Search Results

Search found 11042 results on 442 pages for 'side'.

Page 399/442 | < Previous Page | 395 396 397 398 399 400 401 402 403 404 405 406  | Next Page >

• How to Buy an SD Card: Speed Classes, Sizes, and Capacities Explained

  - by Chris Hoffman

  Memory cards are used in digital cameras, music players, smartphones, tablets, and even laptops. But not all SD cards are created equal — there are different speed classes, physical sizes, and capacities to consider. Different devices require different types of SD cards. Here are the differences you’ll need to keep in mind when picking out the right SD card for your device. Speed Class In a nutshell, not all SD cards offer the same speeds. This matters for some tasks more than it matters for others. For example, if you’re a professional photographer taking photos in rapid succession on a DSLR camera saving them in high-resolution RAW format, you’ll want a fast SD card so your camera can save them as fast as possible. A fast SD card is also important if you want to record high-resolution video and save it directly to the SD card. If you’re just taking a few photos on a typical consumer camera or you’re just using an SD card to store some media files on your smartphone, the speed isn’t as important. Manufacturers use “speed classes” to measure an SD card’s speed. The SD Association that defines the SD card standard doesn’t actually define the exact speeds associated with these classes, but they do provide guidelines. There are four different speed classes — 10, 8, 4, and 2. 10 is the fastest, while 2 is the slowest. Class 2 is suitable for standard definition video recording, while classes 4 and 6 are suitable for high-definition video recording. Class 10 is suitable for “full HD video recording” and “HD still consecutive recording.” There are also two Ultra High Speed (UHS) speed classes, but they’re more expensive and are designed for professional use. UHS cards are designed for devices that support UHS. Here are the associated logos, in order from slowest to fastest:       You’ll probably be okay with a class 4 or 6 card for typical use in a digital camera, smartphone, or tablet. Class 10 cards are ideal if you’re shooting high-resolution videos or RAW photos. Class 2 cards are a bit on the slow side these days, so you may want to avoid them for all but the cheapest digital cameras. Even a cheap smartphone can record HD video, after all. An SD card’s speed class is identified on the SD card itself. You’ll also see the speed class on the online store listing or on the card’s packaging when purchasing it. For example, in the below photo, the middle SD card is speed class 4, while the two other cards are speed class 6. If you see no speed class symbol, you have a class 0 SD card. These cards were designed and produced before the speed class rating system was introduced. They may be slower than even a class 2 card. Physical Size Different devices use different sizes of SD cards. You’ll find standard-size CD cards, miniSD cards, and microSD cards. Standard SD cards are the largest, although they’re still very small. They measure 32x24x2.1 mm and weigh just two grams. Most consumer digital cameras for sale today still use standard SD cards. They have the standard “cut corner”  design. miniSD cards are smaller than standard SD cards, measuring 21.5x20x1.4 mm and weighing about 0.8 grams. This is the least common size today. miniSD cards were designed to be especially small for mobile phones, but we now have a smaller size. microSD cards are the smallest size of SD card, measuring 15x11x1 mm and weighing just 0.25 grams. These cards are used in most cell phones and smartphones that support SD cards. They’re also used in many other devices, such as tablets. SD cards will only fit into marching slots. You can’t plug a microSD card into a standard SD card slot — it won’t fit. However, you can purchase an adapter that allows you to plug a smaller SD card into a larger SD card’s form and fit it into the appropriate slot. Capacity Like USB flash drives, hard drives, solid-state drives, and other storage media, different SD cards can have different amounts of storage. But the differences between SD card capacities don’t stop there. Standard SDSC (SD) cards are 1 MB to 2 GB in size, or perhaps 4 GB in size — although 4 GB is non-standard. The SDHC standard was created later, and allows cards 2 GB to 32 GB in size. SDXC is a more recent standard that allows cards 32 GB to 2 TB in size. You’ll need a device that supports SDHC or SDXC cards to use them. At this point, the vast majority of devices should support SDHC. In fact, the SD cards you have are probably SDHC cards. SDXC is newer and less common. When buying an SD card, you’ll need to buy the right speed class, size, and capacity for your needs. Be sure to check what your device supports and consider what speed and capacity you’ll actually need. Image Credit: Ryosuke SEKIDO on Flickr, Clive Darra on Flickr, Steven Depolo on Flickr

  Read the article

• Liskov Substitution Principle and the Oft Forgot Third Wheel

  - by Stacy Vicknair

  Liskov Substitution Principle (LSP) is a principle of object oriented programming that many might be familiar with from the SOLID principles mnemonic from Uncle Bob Martin. The principle highlights the relationship between a type and its subtypes, and, according to Wikipedia, is defined by Barbara Liskov and Jeanette Wing as the following principle:   Let be a property provable about objects of type . Then should be provable for objects of type where is a subtype of .   Rectangles gonna rectangulate The iconic example of this principle is illustrated with the relationship between a rectangle and a square. Let’s say we have a class named Rectangle that had a property to set width and a property to set its height. 1: Public Class Rectangle 2: Overridable Property Width As Integer 3: Overridable Property Height As Integer 4: End Class   We all at some point here that inheritance mocks an “IS A” relationship, and by gosh we all know square IS A rectangle. So let’s make a square class that inherits from rectangle. However, squares do maintain the same length on every side, so let’s override and add that behavior. 1: Public Class Square 2: Inherits Rectangle 3:  4: Private _sideLength As Integer 5:  6: Public Overrides Property Width As Integer 7: Get 8: Return _sideLength 9: End Get 10: Set(value As Integer) 11: _sideLength = value 12: End Set 13: End Property 14:  15: Public Overrides Property Height As Integer 16: Get 17: Return _sideLength 18: End Get 19: Set(value As Integer) 20: _sideLength = value 21: End Set 22: End Property 23: End Class   Now, say we had the following test: 1: Public Sub SetHeight_DoesNotAffectWidth(rectangle As Rectangle) 2: 'arrange 3: Dim expectedWidth = 4 4: rectangle.Width = 4 5:  6: 'act 7: rectangle.Height = 7 8:  9: 'assert 10: Assert.AreEqual(expectedWidth, rectangle.Width) 11: End Sub   If we pass in a rectangle, this test passes just fine. What if we pass in a square?   This is where we see the violation of Liskov’s Principle! A square might "IS A” to a rectangle, but we have differing expectations on how a rectangle should function than how a square should! Great expectations Here’s where we pat ourselves on the back and take a victory lap around the office and tell everyone about how we understand LSP like a boss. And all is good… until we start trying to apply it to our work. If I can’t even change functionality on a simple setter without breaking the expectations on a parent class, what can I do with subtyping? Did Liskov just tell me to never touch subtyping again? The short answer: NO, SHE DIDN’T. When I first learned LSP, and from those I’ve talked with as well, I overlooked a very important but not appropriately stressed quality of the principle: our expectations. Our inclination is to want a logical catch-all, where we can easily apply this principle and wipe our hands, drop the mic and exit stage left. That’s not the case because in every different programming scenario, our expectations of the parent class or type will be different. We have to set reasonable expectations on the behaviors that we expect out of the parent, then make sure that those expectations are met by the child. Any expectations not explicitly expected of the parent aren’t expected of the child either, and don’t register as a violation of LSP that prevents implementation. You can see the flexibility mentioned in the Wikipedia article itself: A typical example that violates LSP is a Square class that derives from a Rectangle class, assuming getter and setter methods exist for both width and height. The Square class always assumes that the width is equal with the height. If a Square object is used in a context where a Rectangle is expected, unexpected behavior may occur because the dimensions of a Square cannot (or rather should not) be modified independently. This problem cannot be easily fixed: if we can modify the setter methods in the Square class so that they preserve the Square invariant (i.e., keep the dimensions equal), then these methods will weaken (violate) the postconditions for the Rectangle setters, which state that dimensions can be modified independently. Violations of LSP, like this one, may or may not be a problem in practice, depending on the postconditions or invariants that are actually expected by the code that uses classes violating LSP. Mutability is a key issue here. If Square and Rectangle had only getter methods (i.e., they were immutable objects), then no violation of LSP could occur. What this means is that the above situation with a rectangle and a square can be acceptable if we do not have the expectation for width to leave height unaffected, or vice-versa, in our application. Conclusion – the oft forgot third wheel Liskov Substitution Principle is meant to act as a guidance and warn us against unexpected behaviors. Objects can be stateful and as a result we can end up with unexpected situations if we don’t code carefully. Specifically when subclassing, make sure that the subclass meets the expectations held to its parent. Don’t let LSP think you cannot deviate from the behaviors of the parent, but understand that LSP is meant to highlight the importance of not only the parent and the child class, but also of the expectations WE set for the parent class and the necessity of meeting those expectations in order to help prevent sticky situations.   Code examples, in both VB and C# Technorati Tags: LSV,Liskov Substitution Principle,Uncle Bob,Robert Martin,Barbara Liskov,Liskov

  Read the article

• Recover that Photo, Picture or File You Deleted Accidentally

  - by The Geek

  Have you ever accidentally deleted a photo on your camera, computer, USB drive, or anywhere else? What you might not know is that you can usually restore those pictures—even from your camera’s memory stick. Windows tries to prevent you from making a big mistake by providing the Recycle Bin, where deleted files hang around for a while—but unfortunately it doesn’t work for external USB drives, USB flash drives, memory sticks, or mapped drives. The great news is that this technique also works if you accidentally deleted the photo… from the camera itself. That’s what happened to me, and prompted writing this article. Restore that File or Photo using Recuva The first piece of software that you’ll want to try is called Recuva, and it’s extremely easy to use—just make sure when you are installing it, that you don’t accidentally install that stupid Yahoo! toolbar that nobody wants. Now that you’ve installed the software, and avoided an awful toolbar installation, launch the Recuva wizard and let’s start through the process of recovering those pictures you shouldn’t have deleted. The first step on the wizard page will let you tell Recuva to only search for a specific type of file, which can save a lot of time while searching, and make it easier to find what you are looking for. Next you’ll need to specify where the file was, which will obviously be up to wherever you deleted it from. Since I deleted mine from my camera’s SD card, that’s where I’m looking for it. The next page will ask you whether you want to do a Deep Scan. My recommendation is to not select this for the first scan, because usually the quick scan can find it. You can always go back and run a deep scan a second time. And now, you’ll see all of the pictures deleted from your drive, memory stick, SD card, or wherever you searched. Looks like what happened in Vegas didn’t stay in Vegas after all… If there are a really large number of results, and you know exactly when the file was created or modified, you can switch to the advanced view, where you can sort by the last modified time. This can help speed up the process quite a bit, so you don’t have to look through quite as many files. At this point, you can right-click on any filename, and choose to Recover it, and then save the files elsewhere on your drive. Awesome! Restore that File or Photo using DiskDigger If you don’t have any luck with Recuva, you can always try out DiskDigger, another excellent piece of software. I’ve tested both of these applications very thoroughly, and found that neither of them will always find the same files, so it’s best to have both of them in your toolkit. Note that DiskDigger doesn’t require installation, making it a really great tool to throw on your PC repair Flash drive. Start off by choosing the drive you want to recover from…   Now you can choose whether to do a deep scan, or a really deep scan. Just like with Recuva, you’ll probably want to select the first one first. I’ve also had much better luck with the regular scan, rather than the “dig deeper” one. If you do choose the “dig deeper” one, you’ll be able to select exactly which types of files you are looking for, though again, you should use the regular scan first. Once you’ve come up with the results, you can click on the items on the left-hand side, and see a preview on the right.  You can select one or more files, and choose to restore them. It’s pretty simple! Download DiskDigger from dmitrybrant.com Download Recuva from piriform.com Good luck recovering your deleted files! And keep in mind, DiskDigger is a totally free donationware software from a single, helpful guy… so if his software helps you recover a photo you never thought you’d see again, you might want to think about throwing him a dollar or two. Similar Articles Productive Geek Tips Stupid Geek Tricks: Undo an Accidental Move or Delete With a Keyboard ShortcutRestore Accidentally Deleted Files with RecuvaCustomize Your Welcome Picture Choices in Windows VistaAutomatically Resize Picture Attachments in Outlook 2007Resize Your Photos with Easy Thumbnails TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Icelandic Volcano Webcams Open Multiple Links At One Go NachoFoto Searches Images in Real-time Office 2010 Product Guides Google Maps Place marks – Pizza, Guns or Strip Clubs Monitor Applications With Kiwi

  Read the article

• SQL SERVER – SmallDateTime and Precision – A Continuous Confusion

  - by pinaldave

  Some kinds of confusion never go away. Here is one of the ancient confusing things in SQL. The precision of the SmallDateTime is one concept that confuses a lot of people, proven by the many messages I receive everyday relating to this subject. Let me start with the question: What is the precision of the SMALLDATETIME datatypes? What is your answer? Write it down on your notepad. Now if you do not want to continue reading the blog post, head to my previous blog post over here: SQL SERVER – Precision of SMALLDATETIME. A Social Media Question Since the increase of social media conversations, I noticed that the amount of the comments I receive on this blog is a bit staggering. I receive lots of questions on facebook, twitter or Google+. One of the very interesting questions yesterday was asked on Facebook by Raghavendra. I am re-organizing his script and asking all of the questions he has asked me. Let us see if we could help him with his question: CREATE TABLE #temp (name VARCHAR(100),registered smalldatetime) GO DECLARE @test smalldatetime SET @test=GETDATE() INSERT INTO #temp VALUES ('Value1',@test) INSERT INTO #temp VALUES ('Value2',@test) GO SELECT * FROM #temp ORDER BY registered DESC GO DROP TABLE #temp GO Now when the above script is ran, we will get the following result: Well, the expectation of the query was to have the following result. The row which was inserted last was expected to return as first row in result set as the ORDER BY descending. Side note: Because the requirement is to get the latest data, we can’t use any  column other than smalldatetime column in order by. If we use name column in the order by, we will get an incorrect result as it can be any name. My Initial Reaction My initial reaction was as follows: 1) DataType DateTime2: If file precision of the column is expected from the column which store date and time, it should not be smalldatetime. The precision of the column smalldatetime is One Minute (Read Here) for finer precision use DateTime or DateTime2 data type. Here is the code which includes above suggestion: CREATE TABLE #temp (name VARCHAR(100), registered datetime2) GO DECLARE @test datetime2 SET @test=GETDATE() INSERT INTO #temp VALUES ('Value1',@test) INSERT INTO #temp VALUES ('Value2',@test) GO SELECT * FROM #temp ORDER BY registered DESC GO DROP TABLE #temp GO 2) Tie Breaker Identity: There are always possibilities that two rows were inserted at the same time. In that case, you may need a tie breaker. If you have an increasing identity column, you can use that as a tie breaker as well. CREATE TABLE #temp (ID INT IDENTITY(1,1), name VARCHAR(100),registered datetime2) GO DECLARE @test datetime2 SET @test=GETDATE() INSERT INTO #temp VALUES ('Value1',@test) INSERT INTO #temp VALUES ('Value2',@test) GO SELECT * FROM #temp ORDER BY ID DESC GO DROP TABLE #temp GO Those two were the quick suggestions I provided. It is not necessary that you should use both advices. It is possible that one can use only DATETIME datatype or Identity column can have datatype of BIGINT or have another tie breaker. An Alternate NO Solution In the facebook thread this was also discussed as one of the solutions: CREATE TABLE #temp (name VARCHAR(100),registered smalldatetime) GO DECLARE @test smalldatetime SET @test=GETDATE() INSERT INTO #temp VALUES ('Value1',@test) INSERT INTO #temp VALUES ('Value2',@test) GO SELECT name, registered, ROW_NUMBER() OVER(ORDER BY registered DESC) AS "Row Number" FROM #temp ORDER BY 3 DESC GO DROP TABLE #temp GO However, I believe it is not the solution and can be further misleading if used in a production server. Here is the example of why it is not a good solution: CREATE TABLE #temp (name VARCHAR(100) NOT NULL,registered smalldatetime) GO DECLARE @test smalldatetime SET @test=GETDATE() INSERT INTO #temp VALUES ('Value1',@test) INSERT INTO #temp VALUES ('Value2',@test) GO -- Before Index SELECT name, registered, ROW_NUMBER() OVER(ORDER BY registered DESC) AS "Row Number" FROM #temp ORDER BY 3 DESC GO -- Create Index ALTER TABLE #temp ADD CONSTRAINT [PK_#temp] PRIMARY KEY CLUSTERED (name DESC) GO -- After Index SELECT name, registered, ROW_NUMBER() OVER(ORDER BY registered DESC) AS "Row Number" FROM #temp ORDER BY 3 DESC GO DROP TABLE #temp GO Now let us examine the resultset. You will notice that an index which is created on the base table which is (indeed) schema change the table but can affect the resultset. As you can see, an index can change the resultset, so this method is not yet perfect to get the latest inserted resultset. No Schema Change Requirement After giving these two suggestions, I was waiting for the feedback of the asker. However, the requirement of the asker was there can’t be any schema change because the application was used by many other applications. I validated again, and of course, the requirement is no schema change at all. No addition of the column of change of datatypes of any other columns. There is no further help as well. This is indeed an interesting question. I personally can’t think of any solution which I could provide him given the requirement of no schema change. Can you think of any other solution to this? Need of Database Designer This question once again brings up another ancient question:  “Do we need a database designer?” I often come across databases which are facing major performance problems or have redundant data. Normalization is often ignored when a database is built fast under a very tight deadline. Often I come across a database which has table with unnecessary columns and performance problems. While working as Developer Lead in my earlier jobs, I have seen developers adding columns to tables without anybody’s consent and retrieving them as SELECT *.  There is a lot to discuss on this subject in detail, but for now, let’s discuss the question first. Do you have any suggestions for the above question? Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: CodeProject, Developer Training, PostADay, SQL, SQL Authority, SQL DateTime, SQL Query, SQL Server, SQL Tips and Tricks, SQLServer, T SQL, Technology

  Read the article

• AS11 Oracle B2B Sync Support - Series 2

  - by sinkarbabu.kirubanithi

  In the earlier series, we discussed about how to model "Sync Support" in Oracle B2B. And, we haven't discussed how the response can be consumed synchronously by the back-end application or initiator of sync request. In this sequel, we will see how we can extend it to the SOA composite applications to model the end-to-end usecase, this would help the initiator of sync request to receive the response synchronously. Series 2 - is little lengthier for blog standards so be prepared before you continue further :). Let's start our discussion with a high-level scenario where one need to initiate a synchronous request and get response synchronously. There are various approaches available, we will see one simplest approach here. Components Involved: 1. Oracle B2B 2. Oracle JCA JMS Adapter 3. Oracle BPEL 4. All of the above are wrapped up in a single SOA composite application. Oracle B2B: Skipping the "Sync Support" setup part in B2B, as we have already discussed that in the earlier series 1. Here we have provided "Sync Support" samples that can be imported to B2B directly and users can start testing the same in few minutes. Initiator Sample: This requires two JMS queues to be created, one for B2B to receive initial outbound sync request and the other is for B2B to deliver the incoming sync response to the back-end. Please enable "Use JMS Id" option in both internal listening and delivery channels. This would enable JCA JMS Adapter to correlate the initial B2B request and response and in turn it would be returned as synchronous response of BPEL. Internal Listening Channel Image: Internal Delivery Channel Image: To get going without much challenges, just create queues in Weblogic with the JNDI mentioned in the above two screenshots. If you want to use different names, then you may have to change the queue jndi names in sample after importing it into B2B. Here are the Queue related JNDI names used in the sample, 1. Internal Listening Channel Queue details, Name: JNDI Name: jms/b2b/syncreplyqueue 2. Internal Delivery Channel Queue details, Name: JNDI Name: jms/b2b/syncrequestqueue Here is the Initiator Sample Acme.zip Note: You may have to adjust the ip address of GlobalChips endpoint in the Delivery Channel. Responder Sample: Contains B2B meta-data and the Callout. Just import the sample and place the callout binary under "/tmp/callout" directory. If you choose to use a different location for callout, then you may have to change the same in B2B Configuration after importing the sample. Here are the artifacts, 1. Callout Source SampleCallout.java 2. Callout Binary sample-callout.jar 3. Responder Sample GlobalChips.zip Callout Details: Just gives the static response XML that needs to be sent back as response for the inbound sync request. For a sample purpose, we have given static response but in production you may have to invoke a web service or something similar to get the response. IMPORTANT NOTE: For Sync Support use case, responder is not expected to deliver the inbound sync request to backend as the process of delivering and getting the response from backend are expected from the Callout. This default behavior can be overridden by enabling the config property "b2b.SyncAppDelivery=true" in B2B config mbean (b2b-config.xml). This makes B2B to deliver the inbound sync request to be delivered to backend queue but the response to be sent to remote caller still has to come from Callout. 2. Oracle JCA JMS Adapter: On the initiator side, we have used JCA JMS Request/Reply pattern to send/receive the synchronous message from B2B. 3. Oracle BPEL: Exposes WS-SOAP Endpoint that takes payload as input and passes the same to B2B and returns the synchronous response of B2B as SOAP response. For outside world, it looks as if it is the synchronous web service endpoint but under the cover it uses JMS to trigger/initiate B2B to send and receive the synchronous response. 4. Composite application: All the components discussed above are wired in SOA composite application that helps to model a end-to-end synchronous use case. Here's the composite application sca_B2BSyncSample_rev1.0.jar, you may just deploy this to your AS11 SOA to make use of it. For any editing, you can just import the project in your JDEV under any SOA Application. Here are the composite application screenshots, Composite Application: BPEL With JCA JMS Adapter (Request/Reply):

  Read the article

• [GEEK SCHOOL] Network Security 3: Windows Defender and a Malware-Free System

  - by Ciprian Rusen

  In this second lesson we are going to talk about one of the most confusing security products that are bundled with Windows: Windows Defender. In the past, this product has had a bad reputation and for good reason – it was very limited in its capacity to protect your computer from real-world malware. However, the latest version included in Windows 8.x operating systems is much different than in the past and it provides real protection to its users. The nice thing about Windows Defender in its current incarnation, is that it protects your system from the start, so there are never gaps in coverage. We will start this lesson by explaining what Windows Defender is in Windows 7 and Vista versus what it is in Windows 8, and what product to use if you are using an earlier version. We next will explore how to use Windows Defender, how to improve its default settings, and how to deal with the alerts that it displays. As you will see, Windows Defender will have you using its list of quarantined items a lot more often than other security products. This is why we will explain in detail how to work with it and remove malware for good or restore those items that are only false alarms. Lastly, you will learn how to turn off Windows Defender if you no longer want to use it and you prefer a third-party security product in its place and then how to enable it back, if you have changed your mind about using it. Upon completion, you should have a thorough understanding of your system’s default anti-malware options, or how to protect your system expeditiously. What is Windows Defender? Unfortunately there is no one clear answer to this question because of the confusing way Microsoft has chosen to name its security products. Windows Defender is a different product, depending on the Windows operating system you are using. If you use Windows Vista or Windows 7, then Windows Defender is a security tool that protects your computer from spyware. This but one form of malware made out of tools and applications that monitor your movements on the Internet or the activities you make on your computer. Spyware tends to send the information that is collected to a remote server and it is later used in all kinds of malicious purposes, from displaying advertising you don’t want, to using your personal data, etc. However, there are many other types of malware on the Internet and this version of Windows Defender is not able to protect users from any of them. That’s why, if you are using Windows 7 or earlier, we strongly recommend that you disable Windows Defender and install a more complete security product like Microsoft Security Essentials, or third-party security products from specialized security vendors. If you use Windows 8.x operating systems, then Windows Defender is the same thing as Microsoft Security Essentials: a decent security product that protects your computer in-real time from viruses and spyware. The fact that this product protects your computer also from viruses, not just from spyware, makes a huge difference. If you don’t want to pay for security products, Windows Defender in Windows 8.x and Microsoft Security Essentials (in Windows 7 or earlier) are good alternatives. Windows Defender in Windows 8.x and Microsoft Security Essentials are the same product, only their name is different. In this lesson, we will use the Windows Defender version from Windows 8.x but our instructions apply also to Microsoft Security Essentials (MSE) in Windows 7 and Windows Vista. If you want to download Microsoft Security Essentials and try it out, we recommend you to use this page: Download Microsoft Security Essentials. There you will find both 32-bit and 64-bit editions of this product as well versions in multiple languages. How to Use and Configure Windows Defender Using Windows Defender (MSE) is very easy to use. To start, search for “defender” on the Windows 8.x Start screen and click or tap the “Windows Defender” search result. In Windows 7, search for “security” in the Start Menu search box and click “Microsoft Security Essentials”. Windows Defender has four tabs which give you access to the following tools and options: Home – here you can view the security status of your system. If everything is alright, then it will be colored in green. If there are some warnings to consider, then it will be colored in yellow, and if there are threats that must be dealt with, everything will be colored in red. On the right side of the “Home” tab you will find options for scanning your computer for viruses and spyware. On the bottom of the tab you will find information about when the last scan was performed and what type of scan it was. Update – here you will find information on whether this product is up-to-date. You will learn when it was last updated and the versions of the definitions it is using. You can also trigger a manual update. History – here you can access quarantined items, see which items you’ve allowed to run on your PC even if they were identified as malware by Windows Defender, and view a complete list with all the malicious items Windows Defender has detected on your PC. In order to access all these lists and work with them, you need to be signed in as an administrator. Settings – this is the tab where you can turn on the real-time protection service, exclude files, file types, processes, and locations from its scans as well as access a couple of more advanced settings. The only difference between Windows Defender in Windows 8.x and Microsoft Security Essentials (in Windows 7 or earlier) is that, in the “Settings” tab, Microsoft Security Essentials allows you to set when to run scheduled scans while Windows Defender lacks this option.

  Read the article

• GlassFish Clustering with DCOM on Windows

  - by ByronNevins

  DCOM - Distributed COM, a Microsoft protocol for communicating with Windows machines. Why use DCOM? In GlassFish 3.1 SSH is used as the standard way to run commands on remote nodes for clustering.  It is very difficult for users to get SSH configured properly on Windows.  SSH does not come with Windows so we have to depend on third party tools.  And then the user is forced to install and configure these tools -- which can be tricky. DCOM is available on all supported platforms.  It is built-in to Windows. The idea is to use DCOM to communicate with remote Windows nodes.  This has the huge advantage that the user has to do minimal, if any, configuration on the Windows nodes. Implementation HighlightsTwo open Source Libraries have been added to GlassFish: Jcifs – a SAMBA implementation in Java J-interop – A Java implementation for making DCOM calls to remote Windows computers.   Note that any supported platform can use DCOM to work with Windows nodes -- not just Windows.E.g. you can have a Linux DAS work with Windows remote instances.All existing SSH commands now have a corresponding DCOM command – except for setup-ssh which isn’t needed for DCOM.  validate-dcom is an all new command. New DCOM Commands create-node-dcom delete-node-dcom install-node-dcom list-nodes-dcom ping-node-dcom uninstall-node-dcom update-node-dcom validate-dcom setup-local-dcom (This is only available via Update Center for GlassFish 3.1.2) These commands are in-place in the trunk (4.0).  And in the branch (3.1.2) Windows Configuration Challenges There are an infinite number of possible configurations of Windows if you look at it as a combination of main release, service-pack, special drivers, software, configuration etc.  Later versions of Windows err on the side of tightening security be default.  This means that the Windows host may need to have configuration changes made.These configuration changes mostly need to be made by the user.  setup-local-dcom will assist you in making required changes to the Windows Registry.  See the reference blogs for details. The validate-dcom Command validate-dcom is a crucial command.  It should be run before any other commands.  If it does not run successfully then there is no point in running other commands.The validate-dcom command must be used from a DAS machine to test a different Windows machine.  If  validate-dcom runs successfully you can be confident that all the DCOM commands will work.  Conversely, the opposite is also true:  If validate-dcom fails, then no DCOM commands will work. What validate-dcom does Verify that the remote host is not the local machine. Resolves the remote host name Checks that the remote DCOM port is being listened on (135, 139) Checks that the remote host’s File Sharing is enabled (port 445) It copies a file (a script) to the remote host to verify that SAMBA is working and authorization is correct It runs a script that it copied on-the-fly to the remote host. Tips and Tricks The bread and butter commands that use DCOM are existing commands like create-instance, start-instance etc.   All of the commands that have dcom in their name are for dealing with the actual nodes. The way the software works is to call asadmin.bat on the remote machine and run a command.  This means that you can track these commands easily on the remote machine with the usual tools.  E.g. using AS_LOGFILE, looking at log files, etc.  It’s easy to attach a debugger to the remote asadmin process, “just in time”, if necessary. How to debug the remote commands:Edit the asadmin.bat file that is in the glassfish/bin folder.  Use glassfish/lib/nadmin.bat in GlassFish 4.0+Add these options to the java call:-Xdebug -Xrunjdwp:transport=dt_socket,server=y,suspend=y,address=1234  Now if you run, say start-instance on DAS, you can attach your debugger, at your leisure, to the remote machines port 1234.  It will be running start-local-instance and patiently waiting for you to attach.

  Read the article

• The Case of the Extra Page: Rendering Reporting Services as PDF

  - by smisner

  I had to troubleshoot a problem with a mysterious extra page appearing in a PDF this week. My first thought was that it was likely to caused by one of the most common problems that people encounter when developing reports that eventually get rendered as PDF is getting blank pages inserted into the PDF document. The cause of the blank pages is usually related to sizing. You can learn more at Understanding Pagination in Reporting Services in Books Online. When designing a report, you have to be really careful with the layout of items in the body. As you move items around, the body will expand to accommodate the space you're using and you might eventually tighten everything back up again, but the body doesn't automatically collapse. One of my favorite things to do in Reporting Services 2005 - which I dubbed the "vacu-pack" method - was to just erase the size property of the Body and let it auto-calculate the new size, squeezing out all the extra space. Alas, that method no longer works beginning with Reporting Services 2008. Even when you make sure the body size is as small as possible (with no unnecessary extra space along the top, bottom, left, or right side of the body), it's important to calculate the body size plus header plus footer plus the margins and ensure that the calculated height and width do not exceed the report's height and width (shown as the page in the illustration above). This won't matter if users always render reports online, but they'll get extra pages in a PDF document if the report's height and width are smaller than the calculate space. Beginning the Investigation In the situation that I was troubleshooting, I checked the properties: Item Property Value Body Height 6.25in   Width 10.5in Page Header Height 1in Page Footer Height 0.25in Report Left Margin 0.1in   Right Margin 0.1in   Top Margin 0.05in   Bottom Margin 0.05in   Page Size - Height 8.5in   Page Size - Width 11in So I calculated the total width using Body Width + Left Margin + Right Margin and came up with a value of 10.7 inches. And then I calculated the total height using Body Height + Page Header Height + Page Footer Height + Top Margin + Bottom Margin and got 7.6 inches. Well, page sizing couldn't be the reason for the extra page in my report because 10.7 inches is smaller than the report's width of 11 inches and 7.6 inches is smaller than the report's height of 8.5 inches. I had to look elsewhere to find the culprit. Conducting the Third Degree My next thought was to focus on the rendering size of the items in the report. I've adapted my problem to use the Adventure Works database. At the top of the report are two charts, and then below each chart is a rectangle that contains a table. In the real-life scenario, there were some graphics present as a background for the tables which fit within the rectangles that were about 3 inches high so the visual space of the rectangles matched the visual space of the charts - also about 3 inches high. But there was also a huge amount of white space at the bottom of the page, and as I mentioned at the beginning of this post, a second page which was blank except for the footer that appeared at the bottom. Placing a textbox beneath the rectangles to see if they would appear on the first page resulted the textbox's appearance on the second page. For some reason, the rectangles wanted a buffer zone beneath them. What's going on? Taking the Suspect into Custody My next step was to see what was really going on with the rectangle. The graphic appeared to be correctly sized, but the behavior in the report indicated the rectangle was growing. So I added a border to the rectangle to see what it was doing. When I added borders, I could see that the size of each rectangle was growing to accommodate the table it contains. The rectangle on the right is slightly larger than the one on the left because the table on the right contains an extra row. The rectangle is trying to preserve the whitespace that appears in the layout, as shown below. Closing the Case Now that I knew what the problem was, what could I do about it? Because of the graphic in the rectangle (not shown), I couldn't eliminate the use of the rectangles and just show the tables. But fortunately, there is a report property that comes to the rescue: ConsumeContainerWhitespace (accessible only in the Properties window). I set the value of this property to True. Problem solved. Now the rectangles remain fixed at the configured size and don't grow vertically to preserve the whitespace. Case closed.

  Read the article

• Joins in single-table queries

  - by Rob Farley

  Tables are only metadata. They don’t store data. I’ve written something about this before, but I want to take a viewpoint of this idea around the topic of joins, especially since it’s the topic for T-SQL Tuesday this month. Hosted this time by Sebastian Meine (@sqlity), who has a whole series on joins this month. Good for him – it’s a great topic. In that last post I discussed the fact that we write queries against tables, but that the engine turns it into a plan against indexes. My point wasn’t simply that a table is actually just a Clustered Index (or heap, which I consider just a special type of index), but that data access always happens against indexes – never tables – and we should be thinking about the indexes (specifically the non-clustered ones) when we write our queries. I described the scenario of looking up phone numbers, and how it never really occurs to us that there is a master list of phone numbers, because we think in terms of the useful non-clustered indexes that the phone companies provide us, but anyway – that’s not the point of this post. So a table is metadata. It stores information about the names of columns and their data types. Nullability, default values, constraints, triggers – these are all things that define the table, but the data isn’t stored in the table. The data that a table describes is stored in a heap or clustered index, but it goes further than this. All the useful data is going to live in non-clustered indexes. Remember this. It’s important. Stop thinking about tables, and start thinking about indexes. So let’s think about tables as indexes. This applies even in a world created by someone else, who doesn’t have the best indexes in mind for you. I’m sure you don’t need me to explain Covering Index bit – the fact that if you don’t have sufficient columns “included” in your index, your query plan will either have to do a Lookup, or else it’ll give up using your index and use one that does have everything it needs (even if that means scanning it). If you haven’t seen that before, drop me a line and I’ll run through it with you. Or go and read a post I did a long while ago about the maths involved in that decision. So – what I’m going to tell you is that a Lookup is a join. When I run SELECT CustomerID FROM Sales.SalesOrderHeader WHERE SalesPersonID = 285; against the AdventureWorks2012 get the following plan: I’m sure you can see the join. Don’t look in the query, it’s not there. But you should be able to see the join in the plan. It’s an Inner Join, implemented by a Nested Loop. It’s pulling data in from the Index Seek, and joining that to the results of a Key Lookup. It clearly is – the QO wouldn’t call it that if it wasn’t really one. It behaves exactly like any other Nested Loop (Inner Join) operator, pulling rows from one side and putting a request in from the other. You wouldn’t have a problem accepting it as a join if the query were slightly different, such as SELECT sod.OrderQty FROM Sales.SalesOrderHeader AS soh JOIN Sales.SalesOrderDetail as sod on sod.SalesOrderID = soh.SalesOrderID WHERE soh.SalesPersonID = 285; Amazingly similar, of course. This one is an explicit join, the first example was just as much a join, even thought you didn’t actually ask for one. You need to consider this when you’re thinking about your queries. But it gets more interesting. Consider this query: SELECT SalesOrderID FROM Sales.SalesOrderHeader WHERE SalesPersonID = 276 AND CustomerID = 29522; It doesn’t look like there’s a join here either, but look at the plan. That’s not some Lookup in action – that’s a proper Merge Join. The Query Optimizer has worked out that it can get the data it needs by looking in two separate indexes and then doing a Merge Join on the data that it gets. Both indexes used are ordered by the column that’s indexed (one on SalesPersonID, one on CustomerID), and then by the CIX key SalesOrderID. Just like when you seek in the phone book to Farley, the Farleys you have are ordered by FirstName, these seek operations return the data ordered by the next field. This order is SalesOrderID, even though you didn’t explicitly put that column in the index definition. The result is two datasets that are ordered by SalesOrderID, making them very mergeable. Another example is the simple query SELECT CustomerID FROM Sales.SalesOrderHeader WHERE SalesPersonID = 276; This one prefers a Hash Match to a standard lookup even! This isn’t just ordinary index intersection, this is something else again! Just like before, we could imagine it better with two whole tables, but we shouldn’t try to distinguish between joining two tables and joining two indexes. The Query Optimizer can see (using basic maths) that it’s worth doing these particular operations using these two less-than-ideal indexes (because of course, the best indexese would be on both columns – a composite such as (SalesPersonID, CustomerID – and it would have the SalesOrderID column as part of it as the CIX key still). You need to think like this too. Not in terms of excusing single-column indexes like the ones in AdventureWorks2012, but in terms of having a picture about how you’d like your queries to run. If you start to think about what data you need, where it’s coming from, and how it’s going to be used, then you will almost certainly write better queries. …and yes, this would include when you’re dealing with regular joins across multiples, not just against joins within single table queries.

  Read the article

• Demystified - BI in SharePoint 2010

  - by Sahil Malik

  Ad:: SharePoint 2007 Training in .NET 3.5 technologies (more information). Frequently, my clients ask me if there is a good guide on deciphering the seemingly daunting choice of products from Microsoft when it comes to business intelligence offerings in a SharePoint 2010 world. These are all described in detail in my book, but here is a one (well maybe two) page executive overview. Microsoft Excel: Yes, Microsoft Excel! Your favorite and most commonly used in the world database. No it isn’t a database in technical pure definitions, but this is the most commonly used ‘database’ in the world. You will find many business users craft up very compelling excel sheets with tonnes of logic inside them. Good for: Quick Ad-Hoc reports. Excel 64 bit allows the possibility of very large datasheets (Also see 32 bit vs 64 bit Office, and PowerPivot Add-In below). Audience: End business user can build such solutions. Related technologies: PowerPivot, Excel Services Microsoft Excel with PowerPivot Add-In: The powerpivot add-in is an extension to Excel that adds support for large-scale data. Think of this as Excel with the ability to deal with very large amounts of data. It has an in-memory data store as an option for Analysis services. Good for: Ad-hoc reporting and logic with very large amounts of data. Audience: End business user can build such solutions. Related technologies: Excel, and Excel Services Excel Services: Excel Services is a Microsoft SharePoint Server 2010 shared service that brings the power of Excel to SharePoint Server by providing server-side calculation and browser-based rendering of Excel workbooks. Thus, excel sheets can be created by end users, and published to SharePoint server – which are then rendered right through the browser in read-only or parameterized-read-only modes. They can also be accessed by other software via SOAP or REST based APIs. Good for: Sharing excel sheets with a larger number of people, while maintaining control/version control etc. Sharing logic embedded in excel sheets with other software across the organization via REST/SOAP interfaces Audience: End business users can build such solutions once your tech staff has setup excel services on a SharePoint server instance. Programmers can write software consuming functionality/complex formulae contained in your sheets. Related technologies: PerformancePoint Services, Excel, and PowerPivot. Visio Services: Visio Services is a shared service on the Microsoft SharePoint Server 2010 platform that allows users to share and view Visio diagrams that may or may not have data connected to them. Connected data can update these diagrams allowing a visual/graphical view into the data. The diagrams are viewable through the browser. They are rendered in silverlight, but will automatically down-convert to .png formats. Good for: Showing data as diagrams, live updating. Comes with a developer story. Audience: End business users can build such solutions once your tech staff has setup visio services on a SharePoint server instance. Developers can enhance the visualizations Related Technologies: Visio Services can be used to render workflow visualizations in SP2010 Reporting Services: SQL Server reporting services can integrate with SharePoint, allowing you to store reports and data sources in SharePoint document libraries, and render these reports and associated functionality such as subscriptions through a SharePoint site. In SharePoint 2010, you can also write reports against SharePoint lists (access services uses this technique). Good for: Showing complex reports running in a industry standard data store, such as SQL server. Audience: This is definitely developer land. Don’t expect end users to craft up reports, unless a report model has previously been published. Related Technologies: PerformancePoint Services PerformancePoint Services: PerformancePoint Services in SharePoint 2010 is now fully integrated with SharePoint, and comes with features that can either be used in the BI center site definition, or on their own as activated features in existing site collections. PerformancePoint services allows you to build reports and dashboards that target a variety of back-end datasources including: SQL Server reporting services, SQL Server analysis services, SharePoint lists, excel services, simple tables, etc. Using these you have the ability to create dashboards, scorecards/kpis, and simple reports. You can also create reports targeting hierarchical multidimensional data sources. The visual decomposition tree is a new report type that lets you quickly breakdown multi-dimensional data. Good for: Mostly everything :), except your wallet – it’s not free! But this is the most comprehensive offering. If you have SharePoint server, forget everything and go with performance point. Audience: Developers need to setup the back-end sources, manageability story. DBAs need to setup datawarehouses with cubes. Moderately sophisticated business users, or developers can craft up reports using dashboard designer which is a click-once App that deploys with PerformancePoint Related Technologies: Excel services, reporting services, etc.   Other relevant technologies to know about: Business Connectivity Services: Allows for consumption of external data in SharePoint as columns or external lists. This can be paired with one or more of the above BI offerings allowing insight into such data. Access Services: Allows the representation/publishing of an access database as a SharePoint 2010 site, leveraging many SharePoint features. Reporting services is used by Access services. Secure Store Service: The SP2010 Secure store service is a replacement for the SP2007 single sign on feature. This acts as a credential policeman providing credentials to various applications running with SharePoint. BCS, PerformancePoint Services, Excel Services, and many other apps use the SSS (Secure Store Service) for credential control. Comment on the article ....

  Read the article

• Dynamic Bursting ... no really!

  - by Tim Dexter

  If any of you have seen me or my colleagues present BI Publisher to you then we have hopefully mentioned 'bursting.' You may have even seen a demo where we talk about being able to take a batch of data, say invoices. Then split them by some criteria, say customer id; format them with a template; generate the output and then deliver the documents to the recipients with a click. We and especially I, always say this can be completely dynamic! By this I mean, that you could store customer preferences in a database. What layout would each customer like; what output format they would like and how they would like the document delivered. We (I) talk a good talk, but typically don't do the walk in a demo. We hard code everything in the bursting query or bursting control file to get the concept across. But no more peeps! I have finally put together a dynamic bursting demo! Its been minutes in the making but its been tough to find those minutes! Read on ... It's nothing amazing in terms of making the burst dynamic. I created a CUSTOMER_PREFS table with some simple UI in an APEX application so that I can maintain their requirements. In EBS you have descriptive flexfields that could do the same thing or probably even 'contact' fields to store most of the info. Here's my table structure: Name                           Type ------------------------------ -------- CUSTOMER_ID                    NUMBER(6) TEMPLATE_TYPE                  VARCHAR2(20) TEMPLATE_NAME                  VARCHAR2(120) OUTPUT_FORMAT                  VARCHAR2(20) DELIVERY_CHANNEL               VARCHAR2(50) EMAIL                          VARCHAR2(255) FAX                            VARCHAR2(20) ATTACH                         VARCHAR2(20) FILE_LOC                       VARCHAR2(255) Simple enough right? Just need CUSTOMER_ID as the key for the bursting engine to join it to the customer data at burst time. I have not covered the full delivery options, just email, fax and file location. Remember, its a demo people :0) However the principal is exactly the same for each delivery type. They each have a set of attributes that need to be provided and you will need to handle that in your bursting query. On a side note, in EBS, you use a bursting control file, you can apply the same principals that I'm laying out here you just need to get the customer bursting info into the XML data stream so that you can refer to it in the control file using XPATH expressions. Next, we need to look up what attributes or parameters are required for each delivery method. that can be found in the documentation here.  Now we know the combinations of parameters and delivery methods we can construct the query using a series a decode statements: select distinct cp.customer_id "KEY", cp.template_name TEMPLATE, cp.template_type TEMPLATE_FORMAT, 'en-US' LOCALE, cp.output_format OUTPUT_FORMAT, 'false' SAVE_FORMAT, cp.delivery_channel DEL_CHANNEL, decode(cp.delivery_channel,'FILE', cp.file_loc , 'EMAIL', cp.email , 'FAX', cp.fax) PARAMETER1, decode(cp.delivery_channel,'FILE', c.cust_last_name||'_orders.pdf' ,'EMAIL','[email protected]' ,'FAX', 'faxserver.com') PARAMETER2, decode(cp.delivery_channel,'FILE',NULL ,'EMAIL','[email protected]' ,'FAX', null) PARAMETER3, decode(cp.delivery_channel,'FILE',NULL ,'EMAIL','Your current orders' ,'FAX',NULL) PARAMETER4, decode(cp.delivery_channel,'FILE',NULL ,'EMAIL','Please find attached a copy of your current orders with BI Publisher, Inc' ,'FAX',NULL) PARAMETER5, decode(cp.delivery_channel,'FILE',NULL ,'EMAIL','false' ,'FAX',NULL) PARAMETER6, decode(cp.delivery_channel,'FILE',NULL ,'EMAIL','[email protected]' ,'FAX',NULL) PARAMETER7 from cust_prefs cp, customers c, orders_view ov where cp.customer_id = c.customer_id and cp.customer_id = ov.customer_id order by cp.customer_id Pretty straightforward, just need to test, test, test, the query and ensure it's bringing back the correct data based on each customers preferences. Notice the NULL values for parameters that are not relevant for a given delivery channel. You should end up with bursting control data that the bursting engine can use:  Now, your users can run the burst and documents will be formatted, generated and delivered based on the customer prefs. If you're interested in the example, I have used the sample OE schema data for the base report. The report files and CUST_PREFS table are zipped up here. The zip contains the data model (.xdmz), the report and templates (.xdoz) and the sql scripts to create and load data to the CUST_PREFS table.  Once you load the report into the catalog, you'll need to create the OE data connection and point the data model at it. You'll probably need to re-point the report to the data model too. Happy Bursting!

  Read the article

• Amanda Todd&ndash;What Parents Can Learn From Her Story

  - by D'Arcy Lussier

  Amanda Todd was a bullied teenager who committed suicide this week. Her story has become headline news due in part to her You Tube video she posted telling her story:   The story is heartbreaking for so many reasons, but I wanted to talk about what we as parents can learn from this. Being the dad to two girls, one that’s 10, I’m very aware of the dangers that the internet holds. When I saw her story, one thing jumped out at me – unmonitored internet access at an early age. My daughter (then 9) came home from a friends place once and asked if she could be in a YouTube video with her friend. Apparently this friend was allowed to do whatever she wanted on the internet, including posting goofy videos. This set off warning bells and we ensured our daughter realized the dangers and that she was not to ever post videos of herself. In looking at Amanda’s story, the access to unmonitored internet time along with just being a young girl and being flattered by an online predator were the key events that ultimately led to her suicide. Yes, the reaction of her classmates and “friends” was horrible as well, I’m not diluting that. But our youth don’t fully understand yet that what they do on the internet today will follow them potentially forever. And the people they meet online aren’t necessarily who they claim to be. So what can we as parents learn from Amanda’s story? Parents Shouldn’t Feel Bad About Being Internet Police Our job as parents is in part to protect our kids and keep them safe, even if they don’t like our measures. This includes monitoring, supervising, and restricting their internet activities. In our house we have a family computer in the living room that the kids can watch videos and surf the web. It’s in plain view of everyone, so you can’t hide what you’re looking at. If our daughter goes to a friend’s place, we ask about what they did and what they played. If the computer comes up, we ask about what they did on it. Luckily our daughter is very up front and honest in telling us things, so we have very open discussions. Parents Need to Be Honest About the Dangers of the Internet I’m sure every generation says that “kids grow up so fast these days”, but in our case the internet really does push our kids to be exposed to things they otherwise wouldn’t experience. One wrong word in a Google search, a click of a link in a spam email, or just general curiosity can expose a child to things they aren’t ready for or should never be exposed to (and I’m not just talking about adult material – have you seen some of the graphic pictures from war zones posted on news sites recently?). Our stance as parents has been to be open about discussing the dangers with our kids before they encounter any content – be proactive instead of reactionary. Part of this is alerting them to the monsters that lurk on the internet as well. As kids explore the world wide web, they’re eventually going to encounter some chat room or some Facebook friend invite or other personal connection with someone. More than ever kids need to be educated on the dangers of engaging with people online and sharing personal information. You can think of it as an evolved discussion that our parents had with us about using the phone: “Don’t say ‘I’m home alone’, don’t say when mom or dad get home, don’t tell them any information, etc.” Parents Need to Talk Self Worth at Home Katie makes the point better than I ever could (one bad word towards the end): Our children need to understand their value beyond what the latest issue of TigerBeat says, or the media who continues flaunting physical attributes over intelligence and character, or a society that puts focus on status and wealth. They also have to realize that just because someone pays you a compliment, that doesn’t mean you should ignore personal boundaries and limits. What does this have to do with the internet? Well, in days past if you wanted to be social you had to go out somewhere. Now you can video chat with any number of people from the comfort of wherever your laptop happens to be – and not just text but full HD video with sound! While innocent children head online in the hopes of meeting cool people, predators with bad intentions are heading online too. As much as we try to monitor their online activity and be honest about the dangers of the internet, the human side of our kids isn’t something we can control. But we can try to influence them to see themselves as not needing to search out the acceptance of complete strangers online. Way easier said than done, but ensuring self-worth is something discussed, encouraged, and celebrated is a step in the right direction. Parental Wake Up Call This post is not a critique of Amanda’s parents. The reality is that cyber bullying/abuse is happening every day, and there are millions of parents that have no clue its happening to their children. Amanda’s story is a wake up call that our children’s online activities may be putting them in danger. My heart goes out to the parents of this girl. As a father of daughters, I can’t imagine what I would do if I found my daughter having to hide in a ditch to avoid a mob or call 911 to report my daughter had attempted suicide by drinking bleach or deal with a child turning to drugs/alcohol/cutting to cope. It would be horrendous if we as parents didn’t re-evaluate our family internet policies in light of this event. And in the end, Amanda’s video was meant to bring attention to her plight and encourage others going through the same thing. We may not be kids, but we can still honour her memory by helping safeguard our children.

  Read the article

• How to Force Graphics Options in PC Games with NVIDIA, AMD, or Intel Graphics

  - by Chris Hoffman

  PC games usually have built-in graphics options you can change. But you’re not limited to the options built into games — the graphics control panels bundled with graphics drivers allow you to tweak options from outside PC games. For example, these tools allow you to force-enabling antialiasing to make old games look better, even if they don’t normally support it. You can also reduce graphics quality to get more performance on slow hardware. If You Don’t See These Options If you don’t have the NVIDIA Control Panel, AMD Catalyst Control Center, or Intel Graphics and Media Control Panel installed, you may need to install the appropriate graphics driver package for your hardware from the hardware manufacturer’s website. The drivers provided via Windows Update don’t include additional software like the NVIDIA Control Panel or AMD Catalyst Control Center. Drivers provided via Windows Update are also more out of date. If you’re playing PC games, you’ll want to have the latest graphics drivers installed on your system. NVIDIA Control Panel The NVIDIA Control Panel allows you to change these options if your computer has NVIDIA graphics hardware. To launch it, right-click your desktop background and select NVIDIA Control Panel. You can also find this tool by performing a Start menu (or Start screen) search for NVIDIA Control Panel or by right-clicking the NVIDIA icon in your system tray and selecting Open NVIDIA Control Panel. To quickly set a system-wide preference, you could use the Adjust image settings with preview option. For example, if you have old hardware that struggles to play the games you want to play, you may want to select “Use my preference emphasizing” and move the slider all the way to “Performance.” This trades graphics quality for an increased frame rate. By default, the “Use the advanced 3D image settings” option is selected. You can select Manage 3D settings and change advanced settings for all programs on your computer or just for specific games. NVIDIA keeps a database of the optimal settings for various games, but you’re free to tweak individual settings here. Just mouse-over an option for an explanation of what it does. If you have a laptop with NVIDIA Optimus technology — that is, both NVIDIA and Intel graphics — this is the same place you can choose which applications will use the NVIDIA hardware and which will use the Intel hardware. AMD Catalyst Control Center AMD’s Catalyst Control Center allows you to change these options on AMD graphics hardware. To open it, right-click your desktop background and select Catalyst Control Center. You can also right-click the Catalyst icon in your system tray and select Catalyst Control Center or perform a Start menu (or Start screen) search for Catalyst Control Center. Click the Gaming category at the left side of the Catalyst Control Center window and select 3D Application Settings to access the graphics settings you can change. The System Settings tab allows you to configure these options globally, for all games. Mouse over any option to see an explanation of what it does. You can also set per-application 3D settings and tweak your settings on a per-game basis. Click the Add option and browse to a game’s .exe file to change its options. Intel Graphics and Media Control Panel Intel integrated graphics is nowhere near as powerful as dedicated graphics hardware from NVIDIA and AMD, but it’s improving and comes included with most computers. Intel doesn’t provide anywhere near as many options in its graphics control panel, but you can still tweak some common settings. To open the Intel graphics control panel, locate the Intel graphics icon in your system tray, right-click it, and select Graphics Properties. You can also right-click the desktop and select Graphics Properties. Select either Basic Mode or Advanced Mode. When the Intel Graphics and Media Control Panel appears, select the 3D option. You’ll be able to set your Performance or Quality setting by moving the slider around or click the Custom Settings check box and customize your Anisotropic Filtering and Vertical Sync preference. Different Intel graphics hardware may have different options here. We also wouldn’t be surprised to see more advanced options appear in the future if Intel is serious about competing in the PC graphics market, as they say they are. These options are primarily useful to PC gamers, so don’t worry about them — or bother downloading updated graphics drivers — if you’re not a PC gamer and don’t use any intensive 3D applications on your computer. Image Credit: Dave Dugdale on Flickr     

  Read the article

• Visual Studio Little Wonders: Box Selection

  - by James Michael Hare

  So this week I decided I’d do a Little Wonder of a different kind and focus on an underused IDE improvement: Visual Studio’s Box Selection capability. This is a handy feature that many people still don’t realize was made available in Visual Studio 2010 (and beyond).  True, there have been other editors in the past with this capability, but now that it’s fully part of Visual Studio we can enjoy it’s goodness from within our own IDE. So, for those of you who don’t know what box selection is and what it allows you to do, read on! Sometimes, we want to select beyond the horizontal… The problem with traditional text selection in many editors is that it is horizontally oriented.  Sure, you can select multiple rows, but if you do you will pull in the entire row (at least for the middle rows).  Under the old selection scheme, if you wanted to select a portion of text from each row (a “box” of text) you were out of luck.  Box selection rectifies this by allowing you to select a box of text that bounded by a selection rectangle that you can grow horizontally or vertically.  So let’s think a situation that could occur where this comes in handy. Let’s say, for instance, that we are defining an enum in our code that we want to be able to translate into some string values (possibly to be stored in a database, output to screen, etc.). Perhaps such an enum would look like this: 1: public enum OrderType 2: { 3: Buy, // buy shares of a commodity 4: Sell, // sell shares of a commodity 5: Exchange, // exchange one commodity for another 6: Cancel, // cancel an order for a commodity 7: } 8:  Now, let’s say we are in the process of creating a Dictionary<K,V> to translate our OrderType: 1: var translator = new Dictionary<OrderType, string> 2: { 3: // do I really want to retype all this??? 4: }; Yes the example above is contrived so that we will pull some garbage if we do a multi-line select. I could select the lines above using the traditional multi-line selection: And then paste them into the translator code, which would result in this: 1: var translator = new Dictionary<OrderType, string> 2: { 3: Buy, // buy shares of a commodity 4: Sell, // sell shares of a commodity 5: Exchange, // exchange one commodity for another 6: Cancel, // cancel an order for a commodity 7: }; But I have a lot of junk there, sure I can manually clear it out, or use some search and replace magic, but if this were hundreds of lines instead of just a few that would quickly become cumbersome. The Box Selection Now that we have the ability to create box selections, we can select the box of text to delete!  Most of us are familiar with the fact we can drag the mouse (or hold [Shift] and use the arrow keys) to create a selection that can span multiple rows: Box selection, however, actually allows us to select a box instead of the typical horizontal lines: Then we can press the [delete] key and the pesky comments are all gone! You can do this either by holding down [Alt] while you select with your mouse, or by holding down [Alt+Shift] and using the arrow keys on the keyboard to grow the box horizontally or vertically. So now we have: 1: var translator = new Dictionary<OrderType, string> 2: { 3: Buy, 4: Sell, 5: Exchange, 6: Cancel, 7: }; Which is closer, but we still need an opening curly, the string to translate to, and the closing curly and comma. Fortunately, again, this is easy with box selections due to the fact box selection can even work for a zero-width selection! That is, hold down [Alt] and either drag down with no width, or hold down [Alt+Shift] and arrow down and you will define a selection range with no width, essentially, a vertical line selection: Notice the faint selection line on the right? So why is this useful? Well, just like with any selected range, we can type and it will replace the selection. What does this mean for box selections? It means that we can insert the same text all the way down on each line! If we have the same selection above, and type a curly and a space, we’d get: Imagine doing this over hundreds of lines and think of what a time saver it could be! Now make a zero-width selection on the other side: And type a curly and a comma, and we’d get: So close! Now finally, imagine we’ve already defined these strings somewhere and want to paste them in: 1: const private string BuyText = "Buy Shares"; 2: const private string SellText = "Sell Shares"; 3: const private string ExchangeText = "Exchange"; 4: const private string CancelText = "Cancel"; We can, again, use our box selection to pull out the constant names: And clicking copy (or [CTRL+C]) and then selecting a range to paste into: And finally clicking paste (or [CTRL+V]) to get the final result: 1: var translator = new Dictionary<OrderType, string> 2: { 3: { Buy, BuyText }, 4: { Sell, SellText }, 5: { Exchange, ExchangeText }, 6: { Cancel, CancelText }, 7: };   Sure, this was a contrived example, but I’m sure you’ll agree that it adds myriad possibilities of new ways to copy and paste vertical selections, as well as inserting text across a vertical slice. Summary: While box selection has been around in other editors, we finally get to experience it in VS2010 and beyond. It is extremely handy for selecting columns of information for cutting, copying, and pasting. In addition, it allows you to create a zero-width vertical insertion point that can be used to enter the same text across multiple rows. Imagine the time you can save adding repetitive code across multiple lines!  Try it, the more you use it, the more you’ll love it! Technorati Tags: C#,CSharp,.NET,Visual Studio,Little Wonders,Box Selection

  Read the article

• Calculated Columns in Entity Framework Code First Migrations

  - by David Paquette

  I had a couple people ask me about calculated properties / columns in Entity Framework this week.  The question was, is there a way to specify a property in my C# class that is the result of some calculation involving 2 properties of the same class.  For example, in my database, I store a FirstName and a LastName column and I would like a FullName property that is computed from the FirstName and LastName columns.  My initial answer was: 1: public string FullName 2: { 3: get { return string.Format("{0} {1}", FirstName, LastName); } 4: } Of course, this works fine, but this does not give us the ability to write queries using the FullName property.  For example, this query: 1: var users = context.Users.Where(u => u.FullName.Contains("anan")); Would result in the following NotSupportedException: The specified type member 'FullName' is not supported in LINQ to Entities. Only initializers, entity members, and entity navigation properties are supported. It turns out there is a way to support this type of behavior with Entity Framework Code First Migrations by making use of Computed Columns in SQL Server.  While there is no native support for computed columns in Code First Migrations, we can manually configure our migration to use computed columns. Let’s start by defining our C# classes and DbContext: 1: public class UserProfile 2: { 3: public int Id { get; set; } 4: 5: public string FirstName { get; set; } 6: public string LastName { get; set; } 7: 8: [DatabaseGenerated(DatabaseGeneratedOption.Computed)] 9: public string FullName { get; private set; } 10: } 11: 12: public class UserContext : DbContext 13: { 14: public DbSet<UserProfile> Users { get; set; } 15: } The DatabaseGenerated attribute is needed on our FullName property.  This is a hint to let Entity Framework Code First know that the database will be computing this property for us. Next, we need to run 2 commands in the Package Manager Console.  First, run Enable-Migrations to enable Code First Migrations for the UserContext.  Next, run Add-Migration Initial to create an initial migration.  This will create a migration that creates the UserProfile table with 3 columns: FirstName, LastName, and FullName.  This is where we need to make a small change.  Instead of allowing Code First Migrations to create the FullName property, we will manually add that column as a computed column. 1: public partial class Initial : DbMigration 2: { 3: public override void Up() 4: { 5: CreateTable( 6: "dbo.UserProfiles", 7: c => new 8: { 9: Id = c.Int(nullable: false, identity: true), 10: FirstName = c.String(), 11: LastName = c.String(), 12: //FullName = c.String(), 13: }) 14: .PrimaryKey(t => t.Id); 15: Sql("ALTER TABLE dbo.UserProfiles ADD FullName AS FirstName + ' ' + LastName"); 16: } 17: 18: 19: public override void Down() 20: { 21: DropTable("dbo.UserProfiles"); 22: } 23: } Finally, run the Update-Database command.  Now we can query for Users using the FullName property and that query will be executed on the database server.  However, we encounter another potential problem. Since the FullName property is calculated by the database, it will get out of sync on the object side as soon as we make a change to the FirstName or LastName property.  Luckily, we can have the best of both worlds here by also adding the calculation back to the getter on the FullName property: 1: [DatabaseGenerated(DatabaseGeneratedOption.Computed)] 2: public string FullName 3: { 4: get { return FirstName + " " + LastName; } 5: private set 6: { 7: //Just need this here to trick EF 8: } 9: } Now we can both query for Users using the FullName property and we also won’t need to worry about the FullName property being out of sync with the FirstName and LastName properties.  When we run this code: 1: using(UserContext context = new UserContext()) 2: { 3: UserProfile userProfile = new UserProfile {FirstName = "Chanandler", LastName = "Bong"}; 4: 5: Console.WriteLine("Before saving: " + userProfile.FullName); 6: 7: context.Users.Add(userProfile); 8: context.SaveChanges(); 9:  10: Console.WriteLine("After saving: " + userProfile.FullName); 11:  12: UserProfile chanandler = context.Users.First(u => u.FullName == "Chanandler Bong"); 13: Console.WriteLine("After reading: " + chanandler.FullName); 14:  15: chanandler.FirstName = "Chandler"; 16: chanandler.LastName = "Bing"; 17:  18: Console.WriteLine("After changing: " + chanandler.FullName); 19:  20: } We get this output: It took a bit of work, but finally Chandler’s TV Guide can be delivered to the right person. The obvious downside to this implementation is that the FullName calculation is duplicated in the database and in the UserProfile class. This sample was written using Visual Studio 2012 and Entity Framework 5. Download the source code here.

  Read the article

• Using SQL Source Control with Fortress or Vault &ndash; Part 1

  - by AjarnMark

  I am fanatical when it comes to managing the source code for my company.  Everything that we build (in source form) gets put into our source control management system.  And I’m not just talking about the UI and middle-tier code written in C# and ASP.NET, but also the back-end database stuff, which at times has been a pain.  We even script out our Scheduled Jobs and keep a copy of those under source control. The UI and middle-tier stuff has long been easy to manage as we mostly use Visual Studio which has integration with source control systems built in.  But the SQL code has been a little harder to deal with.  I have been doing this for many years, well before Microsoft came up with Data Dude, so I had already established a methodology that, while not as smooth as VS, nonetheless let me keep things well controlled, and allowed doing my database development in my tool of choice, Query Analyzer in days gone by, and now SQL Server Management Studio.  It just makes sense to me that if I’m going to do database development, let’s use the database tool set.  (Although, I have to admit I was pretty impressed with the demo of Juneau that Don Box did at the PASS Summit this year.)  So as I was saying, I had developed a methodology that worked well for us (and I’ll probably outline in a future post) but it could use some improvement. When Solutions and Projects were first introduced in SQL Management Studio, I thought we were finally going to get our same experience that we have in Visual Studio.  Well, let’s say I was underwhelmed by Version 1 in SQL 2005, and apparently so were enough other people that by the time SQL 2008 came out, Microsoft decided that Solutions and Projects would be deprecated and completely removed from a future version.  So much for that idea. Then I came across SQL Source Control from Red-Gate.  I have used several tools from Red-Gate in the past, including my favorites SQL Compare, SQL Prompt, and SQL Refactor.  SQL Prompt is worth its weight in gold, and the others are great, too.  Earlier this year, we upgraded from our earlier product bundles to the new Developer Bundle, and in the process added SQL Source Control to our collection.  I thought this might really be the golden ticket I was looking for.  But my hopes were quickly dashed when I discovered that it only integrated with Microsoft Team Foundation Server and Subversion as the source code repositories.  We have been using SourceGear’s Vault and Fortress products for years, and I wholeheartedly endorse them.  So I was out of luck for the time being, although there were a number of people voting for Vault/Fortress support on their feedback forum (as did I) so I had hope that maybe next year I could look at it again. But just a couple of weeks ago, I was pleasantly surprised to receive notice in my email that Red-Gate had an Early Access version of SQL Source Control that worked with Vault and Fortress, so I quickly downloaded it and have been putting it through its paces.  So far, I really like what I see, and I have been quite impressed with Red-Gate’s responsiveness when I have contacted them with any issues or concerns that I have had.  I have had several communications with Gyorgy Pocsi at Red-Gate and he has been immensely helpful and responsive. I must say that development with SQL Source Control is very different from what I have been used to.  This post is getting long enough, so I’ll save some of the details for a separate write-up, but the short story is that in my regular mode, it’s all about the script files.  Script files are King and you dare not make a change to the database other than by way of a script file, or you are in deep trouble.  With SQL Source Control, you make your changes to your development database however you like.  I still prefer writing most of my changes in T-SQL, but you can also use any of the GUI functionality of SSMS to make your changes, and SQL Source Control “manages” the script for you.  Basically, when you first link your database to source control, the tool generates scripts for every primary object (tables and their indexes are together in one script, not broken out into separate scripts like DB Projects do) and those scripts are checked into your source control.  So, if you needed to, you could still do a GET from your source control repository and build the database from scratch.  But for the day-to-day work, SQL Source Control uses the same technique as SQL Compare to determine what changes have been made to your development database and how to represent those in your repository scripts.  I think that once I retrain myself to just work in the database and quit worrying about having to find and open the right script file, that this will actually make us more efficient. And for deployment purposes, SQL Source Control integrates with the full SQL Compare utility to produce a synchronization script (or do a live sync).  This is similar in concept to Microsoft’s DACPAC, if you’re familiar with that. If you are not currently keeping your database development efforts under source control, definitely examine this tool.  If you already have a methodology that is working for you, then I still think this is worth a review and comparison to your current approach.  You may find it more efficient.  But remember that the version which integrates with Vault/Fortress is still in pre-release mode, so treat it with a little caution.  I have found it to be fairly stable, but there was one bug that I found which had inconvenient side-effects and could have really been frustrating if I had been running this on my normal active development machine.  However, I can verify that that bug has been fixed in a more recent build version (did I mention Red-Gate’s responsiveness?).

  Read the article

• The Unspoken - The Why of GC Ergonomics

  - by jonthecollector

  Do you use GC ergonomics, -XX:+UseAdaptiveSizePolicy, with the UseParallelGC collector? The jist of GC ergonomics for that collector is that it tries to grow or shrink the heap to meet a specified goal. The goals that you can choose are maximum pause time and/or throughput. Don't get too excited there. I'm speaking about UseParallelGC (the throughput collector) so there are definite limits to what pause goals can be achieved. When you say out loud "I don't care about pause times, give me the best throughput I can get" and then say to yourself "Well, maybe 10 seconds really is too long", then think about a pause time goal. By default there is no pause time goal and the throughput goal is high (98% of the time doing application work and 2% of the time doing GC work). You can get more details on this in my very first blog. GC ergonomics The UseG1GC has its own version of GC ergonomics, but I'll be talking only about the UseParallelGC version. If you use this option and wanted to know what it (GC ergonomics) was thinking, try -XX:AdaptiveSizePolicyOutputInterval=1 This will print out information every i-th GC (above i is 1) about what the GC ergonomics to trying to do. For example, UseAdaptiveSizePolicy actions to meet *** throughput goal *** GC overhead (%) Young generation: 16.10 (attempted to grow) Tenured generation: 4.67 (attempted to grow) Tenuring threshold: (attempted to decrease to balance GC costs) = 1 GC ergonomics tries to meet (in order) Pause time goal Throughput goal Minimum footprint The first line says that it's trying to meet the throughput goal. UseAdaptiveSizePolicy actions to meet *** throughput goal *** This run has the default pause time goal (i.e., no pause time goal) so it is trying to reach a 98% throughput. The lines Young generation: 16.10 (attempted to grow) Tenured generation: 4.67 (attempted to grow) say that we're currently spending about 16% of the time doing young GC's and about 5% of the time doing full GC's. These percentages are a decaying, weighted average (earlier contributions to the average are given less weight). The source code is available as part of the OpenJDK so you can take a look at it if you want the exact definition. GC ergonomics is trying to increase the throughput by growing the heap (so says the "attempted to grow"). The last line Tenuring threshold: (attempted to decrease to balance GC costs) = 1 says that the ergonomics is trying to balance the GC times between young GC's and full GC's by decreasing the tenuring threshold. During a young collection the younger objects are copied to the survivor spaces while the older objects are copied to the tenured generation. Younger and older are defined by the tenuring threshold. If the tenuring threshold hold is 4, an object that has survived fewer than 4 young collections (and has remained in the young generation by being copied to the part of the young generation called a survivor space) it is younger and copied again to a survivor space. If it has survived 4 or more young collections, it is older and gets copied to the tenured generation. A lower tenuring threshold moves objects more eagerly to the tenured generation and, conversely a higher tenuring threshold keeps copying objects between survivor spaces longer. The tenuring threshold varies dynamically with the UseParallelGC collector. That is different than our other collectors which have a static tenuring threshold. GC ergonomics tries to balance the amount of work done by the young GC's and the full GC's by varying the tenuring threshold. Want more work done in the young GC's? Keep objects longer in the survivor spaces by increasing the tenuring threshold. This is an example of the output when GC ergonomics is trying to achieve a pause time goal UseAdaptiveSizePolicy actions to meet *** pause time goal *** GC overhead (%) Young generation: 20.74 (no change) Tenured generation: 31.70 (attempted to shrink) The pause goal was set at 50 millisecs and the last GC was 0.415: [Full GC (Ergonomics) [PSYoungGen: 2048K-0K(26624K)] [ParOldGen: 26095K-9711K(28992K)] 28143K-9711K(55616K), [Metaspace: 1719K-1719K(2473K/6528K)], 0.0758940 secs] [Times: user=0.28 sys=0.00, real=0.08 secs] The full collection took about 76 millisecs so GC ergonomics wants to shrink the tenured generation to reduce that pause time. The previous young GC was 0.346: [GC (Allocation Failure) [PSYoungGen: 26624K-2048K(26624K)] 40547K-22223K(56768K), 0.0136501 secs] [Times: user=0.06 sys=0.00, real=0.02 secs] so the pause time there was about 14 millisecs so no changes are needed. If trying to meet a pause time goal, the generations are typically shrunk. With a pause time goal in play, watch the GC overhead numbers and you will usually see the cost of setting a pause time goal (i.e., throughput goes down). If the pause goal is too low, you won't achieve your pause time goal and you will spend all your time doing GC. GC ergonomics is meant to be simple because it is meant to be used by anyone. It was not meant to be mysterious and so this output was added. If you don't like what GC ergonomics is doing, you can turn it off with -XX:-UseAdaptiveSizePolicy, but be pre-warned that you have to manage the size of the generations explicitly. If UseAdaptiveSizePolicy is turned off, the heap does not grow. The size of the heap (and the generations) at the start of execution is always the size of the heap. I don't like that and tried to fix it once (with some help from an OpenJDK contributor) but it unfortunately never made it out the door. I still have hope though. Just a side note. With the default throughput goal of 98% the heap often grows to it's maximum value and stays there. Definitely reduce the throughput goal if footprint is important. Start with -XX:GCTimeRatio=4 for a more modest throughput goal (%20 of the time spent in GC). A higher value means a smaller amount of time in GC (as the throughput goal).

  Read the article

• Fun With the Chrome JavaScript Console and the Pluralsight Website

  - by Steve Michelotti

  Originally posted on: http://geekswithblogs.net/michelotti/archive/2013/07/24/fun-with-the-chrome-javascript-console-and-the-pluralsight-website.aspxI’m currently working on my third course for Pluralsight. Everyone already knows that Scott Allen is a “dominating force” for Pluralsight but I was curious how many courses other authors have published as well. The Pluralsight Authors page - http://pluralsight.com/training/Authors – shows all 146 authors and you can click on any author’s page to see how many (and which) courses they have authored. The problem is: I don’t want to have to click into 146 pages to get a count for each author. With this in mind, I figured I could write a little JavaScript using the Chrome JavaScript console to do some “detective work.” My first step was to figure out how the HTML was structured on this page so I could do some screen-scraping. Right-click the first author - “Inspect Element”. I can see there is a primary <div> with a class of “main” which contains all the authors. Each author is in an <h3> with an <a> tag containing their name and link to their page:     This web page already has jQuery loaded so I can use $ directly from the console. This allows me to just use jQuery to inspect items on the current page. Notice this is a multi-line command. In order to use multiple lines in the console you have to press SHIFT-ENTER to go to the next line:     Now I can see I’m extracting data just fine. At this point I want to follow each URL. Then I want to screen-scrape this next page to see how many courses each author has done. Let’s take a look at the author detail page:       I can see we have a table (with a css class of “course”) that contains rows for each course authored. This means I can get the number of courses pretty easily like this:     Now I can put this all together. Back on the authors page, I want to follow each URL, extract the returned HTML, and grab the count. In the code below, I simply use the jQuery $.get() method to get the author detail page and the “data” variable that is in the callback contains the HTML. A nice feature of jQuery is that I can simply put this HTML string inside of $() and I can use jQuery selectors directly on it in conjunction with the find() method:     Now I’m getting somewhere. I have every Pluralsight author and how many courses each one has authored. But that’s not quite what I’m after – what I want to see are the authors that have the MOST courses in the library. What I’d like to do is to put all of the data in an array and then sort that array descending by number of courses. I can add an item to the array after each author detail page is returned but the catch here is that I can’t perform the sort operation until ALL of the author detail pages have executed. The jQuery $.get() method is naturally an async method so I essentially have 146 async calls and I don’t want to perform my sort action until ALL have completed (side note: don’t run this script too many times or the Pluralsight servers might think your an evil hacker attempting a DoS attack and deny you). My C# brain wants to use a WaitHandle WaitAll() method here but this is JavaScript. I was able to do this by using the jQuery Deferred() object. I create a new deferred object for each request and push it onto a deferred array. After each request is complete, I signal completion by calling the resolve() method. Finally, I use a $.when.apply() method to execute my descending sort operation once all requests are complete. Here is my complete console command: 1: var authorList = [], 2: defList = []; 3: $(".main h3 a").each(function() { 4: var def = $.Deferred(); 5: defList.push(def); 6: var authorName = $(this).text(); 7: var authorUrl = $(this).attr('href'); 8: $.get(authorUrl, function(data) { 9: var courseCount = $(data).find("table.course tbody tr").length; 10: authorList.push({ name: authorName, numberOfCourses: courseCount }); 11: def.resolve(); 12: }); 13: }); 14: $.when.apply($, defList).then(function() { 15: console.log("*Everything* is complete"); 16: var sortedList = authorList.sort(function(obj1, obj2) { 17: return obj2.numberOfCourses - obj1.numberOfCourses; 18: }); 19: for (var i = 0; i < sortedList.length; i++) { 20: console.log(authorList[i]); 21: } 22: });   And here are the results:     WOW! John Sonmez has 44 courses!! And Matt Milner has 29! I guess Scott Allen isn’t the only “dominating force”. I would have assumed Scott Allen was #1 but he comes in as #3 in total course count (of course Scott has 11 courses in the Top 50, and 14 in the Top 100 which is incredible!). Given that I’m in the middle of producing only my third course, I better get to work!

  Read the article

• Online Password Security Tactics

  - by BuckWoody

  Recently two more large databases were attacked and compromised, one at the popular Gawker Media sites and the other at McDonald’s. Every time this kind of thing happens (which is FAR too often) it should remind the technical professional to ensure that they secure their systems correctly. If you write software that stores passwords, it should be heavily encrypted, and not human-readable in any storage. I advocate a different store for the login and password, so that if one is compromised, the other is not. I also advocate that you set a bit flag when a user changes their password, and send out a reminder to change passwords if that bit isn’t changed every three or six months.    But this post is about the *other* side – what to do to secure your own passwords, especially those you use online, either in a cloud service or at a provider. While you’re not in control of these breaches, there are some things you can do to help protect yourself. Most of these are obvious, but they contain a few little twists that make the process easier.   Use Complex Passwords This is easily stated, and probably one of the most un-heeded piece of advice. There are three main concepts here: ·         Don’t use a dictionary-based word ·         Use mixed case ·         Use punctuation, special characters and so on   So this: password Isn’t nearly as safe as this: P@ssw03d   Of course, this only helps if the site that stores your password encrypts it. Gawker does, so theoretically if you had the second password you’re in better shape, at least, than the first. Dictionary words are quickly broken, regardless of the encryption, so the more unusual characters you use, and the farther away from the dictionary words you get, the better.   Of course, this doesn’t help, not even a little, if the site stores the passwords in clear text, or the key to their encryption is broken. In that case…   Use a Different Password at Every Site What? I have hundreds of sites! Are you kidding me? Nope – I’m not. If you use the same password at every site, when a site gets attacked, the attacker will store your name and password value for attacks at other sites. So the only safe thing to do is to use different names or passwords (or both) at each site. Of course, most sites use your e-mail as a username, so you’re kind of hosed there. So even though you have hundreds of sites you visit, you need to have at least a different password at each site.   But it’s easier than you think – if you use an algorithm.   What I’m describing is to pick a “root” password, and then modify that based on the site or purpose. That way, if the site is compromised, you can still use that root password for the other sites.   Let’s take that second password: P@ssw03d   And now you can append, prepend or intersperse that password with other characters to make it unique to the site. That way you can easily remember the root password, but make it unique to the site. For instance, perhaps you read a lot of information on Gawker – how about these:   P@ssw03dRead ReadP@ssw03d PR@esasdw03d   If you have lots of sites, tracking even this can be difficult, so I recommend you use password software such as Password Safe or some other tool to have a secure database of your passwords at each site. DO NOT store this on the web. DO NOT use an Office document (Microsoft or otherwise) that is “encrypted” – the encryption office automation packages use is very trivial, and easily broken. A quick web search for tools to do that should show you how bad a choice this is.   Change Your Password on a Schedule I know. It’s a real pain. And it doesn’t seem worth it…until your account gets hacked. A quick note here – whenever a site gets hacked (and I find out about it) I change the password at that site immediately (or quit doing business with them) and then change the root password on every site, as quickly as I can.   If you follow the tip above, it’s not as hard. Just add another number, year, month, day, something like that into the mix. It’s not unlike making a Primary Key in an RDBMS.   P@ssw03dRead10242010   Change the site, and then update your password database. I do this about once a month, on the first or last day, during staff meetings. (J)   If you have other tips, post them here. We can all learn from each other on this.

  Read the article

• Bring Office 2003 Menus Back to 2010 with UBitMenu

  - by Matthew Guay

  Are you having trouble getting used to the Ribbon interface in Office 2010?  Here’s how you can roll back the clock a bit and bring back the familiar menus and toolbars from 2003. The Office 2007 Ribbon was both praised and criticized.  While many users felt they were more productive with the new interface, others felt frustrated searching for commands they had memorized in older versions of Office.  Now, with Office 2010, the ribbon interface has been brought to every app in the Office suite, and is integrated into many newer programs from Microsoft. If you’re moving from Office 2003, using UBitMenu allows you to add the old familiar menus back along with the new Ribbon interface for an easier learning curve. Also, with the customizability of Office 2010, we can strip away the extra Ribbon tabs to make it more like 2003. Get the 2003 Menus and Toolbars Back in Office 2010 Download UBitMenu (link below), and install as normal.  Make sure all of your Office programs are closed during the installation.  This handy utility is very small, and installed amazingly quick. Open Word, Excel, or PowerPoint and there’s now a new Menu tab beside Home in the Ribbon.  Now you can access all of your favorite old Office commands in the familiar menus, and access many of the newer Office features such as SmartArt.   Here’s a close-up of the toolbar.  Notice that the layout is very similar to that of Word 2003. You can access all of the new Transitions in PowerPoint 2010 from the menu bar.   The menu in Excel even included support for the new PivotTable and PivotCharts Wizard. One problem we noticed was that the toolbars were condensed to a drop-down menu if the Office window was less than 870px wide.  This may be a frustration to users with low-resolution displays, and you might want to use the Office Apps maximized. Get Rid of the Ribbon Now that you’ve got the old menus back, you can get rid of the extra ribbon tabs if you’d like.  Office 2010 lets you customize your ribbon and remove tabs, so let’s get rid of all the other tabs except for our new Menu tab.  In our example we’re using Word, but you can do it in Excel or PowerPoint the same way. Click the File tab and select Options. Alternately, in the Menu tab, select Tools and then Word Options. Select Customize Ribbon on the left sidebar, then uncheck the boxes beside all the ribbon tabs you want to hide on the right.  Click Ok when you’re finished. While you’re at it, you can change the default color scheme as well. Note: The color change will automatically change the color scheme in all of the Office apps, so you’ll only need to do that once. Now the ribbon only has 2 tabs…the File tab for the new Backstage View, and the UBitMenu tab we just installed.  It almost has the appearance Word 2003, but with the new features of Word 2010!  You’ll need to repeat these steps in Excel and PowerPoint if you want to customize their ribbon the same.   Conclusion If you’ve been having a hard time getting used to Office 2010, UBitMenu is a great way to get familiar with the new interface, or simply stay productive with your old tricks.  We do wish it supported the other Office applications like OneNote and Outlook. That doesn’t make it a deal breaker though, it can make the learning curve easier in Word, PowerPoint, and Excel. UBitMenu is free for personal use, and available at a very reasonable price for businesses. If you’re using Office 2007 and not a fan of the Ribbon, UBitMenu works for it as well. Download UBitMenu Similar Articles Productive Geek Tips How To Bring Back the Old Menus in Office 2007Upgrade Office 2003 to 2010 on XP or Run them Side by SideHow to Find Office 2003 Commands in Office 2010Make Word 2007 Always Save in Word 2003 FormatMake Excel 2007 Always Save in Excel 2003 Format TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Speed Up Windows With ReadyBoost Awesome World Cup Soccer Calendar Nice Websites To Watch TV Shows Online 24 Million Sites Windows Media Player Glass Icons (icons we like) How to Forecast Weather, without Gadgets

  Read the article

• Execute TSQL statement with ExecuteStoreQuery in entity framework 4.0

  - by Jalpesh P. Vadgama

  I was playing with entity framework in recent days and I was searching something that how we can execute TSQL statement in entity framework. And I have found one great way to do that with entity framework ‘ExecuteStoreQuery’ method. It’s executes a TSQL statement against data source given enity framework context and returns strongly typed result. You can find more information about ExcuteStoreQuery from following link. http://msdn.microsoft.com/en-us/library/dd487208.aspx So let’s examine how it works. So Let’s first create a table against which we are going to execute TSQL statement. So I have added a SQL Express database as following. Now once we are done with adding a database let’s add a table called Client like following. Here you can see above Client table is very simple. There are only two fields ClientId and ClientName where ClientId is primary key and ClientName is field where we are going to store client name. Now it’s time to add some data to the table. So I have added some test data like following. Now it’s time to add entity framework model class. So right click project->Add new item and select ADO.NET entity model as following. After clicking on add button a wizard will start it will ask whether we need to create model classes from database or not but we already have our client table ready so I have selected generate from database as following. Once you process further in wizard it will be presented a screen where we can select the our table like following. Now once you click finish it will create model classes with for us. Now we need a gridview control where we need to display those data. So in Default.aspx page I have added a grid control like following. <%@ Page Title="Home Page" Language="C#" MasterPageFile="~/Site.master" AutoEventWireup="true" CodeBehind="Default.aspx.cs" Inherits="EntityFramework._Default" %> <asp:Content ID="HeaderContent" runat="server" ContentPlaceHolderID="HeadContent"> </asp:Content> <asp:Content ID="BodyContent" runat="server" ContentPlaceHolderID="MainContent"> <h2> Welcome to ASP.NET! </h2> <p> To learn more about ASP.NET visit <a href="http://www.asp.net" title="ASP.NET Website">www.asp.net</a>. </p> <p> You can also find <a href="http://go.microsoft.com/fwlink/?LinkID=152368&amp;clcid=0x409" title="MSDN ASP.NET Docs">documentation on ASP.NET at MSDN</a>. <asp:GridView ID="grdClient" runat="server"> </asp:GridView> </p> </asp:Content> Now once we are done with adding Gridview its time to write code for server side. So I have written following code in Page_load event of default.aspx page. protected void Page_Load(object sender, EventArgs e) { if (!Page.IsPostBack) { using (var context = new EntityFramework.TestEntities()) { ObjectResult<Client> result = context.ExecuteStoreQuery<Client>("Select * from Client"); grdClient.DataSource = result; grdClient.DataBind(); } } } Here in the above code you can see that I have written create a object of our entity model and then with the help of the ExecuteStoreQuery method I have execute a simple select TSQL statement which will return a object result. I have bind that object result with gridview to display data. So now we are done with coding.So let’s run application in browser. Following is output as expected. That’s it. Hope you like it. Stay tuned for more..Till then happy programming.

  Read the article

• using isight camera in macbookpro(8,2) on ubuntu 12.04 virtualbox VM

  - by Kurt Spindler

  I'm having a lot of trouble using the built-in isight camera on my macbookpro8,2 (early 2011) from an ubuntu 12.04 virtual machine, run inside VirtualBox. The following is the log I get when I try to run guvcview ubuntu@ubuntu:~$ guvcview guvcview 1.5.3 ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.rear ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.center_lfe ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.side ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.surround71 ALSA lib setup.c:565:(add_elem) Cannot obtain info for CTL elem (MIXER,'IEC958 Playback Default',0,0,0): No such file or directory ALSA lib setup.c:565:(add_elem) Cannot obtain info for CTL elem (MIXER,'IEC958 Playback Default',0,0,0): No such file or directory ALSA lib setup.c:565:(add_elem) Cannot obtain info for CTL elem (MIXER,'IEC958 Playback Default',0,0,0): No such file or directory ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.hdmi ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.hdmi ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.modem ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.modem ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.phoneline ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.phoneline ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib pcm_dmix.c:957:(snd_pcm_dmix_open) The dmix plugin supports only playback stream Cannot connect to server socket err = No such file or directory Cannot connect to server socket jack server is not running or cannot be started video device: /dev/video0 Init. FaceTime HD Camera (Built-in) (location: usb-0000:00:0b.0-1) { pixelformat = 'YUYV', description = 'YUV 4:2:2 (YUYV)' } { discrete: width = 160, height = 120 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 176, height = 144 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 320, height = 240 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 352, height = 288 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 640, height = 480 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1280, height = 720 } Time interval between frame: 1/10, { pixelformat = 'MJPG', description = 'MJPEG' } { discrete: width = 960, height = 540 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1024, height = 576 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1280, height = 720 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { pixelformat = 'RGB3', description = 'RGB3' } { discrete: width = 160, height = 120 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 176, height = 144 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 320, height = 240 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 352, height = 288 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 640, height = 480 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1280, height = 720 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 960, height = 540 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1024, height = 576 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { pixelformat = 'BGR3', description = 'BGR3' } { discrete: width = 160, height = 120 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 176, height = 144 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 320, height = 240 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 352, height = 288 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 640, height = 480 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1280, height = 720 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 960, height = 540 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1024, height = 576 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { pixelformat = 'YU12', description = 'YU12' } { discrete: width = 160, height = 120 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 176, height = 144 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 320, height = 240 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 352, height = 288 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 640, height = 480 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1280, height = 720 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 960, height = 540 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1024, height = 576 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { pixelformat = 'YV12', description = 'YV12' } { discrete: width = 160, height = 120 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 176, height = 144 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 320, height = 240 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 352, height = 288 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 640, height = 480 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1280, height = 720 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 960, height = 540 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1024, height = 576 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, vid:05ac pid:8509 driver:uvcvideo checking format: 1196444237 VIDIOC_G_COMP:: Invalid argument compression control not supported fps is set to 1/25 drawing controls no codec detected for H264 no codec detected for MP3 - (lavc) Checking video mode 960x540@32bpp : OK Could not grab image (select timeout): Resource temporarily unavailable Could not grab image (select timeout): Resource temporarily unavailable Could not grab image (select timeout): Resource temporarily unavailable Could not grab image (select timeout): Resource temporarily unavailable Could not grab image (select timeout): Resource temporarily unavailable Could not grab image (select timeout): Resource temporarily unavailable Could not grab image (select timeout): Resource temporarily unavailable Could not grab image (select timeout): Resource temporarily unavailable Could not grab image (select timeout): Resource temporarily unavailable write /home/ubuntu/.guvcviewrc OK free controls cleaned allocations - 100% Closing portaudio ...OK Closing GTK... OK ubuntu@ubuntu:~$ Any help would be greatly appreciated. Only clue I have is that I initially was having problems, tried using the old method of fixing isights (involving installing isight-firmware-tools) before realizing that I just hadn't turned on the VM setting to allow the VM to access the webcam. :) Anyway, I wonder if installing that messed something up. However, I think this is a red herring because I've: shut down and turned back on the Mac, restarted the VM, tried a different VM (for which I never installed isight-firmware-tools, and created an entirely new ubuntu vm. All instances have had this problem. Similarly, other viewers, such as cheese, avplay, avconv have had all various kinds of errors.

  Read the article

• So you want a French Site?

  - by juanlarios

  I thought I would write a quick write up of how to create a french site in SharePoint 2007. I'm not talking about a Variation but just a plain French Site from the ground up. There were some gotchas that I felt were worth blogging about. First:  go to Microsoft Telnet Article and follow the install instructions. Make sure that when you get to the download page that you select "French" as part of the drop down and you download and install the right language pack. I noticed that if you did not click the "change" button enven though I selected the 'french' language pack, it reverted back to the english language pack.   Second: You will notice a couple of things. When you go to central admin you will see the following:    Now you can pick between french site or english. You will get this if you install other language packs and they will be listed in the drop down. You will notice that you now have french headings and frech listings of sites. You see "Publishing" as a heading because I have a custom site definition that I deployed as a french site. Third: As you start navigating around and trying to create document libraries or sites you will start getting errors. Errors like the following: "Cannot make a cache safe URL for "SelectorControls.js", file not found. Please verify that the file exists under the layouts directory. " Troubleshoot issues with Windows SharePoint Services. Once you resolve the issue with this "js" file, you will find that there are other js files that are missing. The only problem is that if you are not fluent in French or the language you are trying to deploy, Well, you'll have a tough time understanding error messages as they will all be in the new language you are trying to deploy. So let's just talk about what happened when you installed the language pack. In the 12 Hive:  12/Template    you will now see a 1033 folder and a 1036 folder. The 1036 folder is the folder that was created and added as part of the language pack. What the above error is saying is that now that it's looking at the 1036 folder, well, it's missing some files. The nice thing is that these files are included in the 1033 folder (which is the English Language Pack). Simply copy and paste the controls from the one folder to the other. There will be more than one conflict so you will have to move serveral controls over. Can't remember how many but simply add them as error messages come up. I had to add some navigation controls and some content selectors.   Now that's all that you need to install the Frech Language pack anc reate site collections that are entirely in a another language. Do not mistake this with Variations, where you can have multiple language sites. For those of you doing a little bit extra with this, let me share what I was doing extra and what I needed to get it working for me. I had had a custom site definition which was obviously not showing up in my selection of french sites. I was under the impression that all sites in English would show up in french and that the sites were simply routed to a new Resource file for french content. And that is the case but there is a little extra that needs to be done if you have a custom site definition deployed:  First: Under hive 12/Template/1033/XML  there is a listing of site definition files that are deployed to the English side of things. If you navigate to 12/Template/1036/XML  and open one of the site definitions you will see that they are similar and reference the existing site definitions installed on the server, except that they have some french added to descriptions and names. Simply copy the xml file of your custom template to the 1036 folder to have it show up as a selection when you select French as the dropdown entry when create a site colleciton. You can go ahead and change the description and name to suit the language it's under.    Second: As part of my site definition, I packaed up several list templates, that were saved as STP files. When you navigate to the list template listing, well, the templates are for English sites, not French so I cannot create document libraries based on the template. What now? well here comes KWIzCom to the rescue! They seem to have put out a "STP language converter" where you can take a site template or list template and convert it to any target language you are after. It's a free download, Use it and you're good to go.  One thing I will mention is that when I convereted the English documents I whent ahead and converted them to French-Canadien. And it didn't work! so I finally figured out that the French Version it was expecting in the french site was "French-France". Don't know why that is, it's just what needs to be done to get that working. When I did that, I was able to use the List templates that I created in the English site for the French Site.   Hope it helps , good luck!

  Read the article

• 2D Selective Gaussian Blur

  - by Joshua Thomas

  I am attempting to use Gaussian blur on a 2D platform game, selectively blurring specific types of platforms with different amounts. I am currently just messing around with simple test code, trying to get it to work correctly. What I need to eventually do is create three separate render targets, leave one normal, blur one slightly, and blur the last heavily, then recombine on the screen. Where I am now is I have successfully drawn into a new render target and performed the gaussian blur on it, but when I draw it back to the screen everything is purple aside from the platforms I drew to the target. This is my .fx file: #define RADIUS 7 #define KERNEL_SIZE (RADIUS * 2 + 1) //----------------------------------------------------------------------------- // Globals. //----------------------------------------------------------------------------- float weights[KERNEL_SIZE]; float2 offsets[KERNEL_SIZE]; //----------------------------------------------------------------------------- // Textures. //----------------------------------------------------------------------------- texture colorMapTexture; sampler2D colorMap = sampler_state { Texture = <colorMapTexture>; MipFilter = Linear; MinFilter = Linear; MagFilter = Linear; }; //----------------------------------------------------------------------------- // Pixel Shaders. //----------------------------------------------------------------------------- float4 PS_GaussianBlur(float2 texCoord : TEXCOORD) : COLOR0 { float4 color = float4(0.0f, 0.0f, 0.0f, 0.0f); for (int i = 0; i < KERNEL_SIZE; ++i) color += tex2D(colorMap, texCoord + offsets[i]) * weights[i]; return color; } //----------------------------------------------------------------------------- // Techniques. //----------------------------------------------------------------------------- technique GaussianBlur { pass { PixelShader = compile ps_2_0 PS_GaussianBlur(); } } This is the code I'm using for the gaussian blur: public Texture2D PerformGaussianBlur(Texture2D srcTexture, RenderTarget2D renderTarget1, RenderTarget2D renderTarget2, SpriteBatch spriteBatch) { if (effect == null) throw new InvalidOperationException("GaussianBlur.fx effect not loaded."); Texture2D outputTexture = null; Rectangle srcRect = new Rectangle(0, 0, srcTexture.Width, srcTexture.Height); Rectangle destRect1 = new Rectangle(0, 0, renderTarget1.Width, renderTarget1.Height); Rectangle destRect2 = new Rectangle(0, 0, renderTarget2.Width, renderTarget2.Height); // Perform horizontal Gaussian blur. game.GraphicsDevice.SetRenderTarget(renderTarget1); effect.CurrentTechnique = effect.Techniques["GaussianBlur"]; effect.Parameters["weights"].SetValue(kernel); effect.Parameters["colorMapTexture"].SetValue(srcTexture); effect.Parameters["offsets"].SetValue(offsetsHoriz); spriteBatch.Begin(0, BlendState.Opaque, null, null, null, effect); spriteBatch.Draw(srcTexture, destRect1, Color.White); spriteBatch.End(); // Perform vertical Gaussian blur. game.GraphicsDevice.SetRenderTarget(renderTarget2); outputTexture = (Texture2D)renderTarget1; effect.Parameters["colorMapTexture"].SetValue(outputTexture); effect.Parameters["offsets"].SetValue(offsetsVert); spriteBatch.Begin(0, BlendState.Opaque, null, null, null, effect); spriteBatch.Draw(outputTexture, destRect2, Color.White); spriteBatch.End(); // Return the Gaussian blurred texture. game.GraphicsDevice.SetRenderTarget(null); outputTexture = (Texture2D)renderTarget2; return outputTexture; } And this is the draw method affected: public void Draw(SpriteBatch spriteBatch) { device.SetRenderTarget(maxBlur); spriteBatch.Begin(); foreach (Brick brick in blueBricks) brick.Draw(spriteBatch); spriteBatch.End(); blue = gBlur.PerformGaussianBlur((Texture2D) maxBlur, helperTarget, maxBlur, spriteBatch); spriteBatch.Begin(); device.SetRenderTarget(null); foreach (Brick brick in redBricks) brick.Draw(spriteBatch); foreach (Brick brick in greenBricks) brick.Draw(spriteBatch); spriteBatch.Draw(blue, new Rectangle(0, 0, blue.Width, blue.Height), Color.White); foreach (Brick brick in purpleBricks) brick.Draw(spriteBatch); spriteBatch.End(); } I'm sorry about the massive brick of text and images(or not....new user, I tried, it said no), but I wanted to get my problem across clearly as I have been searching for an answer to this for quite a while now. As a side note, I have seen the bloom sample. Very well commented, but overly complicated since it deals in 3D; I was unable to take what I needed to learn form it. Thanks for any and all help.

  Read the article

• My Right-to-Left Foot (T-SQL Tuesday #13)

  - by smisner

  As a business intelligence consultant, I often encounter the situation described in this month's T-SQL Tuesday, hosted by Steve Jones ( Blog | Twitter) – “What the Business Says Is Not What the  Business Wants.” Steve posed the question, “What issues have you had in interacting with the business to get your job done?” My profession requires me to have one foot firmly planted in the technology world and the other foot planted in the business world. I learned long ago that the business never says exactly what the business wants because the business doesn't have the words to describe what the business wants accurately enough for IT. Not only do technological-savvy barriers exist, but there are also linguistic barriers between the two worlds. So how do I cope? The adage "a picture is worth a thousand words" is particularly helpful when I'm called in to help design a new business intelligence solution. Many of my students in BI classes have heard me explain ("rant") about left-to-right versus right-to-left design. To understand what I mean about these two design options, let's start with a picture: When we design a business intelligence solution that includes some sort of traditional data warehouse or data mart design, we typically place the data sources on the left, the new solution in the middle, and the users on the right. When I've been called in to help course-correct a failing BI project, I often find that IT has taken a left-to-right approach. They look at the data sources, decide how to model the BI solution as a _______ (fill in the blank with data warehouse, data mart, cube, etc.), and then build the new data structures and supporting infrastructure. (Sometimes, they actually do this without ever having talked to the business first.) Then, when they show what they've built to the business, the business says that is not what we want. Uh-oh. I prefer to take a right-to-left approach. Preferably at the beginning of a project. But even if the project starts left-to-right, I'll do my best to swing it around so that we’re back to a right-to-left approach. (When circumstances are beyond my control, I carry on, but it’s a painful project for everyone – not because of me, but because the approach just doesn’t get to what the business wants in the most effective way.) By using a right to left approach, I try to understand what it is the business is trying to accomplish. I do this by having them explain reports to me, and explaining the decision-making process that relates to these reports. Sometimes I have them explain to me their business processes, or better yet show me their business processes in action because I need pictures, too. I (unofficially) call this part of the project "getting inside the business's head." This is starting at the right side of the diagram above. My next step is to start moving leftward. I do this by preparing some type of prototype. Depending on the nature of the project, this might mean that I simply mock up some data in a relational database and build a prototype report in Reporting Services. If I'm lucky, I might be able to use real data in a relational database. I'll either use a subset of the data in the prototype report by creating a prototype database to hold the sample data, or select data directly from the source. It all depends on how much data there is, how complex the queries are, and how fast I need to get the prototype completed. If the solution will include Analysis Services, then I'll build a prototype cube. Analysis Services makes it incredibly easy to prototype. You can sit down with the business, show them the prototype, and have a meaningful conversation about what the BI solution should look like. I know I've done a good job on the prototype when I get knocked out of my chair so that the business user can explore the solution further independently. (That's really happened to me!) We can talk about dimensions, hierarchies, levels, members, measures, and so on with something tangible to look at and without using those terms. It's not helpful to use sample data like Adventure Works or to use BI terms that they don't really understand. But when I show them their data using the BI technology and talk to them in their language, then they truly have a picture worth a thousand words. From that, we can fine tune the prototype to move it closer to what they want. They have a better idea of what they're getting, and I have a better idea of what to build. So right to left design is not truly moving from the right to the left. But it starts from the right and moves towards the middle, and once I know what the middle needs to look like, I can then build from the left to meet in the middle. And that’s how I get past what the business says to what the business wants.

  Read the article

< Previous Page | 395 396 397 398 399 400 401 402 403 404 405 406  | Next Page >