Search Results

Search found 25039 results on 1002 pages for 'machine learning'.

Page 398/1002 | < Previous Page | 394 395 396 397 398 399 400 401 402 403 404 405  | Next Page >

• 10 GigE interfaces limits single connection throughput to 1 Gb on a ProCurve 4208vl

  - by wazoox

  The setup is as follow : 3 Linux servers with Intel CX4 10 GigE controllers and an X-Serve with a Myricom 10 GigE CX4 controller are connected to a ProCurve 4208vl switch, with a myriad of other machines connected through good ol' 1000 base-T. The interfaces are actually set up as 10 Gig, according to both the switch monitoring interface and the servers (ethtool, etc). However a single connection between two 10 GigE equipped machines through the switch is limited to exactly 1Gb. If I connect two of the 10 GigE machines directly with a CX4 cable, netperf reports the link bandwidth as 9000 Mb/s. NFS achieves about 550 MB/s transfers. But when I'm using the switch, the connection tops at 950 Mb/s through netperf and 110 MB/s with NFS. When I open several connections from 3 of the machines to the 4th, I get 350 MB/s of NFS transfer speed. So each individual 10 GigE ports actually can reach much more than 1 Gb, but individual connections are strictly limited to 1 Gb. Conclusion : the 10 GigE connection through the switch behaves exactly like a trunk of 10 1 Gb connections. That doesn't make any sense to me, unless HP planned these ports only for cascading switches or strictly for many-clients-to-single-server connection. Unfortunately this is NOT the envisioned setup, we need big throughput from machine to machine. Is this a not-so-known (or carefully hidden...) limitation of this type of switch? Should I suggest seppuku to the HP representative? Does anyone have any idea on how to enable a proper behaviour ? I upgraded for an hefty price from bonded 1Gb links to 10 GigE and see exactly ZERO gain! That's absolutely unacceptable.

  Read the article

• Network card/driver stops under heavy load

  - by Uwe Keim

  Since about approx. 2 month, I do have the following issue with my approx. 1 year old development machine (Windows 7, 64 bit): When doing network intensive operations, like e.g. executing some SQL script on a remote SQL server to select or update 1000 of records, the network card stops working. I.e. suddenly, No network connection is present anymore. No internet, no local connection, simply nothing. The only resolution so far I found is to disable my network card and then simply enable it back, like in the following screenshots: 1.) Click "Deactivate" 2.) Click "Activate" (German screenshots only, sorry) Now this is an acceptable solution to work around this issue, but I would love to have this fixed, since it suddenly stops me from working when I'm connected remotely via VPN/RDP on my machine (Win7 64bit). So my question is: Could you imagine a possible cause for this issue and give some hints how to hunt/resolve it? I could imagine that this is a driver issue, a hardware issue or even some kind of background software issue like a software firewall or a virus scanner.

  Read the article

• Is Cloud Print to blame for my inability to print?

  - by VarLogRant

  I have just moved to the Chrome beta (first 9.something and currently 10.0.648.127) on my Windows 7 64-bit machine, and my good web browsers (Firefox Beta and Chrome) can no longer print, and neither can Komodo Edit. The problem seems to have started when I tried to enable Google Cloud Print. Frustratingly, I can still print from IE 9 RC, and also from other machines in the office, which means the problem is entirely on this Windows machine. When I try to print from Chrome, first time I get the printer dialog, and once I click print, it waits, then pops up "Something went wrong", and each time after, it pops up with "No Printer Found". Under Firefox, I get "An unknown error occurred while printing", as does Komodo. I have printed from these applications before, and have even printed from Google Cloud Print. Once. But then it stopped. I really don't know where to go next in debugging this thing, and the Google results I see tend to be from 2007. I'm not ready for the paperless office yet, so please help!

  Read the article

• Setting Up My Home Network

  - by Skizz

  I currently have five PCs at home, three running WinXP and two running Ubuntu. They are set up like this: ISP ----- Modem ---- Switch ---- Ubuntu1 -- B&W Printer | |--WinXP1 | |--WinXP2 Wireless |--Colour Printer | |---------Ubuntu2 |---------WinXP3 (laptop) The Ubuntu1 machine is set up as a PDC using Samba and runs fetchmail, procmail, dovecot to get my e-mail and allow me to access the e-mail via imap so I can read the e-mail on any PC. I'd like to set up the network like this: ISP ----- Modem ---- Ubuntu1 ---- Switch ------WinXP1 | | |--WinXP2 B&W Printer Wireless |--Colour Printer | |---------Ubuntu2 |---------WinXP3 (laptop) My questions are: How to configure Ubuntu1 to act as a firewall. How to configure Ubuntu1 to provide a consistant user authentication across the network, at the moment Samba provides roaming profiles for the XP machines but the Ubuntu2 machine has it's own user lists. I'd like to have a single authentication for both XP machines and linux machines so that users added to the server list will propagate to all PCs (i.e. new users can log on using any PC without modifying any of the client PCs). How to configure a linux client (Ubuntu2 above) to access files on the server (Ubuntu1), some of which are in user specific folders, effectively sharing /home/{user} per user (read and write access) and stuff like /home/media/photos with read access for everyone and limited write access. How to configure the XP machines (if it is different from a the Samba method). How to set up e-mail filtering. I'd like to have a whitelist/blacklist system for incoming e-mails for some of the e-mail accounts (mainly, my kids' accounts) with filtered e-mails being put into quaranteen until a sysadmin either adds the sender to a blacklist or whitelist. OK, that's a lot of stuff. For now, I don't want config files*, rather, what services / applications to use and how they interact. For example, LDAP could be used for authentication but what else would be useful to make the administration of the LDAP easier. Once I have a general idea for the overall configuration, I can ask other questions about the specifics. Skizz I have looked around for information, but most answers are usually in the form of abstract config files and lists of packages to install.

  Read the article

• Change the Powershell $profile directory

  - by Swoogan

  I would like to know how to change my the location my $profile variable points to. PS H:\> $profile H:\WindowsPowerShell\Microsoft.PowerShell_profile.ps1 H:\ is a network share, so when I create my profile file, and load powershell I get the following: Security Warning Run only scripts that you trust. While scripts from the Internet can be useful, this script can potentially harm your computer. Do you want to run H:\WindowsPowerShell\Microsoft.PowerShell_profile.ps1? [D] Do not run [R] Run once [S] Suspend [?] Help (default is "D"): According to Microsoft, the location of the $profile is determined by the %USERPROFILE% environment variable. This is not true: PS H:\> $env:userprofile C:\Users\username For example, I have an XP machine working how I want: PS H:\> $profile C:\Documents and Settings\username\My Documents\WindowsPowerShell\Microsoft.PowerShell_profile.ps1 PS H:\> $env:userprofile C:\Documents and Settings\username PS H:\> $env:homedrive H: PS H:\> $env:homepath \ Here's the same output from the Vista machine where the $profile points to the wrong place: PS H:\> $profile H:\WindowsPowerShell\Microsoft.PowerShell_profile.ps1 PS H:\> $env:userprofile C:\Users\username PS H:\> $env:homedrive H: PS H:\> $env:homepath \ Since $profile isn't actually determined by %USERPROFILE% how do I change it? Clearly anything that involves changing the homedrive or homepath is not the solution I'm looking for.

  Read the article

• Restoring Windows 2008 Server X86 and X64

  - by rihatum

  Restoring Windows 2008 Server (Domain Controller) We are using Backup Exec System Recovery 2010 to Image our DC. Now this software has a feature to convert the backup into a vmware or hyper-v VM I have also used disk2vhd to convert one of our dc's to a vhd and when I connected it into Hyper-V, it booted fine, I can login - BUT :-) As soon as I login, I get the activation error, that change product key, this product key isn't good for this machine etc. Question is : When in a real recovery situation, what would be the procedure to restore it either virtual or onto a physical box but be able to login and change product key etc ? In this scenario its just locked down and I cant' do anything, if this is the case, how would I replicate my production environment via these tools ? Any Ideas ? Will be grateful for some real world examples here. Same thing happens with our exchange backup / test restore either physical or virtual, can login but nothing else. Now we don't have the keys as they are OEM keys and just wondering what will happen in a real scenario, would we be purchasing another KEY or using the OEM key on our new server ? This is a test environment I am trying to create by restoring our backups either into hyper-v or physical test machines. Also, If I build up a machine (Server 2008) in a VM (Hyper-V), How can I restore just the system state backup of my DC into it ? will that give me the activation error too ? even though I would use the TRIAL ISOs provided by Microsoft ? Kind regards

  Read the article

• How to connect a USB GDI printer to Linux over a D-Link print server?

  - by jpe

  The setup is the following: +------------+ +-----------------+ +---------+ | HP LJ P1005|--USB--| D-Link DPR-1020 |---LAN---| PC Linux| +------------+ +-----------------+ + +---------+ | +------------+ +--| PC Windows | +------------+ HP LJ P1005 is one of those GDI printers that requires the printer driver to do most of the work for it and therefore is a bit "special". D-Link DPR-1020 is a print server with an Ethernet and an USB port that actually supports printing to challenged (read GDI) printers using a utility called PS-Link. What the utility does is basically mirror a USB port over the network to the print server so that the printer driver and the printer both are happy to talk to each other. The PC-s are notebooks that come and go, i.e. are not there all the time. Is there an equivalent of the D-Link PS-Link utility for Linux that could mirror a USB port over the network for a Linux host? And can the solution be used with D-Link DPR-1020? If not then I basically wasted the money buying the print server because the goal was to share a small printer among a couple of users with diverse operating systems in an office. The print server specs say that it supports Linux and LJ P1005, but the Catch 22 appears to be the solution used for GDI printers... It should be noted that it is possible to print from Linux to LJ P1005 directly over USB. This far sharing involved reconnecting the USB cable to appropriate computer to print. Now one of the desks is separated, so the cable does not work. Searching the net did not yield anything useful. Please do not suggest solutions involving a Windows machine (either virtual or not), my question is whether a solution only involving a Linux machine exists.

  Read the article

• Migrating to Windows Server 2008 R2 Domain Controllers - a few Questions/Issues

  - by Chris

  Ok so here's our setup: We have 2 Windows 2003 Domain Controllers. I am trying to replace them with Windows 2008 R2. The 2003 servers are named DC01 and DC02. The 2008 R2 servers are DC1 and DC2. I prepared the Windows Server 2003 Forest Schema for a Domain Controller that runs Windows Server 2008 or Windows Server 2008 R2. Then with both of the new servers up as member servers I ran dcpromo on DC1 using the advanced option and added it successfully to my existing domain. It's roles are GC, DNS and Active Directory Domain Services. I transferred The PDC Emulator, RID Pool Manager, and Infrastructure Master roles to DC1. The Schema Master and Domain Naming master are still on DC01. The first issue that I'm encountering is when I dcpromo the DC2 and select "Replicate data over the network from and existing domain controller" I select that I want to replicate from DC1 and I get the following error: Failed to identify the requested replica partner (dc1.xxx.org) as a valid domain controller with a machine account for (DC2$). This is likely due to either the machine account not being replicated to this domain controller because of replication latency or the domain controller not advertising the Active Directory Domain Services. Please consider retrying the operation with \dc01.xxx.org as the replica partner. "The server is unwilling to process the request. Is this because the Schema Master and Domain Naming Master roles are still on the old DC01? And if so, if I transfer Schema Master and Domain Naming Master roles to DC1 what is the risk or breaking my AD? I'm a little paranoid because this process HAS to be transparent. ANY down time or interruption will result in me getting a verbal ass kicking from my I.T. Director. Both of the new servers DNS point the the old DNS servers (DC01 and DC02) not themselves by the way.

  Read the article

• Python not Working in Vim

  - by jdg

  I have a new install of VIM from the automatic windows installer: gvim73_46.exe I have Python 2.7 (32 bit) installed. If I open gvim, and type: :set python? I get E518: Unknown option. If I try typing: :python 'hello' Vim crashes. What could be wrong? Here are the contents of :version in case they are helpful, although python is installed, and it is using Python 2.7. I also checked, and C:\Windows\System32\python27.dll is where it should be... I am really lost here. Does anyone have any ideas as to what is going wrong? VIM - Vi IMproved 7.3 (2010 Aug 15, compiled Oct 27 2010 17:59:02) MS-Windows 32-bit GUI version with OLE support Included patches: 1-46 Compiled by Bram@KIBAALE Big version with GUI. Features included (+) or not (-): +arabic +autocmd +balloon_eval +browse ++builtin_terms +byte_offset +cindent +clientserver +clipboard +cmdline_compl +cmdline_hist +cmdline_info +comments +conceal +cryptv +cscope +cursorbind +cursorshape +dialog_con_gui +diff +digraphs -dnd -ebcdic +emacs_tags +eval +ex_extra +extra_search +farsi +file_in_path +find_in_path +float +folding -footer +gettext/dyn -hangul_input +iconv/dyn +insert_expand +jumplist +keymap +langmap +libcall +linebreak +lispindent +listcmds +localmap -lua +menu +mksession +modify_fname +mouse +mouseshape +multi_byte_ime/dyn +multi_lang -mzscheme +netbeans_intg +ole -osfiletype +path_extra +perl/dyn +persistent_undo -postscript +printer -profile +python/dyn +python3/dyn +quickfix +reltime +rightleft +ruby/dyn +scrollbind +signs +smartindent -sniff +startuptime +statusline -sun_workshop +syntax +tag_binary +tag_old_static -tag_any_white +tcl/dyn -tgetent -termresponse +textobjects +title +toolbar +user_commands +vertsplit +virtualedit +visual +visualextra +viminfo +vreplace +wildignore +wildmenu +windows +writebackup -xfontset -xim -xterm_save +xpm_w32 system vimrc file: "$VIM\vimrc" user vimrc file: "$HOME_vimrc" 2nd user vimrc file: "$VIM_vimrc" user exrc file: "$HOME_exrc" 2nd user exrc file: "$VIM_exrc" system gvimrc file: "$VIM\gvimrc" user gvimrc file: "$HOME_gvimrc" 2nd user gvimrc file: "$VIM_gvimrc" system menu file: "$VIMRUNTIME\menu.vim" Compilation: cl -c /W3 /nologo -I. -Iproto -DHAVE_PATHDEF -DWIN32 -DFEAT_CSCOPE -DFEAT_NETBEANS_INTG -DFEAT_XPM_W32 -DWINVER=0x0400 -D_WIN32_WINNT=0x0400 /Fo.\ObjGOLYHTR/ /Ox /GL -DNDEBUG /Zl /MT -DFEAT_OLE -DFEAT_MBYTE_IME -DDYNAMIC_IME -DFEAT_GUI_W32 -DDYNAMIC_ICONV -DDYNAMIC_GETTEXT -DFEAT_TCL -DDYNAMIC_TCL -DDYNAMIC_TCL_DLL=\"tcl83.dll\" -DDYNAMIC_TCL_VER=\"8.3\" -DFEAT_PYTHON -DDYNAMIC_PYTHON -DDYNAMIC_PYTHON_DLL=\"python27.dll\" -DFEAT_PYTHON3 -DDYNAMIC_PYTHON3 -DDYNAMIC_PYTHON3_DLL=\"python31.dll\" -DFEAT_PERL -DDYNAMIC_PERL -DDYNAMIC_PERL_DLL=\"perl512.dll\" -DFEAT_RUBY -DDYNAMIC_RUBY -DDYNAMIC_RUBY_VER=191 -DDYNAMIC_RUBY_DLL=\"msvcrt-ruby191.dll\" -DFEAT_BIG /Fd.\ObjGOLYHTR/ /Zi Linking: link /RELEASE /nologo /subsystem:windows /LTCG:STATUS oldnames.lib kernel32.lib advapi32.lib shell32.lib gdi32.lib comdlg32.lib ole32.lib uuid.lib /machine:i386 /nodefaultlib gdi32.lib version.lib winspool.lib comctl32.lib advapi32.lib shell32.lib /machine:i386 /nodefaultlib libcmt.lib oleaut32.lib user32.lib /nodefaultlib:python27.lib /nodefaultlib:python31.lib e:\tcl\lib\tclstub83.lib WSock32.lib e:\xpm\lib\libXpm.lib /PDB:gvim.pdb -debug

  Read the article

• How to configure CISCO switch 2960 for port-based address allocation on a single port only?

  - by Jack

  CISCO 2960 allows you to configure so-called Port-Based address allocation. It makes the switch to associate IP address it is giving out via DHCP with port-identifier, which is random, switch created identifier. In practice it means that any machine connected to such configured port will always get the same IP address, regardless of what that machine's MAC address is. I want to have that feature configured on --some ports-- only. But no matter what commands I try it seems that this can only be done for all ports, all for none. Even though CISCO manual seems to indicate there's both global and per-port command to enable that. Here are relevant commands from CISCO manual: configure terminal ip dhcp use subscriber-id client-id (this configures the DHCP server to globally use the subscriber ID as the client ID on all incoming DHCP messages) interface FastEthernet0/1 ip dhcp server use subscriber-id client-id (Optional: Configures the DHCP server to use the subscriber ID as the client ID on all incoming DHCP messages on the interface) but it appears if I configure only per-interface than there's no effect at all, if I configure globally and per interface - CISCo behaves as if all ports were configured to use that feature. Any ideas?

  Read the article

• Loading a big database dump into PostgreSQL using cat

  - by RussH

  I have a pair of very large (~17 GB) database dumps that I want to load into postgresql 9.3. After installing the database packages, learning more or less how to use them, and fiddling around a little on various StackExchange pages (particularly this question), it looks like a proper command for me to use is something like: cat mydb.pgdump | psql mydb because of the format the dump is in. My machine has 16 GB of RAM, and I'm not familiar with the cat command but I do know that my RAM is 99% exhausted and the database is taking a while to load. My machine isn't non-responsive to the point of hanging; I can run other commands in other terminal windows and have them execute at a reasonable clip, but I am wondering if cat is the best way to pipe in the file or if something else is more efficient? My concern is that maybe cat could be using up all the RAM so the database doesn't have much to work with, throttling its performance. But I'm new to thinking about RAM issues like this and don't know if I'm worrying about nothing. Now that I think about it, this seems to be more of a question about cat and its memory usage than anything else. If there is a more appropriate forum for this question please let me know. Thanks!

  Read the article

• IPSec tunnelling with ISA Server 2000...

  - by Izhido

  Believe it or not, our corporate network still uses ISA Server 2000 (in a Windows Server 2003 machine) to enable / control Internet access to / from it. I was asked recently to configure that ISA Server to create a site-to-site VPN for a new branch in a office about 25 km. away from it. The idea is basically to enable not only computers, but also Palm devices (WiFi-enabled, of course), to be able to see other computers in both sites. I was also told that a simple VPN-enabled wireless AP/router (in this case, a Cisco WRV210 unit) should be enough to establish communications with the main office. To be fair, the router looks easy to configure; it was confusing at first, but further understanding of how site-to-site VPNs work cleared all doubts about it. Now I need to make modifications to our ISA Server in order to recognize the newly installed & configured "remote" VPN site. Thing is, either my Googling skills are pathethically horrible, or there doesn't seem to be much (or any, at all) information about how to configure an ISA Server 2000 for this purpose. Lots of stuff on 2004, of course; also, I think I saw something for 2006. But nothing I could find about 2000. Reading about 2004, it seems that the only way I can do site-on-site with a Cisco router (read: a non-ISA-Server machine) is through something they call a "IPSec tunnel". Fair enough. However, I can't figure for the life of me how could I even start to find, leave alone configure, such a thing. Do you, people, happen to know how to do IPSec tunelling on a ISA Server 2000, so I can connect to a Cisco WRV210 VPN-enabled router, and build a site-to-site VPN for both networks? Or is this not possible at all? (Meaning I should change anything in this configuration to make it work...)

  Read the article

• Shut Out of XP - No Admin Password or CDR

  - by ashes999

  I inherited an old WinXP/Linux dual-boot machine from the stoneage. Because it has Linux, the regular boot process is replaced with the Fedora boot loader; I cannot, therefore, press F8 strategically to tell my PC to boot from CD. Even if I could, it's a moot point; the CDR doesn't seem to recognize any CDs. To make things worse, there's no option to network boot. The original user is probably long gone; I don't know the password for any of the Administrator group users. I can login using my corp account, but that's unprivileged on this machine. Since I'm not an admin, I can't do crazy things, like looking at boot.ini. Or deleting files. I only have 500MB free on my C drive. I'm pretty sure I can't boot from a USB, since I didn't see any settings for this in my BIOS. How can I get admin access for my user? Edit: Things I've tried: Boot from CD (CD not recognized) Launch CD from XP (CD not recognized) Install Daemon Tools Lite so I can install from an ISO -- don't have admin privileges XP password recovery tool -- requires admin privileges Adding an admin user -- no access to Control Panel Users since I'm not an admin Logging in as both the admin users on the system (trying some standard passwords) Using Fedora to chntpw (the Fedora version installed is ancient -- 2.7)

  Read the article

• What kinds of protections against viruses does Linux provide out of the box for the average user?

  - by ChocoDeveloper

  I know others have asked this, but I have other questions related to this. In particular, I'm concerned about the damage that the virus can do the user itself (his files), not the OS in general nor other users of the same machine. This question came to my mind because of that ransomware virus that is encrypting machines all over the world, and then asking the user to send a payment in Bitcoin if he wants to recover his files. I have already received and opened the email that is supposed to contain the virus, so I guess I didn't do that bad because nothing happened. But would I have survived if I opened the attachment and it was aimed at Linux users? I guess not. One of the advantages is that files are not executable by default right after downloading them. Is that just a bad default in Windows and could be fixed with a proper configuration? As a Linux user, I thought my machine was pretty secure by default, and I was even told that I shouldn't bother installing an antivirus. But I have read some people saying that the most important (or only?) difference is that Linux is just less popular, so almost no one writes viruses for it. Is that right? What else can I do to be safe from this kind of ransomware virus? Not automatically executing random files from unknown sources seems to be more than enough, but is it? I can't think of many other things a user can do to protect his own files (not the OS, not other users), because he has full permissions on them.

  Read the article

• Bad Intel DQ965GF motherboard? Fails memtest, but memory is good.

  - by Boden

  I've got a machine with a DQ965GF motherboard. Two days ago it started locking up hard. Ran memtest 3.3, 1.7, and TestMem 4. TestMem just freezes, memtest failed on moving 8 bit inversions. Letting memtest run eventually causes the system to restart. I pulled memory sticks one by one, and then replaced the memory with a couple of known good sticks. No luck. I switched power supplies, didn't help. Swapped video cards just to be safe. No help. When I start the machine I get a single beep before it POSTs. According to the manual, a single beep means: 1 beep - Refresh Error (with nothing on the screen and it is not a video problem) I'm assuming that the motherboard has failed since it's obviously not a RAM or power issue. Do you agree? NOTE: I also tried resetting BIOS defaults, and even flashed the BIOS to the latest version. I also ran the Mersenne Prime Test and the CPU seems to click along just fine. (Tried logging in to superuser with openid but it's not working for me today. Hope this gets through)

  Read the article

• Is TortoiseSVN really this buggy?

  - by John Isaacks

  I have been using tortoise svn for a couple weeks now. I get errors very often. Almost everything I do creates an error. this is with repositories on the internet, locally on my machine or a machine on the network. So I started to keep track. Some examples are below. 12/31/2010 Can't move 'C:\Users\jisaacks\Desktop\my branch test.svn\tmp\entries' to 'C:\Users\jisaacks\Desktop\my branch test.svn\entries': The file or directory is corrupted and unreadable. 01/04/2011 Commit failed (details follow): Server sent unexpected return value (405 Method Not Allowed) in response to MKCOL request for '/svn/kranichs-svn/!svn/wrk/b316f15e-0869-4644-9c53-87aa0103506b/branches' 01/06/2011 Can't move 'C:\Users\jisaacks\Desktop\DVD Catalog\vendors.svn\tmp\entries' to 'C:\Users\jisaacks\Desktop\DVD Catalog\vendors.svn\entries': The file or directory is corrupted and unreadable. 01/06/2011 Can't move 'C:\Users\jisaacks\Desktop\DVD Catalog\cake\tests\test_app\views\layouts.svn\tmp\entries' to 'C:\Users\jisaacks\Desktop\DVD Catalog\cake\tests\test_app\views\layouts.svn\entries': The file or directory is corrupted and unreadable. 01/06/2011 Commit failed (details follow): attempt to write a readonly database attempt to write a readonly database That last one about the read only database happens every time I commit. Say if I am working on the head revision (7) in a working copy. I make a change and commit it. It gives me this error. But if I look at the log it tells me that there is now a revision 8 (the commit I just made) but I am still on revision 7. So I need to run update to be on the current revision that I just commited. I hope I explained that clearly. Anyways with all these errors I wonder.. Is TSVN just this unstable, does everyone have these issues. Or is it just me? If just me, what could I be doing wrong?

  Read the article

• WS2008 subst in Logon script does not "stick"

  - by Frans

  I have a terminal server environment exclusively with Windows Server 2008. My problem is that I need to "map" a drive letter to each users Temp folder. This is due to a legacy app that requries a separate Temp folder for each user but which does not understand %temp%. So, just add "subst t: %temp%" to the logon script, right? The problem is that, even though the command runs, the subst doesn't "stick" and the user doesn't get a T: drive. Here is what I have tried; The simplest version: 'Mapping a temp drive Set WinShell = WScript.CreateObject("WScript.Shell") WinShell.Run "subst T: %temp%", 2, True That didn't work, so tried this for more debug information: 'Mapping a temp drive Set WinShell = WScript.CreateObject("WScript.Shell") Set procEnv = WinShell.Environment("Process") wscript.echo(procEnv("TEMP")) tempDir = procEnv("TEMP") WinShell.Run "subst T: " & tempDir, 3, True This shows me the correct temp path when the user logs in - but still no T: Drive. Decided to resort to brute force and put this in my login script: 'Mapping a temp drive Set WinShell = WScript.CreateObject("WScript.Shell") WinShell.Run "\\domain\sysvol\esl.hosted\scripts\tempdir.cmd", 3, True where \domain\sysvol\esl.hosted\scripts\tempdir.cmd has this content: echo on subst t: %temp% pause When I log in with the above then the command window opens up and I can see the subst command being executed correctly, with the correct path. But still no T: drive. I have tried running all of the above scripts outside of a login script and they always work perfectly - this problem only occurs when doing it from inside a login script. I found a passing reference on an MSFN forum about a similar problem when the user is already logged on to another machine - but I have this problem even without being logged on to another machine. Any suggestion on how to overcome this will be much appreciated.

  Read the article

• free up not used space on a qcow2-image-file on kvm/qemu

  - by bmaeser

  we are using kvm/qemu with qcow2-images for our virtual machines. qcow2 has this nice feature where the image file only allocates the actually needed space by the virtual-machine. but how do i shrink back the image file, if the virtual machine's allocated space gets smaller? example: 1.) i create a new image with qcow2 format, size 100GB 2.) i use this image to install ubuntu. installation needs about 10 gb, the image-file grows up to about 10GB. nothing unexpected so far. 3.) i fill up the image with about 40 GB of additional data. the image-file grows up to 50GB. i am ok with that :-) 4.) this is where it gets strange: i delete all of the 40GB data on the image, but the image-size still eats up 50GB. question: how do i free up that 40GB of data and shrink the image to the only needed 10 GB? thanks in advance, berni

  Read the article

• Setting up MySQL Linux slave with a Windows master

  - by philwilks

  I'm running a MySQL 5.0 database server on Windows Server 2008. The total size of the database is about 1Gb. I make daily backups, but I'd like to step up to having a slave server for extra protection. My thinking was that I wouldn't need the expense of a Windows machine to do this, and a Linux "cloud server" from RackSpace would do the job well for quite a low cost. However I have little experience with Linux, so I have a few questions... Does this sound like a good idea? Is there anything wrong with linking Windows and Linux MySQL servers? Does Linux have the equivalent of Remote Desktop Connection? If so can I use this from a Windows machine? Would a particular Linux distro be well suited to this task? RackSpace offer ArchLinux, CentOS, Debian, Fedora and Ubuntu. My immediate thinking is to go with Ubuntu as I've heard it's more friendly for people coming from a Windows background. Any comments you have would be very appreciated! Phil

  Read the article

• BizTalk/MQ - DCOM was unable to communicate with the computer xxx using any of the configured protocols

  - by NealWalters

  I've read the other questions on this same error, but don't see a close match to this scenario. We got 18 of these last night between 12:17:13 and 12:39:37 on Win 2008/R2. It caused us to lose connectivity between BizTalk 2010 and WebSphere MQ machine. All our BizTalk machines (Prod, QA, Train, etc...) got the messages at the roughly same time and in the same quantity (about 18 of them). Computer xxx is the WebSphere MQ machine. What could cause this in the middle of the night? The servers are configured and running in Prod for a couple of years. There is no Win Firewall running, and servers are practically on the same rack. Could a run-away or 100% utilized CPU on the WebSphere MQ cause this issue? What else could cause it? BizTalk did NOT auto-recover from this situation. The above was followed by thousands of this message in the BizTalk event logs: The adapter "MQSeries" raised an error message. Details "Error encountered on Queue.Get Queue name = MyQManager/MyQueueName Reason code = 2354.". We restated BizTalk host instances, and it did not come back right away. It seemed we had to stop host instances for about two minutes, then start them.

  Read the article

• Install VirtualBox on Ubuntu 12.04.1 (on [Samsung] Chromebook)

  - by iphonedev7

  I have dual booted Ubuntu Linux 12.04.1 LTS on my Samsung Series 5 ChromeBook, and am trying to run/install Oracle VirtualBox (from the generic .run file downloaded from their website). However, every time I try to run it (as root from the command line), it gives me the following error occurs: Please install the build and header files for your current Linux kernel. The current kernel version is 3.4.0 Problems were found which would prevent VirtualBox from installing. I have tried the version from the Software Center, as well as the command line installation, both of which gave me errors based on my linux-headers/linux-kernel/linux-[kernel]-image. Here's an error I keep getting (on the command line): First Installation: checking all kernels... It is likely that 3.4.0 belongs to a chroot's host Building only for 3.5.0-18-generic Building initial module for 3.5.0-18-generic ERROR (dkms apport): kernel package linux-headers-3.5.0-18-generic is not supported Error! Bad return status for module build on kernel: 3.5.0-18-generic (x86_64) Consult /var/lib/dkms/virtualbox/4.1.12/build/make.log for more information. Setting up virtualbox-qt (4.1.12-dfsg-2ubuntu0.2) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place ...And one of the more cryptic errors I get when trying to start any Virtual Machine: Result Code: NS_ERROR_FAILURE (0x80004005) Component: Machine Interface: IMachine {5eaa9319-62fc-4b0a-843c-0cb1940f8a91}

  Read the article

• SQL SERVER 2005 with Windows 7 Problems

  - by azamsharp

  First of all I restored the database from other server and now all the stored procedures are named as [azamsharp].[usp_getlatestposts]. I think [azamsharp] is prefixed since it was the user on the original server. Now, on my local machine this does not run. I don't want the [azamsharp] prefix with all the stored procedures. Also, when I right click on the Sproc I cannot even see the properties option. I am running the SQL SERVER 2005 on Windows 7. UPDATE: The weird thing is that if I access the production database from my machine I can see the properties option. So, there is really something wrong with Windows 7 security. UPDATE 2: When I ran the orphan users stored procedure it showed two users "azamsharp" and "dbo1". I fixed the "azamsharp" user but "dbo1" is not getting fixed. When I run the following script: exec sp_change_users_login 'update_one', 'dbo1', 'dbo1' I get the following error: Msg 15291, Level 16, State 1, Procedure sp_change_users_login, Line 131 Terminating this procedure. The Login name 'dbo1' is absent or invalid.

  Read the article

• Internet Sharing on Lion breaks my routing table

  - by seaders

  When in the office, I'm connected to a 192.168.1.0/24 network. When Internet Sharing is off, when I run netstat -nr the first entry shows default 192.168.1.254 UGSc 10 62 en0 If I turn Internet sharing on, it shows default link#5 UCS 2 0 en1 This is obviously incorrect and breaks all connectivity of my machine. en1 is my wireless, whereas en0 is my ethernet. If I then disable Internet Sharing, it even deletes that incorrect route, so I'm left with no default route at all. Currently I have one script that I run when I share, or after, when I disable that does route delete default route add default 192.168.1.254 That fixes everything, but I'd love to know what's actually making this happen and how to properly fix it. And just to say that at some point a few months ago, this was working absolutely perfectly, with no hitches, then one day when I brought the laptop home, I couldn't disable the internet sharing, so I couldn't connect to my home wifi. I eventually had to restart the machine and since then this problem has been happening. Any help would be greatly appreciated, thank you.

  Read the article

• Host name change breaking http? Fedora

  - by Dave

  OK so I have been messing around on my development server. It has been a while since I have had my head in linux and I suspect I have broken something. I have SSH running and that is working fine. I also have HTTP and I had FTP running also. Earlier today I decided I wanted to rename the machine so I updated the /etc/hosts file and /etc/sysconfig/network. I also changed the server name in the httpd.conf. I rebooted the machine and reconnected to SSH fine. Later I was messing around with the FTP service (trying to tighten up the user security) and when i tried to connect remotely to FTP no joy, it said cannot connect. I thought that was weird but had planned to remove ftp as we will be using github so removed ftp and moved on. Then I tried to connect to the website but major fail. even connecting to the IP address is failing. I used lynx to connect to the localhost and there was my site so something going on at server level. I thought maybe something up with iptables but I have not changed them but tried adding http but still no joy. I have a - Fedora release 17 (Beefy Miracle) NAME=Fedora VERSION="17 (Beefy Miracle)" ID=fedora VERSION_ID=17 PRETTY_NAME="Fedora 17 (Beefy Miracle)" ANSI_COLOR="0;34" CPE_NAME="cpe:/o:fedoraproject:fedora:17" Fedora release 17 (Beefy Miracle) Fedora release 17 (Beefy Miracle) Linux version 3.3.4-5.fc17.x86_64 ([email protected]) (gcc version 4.7.0 20120504 (Red Hat 4.7.0-4) (GCC) ) #1 SMP Mon May 7 17:29:34 UTC 2012 This is my iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED ACCEPT icmp -- anywhere anywhere ACCEPT all -- anywhere anywhere ACCEPT tcp -- anywhere anywhere state NEW tcp dpt:ssh REJECT all -- anywhere anywhere reject-with icmp-host-prohibited Chain FORWARD (policy ACCEPT) target prot opt source destination REJECT all -- anywhere anywhere reject-with icmp-host-prohibited Chain OUTPUT (policy ACCEPT) target prot opt source destination Like I say I can use SSH no issue but http although running is a no go from a remote computer. Any ideas?

  Read the article

• How can I print from my lion mac mini to my windows XP, with simple file sharing?

  - by Jules

  I have quite a complicated setup, perhaps. And a lot of history on this issue, I'm hoping that I don't have to buy a new printer. I've got a HP Wireless USB Print Server, which requires client software, I can't just use it as an IP Printer. The HP software is pretty poor on the mac and is no longer supported and often locks up the printer server and takes some considerable effort to actually print something. Let alone if a windows machine attaches to it first. My printer is an Epson Stylus R285. However, the windows client software is fine and we can print from windows 7 / XP without problem. We have simple file sharing setup as this is the only way I could get windows XP to talk to windows 7. However, I can't seem to get my mac mini to connect as anything other than a guest to my xp machine, to connect to the shared printer. I'm not considering some kind of internet printing as this would seems the simplest solution. But I'm not sure what will work with my setup ?

  Read the article

< Previous Page | 394 395 396 397 398 399 400 401 402 403 404 405  | Next Page >