Search Results

Search found 22668 results on 907 pages for 'command prompt'.

Page 397/907 | < Previous Page | 393 394 395 396 397 398 399 400 401 402 403 404  | Next Page >

• Ruby on Rails Mongrel web server stuck when MySQL service is running

  - by Marcos Buarque

  Hi, I am a Ruby on Rails newbie and already have a problem. I have started the Mongrel web server and it works fine when MySQL service isn't running. But when MySQL is on, Mongrel stucks. It ceases from serving the pages. So far, I have tested the localhost:3000 URL. When MySQL is off, it serves the page. When I click "about application's environment", I get the messasge (of course) "Can't connect to MySQL server on 'localhost' (10061)". After starting the MySQL service and refreshing, I get no more answer and Mongrel does not serve the webpage. It gets stuck with no answer to the browser. Then I have to stop the webserver and restart it. I have installed mysql2 gem with the command gem install mysql2. I was able to create the _test and _development databases with the command line rake db:create. I have tested with MySQL root user and blank password and also tried with a superuser user I have created. No success. Here is the server log: ======================== Started GET "/rails/info/properties" for 127.0.0.1 at Fri Dec 24 17:41:25 -0200 2010 Mysql2::Error (Can't connect to MySQL server on 'localhost' (10061)): Rendered C:/Ruby187/lib/ruby/gems/1.8/gems/actionpack-3.0.3/lib/action_dispatch/middleware/templates/rescues/_trace.erb (1.0ms) Rendered C:/Ruby187/lib/ruby/gems/1.8/gems/actionpack-3.0.3/lib/action_dispatch/middleware/templates/rescues/_request_and_response.erb (5.0ms) Rendered C:/Ruby187/lib/ruby/gems/1.8/gems/actionpack-3.0.3/lib/action_dispatch/middleware/templates/rescues/diagnostics.erb within rescues/layout (35.0ms) ================= I am running on a Windows 7 environment with firewall down.

  Read the article

• How to copy password from Mono-executed KeePass2 to xterm on Linux?

  - by Steve Emmerson

  I use KeePass2 to access username/password information in a Dropbox file. This allows convenient access from multiple devices. I can't seem to copy a password to the clipboard on my Linux 2.6.27.41-170.2.117.fc10.x86_64 system, however, in order to supply the password to a prompt in an xterm(1). I've tried both Ctrl+C/Ctrl+V and highlighting and mouse button 2 clicking. The KeePass2 program on the Linux system is executed by Mono. How can I copy the password to the xterm(1)? [Aside: I think we need a "KeePass" tag.] ADDENDUM: My mouse buttons were misconfigured: button 2 wasn't set to "copy". Sorry for the false alarm.

  Read the article

• capturing CMD batch file parameter list; write to file for later processing

  - by BobB

  I have written a batch file that is launched as a post processing utility by a program. The batch file reads ~24 parameters supplied by the calling program, stores them into variables, and then writes them to various text files. Since the max input variable in CMD is %9, it's necessary to use the 'shift' command to repeatedly read and store these individually to named variables. Because the program outputs several similar batch files, the result is opening several CMD windows sequentially, assigning variables and writing data files. This ties up the calling program for too long. It occurs to me that I could free up the calling program much faster if maybe there's a way to write a very simple batch file that can write all the command parameters to a text file, where I can process them later. Basically, just grab the parameter list, write it and done. Q: Is there some way to treat an entire series of parameter data as one big text string and write it to one big variable... and then echo the whole big thing to one text file? Then later read the string into %n variables when there's no program waiting to resume? Parameter list is something like 25 - 30 words, less than 200 characters. Sample parameter list: "First Name" "Lastname" "123 Steet Name Way" "Cityname" ST 12345 1004968 06/01/2010 "Firstname+Lastname" 101738 "On Account" 20.67 xy-1z 1 8.95 3.00 1.39 0 0 239 8.95 Items in quotes are processed as string variables. List is space delimited. Any suggestions?

  Read the article

• Unable to HTTP PUT with libcurl to django-piston

  - by Jesse Beder

  I'm trying to PUT data using libcurl to mimic the command curl -u test:test -X PUT --data-binary @data.yaml "http://127.0.0.1:8000/foo/" which works correctly. My options look like: curl_easy_setopt(handle, CURLOPT_USERPWD, "test:test"); curl_easy_setopt(handle, CURLOPT_URL, "http://127.0.0.1:8000/foo/"); curl_easy_setopt(handle, CURLOPT_VERBOSE, 1); curl_easy_setopt(handle, CURLOPT_UPLOAD, 1); curl_easy_setopt(handle, CURLOPT_READFUNCTION, read_data); curl_easy_setopt(handle, CURLOPT_READDATA, &yaml); curl_easy_setopt(handle, CURLOPT_INFILESIZE, yaml.size()); curl_easy_perform(handle); I believe the read_data function works correctly, but if you ask, I'll post that code. I'm using Django with django-piston, and my update function is never called! (It is called when I use the command line version above.) libcurl's output is: * About to connect() to 127.0.0.1 port 8000 (#0) * Trying 127.0.0.1... * connected * Connected to 127.0.0.1 (127.0.0.1) port 8000 (#0) * Server auth using Basic with user 'test' > PUT /foo/ HTTP/1.1 Authorization: Basic dGVzdDp0ZXN0 Host: 127.0.0.1:8000 Accept: */* Content-Length: 244 Expect: 100-continue * Done waiting for 100-continue ** this is where my read_data handler confirms: read 244 bytes ** * HTTP 1.0, assume close after body < HTTP/1.0 400 BAD REQUEST < Date: Thu, 13 May 2010 08:22:52 GMT < Server: WSGIServer/0.1 Python/2.5.1 < Vary: Authorization < Content-Type: text/plain < Bad Request* Closing connection #0

  Read the article

• Vim - show diff on commit in mercurial;

  - by JackLeo

  In my .hgrc I can provide an editor or a command to launch an editor with options on commit. I want to write a method or alias that launches $ hg ci, it would not only open up message in Vim, but also would split window and there print out $ hg diff. I know that I can give parameters to vim by using +{command} option. So launching $ vim "+vsplit" does the split but any other options goes to first opened window. So I assume i need a specific function, yet I have no experience in writing my own Vim scripts. The script should: Open new vertical split with empty buffer (with vnew possibly) In empty buffer launch :.!hg diff Set empty buffer file type as diff :set ft=diff I've written such function: function! HgCiDiff() vnew :.!hg diff set ft=diff endfunction And in .hgrc I've added option: editor = vim "+HgCiDiff()" It kind of works, but I would like that splited window would be in right side (now it opens up in left) and mercurial message would be focused window. Also :wq could be setted as temporary shortcut to :wq<CR>:q! (having an assumption that mercurial message is is focused). Any suggestions to make this a bit more useful and less chunky? UPDATE: I found vim split guide so changing vnew with rightbelow vnew opens up diff on the right side.

  Read the article

• Visual Studio 2010: very slow web applications debugging!

  - by micha12

  I recently installed Visual Studio 2010 (Ultimate edition, final version released in April), and found that debugging a web application became very slow (2-3 times slower than in Visual Studio 2008)! I took the same web application and checked the speed of loading of one of its pages in VS 2008 and VS 2010, and compared the time it takes to load the page. I tested it using 2 approaches: 1) debugging under ASP.NET Development Server (by pressing the "Start" button) and 2) using ASP.NET Development Server without debugging (by using the "View in Browser" menu command). And I got the following results for Visual Studio 2008 and 2010. 1) ASP.NET Development Server withoud debugging ("View in Browser"): the speed of page loading is the same in VS 2008 and 2010. 2) Debugging under ASP.NET Development Server ("Start" button): in VS 2010 the page takes more time to load than in VS 2008 - VS 2010 debugging is 2-3 times slower than in VS 2008! 3) At the same time, when debugging a web application in VS 2008, it takes the same time to load the page compared to when using only the "View in Browser" command. That is, VS 2008 debugging does not introduce any overhead to page loading in the web browser! I wanted to make sure that other people have the same problem with slow debugging of web applications in VS 2010. Can this issue be solved by any means? BTW, I am using Windows XP SP3. Thank you.

  Read the article

• How can I throttle the bandwidth consumed by Windows Automatic Updates?

  - by eleven81

  We have many Windows XP computers sharing one connection to the internet. These machines are set to download all available automatic updates and then prompt the user to install them. Whenever Patch Tuesday rolls around, our internet usage pegs out, and remains that way for most of the day, and sometimes into the following Wednesday. This hurts! I still want the machines to start to download the updates as soon as they are available, but if it takes until Thursday or Friday before the last updates are downloaded, that's still better than the latency and dropped connections we are seeing now as a result of the internet connection bottleneck. What can I do to throttle back how rapidly each machine downloads the updates, while still having them all start the download process as soon as the updates are available? I have no desire to run a WSUS server. Also, the internet connection is more than enough, whenever there are no updates to download.

  Read the article

• How to Enable Ports 25 - 28 on a Cisco Catalyst 3750

  - by Jared Brown

  I am trying to enable ports 25 - 28 on my 28 port Catalyst 3750. These four ports are my fiber ports. I am using the following command to bring up that interface. interface range Gi1/0/25 - 28 That works and it dumps me in the config-if-interface prompt. This is where I get stuck. I just want to enable these four ports and have them be in VLAN1 and On just like ports 1 - 24. How do I do this?

  Read the article

• Apache does not serve non-locally

  - by yodaj007

  I have a freshly installed instance of Fedora Core 16 inside VirtualBox using bridged networking. On it, as root I typed in: yum -y install httpd service httpd start ifconfig Inside the VM, I can open a web browser to 'localhost' and I get the Apache test page. It works. But in Windows (the machine hosting the VM), I point my browser to the IP address returned by ifconfig (192.168.2.122). The connection times out. I can go to a command prompt and ping the VM. Is there a firewall or something that comes with Fedora by default? Or is there something I need to change in a config file?

  Read the article

• Update saved password for basic authentication using a script

  - by Kalamane

  I have a website that uses basic authentication as described on this webpage. Each of the computers I manage have the password saved in their browser. There is only one username and password for this. After someone logs in to the site this way, they are presented with their individual username and password prompt as part of the web page. The purpose of the initial username/password is to discourage non-technical employees that aren't supposed to be using the page from even viewing it. So far, when we've had to change this password, I've manually gone to each computer and updated the saved password. I'm writing a startup script to configure other aspects of these systems so that I can maintain them easier. I'd like to be able to update the saved password via this script. The operating system running on these machines is Windows XP SP3 and the browsers they're using to access this site are IE8 and IE9. How can I update the saved basic authentication information for a website via a script?

  Read the article

• Getting molly-guard to work with sudo

  - by 0xC0000022L

  The program molly-guard is a brilliant little tool which will prompt you for a piece of information before you reboot or shut down a system. Usually it asks for the hostname. So when you work a lot via SSH, you won't end up taking down the wrong server, just because you were in the wrong tab or window. Now, this works all fine when you say reboot on the command line while you are already root. However, it won't work if you do sudo reboot (i.e. it won't even ask). How can I get it to work with sudo as well? System: Raspbian (latest, including updates), package molly-guard version 0.4.5-1.

  Read the article

• Cann Boost Program_options separate comma separated argument values

  - by lrm

  If my command line is: > prog --mylist=a,b,c Can Boost's program_options be setup to see three distinct argument values for the mylist argument? I have configured program_options as: namespace po = boost::program_options; po::options_description opts("blah") opts.add_options() ("mylist", std::vector<std::string>>()->multitoken, "description"); po::variables_map vm; po::store(po::parse_command_line(argc, argv, opts), vm); po::notify(vm); When I check the value of the mylist argument, I see one value as a,b,c. I'd like to see three distinct values, split on comma. This works fine if I specify the command line as: > prog --mylist=a b c or > prog --mylist=a --mylist=b --mylist=c Is there a way to configure program_options so that it sees a,b,c as three values that should each be inserted into the vector, rather than one? I am using boost 1.41, g++ 4.5.0 20100520, and have enabled c++0x experimental extensions.

  Read the article

• How can I create bootable DOS usb stick?

  - by Grzenio

  I need to use this utility to change one of the parameters of my new WD hard drive: http://support.wdc.com/product/download.asp?groupid=609&sid=113&lang=en It has truly unreadable instructions: Extract wdidle3.exe onto a bootable medium (floppy, CD-RW, network drive, etc.). Boot the system with the hard drive to be updated to the medium where the update file was extracted to. Run the file by typing wdidle3.exe at the command prompt and press enter. I understand that this bootable medium should be some version of DOS? How can I make my USB stick a bootable medium compatible with this utility (I don't have a diskette drive)? I have Windows 7 and Debian Linux installed.

  Read the article

• Looking for all-in-one drm/installer/CD creation kit.

  - by user30997

  The company I work for has a download manager in place that handles distribution, DRM, installation of our products - when a user gets them off our website. However, we're using an clunky system for packaging and protecting our products when we do press releases or make retail CDs. Part of the antiquation problem is the fact that the automated system that works with the installer- and DRM-creation software we have is a disaster that needs to be put out of my misery. The list of products that we currently produce, that I would like a new system MUST be capable of producing: Retail CDs, with a certain level of obfuscation to make copying difficult. Downloadable installers that time out after a few hours of use of the product. After the time has expired, removing and reinstalling the product will leave you still blocked from use. Installers that will fail to work after a certain date. I'd love to be able to just feed a tool the directory where a complete product resides and have the installer generated with a couple command-line operations. (The command-line issue is non-negotiable this well be called by an automated tool.) A single-solution package would be far preferable. Software with royalty-based or per-unit based licensing is not an option.

  Read the article

• Unable to FTP, any ideas?

  - by Nick

  I'm using Windows Server 2003. I have the FTP services installed, router set to DMZ, and currently Anonymous logins allowed. (I know, security risk, but there's nothing important on there and not worried at the moment) So here's the thing... I can ftp to my computer, list directory, get files etc, BUT only if I'm using the command prompt. If I try to log in using IE or any FTP client it's just timing out. I've tried: username@ipaddress ipaddress username:password@ipaddress and not able to get any of them to work. Anyone have any ideas? Thanks!!!

  Read the article

• rsync remote to local automatic backup

  - by Mark Molina

  Because all my work is stored on a remote server I would like to auto backup my server monthly and weekly. My server is running Centos 5.5 and while searching the web I'm found a tool named rsync. I got my first update manually by using this command in terminal: sudo rsync -chavzP --stats USERNAME@IPADDRES: PATH_TO_BACKUP LOCAL_PATH_TO_BACKUP I then prompt my password for that user and bob's my uncle. This backups the necessary files from my remote server to my local device but does somebody know how I can automate this? Like automatic running this script every sunday? EDIT I forgot to mention that I let direct admin backup the files I need and then copy those files from the remote server to a local server.

  Read the article

• Getting table schema from a query

  - by Appu

  As per MSDN, SqlDataReader.GetSchemaTable returns column metadata for the query executed. I am wondering is there a similar method that will give table metadata for the given query? I mean what tables are involved and what aliases it has got. In my application, I get the query and I need to append the where clause programically. Using GetSchemaTable(), I can get the column metadata and the table it belongs to. But even though table has aliases, it still return the real table name. Is there a way to get the aliase name for that table? Following code shows getting the column metadata. const string connectionString = "your_connection_string"; string sql = "select c.id as s,c.firstname from contact as c"; using(SqlConnection connection = new SqlConnection(connectionString)) using(SqlCommand command = new SqlCommand(sql, connection)) { connection.Open(); SqlDataReader reader = command.ExecuteReader(CommandBehavior.KeyInfo); DataTable schema = reader.GetSchemaTable(); foreach (DataRow row in schema.Rows) { foreach (DataColumn column in schema.Columns) { Console.WriteLine(column.ColumnName + " = " + row[column]); } Console.WriteLine("----------------------------------------"); } Console.Read(); } This will give me details of columns correctly. But when I see BaseTableName for column Id, it is giving contact rather than the alias name c. Is there any way to get the table schema and aliases from a query like the above? Any help would be great!

  Read the article

• mysql row locking via php

  - by deezee

  I am helping a friend with a web based form that is for their business. I am trying to get it ready to handle multiple users. I have set it up so that just before the record is displayed for editing I am locking the record with the following code. $query = "START TRANSACTION;"; mysql_query($query); $query = "SELECT field FROM table WHERE ID = \"$value\" FOR UPDATE;"; mysql_query($query); (okay that is greatly simplified but that is the essence of the mysql) It does not appear to be working. However, when I go directly to mysql from the command line, logging in with the same user and execute START TRANSACTION; SELECT field FROM table WHERE ID = "40" FOR UPDATE; I can effectively block the web form from accessing record "40" and get the timeout warning. I have tried using BEGIN instead of START TRANSACTION. I have tried doing SET AUTOCOMMIT=0 first and starting the transaction after locking but I cannot seem to lock the row from the PHP code. Since I can lock the row from the command line I do not think there is a problem with how the database is set up. I am really hoping that there is some simple something that I have missed in my reading. FYI, I am developing on XAMPP version 1.7.3 which has Apache 2.2.14, MySQL 5.1.41 and PHP 5.3.1. Thanks in advance. This is my first time posting but I have gleaned alot of knowledge from this site in the past.

  Read the article

• include all vim files in a folder

  - by queueoverflow

  For my .bashrc I have a lot of small snippet files in .config/bash, like 10-prompt.sh and so on. In my actual .bashrc, I just have the following: configdir="$HOME/.config/bash" for file in "$configdir"/*.sh do source "$file" done I'd like to do the same for my .vimrc, but I am not that confident in VimL that I could write that. How would the snippet for .vimrc look like that includes all the snippets in a given subfolder? Ideally, I'd like to make a .vim/rc/ folder where I can put my snippets into.

  Read the article

• How do I make the Windows low memory warning less sensitive?

  - by Stephen

  I keep getting this annoying low memory warning/prompt to close games I play. It happens very often and I still have ~6 gigs of ram free. I disabled virtual memory because it was putting stuff on the pagefile when I had 10 gigs free ram so that spiked my disk usage. Is there any way to disable this warning? I have 16GB ram so it shouldn't be an issue. I would prefer to keep pagefiles off because my HD is very loud so it's nice to keep it spun down as much as possible. I don't want to disable it completely. Ideally, I would like it to go off when I have ~2GB left rather than 6, but if this isn't viable, I may just disable it completely.

  Read the article

• Overriding content_type for Rails Paperclip plugin

  - by Fotios

  I think I have a bit of a chicken and egg problem. I would like to set the content_type of a file uploaded via Paperclip. The problem is that the default content_type is only based on extension, but I'd like to base it on another module. I seem to be able to set the content_type with the before_post_process class Upload < ActiveRecord::Base has_attached_file :upload before_post_process :foo def foo logger.debug "Changing content_type" #This works self.upload.instance_write(:content_type,"foobar") # This fails because the file does not actually exist yet self.upload.instance_write(:content_type,file_type(self.upload.path) end # Returns the filetype based on file command (assume it works) def file_type(path) return `file -ib '#{path}'`.split(/;/)[0] end end But...I cannot base the content type on the file because Paperclip doesn't write the file until after_create. And I cannot seem to set the content_type after it has been saved or with the after_create callback (even back in the controller) So I would like to know if I can somehow get access to the actual file object (assume there are no processors doing anything to the original file) before it is saved, so that I can run the file_type command on that. Or is there a way to modify the content_type after the objects have been created.

  Read the article

• Why is rsync.exe [cwRsync] trying to open a port when in client mode?

  - by hemancuso

  I'm trying to use a cygwin compiled version of rsync [the cwrsync package] on Windows and in seemingly whatever configuration I test in there is a request to the user presented by Windows Firewall to allow inbound traffic. If you deny this request, everything works fine - as expected. I'm doing a vanilla push rsync.exe localpath user@remotepath:/absolutepath and it works just fine. I've also attempted this command having deleted ssh from the path and using rsync on local paths - still a firewall prompt. Why is this listen() happening and is there a way I can force the client to not attempt to listen without recompiling and maintaing a patch?

  Read the article

• How to whitelist a user agent for nginx?

  - by djb

  I'm trying to figure out how to whitelist a user agent from my nginx conf. All other agents should be shown a password prompt. In my naivity, I tried to put the following in before deny all: if ($http_user_agent ~* SpecialAgent ) { allow; } but I'm told "allow" directive is not allowed here (!). How can I make it work? A chunk of my config file: server { server_name site.com; root /var/www/site; auth_basic "Restricted"; auth_basic_user_file /usr/local/nginx/conf/htpasswd; allow 123.456.789.123; deny all; satisfy any; #other stuff... } Thanks for any help.

  Read the article

• Moving information between databases

  - by williamjones

  I'm on Postgres, and have two databases on the same machine, and I'd like to move some data from database Source to database Dest. Database Source: Table User has a primary key Table Comments has a primary key Table UserComments is a join table with two foreign keys for User and Comments Dest looks just like Source in structure, but already has information in User and Comments tables that needs to be retained. I'm thinking I'll probably have to do this in a few steps. Step 1, I would dump Source using the Postgres Copy command. Step 2, In Dest I would add a temporary second_key column to both User and Comments, and a new SecondUserComments join table. Step 3, I would import the dumped file into Dest using Copy again, with the keys input into the second_key columns. Step 4, I would add rows to UserComments in Dest based on the contents of SecondUserComments, only using the real primary keys this time. Could this be done with a SQL command or would I need a script? Step 5, delete the SecondUserComments table and remove the second_key columns. Does this sound like the best way to do this, or is there a better way I'm overlooking?

  Read the article

• debian hang on startup "starting the winbind daemon: winbind"

  - by Bajingan Keparat

  I took a copy of a VM running a debian, just so that I can play around with it. I spin up the copy, but didn't give it any network connection to avoid conflict with the original one. However, when I turn the VM on, it seems to freeze after this startup message Starting Sambe daemons:nmbd smbd Starting PostgreSQL 8.4 database server: main Starting the Winbind daemon: winbind how do i fix this? I never get to the prompt to login. This vm does have a mount point that connects to a windows share folder.

  Read the article

< Previous Page | 393 394 395 396 397 398 399 400 401 402 403 404  | Next Page >