Search Results

Search found 22499 results on 900 pages for 'boot screen'.

Page 398/900 | < Previous Page | 394 395 396 397 398 399 400 401 402 403 404 405  | Next Page >

• Installing nVidia drivers for Quadro FX 880M on 10.10 caused shutdown/startup issues.

  - by Chantz

  So I was facing weird graphics drivers issues due to the default nouveau drivers that came installed with Ubuntu 10.10 hence I installed the latest nVidia graphics drivers & I the weird graphics issues stopped happening. So far so good, but when I tried to shut down the laptop it got stuck at the window with text 15, shutting down... modem-manager: Caught signal 15, shutting down... init: Disconnected from system us init: dbus main process (1107) killed by TERM signal And this happens .everytime.without.fail. I tried updating the kernel and any/all drivers through update manager but it stil happens. Not only this even the startup screen is totally screwed up. It just displays Ubuntu 10.10 in text with 3 dots. But that is acceptable. To power cycle down the laptop each and everytime for shutdown is not cool. Same goes for when I try to restart. Interesting thing is if I try to shutdown the laptop when I am on the login screen it does so without any problems. I googled & many people seem to face the same issue but I couldn't find any silver bullet hoping to find one here.

  Read the article

• Windows always open top left

  - by BobTodd

  I find this a highly annoying "feature" on a wide screen monitor that my mostly used apps - terminal and gedit always open directly under the top-left corner of my screen and I have to drag them to my eye position each and every-time. I have tried installing the CompizConfig Settings Manager and using the feature to position windows centre, but this has had no effect - the force feature here isn't working for me either. I can use e.g. gnome-terminal --geometry=140x50+50+50 for the terminal but this doesn't work for gedit. Any ideas? Thanks

  Read the article

• Ubuntu 11.10 very slow compared to Windows

  - by Patrick

  I'm new to Ubuntu/linux. Since my PC is very old and not very fast with Windows 7, I decided to give Ubuntu a try, so I downloaded and installed Ubuntu 11.10 today. When I first started it, I had bad 800x600 resolution and it was very slow and annoying. So I installed a driver for my graphic card and now everything looks very nice (1280x1024).But I think it's still far slower than Windows 7. I tried to run in Ubuntu like a few people suggested on the forum but if I log in I get a black screen saying something like "this video mode cannot be displayed". I get that same screen when booting Ubuntu btw, but after about 15 seconds it disappears and just starts Ubuntu. I also installed other drivers for my graphic card but everything stayed the same. I noticed that i.e. when I open Firefox or system settings it takes about 5 seconds till it opens (while Windows 7 takes under 1 second to start i.e. Chrome) and when I do this my CPU usage gets to 100% for a short time. Computer specs: Memory: 2GB RAM Processor: Intel Pentium 4 2.8GHz Graphics Card: Nvidia GeForce 6800 400MHz. I read on various forums that 11.04 works flawless on many PCs, where 11.10 is very slow. Should I install 11.04 or could anybody help me with this problem?

  Read the article

• Network tries to reindentify itself now and then

  - by Don Young

  When the computer starts up it connects itself to the router (ZTE 4G router) automatically, but after I have surfed the web for a while, it tries to identify itself, meaning you get that little blue circle next to the little screen at the corner. When browsing it does not cause any problems, but if I'm streaming a video the video will then stop, I'll have to refresh the page to make the video start again. And if I'm playing a game, LoL for example, the game will freeze for about 2 seconds then continue again (due to lost connection to the internet). I have no virus on my computer, although I had before. I have reset my router, restarted my computer, updated my ethernet driver, checked so that the IPv4 is set on automatic and tried different router channels. I have had this router for a few months and the problem just started recently. Here is the ipconfig screen:

  Read the article

• Unable to start after 13.04 > 13.10 udate

  - by romainl

  At the end of the update process, clicking on the Restart button had no visible effect whatsoever. After waiting 5 to 10 minutes, I decided to reboot the computer manually. Since then, I rebooted a good dozen times (not with the hope that it would work but with the hope of reading the messages) with the same non-result and the same symptoms: I get the ASCII text-on-purple Ubuntu 13.10 . . . . splash screen with these messages: * Restoring resolver state... [OK] * Starting crash report submission daemon [OK] * Starting CUPS printing spooler/server [OK] Everything disappears. The whole process hangs at a purple screen with the mouse cursor right in the middle. At this point, I'm unable to use the mouse and the keyboard. Booting from a 12.04 CD works perfectly, Disk Utility says that all my disks are OK and I can mount my main partition without problems. Something obviously went wrong at the end of the upgrade but I have no idea what. I'd appreciate any pointer. This is the kind of moment where you really think "Next time, I'll separate my /home partition for sure". My machine is an aging but working Dell Inspiron 530 with an Intel Core Duo E2160 processor, 2 GHz of RAM and an ATI Radeon HD3650 video card. Thanks.

  Read the article

• ubuntu 13.10 liveboot/installer loads dots, then does nothing

  - by user200245

  Problem: When I load an Ubuntu 13.10 (64-bit) live USB / installer on my laptop, the purple Ubuntu screen with the white dots appears, the dots turn orange (indicating its loading), then after a few seconds the screen turns completely black and nothing else happens. I can not install Ubuntu 13.10 on this computer. What I've Tried: I've re-downloaded the .iso file from canonical. I've burned the .iso to the USB using the default linux usb image writer, and the Windows programs YUMI and Linux Live USB Creator; same thing happens each time. Yes, I'm sure my computer is 64 bit. I'm currently running Linux Mint 15 on it, which runs perfectly. It's a Sager NP7330 / Clevo w230st. extra info A few months I installed Ubuntu 13.04 on this machine, which installed perfectly. Normally I'd install that then dist-upgrade to 13.10, HOWEVER this computer is only a few months old and the wireless/network drivers for my network card were not implemented until kernel 3.11 (which comes w ith 13.10). I tried manually downloading kernel 3.11 and installing it (on 13.04), however the wireless card nor ethernet card still did work with Ubuntu 13.04. So my only real hope is to get 13.10 working. Does anyone know what's up with this?

  Read the article

• RDP windows key jamming

  - by VBwhatnow

  There is a known bug in RDP; if you lock the screen while connected to a computer the computer you are connected to will have its windows key jammed. There are a few work arounds that involve hammering the windows key and re-locking the screen but this isn't a bug I want to put up with anymore. Microsoft has said they wont fix this bug because it's XP specific and they are only working on security bugs now because XP is at end of life. Is there any way I can fix this or am I just going to have to find an alternative remote desktop software.

  Read the article

• How to remove installation like SET ,metasploit

  - by Renado

  i have installed into me laptop dual boot windows 7 and ubuntu 13.04 and i have install into ubuntu SET form www.trustedsec.com .it create direcotry set but when i try to start set it dosent start .when i type ./set it get error or ./set is a direcory can you give me a solution how to install it step by step or how to remove set for my pc. a second problem is when i install aircrack-ng when i type airmon-ng on terminal my desktop go crazy and i must restart manyally form my power button. Thanks

  Read the article

• Why are prefab customizations being applied to only a single character? [on hold]

  - by m0rgul

  I've built my (networked) game to the point where I have a room, some characters and a character customization screen. In the character customization screen I get to chose gender, chose from three different wardrobe options and assign custom colors to these wardrobe items. Then I use a custom object to store these options, serialize them and store them in PlayerPrefs, then load the next scene and apply them to my chosen character in this scene. Then I go and spawn some more characters, customize them, etc. The problem is that my character is always customized, but all other characters in the scene are default copies of the prefab. The prefabs themselves are a generic male and a generic female, both with three different wardrobes to chose from (they are included in the prefab). When I spawn my character, I go to the saved options in PlayerPrefs, destroy the two discarded wardrobes, apply color to my chosen wardrobe and then spawn the character. How would it be possible to make the other characters also show up in their customized form rather than just the generic prefab (which shows all three wardrobes at the same time)?

  Read the article

• Nvidia drivers with GeForce 680M problem [closed]

  - by biofermin

  Possible Duplicate: There's an issue with an Alpha/Beta Release of Ubuntu, what should I do? I have a new Alienware M17x which I have installed 64-bit Ubuntu 12.10 (dual boot). I have tried various ways to install the Nvidia drivers for the GeForce GTX 680M (which they claim they are compatible with): from Ubuntu Software Centre (though Additional Drivers fails to detect the card.) using sudo apt-get install nvidia-current downloading the drivers from nvidia and manually installing them (ctrl + alt + F6, sudo service lightdm stop, sudo ./NVIDIA*, sudo reboot) (each with a clean install of Ubuntu) but in all cases, when I reboot after installing nvidia-setings claims that I am not using the driver and should sudo nvidia-xconfig from the terminal, which I do but this has no effect and I am stuck in crappy resolution until I rm /etc/X11/xorg.conf and reboot. The xorg.conf that nvidia-xconfig generates is: Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" HorizSync 28.0 - 33.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• The ‘Coolest’ Server You will Ever See [Video]

  - by Asian Angel

  What is a little bit of snow-covered server between friends, right? From YouTube: This is an experimental Free Air Cooling setup called a Helsinki Chamber. You can learn more about this experimental server cooling technology here. Snow is not a problem for servers in Finland [via Fail Desk] Our Geek Trivia App for Windows 8 is Now Available Everywhere How To Boot Your Android Phone or Tablet Into Safe Mode HTG Explains: Does Your Android Phone Need an Antivirus?

  Read the article

• How to disable screens turn off Windows 8.1

  - by Warpzit

  So recently my computer started turning my screen monitors off after a while without activity, if I move the mouse or hit the keyboard they turn back on. I just want them to stay on. My System is windows 8.1 64 bit, I have 2 screens with mini display port and 1 television with hdmi which often is in regular television mode when this issue happens. Now before you jump to conclusions this is what I've tryed: Disabled screen saver Power saving settings to high with following set: Turn of the display: Never Put the computer to sleep: Never Turn off hard disk after: Settings: Never Sleep: Sleep after: Settings: Never Display: Turn off display after: Settings: Never Display: Enable adaptive brightness: Settings: Off Multimedia settings: When sharing media: Settings: Prevent idling to sleep. Any pointers that get me in the right direction will be greatly appreciated.

  Read the article

• Why has hibernation stopped working after moving my 12.04 install to a different laptop?

  - by megabytephreak

  I recently got a new laptop (Thinkpad X230). I didn't really have time to do a fresh install so I copied my install (xubuntu 12.04) over from my old machine (Thinkpad X61). Now when I try to hibernate it seems to do the Hibernate step fine, but doesn't seem to try and resume when booting back up. It just does a fresh boot. Is there something I need to do so the system knows where to look for the hibernation data?

  Read the article

• Dual Monitor in Ubuntu 11.10 is resetting the theme

  - by Mengu

  i'm experiencing a strange problem with dual monitors. when i set the dual monitor via "nvidia settings" and save the setting to xorg.conf, the default unity theme and icons are turning back to gtk default. i also get an error telling me "could not apply the stored configuration for monitors" here is my xorg.conf: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 280.13 (buildd@yellow) Fri Aug 5 12:31:28 UTC 2011 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "Chi Mei Optoelectronics corp." HorizSync 30.0 - 75.0 VertRefresh 60.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 540M" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-0" Option "metamodes" "DFP: nvidia-auto-select +0+0, CRT: 1680x1050 +1920+0" SubSection "Display" Depth 24 EndSubSection EndSection here is an example of what i'm talking about: http://i.stack.imgur.com/vrlW1.png how can i fix this? thanks in advance.

  Read the article

• Ctrl-Alt-F1 never gives prompt

  - by nispio

  When I press Ctrl+Alt+F1 in my Red Hat Enterprise Linux 6.4 (Santiago) I get a black screen with a blinking cursor, but I never get a login prompt. I can get back to my desktop with Ctrl+Alt+F7, and things work as normal. However, when I run sudo init 3 I get the same thing, but this time I am stuck at the screen and can't get back without a reboot. I'm not even sure where to start looking for the cause of this problem. Are the startup scripts that might be causing the problem or other system configurations that could lead to this? If this is not an known issue, what steps should I take to debug?

  Read the article

• Should Starting a Quick Game via Google Game Services be Iterated?

  - by user46727

  I have been following this tutorial for Google Play Game Services. I am a little unclear as to if the room matching algorithm should be looped or not. Can I just initialize this process once and let it time out? Or by iterating through it is it somehow rechecking it? If anyone had the approximate timeout that would be great as well. The problem stems from the fact that even when both phones are signing into the Game Services (at virtually the same time, my friend and I logged in), the room is not registering multiple people. One time my friend's phone even entered the game map, showing that he somehow was able to progress from the room initialization process. Relevant screen update methods which I am starting this matchmaking process: @Override public void update(float deltaTime) { game.options.updateTiles(); if(!isInitiated) { startQuickGame(); } } private void startQuickGame() { // auto-match criteria to invite one random automatch opponent. // You can also specify more opponents (up to 3). if(game.mGoogleClient.isConnected() && !isInitiated) { Bundle am = RoomConfig.createAutoMatchCriteria(1, 3, 0); // build the room config: RoomConfig.Builder roomConfigBuilder = RoomConfig.builder(Network.getInstance()); roomConfigBuilder.setMessageReceivedListener(Network.getInstance()); roomConfigBuilder.setRoomStatusUpdateListener(Network.getInstance()); roomConfigBuilder.setAutoMatchCriteria(am); RoomConfig roomConfig = roomConfigBuilder.build(); // create room: Games.RealTimeMultiplayer.create(game.mGoogleClient, roomConfig); // go to game screen this.mRoom = Network.getInstance().getRoom(); if(this.mRoom != null && this.mRoom.getParticipants().size() >= 2) { game.setScreen(new MultiGameScreen(game, this.mRoom)); isInitiated = true; } } else { game.mGoogleClient.connect(); } }

  Read the article

• why there is a lot change in the hardware support features in different linux os?

  - by TrazerWalker

  i am using lenovo b460 with 3 GB ram and 500 GB hard disk,(no graphics card). when i live boot Linux mint i was able to connect to WiFi.but when i booted up Ubuntu 11.4 i was not able to connect through WiFi.then later i installed Ubuntu 12.4 and then i got connected with WiFi, but after installing icons and themes through my unity i am not able to view the content in the terminal and the WiFi is also not connecting now even after i changed them all back. wireless connectivity

  Read the article

• HDMI & Display Port stopped work on 11.10

  - by dizzy

  After upgraded two laptops to 11.10, HDMI and Display ports stopped to work. Symptoms on each (btw. it used to work with 11.04 on both): laptop Dell Inspiron 1525 (HDMI, Intel GMX 3100): after HDMI cable is plugged in, screen is corrupted (no panel, no icons), system is unresponsive, TV set receives some signal, but only blue screen and some regular ticks can be heard. Unplugging the cable system recovers. No logs were checked. Thinkpad W510 (DisplayPort, NVidia). Simple "Screens" utility does not recognizes TV set, but this is something to do with the differences between Nvidia driver API and the one expected from the utility, as far I could spot on the net. However, using Nvidia-settings, TV is recognized, but cannot be enabled and used. Beside that, touch pad freezes after HDMI2DisplayPort connector is plugged in the laptop (not immediately, but after few seconds - probably after some handshake with the TV set crashes). It is strange that no such bug reports can be found on the net. So, I guess it is something wrong on our laptops only, but would appreciate some hints (i.e. any known changes recently related to HDMI, Display Port, X-Windows, kernel... wherever I should take a look and fix the issue).

  Read the article

• Problem with Toshiba Mini Netbook not turning on

  - by wahle509

  This is the second time this has happened with my Toshiba Mini Netbook. When I restart it, it will shut down but then not come back up. It seems like it's running but the screen is blank and the power button is lit. The first time it happened I shut it down via the power button, then turned it back on while pressing F2 and it came up properly. Now, however, it is not doing it. The screen remains blank. What could be causing this and how do I fix it? It is running Windows XP.

  Read the article

• Windows 7 - all usb devices go to sleep im idle mode

  - by dvdx

  A strange thing happened after a few updates to the system: Intel rapid storage SSD firmware update Intel Ethernet adapter update GPU Intel update When the computer turns off the screen (after 5 min), an unknown time later, all the USB devices stop working. Sound card Mouse Keybord etc. I can't turn them back on, so I can't wake up the screen or do anything except turn the computer off and back on. I checked my power save profile and all is OK there. I changed in the Device Manager, the Allow USB to sleep in all the hubs. How can I fix this??

  Read the article

• nvidia ignores the resolution listed in xorg.conf, even though I have 'nvidia-settings --load-config-only' on startup

  - by ihadanny

  when my machine boots, I see a nice 1920X1080 resolution screen, but the minute I login to my user, it's reverted to an ugly 720Xwhatever. When I run nvidia-settings and select 1920X1080, it's ok again. What am I missing??? my /etc/X11/xorg.conf contains: Section "Screen" ... Option "metamodes" "nvidia-auto-select +0+0; 1920x1080 +0+0" ... EndSection I'm using unity 3.8.16 on ubuntu 11.04, and when I check on gnome-session-properties I see that I have sh -c '/usr/bin/nvidia-settings --load-config-only on my startup.

  Read the article

• Unable to connect to vrde virtualbox VM remotely

  - by b1ackjosh

  So I've remotely created my first headless using ssh. Now I'm attempting to connect to this VM using RDP so I can install Ubuntu Server, but I cannot get connected at all. When starting the VM everything appears fine: $ vboxheadless -s WebTesting Oracle VM VirtualBox Headless Interface 4.0.16 (C) 2008-2012 Oracle Corporation All rights reserved. VRDE server is listening on port 4455. And showvminfo shows: VRDE: enabled (Address 0.0.0.0, Ports 4455, MultiConn: off, ReuseSingleConn: off, Authentication type: null) However I'm still prompted with the "enter your credentials" screen every time I attempt to connect. From reading the documentation null shouldn't prompt me with this screen at all... Any help with this is greatly appreciated. P.S. I am using ssh tunneling in putty to tunnel in to my network.

  Read the article

• Tool to create unscaled call-out from a thumbnail image?

  - by Mal Ross

  I'm creating an online tutorial for some software and need to include screenshots. In particular, I want to highlight the position and appearance of a given control in a large screen. Given that I haven't got the space to show the screen at full resolution (at least, not alongside the tutorial text), I figured I would use a kind of call-out from a thumbnail. Here's my poor first effort, made in Paint.NET: Given how long this took me to craft, I'd really like to find a tool to speed things up (and make them look a little more professional!). Preferably a free one, too - or one that has a downloadable trial. The exact style it produces isn't that important, provided it achieves the desired effect. Can anyone help me out? Thanks, Mal. P.S. I'm using Windows Vista.

  Read the article

• Fun projects to do with an old 17" LCD Monitor

  - by Adam Haile

  I've got an old 17" LCD that I've had for nearly 9 years now but still works pretty well. It's been my secondary monitor for a few years, but I just got a new 24" monitor, so my current main LCD (19") will become the new secondary screen. Any good suggestions of interesting (and preferably cheap/free) hacks, etc. I could do with this old monitor? I don't want to just throw it out. For example, is there an easy way to turn it into a touch screen or something? I'm open to suggestions

  Read the article

• How to get more info out of the uninformative Windows 8 BSoD?

  - by amiregelz

  Windows 8's Blue Screen of Death is different from the previous Windows versions' one: In order to find out what caused the problem you need to write down or remember the search term it presents you with. The two search terms I have seen suggested so far are SYSTEM_SERVICE_EXCEPTION and HAL_INITIALIZATION_FAILED. Both of them are quite generic terms. While it’s nice not to have to look at a blue screen full of text, the previous BSoD was more informative than the Windows 8 BSoD, since it contained a detailed error code (information for diagnostic purposes that was collected as the operating system performed a bug check), which could get you closer to tracking down the root of the problem. How can I get more information about the error Windows 8 has encountered, in order to track down the root of the problem?

  Read the article

< Previous Page | 394 395 396 397 398 399 400 401 402 403 404 405  | Next Page >