've read this far, thanks for sticking with me, I know I'm spitballing but any input would be really helpful. Thanks.

    Read the article

  • Sorting a list of colors in one dimension?

    - by Ptah- Opener of the Mouth
    I would like to sort a one-dimensional list of colors so that colors that a typical human would perceive as "like" each other are near each other. Obviously this is a difficult or perhaps impossible problem to get "perfectly", since colors are typically described with three dimensions, but that doesn't mean that there aren't some sorting methods that look obviously more natural than others. For example, sorting by RGB doesn't work very well, as it will sort in the following order, for example: (1) R=254 G=0 B=0 (2) R=254 G=255 B=0 (3) R=255 G=0 B=0 (4) R=255 G=255 B=0 That is, it will alternate those colors red, yellow, red, yellow, with the two "reds" being essentially imperceivably different than each other, and the two yellows also being imperceivably different from each other. But sorting by HLS works much better, generally speaking, and I think HSL even better than that; with either, the reds will be next to each other, and the yellows will be next to each other. But HLS/HSL has some problems, too; things that people would perceive as "black" could be split far apart from each other, as could things that people would perceive as "white". Again, I understand that I pretty much have to accept that there will be some splits like this; I'm just wondering if anyone has found a better way than HLS/HSL. And I'm aware that "better" is somewhat arbitrary; I mean "more natural to a typical human". For example, a vague thought I've had, but have not yet tried, is perhaps "L is the most important thing if it is very high or very low", but otherwise it is the least important. Has anyone tried this? Has it worked well? What specifically did you decide "very low" and "very high" meant? And so on. Or has anyone found anything else that would improve upon HSL? I should also note that I am aware that I can define a space-filling curve through the cube of colors, and order them one-dimensionally as they would be encountered while travelling along that curve. That would eliminate perceived discontinuities. However, it's not really what I want; I want decent overall large-scale groupings more than I want perfect small-scale groupings. Thanks in advance for any help.

    Read the article

  • HttpWebRequest possibly slowing website

    - by Steven Smith
    Using Visual studio 2012, C#.net 4.5 , SQL Server 2008, Feefo, Nopcommerce Hey guys I have Recently implemented a new review service into a current site we have. When the change went live the first day all worked fine. Since then though the sending of sales to Feefo hasnt been working, There are no logs either of anything going wrong. In the OrderProcessingService.cs in Nop Commerce's Service, i call a HttpWebrequest when an order has been confirmed as completed. Here is the code. var email = HttpUtility.UrlEncode(order.Customer.Email.ToString()); var name = HttpUtility.UrlEncode(order.Customer.GetFullName().ToString()); var description = HttpUtility.UrlEncode(productVariant.ProductVariant.Product.MetaDescription != null ? productVariant.ProductVariant.Product.MetaDescription.ToString() : "product"); var orderRef = HttpUtility.UrlEncode(order.Id.ToString()); var productLink = HttpUtility.UrlEncode(string.Format("myurl/p/{0}/{1}", productVariant.ProductVariant.ProductId, productVariant.ProductVariant.Name.Replace(" ", "-"))); string itemRef = ""; try { itemRef = HttpUtility.UrlEncode(productVariant.ProductVariant.ProductId.ToString()); } catch { itemRef = "0"; } var url = string.Format("feefo Url", login, password,email,name,description,orderRef,productLink,itemRef); var request = (HttpWebRequest)WebRequest.Create(url); request.KeepAlive = false; request.Timeout = 5000; request.Proxy = null; using (var response = (HttpWebResponse)request.GetResponse()) { if (response.StatusDescription == "OK") { var stream = response.GetResponseStream(); if(stream != null) { using (var reader = new StreamReader(stream)) { var content = reader.ReadToEnd(); } } } } So as you can see its a simple webrequest that is processed on an order, and all product variants are sent to feefo. Now: this hasnt been happening all week since the 15th (day of the implementation) the site has been grinding to a halt recently. The stream and reader in the the var content is there for debugging. Im wondering does the code redflag anything to you that could relate to the process of website? Also note i have run some SQL statements to see if there is any deadlocks or large escalations, so far seems fine, Logs have also been fine just the usual logging of Bots. Any help would be much appreciated! EDIT: also note that this code is in a method that is called and wrapped in A try catch UPDATE: well forget about the "not sending", thats because i was just told my code was rolled back last week

    Read the article

  • SQL/Schema comparison and upgrade

    - by Workshop Alex
    I have a simple situation. A large organisation is using several different versions of some (desktop) application and each version has it's own database structure. There are about 200 offices and each office will have it's own version, which can be one of 7 different ones. The company wants to upgrade all applications to the latest versions, which will be version 8. The problem is that they don't have a separate database for each version. Nor do they have a separate database for each office. They have one single database which is handled by a dedicated server, thus keeping things like management and backups easier. Every office has it's own database schema and within the schema there's the whole database structure for their specific application version. As a result, I'm dealing with 200 different schema's which need to be upgraded, each with 7 possible versions. Fortunately, every schema knows the proper version so checking the version isn't difficult. But my problem is that I need to create upgrade scripts which can upgrade from version 1 to version 2 to version 3 to etc... Basically, all schema's need to be bumped up one version until they're all version 8. Writing the code that will do this is no problem. the challenge is how to create the upgrade script from one version to the other? Preferably with some automated tool. I've examined RedGate's SQL Compare and Altova's DatabaseSpy but they're not practical. Altova is way too slow. RedGate requires too much processing afterwards, since the generated SQL Script still has a few errors and it refers to the schema name. Furthermore, the code needs to become part of a stored procedure and the code generated by RedGate doesn't really fit inside a single procedure. (Plus, it's doing too much transaction-handling, while I need everything within a single transaction. I have been considering using another SQL Comparison tool but it seems to me that my case is just too different from what standard tools can deliver. So I'm going to write my own comparison tool. To do this, I'll be using ADOX with Delphi to read the catalogues for every schema version in the database, then use this to write the SQL Statements that will need to upgrade these schema's to their next version. (Comparing 1 with 2, 2 with 3, 3 with 4, etc.) I'm not unfamiliar with generating SQL-Script-Generators so I don't expect too many problems. And I'll only be upgrading the table structures, not any of the other database objects. So, does anyone have some good tips and tricks to apply when doing this kind of comparisons? Things to be aware of? Practical tips to increase speed?

    Read the article

  • How do I handle the Maybe result of at in Control.Lens.Indexed without a Monoid instance

    - by Matthias Hörmann
    I recently discovered the lens package on Hackage and have been trying to make use of it now in a small test project that might turn into a MUD/MUSH server one very distant day if I keep working on it. Here is a minimized version of my code illustrating the problem I am facing right now with the at lenses used to access Key/Value containers (Data.Map.Strict in my case) {-# LANGUAGE OverloadedStrings, GeneralizedNewtypeDeriving, TemplateHaskell #-} module World where import Control.Applicative ((<$>),(<*>), pure) import Control.Lens import Data.Map.Strict (Map) import qualified Data.Map.Strict as DM import Data.Maybe import Data.UUID import Data.Text (Text) import qualified Data.Text as T import System.Random (Random, randomIO) newtype RoomId = RoomId UUID deriving (Eq, Ord, Show, Read, Random) newtype PlayerId = PlayerId UUID deriving (Eq, Ord, Show, Read, Random) data Room = Room { _roomId :: RoomId , _roomName :: Text , _roomDescription :: Text , _roomPlayers :: [PlayerId] } deriving (Eq, Ord, Show, Read) makeLenses ''Room data Player = Player { _playerId :: PlayerId , _playerDisplayName :: Text , _playerLocation :: RoomId } deriving (Eq, Ord, Show, Read) makeLenses ''Player data World = World { _worldRooms :: Map RoomId Room , _worldPlayers :: Map PlayerId Player } deriving (Eq, Ord, Show, Read) makeLenses ''World mkWorld :: IO World mkWorld = do r1 <- Room <$> randomIO <*> (pure "The Singularity") <*> (pure "You are standing in the only place in the whole world") <*> (pure []) p1 <- Player <$> randomIO <*> (pure "testplayer1") <*> (pure $ r1^.roomId) let rooms = at (r1^.roomId) ?~ (set roomPlayers [p1^.playerId] r1) $ DM.empty players = at (p1^.playerId) ?~ p1 $ DM.empty in do return $ World rooms players viewPlayerLocation :: World -> PlayerId -> RoomId viewPlayerLocation world playerId= view (worldPlayers.at playerId.traverse.playerLocation) world Since rooms, players and similar objects are referenced all over the code I store them in my World state type as maps of Ids (newtyped UUIDs) to their data objects. To retrieve those with lenses I need to handle the Maybe returned by the at lens (in case the key is not in the map this is Nothing) somehow. In my last line I tried to do this via traverse which does typecheck as long as the final result is an instance of Monoid but this is not generally the case. Right here it is not because playerLocation returns a RoomId which has no Monoid instance. No instance for (Data.Monoid.Monoid RoomId) arising from a use of `traverse' Possible fix: add an instance declaration for (Data.Monoid.Monoid RoomId) In the first argument of `(.)', namely `traverse' In the second argument of `(.)', namely `traverse . playerLocation' In the second argument of `(.)', namely `at playerId . traverse . playerLocation' Since the Monoid is required by traverse only because traverse generalizes to containers of sizes greater than one I was now wondering if there is a better way to handle this that does not require semantically nonsensical Monoid instances on all types possibly contained in one my objects I want to store in the map. Or maybe I misunderstood the issue here completely and I need to use a completely different bit of the rather large lens package?

    Read the article

  • When to call glEnable(GL_FRAMEBUFFER_SRGB)?

    - by Steven Lu
    I have a rendering system where I draw to an FBO with a multisampled renderbuffer, then blit it to another FBO with a texture in order to resolve the samples in order to read off the texture to perform post-processing shading while drawing to the backbuffer (FBO index 0). Now I'd like to get some correct sRGB output... The problem is the behavior of the program is rather inconsistent between when I run it on OS X and Windows and this also changes depending on the machine: On Windows with the Intel HD 3000 it will not apply the sRGB nonlinearity but on my other machine with a Nvidia GTX 670 it does. On the Intel HD 3000 in OS X it will also apply it. So this probably means that I'm not setting my GL_FRAMEBUFFER_SRGB enable state at the right points in the program. However I can't seem to find any tutorials that actually tell me when I ought to enable it, they only ever mention that it's dead easy and comes at no performance cost. I am currently not loading in any textures so I haven't had a need to deal with linearizing their colors yet. To force the program to not simply spit back out the linear color values, what I have tried is simply comment out my glDisable(GL_FRAMEBUFFER_SRGB) line, which effectively means this setting is enabled for the entire pipeline, and I actually redundantly force it back on every frame. I don't know if this is correct or not. It certainly does apply a nonlinearization to the colors but I can't tell if this is getting applied twice (which would be bad). It could apply the gamma as I render to my first FBO. It could do it when I blit the first FBO to the second FBO. Why not? I've gone so far as to take screen shots of my final frame and compare raw pixel color values to the colors I set them to in the program: I set the input color to RGB(1,2,3) and the output is RGB(13,22,28). That seems like quite a lot of color compression at the low end and leads me to question if the gamma is getting applied multiple times. I have just now gone through the sRGB equation and I can verify that the conversion seems to be only applied once as linear 1/255, 2/255, and 3/255 do indeed map to sRGB 13/255, 22/255, and 28/255 using the equation 1.055*C^(1/2.4)+0.055. Given that the expansion is so large for these low color values it really should be obvious if the sRGB color transform is getting applied more than once. So, I still haven't determined what the right thing to do is. does glEnable(GL_FRAMEBUFFER_SRGB) only apply to the final framebuffer values, in which case I can just set this during my GL init routine and forget about it hereafter?

    Read the article

  • Modular GWT design concerns

    - by GlGuru
    Hi, I have a couple of questions regarding a modular GWT based application framework. I have some ideas about them but being new to the field of web development I feel they are far from ideal. I'd appreciate a few comments and suggestions in this regard. Here are my questions: I am developing a framework which will allow third parties to embed GWT applications into our website and do some communication with them using simple iFrame postMessage. All these third party modules are going to use our SDK which is also GWT based. The problem arises that even though all the modules will be using the same codebase there is going to be a massive overheard in the amount of duplicate Javascript code (i.e. our common SDK code base which is quite large) being downloaded on the client's machine. This is highly redundant and problematic, not only due to the sheer size of duplicate code but, also due to the fact that subsequent updates of the SDK would require the modules to be recompiled which is going to create a DLL hell kind of scenario in the long run. What is the best way of doing this kind of thing? Is there a way where I can have some static GWT code (i.e. the SDK) and the dynamic GWT module refers to it (even if lies on a different domain) and it all work happily? The other part of the problem lies in providing robust scripting front end to the SDK. At first it appears to be trivial since Javascript itself is a scripting language. However, I do not know how to load and call a piece of pure Javascript code at runtime? I am willing to put restrictions on the target Javascript (i.e. having a function main and unique namespace or something). Furthermore the Javascript will come as a string from a database and not as a full URL. If its doable in Javascript how does one get this right in GWT i.e. forcing the compiler to emit a certain function in the generated Javascript? This I believe can be lesser of a problem by having a stub Javascript with all the right requirements which just loads up a GWT generated Javascript. Is any of this possible at all? I generally hate to be this verbose but I hope to find a quick solution to the problem as its holding up my progress. I'd highly appreciate any comments, suggestions and experiences.

    Read the article

  • Runtime.exec causes duplicate JVM to hang indefinitely until killed (Solaris 10)

    - by John
    All, We are running a J2EE application on WebLogic server 9.2 MP2 with a jrockit 64-bit JVM (27.3.1) on Solaris 10. We call use runtime.exec to call an executable called jfmerge to create PDF documents. We have found that in Solaris, when runtime.exec is called, a duplicate JVM is temporarily spawned to kick off the jfmerge process. While this is inefficient (our JVM is 5 GB, thus the duplicated shell JVM is also 5 GB), the major problem lies in the fact that when there is heavy load on this functionality (PDF generation) in our application, sometimes the duplicated JVM never exits. When the JVM hangs, the servers create large issues (extreme application slowness and terminated user sessions) as the entire duplicate JVM get's all of its 5 GB of process size written to disk swap. We have noted the following hung thread correlated with a hung JVM process until the process is manually killed: "[STUCK] ExecuteThread: '17' for queue: 'weblogic.kernel.Default (self-tuning)'" id=3463 idx=0x158 tid=3460 prio=1 alive, in native, daemon at jrockit/io/FileNativeIO.readBytesPinned(Ljava/io/FileDescriptor;[BII)I(Native Method) at jrockit/io/FileNativeIO.readBytes(FileNativeIO.java:30) at java/io/FileInputStream.readBytes([BII)I(FileInputStream.java) at java/io/FileInputStream.read(FileInputStream.java:194) at java/lang/UNIXProcess$DeferredCloseInputStream.read(UNIXProcess.java:227) at java/io/BufferedInputStream.fill(BufferedInputStream.java:218) at java/io/BufferedInputStream.read(BufferedInputStream.java:235) ^-- Holding lock: java/io/BufferedInputStream@0xfffffffec6510470[thin lock] at gov/v3/common/formgeneration/sessionbean/FormsBean.getProcessStatus(FormsBean.java:809) at gov/v3/common/formgeneration/sessionbean/FormsBean.createPDF(FormsBean.java:750) at gov/v3/common/formgeneration/sessionbean/FormsBean.getTemplateDetails(FormsBean.java:450) at gov/v3/common/formgeneration/sessionbean/FormsBean.generateSinglePDF(FormsBean.java:1371) at gov/v3/common/formgeneration/sessionbean/FormsBean.generatePDF(FormsBean.java:263) at gov/v3/common/formgeneration/sessionbean/FormsBean.endorseDocument(FormsBean.java:2377) at gov/v3/common/formgeneration/sessionbean/Forms_qaco28_EOImpl.endorseDocument(Forms_qaco28_EOImpl.java:214) at gov/v3/delegates/common/FormsAndNoticesDelegate.endorseDocument(FormsAndNoticesDelegate.java:128) at gov/v3/actions/common/EndorseDocumentAction.executeRequest(EndorseDocumentAction.java:68) at gov/v3/fwk/controller/struts/action/V3CommonDispatchAction.dispatchToExecuteMethod(V3CommonDispatchAction.java:532) at gov/v3/fwk/controller/struts/action/V3CommonDispatchAction.executeBaseAction(V3CommonDispatchAction.java:336) at gov/v3/fwk/controller/struts/action/V3BaseDispatchAction.execute(V3BaseDispatchAction.java:69) at org/apache/struts/action/RequestProcessor.processActionPerform(RequestProcessor.java:484) at gov/v3/fwk/controller/struts/requestprocessor/V3TilesRequestProcessor.processActionPerform(V3TilesRequestProcessor.java:384) at org/apache/struts/action/RequestProcessor.process(RequestProcessor.java:274) at org/apache/struts/action/ActionServlet.process(ActionServlet.java:1482) at org/apache/struts/action/ActionServlet.doGet(ActionServlet.java:507) at gov/v3/fwk/controller/struts/servlet/V3ControllerServlet.doGet(V3ControllerServlet.java:110) at javax/servlet/http/HttpServlet.service(HttpServlet.java:743) at javax/servlet/http/HttpServlet.service(HttpServlet.java:856) at weblogic/servlet/internal/StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic/servlet/internal/StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic/servlet/internal/ServletStubImpl.execute(ServletStubImpl.java:283) at weblogic/servlet/internal/ServletStubImpl.execute(ServletStubImpl.java:175) at weblogic/servlet/internal/WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3231) at weblogic/security/acl/internal/AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic/security/service/SecurityManager.runAs(SecurityManager.java:121) at weblogic/servlet/internal/WebAppServletContext.securedExecute(WebAppServletContext.java:2002) at weblogic/servlet/internal/WebAppServletContext.execute(WebAppServletContext.java:1908) at weblogic/servlet/internal/ServletRequestImpl.run(ServletRequestImpl.java:1362) at weblogic/work/ExecuteThread.execute(ExecuteThread.java:209) at weblogic/work/ExecuteThread.run(ExecuteThread.java:181) at jrockit/vm/RNI.c2java(JJJJJ)V(Native Method) -- end of trace We would like to do a couple of things: 1.) Prevent the spawning of a duplicate JVM, as we do not need any of it's functions when executing the simple jfmerge executable, and it creates massive overhead. 2.) In the short term at least prevent this duplicate JVM from handing indefinitely.

    Read the article

  • XSLT: How to remove the self-closed elment

    - by Daoming Yang
    I have a large xml file which contents a lot of self-closed tags. How could remove all them by using XSLT. eg. <?xml version="1.0" encoding="utf-8" ?> <Persons> <Person> <Name>user1</Name> <Tel /> <Mobile>123</Mobile> </Person> <Person> <Name>user2</Name> <Tel>456</Tel> <Mobile /> </Person> <Person> <Name /> <Tel>123</Tel> <Mobile /> </Person> <Person> <Name>user4</Name> <Tel /> <Mobile /> </Person> </Persons> I'm expecting the result: <?xml version="1.0" encoding="utf-8" ?> <Persons> <Person> <Name>user1</Name> <Mobile>123</Mobile> </Person> <Person> <Name>user2</Name> <Tel>456</Tel> </Person> <Person> <Tel>123</Tel> </Person> <Person> <Name>user4</Name> </Person> </Persons> Note: there are thousands of different elements, how can I programmatically remove all the self-closed tags. Another question is how to remove the empty element such as <name></name> as well. Can anyone help me on this? Many thanks.

    Read the article

< Previous Page | 383 384 385 386 387 388 389 390 391 392 393 394  | Next Page >