Search Results

Search found 12726 results on 510 pages for 'compatibility mode'.

Page 390/510 | < Previous Page | 386 387 388 389 390 391 392 393 394 395 396 397  | Next Page >

• X11 performance problem after upgrading from Centos3 to Centos5 with an ATI Rage XL

  - by Marcelo Santos

  After upgrading a computer from Centos3 to Centos5 an application that does a lot of scrolling took a very high performance hit. top tells me that X is using a lot of CPU and that was not happening before. The machine has an ATI Rage XL with 8MB and X is using the ati driver as there is no proprietary ATI driver for this board on linux. The xorg.conf: Section "Device" Identifier "Videocard0" Driver "ati" EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 Modes "1024x768" "800x600" "640x480" EndSubSection EndSection Section "DRI" Group 0 Mode 0666 EndSection A similar machine that still has Centos3 installed is able to start DRI on the X server while this one is not, this is the Xorg.0.log for the Centos5 machine: drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed [drm] failed to load kernel module "mach64" (II) ATI(0): [drm] drmOpen failed (EE) ATI(0): [dri] DRIScreenInit Failed (II) ATI(0): Largest offscreen areas (with overlaps): (II) ATI(0): 1024 x 1279 rectangle at 0,768 (II) ATI(0): 768 x 1280 rectangle at 0,768 (II) ATI(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles Indirect CPU to Screen color expansion Solid Lines Offscreen Pixmaps Setting up tile and stipple cache: 32 128x128 slots 10 256x256 slots (==) ATI(0): Backing store disabled (==) ATI(0): Silken mouse enabled (II) ATI(0): Direct rendering disabled (==) RandR enabled I also tried using EXA instead of XAA and setting: Option "AccelMethod" "XAA" Option "XAANoOffscreenPixmaps" "true" uname -a Linux sir5.erg.inpe.br 2.6.18-128.7.1.el5 #1 SMP Mon Aug 24 08:20:55 EDT 2009 i686 i686 i386 GNU/Linux rpm -qa | grep xorg-x11-server xorg-x11-server-utils-7.1-4.fc6 xorg-x11-server-sdk-1.1.1-48.52.el5 xorg-x11-server-Xvfb-1.1.1-48.52.el5 xorg-x11-server-Xnest-1.1.1-48.52.el5 xorg-x11-server-Xorg-1.1.1-48.52.el5 The drmOpenDevice error continues when using the suggested Option "AIGLX" "true".

  Read the article

• Proliant RAID 1 Rebuild Questions

  - by Nicholas

  I have a HP Proliant ML350 G5 server that experienced a power supply failure overnight. The power supply was replaced but unfortunately it got restarted with only 1 disk in the RAID 1 set plugged in. (The raid controller is the build in E200i). The raid BIOS then said on start-up that it had entered Interim Recovery Mode. However I would have expected it to still start up with only the 1 drive. The bios however says that it cannot find a C: drive and enters a reboot loop polling the other boot devices. First question is, is this normal behaviour not to start up on 1 disk? The second drive was then plugged in (all drives are ok) and the raid bios started an automatic rebuild on that disk. This appears to be a background process as there is no progress shown. However based on the light flashing it looks like it is working. My second question is how long will this rebuild take? (36GB 15K SAS drive). I cannot see any error messages and it looks like it is rebuilding the drive ok, but the computer still will not start-up. It still says during the boot up process that the C: drive is not found. If I wait for the rebuild to finish, is it likely to fix itself and find the C: drive? Or is there some other problem here?

  Read the article

• PHP on Server 2003: Enabling PHP_APC.DLL creates Error

  - by james.527.

  When trying to enable PHP_APC.DLL, PHP crashes returning invalid access to memory location. Any ideas? I am running 5.2.12 in ISAPI mode. Here is what I have enabled extension wise: ;extension=php_bz2.dll ;extension=php_curl.dll ;extension=php_dba.dll ;extension=php_dbase.dll ;extension=php_exif.dll ;extension=php_fdf.dll extension=php_gd2.dll ;extension=php_gettext.dll ;extension=php_gmp.dll ;extension=php_ifx.dll ;extension=php_imap.dll ;extension=php_interbase.dll extension=php_ldap.dll ;extension=php_mbstring.dll extension=php_mcrypt.dll ;extension=php_mhash.dll ;extension=php_mime_magic.dll ;extension=php_ming.dll ;extension=php_msql.dll ;extension=php_mssql.dll extension=php_mysql.dll extension=php_mysqli.dll ;extension=php_oci8.dll ;extension=php_openssl.dll extension=php_pdo.dll ;extension=php_pdo_firebird.dll ;extension=php_pdo_mssql.dll extension=php_pdo_mysql.dll ;extension=php_pdo_oci.dll ;extension=php_pdo_oci8.dll ;extension=php_pdo_odbc.dll ;extension=php_pdo_pgsql.dll extension=php_pdo_sqlite.dll ;extension=php_pgsql.dll ;extension=php_pspell.dll ;extension=php_shmop.dll ;extension=php_snmp.dll ;extension=php_soap.dll ;extension=php_sockets.dll extension=php_sqlite.dll ;extension=php_sybase_ct.dll ;extension=php_tidy.dll ;extension=php_xmlrpc.dll ;extension=php_xsl.dll extension=php_zip.dll extension=php_win32service.dll ultimately i'm trying to create a PHP based uploader with a progress bar. From what I understand PHP_APC is the only way to do this. If anyone could help me stabilize PHP_APC or know of another UL with progress bar method, it would be appreciated.

  Read the article

• Apache error with suEXEC only

  - by michaelc

  When I enable suEXEC by following the tutorial here, I am able to get PHP to run over Apache in cgi mode, but when I start trying to use suEXEC I get a 403, and the following error appears in the error log "client denied by server configuration". The suEXEC log is empty. How can I get this working? My ultimate goal is to run fastcgi with suexec, and this error has stopped me at every turn. The relevant portion of httpd.conf: ScriptAlias /php5-cgi /usr/bin/php-cgi Action php5-cgi /php5-cgi AddHandler php5-cgi .php <Directory /usr/bin> Order allow,deny Allow from all </Directory> <VirtualHost *:80> ServerName skylords.com ServerAlias www.skylords.com en.skylords.com lt.skylords.com nl.skylords.com DocumentRoot /srv/http/htdocs SuexecUserGroup skylords skylords AddHandler php5-cgi .php ScriptAlias /php5-cgi /var/http/htdocs/cgi-bin/php-cgi ErrorDocument 404 /srv/http/htdocs ErrorLog /srv/http/logs/apache_error.log <Directory "/srv/http/htdocs"> AllowOverride All Order allow,deny Allow from all Options Indexes +FollowSymLinks +ExecCGI </Directory> </VirtualHost>

  Read the article

• OpenVPN and TomatoVPN

  - by Bill Johnson

  Wondering if someone can help me with the following. I have updated my Linksys router with TomatoVPN and used the following config: Interface Type:TAP Protocol:UDP Port:1195 Firewall Custom Authorization Mode:Static Key I have then inserted the static key generated in OpenVPN saved and started the service. connect.ovpn. # Use the following to have your client computer send all traffic through your router # (remote gateway) remote (entered my DNS/DHCP servers external IP address here) port 1195 dev tap secret static.key.txt proto udp comp-lzo route-gateway 192.168.1.1 redirect-gateway float I've then placed my static key in a file in the same directory as your connect.ovpn (static.key.txt) Now OpenVPN is installed on a laptop that I use at home. I have plugged in the laptop to my home connection and started connect.ovpn The Local Area Connection is connected as 'Home Network 3' - and when I start OpenVPN it is connected as 'Local Area Connection 2' and this is showing as 'Unidentified Network' and it appears there is no network access. TAP-Win32 Adapter V9 appears to be the adaptors name and the IP and DNS properties are set to automatic. If I open up the OpenVPN GUI it shows an error message saying "Connecting to connect has failed". Looking at the error message behind this pop-up one line says "TCP/UDP Socket bind failed on local address [undef]:1195 Address already in use [WSAEADDRINUSE] Could anyone possibly help me further with this please?

  Read the article

• Unable to connect Xend with virt-manager

  - by Majid Azimi

  I have installed debian 6.0.1a. I have install all XEN stuff. including xen kernel, libvirtd, ... but when i want to connect xend, virt-manager shows me this: Verify that: A Xen host kernel was booted The Xen service has been started details: Unable to open connection to hypervisor URI 'xen:///': unable to connect to '/var/run/libvirt/libvirt-sock', libvirtd may need to be started: Permission denied Traceback (most recent call last): File "/usr/share/virt-manager/virtManager/connection.py", line 971, in _try_open None], flags) File "/usr/lib/python2.6/dist-packages/libvirt.py", line 111, in openAuth if ret is None:raise libvirtError('virConnectOpenAuth() failed') libvirtError: unable to connect to '/var/run/libvirt/libvirt-sock', libvirtd may need to be started: Permission denied here is uname output: Linux debian 2.6.32-5-xen-amd64 #1 SMP Tue Mar 8 00:01:30 UTC 2011 x86_64 GNU/Linux and also xend and libvirtd is runnig: root@debian:/home/mazimi# /etc/init.d/libvirt-bin status Checking status of libvirt management daemon: libvirtd running. root@debian:/home/mazimi# /etc/init.d/xend start Starting Xen daemons: xenstored xenconsoled xend. permissions for livbirt-sock: root@debian:/home/mazimi# ls -alih /var/run/libvirt/ total 12K 671017 drwxr-xr-x 3 root root 4.0K Apr 15 13:54 . 654083 drwxr-xr-x 18 root root 4.0K Apr 15 13:54 .. 670901 srwxrwx--- 1 root libvirt 0 Apr 15 13:54 libvirt-sock 670928 srwxrwxrwx 1 root libvirt 0 Apr 15 13:54 libvirt-sock-ro 670870 drwxr-xr-x 2 root root 4.0K Apr 15 02:34 qemu and also we have group named libvirt in /etc/group When running libvirtd with verbose mode it behaves kind of stange: root@debian:/var/log/libvirt# /usr/sbin/libvirtd --verbose 17:26:55.841: warning : qemudStartup:1832 : Unable to create cgroup for driver: No such device or address 17:26:56.128: warning : lxcStartup:1900 : Unable to create cgroup for driver: No such device or address and waits infinitely.

  Read the article

• OpenAM throwing 302 0 behind haproxy, nginx

  - by Travis

  I'm having some issues with my deployment and was wondering if you can help. My set up is as follows: 2 OpenAM servers are set up behind a load balancer (HAproxy). The load balancer is set up behind two reverse proxies (nginx). The two reverse proxies are ser up behind another load balancer (haproxy). So a request will go through Haproxy nginx Haproxy openam I can access the OpenAM web console through the reverse proxies without a problem. Everything works fine at this level. However when I access openam through the load balancer in front of the reverse proxies Openam throws a 302 error. The funny thing is however I can access the host/openam/UI/Login and login successfully. I even get the cookie and have access to my apps that are set up. However immediately after the login OpenAM throws a 302 redirect. I'm puzzled and cannot figure out what is going wrong. Does anyone have any idea? My config files are below: nginx config : server { listen 443; server_name oamlb1; location / { proxy_pass http://oamlb1.mydomain.com:8080; proxy_set_header X-Real-IP $remote_addr; } location /openam { proxy_pass http://oamlb1.mydomain.com:8080; proxy_set_header X-Real-IP $remote_addr; proxy_set_header Host oamlb1.mydomain.com:8080; } } haproxy config : (This file is for the servers. The file for the reverse proxies is idenical except it points to the reverse proxies) listen http_proxy :8090 mode http balance roundrobin option httpclose option forwardfor server webA oamserver1.mydomain.com:18080 option forwardfor Thanks

  Read the article

• Debian and Multipath IO problem

  - by tearman

  Basically the situation is, I have a box running Debian, the box internally has an Intel SCSI RAID controller which is controlling 2 hard drives in RAID1 mode which is where the OS is installed. Further, I have a QLogic fiber channel adapter that connects the unit to a Fiber Channel SAN. My process of installation is I'll install Debian to the local drives, and leave the QLogic firmware out of it for the time being. Then once I get the unit online, I'll install the firmware drivers. This flops my internal drives from /dev/sda to /dev/sdc, which is a bit annoying, but recoverable. Probably should address these by UUID anyways. Once I get back online, I have to install multipath-tools (the framework is a multipath framework). However, once I reboot the machine again, it fails on boot after discovering multipath targets, saying my local drives are busy and cannot be mounted to /root. Any help in what may be the problem here? Or at least how to disable multipath until after the unit boots and then ignores the internal drives?

  Read the article

• Remote Desktop to Server 2008R2 fails from one particular Win7 client

  - by Jesse McGrew

  I have a VPS running Windows Web Server 2008 R2. I'm able to connect using Remote Desktop from my home PC (Windows 7), personal laptop (Windows 7), and work laptop (Windows XP). However, I cannot connect from my work PC (Windows 7). I receive the error "The logon attempt failed" in the RDP client, and the server event log shows "An account failed to log on" with this explanation: Subject: Security ID: NULL SID Account Name: - Account Domain: - Logon ID: 0x0 Logon Type: 3 Account For Which Logon Failed: Security ID: NULL SID Account Name: username Account Domain: hostname Failure Information: Failure Reason: Unknown user name or bad password. Status: 0xc000006d Sub Status: 0xc0000064 Process Information: Caller Process ID: 0x0 Caller Process Name: - Network Information: Workstation Name: JESSE-PC Source Network Address: - Source Port: - Detailed Authentication Information: Logon Process: NtLmSsp Authentication Package: NTLM Transited Services: - Package Name (NTLM only): - Key Length: 0 I can connect from the offending work PC if I start up Windows XP Mode and use the RDP client inside that. The server is part of a domain but my account is local, so I'm logging in using a username of the form hostname\username. None of the clients are part of a domain. The server uses a self-signed certificate, and connecting from home I get a warning about that, but connecting from work I just get the logon error.

  Read the article

• mysql.proc has gone corrupt. How can I fix it?

  - by Metalcoder

  I have a server running Debian 5.0, and MySQL. Suddendly, MySQL stopped working, and after many attempts to fix it, I decided to reinstall it. I installed MySQL 5.1.63, and when started it goes to safe mode. I made some typing, and when I executed mysql_upgrade as root, it complained: ... Running 'mysql_fix_privilege_tables'... ERROR 1548 (HY000) at line 1111: Cannot load from mysql.proc. The table is probably corrupted ERROR 1064 (42000) at line 1112: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'sqlstate 'HY000' set message_text='Unexpected content found in the performance_s' at line 1 ERROR 1548 (HY000) at line 1125: Cannot load from mysql.proc. The table is probably corrupted FATAL ERROR: Upgrade failed I checked the mysql.proc table, and it's comment column was slightly different from my backup. -- My backup says: `comment` char(64) CHARACTER SET utf8 COLLATE utf8_bin NOT NULL DEFAULT '', -- But it were: `comment` text CHARACTER SET utf8 COLLATE utf8_bin NOT NULL, So, I restored my mysql database backup, and now they all match, but mysql_upgrade still trigger the same errors. I also tried do check and repair the mysql.proc table, but got no success.

  Read the article

• Win7 Pro x64 task manager hangs when restarting explorer.exe after waking from sleep

  - by Brandon Dybala

  I have a desktop running Windows 7 x64 Pro, set for Hybrid Sleep on a wired network. Wakeup is only enabled from the keyboard (wake on mouse and Wake-On-LAN are both disabled). Sometimes when it wakes up, there is no network connectivity. The notification area icons for both network and volume don't respond to clicks. If I open the Network and Sharing Center, clicking the red X doesn't do anything. Restarting does fix the problem, but I'm looking for a solution that does not require restarting (if at all possible). Drivers are all up to date. I've tried opening Task Manager and restarting the explorer.exe process, but Task Manager freezes for a few minutes, the "New Task" dialog closes, and explorer.exe has not restarted. CPU and memory usage are both normal. One thread suggested making sure the BIOS was set for S3 sleep mode only (not S1 or S1 & S3), but I haven't checked this yet. Going back to sleep and waking back up does not help. So far only a reboot has fixed the issue. System specs: Windows 7 x64 Pro Asus P8Z68-V PRO/GEN3 128 GB Crucial m4 SSD (Firmware version 0309) Intel Core i7 2600 3.4 GHz 16 GB RAM Any ideas? Brandon

  Read the article

• How to do 'search for keyword in files' in emacs in Windows without cygwin?

  - by Anthony Kong

  I want to search for keyword, says 'action', in a bunch of files in my Windows PC with Emacs. It is partly because I want to learn more advanced features of emacs. It is also because the Windows PC is locked down by company policy. I cannot install useful applications like cygwin at will. So I tried this command: M-x rgrep It throws the following error message: *- mode: grep; default-directory: "c:/Users/me/Desktop/Project" -*- Grep started at Wed Oct 16 18:37:43 find . -type d "(" -path "*/SCCS" -o -path "*/RCS" -o -path "*/CVS" -o -path "*/MCVS" -o -path "*/.svn" -o -path "*/.git" -o -path "*/.hg" -o -path "*/.bzr" -o -path "*/_MTN" -o -path "*/_darcs" -o -path "*/{arch}" ")" -prune -o "(" -name ".#*" -o -name "*.o" -o -name "*~" -o -name "*.bin" -o -name "*.bak" -o -name "*.obj" -o -name "*.map" -o -name "*.ico" -o -name "*.pif" -o -name "*.lnk" -o -name "*.a" -o -name "*.ln" -o -name "*.blg" -o -name "*.bbl" -o -name "*.dll" -o -name "*.drv" -o -name "*.vxd" -o -name "*.386" -o -name "*.elc" -o -name "*.lof" -o -name "*.glo" -o -name "*.idx" -o -name "*.lot" -o -name "*.fmt" -o -name "*.tfm" -o -name "*.class" -o -name "*.fas" -o -name "*.lib" -o -name "*.mem" -o -name "*.x86f" -o -name "*.sparcf" -o -name "*.dfsl" -o -name "*.pfsl" -o -name "*.d64fsl" -o -name "*.p64fsl" -o -name "*.lx64fsl" -o -name "*.lx32fsl" -o -name "*.dx64fsl" -o -name "*.dx32fsl" -o -name "*.fx64fsl" -o -name "*.fx32fsl" -o -name "*.sx64fsl" -o -name "*.sx32fsl" -o -name "*.wx64fsl" -o -name "*.wx32fsl" -o -name "*.fasl" -o -name "*.ufsl" -o -name "*.fsl" -o -name "*.dxl" -o -name "*.lo" -o -name "*.la" -o -name "*.gmo" -o -name "*.mo" -o -name "*.toc" -o -name "*.aux" -o -name "*.cp" -o -name "*.fn" -o -name "*.ky" -o -name "*.pg" -o -name "*.tp" -o -name "*.vr" -o -name "*.cps" -o -name "*.fns" -o -name "*.kys" -o -name "*.pgs" -o -name "*.tps" -o -name "*.vrs" -o -name "*.pyc" -o -name "*.pyo" ")" -prune -o -type f "(" -iname "*.sh" ")" -exec grep -i -n "action" {} NUL ";" FIND: Parameter format not correct Grep exited abnormally with code 2 at Wed Oct 16 18:37:44 I believe rgrep tried to spwan a process and called 'FIND' with all the parameters. However, since it is a Windows, the default Find executable simply does not know how to handle. What is the better way to search for a keyword in multiple files in Emacs on Windows platform, without any dependency on external programs? Emacs version: 24.2.1

  Read the article

• kvm works only when kvm-intel is unloaded

  - by Sathya

  I am new to kvm. I have this strange issue. But before explaining the issue, here is my set up. I try to install VM on my Host which is a Acer Laptop 5720 Has T7500 Intel processor. The cpu flags indicate that Virtualization is supported. I run Ubuntu 10.04 (lucid) on it. It comes with kvm. Now coming to the issue - I dont get any errors while executing "sudo modprobe kvm-intel". So I presume my processor does indeed support hardware virtualization. I use virt-manager and create a VM on which I install ubuntu from an *.iso file. When I start the VM it says it is running. No signs of any trouble. I can see the domain list in "virsh list". But when I try to connect to the VM thru VNC, all I get to see is a blank screen (no cursor). There is no response to any key press. I changed the video mode etc. Tried all different combinations but none work. But strangely, if I shutdown the vm an virt-manager and then unload the module by doing "sudo modprove -r kvm-intel", everything works fine. ie., I can see the screen via VNC. I am able to install the OS and so on. So what does this mean ? IS hardware virtualization not supported ? How come there is no error anywhere ? dmesg | grep kvm doesnt report anything. Can someone throw light on what excatly is happening ?

  Read the article

• IPMI not fucntioning with Network Bonding

  - by muhammed sameer

  Hey, I am having problems with running IPMI on my servers that have network bonding enabled. Platform: CentOS release 5.3 (Final) Kernel: 2.6.18-92.el5 64bit Dell PowerEdge 1950 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet I have bonded the interface eth0 and eth1 as active passive, with eth0 as the active interface, below is conf description from /proc Bonding Mode: fault-tolerance (active-backup) Primary Slave: eth0 Currently Active Slave: eth0 MII Status: up MII Polling Interval (ms): 30 Up Delay (ms): 0 Down Delay (ms): 0 Slave Interface: eth0 MII Status: up Link Failure Count: 0 Permanent HW addr: 00:22:19:56:b9:cd Slave Interface: eth1 MII Status: up Link Failure Count: 0 Permanent HW addr: 00:22:19:56:b9:cf My IPMI device is as follows IPMI Device Information Interface Type: KCS (Keyboard Control Style) Specification Version: 2.0 I2C Slave Address: 0x10 NV Storage Device: Not Present Base Address: 0x0000000000000CA8 (I/O) Register Spacing: 32-bit Boundaries I Have used openIPMI as well as freeipmi both to control the chassis via the IPMI card, but on servers which have bonding enabled, the command times out, below is the full run of the command with debug info. ipmi_lan_send_cmd:opened=[0], open=[4482848] IPMI LAN host 70.87.28.115 port 623 Sending IPMI/RMCP presence ping packet ipmi_lan_send_cmd:opened=[1], open=[4482848] No response from remote controller Get Auth Capabilities command failed ipmi_lan_send_cmd:opened=[1], open=[4482848] No response from remote controller Get Auth Capabilities command failed Error: Unable to establish LAN session Failed to open LAN interface Unable to get Chassis Power Status On the other hand I configured IPMI on a box with the same specs as mentioned above without bonding and IPMI works perfectly. Has anyone faced this problem with IPMI + Bonding ? I would be thankful is someone helps circumvent this issue. Muhammed Sameer

  Read the article

• Vboxheadless without a command prompt (VirtualBox)

  - by joe

  I'm trying to run VirtualBox VM's in the background from a service. I'm having trouble starting a process the way I desire. I'd like to start the virtualbox guest in headless mode as a separate process and show nothing as far as GUI. Here's what I've tried: From command line: start vboxheadless -s "Ubuntu Server" In C#: ProcessStartInfo info = new ProcessStartInfo { UseShellExecute = false, RedirectStandardOutput = true, ErrorDialog = false, WindowStyle = ProcessWindowStyle.Hidden, CreateNoWindow = true, FileName = "C:/program files/sun/virtualbox/vboxheadless", Arguments = "-s \"Ubuntu Server\"" }; Process p = new Process(); p.StartInfo = info; p.Start(); String output = p.StandardOutput.ReadToEnd(); //BLOCKS! (output stream isnt closed) I want to be able to get the output to know if starting the server was a success. However, it seems as though the window that's spawned never closes its output stream. It's also worth mentioning that I've tried using vboxmanage startvm "Ubuntu Server" --type=vrdp. I can determine whether the server started properly using this. But it shows a new command prompt window for the newly started VirtualBox guest.

  Read the article

• How can I make my PCI-E graphics card visible to Ubuntu when the motherboard has integrated graphics

  - by Norman Ramsey

  I have a Gigabyte GA-MA74GM-S2 motherboard with integrated graphics that shows up on lspci as an ATI Radeon 2100. I also bought a PCI-Express Nvidia graphics card so I could use the VDPAU feature on Linux (plays H.264 in hardware). The BIOS has three settings about which display to initialize first: Integrated graphics PCI graphics PCI-Express graphics (PEG) I set the BIOS on PEG, but I cannot get anything, not even a splash screen or POST messages, to emerge from the PCI-Express graphics card. (I'm using a DVI connector; the card also has an HDMI output.) I cannot get the kernel lspci to see the graphics card; the only VGA controller it acknowledges is the integrated one. Running dmidecode acknowledges the existence of an x16 PCI Express slot, and it says Current usage: Unknown There is an additional BIOS setting called "Internal Graphics Mode" which is normally set to "Auto" which means it is supposed to prefer a PCI Express VGA card. I set it to "Disabled" which now means I'm getting no output at all. I will soon be learning how to do a BIOS reset! Other information: The PCI-E card is a MSI N210-MD512H GeForce 210. This is a fanless card. Although there are no fans to see turning, the heat sink on the PCI-E card is definitely getting hot, so the card is getting some sort of power. It gets all its power from the PCI-E slot; there is no external power connector. The BIOS is an AMI Award BIOS. My question: how can I make the PCI Express graphics card visible to Ubuntu?

  Read the article

• HAProxy + NodeJS gets stuck on TCP Retransmission

  - by sled

  I have a HAProxy + NodeJS + Rails Setup, I use the NodeJS Server for file upload purposes. The problem I'm facing is that if I'm uploading through haproxy to nodejs and a "TCP (Fast) Retransmission" occurs because of a lost packet the TX rate on the client drops to zero for about 5-10 secs and gets flooded with TCP Retransmissions. This does not occur if I upload to NodeJS directly (TCP Retransmission happens too but it doesn't get stuck with dozens of retransmission attempts). My test setup is a simple HTML4 FORM (method POST) with a single file input field. The NodeJS Server only reads the incoming data and does nothing else. I've tested this on multiple machines, networks, browsers, always the same issue. Here's a TCP Traffic Dump from the client while uploading a file: ..... TCP 1506 [TCP segment of a reassembled PDU] >> everything is uploading fine until: TCP 1506 [TCP Fast Retransmission] [TCP segment of a reassembled PDU] TCP 66 [TCP Dup ACK 7392#1] 63265 > http [ACK] Seq=4844161 Ack=1 Win=524280 Len=0 TSval=657047088 TSecr=79373730 TCP 1506 [TCP Retransmission] [TCP segment of a reassembled PDU] >> the last message is repeated about 50 times for >>5-10 secs<< (TX drops to 0 on client, RX drops to 0 on server) TCP 1506 [TCP segment of a reassembled PDU] >> upload continues until the next TCP Fast Retransmission and the same thing happens again The haproxy.conf (haproxy v1.4.18 stable) is the following: global log 127.0.0.1 local1 debug maxconn 4096 # Total Max Connections. This is dependent on ulimit nbproc 2 defaults log global mode http option httplog option tcplog frontend http-in bind *:80 timeout client 6000 acl is_websocket path_beg /node/ use_backend node_backend if is_websocket default_backend app_backend # Rails Server (via nginx+passenger) backend app_backend option httpclose option forwardfor timeout server 30000 timeout connect 4000 server app1 127.0.0.1:3000 # node.js backend node_backend reqrep ^([^\ ]*)\ /node/(.*) \1\ /\2 option httpclose option forwardfor timeout queue 5000 timeout server 6000 timeout connect 5000 server node1 127.0.0.1:3200 weight 1 maxconn 4096 Thanks for reading! :) Simon

  Read the article

• Mediawiki extension error

  - by vinylguitar

  I'm running the latest version of mediawiki using MoWeS Portable II from my desktop. I just installed this extension on the wiki http://www.mediawiki.org/wiki/Extension:MsUpload It adds an option to upload files (to be embedded in an article) to the edit screen of an article. After installing it when I try and edit an article I get the following error: Fatal error: Call to undefined method OutputPage::addModules() in C:\Users\User\Desktop\knowledge mapedia 10 25 13 copy\mowes_portable\www\mediawiki\extensions\MsUpload\msupload.php on line 65 Also here is what I posted in the localsettings.php file (I put it in at the end of localsettings.php if it makes a difference): Start --------------------------------------- MsUpload $wgMSU_ShowAutoKat = false; #autocategorisation $wgMSU_CheckedAutoKat = false; #checkbox for autocategorisation checked $wgMSU_debug = false; #debug mode $wgMSU_ImgParams = '400px'; #default max-size for inserted image $wgMSU_UseDragDrop = true; #show drag&drop area require_once "$IP/extensions/MsUpload/msupload.php"; End --------------------------------------- MsUpload require_once "$IP/extensions/msupload/msupload.php"; At line 65 in the localsettings.php file there is the following: line 64 ## Database settings line 65 $wgDBtype = "mysql"; line 66 $wgDBserver = "localhost"; line 67 $wgDBname = "mediawiki"; line 68 $wgDBuser = "root"; line 69 $wgDBpassword = ""; Any idea what I'm doing wrong?

  Read the article

• How to diagnose disk errors when disk appears to be ok?

  - by Kylotan

  I have a six-month-old 1TB Seagate drive formatted into 2 NTFS partitions, and the disk appeared to be failing with Windows dropping down from UDMA to PIO mode, reporting Delayed Write Errors, and hanging Explorer when browsing directories. My initial suspicion was that the disk was dying. However, on further examination it appears that Ubuntu, which doesn't write to the volume frequently like Windows does, was able to read the disk properly and retrieve all the data intact, saving me from having to use an older backup. Finally, running the Seatools DOS diagnostic reported that the disk has no problems, ie. SMART errors and no bad sectors, apparently. This, in combination with the relative youth of the disk, suggests that something else is broken. The cable? The PSU? The integrated disk controller? But what would be a good way to diagnose the problem without risking damaging the data? I intend to extract the disk and try it in an external eSATA enclosure and see if the write errors cease, but in the event of the disk appearing to be fine, I would like to be able to confirm what part of the hardware is actually broken here in order to know just what needs replacing. Are there any good ways to go about this?

  Read the article

• How to diagnose disk errors when disk appears to be ok?

  - by Kylotan

  I have a six-month-old 1TB Seagate drive formatted into 2 NTFS partitions, and the disk appeared to be failing with Windows dropping down from UDMA to PIO mode, reporting Delayed Write Errors, and hanging Explorer when browsing directories. My initial suspicion was that the disk was dying. However, on further examination it appears that Ubuntu, which doesn't write to the volume frequently like Windows does, was able to read the disk properly and retrieve all the data intact, saving me from having to use an older backup. Finally, running the Seatools DOS diagnostic reported that the disk has no problems, ie. SMART errors and no bad sectors, apparently. This, in combination with the relative youth of the disk, suggests that something else is broken. The cable? The PSU? The integrated disk controller? But what would be a good way to diagnose the problem without risking damaging the data? I intend to extract the disk and try it in an external eSATA enclosure and see if the write errors cease, but in the event of the disk appearing to be fine, I would like to be able to confirm what part of the hardware is actually broken here in order to know just what needs replacing. Are there any good ways to go about this?

  Read the article

• Windows 8 unable to connect to WPA2 AES Wireless Network

  - by user170193

  I'm running Windows 8 and am unable to connect to my home wireless network. I've tried restarting the router, patching the drivers to the next version, patching the drivers to the last version, running windows update and patching the chipset drivers to the latest version. So far nothing has worked. My computer can get on the internet via USB tethering on my phone or an open WiFi connection, but it is unable to connect to my home WPA2 AES secured wireless network. It sees the network, attempts to connect, gets a limited connection and then drops the connection. All the other wireless devices in my household have no problems. I have the new Dell XPS 12, running Windows 8 using an Intel Centrino Advanced-N 6235 wireless adapter. I've refreshed windows twice now to try different driver configurations. I've tried uninstalling all the Dell software, I've tried uninstalling all the Intel software and reinstalling just the drivers. I've tried turning switching the ability for the Wireless driver to turn the computer off or on. I've tried setting up the connection manually from desktop mode. I've tried switching it on and off using the wireless button on the keyboard and in the software. So far nothing has allowed me to connect to the secured network. It just keeps getting a limited connection, dropping the connection and retrying. It's driving me crazy, any ideas, anything I missed? Thanks.

  Read the article

• How do I force Windows 7 to recognize my Projector?

  - by user63564

  I have a new Dell XPS with an NVIDIA GeForce GT 445M and an old (several years) Epson PowerLite Cinema 550 projector. Windows 7 refuses to recognize that the projector is connected under normal conditions (I'll get to the strange condition in a moment). Here are some things that I have already tried: Confirm that the projector continues to work well on my old Windows XP laptop. Confirm that the video cable (HDMI to HDMI) is connected Make sure the Dell laptop is plugged in to wall power at all times Reboot both the computer and the projector Click "Detect" under the "Connect to an External Display" Windows dialog (no reaction) Click "Rigorous Display Detection" under NVIDIA Control Panel (dialog: none found) Checked "Force Television Detection on startup" under "My display is not shown..." in NVIDIA Control Panel (no effect) Here's where it gets weird... My projector has three states: off, standby and on. Standby means the power switch on the back is on, but the projector is effectively off (no picture, no access to menu or controls). When I plug in the HDMI cable while the projector is in standby, Windows detects the projector! It lets me switch to Duplicate, Extend, or Project Only mode, and adjusts the resolution appropriately. A new Generic Plug-n-Play monitor shows up in my device manager. A "Seiko EPSON PJ" display shows up in my NVIDIA control panel. Then if I turn my projector on, Windows no longer recognizes the display. This is true whether I turn the projector on while the HDMI cable is plugged in, or if I unplug the HDMI cable while turning on the projector. Anyone have any ideas, because I'm completely stumped...?

  Read the article

• signed applet automatically running as insecure

  - by Terje Dahl

  My application is deployed as a self-signed applet to several thousand users at more than 50 schools across the country (in Norway). The user is presented with the standard Java security warning asking if they will accept the signature. When they do, the applet runs perfectly. However, about half a year ago a group of 7 school, all under a common IT department, stopped getting the security warning. In stead the applet loads and starts running in untrusted mode, without first giving the user an option to accept or reject the signature. The problem is on Windows machines, and only when the machine is connected to the schools network. If they take the same machine home with them, the program functions as it should, with security warnings and everything. I know little about Window systems in general, but I would think it would be some sort of policy-file or something that is loaded when a machine hooks up to/through the schools network. Furthermore, the problem only started occurring in these 7 schools after changes made after a security breach they had a while back. The IT department is stumped. I am stumped. Any thoughts, comments, suggestions?

  Read the article

• HP ProCurve & Cisco switches interoperability

  - by Kamil Z

  I have a couple of questions regarding Cisco and HP ProCurve interoperability. Here's a link to pdf with my network topology. Can someone help me with basic VLAN configuration in such topology? Below there are some details of my configuration: # m_management_2 interface FastEthernet0/43 switchport access vlan 250 switchport mode access spanning-tree port-priority 32 spanning-tree cost 100 # MTA2-swmgmt1 vlan 1 name "DEFAULT_VLAN" untagged 1-48 ip address 10.10.249.190 255.255.255.128 exit # MTA2-swtr1 vlan 1 name "DEFAULT_VLAN" untagged 1-14,16-48 no ip address no untagged 15 exit vlan 100 name "MTA Mgmt" untagged 15 ip address 10.10.249.188 255.255.255.128 exit # MTA2-swtr2 vlan 1 name "DEFAULT_VLAN" untagged 1-14,16-48 no ip address no untagged 15 exit vlan 100 name "MTA Mgmt" untagged 15 ip address 10.10.249.189 255.255.255.128 exit I don't post MTA2-bcsw[12] configuration, because I wasn's successfull in this one yet. Every time I configure VLANs on MTA2-bcsw[12] Fa0/24 interface on m_management_2 goes down bacause of receiving tagged BPDUs on access port (there are no VLANs configured on MTA2-swmgmt1 because of fact that only 250 VLAN is allowed in this switch. Is it correct?). Can someone provide me some basic configuration for this topology? Second thing I want to ask is concept of connection from MTA2-swmgmt1 to MTA2-swtr[12] HP switches for the sake of management. How to configure such ports on HP switches (managed switch and manager switch). Is my actual configuration correct?

  Read the article

• Internal disk not correctly recognised by Windows 7

  - by david

  i'm having problems configuring a disk in a brand new, clean windows-7 install. here are some system specifics- . disk- western digital velociraptor wd6000hlhx . mobo- gigabyte z77x-ud3h . bios sata-mode set to ahci [not raid], w/disk connected to sata0 [6gb/s hi-speed sata]. . windows 7 enterprise sp1 x64 the disk is recognized by bios and correctly identified [name & size ok]. the disk is also recognized by windows on a h/w level, but it won't show up in the explorer. windows reports the device is working correctly. windows disk manager shows the drive, but says it's uninitialized and has no partitions [which is incorrect]. if i try to initialize the drive, windows throws an error saying that it "cannot find the file specified". [which file???] before connecting the drive to the new machine, i partitioned and formatted the disk under windows xp sp2, giving it 2 partitions [mbr, not gpt] and copying over a boatload of data. obviously none of this appears under windows 7. removing the disk from the new machine and replacing it back in the windows xp machine shows the disk and all data are intact and functional. i'd like to have windows 7 recognize the disk w/o having to lose the data and start over. is this possible? if so, how would i do that? I checked this post, but even though the problem seems identical, the information didn't help. any help appreciated. thanks!

  Read the article

< Previous Page | 386 387 388 389 390 391 392 393 394 395 396 397  | Next Page >