Search Results

Search found 21809 results on 873 pages for 'display interfaces'.

Page 393/873 | < Previous Page | 389 390 391 392 393 394 395 396 397 398 399 400  | Next Page >

  • Assign individual NIC to KVM guest

    - by Bin S
    I have a server with 6 NICs installed and is running Ubuntu 12.04LTS. I want to setup 4 guest VMs using kvm. Now I want to assign 2 NICs for the host(1 Public IP and 1 private IP), and 1 NIC each to 4 guest VM(all private IP). How do I do this? /etc/network/interfaces I am having trouble with my configuration file shown below: # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address 192.168.1.109 netmask 255.255.255.0 gateway 192.168.1.5 auto eth1 iface eth1 inet static address 192.168.1.117 netmask 255.255.255.0 auto eth2 iface eth2 inet manual auto br0 iface br0 inet static address 192.168.1.118 netmask 255.255.255.0 bridge_ports eth2 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp off auto eth3 iface eth3 inet manual auto br1 iface br1 inet static address 192.168.1.119 netmask 255.255.255.0 bridge_ports eth3 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp off auto eth4 iface eth4 inet manual auto br2 iface br2 inet static address 192.168.1.123 netmask 255.255.255.0 bridge_ports eth4 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp off auto eth5 iface eth5 inet manual auto br3 iface br3 inet static address 192.168.1.124 netmask 255.255.255.0 bridge_ports eth5 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp off

    Read the article

  • Is it possible to install Ubuntu 10.10 and/or Ubuntu 11.04 on a late 2009 iMac?

    - by Oliver
    I would like to install Ubuntu on my iMac 10,1 (21.5 inch display). I would prefer to instal Natty Narwhal, but would surely settle for Maverick Meerkat (which I have a install dvd of). I have an install of OS X Snow Leopard AND a Bootcamp Partition of Windows 7. I would like to keep all these partitions and setup a triple boot system. If it can work, I'm also wondering if it'd be safe to install all updates from the update manager once it's installed. Thank you in advance. :)

    Read the article

  • VMMap - awesome memory analysis tool

    VMMap is a process virtual and physical memory analysis utility. It shows a breakdown of a process's committed virtual memory types as well as the amount of physical memory (working set) assigned by the operating system to those types. Besides graphical representations of memory usage, VMMap also shows summary information and a detailed process memory map. Powerful filtering and refresh capabilities allow you to identify the sources of process memory usage and the memory cost of application features. Besides flexible views for analyzing live processes, VMMap supports the export of data in multiple forms, including a native format that preserves all the information so that you can load back in. It also includes command-line options that enable scripting scenarios. VMMap is the ideal tool for developers wanting to understand and optimize their application's memory resource usage. span.fullpost {display:none;}

    Read the article

  • Instapaper Updates; Sports Native Social Media Sharing, Browsing, and More

    - by Jason Fitzpatrick
    Popular web content manager Instantpaper has updated to version 3.0 and brings a host of new features like native support for social media sharing, a recommendation system, in-app web browsing and more. Last year we shared a detailed guide with you on how to use Instapaper to save content from the web to your iOS device for later reading–definitely check it out if you’re unfamiliar with Instapaper. Some of the new features in Instapaper 3.0 include a social recommendation system where you can follow other Instapaper users and see the articles they are liking/sharing, native support for sharing to Twitter, Facebook, and other social media systems, smart rotation lock on the display, and more efficient article downloading and storage. Check out the link below to read a full rundown of the new features on the Instapaper blog. Instapaper 3.0 Is Here! [Instapaper via O'Reilly Radar] HTG Explains: What Are Character Encodings and How Do They Differ?How To Make Disposable Sleeves for Your In-Ear MonitorsMacs Don’t Make You Creative! So Why Do Artists Really Love Apple?

    Read the article

  • Corona sdk events dispatched with dispatchEvent() are handled directly upon call. Why so?

    - by Amoxus
    I noticed to my surprise that an event created with dispatchEvent(event) gets handled directly when called, and not together with other events at a specific phase of the frame loop. Two main reasons of having an event system are: so that you can call code B from code A, but still want to prioritize code A. to make sure there are no freaky loopedy loops where code A calls code B calls code A ... I wonder what Ansca's rationale behind having events being handled directly this way is. And does Corona handle loopedy loops and other such pitfalls gracefully? The following code demonstrates dispatchEvent(): T= {} Z = display.newRect(100,100,100,100) function T.doSomething() print("T.doSomething: begun") local event = { name="myEventType", target=T } Z:dispatchEvent( event ) print("T.doSomething: ended") end function Z.sayHello(event) print("Z.sayHello: begun and ended") end Z:addEventListener("myEventType", Z.sayHello) print("Main: begun") T.doSomething() print("Main: ended") However Ansca claims the contrary at http://developer.coronalabs.com/reference/index/objectdispatchevent Can anyone clear this up a little? ( Using Corona simulator V 2012.840 )

    Read the article

  • Possible to pass pygame data to memory map block?

    - by toozie21
    I am building a matrix out of addressable pixels and it will be run by a Pi (over the ethernet bus). The matrix will be 75 pixels wide and 20 pixels tall. As a side project, I thought it would be neat to run pong on it. I've seen some python based pong tutorials for Pi, but the problem is that they want to pass the data out to a screen via pygame.display function. I have access to pass pixel information using a memory map block, so is there anyway to do that with pygame instead of passing it out the video port? In case anyone is curious, this was the pong tutorial I was looking at: Pong Tutorial

    Read the article

  • xen + debian network after upgrade squeeze to wheeze

    - by rush
    I've got a Debian + Xen server. After a system upgrade to the stable version the network doesn't come up after boot. Every time after reboot I need to bring it up manually. The network configuration was not changed during upgrade. Here is /etc/network/interfaces: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 11.22.33.44 netmask 255.255.255.0 gateway 11.22.33.1 nameserver 8.8.8.8 After boot ip r shows no route and eth0 has no ip address. Manually ip and route setup goes fine and network starts working. Messages from dmesg about network I've found (looks like nothing interesting) [ 3.894401] ACPI: Fan [FAN3] (off) [ 3.894444] ACPI: Fan [FAN4] (off) [ 4.178348] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:1e:67:14:66:c9 [ 4.178351] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 4.178392] e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: 0100FF-0FF [ 4.178413] e1000e 0000:02:00.0: Disabling ASPM L0s L1 [ 4.178432] xen: registering gsi 16 triggering 0 polarity 1 -- [ 4.223667] ata5: DUMMY [ 4.223668] ata6: DUMMY [ 4.289153] e1000e 0000:02:00.0: eth1: (PCI Express:2.5GT/s:Width x1) 00:1e:67:14:66:c8 [ 4.289155] e1000e 0000:02:00.0: eth1: Intel(R) PRO/1000 Network Connection [ 4.289245] e1000e 0000:02:00.0: eth1: MAC: 3, PHY: 8, PBA No: 1000FF-0FF [ 4.506908] usb 1-1: new high-speed USB device number 2 using ehci_hcd [ 4.542920] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) -- [ 10.362999] EXT4-fs (dm-23): mounted filesystem with ordered data mode. Opts: (null) [ 10.419103] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null) [ 10.988255] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 13.175533] Event-channel device installed. [ 13.287555] XENBUS: Unable to read cpu state -- [ 13.288670] XENBUS: Unable to read cpu state [ 13.965939] Bridge firewalling registered [ 14.134048] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 14.283862] ADDRCONF(NETDEV_UP): peth0: link is not ready [ 14.284543] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 17.800627] e1000e: peth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 17.801377] ADDRCONF(NETDEV_CHANGE): peth0: link becomes ready [ 18.307278] device peth0 entered promiscuous mode [ 24.538899] eth1: no IPv6 routers present [ 28.570902] peth0: no IPv6 routers present I've upgraded two servers and I've such behaviour on two of them. How to fix this and get network starts automatically on boot?

    Read the article

  • Ubuntu server apt-get says "(-5 - No address associated with hostname)"

    - by Srini
    I have a ubuntu 12.04 server. Running sudo apt-get update on it produces errors like this: W: Failed to fetch http://au.archive.ubuntu.com/ubuntu/dists/precise-backports/main/binary-i386/Packages Something wicked happened resolving 'au.archive.ubuntu.com:http' (-5 - No address associated with hostname) I am able to ping all the other hosts on the network and also Google's DNS 8.8.8.8. But am unable to ping www.google.com. So, I'm guessing something is wrong with my DNS setup, but not sure what. I use static IP and my /etc/network/interfaces looks like this: auto eth0 iface eth0 inet static address 192.168.1.50 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.0.255 gateway 192.168.1.1 #dns-nameserver 203.12.160.35 203.12.160.36 #nameserver 203.12.160.35 203.12.160.36 My /etc/resolv.conf and /etc/resolvconf/resolv.conf.d/base are both empty and my /etc/resolvconf/resolv.conf.d/original says: nameserver 192.168.1.1 Any help would be greatly appreciated. P.S. I've googled it a bit and the common resolution is to switch to DHCP which I don't want to do since this is my home server. Thanks Srini

    Read the article

  • -webkit-linear-gradient Not working in Dreamweaver CS6

    - by Ken
    I've tried multiple times to apply the following piece of code in a CSS document: display: block; width: 500px; margin: 500px auto; padding: 15px; text-align: center; border: 4px solid blue; background: -webkit-linear-gradient(top,black,white); outline: 7px solid red; Everything appears correctly, except the gradient. I have CS6 Live View turned on, and it still refuses to appear. All I get in my box is a white background, as opposed to the black to white gradient. However, when I type the same line of code into the trial of Coda 2 I downloaded, it works perfectly. Is there anything I can do to resolve the issue?

    Read the article

  • VMMap - awesome memory analysis tool

    VMMap is a process virtual and physical memory analysis utility. It shows a breakdown of a process's committed virtual memory types as well as the amount of physical memory (working set) assigned by the operating system to those types. Besides graphical representations of memory usage, VMMap also shows summary information and a detailed process memory map. Powerful filtering and refresh capabilities allow you to identify the sources of process memory usage and the memory cost of application features. Besides flexible views for analyzing live processes, VMMap supports the export of data in multiple forms, including a native format that preserves all the information so that you can load back in. It also includes command-line options that enable scripting scenarios. VMMap is the ideal tool for developers wanting to understand and optimize their application's memory resource usage. span.fullpost {display:none;}

    Read the article

  • Network topology for both direct and routed traffic between two nodes

    - by IndigoFire
    Despite it's small size, this is the most difficult network design problem I've faced. There are three nodes in this network: PC running Windows XP with an internal WiFi adapter.Base station with both WiFi and a Wireless Modem (WiModem)Mobile device with both WiFi and WiModem The modem is a low-bandwidth but high-reliability connection. We'd like to use WiFi for high-bandwidth stuff like file transfers when the mobile is nearby, and the modem for control information. Here's the tricky part: we'd like the wifi traffic to go directly from the mobile to the PC, as rebroadcasting packets on the same WiFi channel takes up double the bandwidth. We can do that with a manual configuration by giving the both the PC and the base station two IP addresses for their WiFi interfaces: one on a subnet shared with the mobile, and one on their own subnet. The routes on the PC are set up so that any traffic going to the mobile via WiModem goes through the secondary IP address so that return traffic from the mobile also goes through the WiModem. Here's what that looks like: PC WiFi 1: 192.168.2.10/24 WiFi 2: 192.168.3.10/24 Default route: 192.168.2.1 Base Station WiFi 1: 192.168.2.1/24 WiFi 2: 192.168.3.1/24 WiModem: 192.168.4.1/24 Mobile WiFi: 192.168.3.20/24 WiModem: 192.168.4.20/24 We'd like to move to having the base station automatically configure the mobile and PC, as the manual setup is problematic when you start having multiple mobiles and PCs. This means that the PC can only have 1 IP address and needs to be treated as being pretty simple. Is it possible to have a setup driven by DHCP on the base station that is efficient with bandwidth?

    Read the article

  • What is a light-weight "slideshow" script that could integrate w/ CMS?

    - by aslum
    I'm looking to reduce the footprint of my Strict html 4.01 front page. One possible way is to combine much of the "upcoming events" into a single small box, and have them automagically switch which one is displayed every few seconds. I'm sure there are a bunch of this kind of thing written already, and surely an open source one exists, but I haven't had much luck find one. I'd prefer javascript to jQuery as installing jQuery might not be an option, but if the best-fit script requires jQuery I'd certainly be willing to investigate that route. If it can display content from Wordpress that would be ideal.

    Read the article

  • Preventing endless forwarding with two routers

    - by jarmund
    The network in quesiton looks basically like this: /----Inet1 / H1---[111.0/24]---GW1---[99.0/24] \----GW2-----Inet2 Device explaination H1: Host with IP 192.168.111.47 GW1: Linux box with IPs 192.168.111.1 and 192.168.99.2, as well as its own route to the internet. GW2: Generic wireless router with IP 192.168.99.1 and its own route to the internet. Inet1 & Inet2: Two possible routes to the internet In short: H has more than one possible route to the internet. H is supposed to only access the internet via GW2 when that link is up, so GW1 has some policy based routing special just for H1: ip rule add from 192.168.111.47 table 991 ip route add default via 192.168.99.1 table 991 While this works as long as GW2 has a direct link to the internet, the problem occurs when that link is down. What then happens is that GW2 forwards the packet back to GW1, which again forwards back to GW2, creating an endless loop of TCP-pingpong. The preferred result would be that the packet was just dropped. Is there something that can be done with iptables on GW1 to prevent this? Basically, an iptables-friendly version of "If packet comes from GW2, but originated from H1, drop it" Note1: It is preferable not to change anything on GW2. Note2: H1 needs to be able to talk to both GW1 and GW2, and vice versa, but only GW2 should lead to the internet TLDR; H1 should only be allowed internet access via GW2, but still needs to be able to talk to both GW1 and GW2. EDIT: The interfaces for GW1 are br0.105 for the '99' network, and br0.111 for the '111' network. The sollution may or may not be obnoxiously simple, but i have not been able to produce the proper iptables syntax myself, so help would be most appreciated. PS: This is a follow-up question from this question

    Read the article

  • HTG Explains: Why Screen Savers Are No Longer Necessary

    - by Chris Hoffman
    Screen savers are a left-over solution from a previous technology. In spite of their name, screen savers no longer “save” anything – all they do is waste electricity. Screen savers are not necessary on modern, flat-panel LCD displays. Having your computer automatically turn off its display is the new “screen saver” – it saves energy, reduces your electricity bill, and increases your battery life. Screen savers may look pretty, but they do it when no one is looking. HTG Explains: Why Screen Savers Are No Longer Necessary 6 Ways Windows 8 Is More Secure Than Windows 7 HTG Explains: Why It’s Good That Your Computer’s RAM Is Full

    Read the article

  • Custom HTML Tags: Are there any specifications stating a standard way to handle them?

    - by blesh
    It seems like for years they've just been given default styling and inline display. Is there a spec somewhere that has dictated this? I've looked over the RFC's but I'm not particularly good with RFC-ese, and I didn't notice anything anywhere. For example <body> Some content <mycustomtag>something else</mycustomtag> more content. </body> I can still style it with CSS, and the browser doesn't outright vomit... so it seems like there is some sort of expected behavior. Was that dictated by a specification?

    Read the article

  • If I intend to use Hadoop is there a difference in 12.04 LTS 64 Desktop and Server?

    - by Charles Daringer
    Sorry for such a Newbie Question, but I'm looking at installing M3 edition of MapR the requirements are at this link: http://www.mapr.com/doc/display/MapR/Requirements+for+Installation And my question is this, is the Desktop Kernel 64 for 12.04 LTS adequate or the "same" as the Server version of the product? If I'm setting up a lab to attempt to install a home cluster environment should I start with the Server or Dual Boot that distribution? My assumption is that the two are the same. That I can add any additional software to the 64 as needed. Can anyone elaborate on this? Have I missed something obvious?

    Read the article

  • Lost power during upgrade, how do I recover?

    - by Ryan McClure
    I was attempting to update my 11.10 install to 12.04beta. During the install step, I accidentally lost power to my laptop (the power cable came unplugged) and it shut down. Whenever I go to boot now, I can select my install via Grub and it loads up to where the sign-in should happen, but I get a display that looks like what you see as soon as you shut down. It looks like it locks after checking for the battery. Is there anyway, with or without Live media, to restore my machine's install/update to 12.04 but still keep my settings/applications/files?

    Read the article

  • Windows 8/Surface Lunch Event Summary

    - by Tim Murphy
    Today was a big day for Microsoft with two separate launch event.  The first for Windows 8 and all of it’s hardware partners.  The second was specifically to introduce the Microsoft Windows 8 Surface tablet.  Below are some of the take-aways I got from the webcasts. Windows 8 Launch The three general area that Microsoft focused on were the release of the OS itself, the public unveiling of the Windows Store and the new devices available from its hardware partners. The release of the OS focused on the fact that it will be available at mid-night tonight for both new PCs and for upgrades.  I can’t say that this interested me that much since it was already known to most people.  I think what they did show well was how easy the OS really is to use. The Windows Store is also not a new feature to those of us who have been running the pre-release versions of Windows 8 or have owned Windows Phone 7 for the past 2 years.  What was interesting is that the Windows Store launches with more apps available than any other platforms store at their respective launch.  I think this says a lot about how Microsoft focuses on the ability of developers to create software and make it available.  The of course were sure to emphasize that the Windows Store has better monetary terms for developers than its competitors. The also showed off the fact that XBox Music streaming is available for to all Windows 8 user for free.  Couple this with the Bing suite of apps that give you news, weather, sports and finance right out of the box and I think most people will find the environment a joy to use. I think the hardware demo, while quick and furious, really show where Windows shine: CHOICE!  They made a statement that over 1000 devices have been certified for Windows 8.  They showed tablets, laptops, desktops, all-in-ones and convertibles.  Since these devices have industry standard connectors they give a much wider variety of accessories and devices that you can use with them. Steve Balmer then came on stage and tried to see how many times he could use the “magical”.  He focused on how the Windows 8 OS is designed to integrate with SkyDrive, Skype and Outlook.com.  He also enforced that they think Windows 8 is the best choice for the Enterprise when it comes to protecting data and integrating across devices including Windows Phone 8. With that we were left to wait for the second event of the day. Surface Launch The second event of the day started with kids with magnets.  Ok, they were adults, but who doesn’t like playing with magnets.  Steven Sinofsky detached and reattached the Surface keyboard repeatedly, clearly enjoying himself.  It turns out that there are 4 magnets in the cover, 2 for alignment and 2 as connectors. They then went to giving us the details on the display.  The 10.6” display is optically bonded to the case and is optimized to reduce glare.  I think this came through very well in the demonstrations. The properties of the case were also a great selling point.  The VaporMg allowed them to drop the device on stage, on purpose, and continue working.  Of course they had to bring out the skate boards made from Surface devices. “It just has to feel right” was the reason they gave for many of their design decisions from the weight and size of the device to the way the kickstand and camera work together.  While this gave you the feeling that the whole process was trial and error you could tell that a lot of science went into the specs.  This included making sure that the magnets were strong enough to hold the cover on and still have a 3 year old remove the cover without effort. I am glad that they also decided the a USB port would be part of the spec since it give so many options.  They made the point that this allows Surface to leverage over 420 million existing devices.  That works for me. The last feature that I really thought was important was the microSD port.  Begin stuck with the onboard memory has been an aggravation of mine with many of the devices in the market today. I think they did job of really getting the audience to understand why you want this platform and this particular device.  Using personal examples like creating a video of a birthday party and being in it or the fact that the device was being used to live blog the event and control the lights and presentation.  They showed very well that it was not only fun but very capable of getting real work done.  Handing out tablets to the crowd didn’t hurt either.  In the end I really wanted a Surface even though I really have no need for one on a daily basis.  Great job Microsoft! del.icio.us Tags: Windows 8,Win8,Windows 8 Luanch

    Read the article

  • ASP.NET Tooltips Extender Control

    Tooltips is always a good usability practice to display descripitve and meaningful message on UI, which provide guidance and extra information to users visually. However, I cannot find this kind of handy "control" in the latest version (40412) of the AJAX control toolkit. (Feature request?) The traditional HTML "title" or "tooltips" tag of control cannot make the users (nor even developers) happy, so I searched and found this Tooltip Extender control today. It is nice and handy for...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Desktop background will not load after performing aticonfig --adapter=all --ovt=opengl

    - by user1571959
    I am trying to get Eagle to work on ubuntu 14.04 LTS. When I run Eagle and open a schematic the display is not refreshing/redrawing correctly. One solution that I found was to install the flgrx drivers and do the aticonfig command to use opengl... So I did and rebooted. Now when I turn on my laptop I get all the way to the login screen, login, and then nothing happens, it just goes to the background image with no icons or anything... I tried deleting and copying the original xorg.conf file and no results... What do I do other than reinstalling Ubuntu? is there anyway to force the original driver?

    Read the article

  • Tunnels in pseudo 3D racing game

    - by Nicholas
    How would one go about doing tunnels in a pseudo 3D racing game ? The main problem I have at the moment is perspective - I cant think of a way, beyond having to Z sort the sprites and tunnel coordinates, so that vehicles are displayed in front of the tunnel entrance and somehow block the display when out of site. I would like my tunnels to be used on both flat, curved and hills and slopes. The tunnel enterance/exit is made up of 3 separate graphics, (left, right and top), whilst inside the tunnel it is just one line graphic along the top (the idea being its supposed to be a set distance above the current vertical road position). As you can see from the picture, the vehicles are still being rendered whilst in the tunnel. I've converted the Code Incomplete road system to GLBasic.

    Read the article

  • Ubuntu (and any other linux os) not booting from cd or usb

    - by Amith
    I will tell you the whole story,one night when i was using KDE on Ubuntu 10.10 Kwin crashed then i shut down the os next day when i booted it the display came completely garbled and i went to safe graphics mode ,it worked and in reinstalled the Nvidia drivers and then restarted .Then immediatly, It said No init found Busybox XX.XX then I thought ill do a fresh install I inserted the ubuntu cd provided to me by Canonical.When i pressed 'try ubuntu without installing' instead of the graphic boot screen i saw.Ubuntu 10.10 in regular text and a progress bar few seconds after that the screen was flooded with error messages first alot of white then red.I then went to my win7 installation and saw a website which told me to find a Ext3 reader and format the ubuntu partition and the swap.I did that and when i restarted. GRUB configuration not found grub> Then it took my win 7 ERD and restored 7's bootloder Xp and 7 were working i put in the livecd again,Same error,Now usin my seven,Please help geeks,Ive even tried Knoppix,Fedora,Debiane.t.c they wont boot and i want to retain my win 7 and winxp partitions,I really miss linux.

    Read the article

  • Command to determine whether a fullscreen application is running?

    - by George Edison
    I have a small shell script that plays a little jingle and displays a notification whenever I get a new email. The problem is that this shell script can get invoked anytime - including when I'm watching a DVD / video in fullscreen mode with the sound turned up quite a bit - which is quite annoying. I'd like to enhance this script with the ability to detect whether an application is in fullscreen mode. I know this must be somehow possible because notifications don't display under those circumstances. What command can I use?

    Read the article

  • Building (simple) stellar systems

    - by space borg
    hi I'm currently looking at how to simulate easily some stellar systems (meaning some central stars and then some planets with maybe satellites), in order to allow later some space based strategy game (hence with space ships moving around). This should all be based around time (so the state of each system differs through time) I'm quite struggling with the math behind this topic, like for example: - ellipse related math, - creating the path from planet A to B having time in mind (respective positions will change over time)... Do you know of any resources for that ? I wouldn't mind even buying books about it... thanks in advance best space borg side note: how to display all this stuff isn't a matter at this point in time, I'll simple plans for that (basically sticking to 2D and a "high level view" with no space ships/planets details, just markers)

    Read the article

  • For some reason I can't get ATI FGLRX Drivers to support 3D acceleration on Ubuntu 12.04

    - by HungryMan
    I have an ATI 5650m and I've had 0 issues with 3D Acceleration in the past. I had to reinstall Ubuntu entirely, and now with the 12.6 drivers I get - One or more tools required for installation cannot be found on the system I can't seem to solve this issue. I installed the FGLRX drivers through the "alternate command line" guide on the Ubuntu Wiki including the instructions for getting 3D support. They seem to install but I get an error with vainfo libva: VA-API version 0.32.0 Xlib: extension "XFree86-DRI" missing on display ":0.0". libva: va_getDriverName() returns 0 libva: Trying to open /usr/lib/x86_64-linux-gnu/dri/fglrx_drv_video.so libva error: /usr/lib/x86_64-linux-gnu/dri/fglrx_drv_video.so init failed libva: va_openDriver() returns -1 vaInitialize failed with error code -1 (unknown libva error),exit I have tried help here: http://ubuntuforums.org/showthread.php?t=2014440 It's a bit frustrating as I can do basically nothing without 3D support. I can't use super + direction or super + w or even configure the Unity bar to be 32px. If anyone could help I'd appreciate that.

    Read the article

< Previous Page | 389 390 391 392 393 394 395 396 397 398 399 400  | Next Page >