Search Results

Search found 10463 results on 419 pages for 'task tracking'.

Page 394/419 | < Previous Page | 390 391 392 393 394 395 396 397 398 399 400 401  | Next Page >

  • Get UITableView to scroll to the selected UITextField and Avoid Being Hidden by Keyboard

    - by Lauren Quantrell
    I have a UITextField in a table view on a UIViewController (not a UITableViewController). If the table view is on a UITableViewController, the table will automatically scroll to the textField being edited to prevent it from being hidden by the keyboard. But on a UIViewController it does not. I have tried for a couple of days reading through multiple ways to try to accomplish this and I cannot get it to work. The closest thing that actually scrolls is: -(void) textFieldDidBeginEditing:(UITextField *)textField { // SUPPOSEDLY Scroll to the current text field CGRect textFieldRect = [textField frame]; [self.wordsTableView scrollRectToVisible:textFieldRect animated:YES]; } However this only scrolls the table to the topmost row. What seems like an easy task has been a couple of days of frustration. I am using the following to construct the tableView cells: - (UITableViewCell *)tableView:(UITableView *)aTableView cellForRowAtIndexPath:(NSIndexPath *)indexPath { NSString *identifier = [NSString stringWithFormat: @"%d:%d", [indexPath indexAtPosition: 0], [indexPath indexAtPosition:1]]; UITableViewCell *cell = [aTableView dequeueReusableCellWithIdentifier:identifier]; if (cell == nil) { cell = [[[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:identifier] autorelease]; cell.accessoryType = UITableViewCellAccessoryNone; UITextField *theTextField = [[UITextField alloc] initWithFrame:CGRectMake(180, 10, 130, 25)]; theTextField.adjustsFontSizeToFitWidth = YES; theTextField.textColor = [UIColor redColor]; theTextField.text = [textFieldArray objectAtIndex:indexPath.row]; theTextField.keyboardType = UIKeyboardTypeDefault; theTextField.returnKeyType = UIReturnKeyDone; theTextField.font = [UIFont boldSystemFontOfSize:14]; theTextField.backgroundColor = [UIColor whiteColor]; theTextField.autocorrectionType = UITextAutocorrectionTypeNo; theTextField.autocapitalizationType = UITextAutocapitalizationTypeNone; theTextField.clearsOnBeginEditing = NO; theTextField.textAlignment = UITextAlignmentLeft; //theTextField.tag = 0; theTextField.tag=indexPath.row; theTextField.delegate = self; theTextField.clearButtonMode = UITextFieldViewModeWhileEditing; [theTextField setEnabled: YES]; [cell addSubview:theTextField]; [theTextField release]; } return cell; } I suspect I can get the tableView to scroll properly if I can somehow pass the indexPath.row in the textFieldDidBeginEditing method? Any help is appreciated.

    Read the article

  • WPF: Improving Performance for Running on Older PCs

    - by Phil Sandler
    So, I'm building a WPF app and did a test deployment today, and found that it performed pretty poorly. I was surprised, as we are really not doing much in the way of visual effects or animations. I deployed on two machines: the fastest and the slowest that will need to run the application (the slowest PC has an Intel Celeron 1.80GHz with 2GB RAM). The application ran pretty well on the faster machine, but was choppy on the slower machine. And when I say "choppy", I mean the cursor jumped even just passing it over any open window of the app that had focus. I opened the Task Manager Performance window, and could see that the CPU usage jumped whenever the app had focus and the cursor was moving over it. If I gave focus to another (e.g. Excel), the CPU usage went back down after a second. This happened on both machines, but the choppiness was only noticeable on the slower machine. I had very limited time to tinker on the deployment machines, so didn't do a lot of detailed testing. The app runs fine on my development machine, but I also see the CPU spiking up to 10% there, just running the cursor over the window. I downloaded the WPF performance tool from MS and have been tinkering with it (on my dev machine). The docs say this about the "Frame Rate" metric in the Perforator tool: For applications without animation, this value should be near 0. The app is not doing any heavy animation, but the frame rate stays near 50 when the cursor is over any window. The screens I tested on have column headers in a grid that "highlight" and buttons that change color and appearance when scrolled over. Even moving the mouse on blank areas of the windows cause the same Frame rate and CPU usage (doesn't seem to be related to these minor animations). (Also, I am unable to figure out how to get anything but the two default tools--Perforator and Visual Profiler--installed into the WPF performance tool. That is probably a separate question). I also have Redgate's profiling tool, but I'm not sure if that can shed any light on rendering performance. So, I realize this is not an easy thing to troubleshoot without specifics or sample code (which I can't post). My questions are: What are some general things to look for (or avoid) in the code to improve performance? What steps can I take using the WPF performance tool to narrow down the problem? Is the PC spec listed above (Intel Celeron 1.80GHz with 2GB RAM) too slow to be running even vanilla WPF applications?

    Read the article

  • How to change source order of <div> in less steps/automatically?

    - by metal-gear-solid
    How can i do this task automate. i need to change source order of div, which has same id in above 100 pages. i created example This is default condition <div class="identification"> <div class="number">Number 1</div> </div> <div class="identification"> <div class="number">Number 2</div> </div> <div class="identification"> <div class="number">Number 3</div> </div> <div class="identification"> <div class="number">Number 4</div> </div> <div class="identification"> <div class="number">Number 5</div> </div> <div class="identification"> <div class="number">Number 6</div> </div> I need lik this <div class="identification"> <div class="number">Number 1</div> </div> <div class="identification"> <div class="number">Number 3</div> </div> <div class="identification"> <div class="number">Number 2</div> </div> <div class="identification"> <div class="number">Number 6</div> </div> <div class="identification"> <div class="number">Number 4</div> </div> <div class="identification"> <div class="number">Number 5</div> </div> Is the manual editing only option? I use dreamweaver.

    Read the article

  • using AsyncTask class for parallel operationand displaying a progress bar

    - by Kumar
    I am displaying a progress bar using Async task class and simulatneously in parallel operation , i want to retrieve a string array from a function of another class that takes some time to return the string array. The problem is that when i place the function call in doing backgroung function of AsyncTask class , it gives an error in Doing Background and gives the message as cant change the UI in doing Background .. Therefore , i placed the function call in post Execute method of Asynctask class . It doesnot give an error but after the progress bar has reached 100% , then the screen goes black and takes some time to start the new activity. How can i display the progress bar and make the function call simultaneously.??plz help , m in distress here is the code package com.integrated.mpr; import android.app.Activity; import android.app.ProgressDialog; import android.content.Intent; import android.os.AsyncTask; import android.os.Bundle; import android.os.Handler; import android.view.View; import android.view.View.OnClickListener; import android.widget.Button; public class Progess extends Activity implements OnClickListener{ static String[] display = new String[Choose.n]; Button bprogress; @Override protected void onCreate(Bundle savedInstanceState) { // TODO Auto-generated method stub super.onCreate(savedInstanceState); setContentView(R.layout.progress); bprogress = (Button) findViewById(R.id.bProgress); bprogress.setOnClickListener(this); } @Override public void onClick(View v) { // TODO Auto-generated method stub switch(v.getId()){ case R.id.bProgress: String x ="abc"; new loadSomeStuff().execute(x); break; } } public class loadSomeStuff extends AsyncTask<String , Integer , String>{ ProgressDialog dialog; protected void onPreExecute(){ dialog = new ProgressDialog(Progess.this); dialog.setProgressStyle(ProgressDialog.STYLE_HORIZONTAL); dialog.setMax(100); dialog.show(); } @Override protected String doInBackground(String... arg0) { // TODO Auto-generated method stub for(int i = 0 ;i<40;i++){ publishProgress(5); try { Thread.sleep(1000); } catch (InterruptedException e) { // TODO Auto-generated catch block e.printStackTrace(); } } dialog.dismiss(); String y ="abc"; return y; } protected void onProgressUpdate(Integer...progress){ dialog.incrementProgressBy(progress[0]); } protected void onPostExecute(String result){ display = new Logic().finaldata(); Intent openList = new Intent("com.integrated.mpr.SENSITIVELIST"); startActivity(openList); } } }

    Read the article

  • Is it Bad Practice to use C++ only for the STL containers?

    - by gmatt
    First a little background ... In what follows, I use C,C++ and Java for coding (general) algorithms, not gui's and fancy program's with interfaces, but simple command line algorithms and libraries. I started out learning about programming in Java. I got pretty good with Java and I learned to use the Java containers a lot as they tend to reduce complexity of book keeping while guaranteeing great performance. I intermittently used C++, but I was definitely not as good with it as with Java and it felt cumbersome. I did not know C++ enough to work in it without having to look up every single function and so I quickly reverted back to sticking to Java as much as possible. I then made a sudden transition into cracking and hacking in assembly language, because I felt I was concentrated too much attention on a much too high level language and I needed more experience with how a CPU interacts with memory and whats really going on with the 1's and 0's. I have to admit this was one of the most educational and fun experiences I've had with computers to date. For obviously reasons, I could not use assembly language to code on a daily basis, it was mostly reserved for fun diversions. After learning more about the computer through this experience I then realized that C++ is so much closer to the "level of 1's and 0's" than Java was, but I still felt it to be incredibly obtuse, like a swiss army knife with far too many gizmos to do any one task with elegance. I decided to give plain vanilla C a try, and I quickly fell in love. It was a happy medium between simplicity and enough "micromanagent" to not abstract what is really going on. However, I did miss one thing about Java: the containers. In particular, a simple container (like the stl vector) that expands dynamically in size is incredibly useful, but quite a pain to have to implement in C every time. Hence my code currently looks like almost entirely C with containers from C++ thrown in, the only feature I use from C++. I'd like to know if its consider okay in practice to use just one feature of C++, and ignore the rest in favor of C type code?

    Read the article

  • .NET threading: how can I capture an abort on an unstarted thread?

    - by Groxx
    I have a chunk of threads I wish to run in order, on an ASP site running .NET 2.0 with Visual Studio 2008 (no idea how much all that matters, but there it is), and they may have aborted-clean-up code which should be run regardless of how far through their task they are. So I make a thread like this: Thread t = new Thread(delegate() { try { /* do things */ System.Diagnostics.Debug.WriteLine("try"); } catch (ThreadAbortException) { /* cleanup */ System.Diagnostics.Debug.WriteLine("catch"); } }); Now, if I wish to abort the set of threads part way through, the cleanup may still be desirable later on down the line. Looking through MSDN implies you can .Abort() a thread that has not started, and then .Start() it, at which point it will receive the exception and perform normally. Or you can .Join() the aborted thread to wait for it to finish aborting. Presumably you can combine them. http://msdn.microsoft.com/en-us/library/ty8d3wta(v=VS.80).aspx To wait until a thread has aborted, you can call the Join method on the thread after calling the Abort method, but there is no guarantee the wait will end. If Abort is called on a thread that has not been started, the thread will abort when Start is called. If Abort is called on a thread that is blocked or is sleeping, the thread is interrupted and then aborted. Now, when I debug and step through this code: t.Abort(); // ThreadState == Unstarted | AbortRequested t.Start(); // throws ThreadStartException: "Thread failed to start." // so I comment it out, and t.Join(); // throws ThreadStateException: "Thread has not been started." At no point do I see any output, nor do any breakpoints on either the try or catch block get reached. Oddly, ThreadStartException is not listed as a possible throw of .Start(), from here: http://msdn.microsoft.com/en-us/library/a9fyxz7d(v=VS.80).aspx (or any other version) I understand this could be avoided by having a start parameter, which states if the thread should jump to cleanup code, and foregoing the Abort call (which is probably what I'll do). And I could .Start() the thread, and then .Abort() it. But as an indeterminate amount of time may pass between .Start and .Abort, I'm considering it unreliable, and the documentation seems to say my original method should work. Am I missing something? Is the documentation wrong? edit: ow. And you can't call .Start(param) on a non-parameterized Thread(Start). Is there a way to find out if a thread is parameterized or not, aside from trial and error? I see a private m_Delegate, but nothing public...

    Read the article

  • How to resize an openGL window created with wglCreateContext?

    - by Nick
    Is it possible to resize an openGL window (or device context) created with wglCreateContext without disabling it? If so how? Right now I have a function which resizes the DC but the only way I could get it to work was to call DisableOpenGL and then re-enable. This causes any textures and other state changes to be lost. I would like to do this without the disable so that I do not have to go through the tedious task of recreating the openGL DC state. HWND hWnd; HDC hDC; void View_setSizeWin32(int width, int height) { // resize the window LPRECT rec = malloc(sizeof(RECT)); GetWindowRect(hWnd, rec); SetWindowPos( hWnd, HWND_TOP, rec->left, rec->top, rec->left+width, rec->left+height, SWP_NOMOVE ); free(rec); // sad panda DisableOpenGL( hWnd, hDC, hRC ); EnableOpenGL( hWnd, &hDC, &hRC ); glMatrixMode(GL_PROJECTION); glLoadIdentity(); glOrtho(-(width/2), width/2, -(height/2), height/2, -1.0, 1.0); // have fun recreating the openGL state.... } void EnableOpenGL(HWND hWnd, HDC * hDC, HGLRC * hRC) { PIXELFORMATDESCRIPTOR pfd; int format; // get the device context (DC) *hDC = GetDC( hWnd ); // set the pixel format for the DC ZeroMemory( &pfd, sizeof( pfd ) ); pfd.nSize = sizeof( pfd ); pfd.nVersion = 1; pfd.dwFlags = PFD_DRAW_TO_WINDOW | PFD_SUPPORT_OPENGL | PFD_DOUBLEBUFFER; pfd.iPixelType = PFD_TYPE_RGBA; pfd.cColorBits = 24; pfd.cDepthBits = 16; pfd.iLayerType = PFD_MAIN_PLANE; format = ChoosePixelFormat( *hDC, &pfd ); SetPixelFormat( *hDC, format, &pfd ); // create and enable the render context (RC) *hRC = wglCreateContext( *hDC ); wglMakeCurrent( *hDC, *hRC ); } void DisableOpenGL(HWND hWnd, HDC hDC, HGLRC hRC) { wglMakeCurrent( NULL, NULL ); wglDeleteContext( hRC ); ReleaseDC( hWnd, hDC ); }

    Read the article

  • ajaxSubmit and Other Code. Can someone help me determine what this code is doing?

    - by Matt Dawdy
    I've inherited some code that I need to debug. It isn't working at present. My task is to get it to work. No other requirements have been given to me. No, this isn't homework, this is a maintenance nightmare job. ASP.Net (framework 3.5), C#, jQury 1.4.2. This project makes heavy use of jQuery and AJAX. There is a drop down on a page that, when an item is chosen, is supposed to add that item (it's a user) to an object in the database. To accomplish this, the previous programmer first, on page load, dynamically loads the entire page through AJAX. To do this, he's got 5 div's, and each one is loaded from a jquery call to a different full page in the website. Somehow, the HTML and BODY and all the other stuff is stripped out and the contents of the div are loaded with the content of the aspx page. Which seems incredibly wrong to me since it relies on the browser to magically strip out html, head, body, form tags and merge with the existing html head body form tags. Also, as the "content" page is returned as a string, the previous programmer has this code running on it before it is appended to the div: function CleanupResponseText(responseText, uniqueName) { responseText = responseText.replace("theForm.submit();", "SubmitSubForm(theForm, $(theForm).parent());"); responseText = responseText.replace(new RegExp("theForm", "g"), uniqueName); responseText = responseText.replace(new RegExp("doPostBack", "g"), "doPostBack" + uniqueName); return responseText; } When the dropdown itself fires it's onchange event, here is the code that gets fired: function SubmitSubForm(form, container) { //ShowLoading(container); $(form).ajaxSubmit( { url: $(form).attr("action"), success: function(responseText) { $(container).html(CleanupResponseText(responseText, form.id)); $("form", container).css("margin-top", "0").css("padding-top", "0"); //HideLoading(container); } } ); } This blows up in IE, with the message that "Microsoft JScript runtime error: Object doesn't support this property or method" -- which, I think, has to be that $(form).ajaxSubmit method doesn't exist. What is this code really trying to do? I am so turned around right now that I think my only option is to scrap everything and start over. But I'd rather not do that unless necessary. Is this code good? Is it working against .Net, and is that why we are having issues?

    Read the article

  • Nested Execution Flow Control

    - by chris
    I've read tens of answers related to callbacks, promises and other ways to control flow, but I can't still wrap my head around this task, obviously due to my lack of competence. I have a nested problem: In test_1() (and the other functions) I would like to ensure that the rows are added to the table according to the order in which the elements are in the object; I would like to execute either test_2 or test_3 (or both after each other) only after test_1 has finished completely. Actually the right sequence will only be known at runtime (there will be a switch with the possible sequences, like 1,2,3 or 1,3,2 or 1,2,1,3 or 1,3,3,2, etc...) Code: $(function () { // create table tbl = document.createElement('table'); tbl.className = "mainTbl"; $("body").append(tbl); }); function test_1() { $.each(obj, function () { var img = new Image(); img.onload = function () { // add row of data to table var row = tbl.insertRow(-1); var c1 = row.insertCell(0); c1.innerHTML = "loaded"; }; img.onerror = function () { // add row of data to table var row = tbl.insertRow(-1); var c1 = row.insertCell(0); c1.innerHTML = "not loaded"; }; img.src = this.url; }); } function test_2() { $.each(obj, function () { var img = new Image(); img.onload = function () { // add row of data to table var row = tbl.insertRow(-1); var c1 = row.insertCell(0); c1.innerHTML = "loaded"; }; img.onerror = function () { // add row of data to table var row = tbl.insertRow(-1); var c1 = row.insertCell(0); c1.innerHTML = "not loaded"; }; img.src = this.url; }); } function test_3() { $.each(obj, function () { var img = new Image(); img.onload = function () { // add row of data to table var row = tbl.insertRow(-1); var c1 = row.insertCell(0); c1.innerHTML = "loaded"; }; img.onerror = function () { // add row of data to table var row = tbl.insertRow(-1); var c1 = row.insertCell(0); c1.innerHTML = "not loaded"; }; img.src = this.url; }); } I know that calling the functions in sequence doesn't work as they don't wait for each other... I think promises are they way to go but I can't find the right combination and the documentation is way too complex for my skills. What's the best way to structure the code so that it's executed in the right order?

    Read the article

  • Progress dialog getting dismissed before the thread gets finished - Android

    - by user264953
    Hi experts, I use the code provided by Fedor in the following link, in order to get the latitude and longitude from my simple demo app. I am trying to fetch the latitude and longitude using the MyLocation class provided by him in that link. What is the simplest and most robust way to get the user's current location in Android? I try to fetch the latitude and longitude on a button click. On the button click, I start an async task and delegate the location fetching work to the do in background method of my asynctask. pre execute - progressdialog initiated. post execute - progress dialog dismissed. This is how, the progress dialog in my code should work and here is the issue which I have. THe progress dialog gets initiated correctly, but even before the latitude and longitude gets printed in the doinbackground method, the progress dialog gets dismissed. I do not understand why this happens. Here is my front end activity public class LocationServices extends Activity { MyLocation myLocation = new MyLocation(); LocationResult locationResult; TextView tv1, tv2; Location location; @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.main); tv1 = (TextView) findViewById(R.id.tv1); tv2 = (TextView) findViewById(R.id.tv2); Button btn = (Button) findViewById(R.id.Button01); btn.setOnClickListener(new OnClickListener() { @Override public void onClick(View v) { new LocationAsyncTasking().execute(); } }); } public class LocationAsyncTasking extends AsyncTask<String, Void, Void> { ProgressDialog dialog; int totalAvail; protected void onPreExecute() { // this.dialog.setMessage("Inserting data..."); dialog = new ProgressDialog(LocationServices.this); this.dialog.setMessage("Fetching data..."); this.dialog.show(); } protected Void doInBackground(String... args) { Looper.prepare(); locationResult = new LocationResult() { public void gotLocation(Location location) { // TODO Auto-generated method stub // LocationServices.this.location = location; System.out.println("Progress dialog should be present now - latitude"+location.getLatitude()); System.out.println("Progress dialog should be present now - longitude"+location.getLongitude()); } }; myLocation.getLocation(LocationServices.this, locationResult); return (null); } protected void onProgressUpdate(Integer... progress) { } protected void onPostExecute(Void unused) { dialog.dismiss(); } } } I am quite puzzled, thinking of what makes this progress dialog disappear even before the SOP in doinbackground is finished. Experts, please help me understand and resolve this issue. Any help in this regard is well appreciated. Looking forward, Best Regards, Rony

    Read the article

  • I'm searching for a messaging platform (like XMPP) that allows tight integration with a web applicat

    - by loxs
    Hi, At the company I work for, we are building a cluster of web applications for collaboration. Things like accounting, billing, CRM etc. We are using a RESTfull technique: For database we use CouchDB Different applications communicate with one another and with the database via http. Besides, we have a single sign on solution, so that when you login in one application, you are automatically logged to the other. For all apps we use Python (Pylons). Now we need to add instant messaging to the stack. We need to support both web and desktop clients. But just being able to chat is not enough. We need to be able to achieve all of the following (and more similar things). When somebody gets assigned to a task, they must receive a message. I guess this is possible with some system daemon. There must be an option to automatically group people in groups by lots of different properties. For example, there must be groups divided both by geographical location, by company division, by job type (all the programers from different cities and different company divisions must form a group), so that one can send mass messages to a group of choice. Rooms should be automatically created and destroyed. For example when several people visit the same invoice, a room for them must be automatically created (and they must auto-join). And when all leave the invoice, the room must be destroyed. Authentication and authorization from our applications. I can implement this using custom solutions like hookbox http://hookbox.org/docs/intro.html but then I'll have lots of problems in supporting desktop clients. I have no former experience with instant messaging. I've been reading about this lately. I've been looking mostly at things like ejabberd. But it has been a hard time and I can't find whether what I want is possible at all. So I'd be happy if people with experience in this field could help me with some advice, articles, tales of what is possible etc.

    Read the article

  • Efficient algorithm to distribute work?

    - by Zwei Steinen
    It's a bit complicated to explain but here we go. We have problems like this (code is pseudo-code, and is only for illustrating the problem. Sorry it's in java. If you don't understand, I'd be glad to explain.). class Problem { final Set<Integer> allSectionIds = { 1,2,4,6,7,8,10 }; final Data data = //Some data } And a subproblem is: class SubProblem { final Set<Integer> targetedSectionIds; final Data data; SubProblem(Set<Integer> targetedSectionsIds, Data data){ this.targetedSectionIds = targetedSectionIds; this.data = data; } } Work will look like this, then. class Work implements Runnable { final Set<Section> subSections; final Data data; final Result result; Work(Set<Section> subSections, Data data) { this.sections = SubSections; this.data = data; } @Override public void run(){ for(Section section : subSections){ result.addUp(compute(data, section)); } } } Now we have instances of 'Worker', that have their own state sections I have. class Worker implements ExecutorService { final Map<Integer,Section> sectionsIHave; { sectionsIHave = {1:section1, 5:section5, 8:section8 }; } final ExecutorService executor = //some executor. @Override public void execute(SubProblem problem){ Set<Section> sectionsNeeded = fetchSections(problem.targetedSectionIds); super.execute(new Work(sectionsNeeded, problem.data); } } phew. So, we have a lot of Problems and Workers are constantly asking for more SubProblems. My task is to break up Problems into SubProblem and give it to them. The difficulty is however, that I have to later collect all the results for the SubProblems and merge (reduce) them into a Result for the whole Problem. This is however, costly, so I want to give the workers "chunks" that are as big as possible (has as many targetedSections as possible). It doesn't have to be perfect (mathematically as efficient as possible or something). I mean, I guess that it is impossible to have a perfect solution, because you can't predict how long each computation will take, etc.. But is there a good heuristic solution for this? Or maybe some resources I can read up before I go into designing? Any advice is highly appreciated!

    Read the article

  • Counting point size based on chart area during zooming/unzoomin

    - by Gacek
    Hi folks. I heave a quite simple task. I know (I suppose) it should be easy, but from the reasons I cannot understand, I try to solve it since 2 days and I don't know where I'm making the mistake. So, the problem is as follows: - we have a chart with some points - The chart starts with some known area and points have known size - we would like to "emulate" the zooming effect. So when we zoom to some part of the chart, the size of points is getting proportionally bigger. In other words, the smaller part of the chart we select, the bigger the point should get. So, we have something like that. We know this two parameters: initialArea; // Initial area - area of the whole chart, counted as width*height initialSize; // initial size of the points Now lets assume we are handling some kind of OnZoom event. We selected some part of the chart and would like to count the current size of the points float CountSizeOnZoom() { float currentArea = CountArea(...); // the area is counted for us. float currentSize = initialSize * initialArea / currentArea; return currentSize; } And it works. But the rate of change is too fast. In other words, the points are getting really big too soon. So I would like the currentSize to be invertly proportional to currentArea, but with some scaling coefficient. So I created the second function: float CountSizeOnZoom() { float currentArea = CountArea(...); % the area is counted for us. // Lets assume we want the size of points to change ten times slower, than area of the chart changed. float currentSize = initialSize + 0.1f* initialSize * ((initialArea / currentArea) -1); return currentSize; } Lets do some calculations in mind. if currentArea is smaller than initialArea, initialArea/currentArea > 1 and then we add "something" small and postive to initialSize. Checked, it works. Lets check what happens if we would un-zoom. currentArea will be equal to initialArea, so we would have 0 at the right side (1-1), so new size should be equal to initialSize. Right? Yeah. So lets check it... and it doesn't work. My question is: where is the mistake? Or maybe you have any ideas how to count this scaled size depending on current area in some other way?

    Read the article

  • Blit Queue Optimization Algorithm

    - by martona
    I'm looking to implement a module that manages a blit queue. There's a single surface, and portions of this surface (bounded by rectangles) are copied to elsewhere within the surface: add_blt(rect src, point dst); There can be any number of operations posted, in order, to the queue. Eventually the user of the queue will stop posting blits, and ask for an optimal set of operations to actually perform on the surface. The task of the module is to ensure that no pixel is copied unnecessarily. This gets tricky because of overlaps of course. A blit could re-blit a previously copied pixel. Ideally blit operations would be subdivided in the optimization phase in such a way that every block goes to its final place with a single operation. It's tricky but not impossible to put this together. I'm just trying to not reinvent the wheel. I looked around on the 'net, and the only thing I found was the SDL_BlitPool Library which assumes that the source surface differs from the destination. It also does a lot of grunt work, seemingly unnecessarily: regions and similar building blocks are a given. I'm looking for something higher-level. Of course, I'm not going to look a gift horse in the mouth, and I also don't mind doing actual work... If someone can come forward with a basic idea that makes this problem seem less complex than it does right now, that'd be awesome too. EDIT: Thinking about aaronasterling's answer... could this work? Implement customized region handler code that can maintain metadata for every rectangle it contains. When the region handler splits up a rectangle, it will automatically associate the metadata of this rectangle with the resulting sub-rectangles. When the optimization run starts, create an empty region handled by the above customized code, call this the master region Iterate through the blt queue, and for every entry: Let srcrect be the source rectangle for the blt beng examined Get the intersection of srcrect and master region into temp region Remove temp region from master region, so master region no longer covers temp region Promote srcrect to a region (srcrgn) and subtract temp region from it Offset temp region and srcrgn with the vector of the current blt: their union will cover the destination area of the current blt Add to master region all rects in temp region, retaining the original source metadata (step one of adding the current blt to the master region) Add to master region all rects in srcrgn, adding the source information for the current blt (step two of adding the current blt to the master region) Optimize master region by checking if adjacent sub-rectangles that are merge candidates have the same metadata. Two sub-rectangles are merge candidates if (r1.x1 == r2.x1 && r1.x2 == r2.x2) | (r1.y1 == r2.y1 && r1.y2 == r2.y2). If yes, combine them. Enumerate master region's sub-rectangles. Every rectangle returned is an optimized blt operation destination. The associated metadata is the blt operation`s source.

    Read the article

  • Cocos2d-iPhone: CCSprite positions differ between Retina & non-Retina Screens

    - by bobwaycott
    I have a fairly simple app built using cocos2d-iphone, but a strange positioning problem that I've been unable to resolve. The app uses sprite sheets, and there is a Retina and non-Retina sprite sheet within the app that use the exact same artwork (except for resolution, of course). There are other artwork within the app used for CCSprites that are both standard and -hd suffixed. Within the app, a group of sprites are created when the app starts. These initially created CCSprites always position identically (and correctly) on Retina & non-Retina screens. // In method called to setup sprites when app launches // Cache & setup app sprites [[CCSpriteFrameCache sharedSpriteFrameCache] addSpriteFramesWithFile: @"sprites.plist"]; sprites = [CCSpriteBatchNode batchNodeWithFile: @"sprites.png"]; hill = [CCSprite spriteWithSpriteFrameName: @"hill.png"]; hill.position = ccp( 160, 75 ); [sprites addChild: hill z: 1]; // ... [create more sprites in same fashion] // NOTE: All sprites created here have correct positioning on Retina & non-Retina screens When a user taps the screen a certain way, a method is called that creates another group of CCSprites (on- and off-screen), animating them all in. One of these sprites, hand, is always positioned identically (and correctly) on Retina & non-Retina screens. The others (a group of clouds) successfully create & animate, but their positions are correct only on Retina displays. On a non-Retina display, each cloud has incorrect starting positions (incorrect for x, y, or sometimes both), and their ending positions after animation are also wrong. I've included the responsible code below from the on-touch method that creates the new sprites and animates them in. Again, it works as expected on a Retina display, but incorrectly on non-Retina screens. The CCSprites used are created in the same way at app-start to setup all the initial sprites in the app, which always have correct positions. // Elsewhere, in a method called on touch // Create clouds cloud1 = [CCSprite spriteWithSpriteFrameName: @"cloud_1.png"]; cloud1.position = ccp(-150, 320); cloud1.scale = 1.2f; cloud2 = [CCSprite spriteWithSpriteFrameName: @"cloud_2.png"]; cloud2.position = ccp(-150, 335); cloud2.scale = 1.3f; cloud3 = [CCSprite spriteWithSpriteFrameName: @"cloud_4.png"]; cloud3.position = ccp(-150, 400); cloud4 = [CCSprite spriteWithSpriteFrameName: @"cloud_5.png"]; cloud4.position = ccp(-150, 420); cloud5 = [CCSprite spriteWithSpriteFrameName: @"cloud_3.png"]; cloud5.position = ccp(400, 350); cloud6 = [CCSprite spriteWithSpriteFrameName: @"cloud_1.png"]; cloud6.position = ccp(400, 335); cloud6.scale = 1.1f; cloud7 = [CCSprite spriteWithSpriteFrameName: @"cloud_2.png"]; cloud7.flipY = YES; cloud7.flipX = YES; cloud7.position = ccp(400, 380); // Create hand hand = [CCSprite spriteWithSpriteFrameName:@"hand.png"]; hand.position = ccp(160, 650); [sprites addChild: cloud1 z: 10]; [sprites addChild: cloud2 z: 9]; [sprites addChild: cloud3 z: 8]; [sprites addChild: cloud4 z: 7]; [sprites addChild: cloud5 z: 6]; [sprites addChild: cloud6 z: 10]; [sprites addChild: cloud7 z: 8]; [sprites addChild: hand z: 10]; // ACTION!! [cloud1 runAction:[CCMoveTo actionWithDuration: 1.0f position: ccp(70, 320)]]; [cloud2 runAction:[CCMoveTo actionWithDuration: 1.0f position: ccp(60, 335)]]; [cloud3 runAction:[CCMoveTo actionWithDuration: 1.0f position: ccp(100, 400)]]; [cloud4 runAction:[CCMoveTo actionWithDuration: 1.0f position: ccp(80, 420)]]; [cloud5 runAction:[CCMoveTo actionWithDuration: 1.0f position: ccp(250, 350)]]; [cloud6 runAction:[CCMoveTo actionWithDuration: 1.0f position: ccp(250, 335)]]; [cloud7 runAction:[CCMoveTo actionWithDuration: 1.0f position: ccp(270, 380)]]; [hand runAction: handIn]; It may be worth mentioning that I see this incorrect positioning behavior in the iOS Simulator when running the app and switching between the standard iPhone and iPhone (Retina) hardware options. I have not been able to verify this occurs or does not occur on an actual non-Retina iPhone because I do not have one. However, this is the only time I see this odd positioning behavior occur (the incorrect results obtained after user touch), and since I'm creating all sprites in exactly the same way (i.e., [CCSprite spriteWithSpriteFrameName:] and then setting position with cpp()), I would be especially grateful for any help in tracking down why this single group of sprites are always incorrect on non-Retina screens. Thank you.

    Read the article

  • How does your team work together in a remote setup?

    - by Carl Rosenberger
    Hi, we are a distributed team working on the object database db4o. The way we work: We try to program in pairs only. We use Skype and VNC or SharedView to connect and work together. In our online Tuesday meeting every week (usually about 1 hour) we talk about the tasks done last week we create new pairs for the next week with a random generator so knowledge and friendship distribute evenly we set the priority for any new tasks or bugs that have come in each team picks the tasks it likes to do from the highest prioritized ones. From Tuesday to Wednesday we estimate tasks. We have a unit of work we call "Ideal Developer Session" (IDS), maybe 2 or 3 hours of working together as a pair. It's not perfectly well defined (because we know estimation always is inaccurate) but from our past shared experience we have a common sense of what an IDS is. If we can't estimate a task because it feels too long for a week we break it down into estimatable smaller tasks. During a short meeting on Wednesday we commit to a workload we feel is well doable in a week. We commit to complete. If a team runs out of committed tasks during the week, it can pick new ones from the prioritized queue we have in Jira. When we started working this way, some of us found that remote pair programming takes a lot of energy because you are so focussed. If you pair program for more than 5 or 6 hours per day, you get drained. On the other hand working like this has turned out to be very efficient. The knowledge about our codebase is evenly distributed and we have really learnt lots from eachother. I would be very interested to hear about the experiences from other teams working in a similar way. Things like: How often do you meet? Have you tried different sprint lengths (one week, two week, longer) ? Which tools do you use? Which issue tracker do you use? What do you do about time zone differences? How does it work for you to integrate new people into the team? How many hours do you usually work per week? How does your management interact with the way you are working? Do you get put on a waterfall with hard deadlines? What's your unit of work? What is your normal velocity? (units of work done per week) Programming work should be fun and for us it usually is great fun. I would be happy about any new ideas how to make it even more fun and/or more efficient.

    Read the article

  • Loading datasets from datastore and merge into single dictionary. Resource problem.

    - by fredrik
    Hi, I have a productdatabase that contains products, parts and labels for each part based on langcodes. The problem I'm having and haven't got around is a huge amount of resource used to get the different datasets and merging them into a dict to suit my needs. The products in the database are based on a number of parts that is of a certain type (ie. color, size). And each part has a label for each language. I created 4 different models for this. Products, ProductParts, ProductPartTypes and ProductPartLabels. I've narrowed it down to about 10 lines of code that seams to generate the problem. As of currently I have 3 Products, 3 Types, 3 parts for each type, and 2 languages. And the request takes a wooping 5500ms to generate. for product in productData: productDict = {} typeDict = {} productDict['productName'] = product.name cache_key = 'productparts_%s' % (slugify(product.key())) partData = memcache.get(cache_key) if not partData: for type in typeData: typeDict[type.typeId] = { 'default' : '', 'optional' : [] } ## Start of problem lines ## for defaultPart in product.defaultPartsData: for label in labelsForLangCode: if label.key() in defaultPart.partLabelList: typeDict[defaultPart.type.typeId]['default'] = label.partLangLabel for optionalPart in product.optionalPartsData: for label in labelsForLangCode: if label.key() in optionalPart.partLabelList: typeDict[optionalPart.type.typeId]['optional'].append(label.partLangLabel) ## end problem lines ## memcache.add(cache_key, typeDict, 500) partData = memcache.get(cache_key) productDict['parts'] = partData productList.append(productDict) I guess the problem lies in the number of for loops is too many and have to iterate over the same data over and over again. labelForLangCode get all labels from ProductPartLabels that match the current langCode. All parts for a product is stored in a db.ListProperty(db.key). The same goes for all labels for a part. The reason I need the some what complex dict is that I want to display all data for a product with it's default parts and show a selector for the optional one. The defaultPartsData and optionaPartsData are properties in the Product Model that looks like this: @property def defaultPartsData(self): return ProductParts.gql('WHERE __key__ IN :key', key = self.defaultParts) @property def optionalPartsData(self): return ProductParts.gql('WHERE __key__ IN :key', key = self.optionalParts) When the completed dict is in the memcache it works smoothly, but isn't the memcache reset if the application goes in to hibernation? Also I would like to show the page for first time user(memcache empty) with out the enormous delay. Also as I said above, this is only a small amount of parts/product. What will the result be when it's 30 products with 100 parts. Is one solution to create a scheduled task to cache it in the memcache every hour? It this efficient? I know this is alot to take in, but I'm stuck. I've been at this for about 12 hours straight. And can't figure out a solution. ..fredrik

    Read the article

  • plane bombing problems- help

    - by peiska
    I'm training code problems, and on this one I am having problems to solve it, can you give me some tips how to solve it please. The problem is something like this: Your task is to find the sequence of points on the map that the bomber is expected to travel such that it hits all vital links. A link from A to B is vital when its absence isolates completely A from B. In other words, the only way to go from A to B (or vice versa) is via that link. Notice that if we destroy for example link (d,e), it becomes impossible to go from d to e,m,l or n in any way. A vital link can be hit at any point that lies in its segment (e.g. a hit close to d is as valid as a hit close to e). Of course, only one hit is enough to neutralize a vital link. Moreover, each bomb affects an exact circle of radius R, i.e., every segment that intersects that circle is considered hit. Due to enemy counter-attack, the plane may have to retreat at any moment, so the plane should follow, at each moment, to the closest vital link possible, even if in the end the total distance grows larger. Given all coordinates (the initial position of the plane and the nodes in the map) and the range R, you have to determine the sequence of positions in which the plane has to drop bombs. This sequence should start (takeoff) and finish (landing) at the initial position. Except for the start and finish, all the other positions have to fall exactly in a segment of the map (i.e. it should correspond to a point in a non-hit vital link segment). The coordinate system used will be UTM (Universal Transverse Mercator) northing and easting, which basically corresponds to a Euclidian perspective of the world (X=Easting; Y=Northing). Input Each input file will start with three floating point numbers indicating the X0 and Y0 coordinates of the airport and the range R. The second line contains an integer, N, indicating the number of nodes in the road network graph. Then, the next N (<10000) lines will each contain a pair of floating point numbers indicating the Xi and Yi coordinates (1 No two links will ever cross with each other. Output The program will print the sequence of coordinates (pairs of floating point numbers with exactly one decimal place), each one at a line, in the order that the plane should visit (starting and ending in the airport). Sample input 1 102.3 553.9 0.2 14 342.2 832.5 596.2 638.5 479.7 991.3 720.4 874.8 744.3 1284.1 1294.6 924.2 1467.5 659.6 1802.6 659.6 1686.2 860.7 1548.6 1111.2 1834.4 1054.8 564.4 1442.8 850.1 1460.5 1294.6 1485.1 17 1 2 1 3 2 4 3 4 4 5 4 6 6 7 7 8 8 9 8 10 9 10 10 11 6 11 5 12 5 13 12 13 13 14 Sample output 1 102.3 553.9 720.4 874.8 850.1 1460.5 102.3 553.9

    Read the article

  • Why did File::Find finish short of completely traversing a large directory?

    - by Stan
    A directory exists with a total of 2,153,425 items (according to Windows folder Properties). It contains .jpg and .gif image files located within a few subdirectories. The task was to move the images into a different location while querying each file's name to retrieve some relevant info and store it elsewhere. The script that used File::Find finished at 20462 files. Out of curiosity I wrote a tiny recursive function to count the items which returned a count of 1,734,802. I suppose the difference can be accounted for by the fact that it didn't count folders, only files that passed the -f test. The problem itself can be solved differently by querying for file names first instead of traversing the directory. I'm just wondering what could've caused File::Find to finish at a small fraction of all files. The data is stored on an NTFS file system. Here is the meat of the script; I don't think including DBI stuff would be relevant since I reran the script with nothing but a counter in process_img() which returned the same number. find(\&process_img, $path_from); sub process_img { eval { return if ($_ eq "." or $_ eq ".."); ## Omitted querying and composing new paths for brevity. make_path("$path_to\\img\\$dir_area\\$dir_address\\$type"); copy($File::Find::name, "$path_to\\img\\$dir_area\\$dir_address\\$type\\$new_name"); }; if ($@) { print STDERR "eval barks: $@\n"; return } } And here is another method I used to count files: count_images($path_from); sub count_images { my $path = shift; opendir my $images, $path or die "died opening $path"; while (my $item = readdir $images) { next if $item eq '.' or $item eq '..'; $img_counter++ && next if -f "$path/$item"; count_images("$path/$item") if -d "$path/$item"; } closedir $images or die "died closing $path"; } print $img_counter;

    Read the article

  • How Do you Declare a Dependancy Property in VB.Net 3.0

    - by discwiz
    My company is stuck on .Net 3.0. The task I am trying to tackle is simple, I need to bind the IsChecked property of the CheckBoxResolvesCEDAR to the CompletesCEDARWork in my Audio class. The more I read about this it appears that I have to declare CompletesCEDARWork as dependancy propert, but I can not find a good example of how this is done. I found this example, but when I pasted into my code I get an "is not defined" error for GetValue and I have not successfully figure out what MyCode is supposed to represent. Any help/examples would be greatly appreciated. Thanks Public Shared ReadOnly IsSpinningProperty As DependencyProperty = DependencyProperty.Register("IsSpinning", GetType(Boolean), GetType(MyCode)) Public Property IsSpinning() As Boolean Get Return CBool(GetValue(IsSpinningProperty)) End Get Set(ByVal value As Boolean) SetValue(IsSpinningProperty, value) End Set End Property Here is my slimed down Audio Class as it stands now. Imports System.Xml Imports System Imports System.IO Imports System.Collections.ObjectModel Imports System.ComponentModel Public Class Audio Private mXMLString As String Private mTarpID As Integer Private mStartTime As Date Private mEndTime As Date Private mAudioArray As Byte() Private mFileXMLInfo As IO.FileInfo Private mFileXMLStream As IO.FileStream Private mFileAudioInfo As IO.FileInfo Private mDisplayText As String Private mCompletesCEDARWork As Boolean Private Property CompletesCEDARWork() As Boolean Get Return mCompletesCEDARWork End Get Set(ByVal value As Boolean) mCompletesCEDARWork = value End Set End Property And here is my XML Datatemplate where I set the binding. <DataTemplate x:Key="UploadLayout" DataType="Audio"> <Border BorderBrush="LightGray" CornerRadius="8" BorderThickness="1" Padding="10" Margin="0,3,0,0"> <StackPanel Orientation="Vertical"> <TextBlock Text="{Binding Path=DisplayText}"> </TextBlock> <StackPanel Orientation="Horizontal" VerticalAlignment="Center"> <TextBlock Text="TARP ID" VerticalAlignment="Center"/> <ComboBox x:Name="ListBoxTarpIDs" ItemsSource="{Binding Path=TarpIds}" SelectedValue="{Binding Path=TarpID}" BorderBrush="Transparent" Background="Transparent" > </ComboBox> </StackPanel> <CheckBox x:Name="CheckBoxResolvesCEDAR" Content="Resolves CEDAR Work" IsChecked="{Binding ElementName=Audio,Path=CompletesCEDARWork,Mode=TwoWay}"/> </StackPanel> </Border> </DataTemplate>

    Read the article

  • How to prevent mvn jetty:run from executing test phase?

    - by tputkonen
    We use MySQL in production, and Derby for unit tests. Our pom.xml copies Derby version of persistence.xml before tests, and replaces it with the MySQL version in prepare-package phase: <plugin> <artifactId>maven-antrun-plugin</artifactId> <version>1.3</version> <executions> <execution> <id>copy-test-persistence</id> <phase>process-test-resources</phase> <configuration> <tasks> <!--replace the "proper" persistence.xml with the "test" version--> <copy file="${project.build.testOutputDirectory}/META-INF/persistence.xml.test" tofile="${project.build.outputDirectory}/META-INF/persistence.xml" overwrite="true" verbose="true" failonerror="true" /> </tasks> </configuration> <goals> <goal>run</goal> </goals> </execution> <execution> <id>restore-persistence</id> <phase>prepare-package</phase> <configuration> <tasks> <!--restore the "proper" persistence.xml--> <copy file="${project.build.outputDirectory}/META-INF/persistence.xml.production" tofile="${project.build.outputDirectory}/META-INF/persistence.xml" overwrite="true" verbose="true" failonerror="true" /> </tasks> </configuration> <goals> <goal>run</goal> </goals> </execution> </executions> </plugin> The problem is, that if I execute mvn jetty:run it will execute the test persistence.xml file copy task before starting jetty. I want it to be run using the deployment version. How can I fix this?

    Read the article

  • Simple Form validation failing Backbone

    - by Corey Buchillon
    Im not exactly adept at coding so Im probably missing something, but my view here is failing to refuse submission when one or both of the fields are empty. I have a feeling something isnt connected right to my template for the row and the view of the form Form = Backbone.View.extend({ //form vie el: '.item-form', initialize: function(){ }, events: { 'click #additem': 'addModel' }, addModel: function(itemName, price){ // simple validation before adding to collection if (itemName !="" && price !="" ){ var item = new Item({ itemName: this.$("#item").val(), price: this.$("#price").val()}); items.add(item); $("#message").html("Please wait; the task is being added."); item.save(null, {success: function (item, response,options) { item.id= item.attributes._id.$id; item.attributes.id = item.attributes._id.$id; new ItemsView({collection: items}); $("#message").html(""); } }); this.$("#item").val(''); this.$("#price").val(''); } else { alert('Please fill in both fields'); } } }); and HTML <table class="itemTable"> <thead> <tr> <th>Item</th> <th>Price</th> <th></th> </tr> </thead> <tbody class="tableBody"> <script type="text/template" id="table-row"> <td><%= itemName %></td> <td><%= price %></td> <td><button class="complete">Complete</button> <button class="remove">Remove</button></td> </script> </tbody> </table> <form class="item-form"> <input type="text" name="item" id="item" placeholder="Item"/> <!-- goes to itemName in the template for the body --> <input type="text" name="price" id="price" placeholder="Price" /><!--goes to price in the template for the body --> <button type="button" id="additem">Add</button> </form> <div id="message"></div>

    Read the article

  • C++ Vector vs Array (Time)

    - by vsha041
    I have got here two programs with me, both are doing exactly the same task. They are just setting an boolean array / vector to the value true. The program using vector takes 27 seconds to run whereas the program involving array with 5 times greater size takes less than 1 s. I would like to know the exact reason as to why there is such a major difference ? Are vectors really that inefficient ? Program using vectors #include <iostream> #include <vector> #include <ctime> using namespace std; int main(){ const int size = 2000; time_t start, end; time(&start); vector<bool> v(size); for(int i = 0; i < size; i++){ for(int j = 0; j < size; j++){ v[i] = true; } } time(&end); cout<<difftime(end, start)<<" seconds."<<endl; } Runtime - 27 seconds Program using Array #include <iostream> #include <ctime> using namespace std; int main(){ const int size = 10000; // 5 times more size time_t start, end; time(&start); bool v[size]; for(int i = 0; i < size; i++){ for(int j = 0; j < size; j++){ v[i] = true; } } time(&end); cout<<difftime(end, start)<<" seconds."<<endl; } Runtime - < 1 seconds Platform - Visual Studio 2008 OS - Windows Vista 32 bit SP 1 Processor Intel(R) Pentium(R) Dual CPU T2370 @ 1.73GHz Memory (RAM) 1.00 GB Thanks Amare

    Read the article

  • MooTools request fails

    - by acoder
    Hi everyone, I am trying to achieve this task using MooTools. Description: I have three buttons. Two buttons outside myDiv and one button inside myDiv. A click on any of these buttons initiates an AJAX request (passing button variable to "button.php") and updates myDiv content based on the response text. So, after update, myDiv shows Button3 link + a message showing which button has been clicked. The problem: Everything seems to work fine but after several clicks, it happens that myDiv shows loader.gif image and stops. After this, if I wait a few moments, the browser sometimes stops working (gets blocked). I noticed this problem with IE6. Does anyone know what does this problem mean and how it can be avoided? index.html <html> <head> <script type="text/javascript" src="mootools/mootools-1.2.4-core-nc.js"></script> <script type="text/javascript" src="mootools/mootools-1.2.4.4-more.js"></script> <script type="text/javascript"> window.addEvent('domready', function() { $("myPage").addEvent("click:relay(a)", function(e) { e.stop(); var myRequest = new Request({ method: 'post', url: 'button.php', data: { button : this.get('id'), test : 'test' }, onRequest: function() { $('myDiv').innerHTML = '<img src="images/loader.gif" />'; }, onComplete: function(response) { $('myDiv').innerHTML = response; } }); myRequest.send(); }); }); </script> </head> <body> <div id="myPage"> <a href="#" id="button1">Button1</a> <a href="#" id="button2">Button2</a> <div id="myDiv"> <a href="#" id="button3">Button3</a> </div> </div> </body> </html> button.php <a href="#" id="button3"Button3</a> <br><br> <?php echo 'You clicked ['.$_REQUEST['button'].']'; ?>

    Read the article

  • Closing a process that open in code

    - by AmirHossein
    I create a WordTemplate with some placeholders for field,in code I insert value in this placeholders and show it to user. protected void Button1_Click(object sender, EventArgs e) { string DocFilePath = ""; //string FilePath = System.Windows.Forms.Application.StartupPath; object fileName = @"[...]\asset\word templates\FormatPeygiri1.dot"; DocFilePath = fileName.ToString(); FileInfo fi = new FileInfo(DocFilePath); if (fi.Exists) { object readOnly = false; object isVisible = true; object PaperNO = "PaperNO"; object PaperDate = "PaperDate"; object Peyvast = "Peyvast"; object To = "To"; object ShoName = "ShoName"; object DateName = "DateName"; Microsoft.Office.Interop.Word.Document aDoc = WordApp.Documents.Open(ref fileName, ref missing, ref readOnly, ref missing, ref missing, ref missing, ref missing, ref missing, ref missing, ref missing, ref missing, ref isVisible, ref isVisible, ref missing, ref missing, ref missing); WordApp.ActiveDocument.FormFields.get_Item(ref PaperNO).Result = TextBox_PaperNO.Text; string strPaperDate = string.Format("{0}/{1}/{2}", PersianDateTimeHelper.GetPersainDay(DateTimePicker_PaperDate.SelectedDate), PersianDateTimeHelper.GetPersainMonth(DateTimePicker_PaperDate.SelectedDate), PersianDateTimeHelper.GetPersainYear(DateTimePicker_PaperDate.SelectedDate)); WordApp.ActiveDocument.FormFields.get_Item(ref PaperDate).Result = strPaperDate; WordApp.ActiveDocument.FormFields.get_Item(ref Peyvast).Result = TextBox_Peyvast.Text; WordApp.ActiveDocument.FormFields.get_Item(ref To).Result = TextBox_To.Text; ; WordApp.ActiveDocument.FormFields.get_Item(ref ShoName).Result = TextBox_ShoName.Text; string strDateName = string.Format("{0}/{1}/{2}", PersianDateTimeHelper.GetPersainDay(DateTimePicker_DateName.SelectedDate), PersianDateTimeHelper.GetPersainMonth(DateTimePicker_DateName.SelectedDate), PersianDateTimeHelper.GetPersainYear(DateTimePicker_DateName.SelectedDate)); WordApp.ActiveDocument.FormFields.get_Item(ref DateName).Result = strDateName; aDoc.Activate(); WordApp.Visible = true; aDoc = null; WordApp = null; } else { MessageBox1.Show("File Not Exist!"); } it work good and successfully! but when a user close the Word,her Process not closed and exists in Task Manager Process list. this process name is WINWORD.exe I know that I can close process whit code [process.Kill()] but I don't know which process that I should to kill. if I want to kill all process with name [WINWORD.exe] all Word window closed.but I want to close specific Word window and kill process that I opened. How to do it?

    Read the article

< Previous Page | 390 391 392 393 394 395 396 397 398 399 400 401  | Next Page >