Search Results

Search found 19393 results on 776 pages for 'reference count'.

Page 387/776 | < Previous Page | 383 384 385 386 387 388 389 390 391 392 393 394  | Next Page >

• How do laptop battery voltages affect runtime?

  - by Bigbio2002

  I ordered a new battery for my faithful XPS M1710. I'm not sure of the voltage of the battery I have now, but the new one that the Dell rep got me (after 3-4 times confirming my phone number and laptop model number) is 14.8v. I was a bit concerned about potential incompatibilities (as most of the other compatible batteries listed were 11.1v), but I figure that there's no way that Dell would "recommend" batteries that wouldn't work or fry your system. Now, my question is, how does voltage affect battery life? If we assume the needed power draw to be constant, a higher voltage would indicate less amperage needed, therefore the battery would last longer before running out, yes? Or am I missing something? For reference: P=I*V P = power I = current V = voltage (duh)

  Read the article

• How does a winkydink Teradici offer high res, full FPS, 3D rendering on ESXi 5 VDIs for AutoCAD/SolidWorks/1080p YouTube applications?

  - by BlueToast

  How does such a small Teradici card ![enter image description here][1] offer high resolution, full FPS 3D graphics (1:38) http://www.youtube.com/watch?v=eXA4QMmfY5Y&feature=player_detailpage#t=97s for ESXi 5.0/5.1 VDI environments? We're shooting for an AutoCAD/SolidWorks/YouTube 1080p capable environment. I can't see how such a small and low profile card could possibly have the horsepower to handle such GPU computations for a big environment like that. We're going to have up to 64 VDIs per server, and are a 500-1000 employee count sized company. Someone enlighten me please! Determining which route to go (between RemoteFX and VMware View/PCoIP) and the hardware (NVIDIA 4GB non-Quadro/Tesla GPUs vs Teradici card). Servers have three 4x, three 8x, and one 16x PCI-E lane. Two of the 8x lanes will be occupied by SAS RAID cards.

  Read the article

• The very bare minimum of latex to compile documents

  - by ldigas

  I'm creating a relatively small console program which will be used by some other people as well. As part of its output it will be creating a tex file which will contain some two tables, a few rows of text and one plot. Not, my program is pretty small - under a Mb. The problem is I can't count on my users to have latex installed, so I'd like to include the very bare minimum required files to create it (pdf). What would be a good place to start searching on that topic, or even better, does anyone know what I would need to include with it to accomplish that ? I remember my last latex install being pretty ... well, gigantic. Kind regards !

  Read the article

• What is the value/cost of enabling "spread spectrum clocking" on my hard drives?

  - by Stu Thompson

  I'm building up a biggish NAS box (10x WD RE4 2TB SATA RAID10) and ran into some problems. During the course of my research, debugging, investigations, etc, I discovered a jumper on the physical drives labeled "spread spectrum clocking". After some googling about this on teh internets, it seems to be a feature that some suggest (without reference or explanation) enabling in 'a storage configuration' that makes the drive less sussesptable to EMI. But why? I've got three core questions: Why is this feature not enabled by default? What are the actual benefits? Are there any costs?

  Read the article

• How to charge an iPhone on a Windows PC without Installing iTunes

  - by Martin Hollingsworth

  I want to be able to charge my iPhone on my work computer, which is running Windows Server 2008 SP1 64-Bit. When I plug the iPhone in with the USB cable, it will not charge. Windows attempts to locate a driver for the device but only comes up with a generic Camera device and even if I allow that to be installed, the iPhone still does not charge. I have checked the computer's BIOS settings and did not find anything relating to power on the USB devices. I also tried this on ports at the back of the computer in addition to those on the front. The PC is a Dell Optiplex 780. As far as I can tell USB devices do not charge unless Windows has installed an appropriate driver. Since it is a work computer I do not want to install iTunes which does include a driver. I have a workaround that I will post as an answer for reference.

  Read the article

• How to enable Sqlite on a Mac OS X Mavericks [migrated]

  - by sehummel

  I upgraded my Mac with OS X Mavericks last week. It appears to have taken away support for Sqlite -- not Sqlite3, but sqlite. I need that for a website I work on. I went to Sqlite's website, but all I could find was older versions of Sqlite3. Where can I find a version of Sqlite? I've been through the php.ini and can only find one reference to sqlite. In short, how do I get Sqlite support on my Mac? I have Sqlite3 enabled and the issue isn't going away. I uncommented pdo_sqlite in the php.ini and I still have the issue.

  Read the article

• Outlook Registry Key Damaged; Tried "Fix It" and lost everything

  - by Ray

  My outlook 2007 (on Windows 7 64 bit) worked fine for two weeks. I then installed a printer/scanner/copier and the Outlook Window wouldn't open. I went to Microsoft's website and found a page that said my registry key was damaged. The page had a link to a Fix It program. I ran the program and it looks like all my Outlook data was wiped out. Can I get the data back? For future reference, how should I protect myself if the key goes bad again? Do you think I should unistall Outlook and re-install?

  Read the article

• DNS forwarders limitations

  - by thejartender

  My question is very simple (maybe a tad too simple), but I will try and phrase it in a way to hopefully assist future visitors. I have just set up (successfully I hope) a DNS server at with some name server records on Ubuntu 12.10 while I am waiting for it to propagate I would like to know for future reference if I can use more than 2 forwarders in my /etc/named.conf.options.Would this speed up propagation? Do make this question and answer more valuable what other public DNS servers are available over and above Google's public DNS adresses: 8.8.8.8 8.8.4.4 I would also like to know if a restart of bind means that my servers will need to re-propagate? Is there a methodology to update settings while bind is running?

  Read the article

• Vlookup using wildcards in indexed column

  - by Dm3k1

  I know how to use a wildcard with Vlookup on the reference value, but what about on the matched column index? I know you can do for instance VLOOKUP("*Hello*",A4:G4,2,FALSE) However, what if you wanted to match a cell that is "Hello", with another one that is "Why, Hello there!" (so the opposite i suppose) My data is set in a way where a macro is going to ask if A4 in workbook 1 matches C2:C25000 in workbook 2 to return the corresponding value in D back to workbook 1. The thought is that when A4 in workbook 1 says Its DHS Here, that I could input a value such as DHS in column C in workbook 2 and have it say its a match. Is this possible?

  Read the article

• Can I set a hyperlink's display text from a document property?

  - by themel

  I'm trying to make a word document customizable through a document property that contains the base URL of all the links. I've managed to make the links themselves reference the document property like this: { HYPERLINK { QUOTE "http://{ DOCPROPERTY Host}/some/path" } } Changing the document property and updating the files makes the hyperlinks point to the correct URL. However, visually, nothing changes - the old URL is still shown as the display text of the hyperlink. Is there a way to make this work? Microsoft docs helpfully state You can edit the display text for the field by typing over it. but I can't figure out how that is supposed to work - even if I manually type over the hyperlink, it includes the edits in the field code instead of adjusting the display text. Currently attempting in Word 2002, but 2010 also available.

  Read the article

• using Team foundation server

  - by joe

  I am using Team foundation server / visual studio as a client, to manage my visual foxpro source code. everytime i "checkout for edit" all my folders and files are read only and when i open my projects, it is like if the project is opened for the first time, asking me if i would like to set the current path as the default path... this is causing other serious problems as bad reference to "missing library files", which are actually not missing. i know Visual foxpro is old stuff...i hope someone who went through the same errors could help me out. thanks a lot guys

  Read the article

• Is there a general method to determine if a laptop can support 2x external monitors?

  - by Nick Alexeev

  Question: Is there a general method, which would let me determine if a laptop can support 2x external monitors? Context: I’m shopping for a laptop, which would support my 2 main modes of operation. In CAD mode, I sit at my desk and do many hours of work with OrCAD, Altium, SoligWorks. I’d like to have 2x external monitors. (If needed, monitors can be connected through dock station.) In field mode, I still need to run CAD packages, but only to look-up and tweak things occasionally. Field mode happens in vanilla indoor environments, so ruggedness and ingress protection are not needed. It would be nice if the laptop had a small footprint, like a 13” laptop perhaps. At the same time, weight and thickness of the laptop are not a problem for me. Of course, I also wonder if this is realistic at all. Any suggestion, insight or reference is really appreciated!

  Read the article

• local .pac-file URL format that works with IE and Safari (Windows)?

  - by legr3c

  Say I want to use a proxy auto-config file that is stored at C:\proxy.pac. To make Internet Explorer use this configuration I have to specify the pac-file in the LAN settings in the following way: file://C:/proxy.pac But Safari, that uses the same proxy settings, will ignore it in this case. To make Safari use the pac-file I have to reference it as file:///C:/proxy.pac (3 slashes at the beginning) which, according to Wikipedia is the correct format. But this way Internet Explorer will ignore it. Opera and Chrome, that also use the same proxy settings, are fine with both ways but is there another option that will work with Safari and Internet Explorer at the same time?

  Read the article

• Formatting a 5.25" floppy disk

  - by Spütnik

  So after the massive trouble of finding a 5.25" floppy drive and a connecting it up, then changing the BIOS so it's set as my A: drive, I tried to format a couple of high-density 1.2MB floppy disks using the "format A:" command in Command Prompt. Both times it formatted only 160KB and left it at that. If I then check the amount of space on those disks, it then comes up as 160KB. Why is this the case? How can I get my the full value out of my 1.2MB? For reference, I have a Mitsubishi MF504C-318UG, which should support 1.2MB disks.

  Read the article

• Custom Transport Agent: How do I collect NDRs and all other undeliverables in Exchange 2010 from the Postmaster?

  - by makerofthings7

  I'm trying to collect all NDRs in a single mailbox for all invalid recipients, and anything that fails for any reason. I have a custom transport agent, that I've written myself that appears here: [PS] C:\Windows\system32>Get-TransportAgent Identity Enabled Priority -------- ------- -------- Transport Rule Agent True 1 Text Messaging Routing Agent True 2 Text Messaging Delivery Agent True 3 Routing Rule Agent True 4 **** Sometimes when I run get-messagetrackinglog I get failures like this below RunspaceId : 4ecc61fb-13b9-4506-b680-577222c9bf21 Timestamp : 10/14/2013 12:42:42 PM ClientIp : ClientHostname : Exchange1 ServerIp : ServerHostname : SourceContext : Routing Rule Agent ConnectorId : Source : AGENT EventId : FAIL InternalMessageId : 4416 MessageId : <[email protected]> Recipients : {[email protected]} RecipientStatus : {} TotalBytes : 4542 RecipientCount : 1 RelatedRecipientAddress : Reference : MessageSubject : review CGRC due diligence. Sender : [email protected] ReturnPath : [email protected] MessageInfo : MessageLatency : MessageLatencyType : None EventData : How can I collect the NDRs in a single mailbox for review? I have already set the following command but it is of no effect [PS] C:\>set-TransportConfig -JournalingReportNdrTo [email protected] -ExternalPostmasterAddress [email protected]

  Read the article

• Unable to use autossh in background even with absolute path

  - by Zagorax

  I would love to set autossh to run at boot adding it to /etc/rc.local. This command works: autossh -i /root/.ssh/id_rsa -R 2522:localhost:22 user@address But, if I add the -f option autossh -f -i /root/.ssh/id_rsa -R 2522:localhost:22 user@address The ssh session is not started. As you can see, I'm using an absolute path for my identity file, so this seems to be a different problem from the one stated here: autossh in background does not work From /var/log/syslog: Oct 18 11:08:39 raspberrypi autossh[2417]: starting ssh (count 1) Oct 18 11:08:39 raspberrypi autossh[2417]: ssh child pid is 2418 Oct 18 11:08:39 raspberrypi autossh[2417]: ssh exited with status 0; autossh exiting I'm using it with debian wheezy on a raspberry pi, autossh version 1.4c. Could it be that it's passing the -f option to ssh instead?

  Read the article

• Installing sharepoint web service disabled when trying to install BizTalk adapter

  - by noesgard

  I have a MOSS Box, with Microsoft Office SharePoint Server 2007 SP2 (Danish server), .net 3.5 SP1 on a Server 2008 64 bit (where IIS is running 64 bit too). When I fire up the BizTalk installer and wants to select the SharePoint Web Service, this option is disabled/grayed out. Any ideas as how I can enable the option again? (It states that there are one or more prerequisites missing but I can't figure out which). I found some reference stating that I basically had to "toast" the MOSS box and install WSS 3, but that is NOT an option... Any suggestions? :o)

  Read the article

• How to change color of a cell in one sheet if its value increases or decreases from another cell value in a different sheet

  - by Sean Coffey

  I am putting together a workbook with 52 sheets for the weeks in the year. In this workbook there are multiple columns for percentages on each sheet. I want to be able to change the color of each cell based on whethernit increases (green) or decreases (red) from the same cell in the previous sheet. I have the formula i.e. =IF(ISERROR(B4/D4),"0", B4/D4) to calculate my percentages but I don't know how to put the reference in for this change. Any help?

  Read the article

• Looking for Primos "name generation" code

  - by Greg E

  Anyone remember Primos ? It had a shell-level thing called "name generation" which was very useful. Eg. to rename a bunch of files from part1.suffix to part1.new.suffix2 you could say rename *.suffix =.+new.suffix2 That's a very simple example, it was quite powerful. The control characters were: =,==,^=,^==,+ Which meant approximately: match 1 filename component, match all remaining components, delete one component, delete all remaining, add a component. In conjunction with Primos wildcards you could do pretty much any useful file renaming/copying operation very conveniently. It was much better than Unix wildcards and name generation/iteration and I'd like to find it again and use it. Anyone seen it around ? Not much reference on the interweb: search "Primos name generation" and you get a few fragmentary hits. Thanks !

  Read the article

• Using command line to connect to a wireless network with an http login

  - by Shane

  I'm trying to connect to a wifi network where it hijacks all requests and redirects you to a page where you have to agree to a terms of use before it lets you connect to the actual outside world. This is a pretty common practice, and usually doesn't pose much of a problem. However, I've got a computer running Ubuntu 9.10 server with no windowing system. How can I use the command line to agree to the terms of use? I don't have internet access on the computer to download packages via apt-get or anything like that. Sure, I can think of any number of workarounds, but I suspect there's an easy way to use wget or curl or something. Basically, I need a command line solution for sending an HTTP POST request essentially clicking on a button. For future reference, it'd be helpful to know how to send a POST request with, say, a username and password if I ever find myself in that situation in another hotel or airport.

  Read the article

• Managing MS Exchange server-side email rules on Mac OS X?

  - by Doug Harris

  Has anybody found an easy way to manage server-side rules from Mac OS X? Here's a brief list of what I know doesn't work: Entourage 2008 - it supports client rules, but not server rules. No good, there are certain actions that should happen before I open my laptop or check my email on my iPhone. Apple Mail - same as Entourage, but at least I don't get as frustrated since, unlike Entourage, this isn't a Microsoft product. Web mail (aka Outlook Web Access) - perhaps you can manage rule in the fancy version which Exchange serves to IE, but not with the browsers available on a Mac. I manage this now by launching a VMWare virtual machine running Windows XP and Outlook. I don't count that as an easy way. Update, post release of Office 2011 Does MS Outlook 2011 have the ability to manage server-side rules? Update, post installation of Office 2011 No. Outlook 2011 doesn't have this ability. I've already removed my account from Outlook and switched back to Apple Mail and iCal

  Read the article

• Why are some web clients requesting a page named "cache"?

  - by Toto

  We see errors like this in the apache error log: [Thu May 17 14:32:35 2012] [error] [client 192.168.1.1] File does not exist: /home/www-data/mywebsite.com/r/cache, referer: http://www.mywebsite.com/r/1010 It is strange because: There is no reference in the code/url about a folder/file "cache". The folder/file "cache" does not exist The client is randomly trying to access a "cache" folder everywhere on the website. It is always trying to access the folder/file "cache" following this pattern: Pattern: /level1/.../levelwhatever/filename (referer) /level1/.../levelwhatever/cache We run a LAMP (Debian stable: PHP 5.3.3-7+squeeze9. We also use APC 3.1.3p1). We use Google Analytics and AdSense. We do not know how to reproduce the problem. Note: I replaced the user's IP in the code for privacy.

  Read the article

• Make symlink on Windows of whole tree without modifying the original folder

  - by DarkGhostHunter

  I'm trying to do this: make a symlink of a whole directory "C:/Master", in different folders like "C:\Projects\Alpha\", "C:\Projects\Beta\" an so on. "Master" directory usually changes in files and data. I work on the "Projects/*", where every project folder uses the "Master" files, but every one has new files in them. Let's say, I point to the car engine in every project folder, and inside them I add different kind of wheels. The problem I'm having, as a Windows 8 user, is that symlinks (junction) acts as a window to "Master" - I'm not allowed to add any file inside. I looking a way to reference the entire "Master" directory, and add new files - not edit any of the "Master" ones. It's as described here, but on Windows.

  Read the article

• How to suppress the unsolicited footer when converting HTML -> PDF with Acrobat?

  - by gojira

  I often convert & combine (via contextmenu) HTML pages to PDF using Acrobat (not Acrobat Reader). I use Adobe Acrobat Pro 9 Extended, version 9.1.2. The converted PDFs always have the full path of the original file on the bottom of the PDF-page, also they have an additional header line with the document. I need to suppress that. I do not want the unsolicited header and footer in the resulting PDF files as they are a pain to reomve manually, with a certain page count per document it becomes impossible. Is it possible to suppres that and if, how?

  Read the article

• COUNTIFS over multiple worksheets

  - by Alison

  I am trying to make COUNTIFS go across two worksheets in the same excel file (Final Driver Forecast Model), just on different tabs. I need it to count if a driver returns between a certain time, then to put a 1 in that time slot. For example if a driver returns at 2:30 p.m. on the 27th, then the formula will put in a 1 in the July 27th slot from 2:00 p.m.-4:00 p.m. I have tried two different formulas the first is =COUNTIF3D(Bid Sheet '[1]Bid Sheet 1'!O4:O110,">="&B76,O4:O110,"<="&C76) This is looking at the worksheet called Bid Sheet 1 and the column O4 through O110 and deciding if the time fits in the time slot of B76 00:00 (12 a.m.) and C 76 2:00 a.m. The second formula I tried to do the exact same thing =COUNTIF3D(O4:O110,">="B76,O4:O110,"<="&C76,"FinalDriverForecastModel',Bid Sheet 1") Neither is working and they both give me #NAME? when I hit enter......What am I doing wrong?

  Read the article

< Previous Page | 383 384 385 386 387 388 389 390 391 392 393 394  | Next Page >