Search Results

Search found 11070 results on 443 pages for 'bin deployment'.

Page 396/443 | < Previous Page | 392 393 394 395 396 397 398 399 400 401 402 403  | Next Page >

  • set a cookie while sending PERL HTTP::Request

    - by dexter
    i have created HTTP::Request which looks like this: #!/usr/bin/perl require HTTP::Request; require LWP::UserAgent; $request = HTTP::Request->new(GET => 'http://www.google.com/'); $ua = LWP::UserAgent->new; $ua->cookie_jar({file => "testcookies.txt",autosave =>1}); $response = $ua->request($request); if($response->is_success){ print "sucess\n"; print $response->code; } else { print "fail\n"; die $response->code; } now, When i send Request: $request = HTTP::Request->new(GET => 'http://www.google.com/'); $ua = LWP::UserAgent->new; $ua->cookie_jar({file => "testcookies.txt",autosave =>1}); i want to set a cookie which might look like.. $request = HTTP::Request->new(GET => 'http://www.google.com/'); $ua = LWP::UserAgent->new; $ua->new CGI::Cookie(-name=>"testCookie",-value=>"cookieValue"); $ua->cookie_jar({file => "testcookies.txt"}); gives error though. AND, want to log the http response codes in the file please help thank you

    Read the article

  • floating point equality in Python and in general

    - by eric.frederich
    I have a piece of code that behaves differently depending on whether I go through a dictionary to get conversion factors or whether I use them directly. The following piece of code will print 1.0 == 1.0 -> False But if you replace factors[units_from] with 10.0 and factors[units_to ] with 1.0 / 2.54 it will print 1.0 == 1.0 -> True #!/usr/bin/env python base = 'cm' factors = { 'cm' : 1.0, 'mm' : 10.0, 'm' : 0.01, 'km' : 1.0e-5, 'in' : 1.0 / 2.54, 'ft' : 1.0 / 2.54 / 12.0, 'yd' : 1.0 / 2.54 / 12.0 / 3.0, 'mile' : 1.0 / 2.54 / 12.0 / 5280, 'lightyear' : 1.0 / 2.54 / 12.0 / 5280 / 5.87849981e12, } # convert 25.4 mm to inches val = 25.4 units_from = 'mm' units_to = 'in' base_value = val / factors[units_from] ret = base_value * factors[units_to ] print ret, '==', 1.0, '->', ret == 1.0 Let me first say that I am pretty sure what is going on here. I have seen it before in C, just never in Python but since Python in implemented in C we're seeing it. I know that floating point numbers will change values going from a CPU register to cache and back. I know that comparing what should be two equal variables will return false if one of them was paged out while the other stayed resident in a register. Questions What is the best way to avoid problems like this?... In Python or in general. Am I doing something completely wrong? Side Note This is obviously part of a stripped down example but what I'm trying to do is come with with classes of length, volume, etc that can compare against other objects of the same class but with different units. Rhetorical Questions If this is a potentially dangerous problem since it makes programs behave in an undetermanistic matter, should compilers warn or error when they detect that you're checking equality of floats Should compilers support an option to replace all float equality checks with a 'close enough' function? Do compilers already do this and I just can't find the information.

    Read the article

  • How do I tell nant to only call csc when there are cs files in to compile?

    - by rob_g
    In my NAnt script I have a compile target that calls csc. Currently it fails because no inputs are specified: <target name="compile"> <csc target="library" output="${umbraco.bin.dir}\Mammoth.${project::get-name()}.dll"> <sources> <include name="project/*.cs" /> </sources> <references> </references> </csc> </target> How do I tell NAnt to not execute the csc task if there are no CS files? I read about the 'if' attribute but am unsure what expression to use with it, as ${file::exists('*.cs')} does not work. The build script is a template for Umbraco (a CMS) projects and may or may not ever have .cs source files in the project. Ideally I would like to not have developers need to remember to modify the NAnt script to include the compile task when .cs files are added to the project (or exclude it when all .cs files are removed).

    Read the article

  • 2D Histogram in R: Converting from Count to Frequency within a Column

    - by Jac
    Would appreciate help with generating a 2D histogram of frequencies, where frequencies are calculated within a column. My main issue: converting from counts to column based frequency. Here's my starting code: # expected packages library(ggplot2) library(plyr) # generate example data corresponding to expected data input x_data = sample(101:200,10000, replace = TRUE) y_data = sample(1:100,10000, replace = TRUE) my_set = data.frame(x_data,y_data) # define x and y interval cut points x_seq = seq(100,200,10) y_seq = seq(0,100,10) # label samples as belonging within x and y intervals my_set$x_interval = cut(my_set$x_data,x_seq) my_set$y_interval = cut(my_set$y_data,y_seq) # determine count for each x,y block xy_df = ddply(my_set, c("x_interval","y_interval"),"nrow") # still need to convert for use with dplyr # convert from count to frequency based on formula: freq = count/sum(count in given x interval) ################ TRYING TO FIGURE OUT ################# # plot results fig_count <- ggplot(xy_df, aes(x = x_interval, y = y_interval)) + geom_tile(aes(fill = nrow)) # count fig_freq <- ggplot(xy_df, aes(x = x_interval, y = y_interval)) + geom_tile(aes(fill = freq)) # frequency I would appreciate any help in how to calculate the frequency within a column. Thanks! jac EDIT: I think the solution will require the following steps 1) Calculate and store overall counts for each x-interval factor 2) Divide the individual bin count by its corresponding x-interval factor count to obtain frequency. Not sure how to carry this out though. .

    Read the article

  • Can't run install MySQL gem Fedora 14, even after installing mysql-devel, ruby-devel, and rubygems

    - by jonderry
    I'm trying to install the mysql gem via sudo gem install mysql --version 2.7 However, I get the following error: Building native extensions. This could take a while... ........... ERROR: Error installing mysql: ERROR: Failed to build gem native extension. /usr/bin/ruby extconf.rb checking for mysql_query() in -lmysqlclient... no checking for main() in -lm... yes checking for mysql_query() in -lmysqlclient... no checking for main() in -lz... yes checking for mysql_query() in -lmysqlclient... no checking for main() in -lsocket... no checking for mysql_query() in -lmysqlclient... no checking for main() in -lnsl... yes checking for mysql_query() in -lmysqlclient... no *** extconf.rb failed *** Could not create Makefile due to some reason, probably lack of necessary libraries and/or headers. Check the mkmf.log file for more details. You may need configuration options. Any ideas?

    Read the article

  • Swing GUI using JNI crashes

    - by Div
    Hi, A java swing application(GUI) using JNI code to communicate with native C code. The Swing application launches properly and works fine. The GUI is used to start some customized system level tests(io,memory,cpu) and show their progress. The tests have to be left running at-least overnight to get the results. But, the next morning, GUI crashes and throws following message. Any pointers on source of the issue will be greatly appreciated. Java version: java 1.5 / java 1.6 OS: Solaris 10. Thanks, Div =============MESSAGES================== # uname -a SunOS Generic_127127-11 sun4v sparc SUNW, # # # # An unexpected error has been detected by HotSpot Virtual Machine: # # SIGSEGV (0xb) at pc=0xff268924, pid=9473, tid=272 # # Java VM: Java HotSpot(TM) Server VM (1.5.0_14-b03 mixed mode) # Problematic frame: # C [libc.so.1+0x68924] strstr+0x20 # # An error report file with more information is saved as hs_err_pid9473.log # # If you would like to submit a bug report, please visit: # HotSpot Virtual Machine Error Reporting Page # ============================= Another machine: # A fatal error has been detected by the Java Runtime Environment: # # SIGSEGV (0xb) at pc=0xff231fd0, pid=1406, tid=180 # # JRE version: 6.0_18-b07 # Java VM: Java HotSpot(TM) Server VM (16.0-b13 mixed mode solaris-sparc ) # Problematic frame: # C [libc.so.1+0x31fd0] strcpy+0x70 # # An error report file with more information is saved as: # /usr/sunvts/bin/hs_err_pid1406.log #

    Read the article

  • Ruby : UTF-8 IO

    - by subtenante
    I use ruby 1.8.7. I try to parse some text files containing greek sentences, encoded in UTF-8. (I can't much paste here sample files, because they are subject to copyright. Really just some greek text encoded in UTF-8.) I want, for each file, to parse the file, extract all the words, and make a list of each new word found in this file. All that saved to one big index file. Here is my code : #!/usr/bin/ruby -KU def prepare_line(l) l.gsub(/^\s*[ST]\d+\s*:\s*|\s+$|\(\d+\)\s*/u, "") end def tokenize(l) l.split /['·.;!:\s]+/u end $dict = {} $cpt = 0 $out = File.new 'out.txt', 'w' def lesson(file) $cpt = $cpt + 1 file.readlines.each do |l| $out.puts l l = prepare_line l tokenize(l).each do |t| unless $dict[t] $dict[t] = $cpt $out.puts " #{t}\n" end end end end Dir.new('etc/').each do |filename| f = File.new("etc/#{filename}") unless File.directory? f lesson f end end Here is part of my output : ?@???†?†?????????? ?...[snip very long hangul/hanzi mishmash]... ????????†? ???N2 : ?e?te?? (2) µ???µa (Note that the puts l part seems to work fine, at the end of the given output line.) Any idea what is wrong with my code ? (General comments about ruby idioms I could use are very welcome, I'm really a beginner.)

    Read the article

  • Cocoa: Using UNIX based commands to write a file

    - by BryCry
    I'm looking for help with a program im making. I create a *.sh file as follows: SVN_StatGenAppDelegate.h: NSWindow *window; NSTask *touch; NSArray *touchArguments; NSString *svnURLStr; NSString *SVNStatStr; NSString *destDirStr; SVN_StatGenApplDelegate.m: NSString *locationStr = [NSString stringWithFormat:@"%@/exec.sh", destDirStr]; NSLog(@"%@", locationStr); touch = [[NSTask alloc] init]; [touch setLaunchPath:@"/usr/bin/touch"]; touchArguments = [NSArray arrayWithObjects:locationStr, nil]; [touch setArguments:touchArguments]; [touch launch]; This works, i get a file called exec.sh created in the location i craete with the destDirStr. Now is my next question, i need to get that file filled with the following: svn co http://repo.com/svn/test C:\users\twan\desktop\pres\_temp cd C:\users\twan\desktop\pres\_temp svn log -v --xml > logfile.log copy C:\users\twan\desktop\statsvn.jar C:\users\twan\desktop\pres\_temp cd .. java -jar _temp\statsvn.jar C:\users\twan\desktop\pres\_temp/logfile.log C:\users\twan\desktop\pres\_temp rmdir /s /Q _temp The actual idea is that this script is written into the sh file, and all the _temp and other locations are replaced by the vars i get from textfields etc. so c:\users\twan\desktop\pres_temp would be a var called tempDirStr that i get from my inputfields. (i know these cmomands and locations are windows based, im doing this with a friend and he made a .net counterpart of the application. Can you guys help me out?:D thanks in advance!

    Read the article

  • C++ Switch won't compile with externally defined variable used as case

    - by C Nielsen
    I'm writing C++ using the MinGW GNU compiler and the problem occurs when I try to use an externally defined integer variable as a case in a switch statement. I get the following compiler error: "case label does not reduce to an integer constant". Because I've defined the integer variable as extern I believe that it should compile, does anyone know what the problem may be? Below is an example: test.cpp #include <iostream> #include "x_def.h" int main() { std::cout << "Main Entered" << std::endl; switch(0) { case test_int: std::cout << "Case X" << std::endl; break; default: std::cout << "Case Default" << std::endl; break; } return 0; } x_def.h extern const int test_int; x_def.cpp const int test_int = 0; This code will compile correctly on Visual C++ 2008. Furthermore a Montanan friend of mine checked the ISO C++ standard and it appears that any const-integer expression should work. Is this possibly a compiler bug or have I missed something obvious? Here's my compiler version information: Reading specs from C:/MinGW/bin/../lib/gcc/mingw32/3.4.5/specs Configured with: ../gcc-3.4.5-20060117-3/configure --with-gcc --with-gnu-ld --with-gnu-as --host=mingw32 --target=mingw32 --prefix=/mingw --enable-threads --disable-nls --enable-languages=c,c++,f77,ada,objc,java --disable-win32-registry --disable-shared --enable-sjlj-exceptions --enable-libgcj --disable-java-awt --without-x --enable-java-gc=boehm --disable-libgcj-debug --enable-interpreter --enable-hash-synchronization --enable-libstdcxx-debug Thread model: win32 gcc version 3.4.5 (mingw-vista special r3)

    Read the article

  • Why doesn't Perl's Try::Tiny's try/catch give me the same results as eval?

    - by sid_com
    Why doesn't the subroutine with try/catch give me the same results as the eval-version does? #!/usr/bin/env perl use warnings; use strict; use 5.012; use Try::Tiny; sub shell_command_1 { my $command = shift; my $timeout_alarm = shift; my @array; eval { local $SIG{ALRM} = sub { die "timeout '$command'\n" }; alarm $timeout_alarm; @array = qx( $command ); alarm 0; }; die $@ if $@ && $@ ne "timeout '$command'\n"; warn $@ if $@ && $@ eq "timeout '$command'\n"; return @array; } shell_command_1( 'sleep 4', 3 ); say "Test_1"; sub shell_command_2 { my $command = shift; my $timeout_alarm = shift; my @array; try { local $SIG{ALRM} = sub { die "timeout '$command'\n" }; alarm $timeout_alarm; @array = qx( $command ); alarm 0; } catch { die $_ if $_ ne "timeout '$command'\n"; warn $_ if $_ eq "timeout '$command'\n"; } return @array; } shell_command_2( 'sleep 4', 3 ); say "Test_2"

    Read the article

  • How to emulate mod_rewrite in PHP

    - by Tyler Crompton
    I have a few URLs that I want to map to certain files via PHP. Currently, I am just using mod_rewrite in Apache. However, my application is getting too large for the rewriting to be done with regular expressions. So I created a file router.php that does the rewriting. I understand to do a redirect I could just send the Location: header. However, I don't always want to do a redirect. For example, I may want /api/item/ to map to the file /herp/derp.php relative to the document root. I need to preserve the HTTP method as well. "No problem," I thought. I made my .htaccess have the following snippet. RewriteEngine On RewriteRule ^api/item/$ /cgi-bin/router.php [L] And my router.php file looks as follows: <?php $uri = parse_url($_SERVER['REQUEST_URI']); $query = isset($uri['query']) ? $uri['query'] ? array(); // some code that modifies the query require_once "{$_SERVER['DOCUMENT_ROOT']}/herp/derp.php?" . http_build_query($query); ?> However, this doesn't work, because the OS is looking for a file named derp.php?some=query. How can I simulate a rewrite rule such as RewriteRule ^api/item/$ /herp/derp/ [L] in PHP. In other words, how do I tell the server to process a different URL than requested and preserve the query and HTTP method without causing a redirect? Note: Using variables set in router.php is less than desirable and is bad structure since it's only supposed to be responsible for handling URLs. I am open to using a light-weight third party solution.

    Read the article

  • How can I get this week's dates in Perl?

    - by ABach
    I have the following loop to calculate the dates of the current week and print them out. It works, but I am swimming in the amount of date/time possibilities in Perl and want to get your opinion on whether there is a better way. Here's the code I've written: #!/usr/bin/env perl use warnings; use strict; use DateTime; # Calculate numeric value of today and the # target day (Monday = 1, Sunday = 7); the # target, in this case, is Monday, since that's # when I want the week to start my $today_dt = DateTime->now; my $today = $today_dt->day_of_week; my $target = 1; # Create DateTime copies to act as the "bookends" # for the date range my ($start, $end) = ($today_dt->clone(), $today_dt->clone()); if ($today == $target) { # If today is the target, "start" is already set; # we simply need to set the end date $end->add( days => 6 ); } else { # Otherwise, we calculate the Monday preceeding today # and the Sunday following today my $delta = ($target - $today + 7) % 7; $start->add( days => $delta - 7 ); $end->add( days => $delta - 1 ); } # I clone the DateTime object again because, for some reason, # I'm wary of using $start directly... my $cur_date = $start->clone(); while ($cur_date <= $end) { my $date_ymd = $cur_date->ymd; print "$date_ymd\n"; $cur_date->add( days => 1 ); } As mentioned, this works, but is it the quickest or most efficient? I'm guessing that quickness and efficiency may not necessarily go together, but your feedback is very appreciated.

    Read the article

  • Assemblies mysteriously loaded into new AppDomains

    - by Eric
    I'm testing some code that does work whenever assemblies are loaded into an appdomain. For unit testing (in VS2k8's built-in test host) I spin up a new, uniquely-named appdomain prior to each test with the idea that it should be "clean": [TestInitialize()] public void CalledBeforeEachTestMethod() { AppDomainSetup appSetup = new AppDomainSetup(); appSetup.ApplicationBase = @"G:\<ProjectDir>\bin\Debug"; Evidence baseEvidence = AppDomain.CurrentDomain.Evidence; Evidence evidence = new Evidence( baseEvidence ); _testAppDomain = AppDomain.CreateDomain( "myAppDomain" + _appDomainCounter++, evidence, appSetup ); } [TestMethod] public void MissingFactoryCausesAppDomainUnload() { SupportingClass supportClassObj = (SupportingClass)_testAppDomain.CreateInstanceAndUnwrap( GetType().Assembly.GetName().Name, typeof( SupportingClass ).FullName ); try { supportClassObj.LoadMissingRegistrationAssembly(); Assert.Fail( "Should have nuked the app domain" ); } catch( AppDomainUnloadedException ) { } } [TestMethod] public void InvalidFactoryMethodCausesAppDomainUnload() { SupportingClass supportClassObj = (SupportingClass)_testAppDomain.CreateInstanceAndUnwrap( GetType().Assembly.GetName().Name, typeof( SupportingClass ).FullName ); try { supportClassObj.LoadInvalidFactoriesAssembly(); Assert.Fail( "Should have nuked the app domain" ); } catch( AppDomainUnloadedException ) { } } public class SupportingClass : MarshalByRefObject { public void LoadMissingRegistrationAssembly() { MissingRegistration.Main(); } public void LoadInvalidFactoriesAssembly() { InvalidFactories.Main(); } } If every test is run individually I find that it works correctly; the appdomain is created and has only the few intended assemblies loaded. However, if multiple tests are run in succession then each _testAppDomain already has assemblies loaded from all previous tests. Oddly enough, the two tests get appdomains with different names. The test assemblies that define MissingRegistration and InvalidFactories (two different assemblies) are never loaded into the unit test's default appdomain. Can anyone explain this behavior?

    Read the article

  • SSH with Perl using file handles, not Net::SSH

    - by jorge
    Before I ask the question: I can not use cpan module Net::SSH, I want to but can not, no amount of begging will change this fact I need to be able to open an SSH connection, keep it open, and read from it's stdout and write to its stdin. My approach thus far has been to open it in a pipe, but I have not been able to advance past this, it dies straight away. That's what I have in mind, I understand this causes a fork to occur. I've written code accordingly for this fork (or so I think). Below is a skeleton of what I want, I just need the system to work. #!/usr/bin/perl use warnings; $| = 1; $pid = open (SSH,"| ssh user\@host"); if(defined($pid)){ if(!$pid){ #child while(<>){ print; } }else{ select SSH; $| = 1; select STDIN; #parent while(<>){ print SSH $_; while(<SSH>){ print; } } close(SSH); } } I know, from what it looks like, I'm trying to recreate "system('ssh user@host')," that is not my end goal, but knowing how to do that would bring me much closer to the end goal. Basically, I need a file handle to an open ssh connection where I can read from it the output and write to it input (not necessarily straight from my program's STDIN, anything I want, variables, yada yada) This includes password input. I know about key pairs, part of the end goal involves making key pairs, but the connection needs to happen regardless of their existence, and if they do not exist it's part of my plan to make them exist.

    Read the article

  • How does PATH environment affect my running executable from using msvcr90 to msvcr80 ???

    - by Runner
    #include <gtk/gtk.h> int main( int argc, char *argv[] ) { GtkWidget *window; gtk_init (&argc, &argv); window = gtk_window_new (GTK_WINDOW_TOPLEVEL); gtk_widget_show (window); gtk_main (); return 0; } I tried putting various versions of MSVCR80.dll under the same directory as the generated executable(via cmake),but none matched. Is there a general solution for this kinda problem? UPDATE Some answers recommend install the VS redist,but I'm not sure whether or not it will affect my installed Visual Studio 9, can someone confirm? Manifest file of the executable <assembly xmlns="urn:schemas-microsoft-com:asm.v1" manifestVersion="1.0"> <trustInfo xmlns="urn:schemas-microsoft-com:asm.v3"> <security> <requestedPrivileges> <requestedExecutionLevel level="asInvoker" uiAccess="false"></requestedExecutionLevel> </requestedPrivileges> </security> </trustInfo> <dependency> <dependentAssembly> <assemblyIdentity type="win32" name="Microsoft.VC90.DebugCRT" version="9.0.21022.8" processorArchitecture="x86" publicKeyToken="1fc8b3b9a1e18e3b"></assemblyIdentity> </dependentAssembly> </dependency> </assembly> It seems the manifest file says it should use the MSVCR90, why it always reporting missing MSVCR80.dll? FOUND After spending several hours on it,finally I found it's caused by this setting in PATH: D:\MATLAB\R2007b\bin\win32 After removing it all works fine.But why can that setting affect my running executable from using msvcr90 to msvcr80 ???

    Read the article

  • Unit test project doesn't recognize the classes it was generated from

    - by DougLeary
    I have a fairly simple file-system website consisting of one aspx page and several classes in separate .cs files. Everything is on my own HD. The web app itself builds and runs fine. Out of curiosity I decided to try out Visual Studio's nifty, easy-to-use unit test feature. So I opened each class file and clicked Create Unit Tests. VS generated a test project containing a set of test classes and some other files. Easy! But when I try to build or run the test project it throws a series of build errors, one for every class: The type or namespace name 'class-name' could not be found (are you missing a using directive or an assembly reference?). Somebody asked if my test project has a reference to the original project. Well no, because the original project is a file-system website. It has no bin folder and no DLL, so there's nothing to reference as far as I can tell. I would think that since VS generated these unit tests it would generate whatever references it needs, but apparently not. Is generating unit tests for file-system web apps an undocumented no-no, or is there a magic trick to getting it to work?

    Read the article

  • start-stop-daemon quoted arguments misinterpreted

    - by Martin Westin
    Hi, I have been trying to make an init script using start-stop-daemon. I am stuck on the arguments to the daemon. I want to keep these in a variable at the top of the script but I can't get the quotations to filter down correctly. I'll use ls here so we don't have to look at binaries and arguments that most people wont know or care about. The end result I am looking for is for start-stop... to run ls -la "/folder with space/" DAEMON=/usr/bin/ls DAEMON_OPTS='-la "/folder with space/"' start-stop-daemon --start --make-pidfile --pidfile $PID --exec $DAEMON -- $DAEMON_OPTS Double escaping the options and trying innumerable variations of quotations do not help... Then they end up at the daemon they are always messed up. Enclosing $DAEMON_OPTS in quotes changes things... then they are seen as one since quote... never the right number though :) Echoing the command-line (start-stop...) prints exactly the right stuff to screen. But the daemon (the real one, not ls) complains about the wrong number of arguments. How do I specify a variable so that quotes inside it are brought along to the daemon correctly? Thanks, Martin

    Read the article

  • gpg error - connection already closed?

    - by OopsForgotMyOtherUserName
    omg... hope someone can help me because I am so lost as to what to try next.... I don't know what is causing the error to happen, and I don't see how to figure it out... Keep going between the pgloader.conf examples and what I have, and I don't understand why I keep getting the 'connection already closed' error? The first few lines of my fr.conf is at the very end... I'd really appreciate / love some guidance here... Been trying to get this thing going all morning, and am even getting stuck just on this part... Running this command at the command line: /usr/bin/pgloader -c /var/mybin/pgconfs/fr.conf Yields this in the pgloader.log (with the process just hanging) more /tmp/pgloader.log 27-03-2010 12:22:53 pgloader INFO Logger initialized 27-03-2010 12:22:53 pgloader INFO Reformat path is ['/usr/share/python-support/pgloader/reformat'] 27-03-2010 12:22:53 pgloader INFO Will consider following sections: 27-03-2010 12:22:53 pgloader INFO fixed 27-03-2010 12:22:54 fixed INFO fixed processing 27-03-2010 12:22:54 pgloader INFO All threads are started, wait for them to terminate 27-03-2010 12:22:57 fixed ERROR connection already closed 27-03-2010 12:22:57 fixed INFO closing current database connection [pgsql] host = localhost port = 5432 base = frdb user = username pass = password [fixed] table = fr format = fixed filename = /var/www/fr.txt ...

    Read the article

  • curl post picture multipart/form-data, php cURL need help!

    - by user331071
    I'm trying to upload a picture to a specific website using php cURL but I don't really understand what parameters do I need to send because the data looks a bit weird . Here is what i got with the http analyzer Type : multipart/form-data; boundary=---------------------------182983931283 -----------------------------182983931283 Content-Disposition: form-data; name="file"; filename="Blue hills.jpg" Content-Type: image/jpeg Here appears the souce of the image itself like "ÿØÿàÿØÿàÿØÿàÿØÿàÿØÿàÿØÿà" -----------------------------182983931283 Content-Disposition: form-data; name="action" images -----------------------------182983931283 Content-Disposition: form-data; name="anonymous_email" Y -----------------------------182983931283 Content-Disposition: form-data; name="site_id" 1 -----------------------------182983931283 and so on other parameters. The issue that I have is that I don't understand what is the boundary, where do I get it from (because it doesn't appear in the html document that generates the POST and how should I make the post . If you would give me a simple example to post the above parameters to http://example.com I will definitely get the trick . Currently I'm using the following function to make the post : function processPicturesPage($title, $price, $numbedrooms, $description) { //Set the login parameters and initiate the Login process $fields = array( "changedImages" = "", "site_id" = "1", "posting_id" = "", "current_live_date" = "", "images_loaded" = "", "image_actions" = "", "title" = $title, ); foreach($fields as $key=$value) { $fields_string .= $key.'='.$value.'&'; } rtrim($fields_string,'&'); $URL = "http://www.example.com/cgi-bin/add_posting.pl"; return $this-processCurlrequest($URL, count($fields), $fields_string); } and in the processCurlrequest I have the curl options (cookies etc) and url .

    Read the article

  • Vim hanging after parsing .vimrc (even a blank one) file on Solaris 10

    - by Seamus
    Hello all, I am having a problem with vim 7.2 hanging (for about 10 seconds) after it parses the .vimrc file. I had a similar issue in the past with tcsh on linux, but it was resolved by setting TERM to xterm-color. The same does not resolve the issue here. Any idea what may be causing this? $ env USER=redacted LOGNAME=redacted HOME=/home/redacted PATH=redacted MAIL=/var/spool/mail/redacted SHELL=/bin/tcsh TZ=redacted LC_COLLATE=C SSH_CLIENT=redacted SSH_CONNECTION=redacted SSH_TTY=/dev/pts/11 TERM=dtterm HOSTTYPE=sun4 VENDOR=sun OSTYPE=solaris MACHTYPE=sparc SHLVL=1 PWD=/home/redacted GROUP=redacted HOST=redacted REMOTEHOST=redacted QUOTA_CHECKED=1 WHOAMI=redacted HOSTNAME=redacted EDITOR=vim PRINTER=redacted INFOPATH=/software/gnu/gcc/2.8.1/sun4os5.10/info:/software/gnu/sun4os5/info:/software/gnu/emacs/20.3.1/sun4os5/info:/software/gnuish/sun4os5/info:/usr/local/gnu/info MANPATH=/software/gnu/gcc/2.8.1/sun4os5.10/man:/software/gnu/sun4os5/man:/software/gnu/emacs/20.3.1/sun4os5/man:/opt/rational/clearcase/doc/man:/usr/openwin/man:/usr/share/man:/usr/local/man:/usr/dt/man:/software/gnuish/sun4os5/man H_ARCH=sun4 H_ARCHOS=sun4os5 H_ARCHOS_SUB=sun4os5.10 H_OSTYPE=SUNOS H_OSREV=51000 T_ARCH=sun4 T_ARCHOS=sun4os5 T_ARCHOS_SUB=sun4os5.10 T_OSTYPE=SUNOS T_OSREV=51000 X11HOME=/usr/local/x11/sun4os5 OPENWINHOME=/usr/openwin LD_LIBRARY_PATH=/usr/dt/lib:/usr/openwin/lib MOTIFHOME=/usr/dt XINITRC=/usr/openwin/lib/Xinitrc GCC_REV=281

    Read the article

  • Core Data: migrating entities with self-referential properties

    - by Dan
    My Core Data model contains an entity, Shape, that has two self-referential relationships, which means four properties. One pair is a one-to-many relationship (Shape.containedBy <- Shape.contains) and the another is a many-to-many relationship (Shape.nextShapes <<- Shape.previousShapes). It all works perfectly in the application, so I don't think self-referencing relationships is a problem in general. However, when it comes to migrating the model to a new version, then Xcode fails to compile the automatically generated mapping model, with this error message: 2009-10-30 17:10:09.387 mapc[18619:607] *** Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: 'Unable to parse the format string "FUNCTION($manager ,'destinationInstancesForSourceRelationshipNamed:sourceInstances:' , 'contains' , $source.contains) == 1"' *** Call stack at first throw: ( 0 CoreFoundation 0x00007fff80d735a4 __exceptionPreprocess + 180 1 libobjc.A.dylib 0x00007fff83f0a313 objc_exception_throw + 45 2 Foundation 0x00007fff819bc8d4 _qfqp2_performParsing + 8412 3 Foundation 0x00007fff819ba79d +[NSPredicate predicateWithFormat:arguments:] + 59 4 Foundation 0x00007fff81a482ef +[NSExpression expressionWithFormat:arguments:] + 68 5 Foundation 0x00007fff81a48843 +[NSExpression expressionWithFormat:] + 155 6 XDBase 0x0000000100038e94 -[XDDevRelationshipMapping valueExpressionAsString] + 260 7 XDBase 0x000000010003ae5c -[XDMappingCompilerSupport generateCompileResultForMappingModel:] + 2828 8 XDBase 0x000000010003b135 -[XDMappingCompilerSupport compileSourcePath:options:] + 309 9 mapc 0x0000000100001a1c 0x0 + 4294973980 10 mapc 0x0000000100001794 0x0 + 4294973332 ) terminate called after throwing an instance of 'NSException' Command /Developer/usr/bin/mapc failed with exit code 6 The 'contains' is the name of one of the self-referential properties. Anyway, the really big problem is that I can't even look at this Mapping Property as Xcode crashes as soon as I select the entity mapping when viewing the mapping model. So I'm a bit lost really where to go from here. I really can't remove the self-referential properties, so I'm thinking I've got manually create a mapping model that compiles? Any ideas? Cheers

    Read the article

  • Garbled text when constructing emails with vmime

    - by Klaus Fiedler
    Hey, my Qt C++ program has a part where it needs to send the first 128 characters or so of the output of a bash command to an email address. The output from the tty is captured in a text box in my gui called textEdit_displayOutput and put into my message I built using the Message Builder ( the object m_vmMessage ) Here is the relevant code snippet: m_vmMessage.getTextPart()->setCharset( vmime::charsets::US_ASCII ); m_vmMessage.getTextPart()->setText( vmime::create < vmime::stringContentHandler > ( ui->textEdit_displayOutput->toPlainText().toStdString() ) ); vmime::ref < vmime::message > msg = m_vmMessage.construct(); vmime::utility::outputStreamAdapter out( std::cout ); msg->generate( out ); Giving bash 'ls /' and a newline makes vmime give terminal output like this: ls /=0Abin etc=09 initrd.img.old mnt=09 sbin=09 tmp=09 vmlinuz.o= ld=0Aboot farts=09 lib=09=09 opt=09 selinux usr=0Acdrom home=09 = lost+found=09 proc srv=09 var=0Adev initrd.img media=09 root = Whereas it should look more like this: ls / bin etc initrd.img.old mnt sbin tmp vmlinuz.old boot farts lib opt selinux usr cdrom home lost+found proc srv var dev initrd.img media root sys vmlinuz 18:22> How do I encode the email properly? Does vmime just display it like that on purpose and the actual content of the email is ok?

    Read the article

  • Macports and virtualenv site-packages Fallback

    - by Streeter
    I've installed django and python as this link suggested with macports. However, I'd like to use virtualenv to install more packages. My understanding is that if I do not pass in the --no-site-packages to virtualenv, I should get the currently installed packages in addition to whatever packages I install into the virtual environment. Is this correct? As an example, I've installed django through macports and then create a virtual environment, but I cannot import django from within that virtual environment: [streeter@mordecai]:~$ mkvirtualenv django-test New python executable in django-test/bin/python Installing setuptools............done. ... (django-test)[streeter@mordecai]:~$ pip install django-debug-toolbar Downloading/unpacking django-debug-toolbar Downloading django-debug-toolbar-0.8.4.tar.gz (80Kb): 80Kb downloaded Running setup.py egg_info for package django-debug-toolbar Installing collected packages: django-debug-toolbar Running setup.py install for django-debug-toolbar Successfully installed django-debug-toolbar Cleaning up... (django-test)[streeter@mordecai]:~$ python Python 2.6.1 (r261:67515, Jun 24 2010, 21:47:49) [GCC 4.2.1 (Apple Inc. build 5646)] on darwin Type "help", "copyright", "credits" or "license" for more information. >>> import django Traceback (most recent call last): File "<stdin>", line 1, in <module> ImportError: No module named django >>> So I can install packages into the virtual environment, but it isn't picking up the global site-packages. Or am I not doing something correctly / missing something / misunderstanding how virtualenv works? I've got Mac OS 10.6 (Snow Leopard), have updated my macports packages and am using macports' python26 (via python_select python26).

    Read the article

  • Makefile; mirroring a growing tree through a process

    - by Martineau
    I would like to periodically mirror a growing tree, say, from $in to $out, doing a process in between (saving the only file header). As; #!/bin/bash in=./segd out=./db for f in `find $in -name "*.segd"`;do # Deduct output (dir + name) d=`dirname $f|perl -pe 's!'$in'!'$out'!'` n=`basename $f|perl -pe 's!$!_hdr!'` if [ ! -e $d/$n ]; then [ ! -d $d ] && mkdir -p $d; printf "From %s now build %s\n" $f "$d/$n" # Do something, whathever. For example e.g; dd if=$f bs=32 count=1 conv=swab 2>/dev/null|od -x > $d/$n fi done That is about fair. However; to be more robust, for a better synchronization (say if a source file did change or whatever), I would like to use a Makefile, as in; HDR := $(patsubst ./segd/%.segd,./db/%.segd_hdr,$(wildcard ./segd/*.segd)) all: ${HDR} db/%.segd_hdr: ./segd/%.segd echo "Doing" dd if=$< bs=32 count=1 conv=swab 2>/dev/null|od -x > $@ My problem; I cannot code this Makefile to "dive" more deeply within the source ./segd tree. How can we do it and is there a way ? Many thanks for your kind recommendations. PS: The idea will be to later rsync the (smaller) destination tree over a sat connection.

    Read the article

  • dynamic lib can't find static lib

    - by renyufei
    env: gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu9) app: Bin(main) calls dynamic lib(testb.so), and testb.so contains a static lib(libtesta.a). file list: main.c test.h a.c b.c then compile as: gcc -o testa.o -c a.c ar -r libtesta.a testa.o gcc -shared -fPIC -o testb.so b.c gcc -o main main.c -L. -ltesta -ldl then compile success, but runs an error: ./main: symbol lookup error: ./testb.so: undefined symbol: print code as follows: test.h #include <stdio.h> #include <stdlib.h> #include <errno.h> #include <string.h> #include <dlfcn.h> int printa(const char *msg); int printb(const char *msg); a.c #include "test.h" int printa(const char *msg) { printf("\tin printa\n"); printf("\t%s\n", msg); } b.c #include "test.h" int printb(const char *msg) { printf("in printb\n"); printa("called by printb\n"); printf("%s\n", msg); } main.c #include "test.h" int main(int argc, char **argv) { void *handle; int (*dfn)(const char *); printf("before dlopen\n"); handle = dlopen("./testb.so", RTLD_LOCAL | RTLD_LAZY); printf("after dlopen\n"); if (handle == NULL) { printf("dlopen fail: [%d][%s][%s]\n", \ errno, strerror(errno), dlerror()); exit(EXIT_FAILURE); } printf("before dlsym\n"); dfn = dlsym(handle, "printb"); printf("after dlsym\n"); if (dfn == NULL) { printf("dlsym fail: [%d][%s][%s]\n", \ errno, strerror(errno), dlerror()); exit(EXIT_FAILURE); } printf("before dfn\n"); dfn("printb func\n"); printf("after dfn\n"); exit(EXIT_SUCCESS); }

    Read the article

< Previous Page | 392 393 394 395 396 397 398 399 400 401 402 403  | Next Page >