Search Results

Search found 1469 results on 59 pages for 'antony joe'.

Page 4/59 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Begin the Clone Wars Have!

  - by Antony Reynolds

  Creating a New Virtual Machine from an Existing Virtual Disk In previous posts I described how I set up an OEL6 machine under VirtualBox that can run an 11gR2 database and FMW 11.1.1.5.  That is great if you want the DB and FMW running in the same virtual image and it has served me well for some proof of concepts and also for some testing of different JVMs.  However I also wanted to run some testing of FMW with the database running on a separate physical machine.  So in this post I will show how to take a VirtualBox image and create a new image based on the disks from that original image. What are my Options? There is more than one way to skin a cat, or in this case to create two separate VMs that can run on different hardware.  Some of the options include: Create new virtual disk images for each new VM. Clone the existing disk images and point the new VM at the cloned images. Point the new VM at the existing snapshots. #1 is too much like hard work, install OEL twice, install a database again, install FMW again, run RCU again!  Life is too short! #2 is probably the safest way of doing things.  VirtualBox allows you to clone a disk image for use in a separate machine.  However this of course duplicates the disk and means that it is now occupying 3 times the space, once for the original disk and twice more for the two clones I would need. #3 is the most space efficient way of doing things.  It does mean however that I can only run the new “cloned” images if I have access to the original image because that is where the base snapshots reside.  However this is not a problem for me as long as I remember to keep all threee images together.  So this is the approach we will follow. Snapshot, What Snapshot? As we are going to create new virtual machines based on existing snapshots we need to figure out which snapshot to use.  We do this by opening the “Media Manager” from within VirtualBox and moving the mouse over the snapshot images until we find the snapshots we want – the snapshot name is identified in the “Attached to:” comment.  In my case I wanted the FMW installed snapshot because that had a database configured for FMW alongside the FMW software.  I made a note of the filename of that snapshot (actually I just noted the first 5 characters as that was all that was needed to uniquely identify the snapshot file). When we create the new machines we will point them at the snapshot filename we have just checked. Network or NotWork? Because we want the two new machines to communicate with each other when hosted in different physical machines we can’t use the default NAT networking mode without a lot of hassle.  But at the same time we need them to have fixed IP addresses relative to each other so that they can see each other whilst also being able to see the outside world. To achieve all these requirements I created two network adapters for each machine.  Adapter 1 was a standard NAT mapping.  This will allow each machine to get a dynamic IP address (10.0.2.15 by default) that can be used to access the external world through the VBox provided NAT gateway.  This is the same as the existing configuration. The second adapter I created as a bridged adapter.  This gives the virtual machine direct access to the host network card and by using fixed IP addresses each machine can see the other.  It is important to choose fixed IP addresses that are not routable across your internal network so you don’t get any clashes with other machines on your network.  Of course you could always get proper fixed IP addresses from your network people, but I have serveral people using my images and as long as I don’t have two instances of the same VM on the same network segment this is easier and avoids reconfiguring the network every time someone wants a copy of my VM.  If it is available I would suggest using the 10.0.3.* network as 10.0.2.* is the default NAT network.  You can check availability by pinging 10.0.3.1 and 10.0.3.2 from your host machine.  If it times out then you are probably safe to use that. Creating the New VMs Now that I had collected the data that I needed I went ahead and created the new VMs. When asked for a “Boot Hard Disk” I used the “Choose a virtual hard disk file…” link to find the snapshot I had previously selected and set that to be the existing hard disk.  I chose the previously existing SOA 11.1.1.5 install for both the new DB and FMW machines because that snapshot had the database with the RCU completed that I wanted for my DB machine and it had the SOA software installed which I wanted for my FMW machine. After the initial creation of the virtual machine go into the network setting section and enable a second adapter which will be bridged.  Make a note of the MAC addresses (the last four digits should be sufficient) of the two adapters so that you can later set the bridged adapter to use fixed IP and the NAT adapter to use DHCP. We are now ready to start the VMs and reconfigure Linux. Reconfiguring Linux Because I now have two new machines I need to change their network configuration.  In particular I need to change the hostname, update the hosts file and change the network settings. Changing the Hostname I renamed both hosts by running the hostname command as root: hostname vboxfmw.oracle.com I also edited the /etc/sysconfig file and set the correct hostname in there. HOSTNAME=vboxfmw.oracle.com Changing the Network Settings I needed to change the network configuration to give the bridged network a fixed IP address.  I first explicitly set the MAC addresses of the two adapters, because the order of the virtual adapters in the VirtualBox Manager is not necessarily the same as the order of the adapters in the guest OS.  So I went in to the System->Preferences->Network Connections screen and explicitly set the “Device MAC address” for the two adapters. Having correctly mapped the Linux adapters to the VirtualBox adapters I then set the Bridged adapter to use fixed IP addressing rather than DHCP.  There is no need for additional routing or default gateways because we expect the two machine to be on the same LAN segment. Updating the Hosts File Having renamed the machines and reconfigured the network I then updated the /etc/hosts file to refer to the new machine name add a new line to the hosts file to provide an additional IP address for my server (the new fixed IP address) add a new line for the fixed IP address of the other virtual machine 10.0.3.101      vboxdb.oracle.com       vboxdb  # Added by NetworkManager 10.0.2.15       vboxdb.oracle.com       vboxdb  # Added by NetworkManager 10.0.3.102      vboxfmw.oracle.com      vboxfmw # Added by NetworkManager 127.0.0.1       localhost.localdomain   localhost ::1     vboxdb.oracle.com       vboxdb  localhost6.localdomain6 localhost6 To make sure everything takes effect I restarted the server. Reconfiguring the Database on the DB Machine Because we changed the hostname the listener and the EM console no longer start so I need to modify the listener.ora to use the new hostname and I also need to rebuild the EM configuration because it also relies on the hostname. I edited the $ORACLE_HOME/network/admin/listener.ora and changed the listening address to the new hostname:       (ADDRESS = (PROTOCOL = TCP)(HOST = vboxdb.oracle.com)(PORT = 1521)) After changing the listener.ora I was able to start the listener using: lsnrctl start I also had to reconfigure the EM database control.  I first deconfigured it using the command: emca -deconfig dbcontrol db -repos drop This drops the repository and removes any existing registered dbcontrols. I then re-configured it using the following command: emca -config dbcontrol db -repos create This creates the EM repository and then configures and starts dbcontrol. Now my database machine is ready so I can close it down and take a snapshot. Disabling the Database on the FMW Machine I set up the database to start automatically by creating a service called “dbora”.  On the FMW machine I do not need the database running so I can prevent it auto-starting by running the following command: chkconfig –del dbora Note that because I am using a snapshot it is not a waste of disk space to have the DB installed but not used.  As long as I don’t run it, it won’t cost me anything. I can now close the FMW machine down and take a snapshot. Creating a New Domain The FMW machine is now ready to create a new domain.  When creating the domain I can point it at the second machine which is running the database.  I can potentially run these machines on two separate physical machines as long as I have the original virtual machine available to both of the physical machines. Gotchas in Snapshotting VirtualBox does not support the concept of linked machines in a network like some virtualization technologies so when creating a snapshot it is a good idea to shut both VMs down and then take a snapshot on both of them.  This is because we want to keep the database in sync with the middleware.  One way to make sure that this happens would be to place all the domain configuration files on the database server via an NFS share, this would mean that all we would need to snapshot would be the database machine because that would hold all the state and configuration. The Sky’s the Limit We have covered a simple case of having just two machines.  I have a more complicated configuration in which two machine run a RAC database off the same base OS image, and two more machines run a SOA cluster based on the same OS image.  Just remember what machine holds state and what are the consequences of taking a snapshot.

  Read the article

• Following the Thread in OSB

  - by Antony Reynolds

  Threading in OSB The Scenario I recently led an OSB POC where we needed to get high throughput from an OSB pipeline that had the following logic: 1. Receive Request 2. Send Request to External System 3. If Response has a particular value   3.1 Modify Request   3.2 Resend Request to External System 4. Send Response back to Requestor All looks very straightforward and no nasty wrinkles along the way.  The flow was implemented in OSB as follows (see diagram for more details): Proxy Service to Receive Request and Send Response Request Pipeline   Copies Original Request for use in step 3 Route Node   Sends Request to External System exposed as a Business Service Response Pipeline   Checks Response to Check If Request Needs to Be Resubmitted Modify Request Callout to External System (same Business Service as Route Node) The Proxy and the Business Service were each assigned their own Work Manager, effectively giving each of them their own thread pool. The Surprise Imagine our surprise when, on stressing the system we saw it lock up, with large numbers of blocked threads.  The reason for the lock up is due to some subtleties in the OSB thread model which is the topic of this post.   Basic Thread Model OSB goes to great lengths to avoid holding on to threads.  Lets start by looking at how how OSB deals with a simple request/response routing to a business service in a route node. Most Business Services are implemented by OSB in two parts.  The first part uses the request thread to send the request to the target.  In the diagram this is represented by the thread T1.  After sending the request to the target (the Business Service in our diagram) the request thread is released back to whatever pool it came from.  A multiplexor (muxer) is used to wait for the response.  When the response is received the muxer hands off the response to a new thread that is used to execute the response pipeline, this is represented in the diagram by T2. OSB allows you to assign different Work Managers and hence different thread pools to each Proxy Service and Business Service.  In out example we have the “Proxy Service Work Manager” assigned to the Proxy Service and the “Business Service Work Manager” assigned to the Business Service.  Note that the Business Service Work Manager is only used to assign the thread to process the response, it is never used to process the request. This architecture means that while waiting for a response from a business service there are no threads in use, which makes for better scalability in terms of thread usage. First Wrinkle Note that if the Proxy and the Business Service both use the same Work Manager then there is potential for starvation.  For example: Request Pipeline makes a blocking callout, say to perform a database read. Business Service response tries to allocate a thread from thread pool but all threads are blocked in the database read. New requests arrive and contend with responses arriving for the available threads. Similar problems can occur if the response pipeline blocks for some reason, maybe a database update for example. Solution The solution to this is to make sure that the Proxy and Business Service use different Work Managers so that they do not contend with each other for threads. Do Nothing Route Thread Model So what happens if there is no route node?  In this case OSB just echoes the Request message as a Response message, but what happens to the threads?  OSB still uses a separate thread for the response, but in this case the Work Manager used is the Default Work Manager. So this is really a special case of the Basic Thread Model discussed above, except that the response pipeline will always execute on the Default Work Manager.   Proxy Chaining Thread Model So what happens when the route node is actually calling a Proxy Service rather than a Business Service, does the second Proxy Service use its own Thread or does it re-use the thread of the original Request Pipeline? Well as you can see from the diagram when a route node calls another proxy service then the original Work Manager is used for both request pipelines.  Similarly the response pipeline uses the Work Manager associated with the ultimate Business Service invoked via a Route Node.  This actually fits in with the earlier description I gave about Business Services and by extension Route Nodes they “… uses the request thread to send the request to the target”. Call Out Threading Model So what happens when you make a Service Callout to a Business Service from within a pipeline.  The documentation says that “The pipeline processor will block the thread until the response arrives asynchronously” when using a Service Callout.  What this means is that the target Business Service is called using the pipeline thread but the response is also handled by the pipeline thread.  This implies that the pipeline thread blocks waiting for a response.  It is the handling of this response that behaves in an unexpected way. When a Business Service is called via a Service Callout, the calling thread is suspended after sending the request, but unlike the Route Node case the thread is not released, it waits for the response.  The muxer uses the Business Service Work Manager to allocate a thread to process the response, but in this case processing the response means getting the response and notifying the blocked pipeline thread that the response is available.  The original pipeline thread can then continue to process the response. Second Wrinkle This leads to an unfortunate wrinkle.  If the Business Service is using the same Work Manager as the Pipeline then it is possible for starvation or a deadlock to occur.  The scenario is as follows: Pipeline makes a Callout and the thread is suspended but still allocated Multiple Pipeline instances using the same Work Manager are in this state (common for a system under load) Response comes back but all Work Manager threads are allocated to blocked pipelines. Response cannot be processed and so pipeline threads never unblock – deadlock! Solution The solution to this is to make sure that any Business Services used by a Callout in a pipeline use a different Work Manager to the pipeline itself. The Solution to My Problem Looking back at my original workflow we see that the same Business Service is called twice, once in a Routing Node and once in a Response Pipeline Callout.  This was what was causing my problem because the response pipeline was using the Business Service Work Manager, but the Service Callout wanted to use the same Work Manager to handle the responses and so eventually my Response Pipeline hogged all the available threads so no responses could be processed. The solution was to create a second Business Service pointing to the same location as the original Business Service, the only difference was to assign a different Work Manager to this Business Service.  This ensured that when the Service Callout completed there were always threads available to process the response because the response processing from the Service Callout had its own dedicated Work Manager. Summary Request Pipeline Executes on Proxy Work Manager (WM) Thread so limited by setting of that WM.  If no WM specified then uses WLS default WM. Route Node Request sent using Proxy WM Thread Proxy WM Thread is released before getting response Muxer is used to handle response Muxer hands off response to Business Service (BS) WM Response Pipeline Executes on Routed Business Service WM Thread so limited by setting of that WM.  If no WM specified then uses WLS default WM. No Route Node (Echo functionality) Proxy WM thread released New thread from the default WM used for response pipeline Service Callout Request sent using proxy pipeline thread Proxy thread is suspended (not released) until the response comes back Notification of response handled by BS WM thread so limited by setting of that WM.  If no WM specified then uses WLS default WM. Note this is a very short lived use of the thread After notification by callout BS WM thread that thread is released and execution continues on the original pipeline thread. Route/Callout to Proxy Service Request Pipeline of callee executes on requestor thread Response Pipeline of caller executes on response thread of requested proxy Throttling Request message may be queued if limit reached. Requesting thread is released (route node) or suspended (callout) So what this means is that you may get deadlocks caused by thread starvation if you use the same thread pool for the business service in a route node and the business service in a callout from the response pipeline because the callout will need a notification thread from the same thread pool as the response pipeline.  This was the problem we were having. You get a similar problem if you use the same work manager for the proxy request pipeline and a business service callout from that request pipeline. It also means you may want to have different work managers for the proxy and business service in the route node. Basically you need to think carefully about how threading impacts your proxy services. References Thanks to Jay Kasi, Gerald Nunn and Deb Ayers for helping to explain this to me.  Any errors are my own and not theirs.  Also thanks to my colleagues Milind Pandit and Prasad Bopardikar who travelled this road with me. OSB Thread Model Great Blog Post on Thread Usage in OSB

  Read the article

• Open World Day 1 Continued

  - by Antony Reynolds

  A Day in the Life of an Oracle OpenWorld Attendee Part II A couple of things I forgot to mention about yesterdays OpenWorld. First I attended a presentation on SOA Suite and Virtualization which explained how Oracle Virtual Assembly Builder (OVAB) can be used to accelerate the deployment of an Enterprise Deployment Guide (EDG) compliant SOA Suite infrastructure.  OVAB provides the ability to introspect a deployed software component such as WebLogic Server, SOA Suite or other components and extract the configuration and package it up for rapid deployment into an Oracle Virtual Machine.  OVAB allows multiple machines to be configured and connections made between the machines and outside resources such as databases.  That by itself is pretty cool and has been available for a while in OVAB.  What is new is that Oracle has done this for an EDG compliant installations and made it available as an OVAB assembly for customers to use, significantly accelerating the deployment of an EDG deployment.  A real help for customers standing up EDG environments, particularly in test, dev and QA environments. The other thing I forgot to mention was the most memorable demo I saw at OpenWorld.  This was done by my co-author Matt Wright who was showcasing the products of his company Rubicon Red.  They showed a really cool application called OneSpot which puts all the information about a single users business processes in one spot!  Apparently a customer suggested the name.  It allows business flows to be defined that map onto events.  As events occur the status of the business flow is updated to reflect the change.  The interface is strongly reminiscent of social media sites and provides a graphical view of business flows.  So how does this differ from BPEL and BPM process flows?  The OneSpot process flow is more like a BAM process flow, it is based on events arriving from multiple sources, and is focused on the clients view of the process, not the actual business process.  This is important because it allows an end user to get a view of where his current business flow is and what actions, if any, are required of him.  This by itself is great, but better still is that OneSpot has a real time updating view of events that have occurred (BAM style no need to refresh the browser).  This means that as new events occur the end user can see them and jump to the business flow or take other appropriate actions.  Under the covers OneSpot makes use of Oracle Human Workflow to provide a forms interface, but this is not the HWF GUI you know!  The HWF GUI screens are much prettier and have more of a social media feel about them due to their use of images and pulling in relevant related information.  If you are at OOW I strongly recommend you visit Matt or John at the Rubicon Red stand and ask, no demand a demo of OneSpot!

  Read the article

• Building a SOA/BPM/BAM Cluster Part I &ndash; Preparing the Environment

  - by antony.reynolds

  An increasing number of customers are using SOA Suite in a cluster configuration, I might hazard to say that the majority of production deployments are now using SOA clusters.  So I thought it may be useful to detail the steps in building an 11g cluster and explain a little about why things are done the way they are. In this series of posts I will explain how to build a SOA/BPM cluster using the Enterprise Deployment Guide. This post will explain the setting required to prepare the cluster for installation and configuration. Software Required The following software is required for an 11.1.1.3 SOA/BPM install. Software Version Notes Oracle Database Certified databases are listed here SOA & BPM Suites require a working database installation. Repository Creation Utility (RCU) 11.1.1.3 If upgrading an 11.1.1.2 repository then a separate script is available. Web Tier Utilities 11.1.1.3 Provides Web Server, 11.1.1.3 is an upgrade to 11.1.1.2, so 11.1.1.2 must be installed first. Web Tier Utilities 11.1.1.3 Web Server, 11.1.1.3 Patch.  You can use the 11.1.1.2 version without problems. Oracle WebLogic Server 11gR1 10.3.3 This is the host platform for 11.1.1.3 SOA/BPM Suites. SOA Suite 11.1.1.2 SOA Suite 11.1.1.3 is an upgrade to 11.1.1.2, so 11.1.1.2 must be installed first. SOA Suite 11.1.1.3 SOA Suite 11.1.1.3 patch, requires 11.1.12 to have been installed. My installation was performed on Oracle Enterprise Linux 5.4 64-bit. Database I will not cover setting up the database in this series other than to identify the database requirements.  If setting up a SOA cluster then ideally we would also be using a RAC database.  I assume that this is running on separate machines to the SOA cluster.  Section 2.1, “Database”, of the EDG covers the database configuration in detail. Settings The database should have processes set to at least 400 if running SOA/BPM and BAM. alter system set processes=400 scope=spfile Run RCU The Repository Creation Utility creates the necessary database tables for the SOA Suite.  The RCU can be run from any machine that can access the target database.  In 11g the RCU creates a number of pre-defined users and schema with a user defiend prefix.  This allows you to have multiple 11g installations in the same database. After running the RCU you need to grant some additional privileges to the soainfra user.  The soainfra user should have privileges on the transaction tables. grant select on sys.dba_pending_transactions to prefix_soainfra Grant force any transaction to prefix_soainfra Machines The cluster will be built on the following machines. EDG Name is the name used for this machine in the EDG. Notes are a description of the purpose of the machine. EDG Name Notes LB External load balancer to distribute load across and failover between web servers. WEBHOST1 Hosts a web server. WEBHOST2 Hosts a web server. SOAHOST1 Hosts SOA components. SOAHOST2 Hosts SOA components. BAMHOST1 Hosts BAM components. BAMHOST2 Hosts BAM components. Note that it is possible to collapse the BAM servers so that they run on the same machines as the SOA servers. In this case BAMHOST1 and SOAHOST1 would be the same, as would BAMHOST2 and SOAHOST2. The cluster may include more than 2 servers and in this case we add SOAHOST3, SOAHOST4 etc as needed. My cluster has WEBHOST1, SOAHOST1 and BAMHOST1 all running on a single machine. Software Components The cluster will use the following software components. EDG Name is the name used for this machine in the EDG. Type is the type of component, generally a WebLogic component. Notes are a description of the purpose of the component. EDG Name Type Notes AdminServer Admin Server Domain Admin Server WLS_WSM1 Managed Server Web Services Manager Policy Manager Server WLS_WSM2 Managed Server Web Services Manager Policy Manager Server WLS_SOA1 Managed Server SOA/BPM Managed Server WLS_SOA2 Managed Server SOA/BPM Managed Server WLS_BAM1 Managed Server BAM Managed Server running Active Data Cache WLS_BAM2 Managed Server BAM Manager Server without Active Data Cache   Node Manager Will run on all hosts with WLS servers OHS1 Web Server Oracle HTTP Server OHS2 Web Server Oracle HTTP Server LB Load Balancer Load Balancer, not part of SOA Suite The above assumes a 2 node cluster. Network Configuration The SOA cluster requires an extensive amount of network configuration.  I would recommend assigning a private sub-net (internal IP addresses such as 10.x.x.x, 192.168.x.x or 172.168.x.x) to the cluster for use by addresses that only need to be accessible to the Load Balancer or other cluster members.  Section 2.2, "Network", of the EDG covers the network configuration in detail. EDG Name is the hostname used in the EDG. IP Name is the IP address name used in the EDG. Type is the type of IP address: Fixed is fixed to a single machine. Floating is assigned to one of several machines to allow for server migration. Virtual is assigned to a load balancer and used to distribute load across several machines. Host is the host where this IP address is active.  Note for floating IP addresses a range of hosts is given. Bound By identifies which software component will use this IP address. Scope shows where this IP address needs to be resolved. Cluster scope addresses only have to be resolvable by machines in the cluster, i.e. the machines listed in the previous section.  These addresses are only used for inter-cluster communication or for access by the load balancer. Internal scope addresses Notes are comments on why that type of IP is used. EDG Name IP Name Type Host Bound By Scope Notes ADMINVHN VIP1 Floating SOAHOST1-SOAHOSTn AdminServer Cluster Admin server, must be able to migrate between SOA server machines. SOAHOST1 IP1 Fixed SOAHOST1 NodeManager, WLS_WSM1 Cluster WSM Server 1 does not require server migration. SOAHOST2 IP2 Fixed SOAHOST1 NodeManager, WLS_WSM2 Cluster WSM Server 2 does not require server migration SOAHOST1VHN VIP2 Floating SOAHOST1-SOAHOSTn WLS_SOA1 Cluster SOA server 1, must be able to migrate between SOA server machines SOAHOST2VHN VIP3 Floating SOAHOST1-SOAHOSTn WLS_SOA2 Cluster SOA server 2, must be able to migrate between SOA server machines BAMHOST1 IP4 Fixed BAMHOST1 NodeManager Cluster   BAMHOST1VHN VIP4 Floating BAMHOST1-BAMHOSTn WLS_BAM1 Cluster BAM server 1, must be able to migrate between BAM server machines BAMHOST2 IP3 Fixed BAMHOST2 NodeManager, WLS_BAM2 Cluster BAM server 2 does not require server migration WEBHOST1 IP5 Fixed WEBHOST1 OHS1 Cluster   WEBHOST2 IP6 Fixed WEBHOST2 OHS2 Cluster   soa.mycompany.com VIP5 Virtual LB LB Public External access point to SOA cluster. admin.mycompany.com VIP6 Virtual LB LB Internal Internal access to WLS console and EM soainternal.mycompany.com VIP7 Virtual LB LB Internal Internal access point to SOA cluster Floating IP addresses are IP addresses that may be re-assigned between machines in the cluster.  For example in the event of failure of SOAHOST1 then WLS_SOA1 will need to be migrated to another server.  In this case VIP2 (SOAHOST1VHN) will need to be activated on the new target machine.  Once set up the node manager will manage registration and removal of the floating IP addresses with the exception of the AdminServer floating IP address. Note that if the BAMHOSTs and SOAHOSTs are the same machine then you can obviously share the hostname and fixed IP addresses, but you still need separate floating IP addresses for the different managed servers.  The hostnames don’t have to be the ones given in the EDG, but they must be distinct in the same way as the ETC names are distinct.  If the type is a fixed IP then if the addresses are the same you can use the same hostname, for example if you collapse the soahost1, bamhost1 and webhost1 onto a single machine then you could refer to them all as HOST1 and give them the same IP address, however SOAHOST1VHN can never be the same as BAMHOST1VHN because these are floating IP addresses. Notes on DNS IP addresses that are of scope “Cluster” just need to be in the hosts file (/etc/hosts on Linux, C:\Windows\System32\drivers\etc\hosts on Windows) of all the machines in the cluster and the load balancer.  IP addresses that are of scope “Internal” need to be available on the internal DNS servers, whilst IP addresses of scope “Public” need to be available on external and internal DNS servers. Shared File System At a minimum the cluster needs shared storage for the domain configuration, XA transaction logs and JMS file stores.  It is also possible to place the software itself on a shared server.  I strongly recommend that all machines have the same file structure for their SOA installation otherwise you will experience pain!  Section 2.3, "Shared Storage and Recommended Directory Structure", of the EDG covers the shared storage recommendations in detail. The following shorthand is used for locations: ORACLE_BASE is the root of the file system used for software and configuration files. MW_HOME is the location used by the installed SOA/BPM Suite installation.  This is also used by the web server installation.  In my installation it is set to <ORACLE_BASE>/SOA11gPS2. ORACLE_HOME is the location of the Oracle SOA components or the Oracle Web components.  This directory is installed under the the MW_HOME but the name is decided by the user at installation, default values are Oracle_SOA1 and Oracle_Web1.  In my installation they are set to <MW_HOME>/Oracle_SOA and <MW_HOME>/Oracle _WEB. ORACLE_COMMON_HOME is the location of the common components and is located under the MW_HOME directory.  This is always <MW_HOME>/oracle_common. ORACLE_INSTANCE is used by the Oracle HTTP Server and/or Oracle Web Cache.  It is recommended to create it under <ORACLE_BASE>/admin.  In my installation they are set to <ORACLE_BASE>/admin/Web1, <ORACLE_BASE>/admin/Web2 and <ORACLE_BASE>/admin/WC1. WL_HOME is the WebLogic server home and is always found at <MW_HOME>/wlserver_10.3. Key file locations are shown below. Directory Notes <ORACLE_BASE>/admin/domain_name/aserver/domain_name Shared location for domain.  Used to allow admin server to manually fail over between machines.  When creating domain_name provide the aserver directory as the location for the domain. In my install this is <ORACLE_BASE>/admin/aserver/soa_domain as I only have one domain on the box. <ORACLE_BASE>/admin/domain_name/aserver/applications Shared location for deployed applications.  Needs to be provided when creating the domain. In my install this is <ORACLE_BASE>/admin/aserver/applications as I only have one domain on the box. <ORACLE_BASE>/admin/domain_name/mserver/domain_name Either unique location for each machine or can be shared between machines to simplify task of packing and unpacking domain.  This acts as the managed server configuration location.  Keeping it separate from Admin server helps to avoid problems with the managed servers messing up the Admin Server. In my install this is <ORACLE_BASE>/admin/mserver/soa_domain as I only have one domain on the box. <ORACLE_BASE>/admin/domain_name/mserver/applications Either unique location for each machine or can be shared between machines.  Holds deployed applications. In my install this is <ORACLE_BASE>/admin/mserver/applications as I only have one domain on the box. <ORACLE_BASE>/admin/domain_name/soa_cluster_name Shared directory to hold the following   dd – deployment descriptors   jms – shared JMS file stores   fadapter – shared file adapter co-ordination files   tlogs – shared transaction log files In my install this is <ORACLE_BASE>/admin/soa_cluster. <ORACLE_BASE>/admin/instance_name Local folder for web server (OHS) instance. In my install this is <ORACLE_BASE>/admin/web1 and <ORACLE_BASE>/admin/web2. I also have <ORACLE_BASE>/admin/wc1 for the Web Cache I use as a load balancer. <ORACLE_BASE>/product/fmw This can be a shared or local folder for the SOA/BPM Suite software.  I used a shared location so I only ran the installer once. In my install this is <ORACLE_BASE>/SOA11gPS2 All the shared files need to be put onto a shared storage media.  I am using NFS, but recommendation for production would be a SAN, with mirrored disks for resilience. Collapsing Environments To reduce the hardware requirements it is possible to collapse the BAMHOST, SOAHOST and WEBHOST machines onto a single physical machine.  This will require more memory but memory is a lot cheaper than additional machines.  For environments that require higher security then stay with a separate WEBHOST tier as per the EDG.  Similarly for high volume environments then keep a separate set of machines for BAM and/or Web tier as per the EDG. Notes on Dev Environments In a dev environment it is acceptable to use a a single node (non-RAC) database, but be aware that the config of the data sources is different (no need to use multi-data source in WLS).  Typically in a dev environment we will collapse the BAMHOST, SOAHOST and WEBHOST onto a single machine and use a software load balancer.  To test a cluster properly we will need at least 2 machines. For my test environment I used Oracle Web Cache as a load balancer.  I ran it on one of the SOA Suite machines and it load balanced across the Web Servers on both machines.  This was easy for me to set up and I could administer it from a web based console.

  Read the article

• Event Processed

  - by Antony Reynolds

  Installing Oracle Event Processing 11g Earlier this month I was involved in organizing the Monument Family History Day.  It was certainly a complex event, with dozens of presenters, guides and 100s of visitors.  So with that experience of a complex event under my belt I decided to refresh my acquaintance with Oracle Event Processing (CEP). CEP has a developer side based on Eclipse and a runtime environment. Developer Install The developer install requires several steps (documentation) Download required software Eclipse  (Linux) – It is recommended to use version 3.6.2 (Helios) Install Eclipse Unzip the download into the desired directory Start Eclipse Add Oracle CEP Repository in Eclipse http://download.oracle.com/technology/software/cep-ide/11/ Install Oracle CEP Tools for Eclipse 3.6 You may need to set the proxy if behind a firewall. Modify eclipse.ini If using Windows edit with wordpad rather than notepad Point to 1.6 JVM Insert following lines before –vmargs -vm \PATH_TO_1.6_JDK\jre\bin\javaw.exe Increase PermGen Memory Insert following line at end of file -XX:MaxPermSize=256M Restart eclipse and verify that everything is installed as expected. Server install The server install is very straightforward (documentation).  It is recommended to use the JRockit JDK with CEP so the steps to set up a working CEP server environment are: Download required software JRockit – I used Oracle “JRockit 6 - R28.2.5” which includes “JRockit Mission Control 4.1” and “JRockit Real Time 4.1”. Oracle Event Processor – I used “Complex Event Processing Release 11gR1 (11.1.1.6.0)” Install JRockit Run the JRockit installer, the download is an executable binary that just needs to be marked as executable. Install CEP Unzip the downloaded file Run the CEP installer,  the unzipped file is an executable binary that may need to be marked as executable. Choose a custom install and add the examples if needed. It is not recommended to add the examples to a production environment but they can be helpful in development. Voila The Deed Is Done With CEP installed you are now ready to start a server, if you didn’t install the demoes then you will need to create a domain before starting the server. Once the server is up and running (using startwlevs.sh) you can verify that the visualizer is available on http://hostname:port/wlevs, the default port for the demo domain is 9002. With the server running you can test the IDE by creating a new “Oracle CEP Application Project” and creating a new target environment pointing at your CEP installation. Much easier than organizing a Family History Day!

  Read the article

• Why are invariants important in Computer Science

  - by Antony Thomas

  I understand 'invariant' in its literal sense. I also recognize them when I type code. But I don't think I understand the importance of this term in the context of computer science. Whenever I read conversations\white papers about language design from famous programmers\computer scientists, the term 'invariant' keeps popping up as a jargon; and that is the part I don't understand. What is so special about it?

  Read the article

• Using the SOA-BPM VIrtualBox Appliance

  - by antony.reynolds

  Quickstart Guide to Using Oracle Appliance for SOA/BPM Recently I have been setting up some machines for fellow engineers.  My base setup consists of Oracle Enterprise Linux with Oracle Virtual Box.  Note that after installing VirtualBox I needed to add the VirtualBox Extension Pack to enable RDP access amongst other features.  In order to get them started quickly with some images I downloaded the pre-built appliance for SOA/BPM from OTN. Out of the box this provides a VirtualBox image that is pre-installed with everything you will need to develop SOA/BPM applications. Specifically by using the virtual appliance I got the following pre-installed and configured. Oracle Enterprise Linux 5 User oracle password oracle User root password oracle. Oracle Database XE Pre-configured with SOA/BPM repository. Set to auto-start on OS startup. Oracle SOA Suite 11g PS2 Configured with a “collapsed domain”, all services (SOA/BAM/EM) running in AdminServer. Listening on port 7001 Oracle BPM Suite 11g Configured in same domain as SOA Suite. Oracle JDeveloper 11g With SOA/BPM extensions. Networking The VM by default uses NAT (Network Address Translation) for network access.  Make sure that the advanced settings for port forwarding allow access through the host to guest ports.  It should be pre-configured to forward requests on the following ports Purpose Host Port Guest Port (VBox Image) SSH 2222 22 HTTP 7001 7001 Database 1521 1521 Note that only one VirtualBox image can use a given host port, so make sure you are not clashing if it seems not to work. What’s Left to Do? There is still some customization of the environment that may be required. If you need to configure a proxy server as I did then for the oracle and root users to set up an HTTP proxy Added “export http_proxy=http://proxy-host:proxy-port” to ~oracle/.bash_profile and ~root/.bash_profile Added “export http_proxy=http://proxy-host:proxy-port” to /etc/.bashrc Edited System->Preferences to set Network Proxy In Firefox set Preferences->Network->Connection Settings to “Use system proxy settings” In JDeveloper set Edit->Preferences->Web Browser and Proxy to required proxy settings You may need to configure yum to point to a public OEL yum repository – such as http://public-yum.oracle.com. If you are going to be accessing the SOA server from outside the VirtualBox image then you may want to set the soa-infra Server URLs to be the hostname of the host OS. Snap! Once I had the machine configured how I wanted to use it I took a snapshot so that I can always get back to the pristine install I have now.  Snapshots are one of the big benefits of putting a development environment into a virtualized environment.  I can make changes to my installation and if I mess it up I can restore the image to a last known good snapshot. Hey Presto!, Ready to Go This is the quickest way to get up and running with SOA/BPM Suite.  Out of the box the download will work, I only did extra customization so I could use services outside the firewall and browse outside the firewall from within by SOA VirtualBox image.  I also use yum to update the OS to the latest binaries. So have fun.

  Read the article

• Lost in Translation

  - by antony.reynolds

  Using the Correct Character Set for the SOA Suite Database A couple of years ago I spent a wonderful week in Tel Aviv helping with the first Oracle BAM implementation in Israel.  Although everyone I interacted spoke better English than I did, the screens and data for the implementation were all in Hebrew, meaning the Hebrew alphabet.  Over the week I learnt to recognize a few Hebrew words, enough to enable me to test what we were doing.  So I knew SOA Suite worked OK with non-English and non-Latin character sets so I was suspicious recently when a customer was having data corruption of non-Latin characters.  On investigation it turned out that the data received correctly in the SOA Suite, but then it was corrupted after being stored in the database. A little investigation revealed that the customer was using the default database character set, which is “WE8ISO8859P1” which, as the name suggests only supports West European 8-bit characters.  What was happening was that when the customer had installed his SOA repository he had ignored the message that his database was not using AL32UTF as the character. After changing the character set on his database he no longer saw the corruption of non-English character data. So the moral of this story is Always install the SOA Repository in to an AL32UTF8 Database This is true for both SOA Suite 10g and 11g.  Ignore it at your peril, because you never know when you will need to support Hebrew, or Japanese or another multi-byte character set.

  Read the article

• Memory Efficient Windows SOA Server

  - by Antony Reynolds

  Installing a Memory Efficient SOA Suite 11.1.1.6 on Windows Server Well 11.1.1.6 is now available for download so I thought I would build a Windows Server environment to run it.  I will minimize the memory footprint of the installation by putting all functionality into the Admin Server of the SOA Suite domain. Required Software 64-bit JDK SOA Suite If you want 64-bit then choose “Generic” rather than “Microsoft Windows 32bit JVM” or “Linux 32bit JVM” This has links to all the required software. If you choose “Generic” then the Repository Creation Utility link does not show, you still need this so change the platform to “Microsoft Windows 32bit JVM” or “Linux 32bit JVM” to get the software. Similarly if you need a database then you need to change the platform to get the link to XE for Windows or Linux. If possible I recommend installing a 64-bit JDK as this allows you to assign more memory to individual JVMs. Windows XE will work, but it is better if you can use a full Oracle database because of the limitations on XE that sometimes cause it to run out of space with large or multiple SOA deployments. Installation Steps The following flow chart outlines the steps required in installing and configuring SOA Suite. The steps in the diagram are explained below. 64-bit? Is a 64-bit installation required?  The Windows & Linux installers will install 32-bit versions of the Sun JDK and JRockit.  A separate JDK must be installed for 64-bit. Install 64-bit JDK The 64-bit JDK can be either Hotspot or JRockit.  You can choose either JDK 1.7 or 1.6. Install WebLogic If you are using 64-bit then install WebLogic using “java –jar wls1036_generic.jar”.  Make sure you include Coherence in the installation, the easiest way to do this is to accept the “Typical” installation. SOA Suite Required? If you are not installing SOA Suite then you can jump straight ahead and create a WebLogic domain. Install SOA Suite Run the SOA Suite installer and point it at the existing Middleware Home created for WebLogic.  Note to run the SOA installer on Windows the user must have admin privileges.  I also found that on Windows Server 2008R2 I had to start the installer from a command prompt with administrative privileges, granting it privileges when it ran caused it to ignore the jreLoc parameter. Database Available? Do you have access to a database into which you can install the SOA schema.  SOA Suite requires access to an Oracle database (it is supported on other databases but I would always use an oracle database). Install Database I use an 11gR2 Oracle database to avoid XE limitations.  Make sure that you set the database character set to be unicode (AL32UTF8).  I also disabled the new security settings because they get in the way for a developer database.  Don’t forget to check that number of processes is at least 150 and number of sessions is not set, or is set to at least 200 (in the DB init parameters). Run RCU The SOA Suite database schemas are created by running the Repository Creation Utility.  Install the “SOA and BPM Infrastructure” component to support SOA Suite.  If you keep the schema prefix as “DEV” then the config wizard is easier to complete. Run Config Wizard The Config wizard creates the domain which hosts the WebLogic server instances.  To get a minimum footprint SOA installation choose the “Oracle Enterprise Manager” and “Oracle SOA Suite for developers” products.  All other required products will be automatically selected. The “for developers” installs target the appropriate components at the AdminServer rather than creating a separate managed server to house them.  This reduces the number of JVMs required to run the system and hence the amount of memory required.  This is not suitable for anything other than a developer environment as it mixes the admin and runtime functions together in a single server.  It also takes a long time to load all the required modules, making start up a slow process. If it exists I would recommend running the config wizard found in the “oracle_common/common/bin” directory under the middleware home.  This should have access to all the templates, including SOA. If you also want to run BAM in the same JVM as everything else then you need to “Select Optional Configuration” for “Managed Servers, Clusters and Machines”. To target BAM at the AdminServer delete the “bam_server1” managed server that is created by default.  This will result in BAM being targeted at the AdminServer. Installation Issues I had a few problems when I came to test everything in my mega-JVM. Following applications were not targeted and so I needed to target them at the AdminServer: b2bui composer Healthcare UI FMW Welcome Page Application (11.1.0.0.0) How Memory Efficient is It? On a Windows 2008R2 Server running under VirtualBox I was able to bring up both the 11gR2 database and SOA/BPM/BAM in 3G memory.  I allocated a minimum 512M to the PermGen and a minimum of 1.5G for the heap.  The setting from setSOADomainEnv are shown below: set DEFAULT_MEM_ARGS=-Xms1536m -Xmx2048m set PORT_MEM_ARGS=-Xms1536m -Xmx2048m set DEFAULT_MEM_ARGS=%DEFAULT_MEM_ARGS% -XX:PermSize=512m -XX:MaxPermSize=768m set PORT_MEM_ARGS=%PORT_MEM_ARGS% -XX:PermSize=512m -XX:MaxPermSize=768m I arrived at these numbers by monitoring JVM memory usage in JConsole. Task Manager showed total system memory usage at 2.9G – just below the 3G I allocated to the VM. Performance is not stellar but it runs and I could run JDeveloper alongside it on my 8G laptop, so in that sense it was a result!

  Read the article

• SOA Suite 11g Releases

  - by antony.reynolds

  A few years ago Mars renamed one of the most popular chocolate bars in England from Marathon to Snickers.  Even today there are still some people confused by the name change and refer to them as marathons. Well last week we released SOA Suite 11.1.1.3 and BPM Suite 11.1.1.3 as well as OSB 11.1.1.3.  Seems that some people are a little confused by the naming and how to install these new versions, probably the same Brits who call Snickers a Marathon :-).  Seems that calling all the revisions 11g Release 1 has caused confusion.  To help these people I have created a little diagram to show how you can get the latest version onto your machine.  The dotted lines indicate dependencies. Note that SOA Suite 11.1.1.3 and BPM 11.1.1.3 are provided as a patch that is applied to SOA Suite 11.1.1.2.  For a new install there is no need to run the 11.1.1.2 RCU, you can run the 11.1.1.3 RCU directly. All SOA & BPM Suite 11g installations are built on a WebLogic Server base.  The WebLogic 11g Release 1 version is 10.3 with an additional number indicating the revision.  Similarly the 11g Release 1 SOA Suite, Service Bus and BPM Suite have a version 11.1.1 with an additional number indicating the revision.  The final revision number should match the final revision in the WebLogic Server version.  The products are also sometimes identified by a Patch Set number, indicating whether this is the 11gR1 product with the first or second patch set.  The table below show the different revisions with their alias. Product Version Base WebLogic Alias SOA Suite 11gR1 11.1.1.1 10.3.1 Release 1 or R1 SOA Suite 11gR1 11.1.1.2 10.3.2 Patch Set 1 or PS1 SOA Suite 11gR1 11.1.1.3 10.3.3 Patch Set 2 or PS2 BPM Suite 11gR1 11.1.1.3 10.3.3 Release 1 or R1 OSB 11gR1 11.1.1.3 10.3.3 Release 1 or R1 Hope this helps some people, if you find it useful you could always send me a Marathon bar, sorry Snickers!

  Read the article

• OpenWorld Day 1

  - by Antony Reynolds

  A Day in the Life of an OpenWorld Attendee Part I Lots of people are blogging insightfully about OpenWorld so I thought I would provide some non-insightful remarks to buck the trend! With 50,000 attendees I didn’t expect to bump into too many people I knew, boy was I wrong!  I walked into the registration area and immediately was hailed by a couple of customers I had worked with a few months ago.  Moving to the employee registration area in a different hall I bumped into a colleague from the UK who was also registering.  As soon as I got my badge I bumped into a friend from Ireland!  So maybe OpenWorld isn’t so big after all! First port of call was Larrys Keynote.  As always Larry was provocative and thought provoking.  His key points were announcing the Oracle cloud offering in IaaS, PaaS and SaaS, pointing out that Fusion Apps are cloud enabled and finally announcing the 12c Database, making a big play of its new multi-tenancy features.  His contention was that multi-tenancy will simplify cloud development and provide better security by providing DB level isolation for applications and customers. Next day, Monday, was my first full day at OpenWorld.  The first session I attended was on monitoring of OSB, very interesting presentation on the benefits achieved by an Illinois area telco – US Cellular.  Great discussion of why they bought the SOA Management Packs and the benefits they are already seeing from their investment in terms of improved provisioning and time to market, as well as better performance insight and assistance with capacity planning. Craig Blitz provided a nice walkthrough of where Coherence has been and where it is going. Last night I attended the BOF on Managed File Transfer where Dave Berry replayed Oracles thoughts on providing dedicated Managed File Transfer as part of the 12c SOA release.  Dave laid out the perceived requirements and solicited feedback from the audience on what if anything was missing.  He also demoed an early version of the functionality that would simplify setting up MFT in SOA Suite and make tracking activity much easier. So much for Day 1.  I also ran into scores of old friends and colleagues and had a pleasant dinner with my friend from Ireland where I caught up on the latest news from Oracle UK.  Not bad for Day 1!

  Read the article

• Unable to install on a Samsung 305v5a

  - by Antony

  Have used Ubuntu for years now. Bought a Samsung 305v5a-so2 laptop yesterday. It runs an AMD A8 quadcore. I have a CD of 10.04 and as I am not clear about whether to install 32 or 64 bit I thought I would run the trial of ubuntu from the cd to see it. After about 30m started getting Authentification Failure messages. Squashfs-error Unable to read fragment cash entry Then a zillion Buffer Logical error messages like 17,000+ Should I go download 11.10, in 32bit or go and try the 64bit. Really don't want to screw the new laptop already but aint gonna wanna work with w7 either. Thanks for any help

  Read the article

• Free WebLogic Administration Cookbook

  - by Antony Reynolds

  Free WebLogic Admin Cookbook Packt Publishing are offering free copies of Oracle WebLogic Server 12c Advanced Administration Cookbook : http://www.packtpub.com/oracle-weblogic-server-12c-advanced-administration-cookbook/book  in exchange for a review either on your blog or on the title’s Amazon page. Here’s the blurb: Install, create and configure WebLogic Server Configure an Administration Server with high availability Create and configure JDBC data sources, multi data sources and gridlink data sources Tune the multi data source to survive database failures Setup JMS distributed queues Use WLDF to send threshold notifications Configure WebLogic Server for stability and resilience If you’re a datacenter operator, system administrator or even a Java developer this book could be exactly what you are looking for to take you one step further with Oracle WebLogic Server, this is a good way to bag yourself a free cookbook (current retail price $25.49). Free review copies are available until Tuesday 2nd July 2013, so if you are interested, email Harleen Kaur Bagga at: harleenb-AT-packtpub.com. I will be posting my own review shortly!

  Read the article

• A Virtual Dilemma

  - by antony.reynolds

  Solving a Gotcha with VirtualBox Guest Additions I was just building a new virtual machine based off an existing image that didn’t have the Virtual Box Guest Additions enabled.  The guest additions allow tight integration between the guest OS and the host environment, providing seemless mouse transfer and the ability to take advantage of full video screen size.  The guest additions need to be linked with the kernel which requires the kernel-devel package to be installed.  After installing this package and then trying to add the guest additions it failed, suggesting that I might not have the kernel-devel package that I had installed.  After a little though I finally realized what had happened.  When I grabbed the kernel-devel package I hadn’t checked the version of my kernel.  The kernel-devel I downloaded didn’t match the revision of the kernel I was running!  Hence my problems.  I upgraded the kernel to the same revision as my kernel-devel package and rebooted.  I had installed dkms so I was pleased to see that my VBox Additions successfully built and the mouse and screen now worked as expected. So now you know my embarrassing story for the day :-)

  Read the article

• Open World Day 2

  - by Antony Reynolds

  A Day in the Life of an Oracle OpenWorld Attendee Part III My second full day started with me waking up and realising that I was supposed to meet my friend Tejas Joshi (co-author of the Oracle Exalogic Elastic Cloud Handbook) at the station in 20 minutes!  Needless to say I didn’t make it, but then I felt better later when I found out he had caught the wrong shuttle bus and ended up at the airport instead of the BART! The morning was spent in the Authors Seminar arranged to give authors a whirlwind tour of Oracle Product updates and strategy plans.  It was useful to see what was happening in areas I knew little or nothing about.  In the afternoon I wandered around Java One, a very different show to OpenWorld with much more bleeding edge stuff and just plain blue sky thinking.  Of course who couldn’t love a show with a full size Duke wondering around and available for photographs. Attended a presentation on a highly available Weblogic JMS environment wich did a great job of laying out to architect a highly available solution. Dinner with customers and then collapsed exhausted into bed!

  Read the article

• Slicing the EDG

  - by Antony Reynolds

  Different SOA Domain Configurations In this blog entry I would like to introduce three different configurations for a SOA environment.  I have omitted load balancers and OTD/OHS as they introduce a whole new round of discussion.  For each possible deployment architecture I have identified some of the advantages. Super Domain This is a single EDG style domain for everything needed for SOA/OSB.   It extends the standard EDG slightly but otherwise assumes a single “super” domain. This is basically the SOA EDG.  I have broken out JMS servers and Coherence servers to improve scalability and reduce dependencies. Key Points Separate JMS allows those servers to be kept up separately from rest of SOA Domain, allowing JMS clients to post messages even if rest of domain is unavailable. JMS servers are only used to host application specific JMS destinations, SOA/OSB JMS destinations remain in relevant SOA/OSB managed servers. Separate Coherence servers allow OSB cache to be offloaded from OSB servers. Use of Coherence by other components as a shared infrastructure data grid service. Coherence cluster may be managed by WLS but more likely run as a standalone Coherence cluster. Benefits Single Administration Point (1 Admin Server) Closely follows EDG with addition of application specific JMS servers and standalone Coherence servers for OSB caching and application specific caches. Coherence grid can be scaled independent of OSB/SOA. JMS queues provide for inter-application communication. Drawbacks Patching is an all or nothing affair. Startup time for SOA may be slow if large number of composites deployed. Multiple Domains This extends the EDG into multiple domains, allowing separate management and update of these domains.  I see this type of configuration quite often with customers, although some don't have OWSM, others don't have separate Coherence etc. SOA & BAM are kept in the same domain as little benefit is obtained by separating them. Key Points Separate JMS allows those servers to be kept up separately from rest of SOA Domain, allowing JMS clients to post messages even if other domains are unavailable. JMS servers are only used to host application specific JMS destinations, SOA/OSB JMS destinations remain in relevant SOA/OSB managed servers. Separate Coherence servers allow OSB cache to be offloaded from OSB servers. Use of Coherence by other components as a shared infrastructure data grid service. Coherence cluster may be managed by WLS but more likely run as a standalone Coherence cluster. Benefits Follows EDG but in separate domains and with addition of application specific JMS servers and standalone Coherence servers for OSB caching and application specific caches. Coherence grid can be scaled independent of OSB/SOA. JMS queues provide for inter-application communication. Patch lifecycle of OSB/SOA/JMS are no longer lock stepped. JMS may be kept running independently of other domains allowing applications to insert messages fro later consumption by SOA/OSB. OSB may be kept running independent of other domains, allowing service virtualization to continue independent of other domains availability. All domains use same OWSM policy store (MDS-WSM). Drawbacks Multiple domains to manage and configure. Multiple Admin servers (single view requires use of Grid Control) Multiple Admin servers/WSM clusters waste resources. Additional homes needed to enjoy benefits of separate patching. Cross domain trust needs setting up to simplify cross domain interactions. Startup time for SOA may be slow if large number of composites deployed. Shared Service Environment This model extends the previous multiple domain arrangement to provide a true shared service environment.This extends the previous model by allowing multiple additional SOA domains and/or other domains to take advantage of the shared services.  Only one non-shared domain is shown, but there could be multiple, allowing groups of applications to share patching independent of other application groups. Key Points Separate JMS allows those servers to be kept up separately from rest of SOA Domain, allowing JMS clients to post messages even if other domains are unavailable. JMS servers are only used to host application specific JMS destinations, SOA/OSB JMS destinations remain in relevant SOA/OSB managed servers. Separate Coherence servers allow OSB cache to be offloaded from OSB servers. Use of Coherence by other components as a shared infrastructure data grid service Coherence cluster may be managed by WLS but more likely run as a standalone Coherence cluster. Shared SOA Domain hosts Human Workflow Tasks BAM Common "utility" composites Single OSB domain provides "Enterprise Service Bus" All domains use same OWSM policy store (MDS-WSM) Benefits Follows EDG but in separate domains and with addition of application specific JMS servers and standalone Coherence servers for OSB caching and application specific caches. Coherence grid can be scaled independent of OSB/SOA. JMS queues provide for inter-application communication. Patch lifecycle of OSB/SOA/JMS are no longer lock stepped. JMS may be kept running independently of other domains allowing applications to insert messages fro later consumption by SOA/OSB. OSB may be kept running independent of other domains, allowing service virtualization to continue independent of other domains availability. All domains use same OWSM policy store (MDS-WSM). Supports large numbers of deployed composites in multiple domains. Single URL for Human Workflow end users. Single URL for BAM end users. Drawbacks Multiple domains to manage and configure. Multiple Admin servers (single view requires use of Grid Control) Multiple Admin servers/WSM clusters waste resources. Additional homes needed to enjoy benefits of separate patching. Cross domain trust needs setting up to simplify cross domain interactions. Human Workflow needs to be specially configured to point to shared services domain. Summary The alternatives in this blog allow for patching to have different impacts, depending on the model chosen.  Each organization must decide the tradeoffs for itself.  One extreme is to go for the shared services model and have one domain per SOA application.  This requires a lot of administration of the multiple domains.  The other extreme is to have a single super domain.  This makes the entire enterprise susceptible to an outage at the same time due to patching or other domain level changes.  Hopefully this blog will help your organization choose the right model for you.

  Read the article

• SOA Suite 11g Developers Cookbook Published

  - by Antony Reynolds

  SOA Suite 11g Developers Cookbook Available Just realized that I failed to mention that Matt & mine’s most recent book, the SOA Suite 11g Developers Cookbook was published over Christmas last year! In some ways this was an easier book to write than the Developers Guide, the hard bit was deciding what recipes to include.  Once we had decided that the writing of the book was pretty straight forward. The book focuses on areas that we felt we had neglected in the Developers Guide, and so there is more about Java integration and OSB, both of which we see a lot of questions about when working with customers. Amazon has a couple of reviews. Table of Contents Chapter 1: Building an SOA Suite ClusterChapter 2: Using the Metadata Service to Share XML ArtifactsChapter 3: Working with TransactionsChapter 4: Mapping DataChapter 5: Composite Messaging PatternsChapter 6: OSB Messaging PatternsChapter 7: Integrating OSB with JSONChapter 8: Compressed File Adapter PatternsChapter 9: Integrating Java with SOA SuiteChapter 10: Securing Composites and Calling Secure Web ServicesChapter 11: Configuring the Identity ServiceChapter 12: Configuring OSB to Use Foreign JMS QueuesChapter 13: Monitoring and Management

  Read the article

• Oracle SOA Suite 11g Administrator's Handbook

  - by Antony Reynolds

  SOA Administration Book I have just received a copy of the “Oracle SOA Suite 11g Administrator's Handbook” so as soon as I have read it I will let you know what I think.  In the meantime the first thing that struck me was the author credentials, although I have never met either of them as I remember, I have read Admeds blog postings and they are a great community resource, so immediately I am well disposed towards the book.  Similarly Arun is an employee of my friend and co-author Matt Wright, and I have heard good things about him from Rubicon Red people. A first glance at the table of contents looks encouraging, I particularly like their approach to performance tuning where they give a clear concise explanation of the knobs they are using. More when I have read more.

  Read the article

• Open World Day 4

  - by Antony Reynolds

  A Day in the Life of an OpenWorld Attendee Part V Last day at OpenWorld.  The exhibits are closed, and the final few presentations are being given.  I spent much of the day meeting with customers to talk about SOA/OSB and Coherence.  Main event of the day was the farewell party which was loud and surprisingly well attended.  I was able to have lunch with Dave Felcey, Coherence PM, who has a great blog and is always ready to share his expertise with people. So that was OpenWOrld for another year.  I met a friend of a friend who attends OpenWorld every year and attends the Demo Grounds with a list of questions to ask people.  I think that illustrates the point that everyone approaches OpenWorld in a different way and looks to get different things from it.  For me OpenWorld is a great experience to feel the energy in Oracle and network with customers and partners.  Hope to see you there next year!

  Read the article

• LINQ to Twitter Queries with LINQPad

  - by Joe Mayo

  LINQPad is a popular utility for .NET developers who use LINQ a lot.  In addition to standard SQL queries, LINQPad also supports other types of LINQ providers, including LINQ to Twitter.  The following sections explain how to set up LINQPad for making queries with LINQ to Twitter. LINQPad comes in a couple versions and this example uses LINQPad4, which runs on the .NET Framework 4.0. 1. The first thing you'll need to do is set up a reference to the LinqToTwitter.dll. From the Query menu, select query properties. Click the Browse button and find the LinqToTwitter.dll binary. You should see something similar to the Query Properties window below. 2. While you have the query properties window open, add the namespace for the LINQ to Twitter types.  Click the Additional Namespace Imports tab and type in LinqToTwitter. The results are shown below: 3. The default query type, when you first start LINQPad, is C# Expression, but you'll need to change this to support multiple statements.  Change the Language dropdown, on the Main window, to C# Statements. 4. To query LINQ to Twitter, instantiate a TwitterContext, by typing the following into the LINQPad Query window: var ctx = new TwitterContext(); Note: If you're getting syntax errors, go back and make sure you did steps #2 and #3 properly. 5. Next, add a query, but don't materialize it, like this: var tweets = from tweet in ctx.Status where tweet.Type == StatusType.Public select new { tweet.Text, tweet.Geo, tweet.User }; 6. Next, you want the output to be displayed in the LINQPad grid, so do a Dump, like this: tweets.Dump(); The following image shows the final results:   That was an unauthenticated query, but you can also perform authenticated queries with LINQ to Twitter's support of OAuth.  Here's an example that uses the PinAuthorizer (type this into the LINQPad Query window): var auth = new PinAuthorizer { Credentials = new InMemoryCredentials { ConsumerKey = "", ConsumerSecret = "" }, UseCompression = true, GoToTwitterAuthorization = pageLink => Process.Start(pageLink), GetPin = () => { // this executes after user authorizes, which begins with the call to auth.Authorize() below. Console.WriteLine("\nAfter you authorize this application, Twitter will give you a 7-digit PIN Number.\n"); Console.Write("Enter the PIN number here: "); return Console.ReadLine(); } }; // start the authorization process (launches Twitter authorization page). auth.Authorize(); var ctx = new TwitterContext(auth, "https://api.twitter.com/1/", "https://search.twitter.com/"); var tweets = from tweet in ctx.Status where tweet.Type == StatusType.Public select new { tweet.Text, tweet.Geo, tweet.User }; tweets.Dump(); This code is very similar to what you'll find in the LINQ to Twitter downloadable source code solution, in the LinqToTwitterDemo project.  For obvious reasons, I changed the value assigned to ConsumerKey and ConsumerSecret, which you'll have to obtain by visiting http://dev.twitter.com and registering your application. One tip, you'll probably want to make this easier on yourself by creating your own DLL that encapsulates all of the OAuth logic and then call a method or property on you custom class that returns a fully functioning TwitterContext.  This will help avoid adding all this code every time you want to make a query. Now, you know how to set up LINQPad for LINQ to Twitter, perform unauthenticated queries, and perform queries with OAuth. Joe

  Read the article

• Comments on Comments

  - by Joe Mayo

  I almost tweeted a reply to Capar Kleijne's question about comments on Twitter, but realized that my opinion exceeded 140 characters. The following is based upon my experience with extremes and approaches that I find useful in code comments. There are a couple extremes that I've seen and reasons why people go the distance in each approach. The most common extreme is no comments in the code at all.  A few bad reasons why this happens is because a developer is in a hurry, sloppy, or is interested in job preservation. The unfortunate result is that the code is difficult to understand and hard to maintain. The drawbacks to no comments in code are a primary reason why teachers drill the need for commenting code into our heads.  This viewpoint assumes the lack of comments are bad because the code is bad, but there is another reason for not commenting that is gaining more popularity. I've heard/and read that code should be self documenting. Following this thought pattern, if code is well written with meaningful names, there should not be a reason for comments.  An addendum to this argument is that comments are often neglected and get out-of-date, but the code is what is kept up-to-date. Presumably, if code contained very good naming, it would be easy to maintain.  This is a noble perspective and I like the practice of meaningful naming of identifiers. However, I think it's also an extreme approach that doesn't cover important cases.  i.e. If an identifier is named badly (subjective differences in opinion) or not changed appropriately during maintenance, then the badly named identifier is no more useful than a stale comment. These were the two no-comment extremes, so let's look at the too many comments extreme. On a regular basis, I'll see cases where the code is over-commented; not nearly as often as the no-comment scenarios, but still prevalent.  These are examples of where every single line in the code is commented.  These comments make the code harder to read because they get in the way of the algorithm.  In most cases, the comments parrot what each line of code does.  If a developer understands the language, then most statements are immediately intuitive.  i.e. what use is it to say that I'm assigning foo to bar when it's clear what the code is doing. I think that over-commenting code is a waste of time that slows down initial development and maintenance.  Understandably, the developer's intentions are admirable because they've had it beaten into their heads that they must comment. However, I think it's an extreme and prefer a more moderate approach. I don't think the extremes do justice to code because each can make maintenance harder.  No comments on bad code is obviously a problem, but the other two extremes are subtle and require qualification to address properly. The problem I see with the code-as-documentation approach is that it doesn't lift the developer out of the algorithm to identify dependencies, intentions, and hacks. Any developer can read code and follow an algorithm, but they still need to know where it fits into the big picture of the application. Because of indirections with language features like interfaces, delegates, and virtual members, code can become complex.  Occasionally, it's useful to point out a nuance or reason why a piece of code is there. i.e. If you've building an app that communicates via HTTP, you'll have certain headers to include for the endpoint, and it could be useful to point out why the code for setting those header values is there and how they affect the application. An argument against this could be that you should extract that code into a separate method with a meaningful name to describe the scenario.  My problem with such an approach would be that your code base becomes even more difficult to navigate and work with because you have all of this extra code just to make the code more meaningful. My opinion is that a simple and well-stated comment stating the reasons and intention for the code is more natural and convenient to the initial developer and maintainer.  I just don't agree with the approach of going out of the way to avoid making a comment.  I'm also concerned that some developers would take this approach as an excuse to not comment their bad code. Another area where I like comments is on documentation comments.  Java has it and so does C# and VB.  It's convenient because we can build automated tools that extract these comments.  These extracted comments are often much better than no documentation at all.  The "go read the code" answer always doesn't fulfill the need for a quick summary of an API. To summarize, I think that the extremes of no comments and too many comments are less than desirable approaches. I prefer documentation comments to explain each class and member (API level) and code comments as necessary to supplement well-written code. Joe

  Read the article

• PASS Summit 2010 Recap

  - by AjarnMark

  Last week I attended my eighth PASS Summit in nine years, and every year it is a fantastic event!  I was fortunate my first year to have a contact (Bill Graziano (blog | Twitter) from SQLTeam) that I was expecting to meet, and who got me started on a good track of making new contacts.  Each year I have made a few more, and renewed friendships from years past.  Many of the attendees agree that the pure networking opportunities are one of the best benefits of attending the Summit.  And there’s a lot of great technical stuff, too, some of the things that stick out for me this year include… Pre-Con Monday: PowerShell with Allen White (blog | Twitter).  This was the first time that I attended a pre-con.  For those not familiar with the concept, the regular sessions for the conference are 75-90 minutes long.  For an extra fee, you can attend a full-day session on a single topic during a pre- or post-conference training day.  I had been meaning for several months to dive in and learn PowerShell, but just never seemed to find (or make) the time for it, so when I saw this was one of the all-day sessions, and I was planning to be there on Monday anyway, I decided to go for it.  And it was well worth it!  I definitely came out of there with a good foundation to build my own PowerShell scripts, plus several sample scripts that he showed which already cover the first four or five things I was planning to do with PowerShell anyway.  This looks like the right tool for me to build an automated version of our software deployment process, which right now contains many repeated steps.  Thanks Allen! Service Broker with Denny Cherry (blog | Twitter).  I remembered reading Denny’s blog post on Using Service Broker instead of Replication, and ever since then I have been thinking about using this to populate a new reporting-focused Data Repository that we will be building in the near future.  When I saw he was doing this session, I thought it would be great to get more information and be able to ask the author questions.  When I brought this idea back to my boss, he really liked it, as we had previously been discussing doing nightly data loads, with an option to manually trigger a mid-day load if up-to-the-minute data was needed for something.  If we go the Service Broker route, we can keep the Repository current in near real-time.  Hooray! DBA Mythbusters with Paul Randal (blog | Twitter).  Even though I read every one of the posts in Paul’s blog series of the same name, I had to go see the legend in person.  It was great, and I still learned something new! How to Conduct Effective Meetings with Joe Webb (blog | Twitter).  I always like to sit in on a session that Joe does.  I met Joe several years ago when both he and Bill Graziano were on the PASS Board of Directors together, and we have kept in touch.  Joe is very well-spoken and has great experience with both SQL Server and business.  And we could certainly use some pointers at my work (probably yours, too) on making our meetings more effective and to run on-time.  Of course, now that I’m the Chapter Leader for the Professional Development virtual chapter, I also had to sit in on this ProfDev session and recruit Joe to do a presentation or two for the chapter next year. Query Optimization with David DeWitt.  Anyone who has seen Dr. David DeWitt present the 3rd keynote at a PASS Summit over the last three years knows what a great time it is to sit and listen to him make some really complicated and advanced topic easy to understand (although it still makes your head hurt).  It still amazes me that the simple two-table join query from pubs that he used in his example can possibly have 22 million possible physical query plans.  Ouch! Exhibit Hall:  This year I spent more serious time in the exhibit hall than any year past.  I have talked my boss into making a significant (for us) investment in monitoring tools next year, and this was a great opportunity to talk with all the big-hitters.  Readers of mine may recall that I fell in love with the SQL Sentry Power Suite several months ago and wrote a blog entry about it just from the trial version.  Well as things turned out, short-term budget priorities shifted, and we weren’t able to make the purchase then.  I have it in the budget for next year, but since I was going to the Summit, my boss wanted me to look at the other options to see if this was really the one that we wanted.  I spent a couple of hours talking with representatives from Red-Gate, Idera, Confio, and Quest about their offerings, and giving them each the same 3 scenarios that I wanted to be able to accomplish based on the questions and issues that arise in our company.  It was interesting to discover the different approaches or “world view” that each vendor takes to the subject of performance monitoring and troubleshooting.  I may write a separate article that goes into this in more depth, but the product that best aligned with our point of view, and met the current needs we have is still the SQL Sentry Power Suite.  I’m not saying that the others are bad or wrong or anything like that, just that the way they tackled the issue did not align as well with our particular needs as does SQL Sentry’s product.  And that was something I learned too, when you go shopping for these products, you really need to know what you want to get from them.  It’s best if you have a few example scenarios from work that you can use to test out how well each tool fits your particular needs. Overall, another GREAT event.  I can’t wait to get the DVDs so I can sit in on a bunch of other sessions that I couldn’t get to because I was in one of the ones above.  And I can hardly wait until next year!

  Read the article

• Is it Hard to Write a Blog?

  - by Joe Mayo

  Responding to a tweet I received, asking if I found it hard to write a blog and keep it interesting. This is one of the situations where a 140 character response doesn’t do a question justice. There’s a lot to think about between the subjects of writing, subject matter, and entertainment.  Here’s my take on each of these three topics: There’s all types of writing you can do with various degrees of difficulty. If you’re writing a book and you have a gazillion editors bleeding over your every utterance, then the task becomes harder because you’re second-guessing yourself, not knowing whose opinion will be violated. However, if you’re communicating in a public forum, not too many people care about the grammar as much as whether what you have to say is correct.  For a blog, I would say it’s somewhere in-between.  Right now, I’m using Windows Live Writer, which gives me a few advantages to just typing into the blog editor, such as spelling correction and the ability to save my work and resume later.  Overall, writing is one of those things that you just need to get used to.  It’s an essential skill for developers because you need to document your work, depending on what your definition of proper documentation is, and communicate with other developers via various communications mediums. Not begin good (or not thinking that you’re good) shouldn’t hold you back.  Like most things in life, practice will improve your skill.  So, push away that inner voice that keeps you from moving forward and just do it. A good grasp on the subject matter you’re writing about helps.  However, don’t let a lack of knowledge stop you from writing about something. I recall reading something a while back by a developer who didn’t know a technology but wrote about their experience in learning it. They ended up learning more by expressing their thoughts in writing. If you look around out many blogs today, there are many items written by developers learning what they’re writing about.  So, whether you are sure or unsure, you can still write – just be honest with yourself and your readers about what you’re writing. Also, don’t be afraid to have a different opinion or worry if someone will disagree.  I’ll freely admit that it took a while for me to become accustomed to being criticized. Take the good with the bad and use the bad to make yourself better. Guaranteed, someone will disagree with one or more parts of what I’ve written here or think they have a better approach. No problem, more power to them, and whatever constructive comments they have will be a benefit to me in the future; Otherwise, to h*ll with them. :)  Every time you get knocked down, get right back up, dust the dirt off your backside, and keep moving forward.  You’ll learn in time how to align a subject with your own presentation of the material. Entertainment could be hard or could be natural, depending on the personality of yourself and your target audience. It’s even more challenging because you can say something you think is funny and someone will be offended. In fact, there are a lot of things that you shouldn’t say in the name of a joke, but I won’t mention any of them here for want of not offending anyone. Of course, I probably offended someone by saying that and there is probably an organization somewhere in the world out to get me now. I’m probably not the best person to be giving you advice on entertaining an audience.  I mean, every time I try to tell a joke on Twitter 10 people unfriend me. Okay, maybe 15, but you get my point. One thing you might be interested in knowing is that it’s not too hard for one technical person to entertain other technical people, especially when the subject is of interest.  It’s the excitement in each sentence and passion in each paragraph that will keep another developer entertained and interested in what you have to say. Not everyone will like what you’ve written, but the important part is to find your own voice and it’s likely that there is one person in some corner of the world that likes what you have to say, even if it’s your mom and she doesn’t understand a single word you write. :)   If I could leave you with one final thought; Just do it and don’t let anyone or anything hold you back.   Joe

  Read the article

• A Gentle Introduction to NuGet

  - by Joe Mayo

  Not too long ago, Microsoft released, NuGet, an automated package manager for Visual Studio.  NuGet makes it easy to download and install assemblies, and their references, into a Visual Studio project.  These assemblies, which I loosely refer to as packages, are often open source, and include projects such as LINQ to Twitter. In this post, I'll explain how to get started in using NuGet with your projects to include: installng NuGet, installing/uninstalling LINQ to Twitter via console command, and installing/uninstalling LINQ to Twitter via graphical reference menu. Installing NuGet The first step you'll need to take is to install NuGet.  Visit the NuGet site, at http://nuget.org/, click on the Install NuGet button, and download the NuGet.Tools.vsix installation file, shown below. Each browser is different (i.e. FireFox, Chrome, IE, etc), so you might see options to run right away, save to a location, or access to the file through the browser's download manager.  Regardless of how you receive the NuGet installer, execute the downloaded NuGet.Tools.vsix to install Nuget into visual Studio. The NuGet Footprint When you open visual Studio, observe that there is a new menu option on the Tools menu, titled Library Package Manager; This is where you use NuGet.  There are two menu options, from the Library Package Manager Menu that you can use: Package Manager Console and Package Manager Settings.  I won't discuss Package Manager Settings in this post, except to give you a general idea that, as one of a set of capabilities, it manages the path to the NuGet server, which is already set for you. Another menu, added by the NuGet installer, is Add Library Package Reference, found by opening the context menu for either a Solution Explorer project or a project's References folder or via the Project menu.  I'll discuss how to use this later in the post. The following discussion is concerned with the other menu option, Package Manager Console, which allows you to manage NuGet packages. Gettng a NuGet Package Selecting Tools -> Library Package Manager -> Package Manager Console opens the Package Manager Console.  As you can see, below, the Package Manager Console is text-based and you'll need to type in commands to work with packages. In this post, I'll explain how to use the Package Manager Console to install LINQ to Twitter, but there are many more commands, explained in the NuGet Package Manager Console Commands documentation.  To install LINQ to Twitter, open your current project where you want LINQ to Twitter installed, and type the following at the PM> prompt: Install-Package linqtotwitter If all works well, you'll receive a confirmation message, similar to the following, after a brief pause: Successfully installed 'linqtotwitter 2.0.20'. Successfully added 'linqtotwitter 2.0.20' to NuGetInstall. Also, observe that a reference to the LinqToTwitter.dll assembly was added to your current project. Uninstalling a NuGet Package I won't be so bold as to assume that you would only want to use LINQ to Twitter because there are other Twitter libraries available; I recommend Twitterizer if you don't care for LINQ to Twitter.  So, you might want to use the following command at the PM> prompt to remove LINQ to Twitter from your project: Uninstall-Package linqtotwitter After a brief pause, you'll see a confirmation message similar to the following: Successfully removed 'linqtotwitter 2.0.20' from NuGetInstall. Also, observe that the LinqToTwitter.dll assembly no longer appears in your project references list. Sometimes using the Package Manager Console is required for more sophisticated scenarios.  However, LINQ to Twitter doesn't have any dependencies and is a very simple install, so you can use another method of installing graphically, which I'll show you next. Graphical Installations As explained earlier, clicking Add Library Package Reference, from the context menu for either a Solution Explorer project or a project's References folder or via the Project menu opens the Add Library Package Reference window. This window will allow you to add a reference a NuGet package in your project. To the left of the window are a few accordian folders to help you find packages that are either on-line or already installed.  Just like the previous section, I'll assume you are installing LINQ to Twitter for the first time, so you would select the Online folder and click All.  After waiting for package descriptions to download, you'll notice that there are too many to scroll through in a short period of time, over 900 as I write this.  Therefore, use the search box located at the top right corner of the window and type LINQ to Twitter as I've done in the previous figure. You'll see LINQ to Twitter appear in the list. Click the Install button on the LINQ to Twitter entry. If the installation was successful, you'll see a message box display and disappear quickly (or maybe not if your machine is very fast or you blink at that moment). Then you'll see a reference to the LinqToTwitter.dll assembly in your project's references list. Note: While running this demo, I ran into an issue where VS had created a file lock on an installation folder without releasing it, causing an error with "packagename already exists. Skipping..." and then an error describing that it couldn't write to a destination folder.  I resolved the problem by closing and reopening VS. If you open the Add a Library Package Reference window again, you'll see LINQ to Twitter listed in the Recent packages folder. Summary You can install NuGet via the on-line home page with a click of a button.  Nuget provides two ways to work with packages, via console or graphical window.  While the graphical window is easiest, the console window is more powerful. You can now quickly add project references to many available packages via the NuGet service. Joe

  Read the article

• JustCode Provides Reflector Alternative

  - by Joe Mayo

  If you've been a loyal Reflector user, you've probably been exposed to the debacle surrounding RedGate's decision to no longer offer a free version.  Since then, the race has begun for a replacement with a provider that would stand by their promises to the community.  Mono has an ongoing free alternative, which has been available for a long time.  However, other vendors are stepping up to the plate, with their own offerings. If Not Reflector, Then What? One of these vendors is Telerik.  In their recent Q1 2011 release of JustCode, Telerik offers a decompilation utility rivaling what we've become accustomed to in Reflector.  Not only does Telerik offer a usable replacement, but they've (in my opinion), produced a product that integrates more naturally with visual Studio than any other product ever has.  Telerik's decompilation process is so easy that the accompanying demo in this post is blindingly short (except for the presence of verbose narrative). If you want to follow along with this demo, you'll need to have Telerik JustCode installed.  If you don't have JustCode yet, you can buy it or download a trial at the Telerik Web site . A Tall Tale; Prove It! With JustCode, you can view code in the .NET Framework or any other 3rd party library (that isn't well obfuscated).  This demo depends on LINQ to Twitter, which you can download from CodePlex.com and create a reference or install the package online as described in my previous post on NuGet.  Regardless of the method, you'll have a project with a reference to LINQ to Twitter.  Use a Console Project if you want to follow along with this demo. Note:  If you've created a Console project, remember to ensure that the Target Framework is set to .NET Framework 4.  The default is .NET Framework 4 Client Profile, which doesn't work with LINQ to Twitter.  You can check by double-clicking the Properties folder on the project and inspecting the Target Framework setting. Next, you'll need to add some code to your program that you want to inspect. Here, I add code to instantiate a TwitterContext, which is like a LINQ to SQL DataContext, but works with Twitter: var l2tCtx = new TwitterContext(); If you're following along add the code above to the Main method, which will look similar to this: using LinqToTwitter; namespace NuGetInstall { class Program { static void Main(string[] args) { var l2tCtx = new TwitterContext(); } } } The code above doesn't really do anything, but it does give something that I can show and demonstrate how JustCode decompilation works. Once the code is in place, click on TwitterContext and press the F12 (Go to Definition) key.  As expected, Visual Studio opens a metadata file with prototypes for the TwitterContext class.  Here's the result: Opening a metadata file is the normal way that Visual Studio works when navigating to the definition of a type where you don't have the code.  The scenario with TwitterContext happens because you don't have the source code to the file.  Visual Studio has always done this and you can experiment by selecting any .NET type, i.e. a string type, and observing that Visual Studio opens a metadata file for the .NET String type. The point I'm making here is that JustCode works the way Visual Studio works and you'll see how this can make your job easier. In the previous figure, you only saw prototypes associated with the code. i.e. Notice that the default constructor is empty.  Again, this is normal because Visual Studio doesn't have the ability to decompile code.  However, that's the purpose of this post; showing you how JustCode fills that gap. To decompile code, right click on TwitterContext in the metadata file and select JustCode Navigate -> Decompile from the context menu.  The shortcut keys are Ctrl+1.  After a brief pause, accompanied by a progress window, you'll see the metadata expand into full decompiled code. Notice below how the default constructor now has code as opposed to the empty member prototype in the original metadata: And Why is This So Different? Again, the big deal is that Telerik JustCode decompilation works in harmony with the way that Visual Studio works.  The navigate to functionality already exists and you can use that, along with a simple context menu option (or shortcut key) to transform prototypes into decompiled code. Telerik is filling the the Reflector/Red Gate gap by providing a supported alternative to decompiling code.  Many people, including myself, used Reflector to decompile code when we were stuck with buggy libraries or insufficient documentation.  Now we have an alternative that's officially supported by a company with an excellent track record for customer (developer) service, Telerik.  Not only that, JustCode has several other IDE productivity tools that make the deal even sweeter. Joe

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >