Search Results

Search found 12705 results on 509 pages for 'ip routing'.

Page 394/509 | < Previous Page | 390 391 392 393 394 395 396 397 398 399 400 401  | Next Page >

• Seeking recommendations on resolving sporadic network connectivity latency for Notes client

  - by Russell Maher

  I have Domino servers in geographically disperse data centers in the U.S. Sometimes when I open an NSF on one of those servers the connection times out then when I open the NSF again it connects immediately. This has been going on for years and during that time I have upgraded and changed my own internet connection and moved servers to different data centers. Of course I have direct connection documents using fixed IP addresses. When I do a Notes client Trace nothing is out of the ordinary. My business partner experiences the same thing from an entirely different city and different ISP but to the same servers. Never have any trouble connecting to the HTTP server, just over port 1352. Does anyone have any recommendations on a process to determine what is causing this problem?

  Read the article

• How to connect another computer to the router

  - by Call Me Dummy

  I already have a Windows 7 PC connected to my NETGEAR WGR614v10 router and I am able to use internet in that computer. Now I need to connect one of my old computer to the router to share the internet. It's also running Windows 7. I already connected it to the router via a CAT-5 cable but I am not able to use internet. The first computer was set up by a technician. Its IP address is 192.168.1.3, and the default gateway is 192.168.1.1. On the second PC, I changed the IPv4 to 192.168.1.4 and default gateway and preferred DNS to 192.168.1.1, but it's not working. What can I do?

  Read the article

• Connecting via url to a server that is on the same network as me

  - by Axehead

  Good day, I'm having problems with the ftp server I've just set up. I've already managed to configure my modem and wireless router to open up port 21 and setup ftp in my server. But It seems that when I try to connect to it when I'm in the same network as the server via URL, (ftp://mydomain.com) it redirects me to the modem's web interface. But then when I try to connect to it outside the network using a different internet connection. It succeeds. It also succeeds when I'm in the same network and I go to ftp://192.168.., the server's local IP. Am I supposed to adjust something in the modem or router? Or is this a different problem altogether? BTW I'm using Windows Server 2008 r2 as my server's OS and using IIS for ftp.

  Read the article

• Why can't I access the WebUI of my DNS-323 NAS after a firmware upgrade?

  - by anonymous2

  Hi Everyone, I just bought a D-Link DNS-323 NAS Enclosure, and have run into a problem. I read that the firmware that had shipped with (1.07) did not support 2TB drives, so I downloaded firmware 1.08. Turned on the device for thwe first time and went straight to the WebUI (everything looked/worked fine) Proceeded with the firmware update, completed successfully. Rebooted and I cannot access the WebUI. I can see the NAS connected via my router interface I can also ping the ip adress assigned, but I cannot access the WebUI or find it via D-Link easy search software. I have tried the factory reset button, but that does not seem to be doing anything, the square blue light just keeps flashing from the moment the unit is powered on, whether I press the reset button or not, and the symptoms remain the same... PS. I did/do not have any drives installed yet. Please help?

  Read the article

• "No input file specified" - unable to access phpMyAdmin using debian squeeze

  - by guiltybyintent

  I have installed phpMyAdmin on my VPS LAMP server (Debian Squeeze/Apache2/MySQL/PHP5), but am unable to access it: //my-ip/phpmyadmin/ and //my-domain/phpmyadmin/ both produce the following error message: "No input file specified". The phpMyAdmin FAQ identifies this as a permission problem, but the suggested solution seems not to apply to my situation. Every other solution I have come across involves removing/purging and reinstalling phpmyadmin - which I have done several times, always to the same result. Previous posts in this forum typically relate to Nginx, which I have not installed. Thanks in advance for any help!

  Read the article

• How do I set up my home server to go directly to a port other than 80

  - by Kevin

  I'm using dyndns, a lynksis wt54g router, and tomcat 7 with spring to set up a web server. This is my first time to attempt this. I'm sure this is a very common question, but I don't know enough to find the answer after quite a bit searching. Dyndns is successfully forwarding to my ip. The main problem is, the router admin login is coming up when my url is used. I'm hosting my site on port 8080. I have port forwarding set up for port 8080 but my request times out when I attempt to use my url like this www.myurl1234.com:8080. I don't want users to have to type the port anyway. I also tried changing the management port to 82 and hosting on port 80, but I still get the router admin login when I use my url. Where am I going wrong? Can I set it up so that www.myurl1234.com goes straight to port 8080?

  Read the article

• how to properly edit hosts, hostname and resolf.conf? [migrated]

  - by Firewall

  i,v been searching the internet for a real noop tutorial on the subject but could not found any direct info. on how to edit these files the proper way. i,v got a debian internet server that i use to host some personal domains and runs squid and rTorrent. the server is up and running with no problems but i am confused about a few things. lets say that i named my server (foo), my domain is (example.com) and my public IP is 95.211.133.200 now: should /etc/hostname contains: tango.example.com or tango <----- just the server name should /etc/hosts contains: 127.0.0.1 localhost.localdomain localhost 95.211.133.200 foo.example.com foo should /etc/resolf.conf contains (along with the nameservers) both: domain example.com search example.com or just the first one. are there any other files that i should edit in order to make things right? last thing, the command: domainname returns: (none) i believe it should return (example.com). what should i do to correct that?

  Read the article

• How do I get my 192.168.* Linux server accessible via http://hostname/?

  - by rfrankel

  (Sorry if this question isn't worded well and/or is duplicate. I'm not a networking guy and I'm probably not using the right terms...this also makes it hard to see if this has already been answered.) I'm running a CentOS server in VirtualBox, Windows host, and I can see access Apache-hosted pages at http://192.168.1.109/ from machines on my LAN. But what I'd like is for people to be able to type http://hostname/ ...both because it's easier and primarily because I'm not sure that local IP is static. I'm not really sure how to proceed - could someone point me in the right direction? Thanks.

  Read the article

• Looking for an open source real-time network analysis program

  - by JrSysAdmin

  Can somebody recommend an open source real-time network analysis program? What I'm looking for the program to do is display a graph of bandwidth usage by IP within our internal network that can quickly be viewed any time we need to (typically when we want to quickly find out who is utilizing high amounts of bandwidth and slowing down the network). We ideally simply want to hook up a monitor on the wall of our server room to a system whose NIC will be in permissive mode to log all network activity in a visual manner which can easily be seen and running 24/7. Prefer open source as I do not have a budget for this project and prefer open source projects in general. I'd also prefer for this to be available for CentOS but any linux distro or Windows OS would be acceptable. Thanks!

  Read the article

• How to tunnel local port through proxy server?

  - by Joe Casadonte

  I have a non-proxy-aware program that I need to get working through an HTTP proxy server. The program (MYPROG) running on a machine I can configure at will (MYSRV) connects to a specific server (DESTSRV) on a specific port (DESTPRT). There is an existing HTTP proxy server (PROXYSRV:PROXYPRT) that will allow the traffic through if MYPROG was proxy-aware, but it isn't. Is there a way to listen locally on a specific port and forward the traffic through the proxy server? I can totally configure where MYPROG points to, so I could point it to MYSRV:4545 with the thought that some wonder program will redirect the data to DESTSRV:DESTPRT through PROXYSRV:PROXYPRT. I'm thinking IP Tables or netcat could do the trick if only I could figure them out... Thanks!

  Read the article

• What is causing my wireless problems?

  - by user34629

  I have a Dell XPS M1330, since I moved to my new house, the wireless barely works on it, my housemates report no problems, so I guess it's something to do with my laptop. It's eratic in normal mode, sometimes not working for days, usually working on-and-off, forcing me to reload pages a few times before they work, etc. It works perfectly in safe mode, the driver I'm using is the Intel PRO/Wireless 3945ABG Network Connection, version 12.4.4.5, with a date at 26/10/2009, the most recent one I could find, bluetooth is not enabled, and I'm running Vista 32-bit Home Premium, which it shipped with. I also tried disabling IPv6 and resetting the IP stack, both to no avail. Can anybody help me?

  Read the article

• ESX Firewall Command Troubles

  - by John

  Hi, I am working on creating some firewall rules to stop some of the SSH brute-force attacks that we have seen recently on our ESX server hosts. I have tried the following rules from the CLI to first block all SSH traffic and then allow the two ranges that I am interested in: esxcfg-firewall --ipruleAdd 0.0.0.0/0,22,tcp,REJECT,"Block_SSH" esxcfg-firewall --ipruleAdd 11.130.0.0/16,22,tcp,ACCEPT,"Allow_PUBLIC_SSH" esxcfg-firewall --ipruleAdd 10.130.0.0/16,22,tcp,ACCEPT,"Allow_PRIVATE_SSH" However, these rules are not working as intended. I know that if you do not enter the block rule first, then the allow rule will not be processed. We are now having the issue where the first entered allow rule is being ignored such that the block rule works and the last entered allow rule works. I was curious if anyone had any ideas on how I could allow a few different ranges of IP's with the esxcfg-firewall --ipruleAdd command? I am at a loss and am having a hard time locating examples or further documentation about this. Thanks in advance for your help with this.

  Read the article

• All email directed to 3rd party vendor except for one specific domain. How?

  - by jherlitz

  So we setup a site to site vpn tunnel with another company. We then proceeded to setup a DNS zone on each others dns servers and entered in each others Mail server name and IP, MX record and WWW record. This allowed us to send emails to each others mail servers through the site to site vpn. Now recently the other company started using MX Logic to scan all outbound and incoming mail. So all outbound email is directed to MX Logic. However we still want email between us to travel across the the Site to Site VPN tunnel. How can we specify that to happen for just one domain not to be directed to MX Logic? Stump on both ends and looking for help.

  Read the article

• How do I bridge connections in Debian?

  - by Josh

  In windows I can select Local Area Connection and Wireless Network Connection, right click and select Bridge Connections How can I achieve the same effect in Linux? (Debian to be exact) Pretty much I want Computer B to connect to Computer A via ethernet cable. Well Computer A is connected wirelessly. Allowing Computer B to get on the internet. == UPDATE == I've enabled IP forwarding and used the following iptables command: iptables -t nat -A POSTROUTING -o wlan0 -j MASQUERADE I'm still unable to access the internet from Computer B though.

  Read the article

• Computer connects to lan, but not the internet

  - by Jay

  I have a computer with Vista Home that can connect to the router, but it cannot get on the internet. I cannot ping google.com, the request times out. I've tried this on two separate networks and have no trouble with other computers connecting. I've renewed ipconfig, reset winsock, updated the wireless adapter, and the hosts file looks fine. I've tried disabling the firewall as well as a direct wired connection. I did a scan with Norton and it didn't find anything. Is there anything else I can try before resorting to a system restore? Update (Copied from Answer) Windows Update was able to find updates and install them (though, they could have already been downloaded previously). When I pinged Google by using their IP 66.102.9.103, it said it lost 25 percent of the packets. I successfully flushed the DNS but it didn't help. Also, I found safe mode with networking works fine.

  Read the article

• Set up router to vpn into proxy server

  - by NKimber

  I have a small network with a single LinkSys router connected to broadband in US via Comcast. I have a VPN proxy server account that I can use with a standard Windows connection, allowing me to have a geographic IP fingerprint in Europe, this is useful for a number of purposes. I want to setup a 2nd router that automatically connects via VPN to this proxy service, so any hardware that is connected to router 2 looks as though it is originating network requests in Europe, and any hardware connected to my main router has normal Comcast traffic (all requests are originating from USA). My 2nd router is a LinkSys WRT54G2, I'm having trouble getting this configured. Question, is what I'm trying to do even feasible? Should the WRT54G2 be able to do this with native functionality? Would flashing it with DD-WRT allow me to achieve my objectives?

  Read the article

• Hosting company that does Linux VPS and MS SQL

  - by danielmcq

  I'm looking for hosted solutions but there are so many companies that finding the right one using a Google search is a bit overwhelming. Ideally I would like a hosting company which has following options: -Linux VPSs - Individual VPSs should be fairly cheap since I plan on putting one or two services per VPS i.e web server on one (httpd and ColdFusion), an SVN server on another, etc. -Managed MS SQL databases - My company already has data in MS SQL databases and a lot of ColdFusion code written that has MS SQL specific commands in it. -Individually purchased dedicated IP addresses -Preferably located in the North America region My plan would be to setup one Linux VPS as a gateway/firewall/VPN server and have all of my traffic routed through so that my other servers would not use of bandwidth by talking to each other. The trick is also finding a company that does Linux VPS AND MS SQL databases. Does anybody know of any hosting companies offer what I'm looking for? Let me know if I need to add more details.

  Read the article

• Will this SPF record restrict delivery of email for the original domain?

  - by user199421

  As part of the product we offer we send emails on behalf of our clients. Because the emails don't come from an IP associated with the client they are sometimes flagged as spam. We advised some of our clients to add an SPF record approving us to send emails on their behalf. We saw immediate improvement in deliverability rates after making the change however one of our clients was notified by his hosting provider that the SPF record we suggested to add would "slightly restrict" all emails that don't come from our servers (including our client's own servers). The record we use is this: v=spf1 a mx include:ourdomain.com ~all So my question is if the warning we received about this is correct and if so why and what can be done to solve this (allow sending email both from original domain and by ourselves).

  Read the article

• trying to set up wireless router, failing

  - by j j

  Hi, I am trying to set up Netgear's wireless-n WNR2000 router, following their oversimplified 5- step process for plugging in wires, and I'm not having any success. It comes down to: once everything is wired and turned on in the correct order, all of the LEDs match the image they give of 'what should be lit up', but their setup disk still doesn't find the router. They have a site to set up the router manually, www.routerlogin.net, which I cannot navigate to, even while wired directly to the router. http://192.168.1.1 doesn't connect to anything, either. The interesting part: i get ping replies from Google's DNS server at 8.8.8.8 while this is set up. but cannot connect to any web site by name, since the router's DNS isn't set up. One thought is that the router and modem both have the same IP address, so it's conflicting, but I'm not sure how I'd resolve that. Any ideas?

  Read the article

• Cannot Ping PS3 Using a Wired Connection

  - by Post

  PS3 is using the inbuilt wireless network adapter (I cannot change this) When I try to ping the PS3 from ANY computer which is on a wired ethernet connection, I get Request Timed Out errors. Whenever I ping from a computer with a wireless connection, it works just fine. To be clear: Pinging from Wireless PC to Wireless PS3 works Pinging from Wired PC to Wireless PS3 fails I have tried this on several PC's and Laptops all with the same results. As an attempted solution I have set up static IP's on all related devices. More information: Default Gateway = 192.168.2.1 PS3(wireless) = 192.168.2.100 PC(wired) = 192.168.2.99 Subnet Mask(for both devices, I have made sure) = 255.255.255.0 Thanks

  Read the article

• Filtering downloading a file

  - by Ozgun Sunal

  people. i know there are several types of firewalls operating at different layers of OSI. ACLs(layer 3 firewalls filter based on port numbers and IP addresses), SPI(which examines the patterns of data at layer 3 and realise that data content is malicious or not) and application layer firewalls which is capable of understanding the data at that level. Considering this, i'll give an example and learn what i need to do. Lets say, we have a computer has access to the Internet. i want to download a file or display a web page from a website but block access to the another website/s or downloading. To do this, i cant block access to the web browser on the 3rd party firewall bcos that will shut down all access. ACLs wont already do it. So, which kind of firewall will make it possible to filter specific traffic and how?

  Read the article

• Hosing website on own server. What is Hardware requirement and Cost [closed]

  - by KuKu

  As i am about to finish my dream website, i need to host it on some server. I checked Amazon AWS Free Tier, i found it pretty complex. As i made full website in java(JSP + Servlet + mysql + Node.js), its been expensive to host. So i thought that why not to host on own server so that i will be fully dependent on my resources, not on any one else. And i know, in future i need to pay more and more to the other hosting company(because of uploading images and number of incoming users). So my question is, On initial stage what kind of hardware i will required. What can be the cost of that hardware? I already have 12MBPS broadband connection, will it be sufficient? It has static IP Address as well.

  Read the article

• Can't set session.http_only for php under Plesk 11

  - by TheFoOL

  I want to enable session.cookie_httponly for my domain. I added these lines for my domain (in additional configuration directives): session.cookie_httponly = On error_log = error.log Error log works fine (a file is created) whereas session.cookie_httponly doesn't (according to phpinfo()). But why not? I use Plesk 11 on Ubuntu Server 12.04. PHP as FastCGI. PHP 5.3.10-1ubuntu3.4. Safe mode is off. Domain is associated to a dedicated IP address. Website powered by Joomla 2.5.7.

  Read the article

• Bonding and default gateway problem (CentOS)

  - by lg

  I configured network bonding on two machine with centos 5.5. Bonding works well, but the problem is default gateway: it is not configured! I follow this tutorial. I added GATEWAY in both (and either) /etc/sysconfig/network and /etc/sysconfig/network-scripts/ifcfg-bond0. But, when I restart network (or server) there is no default gateway (route command). This is ip route ls output after network restart: 10.0.0.0/16 dev bond0 proto kernel scope link src 10.0.0.88 Where is my mistake?

  Read the article

• Connecting client to JBoss cluster

  - by Nivek

  I am new to JBoss. Basically I have managed to cluster 2 nodes with: Node 1: run.bat -c all -g DefaultPartition –u 230.0.0.4 -b 10.67.51.28 -Djboss.messaging.ServerPeerID=1 Node 2: run.bat -c all -g DefaultPartition –u 230.0.0.4 -b 10.67.50.21 -Djboss.messaging.ServerPeerID=2 I know that if i cofigure a Apache load balancing(Mod_JK) to sit infront of the cluster, the client simply just punch in the IP of the Apache, and Apache will redirect the traffic to the nodes. But I do not want to have a Apache infront of the cluster. So how do my client access the cluster?? Do i need to configure something in JBoss, or isit a MUST to have a load balancer for the client to access the cluster?? MANY thanks in advance....

  Read the article

< Previous Page | 390 391 392 393 394 395 396 397 398 399 400 401  | Next Page >