Search Results

Search found 30087 results on 1204 pages for 'default package'.

Page 398/1204 | < Previous Page | 394 395 396 397 398 399 400 401 402 403 404 405  | Next Page >

  • Install python-psycopg on Ubuntu 9.10

    - by jack
    How can I install python-psycopg (not python-psycopg2) on Ubuntu 9.10 "apt-get install python-psycopg" returns "Package python-psycopg has no installation candidate" I also downloaded source code at psycopg-1.1.21.tar.gz but didn't found "make" command in the archive.

    Read the article

  • chkconfig creating service symlinks with the wrong order

    - by Robert
    On RHEL 6.3, I have a system service that should be starting after postgresql and httpd (order 64 and 85, respectively), but chkconfig always places it at order 50. I tried an experiment on a CentOS 6.0 virtual machine to make sure I understood the LSB stanza syntax. I created /etc/init.d/foo, owner root, permissions 755, with this text: ### BEGIN INIT INFO # Provides: foo # Required-Start: postgresql httpd # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Description: Foo init script ### END INIT INFO And then ran chkconfig --add foo. Result: /etc/rc5.d/S86foo is created, as expected. (The other runlevels are also as expected.) I repeated the exact same experiment on the RHEL machine, and it created /etc/rc5.d/S50foo instead. I can't see anything different between the two that would lead to different results. Both machines have postgresql and httpd starting at the same orders and runlevels. Any thoughts? I could just use # chkconfig: 2345 86 50, or manually rename the service symlinks to the correct order, but I'm trying to document an install process for later users, and I want to know how to do it right and understand why it's not working as expected.

    Read the article

  • How Can I Make Apache Stop Serving ALL Unknown File Types (like .php~)?

    - by user223304
    I am coming from IIS and moving to Apache and recently found out that Apache by default serves up files of an unknown file extension as PURE TEXT. This can be an issue if a user uses certain programs that back up .php files as .php~. Then the .php~ file becomes completely readable by simply navigating to it in a browser. To make matters worse these .php~ files are often considered 'hidden' in the linux environment from the user so some may not even know they exist. Bots have been created around this fact that scour the internet looking for popular file name backups and extracting potentially secure info from them. I already know how to stop serving up .php~ files or any specific file extensions. I also know not to use any editors that would save backup files like this. My question is, how can I stop this default Apache behavior of serving up ANY non-MIME file type at all? I just don't like the this behavior and would like to stop it. I don't want it serving up .aspx~, .html~, .bob, .carl, no extension or anything else that is not a real MIME type. I know that I can probably go and use a directive to first Deny access to all file types. Then add the ones I want to serve out one by one. But I'm wondering if there's an easier/quicker way. Thanks for any help.

    Read the article

  • Mounting a VirtualBox shared folder on boot with fstab in OpenSuse 11.3

    - by ccook
    I have followed the steps found here, however, the share is not mounted on boot. The share will mount if i run 'mount -a' after booting. Why would the share not mount on boot? 1 - Set up a Virtual Machine and install OpenSUSE 11.2 2 - Create a shared folder on host (HostFolder) 3 - Setup the shared folder in Virtualbox Via the Virtual Machine details or via Devices Shared Folders... 4 - Install dependencies for running the Virtualbox installer You need to install the right development kernelpackage for your machinetype (use 'zypper search -i kernel' to see what's installed) sudo zypper install make gcc kernel-source kernel-hosttype/default-devel 5 - Run the Virtual Machine and go to Devices Guest Additions This mounts an iso image in your OpenSUSE guest. 6 - Open a root terminal and run cd /usr/src/linux make oldconfig && make prepare && make scripts && make dep cp ../linux-obj/$HOSTTYPE/default/Module.symvers . make prepare A commenter on previously mentioned thread says this step is unnecessary but it doesn't work without on my system. I suggest trying step 7 first and returning to step 6 if that fails. * 7 - Run ./VirtualboxLinux yourhosttype .run from the mounted iso image. 8 - Create shared folder in OpenSUSE (GuestFolder) 9 - Test with sudo mount -t vboxsf HostFolder /home/user/GuestFolder It works? Great! Let's set up the system so it automounts for your regular useraccount instead of root-only access. 10 - Add this line to /etc/fstab HostFolder /home/user/GuestFolder vboxsf defaults,uid=1000,gid=1000 0 0 11 - It works for me but if it still doesn't automount after a reboot; sudo mount -a

    Read the article

  • libsasl2 change paths

    - by mk_89
    I have been following the tutorial https://help.ubuntu.com/community/Postfix for installing Postfix on ubuntu. Im stuck at the Authenication section of the tutorial where you change paths to live in the false root, if you look at the link above I have a file (/etc/default/saslauthd) which is pretty much the same as the one from the tutorial. saslauthd # This needs to be uncommented before saslauthd will be run automatically START=yes PWDIR="/var/spool/postfix/var/run/saslauthd" PARAMS="-m ${PWDIR}" PIDFILE="${PWDIR}/saslauthd.pid" # You must specify the authentication mechanisms you wish to use. # This defaults to "pam" for PAM support, but may also include # "shadow" or "sasldb", like this: # MECHANISMS="pam shadow" MECHANISMS="pam" # Other options (default: -c) # See the saslauthd man page for information about these options. # # Example for postfix users: "-c -m /var/spool/postfix/var/run/saslauthd" # Note: See /usr/share/doc/sasl2-bin/README.Debian #OPTIONS="-c" #make sure you set the options here otherwise it ignores params above and will not work OPTIONS="-c -m /var/spool/postfix/var/run/saslauthd" When I run the following command in ubuntu dpkg-statoverride --force --update --add root sasl 755 /var/spool/postfix/var/run/saslauthd I get the following error dpkg-statoverride: warning: An override for '/var/spool/postfix/var/run/saslauthd' already exists, but --force specified so will be ignored. dpkg-statoverride: warning: --update given but /var/spool/postfix/var/run/saslauthd does not exist I don't why this is happening, I literally followed the tutorial step by step and have installed all the packages necessary, what could be the problem? do I have to manually create

    Read the article

  • OpenVPN IPV6 Tunnel Radvd

    - by Arenstar
    Hello.. I have an interesting question regarding ipv6 + openvpn.. My Version is OpenVPN 2.1.1 i have been given a native /64 ipv6 network ( for this example 2001:acb:132:acb::/64 ) The plan was/is, route this block through openvpn and into an office ( for testing purposes ) Soo to explain.. I have a Centos Box as the first linux "router" in a datacenter & a Ubuntu box as the second linux "router" in the office I have created a simple point-to-point tunnel using tun ( based off ipv4 address to start the tunnel ) I have assigned to Centos /sbin/ip addr add fed1::1/128 dev eth0 /sbin/ip addr add fed2::2/128 dev tun0 /sbin/ip route add 2001:acb:132:acb::/64 dev tun0 ## ipv6 Block down the tunnel /sbin/ip route add ::/0 dev eth0 ## Default out to Gateway I have assigned to Ubuntu /sbin/ip addr add fed1::3/128 dev tun0 /sbin/ip addr add fed1::4/128 dev eth0 /sbin/ip route add 2001:acb:132:acb::/64 dev eth0 ## ipv6 Block down to eth0 /sbin/ip route add ::/0 dev tun0 ## Default up the tunnel I have also included on both servers.. sysctl -w net.inet6.ip6.forwarding=1 Looks Good... right??? Wrong.. :( I am not able to ping fed1::1 from fed1::4 (Ubuntu) (can ping :4,:3,:2) However, i can ping fed1::1 fed1::2 from :3 ?????? ( very strange ) I am able to access the internet from any ipv6 interface on the Centos Box but clearly not from the Ubuntu box.. Further, i will eventually run radvd on the Ubuntu box eth0, and autoconf the network with ipv6 address's Anyone with some advice / tips to help me out.. ??? Cheers

    Read the article

  • How do I setup routing for 2 companies with different Internet connections on the same LAN?

    - by Clint Miller
    Here's the setup: 2 companies (A & B) share office space and a LAN. A 2nd ISP is brought in and company A wants it's own Internet connection (ISP A) and company B wants it's own Internet connection (ISP B). VLANs are deployed internally to separate the 2 company's networks (company A: VLAN 1, company B: VLAN 2, shared VOIP: VLAN 3). With separate VLANs it's simple enough to use separate DHCP servers (or separate scopes on the same server) to assign the default gateway to each company's gateway for their Internet connection. Static routes can be created on each gateway to point traffic destined for the other company's VLAN or the voice VLAN so that all nodes are reachable as expected. However, I think this is a form of asymmetrical routing, right? (The path from node A1 to node B1 is not the same as the path back from node B1 to node A1). Can I setup policy-based routing to correct this? In that case, can I assign the same default gateway to every device on all VLANs and create a routing policy on a L3 switch to look at the source address and forward traffic to the appropriate next hop? In that case, I want the routing logic to go like this: If the destination address is known, forward the traffic (traffic destined for a different VLAN). If the destination address is unknown, forward the traffic to ISP A's gateway if the source address is on VLAN A; or forward the traffic to ISP B's gateway if the source address is VLAN B. Am I thinking about this problem in the correct way? Is there another way to solve this problem that I am overlooking?

    Read the article

  • Accessing MySQL server via VPN in python

    - by user210481
    Hi I have a MySQL server that I need access through a VPN. I use MySQLdb package to access MySQL server in Python. When I can access the server without VPN, it works fine, but when I'm at certain locations, I need to connect through VPN. My computer is connected to the VPN and I can access the database through PHPMyAdmin, but MySQLdb gives me an error message: OperationalError: (2003, "Can't connect to MySQL server on 'MY_IP' (10061)") Any ideas on why it's not working? Thanks

    Read the article

  • management network to a network port for additional ones munin and monit

    - by paolo
    management network to a network port for additional ones munin and monit I want to build a separate Netzwek for server management. I have several network cards a linux / debian / ubuntu with computer. Set both network cards sin in the /etc/network/interfaces. # The primary network interface #allow-hotplug eth0 #iface eth0 inet dhcp auto eth0 iface eth0 inet static address 10.0.0.240 netmast 255.255.255.0 network 10.0.0.0 brodacast 10.0.0.255 gateway 10.0.0.254 auto eth1 iface eth1 inet static address 10.0.10.240 netmast 255.255.255.0 network 10.0.10.0 brodacast 10.0.10.255 post-up ip route add 10.0.0.0/24 dev eth0 src 10.0.0.240 table eth0-WAN post-up ip route add default via 10.0.0.254 table eth0-WAN post-up ip route add 10.0.10.0/24 dev eth1 src 10.0.10.240 table eth1-LAN post-up ip route add default via 10.0.10.200 table eth1-LAN post-up ip rule add from 10.0.0.240 table eth0-WAN post-up ip rule add from 10.0.10.240 table eth1-LAN still i adjusted / etc/iproute2/rt_tables and following routes set up in the /etc/network/interfaces I want to have both applications and the network interface separately as munin and monit only on eth1 and not have to eth0. it goes to the reboot but sometimes not always. # Traceroute-i eth1 10.0.10.200 not go what am I doing wrong?

    Read the article

  • Disappearing Arial on 2 Macs

    - by drewk
    I noticed that Safari started rendering common web pages in a funny manner on two different Macs that I have. One is a Macbook Pro and the other a Mac Pro desktop. Yahoo and Google would appear all excessively bold or all italic and not at all look right or acceptable. The computers are all running OS X 10.6.3 "Snow Leopard" Turns out that "Arial.TTF" and "Arial Bold.ttf" got deleted somehow on these two computers. I restored Arial through Font Book and got my web mojo back. So questions: 1) Anyone seen "arial" strangely randomly disappear? The only thing in common is these are the only two computers out of eight on site that recently got Adobe CS 5 installed. Has anyone had CS 5 delete arial? 2) When I restored arial with font book, it goes into User fonts rather than the All fonts. Can I use Font Book to restore a font in /System/Library/Fonts or do I need to do that manually? 3) I located THIS article on the web regarding OS X fonts. Essentially, Snow Leopard did away with the older .dfont format and replaced with open True Type. There is a minimum font list, but Arial is not among them. Arial is installed by MS Office. 4) Why are web sites affected by Arial being missing anyway? If I look at the HTML source for Yahoo for example, "arial" is specified by name only in an ad. Yahoo itself does not specify a font name. In my Safari preferences, I have Times and Courier specified as the default font which is the default for Safari when installed. How does a missing Arial screw things up anyway? Thanks in advance.

    Read the article

  • What's the best way to run Drupal and Django sites behind the same Varnish server?

    - by Alexis Bellido
    I have a high traffic website running with Drupal and Apache, five web servers behind a Varnish server load balancing. Let's say this site is example.com. I'm using five backends and a director like this in my default.vcl: director balancer round-robin { { .backend = web1; } { .backend = web2; } { .backend = web3; } { .backend = web4; } { .backend = web5; } } Now I'm working on a new Django project that will be a new section of this site running on example.com/new-section. After checking the documentation I found I can do something like this: sub vcl_recv { if (req.url ~ "^/new-section/") { set req.backend = newbackend; } else { set req.backend = default; } } That is, using a different backend for a subdirectory /new-section under the same domain. My question is, how do I make something like this work with my director and load balancing setup? I'm probably going to run two or more web servers (backends) with my new Django project, each one with a mix of Gunicorn, Nginx, and a few Python packages, and would like to put all of those in their own Varnish director to load balance. Is it possible to do use the above approach to decide which director to use?, like this: sub vcl_recv { if (req.url ~ "^/new-section/") { set req.director = newdirector; } else { set req.director = balancer; } } All suggestions welcome. Thanks!

    Read the article

  • Traffic shaping on Linux with HTB: weird results

    - by DADGAD
    I'm trying to have some simple bandwidth throttling set up on a Linux server and I'm running into what seems to be very weird stuff despite a seemingly trivial config. I want to shape traffic coming to a specific client IP (10.41.240.240) to a hard maximum of 75Kbit/s. Here's how I set up the shaping: # tc qdisc add dev eth1 root handle 1: htb default 1 r2q 1 # tc class add dev eth1 parent 1: classid 1:1 htb rate 75Kbit # tc class add dev eth1 parent 1:1 classid 1:10 htb rate 75kbit # tc filter add dev eth1 parent 1:0 protocol ip prio 1 u32 match ip dst 10.41.240.240 flowid 1:10 To test, I start a file download over HTTP from the said client machine and measure the resulting speed by looking at Kb/s in Firefox. Now, the behaviour is rather puzzling: the DL starts at about 10Kbyte/s and proceeds to pick up speed until it stabilizes at about 75Kbytes/s (Kilobytes, not Kilobits as configured!). Then, If I start several parallel downloads of that very same file, each download stabilizes at about 45Kbytes/s; the combined speed of those downloads thus greatly exceeds the configured maximum. Here's what I get when probing tc for debug info [root@kup-gw-02 /]# tc -s qdisc show dev eth1 qdisc htb 1: r2q 1 default 1 direct_packets_stat 1 Sent 17475717 bytes 1334 pkt (dropped 0, overlimits 2782 requeues 0) rate 0bit 0pps backlog 0b 12p requeues 0 [root@kup-gw-02 /]# tc -s class show dev eth1 class htb 1:1 root rate 75000bit ceil 75000bit burst 1608b cburst 1608b Sent 14369397 bytes 1124 pkt (dropped 0, overlimits 0 requeues 0) rate 577896bit 5pps backlog 0b 0p requeues 0 lended: 1 borrowed: 0 giants: 1938 tokens: -205561 ctokens: -205561 class htb 1:10 parent 1:1 prio 0 **rate 75000bit ceil 75000bit** burst 1608b cburst 1608b Sent 14529077 bytes 1134 pkt (dropped 0, overlimits 0 requeues 0) **rate 589888bit** 5pps backlog 0b 11p requeues 0 lended: 1123 borrowed: 0 giants: 1938 tokens: -205561 ctokens: -205561 What I can't for the life of me understand is this: how come I get a "rate 589888bit 5pps" with a config of "rate 75000bit ceil 75000bit"? Why does the effective rate get so much higher than the configured rate? What am I doing wrong? Why is it behaving the way it is? Please help, I'm stumped. Thanks guys.

    Read the article

  • nginx: how do I add new site/server_name in nginx?

    - by Neo
    I'm just starting to explore Nginx on my Ubuntu 10.04. I installed Nginx and I'm able to get the "Welcome to Nginx" page on localhost. However I'm not able to add a new server_name, even when I make the changes in site-available/default file. Tried reloading/restarting Nginx, but nothing works. One interesting observation. "http://mycomputername" in browser works. So somehow there is a command like 'server_name $hostname' somewhere over-riding my rule. File: sites-available/mine.enpass server { listen 80; server_name mine.enpass ; access_log /var/log/nginx/localhost.access.log; location / { root /var/www/nginx-default; index index.html index.htm; } } File: nginx.confg user www-data; worker_processes 1; error_log /var/log/nginx/error.log; pid /var/run/nginx.pid; events { worker_connections 1024; # multi_accept on; } http { include /etc/nginx/mime.types; access_log /var/log/nginx/access.log; sendfile on; #tcp_nopush on; #keepalive_timeout 0; keepalive_timeout 65; tcp_nodelay on; gzip on; gzip_comp_level 2; gzip_proxied any; gzip_types text/plain text/css application/x-javascript text/xml application/xml application/xml+rss text/javascript; gzip_disable "MSIE [1-6]\.(?!.*SV1)"; include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; }

    Read the article

  • How to add GD to a PHP 5.3 CentOS installation from a different repo?

    - by Mauro
    I installed PHP 5.3 on a CentOS 5.3 using yum and repos from Webtatic (http://www.webtatic.com/packages/php53/) and now I'd like to add the GD library to that installation but Webtatic seems to be offline. Now: # yum install php-gd Fails of course (not the same PHP version) into: *Error: Missing Dependency: php-common = 5.1.6-27.el5_5.3 is needed by package php-gd-5.1.6-27.el5_5.3.x86_64* And: # yum install php53-gd Fails into Error: php53-common conflicts with php-common How can I add the GD libraries now?

    Read the article

  • Laptop kicks other users off the wifi when it connects, then gets disconnected itself

    - by Devon
    I've got an Acer Aspire One running Linux. When I connect to my building's wifi, everything seems fine for a short period of time (I can google a few things or start downloading an Apt package), but then other devices on the network lose their IP addresses. Shortly after that, my computer also gets disconected. My computer is set to use DHCP. What causes this, and do you know how it could be fixed? Am I causing a broadcast storm?

    Read the article

  • Chrome for Linux doesn't display pdf's

    - by Grzenio
    Hi, I am using latest chrome package for Debian and it doesn't seem to handle acrobat plugin correctly - when I open a pdf there is just nothing on the screen (kind of dark grey colour). How can I configure it to load acrobat correctly?

    Read the article

  • Getting an alert when my oracle database goes up or down

    - by CodeSlave
    How can I get an e-mail alert when my oracle database comes up or down? I have a database that I need to know when it goes down (it would be nice to know if it has come back up), preferably from a remote machine. Conceivably I could hack together something that TNSPings my DB and e-mails me when that changes, but I'm hoping there's a free package out there. Something that would run on windows. Any strong recommendations?

    Read the article

  • iperf max udp multicast performance peaking at 10Mbit/s?

    - by Tom Frey
    I'm trying to test UDP multicast throughput via iperf but it seems like it's not sending more than 10Mbit/s from my dev machine: C:\> iperf -c 224.0.166.111 -u -T 1 -t 100 -i 1 -b 1000000000 ------------------------------------------------------------ Client connecting to 224.0.166.111, UDP port 5001 Sending 1470 byte datagrams Setting multicast TTL to 1 UDP buffer size: 8.00 KByte (default) ------------------------------------------------------------ [156] local 192.168.1.99 port 49693 connected with 224.0.166.111 port 5001 [ ID] Interval Transfer Bandwidth [156] 0.0- 1.0 sec 1.22 MBytes 10.2 Mbits/sec [156] 1.0- 2.0 sec 1.14 MBytes 9.57 Mbits/sec [156] 2.0- 3.0 sec 1.14 MBytes 9.55 Mbits/sec [156] 3.0- 4.0 sec 1.14 MBytes 9.56 Mbits/sec [156] 4.0- 5.0 sec 1.14 MBytes 9.56 Mbits/sec [156] 5.0- 6.0 sec 1.15 MBytes 9.62 Mbits/sec [156] 6.0- 7.0 sec 1.14 MBytes 9.53 Mbits/sec When I run it on another server, I'm getting ~80Mbit/s which is quite a bit better but still not anywhere near the 1Gbps limits that I should be getting? C:\> iperf -c 224.0.166.111 -u -T 1 -t 100 -i 1 -b 1000000000 ------------------------------------------------------------ Client connecting to 224.0.166.111, UDP port 5001 Sending 1470 byte datagrams Setting multicast TTL to 1 UDP buffer size: 8.00 KByte (default) ------------------------------------------------------------ [180] local 10.0.101.102 port 51559 connected with 224.0.166.111 port 5001 [ ID] Interval Transfer Bandwidth [180] 0.0- 1.0 sec 8.60 MBytes 72.1 Mbits/sec [180] 1.0- 2.0 sec 8.73 MBytes 73.2 Mbits/sec [180] 2.0- 3.0 sec 8.76 MBytes 73.5 Mbits/sec [180] 3.0- 4.0 sec 9.58 MBytes 80.3 Mbits/sec [180] 4.0- 5.0 sec 9.95 MBytes 83.4 Mbits/sec [180] 5.0- 6.0 sec 10.5 MBytes 87.9 Mbits/sec [180] 6.0- 7.0 sec 10.9 MBytes 91.1 Mbits/sec [180] 7.0- 8.0 sec 11.2 MBytes 94.0 Mbits/sec Anybody has any idea why this is not achieving close to link limits (1Gbps)? Thanks, Tom

    Read the article

  • How to leave the open file in eclipse tab after search?

    - by Foolish
    when we open a file from "Package Explorer" in eclipse, after we use it, it will leave in the tabs. If we open a file from "Search" result, then after we search another keyword, it will disappear, we need to see the search result to find out that. Is there any solution that I can leave the opened tab in the tabs after I opened from Search panel ?

    Read the article

  • How do I identify resource hogs on Firefox?

    - by Tarrasch
    I have installed a package of Firefox extensions that installed a few extensions to my Firefox. Recently I have noticed, that the resource consumption of the Firefox process rose to unacceptable levels for my rather weak Laptop. How can I identify the add-ons responsible for this? I do not want to uninstall all the add-ons since I think some of them really make my life easier. Is there a way to profile my Firefox plugins, preferably over a period of time?

    Read the article

  • CentOS Latency High Troubleshooting

    - by Sarah Weinberger
    I have two CentOS servers connected via a 10 Gb fiber optic cable with a network emulator connected between them. All three units sit on a desk in the lab. There is also a regular 1 Gbit Ethernet cable connected to each of the machines, which provide internet connectivity. When I set the latency to something roughly below 30 ms, all is fine. When the latency gets to 70ms and above, and definitely 130ms, the network layer suspends. For instance, if I set the latency (delay) to 70ms, then launching TeamViewer (or any other application that uses network connectivity) never happens or does not work. There is no timeout message, simply no response. I have to lower to latency back down to zero to see any response and have the box start working. What is the problem and how would I go about fixing it? It seems to me some sort of setting in Linux causes one of the CentOS networking drivers to sit in an infinite loop or something. eth0 is the connection to the internet, all settings are default eth2 is the 10 Gbit fiber optic connection to the other computer with the MTU set to 9600 with all other parameters at default values.

    Read the article

  • Ubuntu 10.04 RGBA(Transparent theme) bug

    - by Nrew
    I tried to follow this tutorial frome ghacks.net. But I end up with a bug. Everytime I try to change the desktop background or the theme. It opens up lots of folders. And then close it back again. So I cannot do anything when I try to change the background or the theme to the default. Here is the tutorial And I can't even shutdown my machine now, please help. EDIT I tried executing these commands in the terminal sudo add-apt-repository ppa:erik-b-andersen/rgba-gtk sudo apt-get update && sudo apt-get upgrade sudo apt-get install gnome-color-chooser gtk2-module-rgba sudo apt-get install murrine-themes And it installed gnome color changer. It works, and the windows became transparent, but I can't change to the default theme and I can't put a background Here's the screenshot, when I try to change something in the preferences: Its just okay if I can't change the theme, but it won't let me change the background either. Or maybe the background is changed but its transparent just like the other windows. You can see that in the taskbar(or whatever its called in Ubuntu). Its full. What can I do to atleast make the background visible.

    Read the article

  • How to Load Balance 2 Internet Connections on a Windows 7 machine?

    - by Jimmy Chandra
    It's sort of related to this particular question, but that one is on Mac. I am looking for similar solution on Windows 7. I have 2 network connections: (Connection A) Wireless terminal connecting to ISP A (3G / EVDO internet provider) (Connection B) Broadband wired connection connecting to ISP B (Cable internet provider) Both has access to the internet. When I try connecting to a website and checking the networking tab on my Task Manager, I only see the network traffic being routed to only Connection A. Is there a way to make the computer to utilize both network (in a sense using all the bandwidth available from both the Cable ISP and the 3G / EVDO ISP) at the same time? If so, what do I need to do to set this up ... on Windows 7? Here is a bit more info on my network connections (ipconfig /all): PPP adapter Wireless Terminal: IPv4: aa.bb.ccc.ddd(preferred) Subnet mask: 255.255.255.255 Default Gateway: 0.0.0.0 DNS: aa.ee.f.ggg aa.ee.f.hhh Primary Wins: jjj.ii.k.l Secondary Wins: jjj.ii.k.m Ethernet adapter LAN: IPv4: 192.168.1.100 (connected to a router by wired that itself connect to a cable modem) subnet mask: 255.255.255.0 Default gateway: 192.168.1.1 (the wireless router) DHCP: 192.168.1.1 (the wireless router) DNS: xxx.yy.zz.ww rr.sss.t.uuu For my own privacy, I don't believe the actual number matters, the patterns are representative of the ip numbering scheme...

    Read the article

  • Plesk: Spamassassin ignores emails to redirected accounts

    - by Mat
    When I set up email redirects within Plesk 9.5, Spamassassin ignores all emails sent to the redirected address and only scans emails that are sent directly to the address which has a mailbox. Steps to reproduce Set up two mail accounts: [email protected] as a proper email account with a mailbox and [email protected] with all emails redirected to [email protected]. (It doesn't make a difference, if [email protected] has a mailbox enabled or not.) [email protected] -> [email protected] Set up the spam filter on both accounts. I set mine to delete spam right away, but you can just keep the default ("mark as spam"). Now, when you send an emails to [email protected], it will have Spamassassins tags in the email header, but when you send emails to [email protected], they will end up in the same mailbox but will have no spamassassin tags in the emails header and they will not be scanned. Other notes I am using Plesk 9.5.4 on Ubuntu 8.04 LTS with the default Qmail. I've observed this bug since Plesk 8, but I can't stand it any more and would appreciate any hack or fix.

    Read the article

< Previous Page | 394 395 396 397 398 399 400 401 402 403 404 405  | Next Page >