Search Results

Search found 19018 results on 761 pages for 'basic disk'.

Page 4/761 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • ddrescue a non-solaris disk gets I/O error

    - by rleir
    I am trying to get a disk image of a SCSI disk using ddrescue on Solaris10 (Sparc). The disk is non-solaris, and ddrescue gets an immediate I/O error (as does dd). I used format to label the disk as Solaris, and now ddrescue reads it fine. Is there any way to get the image without labelling the disk as Solaris?

    Read the article

  • Cloned partition not seen correctly by disk utility & gparted

    - by enrico
    Some days ago I cloned my /dev/sda1 partition with clonezilla in partition-to-partition mode to /dev/sda3. It worked, but now that I've finished the setup of system in /dev/sda3, I wanna reinstall /dev/sda1 for other stuffs. This partition is NOT mounted, but ubuntu's DISK UTILITY thinks it is, while it doesn't see as mounted the currently active / partition /dev/sda3. This is the df- TH output : Filesystem Type Size Used Avail Use% Mounted on /dev/sda3 ext4 32G 6.2G 24G 21% / udev devtmpfs 2.2G 13k 2.2G 1% /dev tmpfs tmpfs 845M 906k 844M 1% /run none tmpfs 5.3M 0 5.3M 0% /run/lock none tmpfs 2.2G 115k 2.2G 1% /run/shm /dev/sdb1 fuseblk 321G 147G 174G 46% /Dati Gparted instead, sees /dev/sda1 as NOT mounted (checked with Information option), but it display the BOOT flag on this partition, while the real booted partition /dev/sda3, hasn't it. If I try to format the /dev/sda1 partition, it gives me this error : GParted 0.8.1 --enable-libparted-dmraid Libparted 2.3 Format /dev/sda1 as ext2 00:00:02 ( ERROR ) calibrate /dev/sda1 00:00:00 ( SUCCESS ) path: /dev/sda1 start: 2048 end: 62500863 size: 62498816 (29.80 GiB) set partition type on /dev/sda1 00:00:02 ( SUCCESS ) new partition type: ext2 create new ext2 file system 00:00:00 ( ERROR ) mkfs.ext2 -L "" /dev/sda1 mke2fs 1.41.14 (22-Dec-2010) /dev/sda1 is mounted; will not make a filesystem here! How is possible to correct this behaviour ? Is this due to some lacking option in clonezilla phase ? TIA Enrico

    Read the article

  • Disk Space Full

    - by Loki
    Setting up Ubuntu 10.04 server, the / disk space shows full under df, however the du does not show any of the space used. This has several mounts to Gluster FS'. I have tried a forced FSCK and to no avail. ~# df -h Filesystem Size Used Avail Use% Mounted on /dev/md0 141G 132G 0 100% / none 3.0G 224K 3.0G 1% /dev none 3.0G 0 3.0G 0% /dev/shm none 3.0G 76K 3.0G 1% /var/run none 3.0G 0 3.0G 0% /var/lock none 3.0G 0 3.0G 0% /lib/init/rw /dev/sdb1 9.0T 7.1T 1.9T 80% /brick1 /dev/sdb2 9.0T 7.9T 1.1T 88% /brick2 localhost:/sanvol09 385T 330T 56T 86% /mnt/sanvol09 <- Gluster FS uses local software to contact the DFS I've attempted a tune2fs and same issue arises # du -h --max-depth=1 --one-file-system / 4.0K /selinux 0 /proc 47M /boot 31M /mnt 8.0K /brick1 8.0K /brick2 391M /lib 4.0K /opt 7.4M /bin 0 /sys 379M /var 5.6M /etc 16K /lost+found 43M /root 4.0K /srv 5.7M /home 4.0K /media 7.0M /sbin 0 /dev 4.0K /tmp 4.0K /cdrom 631M /usr 1.6G / more info # df -ih Filesystem Inodes IUsed IFree IUse% Mounted on /dev/md0 9.0M 91K 8.9M 1% / none 746K 770 745K 1% /dev none 747K 1 747K 1% /dev/shm none 747K 32 747K 1% /var/run none 747K 1 747K 1% /var/lock none 747K 3 747K 1% /lib/init/rw /dev/sdb1 583M 1.8M 581M 1% /brick1 /dev/sdb2 583M 1.9M 581M 1% /brick2 localhost:/sanvol09 25G 76M 25G 1% /mnt/sanvol09 The final question: df show's 100% used, and its not, any other known fixes?

    Read the article

  • Cloning a failing disk (Win 7)

    - by daveh551
    I have a Windows 7 machine with several partitions on a 1.5T drive. Windows has been complaining about disk errors and imminent failure, so I have purchased a new 2TB drive. The failing disk has not completely failed, and, in fact, I was able to boot Windows from it (after a couple tries) and examine the SMART logs - the only RED item was 1 sector being reallocated. But when I try to Clone it to the new Drive using Acronis True Image Home (2010), True Image can see the drive, the partitions, and the contents, but when it goes to actually do the clone, it says "Failed to move. Make sure the destination disk is not smaller than the source disk, and that there are not errors on the disk" (or something like that). What are some other options for simply cloning the failing drive. I'd like to clone the entire disk, but am willing to do it partition by partition if necessary. Was this a known failing of the 2010 edition of ATI, or is it really something hosed in my system. Would upgrading to the 2012 edition be likely to work any better? (I'd download the trial and try it out, but if I remember right, the cloning operation is disabled in the trial version), and I don't have enough free disk space to make an entire image.) What are some other cloning software packages if ATI won't work? Note that I'm only looking to clone the disk, not make an image as a back up - I use Ghost for that, and can fall back to that if I have to. It looks to me like CloneZilla would do the job. Any recommendations? Thanks, and if this duplicates other questions, I apologize.

    Read the article

  • Recovering from apt-get upgrade gone wrong due to a full disk

    - by Peter
    I was performing an apt-get upgrade on an Ubuntu 12.04.5 LTS box that hadn't been updated in a little while and the upgrade failed due to 'No space left on device'. After a little while I worked out space meant inodes and I have freed some up but unfortunately things have been left something askew. I have tried manually installing the old versions of packages mentioned using dpkg -i but that doesn't help. I have tried apt-get upgrade and apt-get -f install to no avail. Results are below. Any ideas how to fix things up? FIXED: Installing the earlier versions again manually via dpkg -i and then apt-get -f install has done the trick. Not sure why this didn't work the first time. The packages in question are listed below but they will presumably vary. libssl1.0.0_1.0.1-4ubuntu5.14_i386.deb linux-headers-3.2.0-64-generic-pae_3.2.0-64.97_i386.deb linux-image-generic-pae_3.2.0.64.76_i386.deb linux-headers-3.2.0-64_3.2.0-64.97_all.deb linux-headers-generic-pae_3.2.0.64.76_i386.deb root@unlinked:/tmp# apt-get upgrade Reading package lists... Done Building dependency tree Reading state information... Done You might want to run ‘apt-get -f install’ to correct these. The following packages have unmet dependencies. libssl-dev : Depends: libssl1.0.0 (= 1.0.1-4ubuntu5.14) but 1.0.1-4ubuntu5.17 is installed linux-generic-pae : Depends: linux-image-generic-pae (= 3.2.0.64.76) but 3.2.0.67.79 is installed Depends: linux-headers-generic-pae (= 3.2.0.64.76) but 3.2.0.67.79 is installed E: Unmet dependencies. Try using -f. root@unlinked:/tmp# apt-get -f install Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following packages were automatically installed and are no longer required: linux-headers-3.2.0-43-generic-pae linux-headers-3.2.0-38-generic-pae linux-headers-3.2.0-41-generic-pae linux-headers-3.2.0-36-generic-pae linux-headers-3.2.0-63-generic-pae linux-headers-3.2.0-58-generic-pae linux-headers-3.2.0-60-generic-pae linux-headers-3.2.0-55-generic-pae linux-headers-3.2.0-40 linux-headers-3.2.0-41 linux-headers-3.2.0-36 linux-headers-3.2.0-37 linux-headers-3.2.0-43 linux-headers-3.2.0-38 linux-headers-3.2.0-44 linux-headers-3.2.0-39 linux-headers-3.2.0-45 linux-headers-3.2.0-51 linux-headers-3.2.0-52 linux-headers-3.2.0-53 linux-headers-3.2.0-48 linux-headers-3.2.0-54 linux-headers-3.2.0-60 linux-headers-3.2.0-55 linux-headers-3.2.0-61 linux-headers-3.2.0-56 linux-headers-3.2.0-57 linux-headers-3.2.0-63 linux-headers-3.2.0-58 linux-headers-3.2.0-59 linux-headers-3.2.0-52-generic-pae linux-headers-3.2.0-44-generic-pae linux-headers-3.2.0-39-generic-pae linux-headers-3.2.0-37-generic-pae linux-headers-3.2.0-59-generic-pae linux-headers-3.2.0-61-generic-pae linux-headers-3.2.0-56-generic-pae linux-headers-3.2.0-53-generic-pae linux-headers-3.2.0-48-generic-pae linux-headers-3.2.0-45-generic-pae linux-headers-3.2.0-40-generic-pae linux-headers-3.2.0-57-generic-pae linux-headers-3.2.0-54-generic-pae linux-headers-3.2.0-51-generic-pae Use 'apt-get autoremove' to remove them. The following extra packages will be installed: libssl-dev linux-generic-pae The following packages will be upgraded: libssl-dev linux-generic-pae 2 to upgrade, 0 to newly install, 0 to remove and 0 not to upgrade. 2 not fully installed or removed. Need to get 0 B/1,427 kB of archives. After this operation, 1,024 B of additional disk space will be used. Do you want to continue [Y/n]? y dpkg: dependency problems prevent configuration of libssl-dev: libssl-dev depends on libssl1.0.0 (= 1.0.1-4ubuntu5.14); however: Version of libssl1.0.0 on system is 1.0.1-4ubuntu5.17. dpkg: error processing libssl-dev (--configure): dependency problems - leaving unconfigured No apport report written because the error message indicates it's a follow-up error from a previous failure. dpkg: dependency problems prevent configuration of linux-generic-pae: linux-generic-pae depends on linux-image-generic-pae (= 3.2.0.64.76); however: Version of linux-image-generic-pae on system is 3.2.0.67.79. linux-generic-pae depends on linux-headers-generic-pae (= 3.2.0.64.76); however: Version of linux-headers-generic-pae on system is 3.2.0.67.79. dpkg: error processing linux-generic-pae (--configure): dependency problems - leaving unconfigured No apport report written because the error message indicates it's a follow-up error from a previous failure. Errors were encountered while processing: libssl-dev linux-generic-pae E: Sub-process /usr/bin/dpkg returned an error code (1)

    Read the article

  • Time machine disk icon on boot disk

    - by Ben Lings
    The icon for Macintosh HD (my boot disk) shows as a Time Machine disk. There is a file .com.apple.timemachine.supported in the root of the disk. If I delete the file and restart the computer, the icon goes back to a normal HD icon. However, the .com.apple.timemachine.supported file is recreated at some point on boot because when I log in again, the file has been recreated. If then reboot again, the icon goes back to being a Time Machine one. Any ideas about what is creating this file and why? More importantly - how can I get it to stop? It looks like something thinks the boot disk should be a Time Machine volume, but what? Console.app shows the following messages at approximately hourly intervals: 19/01/2010 19:23:54 /System/Library/CoreServices/backupd[7459] Starting standard backup 19/01/2010 19:23:54 /System/Library/CoreServices/backupd[7459] Cookie file is not readable or does not exist at path: /.<12 hex digits of MAC address for en0> 19/01/2010 19:23:54 /System/Library/CoreServices/backupd[7459] Volume at path / does not appear to be the correct backup volume for this computer. (Cookies do not match) 19/01/2010 19:23:59 /System/Library/CoreServices/backupd[7459] Backup failed with error: 18 Other possibly relevant information: The boot HD isn't the original - the original failed so this is a SuperDuper'd clone of the original drive. I used to use the same disk for a SuperDuper clone as for Time Machine. These are the same same symptoms as this and this.

    Read the article

  • Use hard disk image like a regular hard disk on Linux

    - by jobnoorman
    If you have a hard disk image (including partition table, multiple partitions,...), is it possible to let Linux treat it as a regular hard disk? By "regular hard disk" I mean I would like to have the image show up as, for instance, /dev/hdx and its partitions as /dev/hdx1,... (I know I can mount one of the partitions in the image using "mount -o loop,offset=x ..." but I don't really like this option.)

    Read the article

  • Lost disk space in Windows 7, cannot find the missing

    - by Tsanders
    My hard drive is complaining it is low on disk space, but a strange thing seems to be happening: Explorer reports 10Gb of available space (on a 120 Gb hard disk), chkdsk in the command prompt does the same but if I use a disk space tool such as SpaceSniffer or WinDirStat, only 50Gb of data is found. My guess is that there somehow is a hold on a large block of disk space (but that's just a guess) because of a prior very large (40 Gb) download attempt that didn't complete. There isn't 40Gb of files on the drive (hidden or visible), yet Explorer insists that something is there. How can I claim back this hard disk drive (without formatting my hard disk)? SpaceMonger is providing a clue, reporting four unscannable folders which add up to 43Gb: C:\RRBackups C:\System Volume Information C:\Windows\Csc\v2.06 C:\Windows\System32\LogFiles\Wmi\RtBackup Does anybody know what these folders are for, and how I can claim back at least some space? Restore point claims about 4Gb, so that doesn't seem to be the main problem.

    Read the article

  • Proper use of disk to disk to tape backup using de-duplication and LTO5

    - by Michael
    I currently have ~12TB of data for a full disk to tape (LTO3) backup. Needless to say, it's now requiring over 16 tapes so I'm looking at other solutions. Here is what I've come up with. I'd like to hear the community's thoughts. Server for Disk-to-Disk BackupExec 2010 Using De-duplication Technology 20+TB worth of SATA drives LTO5 robotic library connected via SAS 1Gbps NIC connected to network What I envision is doing a full backup of my entire network which will initially take a long time over the 1Gbps NIC but once the de-duplication kicks in backups should be quick. I will then use the LTO5 to make disk to tape backups and archive those accordingly. What does everyone think? Any faster way of doing the initial full backup over the 1Gbps NIC? What will be my pain points? Is there a better way of doing what I'm trying to achieve?

    Read the article

  • Dual boot - disk partition issues basic vs dynamic disk

    - by dboyd68
    I have a lenovo X1 that I am looking to dual boot windows and ubuntu on. I am having an issue. The disk came with 4 partitions SYSTEM_DRV, Windows C:, Lenovov Recovery, Hibernate Partition I have a SSD (250 gb) I have shrunk Windows C: so that I have 100gb of unallocated space. My plan was to install ubuntu on that. But when I try to create a new partition to install ubuntu on. Windows is saying I have to convert to a dynamic disk. I don't really understand the difference between Dyanimc and Basic disk but a quick search I am assuming I dont want to do this as I boot from this disk? Any suggestions on what I can do to dual boot? Thanks

    Read the article

  • Connect a 2.5" (laptop hard disk) SATA hard disk to Desktop PC

    - by Lawliet
    Can I connect a laptop SATA hard disk to Desktop PC? Do I have to use some adapters or I can just plug in SATA power connector and SATA data cable like my Desktop hard disk is connected? I noticed that both laptop and desktop SATA disks use same connectors, but I'm afraid that I might fry my laptop hard disk because the SATA connector has both 12V and 5V voltage (given the fact that laptop hard disks has input voltage of 5V) I bought a all-in-one Modex-to-SATA power adapter and SATA cable and I still don't know what to do. I have read various forums and a lot of people are stating that it's perfectly ok, but some are scaring me that by connecting it so, it fried their hard disk. And some also mentioned cutting the yellow 12V wire if I'm planning to use Modex-to-SATA power. Thanks in advance

    Read the article

  • Connect a 2.5" (laptop hard disk) SATA hard disk to Desktop PC

    - by Lawliet
    Can I connect a laptop SATA hard disk to Desktop PC? Do I have to use some adapters or I can just plug in SATA power connector and SATA data cable like my Desktop hard disk is connected? I noticed that both laptop and desktop SATA disks use same connectors, but I'm afraid that I might fry my laptop hard disk because the SATA connector has both 12V and 5V voltage (given the fact that laptop hard disks has input voltage of 5V) I bought a all-in-one Modex-to-SATA power adapter and SATA cable and I still don't know what to do. I have read various forums and a lot of people are stating that it's perfectly ok, but some are scaring me that by connecting it so, it fried their hard disk. And some also mentioned cutting the yellow 12V wire if I'm planning to use Modex-to-SATA power. Thanks in advance

    Read the article

  • Virtualbox - differencing disk based on different differencing disk

    - by Klinki
    I'm trying to create differencing image based on differencing image in VirtualBox 4.2.18. Official documentation says it should be possible: http://www.virtualbox.org/manual/ch05.html#diffimages Basically I want to achieve this drive hierarchy: + immutable image with Debian and all software installed +---- differencing image with specific configuration, autoreset=off, readonly +-------- differencing image with autoreset=on +---- another differencing image for different virtual machine +-------- differencing image with autoreset=on I successfully created differencing image based on differencing image, but I'm not able to connect it to virtual machine :( It always shows error: Failed to open the hard disk .... cannot register hard disk ... because hard disk with UUID ... already exists Here is screenshot of Virtual Media Manager and error dialog Virtual Media Manager Window screenshot Very strange is that the new differencing image (tempdrive.vdi) doesn't have Actual Size 0. I wasn't able to connect it, but still, it has 36KB of data on it... This is very similar to this older question: How to create a chained differencing disk of another differencing disk in Virtual Box? but suggested solution is not working anymore in VirtualBox 4.2.18, so I posted it as a new question. (Limit for posting links and screenshots is quite annoying..)

    Read the article

  • Update fails to Install

    - by FirmTech
    I get the below error when I try to install updates using Software Updater: Not enough free disk space The upgrade needs a total of 81.3 M free space on disk '/boot'. Please free at least an additional 15.9 M of disk space on '/boot'. Empty your trash and remove temporary packages of former installations using 'sudo apt-get clean'. What should I do? firmtechnologies@FirmTechnologies:~$ (ls -l /boot) total 155801 -rw-r--r-- 1 root root 1158016 May 3 01:30 abi-3.13.0-24-generic -rw-r--r-- 1 root root 1161713 May 8 01:31 abi-3.13.0-26-generic -rw-r--r-- 1 root root 1161713 May 15 20:07 abi-3.13.0-27-generic -rw-r--r-- 1 root root 1161764 Jun 4 22:57 abi-3.13.0-29-generic -rw-r--r-- 1 root root 165510 May 3 01:30 config-3.13.0-24-generic -rw-r--r-- 1 root root 165538 May 8 01:31 config-3.13.0-26-generic -rw-r--r-- 1 root root 165521 May 15 20:07 config-3.13.0-27-generic -rw-r--r-- 1 root root 165544 Jun 4 22:57 config-3.13.0-29-generic drwxr-xr-x 5 root root 1024 Jun 6 14:31 grub -rw-r--r-- 1 root root 29091568 May 7 21:31 initrd.img-3.13.0-24-generic -rw-r--r-- 1 root root 29094684 May 12 12:24 initrd.img-3.13.0-26-generic -rw-r--r-- 1 root root 29095678 May 18 10:57 initrd.img-3.13.0-27-generic -rw-r--r-- 1 root root 29093700 Jun 6 14:32 initrd.img-3.13.0-29-generic drwx------ 2 root root 12288 Apr 30 17:11 lost+found -rw-r--r-- 1 root root 176500 Mar 12 13:31 memtest86+.bin -rw-r--r-- 1 root root 178176 Mar 12 13:31 memtest86+.elf -rw-r--r-- 1 root root 178680 Mar 12 13:31 memtest86+_multiboot.bin -rw------- 1 root root 3372643 May 3 01:30 System.map-3.13.0-24-generic -rw------- 1 root root 3377429 May 8 01:31 System.map-3.13.0-26-generic -rw------- 1 root root 3377429 May 15 20:07 System.map-3.13.0-27-generic -rw------- 1 root root 3378267 Jun 4 22:57 System.map-3.13.0-29-generic -rw------- 1 root root 5776416 May 3 01:30 vmlinuz-3.13.0-24-generic -rw------- 1 root root 5790912 May 8 01:30 vmlinuz-3.13.0-26-generic -rw------- 1 root root 5790912 May 15 20:07 vmlinuz-3.13.0-27-generic -rw------- 1 root root 5792544 Jun 4 22:57 vmlinuz-3.13.0-29-generic

    Read the article

  • Recover data from Dynamic Disk (MBR) bigger than 2TB

    - by Helder
    Here is the situation: Promise Array FastTrak TX4310 with 3 disks (750 GB each) in RAID5. This comes to around 1500 GB of data. Last week I had the idea of expanding the RAID with an additional 750 GB disk. This would bring the volume to around 2250 GB. I plugged the disk and used the Webpam software to do the RAID expansion. However, I didn't count with the MBR 2TB limit, as I didn't remembered that the disk was using MBR instead of GPT and I didn't check it prior to the expansion. After a couple of days of expansion, today when I got home, the disk in Windows disk manager showed the message "Invalid disk" and when I try to activate it, it says "The operation is not allowed on the Invalid pack". From what I figured, the logical volume on the RAID expanded, and passed that info to the Windows layer and I ended up with an "larger than 2TB" MBR disk. I'm hopping that somehow I can still recover some data from this, and I was wondering if I can "rewrite" the MBR structure back to the 1500 GB partition size, so I can access the partition in Windows. Right now I'm doing an "Analyse" with TestDisk, as I hope the program will pickup the old 1500 structure and allow me to somehow revert back to it. I think that even though the Logical Drive in the RAID is bigger than the 2TB, I can somehow correct the MBR to show the 1500 GB partition again. I had a similar problem once, and I was able to recover the data using a similar method. What do you guys think? Is it a dead end? Am I totally screwed because there is the extra RAID layer that I'm not counting? Or is there other way to move with this? Thanks all!

    Read the article

  • Out of disk space - /boot at 100%

    - by uvasal
    My /boot is at 100%. When I run aptitude search ~ilinux-image I'm getting loads of unused images. When I try to delete one of them (after checking which one is currently in use by doing uname -r), e.g apt-get autoremove linux-image-3.2.0-44-generic I get: Reading package lists... Done Building dependency tree Reading state information... Done You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies: linux-generic : Depends: linux-headers-generic (= 3.2.0.51.61) but 3.2.0.54.64 is to be installed linux-server : Depends: linux-headers-server (= 3.2.0.51.61) but 3.2.0.54.64 is to be installed E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). And running apt-get -f install throws No space left on device. I've also tried doing apt-get purge but I am getting the same thing. Output of df -h and dpkg -l linux-*.: root@hb2088:/srv/www# df -h Filesystem Size Used Avail Use% Mounted on /dev/sda3 9.4G 3.0G 6.0G 34% / udev 301M 4.0K 301M 1% /dev tmpfs 124M 228K 124M 1% /run none 5.0M 0 5.0M 0% /run/lock none 309M 0 309M 0% /run/shm /dev/sda1 92M 91M 0 100% /boot root@hb2088:/srv/www# dpkg -l linux-* Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ Name Version Description +++-====================================================-====================================================-======================================================================================================================== un linux-doc-3.2.0 <none> (no description available) ii linux-firmware 1.79.6 Firmware for Linux kernel drivers iU linux-generic 3.2.0.51.61 Complete Generic Linux kernel un linux-headers <none> (no description available) un linux-headers-3 <none> (no description available) un linux-headers-3.0 <none> (no description available) ii linux-headers-3.2.0-44 3.2.0-44.69 Header files related to Linux kernel version 3.2.0 ii linux-headers-3.2.0-44-generic 3.2.0-44.69 Linux kernel headers for version 3.2.0 on 64 bit x86 SMP ii linux-headers-3.2.0-45 3.2.0-45.70 Header files related to Linux kernel version 3.2.0 ii linux-headers-3.2.0-45-generic 3.2.0-45.70 Linux kernel headers for version 3.2.0 on 64 bit x86 SMP ii linux-headers-3.2.0-48 3.2.0-48.74 Header files related to Linux kernel version 3.2.0 ii linux-headers-3.2.0-48-generic 3.2.0-48.74 Linux kernel headers for version 3.2.0 on 64 bit x86 SMP ii linux-headers-3.2.0-51 3.2.0-51.77 Header files related to Linux kernel version 3.2.0 ii linux-headers-3.2.0-51-generic 3.2.0-51.77 Linux kernel headers for version 3.2.0 on 64 bit x86 SMP ii linux-headers-3.2.0-52 3.2.0-52.78 Header files related to Linux kernel version 3.2.0 ii linux-headers-3.2.0-52-generic 3.2.0-52.78 Linux kernel headers for version 3.2.0 on 64 bit x86 SMP iU linux-headers-3.2.0-54 3.2.0-54.82 Header files related to Linux kernel version 3.2.0 iU linux-headers-3.2.0-54-generic 3.2.0-54.82 Linux kernel headers for version 3.2.0 on 64 bit x86 SMP iU linux-headers-generic 3.2.0.54.64 Generic Linux kernel headers iU linux-headers-server 3.2.0.54.64 Linux kernel headers on Server Equipment. un linux-image <none> (no description available) un linux-image-3.0 <none> (no description available) ii linux-image-3.2.0-44-generic 3.2.0-44.69 Linux kernel image for version 3.2.0 on 64 bit x86 SMP ii linux-image-3.2.0-45-generic 3.2.0-45.70 Linux kernel image for version 3.2.0 on 64 bit x86 SMP ii linux-image-3.2.0-48-generic 3.2.0-48.74 Linux kernel image for version 3.2.0 on 64 bit x86 SMP iF linux-image-3.2.0-51-generic 3.2.0-51.77 Linux kernel image for version 3.2.0 on 64 bit x86 SMP iF linux-image-3.2.0-52-generic 3.2.0-52.78 Linux kernel image for version 3.2.0 on 64 bit x86 SMP in linux-image-3.2.0-54-generic <none> (no description available) iU linux-image-generic 3.2.0.51.61 Generic Linux kernel image iU linux-image-server 3.2.0.51.61 Linux kernel image on Server Equipment. un linux-initramfs-tool <none> (no description available) un linux-kernel-headers <none> (no description available) un linux-kernel-log-daemon <none> (no description available) ii linux-libc-dev 3.2.0-52.78 Linux Kernel Headers for development un linux-restricted-common <none> (no description available) iU linux-server 3.2.0.51.61 Complete Linux kernel on Server Equipment. un linux-source-3.2.0 <none> (no description available) un linux-tools <none> (no description available) Output of du -sh /boot/*: root@hb2088:~# du -sh /boot/* 781K /boot/abi-3.2.0-44-generic 781K /boot/abi-3.2.0-45-generic 781K /boot/abi-3.2.0-48-generic 781K /boot/abi-3.2.0-51-generic 781K /boot/abi-3.2.0-52-generic 139K /boot/config-3.2.0-44-generic 139K /boot/config-3.2.0-45-generic 139K /boot/config-3.2.0-48-generic 139K /boot/config-3.2.0-51-generic 139K /boot/config-3.2.0-52-generic 1.6M /boot/grub 14M /boot/initrd.img-3.2.0-44-generic 14M /boot/initrd.img-3.2.0-45-generic 14M /boot/initrd.img-3.2.0-48-generic 12K /boot/lost+found 174K /boot/memtest86+.bin 176K /boot/memtest86+_multiboot.bin 2.8M /boot/System.map-3.2.0-44-generic 2.8M /boot/System.map-3.2.0-45-generic 2.8M /boot/System.map-3.2.0-48-generic 2.8M /boot/System.map-3.2.0-51-generic 2.8M /boot/System.map-3.2.0-52-generic 4.8M /boot/vmlinuz-3.2.0-44-generic 4.8M /boot/vmlinuz-3.2.0-45-generic 4.8M /boot/vmlinuz-3.2.0-48-generic 4.8M /boot/vmlinuz-3.2.0-51-generic 4.8M /boot/vmlinuz-3.2.0-52-generic

    Read the article

  • Disk errors on tty and syslog/dmesg

    - by Shoaibi
    Recently I have started to get a lot of these errors: Jun 18 08:57:42 abacus kernel: [ 401.554292] ata5: SError: { HostInt 10B8B } Jun 18 08:57:42 abacus kernel: [ 401.559346] sr 4:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00 Jun 18 08:57:42 abacus kernel: [ 401.560191] ata5.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 Jun 18 08:57:42 abacus kernel: [ 401.560231] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) Jun 18 08:57:42 abacus kernel: [ 401.575310] ata5.00: status: { DRDY ERR } Jun 18 08:57:42 abacus kernel: [ 401.579801] ata5: hard resetting link Jun 18 08:57:42 abacus kernel: [ 401.929320] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Jun 18 08:57:42 abacus kernel: [ 401.941936] ata5.00: configured for UDMA/100 Jun 18 08:57:42 abacus kernel: [ 401.969426] ata5: EH complete Jun 18 08:57:54 abacus kernel: [ 413.527699] ata5.00: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x6 Jun 18 08:57:54 abacus kernel: [ 413.527779] ata5.00: irq_stat 0x40000001 Jun 18 08:57:54 abacus kernel: [ 413.527822] ata5: SError: { HostInt 10B8B } Jun 18 08:57:54 abacus kernel: [ 413.527901] sr 4:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00 Jun 18 08:57:54 abacus kernel: [ 413.528103] ata5.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 Jun 18 08:57:54 abacus kernel: [ 413.528142] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) Jun 18 08:57:54 abacus kernel: [ 413.528184] ata5.00: status: { DRDY ERR } Jun 18 08:57:54 abacus kernel: [ 413.528303] ata5: hard resetting link Jun 18 08:57:54 abacus kernel: [ 413.875894] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Jun 18 08:57:54 abacus kernel: [ 413.888267] ata5.00: configured for UDMA/100 Jun 18 08:57:54 abacus kernel: [ 413.916365] ata5: EH complete Jun 18 08:57:56 abacus kernel: [ 415.537834] ata5.00: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x6 Jun 18 08:57:56 abacus kernel: [ 415.545253] ata5.00: irq_stat 0x40000001 Jun 18 08:57:56 abacus kernel: [ 415.549788] ata5: SError: { HostInt 10B8B } Jun 18 08:57:56 abacus kernel: [ 415.554840] sr 4:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00 Jun 18 08:57:56 abacus kernel: [ 415.555201] ata5.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 Jun 18 08:57:56 abacus kernel: [ 415.555242] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) Jun 18 08:57:56 abacus kernel: [ 415.570483] ata5.00: status: { DRDY ERR } Jun 18 08:57:56 abacus kernel: [ 415.574695] ata5: hard resetting link Jun 18 08:57:56 abacus kernel: [ 415.924954] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Jun 18 08:57:56 abacus kernel: [ 415.936831] ata5.00: configured for UDMA/100 Jun 18 08:57:56 abacus kernel: [ 415.965001] ata5: EH complete Jun 18 08:58:02 abacus kernel: [ 421.529784] ata5.00: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x6 Jun 18 08:58:02 abacus kernel: [ 421.529904] ata5.00: irq_stat 0x40000001 Jun 18 08:58:02 abacus kernel: [ 421.530023] ata5: SError: { HostInt 10B8B } Jun 18 08:58:02 abacus kernel: [ 421.530104] sr 4:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00 Jun 18 08:58:02 abacus kernel: [ 421.530425] ata5.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 Jun 18 08:58:02 abacus kernel: [ 421.530466] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) Jun 18 08:58:02 abacus kernel: [ 421.530583] ata5.00: status: { DRDY ERR } Jun 18 08:58:02 abacus kernel: [ 421.530705] ata5: hard resetting link Jun 18 08:58:02 abacus kernel: [ 421.873218] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Jun 18 08:58:02 abacus kernel: [ 421.885040] ata5.00: configured for UDMA/100 Jun 18 08:58:02 abacus kernel: [ 421.913404] ata5: EH complete Are these critical error messages? What would be the cause and remedy?

    Read the article

  • unable to mount internal disk mount exited with exit code 13

    - by Masri
    My Ubuntu get into error when I try to mount one of my internal disks and it gives this error message: Error mounting: mount exited with exit code 13: $MFTMirr does not match $MFT (record 3). Failed to mount '/dev/sda7': Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more details. pls advise how to solve above error ,Many thanks to you in advance.

    Read the article

  • disk not accessible

    - by user107044
    i formatted my hard drive yesterday and it was working well even after the formatting. But when I restarted my system again , is is showing that the space is alloted to my files but they are inaccessible. I have even tried to unhide the files and folders, if they got hidden somehow. But nothing works. the hard drive is being shown empty but the properties are saying that it still conatins the data : http://imgur.com/ObjTE in the image, it is showing that the directory has only 1 file of size:4.8 kbps but the space being used by the drive is 11.6 GB. do suggest some solution.

    Read the article

  • Disk drive won't let go of password prompt at bootup?

    - by user54003
    I had a hacker intrude into my system, at the time it was obvious, so I reinstalled. However, I am left with what appears to be a fatal problem as far as one of my disk drives goes. When I install that drive in my system, a prompt comes up for the disk password, and what it is asking for is a root password. The disk works otherwise normally but despite all my efforts, I have not been able to fix this disk. I have gotten the operating system parted magic and done the most extreme clean up available, the internal one which sends a signal to the disk electronics which runs a built in clean up program. Darik's boot and nuke, I've tried them all but I can't seem to remove this with anything in the Linux line. Does anyone have any suggestions? I've run gparted, created a Sun, an Apple and various other schemes to partition the disk, all to no avail. Can anyone help?

    Read the article

  • Win 8: Adding a boot volume to an MBR dynamic disk [NOT about changing to basic disks]

    - by Stilez
    (This is NOT aiming to convert to basic disk. In this question, the disk stays dynamic but becomes bootable) There doesn't seem to be a clear, well stated answer I can find, for the question "What are the criteria for Windows 8 to successfully boot from an MBR dynamic disk", or "how do I fix a dynamic MBR partition that's failing boot"? I've tried to educate myself but can't find crucial information to clear it all up. My existing HDD/SSD setup: DISK 0 ~ 60GB SSD/MBR/basic: (350MB recovery)(60GB windows 8 bootable) DISK 1 ~ 512GB SSD/MBR/dynamic: (350MB recovery)(60GB unallocated)(410GB mirrored data) DISK 2 ~ 512GB SSD/MBR/dynamic: (350MB recovery)(60GB unallocated)(410GB mirrored data) DISKS 3, 4, 5: (ignored for simplicity: 2xHDD RAID1 + caching SSD) I'm heavy duty on data crunching and virtualisation, just maxxed out 32GB RAM @ 2133 and moved to 4960X + 64GB. Disk 0 is a pure system disk of little value, and virtualisations runs off mirrored SSDs (Samsung 840 Pro 512 x 2) for double speed reading and so they snapshot in reasonable time. I'm using 4 SATA3 ports and the board only has two decent Intel ports (onboard Marvell are poorer quality). I'm wary of choosing between LSI, HighPoint and other 3rd party controllers as I'm unfamiliar with the maze of decent RAID cards (that's a whole other issue!). I want to cut down my SSD needs by moving the boot volume and caching volume to the 840 pros, giving a setup with 2 fewer SSDs: DISK 0 ~ 512GB SSD/MBR/dynamic: (350MB recovery)(60GB boot)(410GB mirrored data) DISK 1 ~ 512GB SSD/MBR/dynamic: (350MB recovery)(30GB cache for the ICH10R mirror)(30GB temp)(410GB mirrored data) DISKS 2, 3: (2xHDD RAID1) Intel's RST allows this, Win 8 allows booting off a MBR/dynamic disk, and the two 60GB SSDs are hardly the fastest SSDs anyway, they'll get repurposed. Moving the caching volume is easy. Moving the boot volume has me stumped. The difficulty is, I'm hitting a wall of knowledge here. I have a UEFI Asus motherboard with an previous traditional MBR/basic boot disk, and I want it to boot from a disk and volume that's MBR/dynamic. The disk copy is physically ok (Partition Wizard Server will copy to dynamic volumes) but then hits a light blue 0xc000000e boot error. No real surprise, I expected to have some boot fixing, but had expected Windows to boot-fix it (all drivers exist), or the usual manual fixes to work. Specifically, I don't know enough, to know what's got to be manually checked and perhaps corrected for the disk to boot (legacy/uefi/bios, odd partitions, boot tables, disk IDs, hidden boot files, oh my!), or if I need to change any of this secure boot/UEFI/legacy stuff in the bios, convert a 512 SSD to basic and then back to dynamic when working, or if the issue is pure OS config using "diskpart", "bootsect" and "bootrec" from the Win8 DVD. The old system disk still boots but I don't know enough to figure what to fix, to make the system boot as I want. The answers probably aren't hard but the real issue is my confusion and missing information. Thanks for helping!

    Read the article

  • Hard disk with bad clusters

    - by Dan
    I have been trying to backup some files up to DVD recently, and the burn process failed saying the CRC check failed for certain files. I then tried to browse to these files in Windows explorer and my whole machine locks up and I have to reboot. I ran check disk without the '/F /R' arguments and it told me I had bad sectors. So I re-ran it with the arguments and check disk fails during the 'Chkdsk is verifying usn journal' stage with this error: Insufficient disk space to fix the usn journal $j data stream The hard disk is a 300GB Partition on a 400GB Disk, and there is 160GBs of free space on the partition. My os (Windows 7) is installed on the other partition and is running fine. Any idea how I fix this? or repair it enough to copy my files off it?

    Read the article

  • Cloning single disk drive to multiple drives simultaneously

    - by mr.b
    Hi, I am looking for a way to clone single disk drive to more than one disk drive at the same time. I have prepared system images on 1TB disks, and it takes almost 2 hours to clone one disk to another, and then it goes up exponentially, in order to have say 30 disks cloned. If it was possible to clone one disk to more than single target, it would simplify whole procedure a lot. Also, is there something that prevents this kind of operation? I mean, is there some special reason why every disk cloning software that I know about supports only single target drive? Thanks! P.S. This question is cross-post from superuser, I hope nobody minds.

    Read the article

  • zeroing a disk with dd vs Disk Utility

    - by jdizzle
    I'm attempting to zero a disk on my Mac OS X machine. I'm going for complete zeros and unformatted, so I think of dd. Unfortunately the maximum throughput I've managed to get out of dd is 7MB/s. Just for grins I tried disk utility and it has a throughput of 19MB/s. What gives? I've tried changing the bs option on dd to all sorts of values, but it still hovers around 7MB/s. Why is disk utility so much faster?

    Read the article

  • How to limit disk performance?

    - by DrakeES
    I am load-testing a web application and studying the impact of some config tweaks (related to disk i/o) on the overall app performance, i.e. the amount of users that can be handled simultaneously. But the problem is that I hit 100% CPU before I can see any effect of the disk-related config settings. I am therefore wondering if there is a way I could deliberately limit the disk performance so that it becomes the bottleneck and the tweaks I am trying to play with actually start impacting performance. Should I just make the hard disk busy with something else? What would serve the best for this purpose? More details (probably irrelevant, but anyway): PHP/Magento/Apache, studying the impact of apc.stat. Setting it to 0 makes APC not checking PHP scripts for modification which should increase performance where disk is the bottleneck. Using JMeter for benchmarking.

    Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >