Search Results

Search found 24301 results on 973 pages for 'execution process mfg'.

Page 399/973 | < Previous Page | 395 396 397 398 399 400 401 402 403 404 405 406  | Next Page >

• Analysing and measuring the performance of a .NET application (survey results)

  - by Laila

  Back in December last year, I asked myself: could it be that .NET developers think that you need three days and a PhD to do performance profiling on their code? What if developers are shunning profilers because they perceive them as too complex to use? If so, then what method do they use to measure and analyse the performance of their .NET applications? Do they even care about performance? So, a few weeks ago, I decided to get a 1-minute survey up and running in the hopes that some good, hard data would clear the matter up once and for all. I posted the survey on Simple Talk and got help from a few people to promote it. The survey consisted of 3 simple questions: Amazingly, 533 developers took the time to respond - which means I had enough data to get representative results! So before I go any further, I would like to thank all of you who contributed, because I now have some pretty good answers to the troubling questions I was asking myself. To thank you properly, I thought I would share some of the results with you. First of all, application performance is indeed important to most of you. In fact, performance is an intrinsic part of the development cycle for a good 40% of you, which is much higher than I had anticipated, I have to admit. (I know, "Have a little faith Laila!") When asked what tool you use to measure and analyse application performance, I found that nearly half of the respondents use logging statements, a third use performance counters, and 70% of respondents use a profiler of some sort (a 3rd party performance profilers, the CLR profiler or the Visual Studio profiler). The importance attributed to logging statements did surprise me a little. I am still not sure why somebody would go to the trouble of manually instrumenting code in order to measure its performance, instead of just using a profiler. I personally find the process of annotating code, calculating times from log files, and relating it all back to your source terrifyingly laborious. Not to mention that you then need to remember to turn it all off later! Even when you have logging in place throughout all your code anyway, you still have a fair amount of potentially error-prone calculation to sift through the results; in addition, you'll only get method-level rather than line-level timings, and you won't get timings from any framework or library methods you don't have source for. To top it all, we all know that bottlenecks are rarely where you would expect them to be, so you could be wasting time looking for a performance problem in the wrong place. On the other hand, profilers do all the work for you: they automatically collect the CPU and wall-clock timings, and present the results from method timing all the way down to individual lines of code. Maybe I'm missing a trick. I would love to know about the types of scenarios where you actively prefer to use logging statements. Finally, while a third of the respondents didn't have a strong opinion about code performance profilers, those who had an opinion thought that they were mainly complex to use and time consuming. Three respondents in particular summarised this perfectly: "sometimes, they are rather complex to use, adding an additional time-sink to the process of trying to resolve the existing problem". "they are simple to use, but the results are hard to understand" "Complex to find the more advanced things, easy to find some low hanging fruit". These results confirmed my suspicions: Profilers are seen to be designed for more advanced users who can use them effectively and make sense of the results. I found yet more interesting information when I started comparing samples of "developers for whom performance is an important part of the dev cycle", with those "to whom performance is only looked at in times of crisis", and "developers to whom performance is not important, as long as the app works". See the three graphs below. Sample of developers to whom performance is an important part of the dev cycle: Sample of developers to whom performance is important only in times of crisis: Sample of developers to whom performance is not important, as long as the app works: As you can see, there is a strong correlation between the usage of a profiler and the importance attributed to performance: indeed, the more important performance is to a development team, the more likely they are to use a profiler. In addition, developers to whom performance is an important part of the dev cycle have a higher tendency to use a much wider range of methods for performance measurement and analysis. And, unsurprisingly, the less important performance is, the less varied the methods of measurement are. So all in all, to come back to my random questions: .NET developers do care about performance. Those who care the most use a wider range of performance measurement methods than those who care less. But overall, logging statements, performance counters and third party performance profilers are the performance measurement methods of choice for most developers. Finally, although most of you find code profilers complex to use, those of you who care the most about performance tend to use profilers more than those of you to whom performance is not so important.

  Read the article

• Best way to throw exception and avoid code duplication

  - by JF Dion

  I am currently writing code and want to make sure all the params that get passed to a function/method are valid. Since I am writing in PHP I don't have access to all the facilities of other languages like C, C++ or Java to check for parameters values and types public function inscriptionExists($sectionId, $userId) // PHP vs. public boolean inscriptionExists(int sectionId, int userId) // Java So I have to rely on exceptions if I want to make sure that my params are both integers. Since I have a lot of places where I need to check for param validity, what would be the best way to create a validation/exception machine and avoid code duplication? I was thinking on a static factory (since I don't want to pass it to all of my classes) with a signature like: public static function factory ($value, $valueType, $exceptionType = 'InvalidArgumentException'); Which would then call the right sub process to validate based on the type. Am I on the right way, or am I going completely off the road and overthinking my problem?

  Read the article

• HTG Explains: What Does “Bricking” a Device Mean?

  - by Chris Hoffman

  When someone breaks a device and turns it into an expensive brick, people say they “bricked” it. We’ll cover exactly what causes bricking and why, how you can avoid it, and what to do if you have a bricked device. Bear in mind that many people use the term “bricking” incorrectly and refer to a device that isn’t working properly as “bricked.” if you can easily recover the device through a software process, it’s technically not “bricked.” Image Credit: Esparta Palma on Flickr HTG Explains: What is the Windows Page File and Should You Disable It? How To Get a Better Wireless Signal and Reduce Wireless Network Interference How To Troubleshoot Internet Connection Problems

  Read the article

• The Beginner’s Guide to Customizing Your Android Home Screen

  - by Chris Hoffman

  If you’re just getting started with Android, its customizability can seem a bit daunting. We’ll walk you through customizing your Android home-screen, taking advantage of widgets, and getting third-party launchers with more features. The screenshots for this article were taken on Android 4.2. If you’re using an older device, the exact process will look a little different, but you should be able to follow along anyway. Why Does 64-Bit Windows Need a Separate “Program Files (x86)” Folder? Why Your Android Phone Isn’t Getting Operating System Updates and What You Can Do About It How To Delete, Move, or Rename Locked Files in Windows

  Read the article

• Detecting 404 errors after a new site design

  - by James Crowley

  We recently re-designed Developer Fusion and as part of that we needed to ensure that any external links were not broken in the process. In order to monitor this, we used the awesome LogParser tool. All you need to do is open up a command prompt, navigate to the directory with your web site's log files in, and run a query like this: "c:\program files (x86)\log parser 2.2\logparser" "SELECT top 500 cs-uri-stem,count(*) FROM u_ex*.log WHERE sc-status=404 GROUP BY cs-uri-stem order by count(*) desc" -rtp:-1 topMissingUrls.txt And you've got a text file with the top 500 requested URLs that are returning 404. Simple!

  Read the article

• Cloud Computing Architecture Patterns: Don’t Focus on the Client

  - by BuckWoody

  Normally I try to put topics in the positive in other words "Do this" not "Don't do that". Sometimes its clearer to focus on what *not* to do. Popular development processes often start with screen mockups, or user input descriptions. In a scale-out pattern like Cloud Computing on Windows Azure, that's the wrong place to start. Start with the Data    Instead, I recommend that you start with the data that a process requires. That data might be temporary or persisted, but starting with the data and its requirements helps to define not only the storage engine you need but also drives everything from security to the integrity of the application. For instance, assume the requirements show that the user must enter their phone number, and that this datum is used in a contact management system further down the application chain. For that datum, you can determine what data type you need (U.S. only or International?) the security requirements, whether it needs ACID compliance, how it will be searched, indexed and so on. From one small data point you can extrapolate out your options for storing and processing the data. Here's the interesting part, which begins to break the patterns that we've used for decades: all of the data doesn't have the same requirements. The phone number might be best suited for a list, or an element, or a string, with either BASE or ACID requirements, based on how it is used. That means we don't have to dump everything into XML, an RDBMS, a NoSQL engine, or a flat file exclusively. In fact, one record might use all of those depending on the use-case requirements. Next Is Data Management  With the data defined, we can move on to how to store the data. Again, the requirements now dictate whether we need a full relational calculus or set-based operations, or we can choose another method based on the requirements for the data. And breaking another pattern its OK to store in more than once, in more than one location. We do this all the time for reporting systems and Business Intelligence systems, so this is a pattern we need to think about even for OLTP data. Move to Data Transport How does the data get around? We can use a connection-based method, sending the data along a transport to the storage engine, but in some cases we may want to use a cache, a queue, the Service Bus, or Complex Event Processing. Finally, Data Processing Most RDBMS engines, NoSQL, and certainly Big Data engines not only store data, but can process and manipulate it as well. Its doubtful that you'll calculate that phone number right? Well, if you're the phone company, you most certainly will. And so we see that even once we've chosen the data type, storage and engine, the same element can have different computing requirements based on how it is used. Sure, We Need A Front-End At Some Point Not all data is entered by human hands in fact most data isn't. We don't really need a Graphical User Interface (GUI) we need some way for a GUI to get data into and out of the systems listed earlier.   But when we do need to allow users to enter or examine data, that should be left to the GUI that best fits the device the user has. Ever tried to use an application designed for a web browser on a phone? Or one designed for a tablet on a phone? Its usually quite painful. The siren song of "We'll just write one interface for all devices" is strong, and has beguiled many an unsuspecting architect. But they just don't work out.   Instead, focus on the data, its transport and processing. Create API calls or a message system that allows for resilient transport to the device or interface, and let it do what it does best. References Microsoft Architecture Journal:   http://msdn.microsoft.com/en-us/architecture/bb410935.aspx Patterns and Practices:   http://msdn.microsoft.com/en-us/library/ff921345.aspx Windows Azure iOS, Android, Windows 8 Mobile Devices SDK: http://www.windowsazure.com/en-us/develop/mobile/tutorials/get-started-ios/ Windows Azure Facebook SDK: http://ntotten.com/2013/03/14/using-windows-azure-mobile-services-with-the-facebook-sdk-for-windows-phone/

  Read the article

• DIY Glowing Easter Eggs Ripe for After Hours Easter Egg Hunt

  - by Jason Fitzpatrick

  This DIY project mixes up LEDS, plastic Easter Eggs, and candy, for delicious and glow-in-the-dark fun. How do you get from a plain plastic egg to a glowing one? All you need to do is craft some simple LED “throwies” and tuck them inside the eggs. Check out the video above to see the entire process from start to finish. [via Make] How to Own Your Own Website (Even If You Can’t Build One) Pt 3 How to Sync Your Media Across Your Entire House with XBMC How to Own Your Own Website (Even If You Can’t Build One) Pt 2

  Read the article

• Convert an Enum to String

  - by Aamir Hasan

   Retrieves the name of the constant in the specified enumeration that has the specified value. If you have used an enum before you will know that it can represent numbers (usually int but also byte, sbyte, short, ushort, int, uint, long, and ulong) but not strings. I created my enum and I was in the process of coding up a lookup table to convert my enum parameter back into a string when I found this handy method called Enum.GetName(). using System;public class GetNameTest { enum Colors { Red, Green, Blue, Yellow }; enum Styles { Plaid, Striped, Tartan, Corduroy }; public static void Main() {Response.Write("The 4th value of the Colors Enum is" + Enum.GetName(typeof(Colors), 3));Response.Write("The 4th value of the Styles Enum is "+ Enum.GetName(typeof(Styles), 3)); }}Reference:http://msdn.microsoft.com/en-us/library/system.enum.getname.aspxhttp://www.studentacad.com/post/2010/03/31/Convert-an-Enum-to-String.aspx

  Read the article

• Recover that Photo, Picture or File You Deleted Accidentally

  - by The Geek

  Have you ever accidentally deleted a photo on your camera, computer, USB drive, or anywhere else? What you might not know is that you can usually restore those pictures—even from your camera’s memory stick. Windows tries to prevent you from making a big mistake by providing the Recycle Bin, where deleted files hang around for a while—but unfortunately it doesn’t work for external USB drives, USB flash drives, memory sticks, or mapped drives. The great news is that this technique also works if you accidentally deleted the photo… from the camera itself. That’s what happened to me, and prompted writing this article. Restore that File or Photo using Recuva The first piece of software that you’ll want to try is called Recuva, and it’s extremely easy to use—just make sure when you are installing it, that you don’t accidentally install that stupid Yahoo! toolbar that nobody wants. Now that you’ve installed the software, and avoided an awful toolbar installation, launch the Recuva wizard and let’s start through the process of recovering those pictures you shouldn’t have deleted. The first step on the wizard page will let you tell Recuva to only search for a specific type of file, which can save a lot of time while searching, and make it easier to find what you are looking for. Next you’ll need to specify where the file was, which will obviously be up to wherever you deleted it from. Since I deleted mine from my camera’s SD card, that’s where I’m looking for it. The next page will ask you whether you want to do a Deep Scan. My recommendation is to not select this for the first scan, because usually the quick scan can find it. You can always go back and run a deep scan a second time. And now, you’ll see all of the pictures deleted from your drive, memory stick, SD card, or wherever you searched. Looks like what happened in Vegas didn’t stay in Vegas after all… If there are a really large number of results, and you know exactly when the file was created or modified, you can switch to the advanced view, where you can sort by the last modified time. This can help speed up the process quite a bit, so you don’t have to look through quite as many files. At this point, you can right-click on any filename, and choose to Recover it, and then save the files elsewhere on your drive. Awesome! Restore that File or Photo using DiskDigger If you don’t have any luck with Recuva, you can always try out DiskDigger, another excellent piece of software. I’ve tested both of these applications very thoroughly, and found that neither of them will always find the same files, so it’s best to have both of them in your toolkit. Note that DiskDigger doesn’t require installation, making it a really great tool to throw on your PC repair Flash drive. Start off by choosing the drive you want to recover from…   Now you can choose whether to do a deep scan, or a really deep scan. Just like with Recuva, you’ll probably want to select the first one first. I’ve also had much better luck with the regular scan, rather than the “dig deeper” one. If you do choose the “dig deeper” one, you’ll be able to select exactly which types of files you are looking for, though again, you should use the regular scan first. Once you’ve come up with the results, you can click on the items on the left-hand side, and see a preview on the right.  You can select one or more files, and choose to restore them. It’s pretty simple! Download DiskDigger from dmitrybrant.com Download Recuva from piriform.com Good luck recovering your deleted files! And keep in mind, DiskDigger is a totally free donationware software from a single, helpful guy… so if his software helps you recover a photo you never thought you’d see again, you might want to think about throwing him a dollar or two. Similar Articles Productive Geek Tips Stupid Geek Tricks: Undo an Accidental Move or Delete With a Keyboard ShortcutRestore Accidentally Deleted Files with RecuvaCustomize Your Welcome Picture Choices in Windows VistaAutomatically Resize Picture Attachments in Outlook 2007Resize Your Photos with Easy Thumbnails TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Icelandic Volcano Webcams Open Multiple Links At One Go NachoFoto Searches Images in Real-time Office 2010 Product Guides Google Maps Place marks – Pizza, Guns or Strip Clubs Monitor Applications With Kiwi

  Read the article

• Downloads killing internet on my home network

  - by Travis

  I am currently having a problem with my wireless. Whenever I try to download anything it kills the internet for every other application(tabs within the same browser, browsers on other computers on the same network) except the process doing the download. This occurs with everything from downloading updates to iso's. I am not using a torrent. It happens when downloading upgrades, browser downloads, or anything else. This problem does not occur when I use Windows 7 on the same computer and it stops killing the internet for other computers if I turn the download/Ubuntu off. I am using an ASUS G74SX laptop running Ubuntu 12.10 with Gnome 3.6. My wireless card is an Intel Corporation Centrino Wireless-N + WiMAX 6150 (rev 67) Thanks!

  Read the article

• Google I/O 2012 - Native Client LIVE

  Google I/O 2012 - Native Client LIVE Colton McAnlis, Noel Allen In this talk, we will be porting an application to Native Client in 60 minutes, LIVE; showing the power of what Native Client can provide for traditional C++ developers looking to move to the web. In the porting process we'll cover specific tasks that a developer would need to perform during a port, and how to to address them with new tools and technologies including debugging integration with Visual Studio and a set of newly added utility libraries to the SDK. Attendees to this session will walk away with a clear understanding of what's required to port their applications to Native Client so that they can start their own projects For all I/O 2012 sessions, go to developers.google.com From: GoogleDevelopers Views: 16 0 ratings Time: 48:21 More in Science & Technology

  Read the article

• StreamInsight/SSIS Integration White Paper

  - by Roman Schindlauer

  This has been tweeted all over the place, but we still want to give it proper attention here in our blog: SSIS (SQL Server Integration Service) is widely used by today’s customers to transform data from different sources and load into a SQL Server data warehouse or other targets. StreamInsight can process large amount of real-time as well as historical data, making it easy to do temporal and incremental processing.  We have put together a white paper to discuss how to bring StreamInsight and SSIS together and leverage both platforms to get crucial insights faster and easier. From the paper’s abstract: The purpose of this paper is to provide guidance for enriching data integration scenarios by integrating StreamInsight with SQL Server Integration Services. Specifically, we looked at the technical challenges and solutions for such integration, by using a case study based on a customer scenarios in the telecommunications sector. Please take a look at this paper and send us your feedback! Using SQL Server Integration Services and StreamInsight Together Regards, Ping Wang

  Read the article

• Welch's Juices-up Its Inventory Management with Oracle Supply Chain

  - by [email protected]

  Supply & Demand Chain Executive published recently a great success story about Welch's implementation of "Take Supply Chain and G.SI to work with Oracle Process Manufacturing". The company says it's been able to improve operational control, inventory accuracy, visibility and order fulfillment by automating its processes across three production/warehousing locations nationwide. Improving warehouse and inventory management operations creates efficiencies across a high-velocity nationwide supply chain Welch's production facilities were collecting more information than ever before on the flow of materials and inventory, but the company needed an effective and accurate method to organize and manage these data.   Article found at: http://www.sdcexec.com/publication/article.jsp?pubId=1&id=12256&pageNum=2     

  Read the article

• Welch's Juices-up Its Inventory Management with Oracle Supply Chain

  - by [email protected]

  Supply & Demand Chain Executive published recently a great success story about Welch's implementation of "Take Supply Chain and G.SI to work with Oracle Process Manufacturing". The company says it's been able to improve operational control, inventory accuracy, visibility and order fulfillment by automating its processes across three production/warehousing locations nationwide. Improving warehouse and inventory management operations creates efficiencies across a high-velocity nationwide supply chain Welch's production facilities were collecting more information than ever before on the flow of materials and inventory, but the company needed an effective and accurate method to organize and manage these data.   Article found at: http://www.sdcexec.com/publication/article.jsp?pubId=1&id=12256&pageNum=2     

  Read the article

• Welch's Juices-up Its Inventory Management with Oracle Supply Chain

  - by [email protected]

  Supply & Demand Chain Executive published recently a great success story about Welch's implementation of "Take Supply Chain and G.SI to work with Oracle Process Manufacturing". The company says it's been able to improve operational control, inventory accuracy, visibility and order fulfillment by automating its processes across three production/warehousing locations nationwide. Improving warehouse and inventory management operations creates efficiencies across a high-velocity nationwide supply chain Welch's production facilities were collecting more information than ever before on the flow of materials and inventory, but the company needed an effective and accurate method to organize and manage these data.   Article found at: http://www.sdcexec.com/publication/article.jsp?pubId=1&id=12256&pageNum=2     

  Read the article

• Ranking - an Introduction

  - by PointsToShare

  © 2011 By: Dov Trietsch. All rights reserved Ranking Ranking is quite common in the internet. Readers are asked to rank their latest reading by clicking on one of 5 (sometimes 10) stars. The number of stars is then converted to a number and the average number of stars as selected by all the readers is proudly (or shamefully) displayed for future readers. SharePoint 2007 lacked this feature altogether. SharePoint 2010 allows the users to rank items in a list or documents in a library (the two are actually the same because a library is actually a list). But in SP2010 the computation of the average is done later on a timer rather than on-the-spot as it should be. I suspect that the reason for this shortcoming is that they did not involve a mathematician! Let me explain. Ranking is kept in a related list. When a user rates a document the rank-list is added an item with the item id, the user name, and his number of stars. The fact that a user already ranked an item prevents him from ranking it again. This prevents the creator of the item from asking his mother to rank it a 5 and do it 753 times, thus stacking the ballot. Some systems will allow a user to change his rating and this will be done by updating the rank-list item. Now, when the timer kicks off, the list is spanned and for each item the rank-list items containing this id are summed up and divided by the number of votes thus yielding the new average. This is obviously very time consuming and very server intensive. In the 18th century an early actuary named James Dodson used what the great Augustus De Morgan (of De Morgan’s law) later named Commutation tables. The labor involved in computing a life insurance premium was staggering and also very error prone. Clerks with pencil and paper would multiply and add mountains of numbers to do the task. The more steps the greater the probability of error and the more expensive the process. Commutation tables created a “summary” of many steps and reduced the work 100 fold. So had Microsoft taken a lesson in the history of computation, they would have developed a much faster way for rating that may be done in real-time and is also 100 times faster and less CPU intensive. How do we do this? We use a form of commutation. We always keep the number of votes and the total of stars. One simple division gives us the average. So we write an event receiver. When a vote is added, we just add the stars to the total-stars and 1 to the number of votes. We then recomputed the average. When a vote is updated, we reduce the total by the old vote, increase it by the new vote and leave the number of votes the same. Again we do the division to get the new average. When a vote is deleted (highly unlikely and maybe even prohibited), we reduce the total by that vote and reduce the number of votes by 1… Gone are the days of spanning lists, counting items, and tallying votes and we have no need for a timer process to run it all. This is the first of a few treatises on ranking. Even though I discussed the math and the history thereof, in here I am only going to solve the presentation issue. I wanted to create the CSS and Jscript needed to display the stars, create the various effects like hovering and clicking (onmouseover, onmouseout, onclick, etc.) and I wanted to create a general solution with any number of stars. When I had it all done, I created the ranking game so that I could test it. The game is interesting in and on itself, so here it is (or go to the games page and select “rank the stars”). BTW, when you play it, look at the source code and see how it was all done.  Next, how the 5 stars are displayed in the New and Update forms. When the whole set of articles will be done, you’ll be able to create the complete solution. That’s all folks!

  Read the article

• Why is mysql unable to configure?

  - by Tijs

  I try to install mysql-server on my Ubuntu vps server, and it's able to install, but not to configure. If it tries to configure I get this: ...fail! invoke-rc.d: initscript mysql, action "start" failed. dpkg: error processing mysql-server-5.0 (--configure): subprocess post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of mysql-server: mysql-server depends on mysql-server-5.0; however: Package mysql-server-5.0 is not configured yet. dpkg: error processing mysql-server (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: mysql-server-5.0 mysql-server E: Sub-process /usr/bin/dpkg returned an error code (1) Does someone know a solution to this? Btw, my other question can be closed, it's solved, but I cant comment on it anymore.

  Read the article

• Quickly and Automatically Restart a Windows Program When it Crashes

  - by Lori Kaufman

  We’ve all had programs crash on us in Windows at one time or another. You can take the time to manually start the program again, or you can have a simple program like ReStartMe restart it automatically for you. ReStartMe is a free program that has one purpose in life, to restart processes. You tell it to watch specific processes and if any of those processes exit, whether they crashed or you accidentally closed them, ReStartMe will automatically restart them. To install the program, double-click on the restartmeinstaller.exe file you downloaded (see the link at the end of the article). Follow the easy installation process, accepting the default settings. How to Factory Reset Your Android Phone or Tablet When It Won’t Boot Our Geek Trivia App for Windows 8 is Now Available Everywhere How To Boot Your Android Phone or Tablet Into Safe Mode

  Read the article

• How to Share Files Between User Accounts on Windows, Linux, or OS X

  - by Chris Hoffman

  Your operating system provides each user account with its own folders when you set up several different user accounts on the same computer. Shared folders allow you to share files between user accounts. This process works similarly on Windows, Linux, and Mac OS X. These are all powerful multi-user operating systems with similar folder and file permission systems. Windows On Windows, the “Public” user’s folders are accessible to all users. You’ll find this folder under C:\Users\Public by default. Files you place in any of these folders will be accessible to other users, so it’s a good way to share music, videos, and other types of files between users on the same computer. Windows even adds these folders to each user’s libraries by default. For example, a user’s Music library contains the user’s music folder under C:\Users\NAME\as well as the public music folder under C:\Users\Public\. This makes it easy for each user to find the shared, public files. It also makes it easy to make a file public — just drag and drop a file from the user-specific folder to the public folder in the library. Libraries are hidden by default on Windows 8.1, so you’ll have to unhide them to do this. These Public folders can also be used to share folders publically on the local network. You’ll find the Public folder sharing option under Advanced sharing settings in the Network and Sharing Control Panel. You could also choose to make any folder shared between users, but this will require messing with folder permissions in Windows. To do this, right-click a folder anywhere in the file system and select Properties. Use the options on the Security tab to change the folder’s permissions and make it accessible to different user accounts. You’ll need administrator access to do this. Linux This is a bit more complicated on Linux, as typical Linux distributions don’t come with a special user folder all users have read-write access to. The Public folder on Ubuntu is for sharing files between computers on a network. You can use Linux’s permissions system to give other user accounts read or read-write access to specific folders. The process below is for Ubuntu 14.04, but it should be identical on any other Linux distribution using GNOME with the Nautilus file manager. It should be similar for other desktop environments, too. Locate the folder you want to make accessible to other users, right-click it, and select Properties. On the Permissions tab, give “Others” the “Create and delete files” permission. Click the Change Permissions for Enclosed Files button and give “Others” the “Read and write” and “Create and Delete Files” permissions. Other users on the same computer will then have read and write access to your folder. They’ll find it under /home/YOURNAME/folder under Computer. To speed things up, they can create a link or bookmark to the folder so they always have easy access to it. Mac OS X Mac OS X creates a special Shared folder that all user accounts have access to. This folder is intended for sharing files between different user accounts. It’s located at /Users/Shared. To access it, open the Finder and click Go > Computer. Navigate to Macintosh HD > Users > Shared. Files you place in this folder can be accessed by any user account on your Mac. These tricks are useful if you’re sharing a computer with other people and you all have your own user accounts — maybe your kids have their own limited accounts. You can share a music library, downloads folder, picture archive, videos, documents, or anything else you like without keeping duplicate copies.

  Read the article

• Remote Debug Windows Azure Cloud Service

  - by Shaun

  Originally posted on: http://geekswithblogs.net/shaunxu/archive/2013/11/02/remote-debug-windows-azure-cloud-service.aspxOn the 22nd of October Microsoft Announced the new Windows Azure SDK 2.2. It introduced a lot of cool features but one of it shocked most, which is the remote debug support for Windows Azure Cloud Service (a.k.a. WACS).   Live Debug is Nightmare for Cloud Application When we are developing against public cloud, debug might be the most difficult task, especially after the application had been deployed. In order to minimize the debug effort, Microsoft provided local emulator for cloud service and storage once the Windows Azure platform was announced. By using local emulator developers could be able run their application on local machine with almost the same behavior as running on Windows Azure, and that could be debug easily and quickly. But when we deployed our application to Azure, we have to use log, diagnostic monitor to debug, which is very low efficient. Visual Studio 2012 introduced a new feature named "anonymous remote debug" which allows any workstation under any user could be able to attach the remote process. This is less secure comparing the authenticated remote debug but much easier and simpler to use. Now in Windows Azure SDK 2.2, we could be able to attach our application from our local machine to Windows Azure, and it's very easy.   How to Use Remote Debugger First, let's create a new Windows Azure Cloud Project in Visual Studio and selected ASP.NET Web Role. Then create an ASP.NET WebForm application. Then right click on the cloud project and select "publish". In the publish dialog we need to make sure the application will be built in debug mode, since .NET assembly cannot be debugged in release mode. I enabled Remote Desktop as I will log into the virtual machine later in this post. It's NOT necessary for remote debug. And selected "advanced settings" tab, make sure we checked "Enable Remote Debugger for all roles". In WACS, a cloud service could be able to have one or more roles and each role could be able to have one or more instances. The remote debugger will be enabled for all roles and all instances if we checked. Currently there's no way for us to specify which role(s) and which instance(s) to enable. Finally click "publish" button. In the windows azure activity window in Visual Studio we can find some information about remote debugger. To attache remote process would be easy. Open the "server explorer" window in Visual Studio and expand "cloud services" node, find the cloud service, role and instance we had just published and wanted to debug, right click on the instance and select "attach debugger". Then after a while (it's based on how fast our Internet connect to Windows Azure Data Center) the Visual Studio will be switched to debug mode. Let's add a breakpoint in the default web page's form load function and refresh the page in browser to see what's happen. We can see that the our application was stopped at the breakpoint. The call stack, watch features are all available to use. Now let's hit F5 to continue the step, then back to the browser we will find the page was rendered successfully.   What Under the Hood Remote debugger is a WACS plugin. When we checked the "enable remote debugger" in the publish dialog, Visual Studio will add two cloud configuration settings in the CSCFG file. Since they were appended when deployment, we cannot find in our project's CSCFG file. But if we opened the publish package we could find as below. At the same time, Visual Studio will generate a certificate and included into the package for remote debugger. If we went to the azure management portal we will find there will a certificate under our application which was created, uploaded by remote debugger plugin. Since I enabled Remote Desktop there will be two certificates in the screenshot below. The other one is for remote debugger. When our application was deployed, windows azure system will open related ports for remote debugger. As below you can see there are two new ports opened on my application. Finally, in our WACS virtual machine, windows azure system will copy the remote debug component based on which version of Visual Studio we are using and start. Our application then can be debugged remotely through the visual studio remote debugger. Below is the task manager on the virtual machine of my WACS application.   Summary In this post I demonstrated one of the feature introduced in Windows Azure SDK 2.2, which is Remote Debugger. It allows us to attach our application from local machine to windows azure virtual machine once it had been deployed. Remote debugger is powerful and easy to use, but it brings more security risk. And since it's only available for debug build this means the performance will be worse than release build. Hence we should only use this feature for staging test and bug fix (publish our beta version to azure staging slot), rather than for production.   Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

  Read the article

• How To Peel Garlic In Quick & Easy Way

  - by Gopinath

  Garlic is very common ingredient used in cooking in many parts of the world. In India it’s an undeniable ingredient in almost all the food items that are made using masala. So every cook of Indian kitchen knows the pain of peeling garlic. It’s a messy and time consuming process to peel of all the dead skin layers to get the tasty cloves. Cooking web site Saveur shows us as easy way to peel an entire garlic in less than 10 seconds using just two bowls.  No knifes, no scissor or any other instruments. Check the embedded video   I’ve not yet tried this trick at home, but looks like very easy one. What do you say? via Lifehacker (thanks vijay). cc image credit: flickr/lightlady

  Read the article

• Overview of SOA Diagnostics in 11.1.1.6

  - by ShawnBailey

  What tools are available for diagnosing SOA Suite issues? There are a variety of tools available to help you and Support diagnose SOA Suite issues in 11g but it can be confusing as to which tool is appropriate for a particular situation and what their relationships are. This blog post will introduce the various tools and attempt to clarify what each is for and how they are related. Let's first list the tools we'll be addressing: RDA: Remote Diagnostic Agent DFW: Diagnostic Framework Selective Tracing DMS: Dynamic Monitoring Service ODL: Oracle Diagnostic Logging ADR: Automatic Diagnostics Repository ADRCI: Automatic Diagnostics Repository Command Interpreter WLDF: WebLogic Diagnostic Framework This overview is not mean to be a comprehensive guide on using all of these tools, however, extensive reference materials are included that will provide many more details on their execution. Another point to note is that all of these tools are applicable for Fusion Middleware as a whole but specific products may or may not have implemented features to leverage them. A couple of the tools have a WebLogic Scripting Tool or 'WLST' interface. WLST is a command interface for executing pre-built functions and custom scripts against a domain. A detailed WLST tutorial is beyond the scope of this post but you can find general information here. There are more specific resources in the below sections. In this post when we refer to 'Enterprise Manager' or 'EM' we are referring to Enterprise Manager Fusion Middleware Control. RDA (Remote Diagnostic Agent) RDA is a standalone tool that is used to collect both static configuration and dynamic runtime information from the SOA environment. RDA is generally run manually from the command line against a domain or single server. When opening a new Service Request, including an RDA collection can dramatically decrease the back and forth required to collect logs and configuration information for Support. After installing RDA you configure it to use the SOA Suite module as decribed in the referenced resources. The SOA module includes the Oracle WebLogic Server (WLS) module by default in order to include all of the relevant information for the environment. In addition to this basic configuration there is also an advanced mode where you can set the number of thread dumps for the collections, log files, Incidents, etc. When would you use it? When creating a Service Request or otherwise working with Oracle resources on an issue, capturing environment snapshots to baseline your configuration or to diagnose an issue on your own. How is it related to the other tools? RDA is related to DFW in that it collects the last 10 Incidents from the server by default. In a similar manner, RDA is related to ODL through its collection of the diagnostic logs and these may contain information from Selective Tracing sessions. Examples of what it currently collects: (for details please see the links in the Resources section) Diagnostic Logs (ODL) Diagnostic Framework Incidents (DFW) SOA MDS Deployment Descriptors SOA Repository Summary Statistics Thread Dumps Complete Domain Configuration RDA Resources: Webcast Recording: Using RDA with Oracle SOA Suite 11g Blog Post: Diagnose SOA Suite 11g Issues Using RDA Download RDA How to Collect Analysis Information Using RDA for Oracle SOA Suite 11g Products [ID 1350313.1] How to Collect Analysis Information Using RDA for Oracle SOA Suite and BPEL Process Manager 11g [ID 1352181.1] Getting Started With Remote Diagnostic Agent: Case Study - Oracle WebLogic Server (Video) [ID 1262157.1] top DFW (Diagnostic Framework) DFW provides the ability to collect specific information for a particular problem when that problem occurs. DFW is included with your SOA Suite installation and deployed to the domain. Let's define the components of DFW. Diagnostic Dumps: Specific diagnostic collections that are defined at either the 'system' or product level. Examples would be diagnostic logs or thread dumps. Incident: A collection of Diagnostic Dumps associated with a particular problem Log Conditions: An Oracle Diagnostic Logging event that DFW is configured to listen for. If the event is identified then an Incident will be created. WLDF Watch: The WebLogic Diagnostic Framework or 'WLDF' is not a component of DFW, however, it can be a source of DFW Incident creation through the use of a 'Watch'. WLDF Notification: A Notification is a component of WLDF and is the link between the Watch and DFW. You can configure multiple Notification types in WLDF and associate them with your Watches. 'FMWDFW-notification' is available to you out of the box to allow for DFW notification of Watch execution. Rule: Defines a WLDF Watch or Log Condition for which we want to associate a set of Diagnostic Dumps. When triggered the specified dumps will be collected and added to the Incident Rule Action: Defines the specific Diagnostic Dumps to collect for a particular rule ADR: Automatic Diagnostics Repository; Defined for every server in a domain. This is where Incidents are stored Now let's walk through a simple flow: Oracle Web Services error message OWS-04086 (SOAP Fault) is generated on managed server 1 DFW Log Condition for OWS-04086 evaluates to TRUE DFW creates a new Incident in the ADR for managed server 1 DFW executes the specified Diagnostic Dumps and adds the output to the Incident In this case we'll grab the diagnostic log and thread dump. We might also want to collect the WSDL binding information and SOA audit trail When would you use it? When you want to automatically collect Diagnostic Dumps at a particular time using a trigger or when you want to manually collect the information. In either case it can be readily uploaded to Oracle Support through the Service Request. How is it related to the other tools? DFW generates Incidents which are collections of Diagnostic Dumps. One of the system level Diagonstic Dumps collects the current server diagnostic log which is generated by ODL and can contain information from Selective Tracing sessions. Incidents are included in RDA collections by default and ADRCI is a tool that is used to package an Incident for upload to Oracle Support. In addition, both ODL and DMS can be used to trigger Incident creation through DFW. The conditions and rules for generating Incidents can become quite complicated and the below resources go into more detail. A simpler approach to leveraging at least the Diagnostic Dumps is through WLST (WebLogic Scripting Tool) where there are commands to do the following: Create an Incident Execute a single Diagnostic Dump Describe a Diagnostic Dump List the available Diagnostic Dumps The WLST option offers greater control in what is generated and when. It can be a great help when collecting information for Support. There are overlaps with RDA, however, DFW is geared towards collecting specific runtime information when an issue occurs while existing Incidents are collected by RDA. There are 3 WLDF Watches configured by default in a SOA Suite 11g domain: Stuck Threads, Unchecked Exception and Deadlock. These Watches are enabled by default and will generate Incidents in ADR. They are configured to reset automatically after 30 seconds so they have the potential to create multiple Incidents if these conditions are consistent. The Incidents generated by these Watches will only contain System level Diagnostic Dumps. These same System level Diagnostic Dumps will be included in any application scoped Incident as well. Starting in 11.1.1.6, SOA Suite is including its own set of application scoped Diagnostic Dumps that can be executed from WLST or through a WLDF Watch or Log Condition. These Diagnostic Dumps can be added to an Incident such as in the earlier example using the error code OWS-04086. soa.config: MDS configuration files and deployed-composites.xml soa.composite: All artifacts related to the deployed composite soa.wsdl: Summary of endpoints configured for the composite soa.edn: EDN configuration summary if applicable soa.db: Summary DB information for the SOA repository soa.env: Coherence cluster configuration summary soa.composite.trail: Partial audit trail information for the running composite The current release of RDA has the option to collect the soa.wsdl and soa.composite Diagnostic Dumps. More Diagnostic Dumps for SOA Suite products are planned for future releases along with enhancements to DFW itself. DFW Resources: Webcast Recording: SOA Diagnostics Sessions: Diagnostic Framework Diagnostic Framework Documentation DFW WLST Command Reference Documentation for SOA Diagnostic Dumps in 11.1.1.6 top Selective Tracing Selective Tracing is a facility available starting in version 11.1.1.4 that allows you to increase the logging level for specific loggers and for a specific context. What this means is that you have greater capability to collect needed diagnostic log information in a production environment with reduced overhead. For example, a Selective Tracing session can be executed that only increases the log level for one composite, only one logger, limited to one server in the cluster and for a preset period of time. In an environment where dozens of composites are deployed this can dramatically reduce the volume and overhead of the logging without sacrificing relevance. Selective Tracing can be administered either from Enterprise Manager or through WLST. WLST provides a bit more flexibility in terms of exactly where the tracing is run. When would you use it? When there is an issue in production or another environment that lends itself to filtering by an available context criteria and increasing the log level globally results in too much overhead or irrelevant information. The information is written to the server diagnostic log and is exportable from Enterprise Manager How is it related to the other tools? Selective Tracing output is written to the server diagnostic log. This log can be collected by a system level Diagnostic Dump using DFW or through a default RDA collection. Selective Tracing also heavily leverages ODL fields to determine what to trace and to tag information that is part of a particular tracing session. Available Context Criteria: Application Name Client Address Client Host Composite Name User Name Web Service Name Web Service Port Selective Tracing Resources: Webcast Recording: SOA Diagnostics Session: Using Selective Tracing to Diagnose SOA Suite Issues How to Use Selective Tracing for SOA [ID 1367174.1] Selective Tracing WLST Reference top DMS (Dynamic Monitoring Service) DMS exposes runtime information for monitoring. This information can be monitored in two ways: Through the DMS servlet As exposed MBeans The servlet is deployed by default and can be accessed through http://<host>:<port>/dms/Spy (use administrative credentials to access). The landing page of the servlet shows identical columns of what are known as Noun Types. If you select a Noun Type you will see a table in the right frame that shows the attributes (Sensors) for the Noun Type and the available instances. SOA Suite has several exposed Noun Types that are available for viewing through the Spy servlet. Screenshots of the Spy servlet are available in the Knowledge Base article How to Monitor Runtime SOA Performance With the Dynamic Monitoring Service (DMS). Every Noun instance in the runtime is exposed as an MBean instance. As such they are generally available through an MBean browser and available for monitoring through WLDF. You can configure a WLDF Watch to monitor a particular attribute and fire a notification when the threshold is exceeded. A WLDF Watch can use the out of the box DFW notification type to notify DFW to create an Incident. When would you use it? When you want to monitor a metric or set of metrics either manually or through an automated system. When you want to trigger a WLDF Watch based on a metric exposed through DMS. How is it related to the other tools? DMS metrics can be monitored with WLDF Watches which can in turn notify DFW to create an Incident. DMS Resources: How to Monitor Runtime SOA Performance With the Dynamic Monitoring Service (DMS) [ID 1368291.1] How to Reset a SOA 11g DMS Metric DMS Documentation top ODL (Oracle Diagnostic Logging) ODL is the primary facility for most Fusion Middleware applications to log what they are doing. Whenever you change a logging level through Enterprise Manager it is ultimately exposed through ODL and written to the server diagnostic log. A notable exception to this is WebLogic Server which uses its own log format / file. ODL logs entries in a consistent, structured way using predefined fields and name/value pairs. Here's an example of a SOA Suite entry: [2012-04-25T12:49:28.083-06:00] [AdminServer] [ERROR] [] [oracle.soa.bpel.engine] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: ] [ecid: 0963fdde7e77631c:-31a6431d:136eaa46cda:-8000-00000000000000b4,0] [errid: 41] [WEBSERVICE_PORT.name: BPELProcess2_pt] [APP: soa-infra] [composite_name: TestProject2] [J2EE_MODULE.name: fabric] [WEBSERVICE.name: bpelprocess1_client_ep] [J2EE_APP.name: soa-infra] Error occured while handling a post operation[[ When would you use it? You'll use ODL almost every time you want to identify and diagnose a problem in the environment. The entries are written to the server diagnostic log. How is it related to the other tools? The server diagnostic logs are collected by DFW and RDA. Selective Tracing writes its information to the diagnostic log as well. Additionally, DFW log conditions are triggered by ODL log events. ODL Resources: ODL Documentation top ADR (Automatic Diagnostics Repository) ADR is not a tool in and of itself but is where DFW stores the Incidents it creates. Every server in the domain has an ADR location which can be found under <SERVER_HOME>/adr. This is referred to the as the ADR 'Base' location. ADR also has what are known as 'Home' locations. Example: You have a domain called 'myDomain' and an associated managed server called 'myServer'. Your admin server is called 'AdminServer'. Your domain home directory is called 'myDomain' and it contains a 'servers' directory. The 'servers' directory contains a directory for the managed server called 'myServer' and here is where you'll find the 'adr' directory which is the ADR 'Base' location for myServer. To get to the ADR 'Home' locations we drill through a few levels: diag/ofm/myDomain/ In an 11.1.1.6 SOA Suite domain you will see 2 directories here, 'myServer' and 'soa-infra'. These are the ADR 'Home' locations. 'myServer' is the 'system' ADR home and contains system level Incidents. 'soa-infra' is the name that SOA Suite used to register with DFW and this ADR home contains SOA Suite related Incidents Each ADR home location contains a series of directories, one of which is called 'incident'. This is where your Incidents are stored. When would you use it? It's a good idea to check on these locations from time to time to see whether a lot of Incidents are being generated. They can be cleaned out by deleting the Incident directories or through the ADRCI tool. If you know that an Incident is of particular interest for an issue you're working with Oracle you can simply zip it up and provide it. How does it relate to the other tools? ADR is obviously very important for DFW since it's where the Incidents are stored. Incidents contain Diagnostic Dumps that may relate to diagnostic logs (ODL) and DMS metrics. The most recent 10 Incident directories are collected by RDA by default and ADRCI relies on the ADR locations to help manage the contents. top ADRCI (Automatic Diagnostics Repository Command Interpreter) ADRCI is a command line tool for packaging and managing Incidents. When would you use it? When purging Incidents from an ADR Home location or when you want to package an Incident along with an offline RDA collection for upload to Oracle Support. How does it relate to the other tools? ADRCI contains a tool called the Incident Packaging System or IPS. This is used to package an Incident for upload to Oracle Support through a Service Request. Starting in 11.1.1.6 IPS will attempt to collect an offline RDA collection and include it with the Incident package. This will only work if Perl is available on the path, otherwise it will give a warning and package only the Incident files. ADRCI Resources: How to Use the Incident Packaging System (IPS) in SOA 11g [ID 1381259.1] ADRCI Documentation top WLDF (WebLogic Diagnostic Framework) WLDF is functionality available in WebLogic Server since version 9. Starting with FMw 11g a link has been added between WLDF and the pre-existing DFW, the WLDF Watch Notification. Let's take a closer look at the flow: There is a need to monitor the performance of your SOA Suite message processing A WLDF Watch is created in the WLS console that will trigger if the average message processing time exceeds 2 seconds. This metric is monitored through a DMS MBean instance. The out of the box DFW Notification (the Notification is called FMWDFW-notification) is added to the Watch. Under the covers this notification is of type JMX. The Watch is triggered when the threshold is exceeded and fires the Notification. DFW has a listener that picks up the Notification and evaluates it according to its rules, etc When it comes to automatic Incident creation, WLDF is a key component with capabilities that will grow over time. When would you use it? When you want to monitor the WLS server log or an MBean metric for some condition and fire a notification when the Watch is triggered. How does it relate to the other tools? WLDF is used to automatically trigger Incident creation through DFW using the DFW Notification. WLDF Resources: How to Monitor Runtime SOA Performance With the Dynamic Monitoring Service (DMS) [ID 1368291.1] How To Script the Creation of a SOA WLDF Watch in 11g [ID 1377986.1] WLDF Documentation top

  Read the article

• Best in-memory cache of DB objects for Silverlight [closed]

  - by Jon

  Hi, I'd like to set up a cache of database objects (i.e. rows in a table) in memory in silverlight, which I'll do using WCF and linq-to-sql. Once I have the objects in memory, I'm planning on using MSMQ to receive new objects whenever they have been modified. It's a somewhat complex approach but the goal is to reduce trips to the database and allow instant data communication between Silverlight applications that are connected to the MSMQ. My Silverlight applications are meant to be long-running and the amount of data to be cached will not be large. I'm planning on saving the in-memory cache using local storage. Anyway, in order to process the updated objects that come in, I'd like to know if the user has changed the existing object. Could I use some event relating to data-binding to set a flag indicating that the object has changes? Maybe there's a better way to do the cache entirely? Thanks!

  Read the article

• Oracle Demantra BAL Migration

  - by Annemarie Provisero

  ADVISOR WEBCAST: Oracle Demantra BAL Migration PRODUCT FAMILY:  Manufacturing December 7, 2011 at 8 am PT, 9 am MT, 11 am ET This one-hour live advisor webcast provides Application Consultants, Administrative and Technical Users, and Customers with and introduction to the BAL Migration utility and details steps involved in migration process. The information provided trains you on leveraging BAL migration utility to migrate Demantra application objects from one environment to another. TOPICS WILL INCLUDE: Introduction to BAL Migration BAL Migration Steps Schema Setups BAL Repository Object Migration A short, live demonstration (only if applicable) and question and answer period will be included. Oracle Advisor Webcasts are dedicated to building your awareness around our products and services. This session does not replace offerings from Oracle Global Support Services. Click here to register for this session ------------------------------------------------------------------------------------------------------------- The above webcast is a service of the E-Business Suite Communities in My Oracle Support. For more information on other webcasts, please reference the Oracle Advisor Webcast Schedule.Click here to visit the E-Business Communities in My Oracle Support Note that all links require access to My Oracle Support.

  Read the article

• Use Drive Mirroring for Instant Backup in Windows 7

  - by Trevor Bekolay

  Even with the best backup solution, a hard drive crash means you’ll lose a few hours of work. By enabling drive mirroring in Windows 7, you’ll always have an up-to-date copy of your data. Windows 7’s mirroring – which is only available in Professional, Enterprise, and Ultimate editions – is a software implementation of RAID 1, which means that two or more disks are holding the exact same data. The files are constantly kept in sync, so that if one of the disks fails, you won’t lose any data. Note that mirroring is not technically a backup solution, because if you accidentally delete a file, it’s gone from both hard disks (though you may be able to recover the file). As an additional caveat, having mirrored disks requires changing them to “dynamic disks,” which can only be read within modern versions of Windows (you may have problems working with a dynamic disk in other operating systems or in older versions of Windows). See this Wikipedia page for more information. You will need at least one empty disk to set up disk mirroring. We’ll show you how to mirror an existing disk (of equal or lesser size) without losing any data on the mirrored drive, and how to set up two empty disks as mirrored copies from the get-go. Mirroring an Existing Drive Click on the start button and type partitions in the search box. Click on the Create and format hard disk partitions entry that shows up. Alternatively, if you’ve disabled the search box, press Win+R to open the Run window and type in: diskmgmt.msc The Disk Management window will appear. We’ve got a small disk, labeled OldData, that we want to mirror in a second disk of the same size. Note: The disk that you will use to mirror the existing disk must be unallocated. If it is not, then right-click on it and select Delete Volume… to mark it as unallocated. This will destroy any data on that drive. Right-click on the existing disk that you want to mirror. Select Add Mirror…. Select the disk that you want to use to mirror the existing disk’s data and press Add Mirror. You will be warned that this process will change the existing disk from basic to dynamic. Note that this process will not delete any data on the disk! The new disk will be marked as a mirror, and it will starting copying data from the existing drive to the new one. Eventually the drives will be synced up (it can take a while), and any data added to the E: drive will exist on both physical hard drives. Setting Up Two New Drives as Mirrored If you have two new equal-sized drives, you can format them to be mirrored copies of each other from the get-go. Open the Disk Management window as described above. Make sure that the drives are unallocated. If they’re not, and you don’t need the data on either of them, right-click and select Delete volume…. Right-click on one of the unallocated drives and select New Mirrored Volume…. A wizard will pop up. Click Next. Click on the drives you want to hold the mirrored data and click Add. Note that you can add any number of drives. Click Next. Assign it a drive letter that makes sense, and then click Next. You’re limited to using the NTFS file system for mirrored drives, so enter a volume label, enable compression if you want, and then click Next. Click Finish to start formatting the drives. You will be warned that the new drives will be converted to dynamic disks. And that’s it! You now have two mirrored drives. Any files added to E: will reside on both physical disks, in case something happens to one of them. Conclusion While the switch from basic to dynamic disks can be a problem for people who dual-boot into another operating system, setting up drive mirroring is an easy way to make sure that your data can be recovered in case of a hard drive crash. Of course, even with drive mirroring, we advocate regular backups to external drives or online backup services. Similar Articles Productive Geek Tips Rebit Backup Software [Review]Disabling Instant Search in Outlook 2007Restore Files from Backups on Windows Home ServerSecond Copy 7 [Review]Backup Windows Home Server Folders to an External Hard Drive TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 VMware Workstation 7 Acronis Online Backup Windows Firewall with Advanced Security – How To Guides Sculptris 1.0, 3D Drawing app AceStock, a Tiny Desktop Quote Monitor Gmail Button Addon (Firefox) Hyperwords addon (Firefox) Backup Outlook 2010

  Read the article

< Previous Page | 395 396 397 398 399 400 401 402 403 404 405 406  | Next Page >