Search Results

Search found 15605 results on 625 pages for 'exchange cached mode'.

Page 395/625 | < Previous Page | 391 392 393 394 395 396 397 398 399 400 401 402  | Next Page >

  • Tiny linux box with 2xGbLAN, WLAN and 10MB/s AES throughput?

    - by Nakedible
    I'd like to find a small linux box with the following specifications: Small (mini-ITX size is OK) Fanless Runs Debian At least two gigabit network interfaces WLAN that supports "host ap" with hostapd + mac80211 in AP mode Can encrypt AES at least 10 megabytes per second Total cost $300 or less Solutions from multiple parts also accepted - I can buy an external network card etc. and build the box myself if the components are available. If you don't know about the "host ap" thing, just suggest your solution, I'll find out if I can get that resolved. If I can't get all that, I can possibly skip the "runs Debian" part, and I can definitely skip the hostapd part if the box can be a wireless access point with multiple ESSIDs out of the box. Something like Asus RT-N16 is close - doesn't run Debian easily, and probably doesn't encrypt AES fast enough. Something like Zotac ZBOX HD-ID11 is also close - no idea which WLAN card it has and it lacks second gigabit interface, but otherwise nice.

    Read the article

  • Dell U271 monitor DisplayPort suddenly not working

    - by Amir Latif
    My new(ish) Dell U271 took a bit of a knock and it now suddenly doesn't recognise the Macbook plugged into it via DisplayPort - this had been working great for several months up until now. When I "Scan Sources", it doesn't find anything on DisplayPort. However, one suspicious behaviour leads me to think all might not be lost. When the Mac is woken from sleep, this used to kick the monitor in (as an monitor would) and while it no longer does that, the light on the monitor does go from standby orange to blue briefly, then the monitor says it's going into "power save" mode. It seems like it gets some kinda signal. Any ideas on how I can diagnose the problem? I'm trying to find another mac but no one near me has one ...

    Read the article

  • How to install the TRIM RAID update for the Intel storage controller?

    - by Mike Pateras
    I just found this article, that says that Intel now supports TRIM for SSDs when the Intel storage controller is in RAID mode. It links to this download page. I'm pretty excited about that, but I'm a little confused. There seem to be two sets of drivers, an executable and something that's bootable. I ran the executable. Is that just to apply the drivers to my system now, and are the bootable drivers so that if I re-format, I won't have to re-run everything? Do I need to do both? And is there a way to check if it worked? I'm running an i7 in Windows 7 (ASUS P6T Deluxe Motherboard) with RAID 0, if that's significant.

    Read the article

  • How do I share a complete XP disk so it can be seen from a Windows 7 system?

    - by Ian Ringrose
    This should be easier! (both computers can see the internet etc so I know the network it’s self is working) I have a normal home network with a Windows XP machine on it and the new Windows 7 (64 bit) machine. So I can transfer the files to the new Windows 7 machine, I wish to share the complete disk (and all files) from the Windows XP machine and access them from the Windows 7 machine. Is there a step by step set of instructions for doing this anywhere? So fare I have: put both computers into the same workgroup put the windows 7 machine into work network mode so it can see the XP machine in the work group shared the XP disk as read only But when I try to access a lot of the folders on the XP disks, I am told I am not allowed to access them. (I was not asked for any passwords by the windows 7 machine when I accessed the XP machine. The XP machine just has its default account with no password set on it)

    Read the article

  • Can I run AD commands from a standard PowerShell script?

    - by Ben
    I am putting together a script to run post-sysprep. It should check if the machine is on the network, and if it is then it should query AD to see if a computer account exists with it's service tag (we're using these as the hostnames of the machines.) If it does exist, it should delete the account and rejoin the machine to the domain. I have got the majority of the script running, but need to run the following: Remove-ADComputer -Identity $distinguishedName How can I run this from the "standard" powershell environment? I don't want to use the AD module. (By the way - I'm on a mixed mode 2000/03 domain as we are in the process of upgrading to 2008) I'm new to PowerShell so be gentle if I'm completely missing the point! Thanks, Ben

    Read the article

  • Hybrid drive not booting faster than a normal HD

    - by Nigel Trotter
    I have used Windows 7 to create an image of my existing standard 160GB HD and copied this image back to a bigger 500GB Seagate hybrid drive. After copying the image to the hybrid I had to resize the partition, which was fine but after rebooting a few times to "teach" the hybrid, I have no increase in boot speed. It still takes 20-25 seconds to close down and then over a minute to start up. Is this something to do with the way the image lays itself on the drive indiscriminately? Do I need to load the OS on the drive from scratch to get the benefits? My PC with an i5 processor, is using AHCI mode.

    Read the article

  • installing jdk1.7.0 on Ubuntu 11.04 machine

    - by Yogesh
    I am facing a problem while trying to install Java 7 on Ubuntu. The following are the steps that I performed for installing: I installed the setup file from the link given below: wget http://download.oracle.com/otn-pub/java/jdk/7u1-b08/jdk-7u1-linux-x64.tar.gz I have a file: jdk-7u1-linux-x64.tar.gz I Untared it: tar -xvf jdk-7u1-linux-x64.tar.gz sudo mv ./jdk1.7.0_01 /usr/lib/jvm/jdk1.7.0_01 sudo update-alternatives –config java Here it gave me the following output: There is only one alternative in link group java: /usr/lib/jvm/java-6-sun/jre/bin/java Nothing to configure. sudo update-alternatives --install /usr/bin/java java /usr/lib/jvm/jdk1.7.0_01/jre/bin/java 1(I entered 1 here.) sudo update-alternatives --config java java -version. It showed the following output java version "1.6.0_26" Java(TM) SE Runtime Environment (build 1.6.0_26-b03) Java HotSpot(TM) 64-Bit Server VM (build 20.1-b02, mixed mode) I am not sure if jdk1.7.0 is installed as its showing the version as 1.6.0_26.

    Read the article

  • Fujitsu Siemens V6535 laptop doesn't wake up - crash when going into standby?

    - by marc
    I'm having trouble with my laptop (Fujitsu Siemens model V6535). It runs Windows 7, and after I upgraded from Vista I've noticed something that makes me really angry. When my laptop goes into Standby, the power LED changes to red and starts blinking (standby mode). When I push the power button to wake it up it, the blinking LED changes to green but nothing else happens. Nothing on the display, no HDD sound. When I press the power button for a few seconds and then try turn it on again, it doesn't display anything. I have to unplug the charger, shut it off, and power it on again without the power cable. Then it starts working. A few days ago I upgraded the BIOS to the newest version, but it doesn't help. Does anyone have any idea what can be wrong?

    Read the article

  • Credentials work for SSMS but not (ODBC) LogParser script

    - by justSteve
    Via SSMS I'm able to connect and navigate the server/db in question. but trying to connect via a logparser script the same credentials fail. I'm trying to execute this from the same box on which the server's running. the username is owner/dbo of the db. The db has mixed mode authentication. [linebreaks for clarity] C:\TTS\tools\LogParserc:\tts\tools\logparser\logparser file:c:\tts\tools\logparser\errors2SQL.sql?source="C:\inetpub\logs\LogFiles\W3SVC8\u_ex100521.log" -i:IISW3C -o:SQL -createTable:ON -oConnString:"Driver={SQL Server Native Client 10.0};Server=servername\SQLEXPRESS;db=Tter;uid=logger2;pwd=foo" -stats:OFF Task aborted. Error connecting to ODBC Server SQL State: 28000 Native Error: 18456 Error Message: [Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed for user 'logger2'. C:\TTS\tools\LogParser

    Read the article

  • After repairing permissions, Mac OS X won't boot

    - by Power-coder
    This morning I ran the Repair Permissions command from inside the Disk Utility. Ever since then my MacBook wont move past the splash screen when booting. I've revolted in verbose mode and I see that it is trying to repair the disk but then terminates with 'Unable to repair the volume'. Since then I have tried running the Disk Repair from the Snow Leopard install DVD and it quits with the same error. Is there a way I can repair this thing without reformatting and installing over again? How does something so simple as a permissions repair make the system unbootable like this?

    Read the article

  • sound clipping in windows 7 64bit

    - by Sonic Soul
    something is up with 64 bit version of windows 7. i have 2 (good pro-sumer) sound cards which i've used in other version of windows 7 w/out problems, but now it is causing severe clipping (noise, sound having little gaps surrounded by static).. the cards i am using is echo mia, and native instruments audio kontrol 1. the audio kontrol 1 is a external card, and would work ok for a few hours after rebooting, and than it would go back into clipping mode, to the point where you tube videos would not play from trying to process sound and it stopping for extended periods of time. echo mia is performing better, but there is still some clipping and distortion. the machine i use is newly built, with i7 920 64 bit cpu, 6 gigs of ram and an outdated nvidia video card (geforece 7950 gx2)

    Read the article

  • Broadcom bluetooth driver for Windows 7 on MacBook Pro

    - by Sergiy Byelozyorov
    I have installed Windows 7 on MacBook Pro using BootCamp. Usually when turning my Bluetooth headset on and trying to pair it with Mac for the first time, Windows would fail to install drivers and open solution in Action Center, which suggests to download the driver from the Broadcom webpage. This worked before and drivers would install and work. However now, when I start driver installer, it would get stuck at "Detecting Bluetooth Device" stage. Below the steps there is also a warning with text, which says "Please plug in or turn ob your Bluetooth device". This is how the installer looks like when it's stuck: I have tried turning my headset on/off, bringing it into pairing mode, installing/uninstalling device to/from the Bluetooth Devices. None of these worked. Any ideas?

    Read the article

  • Using keyboard specific keyboard-layouts in OS X

    - by Patrick O'Doherty
    I use a Kinesis Advantage with my MacBook Pro. While I use the dvorak layout when using the MBP's built-in keyboard the Kinesis has its own internal dvorak mode which assumes the host computer is using QWERTY. Is it possible to have OS X change the keyboard layout depending on which keyboard is currently being used? As far as I am aware this is possible on linux systems with HAL support but I haven't been able to find any support docs for OSX that advertise this ability. Thanks!

    Read the article

  • SQL Server Installer Closes Silently Without Errors

    - by ashes999
    When I run the SQL Server 2008 R2 Express installer (32-bit or 64-bit), nothing happens. It will get to the screen where it asks me to accept the terms of license and send anonymous feedback; I check off both boxes and click Next, and it automatically starts installing the Support Files. And then the window disappears. I tried looking through the log files, but didn't see any errors. I've tried: x64 SQL Server R2 express x86 SQL Server R2 express X64 SQL Server R2 (full) X64 SQL Server Management Studio Of these, only management studio installed correctly; the two express editions failed silently, and the full version gave me different errors. I also tried running in Administrator mode (despite being logged in as an administrator user), but again, no difference.

    Read the article

  • DNS Resolution doesn't work after uninstalling Cisco VPN & Deterministic Network Enhancer in Win 7

    - by Craig M
    I just upgraded my home PC to Windows 7 Ultimate 32 bit. After trying various methods to get the Cisco VPN client to work, I gave up and decided to just run it in XP mode. The last steps I tried were in this article ( http://social.technet.microsoft.com/Forums/en-US/w7itproappcompat/thread/d880dfe5-7f44-4955-8620-2a9355d8ea8b/ ) After that, I uninstalled the Cisco client and rebooted. I uninstalled the Deterministic Network Enhancer and rebooted again. Both uninstalled successfully, but now I'm not able to resolve any DNS. The only way I can resolve DNS is to reinstall the DNE, reboot, and uninstall the DNE. Then I am able to resolve DNS lookups until I reboot again. Once it's rebooted, no more DNS. Any ideas?

    Read the article

  • No HDMI audio - Windows 8 - ASUS H81M-PLUS

    - by Paul Wright
    I have an issue with HDMI audio on Windows 8 using an ASUS H81M-PLUS motherboard (without an external GFX card). There are many forum posts advising you to go into playback devices and setting HDMI to be default - I have done this. To eliminate what works and what doesn't work: I have not been able to get sound from my HDTV using HDMI. I have used this HDMI cable with my PS3, so this cable should be fine. I am able to use the HDMI cable in extended mode, so that I have two monitors (including the TV), just no audio. This HDMI cable goes straight from the motherboard to the TV. Below I have included 'Device manager', and 'Playback Devices' (Sound). Device Manager Playback Devices, showing disabled and disconnected devices I am at a loss. I have uninstalled all drivers, and then rebooted and made windows look for the correct ones, made sure the HDMI device was default. Thanks, Paul

    Read the article

  • haproxy access list using path_dir having issues with firefox

    - by user11243
    I'm trying to route all requests containing a path directory of /socket.io/ to a separate port with HAProxy. Here is my config file: global maxconn 4096 # Total Max Connections. This is dependent on ulimit nbproc 2 defaults mode http frontend all 0.0.0.0:80 timeout client 86400000 default_backend web_servers acl is_stream path_dir socket.io use_backend stream_servers if is_stream backend web_servers balance roundrobin option forwardfor # This sets X-Forwarded-For timeout server 30000 timeout connect 4000 server web1 127.0.0.1:4000 weight 1 maxconn 1024 check backend stream_servers balance roundrobin option forwardfor # This sets X-Forwarded-For timeout queue 5000 timeout server 86400000 timeout connect 86400000 server stream1 127.0.0.1:5100 weight 1 maxconn 1024 check URL paths with a /socket.io/ get correctly directed to port 5100 in chrome and safari. However not for firefox. I'm running Haproxy locally on my mac for dev, not sure if it has anything to do with it. I'm using haproxy 1.4.8 and Firefox 3.6.15. I've tried clearing cache on firefox and it didn't help, so I'm thinking there's something wrong with the way HAProxy parses through the Firefox request headers.

    Read the article

  • strange behaviour - dhclient needs to be run twice in order to connect to wireless

    - by splicer
    I am trying to connect my to my wlan without the use of NetworkManager. I run the following commands after boot: iwconfig wlan0 enc <WEP passwd> mode managed essid <name> channel 6 ifconfig wlan0 up dhclient wlan0 At this point, dhclient stalls for ages (perhaps 2 minutes), then it returns with PING 192.168.1.254 (192.168.1.254) from 192.168.1.65 wlan0: 56(84) bytes of data. --- 192.168.1.254 ping statistics --- 3 packets transmitted, 0 received, +3 errors, 100% packet loss, time 3000ms pipe 3 .. The strange thing is that when I run pkill dhclient; dhclient wlan0 right after this, it connects in about <3 seconds. Any idea what could be the cause of this problem? Edit: oh, and I did try using the -timeout flag on dhclient but that didn't seem to make any difference (it still stalled for ages).

    Read the article

  • Kubuntu Monitor Out of Range

    - by uncleo
    My X server seems to be faulty, but I don't know why. I had some problems last week with a new motherboard, but they seemed to be resolved. Today, I updated Kubuntu and restarted, but my Viewsonic VX900 LCD monitor shows the splash screen for several seconds, then displays the message "Out of Range" I have tried various kernels in Grub, some in recovery mode, most do the same thing. No key combinations bring up a shell prompt like I expect. The one exception was a very old kernel, that would only mount the file system as read-only, so I can't fix up the xorg.conf file. Is there anything to be done?

    Read the article

  • Barcode scanner work in browser

    - by JP Hellemons
    I have a Manhattan Barcode scanner Contact CCD Handheld 80mm scan width, USB. I have connected it to Windows 7 x64. I managed to get it to scan several barcodes by configuring it to USB Mode. If I open up Notepad it scans and displays the barcodes correctly. But when I set the cursor in a textbox in my browser (IE9 beta, Firefox 3.6 or Chrome 8.0 beta), it scans correctly but opens the download dialog afterwards. This gets triggered by CTRL+J normally.... What did I do wrong? I tried several barcodes (Code128 and several others) and tried different browsers and Notepad. it works in Notepad but doesn't in the browsers...

    Read the article

  • Troubleshooting intermittantly long 'page loading' problem

    - by justSteve
    Working off IIS 7 with an asp.net mvc app. Most page accesses are lightening quick. Sometimes the browser reports 'page loading' for an exceptionally long time. We are still in the development/testing mode so it's not a network/bandwidth issue. Happens in both IE and FF. No explicit error conditions in the server logs. If i could reproduce it i could run firebug/fiddler to give more info. As it is, it's a little too infrequent to simply leave both those running hoping for the condition to fire - unless/until that's the only option to get better info. I have a hunch this is client-side jquery/ajax related but only a hunch - don't have enough background in either jQuery or MVC to really know what can go wrong. Any initial troubleshooting suggestions welcome. thx

    Read the article

  • Need help identiying a nasty rootkit in Windows

    - by goofrider
    I have a nasty rootkit that not tools seem to be able to idenity. I know for sure it's a rootkit, but I can figure out which rootkit it is. Here's what I gathered so far: It creates multiple copies of itself in %HOME%\Local Settings\Temp with names like Q.EXE, IAJARZ.exe, etc., and install them as hidden services. These EXE have SysInternals identifiers in them so they're definitely rootkits. It hooked very deep in the system, including file read/write, security policies, registry read/write, and possibly WinSock/TCP/IP. When going to Sophos.com to download their software, the rootkit inject something called Microsoft Ajax Tootkit into the page, which injects code into the email submission form in order to redirect it. (EDIT: I might have panicked. Looks like Sophos does use an AJAZ email form, their form is just broken on Chrome so it looked like a mail form injection attack, the link is http://www.sophos.com/en-us/products/free-tools/virus-removal-tool/download.aspx ) Super-Antispyware found a lot of spyware cookies, in the name of .kaspersky.2o7.net, etc. (just chedk 2o7.net, looks like it's a legit ad company) I tried comparing DNS lookup from the infected systems and from system in other physical locations, no DNS redirections it seems. I used dd to copy the MBR and compared it with the MBR provided by ms-sys package, no differences so it's not infecting MBR. No antivirus or rootkit scanner be able to identify it. Most of them can't even find it. I tried scanning, in-situ (normal mode), in safe mode, and boot to linux live CD. Scanners used: Avast, Sophos anti rootkit, Kasersky TDSSKiller, GMER, RootkitRevealer, and many others. Kaspersky reported some unsigned system files that ought to be signed (e.g. tcpip.sys), and reported a number of MD5 mismatches. But otherwise couldn't identify anything based on signature. When running Sysinternal RootkitRevealer and Sophos AntiRootkit, CPU usage goes up to 100% and gets stucked. The Rootkit is blocking them. When trying running/installing HiJackThis, RootkitRevealer and some other scanners, it tells me system security policy prevent running/installing it. The list of malicious acitivities go on and on. here's a sample of logs from all my scans. In particular, aswSnx.SYS, apnenfno.sys and PROCMON20.SYS has a huge number of hooks. It's hard to tell if the rootkit replaced legit program files like aswSnx.SYS (from Avast) and PROCMON20.SYS (from Sysinternal Process Monitor). I can't find whether apnenfno.sys is from a legit program. Help to identify it is appreciated. Trend Micro RootkitBuster ------ [HIDDEN_REGISTRY][Hidden Reg Value]: KeyPath : HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\sptd\Cfg Root : 586bfc0 SubKey : Cfg ValueName : g0 Data : 38 23 E8 D0 BF F2 2D 6F ... ValueType : 3 AccessType: 0 FullLength: 61 DataSize : 32 [HOOKED_SERVICE_API]: Service API : ZwCreateMutant Image Path : C:\WINDOWS\System32\Drivers\aswSnx.SYS OriginalHandler : 0x8061758e CurrentHandler : 0xaa66cce8 ServiceNumber : 0x2b ModuleName : aswSnx.SYS SDTType : 0x0 [HOOKED_SERVICE_API]: Service API : ZwCreateThread Image Path : c:\windows\system32\drivers\apnenfno.sys OriginalHandler : 0x805d1038 CurrentHandler : 0xaa5f118c ServiceNumber : 0x35 ModuleName : apnenfno.sys SDTType : 0x0 [HOOKED_SERVICE_API]: Service API : ZwDeleteKey Image Path : C:\WINDOWS\system32\Drivers\PROCMON20.SYS OriginalHandler : 0x80624472 CurrentHandler : 0xa709b0f8 ServiceNumber : 0x3f ModuleName : PROCMON20.SYS SDTType : 0x0 HiJackThis ------ O23 - Service: JWAHQAGZ - Sysinternals - www.sysinternals.com - C:\DOCUME~1\jeff\LOCALS~1\Temp\JWAHQAGZ.exe O23 - Service: LHIJ - Sysinternals - www.sysinternals.com - C:\DOCUME~1\jeff\LOCALS~1\Temp\LHIJ.exe Kaspersky TDSSKiller ------ 21:05:58.0375 3936 C:\WINDOWS\system32\ati2sgag.exe - copied to quarantine 21:05:59.0217 3936 ATI Smart ( UnsignedFile.Multi.Generic ) - User select action: Quarantine 21:05:59.0342 3936 C:\WINDOWS\system32\BUFADPT.SYS - copied to quarantine 21:05:59.0856 3936 BUFADPT ( UnsignedFile.Multi.Generic ) - User select action: Quarantine 21:05:59.0965 3936 C:\Program Files\CrashPlan\CrashPlanService.exe - copied to quarantine 21:06:00.0152 3936 CrashPlanService ( UnsignedFile.Multi.Generic ) - User select action: Quarantine 21:06:00.0246 3936 C:\WINDOWS\system32\epmntdrv.sys - copied to quarantine 21:06:00.0433 3936 epmntdrv ( UnsignedFile.Multi.Generic ) - User select action: Quarantine 21:06:00.0464 3936 C:\WINDOWS\system32\EuGdiDrv.sys - copied to quarantine 21:06:00.0526 3936 EuGdiDrv ( UnsignedFile.Multi.Generic ) - User select action: Quarantine 21:06:00.0604 3936 C:\Program Files\Common Files\Macrovision Shared\FLEXnet Publisher\FNPLicensingService.exe - copied to quarantine 21:06:01.0181 3936 FLEXnet Licensing Service ( UnsignedFile.Multi.Generic ) - User select action: Quarantine 21:06:01.0321 3936 C:\Program Files\AddinForUNCFAT\UNCFATDMS.exe - copied to quarantine 21:06:01.0430 3936 OTFSDMS ( UnsignedFile.Multi.Generic ) - User select action: Quarantine 21:06:01.0492 3936 C:\WINDOWS\system32\DRIVERS\tcpip.sys - copied to quarantine 21:06:01.0539 3936 Tcpip ( UnsignedFile.Multi.Generic ) - User select action: Quarantine 21:06:01.0601 3936 C:\DOCUME~1\jeff\LOCALS~1\Temp\TULPUWOX.exe - copied to quarantine 21:06:01.0664 3936 HKLM\SYSTEM\ControlSet003\services\TULPUWOX - will be deleted on reboot 21:06:01.0664 3936 C:\DOCUME~1\jeff\LOCALS~1\Temp\TULPUWOX.exe - will be deleted on reboot 21:06:01.0664 3936 TULPUWOX ( UnsignedFile.Multi.Generic ) - User select action: Delete 21:06:01.0757 3936 C:\WINDOWS\system32\Drivers\usbaapl.sys - copied to quarantine 21:06:01.0866 3936 USBAAPL ( UnsignedFile.Multi.Generic ) - User select action: Quarantine 21:06:01.0913 3936 C:\Program Files\VMware\VMware Player\vmware-authd.exe - copied to quarantine 21:06:02.0443 3936 VMAuthdService ( UnsignedFile.Multi.Generic ) - User select action: Quarantine 21:06:02.0443 3936 vmount2 ( UnsignedFile.Multi.Generic ) - skipped by user 21:06:02.0443 3936 vmount2 ( UnsignedFile.Multi.Generic ) - User select action: Skip 21:06:02.0459 3936 vstor2 ( UnsignedFile.Multi.Generic ) - skipped by user 21:06:02.0459 3936 vstor2 ( UnsignedFile.Multi.Generic ) - User select action: Skip

    Read the article

  • Windows xp problems

    - by anca
    I had problems with web virus cake 3.00 and I downloaded Malwarebytes Anti-WALWARE, I got rid of that virus but I did other problems. When I open my PC appears to skype error "exception in module Skype.exe at 0013CE7D.The EOleSysError RPC server is unavailable" and another one "Error in C: \ WINDOWS \ system32 \ Nvcpl.Dll Missing entry: NnStartup" when I install / uninstall a program says "Windows Installer service Could you not be accessed. This CAN occure if you are running Windows in safe mode, or if the Windows Installer is not corectly installes. Contact your support personnel for assistance. I have tried many "solutions" but nothing worked. Please HELP! It windows xp sp 2

    Read the article

  • Second video card (PCI) under Windows 7

    - by dbkk101
    I'm trying to get an old PCI video card (Diamond Stealth 2500) along with a normal PCI-E video card. In BIOS, there is a setting to switch between PEG/PCI or PCI/PEG on startup (PEG is PCI-E Graphics). When I use PCI/PEG only the old PCI card works, when I use the other one, only the new PEG card works. In PEG/PCI mode, Windows 7 recognizes the card and shows it in Device Manager as Standard VGA adapter, but it shows a warning for the device ("This device cannot start. (Code 10)").

    Read the article

  • IE8 complains about SSL name mistmatch

    - by Cerin
    When visiting an SSL protected website, IE8 complains about the certificate name not matching the website address, but gives no information about the certificate or what name it's looking for. Visiting the same site in IE9 (or IE9 in "IE8 mode"), Firefox, Chrome, and Safari shows no problems, and that the certificate matches the address. Certificate checkers indicate everything is installed and configured correctly. Does anyone know what might be causing this? Is this a known issue or bug in IE8? I've been Googling for similar issues, but due to the uncertainty as to what's actually going on, I'm not sure what to search for. My problem reads similar to this question. However, my server is running Apache2.

    Read the article

< Previous Page | 391 392 393 394 395 396 397 398 399 400 401 402  | Next Page >