Search Results

Search found 19701 results on 789 pages for 'disk images'.

Page 4/789 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Decrease in disk performance after partitioning and encryption, is this much of a drop normal?

    - by Biohazard
    I have a server that I only have remote access to. Earlier in the week I repartitioned the 2 disk raid as follows: Filesystem Size Used Avail Use% Mounted on /dev/mapper/sda1_crypt 363G 1.8G 343G 1% / tmpfs 2.0G 0 2.0G 0% /lib/init/rw udev 2.0G 140K 2.0G 1% /dev tmpfs 2.0G 0 2.0G 0% /dev/shm /dev/sda5 461M 26M 412M 6% /boot /dev/sda7 179G 8.6G 162G 6% /data The raid consists of 2 x 300gb SAS 15k disks. Prior to the changes I made, it was being used as a single unencrypted root parition and hdparm -t /dev/sda was giving readings around 240mb/s, which I still get if I do it now: /dev/sda: Timing buffered disk reads: 730 MB in 3.00 seconds = 243.06 MB/sec Since the repartition and encryption, I get the following on the separate partitions: Unencrypted /dev/sda7: /dev/sda7: Timing buffered disk reads: 540 MB in 3.00 seconds = 179.78 MB/sec Unencrypted /dev/sda5: /dev/sda5: Timing buffered disk reads: 476 MB in 2.55 seconds = 186.86 MB/sec Encrypted /dev/mapper/sda1_crypt: /dev/mapper/sda1_crypt: Timing buffered disk reads: 150 MB in 3.03 seconds = 49.54 MB/sec I expected a drop in performance on the encrypted partition, but not that much, but I didn't expect I would get a drop in performance on the other partitions at all. The other hardware in the server is: 2 x Quad Core Intel(R) Xeon(R) CPU E5405 @ 2.00GHz and 4gb RAM $ cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 32 Lun: 00 Vendor: DP Model: BACKPLANE Rev: 1.05 Type: Enclosure ANSI SCSI revision: 05 Host: scsi0 Channel: 02 Id: 00 Lun: 00 Vendor: DELL Model: PERC 6/i Rev: 1.11 Type: Direct-Access ANSI SCSI revision: 05 Host: scsi1 Channel: 00 Id: 00 Lun: 00 Vendor: HL-DT-ST Model: CD-ROM GCR-8240N Rev: 1.10 Type: CD-ROM ANSI SCSI revision: 05 I'm guessing this means the server has a PERC 6/i RAID controller? The encryption was done with default settings during debian 6 installation. I can't recall the exact specifics and am not sure how I go about finding them? Thanks

    Read the article

  • error while trying to resize the partition

    - by speedox
    im running out of space and i tried to resize the partition using g-parted but i got an error: Checking for bad sectors ... Bad cluster: 0x2904636 - 0x2904636 (1) Bad cluster: 0x290526d - 0x290526e (2) Bad cluster: 0x29052fd - 0x2905300 (4) Bad cluster: 0x2905392 - 0x2905392 (1) Bad cluster: 0x2905425 - 0x2905428 (4) Bad cluster: 0x290555d - 0x2905560 (4) Bad cluster: 0x29055f1 - 0x29055f8 (8) Bad cluster: 0x2905681 - 0x2905688 (8) Bad cluster: 0x29057ac - 0x29057ac (1) Bad cluster: 0x29887dd - 0x29887dd (1) Bad cluster: 0x299a086 - 0x299a086 (1) Bad cluster: 0x348ec05 - 0x348ec05 (1) Bad cluster: 0x353dabb - 0x353dabb (1) Bad cluster: 0x353dba4 - 0x353dba4 (1) Bad cluster: 0x354a162 - 0x354a162 (1) Bad cluster: 0x354a1ce - 0x354a1ce (1) ERROR: This software has detected that the disk has at least 40 bad sectors. **************************************************************************** * WARNING: The disk has bad sector. This means physical damage on the disk * * surface caused by deterioration, manufacturing faults or other reason. * * The reliability of the disk may stay stable or degrade fast. We suggest * * making a full backup urgently by running 'ntfsclone --rescue ...' then * * run 'chkdsk /f /r' on Windows and rebooot it TWICE! Then you can resize * * NTFS safely by additionally using the --bad-sectors option of ntfsresize.* **************************************************************************** I opened the "disk utility" and clicked on "Smart DATA" button I got this image:

    Read the article

  • System checks for disk drive error every time it boots

    - by Starx
    When my disk space for the ubuntu installation partition was getting low, from a live cd, I used gparted to increase its volume capacity, but deleting another partition and merging it to the ubuntu partition. Since then onwards, I am receiving disk checking for errors at boot screen for my partitions, always. What seem to be causing this and how to fix it? Update Here is my boot.log if it provides few insight fsck from util-linux 2.19.1 fsck from util-linux 2.19.1 /dev/sda1 was not cleanly unmounted, check forced. ubuntu: clean, 501325/1310720 files, 2958455/5242880 blocks /dev/sda1: 241/51272 files (3.3% non-contiguous), 73541/102400 blocks mountall: fsck /boot [358] terminated with status 1 Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox ... /dev/sda1 is a separate grub partition for my dual OS's

    Read the article

  • Reverse Search Images Easily with the TinEye Client for Windows

    - by Asian Angel
    Are you a frequent user of TinEye and would like to integrate it into your favorite Windows system? Then get ready to enjoy Context Menu and App Window goodness with the TinEye Client for Windows. After you have downloaded the zip file, unzip it and run the setup file inside. Once the installation process has finished you will be asked if you would like to launch TinEye Client immediately or not. If not then you can access it later using the new shortcut added to the Start Menu. We chose to let the program launch automatically…this is what the main window looks like. For our test we decided to access the client via the Context Menu using a picture of Doc Brown’s DeLorean in hover conversion mode. HTG Explains: Understanding Routers, Switches, and Network Hardware How to Use Offline Files in Windows to Cache Your Networked Files Offline How to See What Web Sites Your Computer is Secretly Connecting To

    Read the article

  • SMART Status Data Interpretation - Disk Utility

    - by Mah
    Last week my external harddisk (Seagate Barracuda 1.5TB in a custom enclosure) showed signs of failure (Disk Utility SMART Pre-failure status - several bad sectors) and I decided to change it. I bought a new HDD (Seagate Barracuda 2TB) and connected it to my Ubuntu box with a SATA to USB cable that could not report SMART status. I copied all the contents of the old HDD to the new HDD (one partition with rsync, the other with parted cp) and then gently replaced the old HDD with the new one inside my aluminum enclosure. For obscure reasons after reconnecting the new HDD through the old enclosure, the Linux box could not detect my partitions. I recovered the partitions with testdisk and restarted the computer. After the restart I checked the SMART status of the new HDD an I get this: Read Error Rate --------------- Normalized 108 Worst 99 Threshold 6 Value 16737944 I got a high value on the Seek Error Rate as well. Wondering why this happens I copied 2 GB directory from one partition to the other and rechecked the SMART status (5 minutes later). This time I got the following: Read Error Rate --------------- Normalized 109 Worst 99 Threshold 6 Value 24792504 As you see there has been an increase in the error rate. I am unable to interpret these numbers. Is my new hard disk already dying? What are the acceptable values in these fields for Seagate hard disks? Then why the assessment is still good? While I could get temperature and airflow temperature data from my old HDD, I can not fetch them for the new one. I noticed that my old hdd had got really hot sometimes. Is it possible that the enclosure is killing the harddisks due to high temperature?... Thanks

    Read the article

  • Updating to linux-image-3.2.0-26-generic occupies all disk space

    - by user42228
    I just ran a normal update through the update manager that wanted to update me to linux-image-3.2.0-26-generic. The installation paused halfway with a message that the root was full. I checked the disk usage, and noticed that one of the newly installed files: /lib/modules/3.2.0-26-generic/modules.ccwmap took up 63GB(!). Compared to the previous version: /lib/modules/3.2.0-24-generic/modules.ccwmap that took up only 4KB it seems like something went awfully wrong! As mentioned the update was paused when i ran out of disk space. There is no option in the update dialog to cancel or perform rollback on the update. Is it asking for trouble to kill the update manager? Any ideas as to what went wrong, and what I can do to remedy it? It's only minimal how much space I can free on that partition (without deleting the above mentioned file). If it is any help, the update was paused after this: Examining /etc/kernel/postinst.d. run-parts: executing /etc/kernel/postinst.d/dkms 3.2.0-26-generic /boot/vmlinuz-3.2.0-26-generic

    Read the article

  • Macbook won't read disk

    - by Gracie
    I have a macbook that I erased the original iOS on to restart with Ubuntu but when I put in my home burned disk it doesn't read it correctly and makes loud clicking noises. I burned it on a TDK CD-R80 700 MB CD from Windows 7 and even did the confirm to make sure it burned correctly. It has never read CDs like that before, so it's weird. Should I just make another CD? Or is there something wrong with the Macbook.

    Read the article

  • SOS, i erased a disk,1T.by mistake

    - by gabriel
    i tried to make bootable a flash drive from the startup disk creator, and i wanted to copy an iso of the 11.10 ubuntu, and when i tried to erase the flash drive i pressed erase on another removable drive 1T storage by mistake, VVVery very very quickly less than one second and with no warning everything was erased i suppose.Is that thing possible?When i tried before theis to erase the flash drive it took around a minute to erase the 8GB.But now less than a second for 1T? Please help, Gabriel

    Read the article

  • Downloading error "Could not retrieve the required disk image "

    - by Freed Ahmad
    When I try to download Ubuntu 12.04 using the Windows installer (Wubi) through a proxy server which requires proxy authentication, after I choose the Ubuntu installation size, username and password, when I click the Install button, I get this error: An error occurred: Could not retrieve the required disk image files For more information, please see the log file: c:\users\(myusername)\appdata\local\temp\wubi-12.04-rev266.log The log file says: proxy authentication error How can I solve this problem?

    Read the article

  • Images from remote source - is it possible or is really a bad practice?

    - by user1620696
    I'm building a management system for websites and I had an idea related to image galleries that I'm not sure it's a good approach. Since images might need good deals of space depending on how much images a user uploads an so on, I thought on using cloud services like dropbox, mega and google drive to store images and load then when needed. The obvious problem is that for me this seems a useless solution because it would be slow to download the images from the remote source, making the user experience not so good. Is there any way to save images of a image gallery on remote source without getting the user experience bad because of speed? Or this is really not a good practice?

    Read the article

  • How to use qcow2 disk image in Linux?

    - by sauparna
    I have a large qcow2 formatted disk image, which I use as storage. Often I need to move data to and from this disk image. I mount the disk using the qemu-nbd tool as follows: modprobe nbd max_part=63 qemu-nbd -c /dev/nbd0 /host/disk100G.img mount /dev/nbd0p1 /home/rup/disk But disk access fails every now and then in the midst of some I/O operation with an "Input/output error". At that point I have to manually unmount the disk and re-mount it so that I can run the program again: qemu-nbd -d /dev/nbd0 umount joborkhaki/ What could be the reason for this? Is there a better tool that I can use to maintain a qcow2 disk image?

    Read the article

  • Can I have both Windows dynamic disk partition and some other non-Windows partition on the same disk?

    - by haimg
    When a basic Windows disk is converted to dynamic, Windows creates a partition that span the whole disk with the type of "Windows LVM" and manages its dynamic partitions within this space. So even if there is still free space on this disk, it is not visible to any other OS besides Windows. This happens with MBR and GPT disks both. I would like to share a Windows dynamic disk with some other OS. I have to have dynamic disks because I use Windows SoftRaid (mirrors). So, my questions are: Is there any way to "force" Windows to take up less then the whole disk when it converts a basic disk to dynamic? Will Windows tolerate having some other non-Windows partition on its dynamic disk?

    Read the article

  • moving dynamic disk from Windows to another Windows computer when original Windows is not available

    - by Andrei
    How do I mount dynamic disk on new system without access to the old OS ? I need to move Dynamic data disk from old Windows XP (Pro, SP3) system, where disk crashed, to new Windows system without having access to the old OS. On new system, Dynamic disk shows as "Dynamic - Foreign". Microfoft has instructions for moving Dynamic Disk [1]. But Microsoft assumes having access to the old system. But I do not have acess to the old system. I am struck with "Dynamic - Foreign" static of the disk on new system. Thanks WinXP Pro SP3 [1] http://technet.microsoft.com/en-us/library/cc779854(WS.10).aspx Move Disk to another computer.

    Read the article

  • Where can I get Windows XP Images for WMware Workstation

    - by Saif Bechan
    Does anyone know where I can get windows images for vmware. I know Microsoft gives away the images for Virtual PC. These images work pretty well, but when I try to import them in VMware I need to activate the copies again, because the virtual hardware they use is just to different. I want Images of different versions of windows 2000, xp, vista. Does anyone where I can download them, or do I need to build them from CD.

    Read the article

  • Transfer disk image to larger/smaller disk

    - by forthrin
    I need to switch the hard drive on a 2006 iMac to a new SSD. I don't have the original installation CDs. I know I can order CDs from Apple, but this costs money. Someone told me it's possible to rip the image of the old drive and transfer to the new drive. If so, does the size of the new drive have to be exactly the same as the old? If not, my questions are: Is it possible to "stretch" the image from 120 MB disk to a 256 MB disk (numbers are examples)? If so, what is the command line for this? Likewise, is it possible to "shrink" an image from a larger disk (eg. 256 MB) to a smaller disk (eg. 120 MB), provided that the actual space used on the disk does not exceed 120 MB? How do you do this on the command line?

    Read the article

  • I want to reformat my external hard disk but disk utility said it could not be unmounted

    - by Faith
    Hi I wanted to reformat my HP 500GB hard disk to MS DOS (FAT) by using Disk Utility but Disk Utility kept saying that the hard disk cannot be unmounted. I tried googling it but nothing seems to answer my question. I'm not trying to reformat the hard disk in my Mac but my external hard disk! I usually format my hard disks to clear the documents I no longer need. And I'll change it to ExFat but currently, whenever I plug in my hard disk on Windows, the whole system just hangs there. Can someone help??

    Read the article

  • Thunderbird 16.0.1 filling disk space

    - by Kris
    I'm on Ubuntu 12.04 with Thunderbird 16.0.1 and Kernel 3.6.0-030600rc4-generic. I used Thunderbird for quite a while and never had any problems with it. But now it seems to fill up my disk space very fast: watch -n 1 df -h . so Ubuntu started giving out warnings. First I removed some files but not much later it had filled up around 600 MB. It eats around 50 MB/min while I just download 10 emails or so via IMAP. This behaviour is new and seems to be some kind of bug. I don't want to delete my old mails, so what else could I do?

    Read the article

  • Investigate disk writes further to find out which process writes to my SSD

    - by zuba
    I try to minimize disk writes to my new SSD system drive. I'm stuck with iostat output: ~ > iostat -d 10 /dev/sdb Linux 2.6.32-44-generic (Pluto) 13.11.2012 _i686_ (2 CPU) Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sdb 8,60 212,67 119,45 21010156 11800488 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sdb 3,00 0,00 40,00 0 400 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sdb 1,70 0,00 18,40 0 184 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sdb 1,20 0,00 28,80 0 288 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sdb 2,20 0,00 32,80 0 328 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sdb 1,20 0,00 23,20 0 232 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sdb 3,40 19,20 42,40 192 424 As I see there are writes to sdb. How can I resolve which process writes? I know about iotop, but it doesn't show which filesystem is being accessed.

    Read the article

  • external disk dont work on ubuntu

    - by Skirki
    i have problem with in my ubuntu: when i connect external imation apollo disc i dont see a file system. Disk is working because in windows OS on this same computer it works as well. when i typed dmesg i got following logs [12913.260078] usb 4-1: new low speed USB device using ohci_hcd and address 15 [12913.440072] usb 4-1: device descriptor read/64, error -62 [12913.730058] usb 4-1: device descriptor read/64, error -62 [12914.020085] usb 4-1: new low speed USB device using ohci_hcd and address 16 [12914.200082] usb 4-1: device descriptor read/64, error -62 [12914.490150] usb 4-1: device descriptor read/64, error -62 [12914.780064] usb 4-1: new low speed USB device using ohci_hcd and address 17 [12915.200070] usb 4-1: device not accepting address 17, error -62 [12915.380081] usb 4-1: new low speed USB device using ohci_hcd and address 18 [12915.800065] usb 4-1: device not accepting address 18, error -62 [12915.800100] hub 4-0:1.0: unable to enumerate USB device on port 1 i trying to fix that by use commands: cd /sys/bus/pci/drivers/ehci_hcd echo -n "0000:00:02.1" unbind but it did not match the result and i don't have any other idea

    Read the article

  • SSD becomes hot, disk failure warning

    - by Aegluin
    I have a two weeks old SSD (Kingston SSDnow 64GB). Yesterday, the computer shutdown twice and after rebooting I was bombarded with disk failure warnings. I usually take such warnings serious (and backed up), but skeptical. After cooling down, the laptop boots again and the only red Smart value was the temperature (Ubuntu did not show the temperature of failure, but the at that time 29°). After refreshing the Smart status and doing a "self test", everything is green. Before contacting Kingston support, I would like to know whether it could be due to a software issue: Is it possible that it is false alarm, and how can I check? I installed Ubuntu 12.04 32bit and took care of alignment. I supposed Ubuntu set up with optimal settings for SSDs, how can I check that there was no mistake? The current temperature is around 40-56°. Is such a temperature abnormal for SSDs? Output of sudo smartctl --all /dev/sda: http://pastebin.ubuntu.com/1175940/

    Read the article

  • ddrescue a non-solaris disk gets I/O error

    - by rleir
    I am trying to get a disk image of a SCSI disk using ddrescue on Solaris10 (Sparc). The disk is non-solaris, and ddrescue gets an immediate I/O error (as does dd). I used format to label the disk as Solaris, and now ddrescue reads it fine. Is there any way to get the image without labelling the disk as Solaris?

    Read the article

  • deleting old unused images

    - by Ayyash
    As we move on with our content-based websites, lots of images get dumped in our images folder, but we rarely come across self-committed monkyes that delete their files once they do not need it, which means, we end up with a huge list of images in one folder, and it is very tricky to clean it up. My question is (and i dont know if this is the right website to ask it), is there a tool that allows me to find out if an image has been requested by web in the last (n) months? my other general question is, how do you do it? how do you take control of your images folders? what policy do you enforce on developers to clean up? what measures do you take in order to decide what goes and what stays if you end up with an out-of-control situation? my suggestion was to rename the images folder, create a new one, copy the basic ones and wait for someone to complain about a broken image! :) i find this to be the most efficient.

    Read the article

  • Find visually similar images automatically?

    - by TERACytE
    I have a collection of images which is updated regularly that I'd like to group. Rather than reviewing every single image in the collection, I'd like to run an automated tool that pre-groups the images. Adobe PhotoShop Elements has a "Find Visually Similar photos" feature which works well, but it requires manually importing the images first, then I have to select an image each time I need Photoshop to search for images that are visually similar. I do not need a de-duping program since the images are never identical. Is there anything out there that can provide what I'm looking for?

    Read the article

  • Cloned partition not seen correctly by disk utility & gparted

    - by enrico
    Some days ago I cloned my /dev/sda1 partition with clonezilla in partition-to-partition mode to /dev/sda3. It worked, but now that I've finished the setup of system in /dev/sda3, I wanna reinstall /dev/sda1 for other stuffs. This partition is NOT mounted, but ubuntu's DISK UTILITY thinks it is, while it doesn't see as mounted the currently active / partition /dev/sda3. This is the df- TH output : Filesystem Type Size Used Avail Use% Mounted on /dev/sda3 ext4 32G 6.2G 24G 21% / udev devtmpfs 2.2G 13k 2.2G 1% /dev tmpfs tmpfs 845M 906k 844M 1% /run none tmpfs 5.3M 0 5.3M 0% /run/lock none tmpfs 2.2G 115k 2.2G 1% /run/shm /dev/sdb1 fuseblk 321G 147G 174G 46% /Dati Gparted instead, sees /dev/sda1 as NOT mounted (checked with Information option), but it display the BOOT flag on this partition, while the real booted partition /dev/sda3, hasn't it. If I try to format the /dev/sda1 partition, it gives me this error : GParted 0.8.1 --enable-libparted-dmraid Libparted 2.3 Format /dev/sda1 as ext2 00:00:02 ( ERROR ) calibrate /dev/sda1 00:00:00 ( SUCCESS ) path: /dev/sda1 start: 2048 end: 62500863 size: 62498816 (29.80 GiB) set partition type on /dev/sda1 00:00:02 ( SUCCESS ) new partition type: ext2 create new ext2 file system 00:00:00 ( ERROR ) mkfs.ext2 -L "" /dev/sda1 mke2fs 1.41.14 (22-Dec-2010) /dev/sda1 is mounted; will not make a filesystem here! How is possible to correct this behaviour ? Is this due to some lacking option in clonezilla phase ? TIA Enrico

    Read the article

  • Disk Space Full

    - by Loki
    Setting up Ubuntu 10.04 server, the / disk space shows full under df, however the du does not show any of the space used. This has several mounts to Gluster FS'. I have tried a forced FSCK and to no avail. ~# df -h Filesystem Size Used Avail Use% Mounted on /dev/md0 141G 132G 0 100% / none 3.0G 224K 3.0G 1% /dev none 3.0G 0 3.0G 0% /dev/shm none 3.0G 76K 3.0G 1% /var/run none 3.0G 0 3.0G 0% /var/lock none 3.0G 0 3.0G 0% /lib/init/rw /dev/sdb1 9.0T 7.1T 1.9T 80% /brick1 /dev/sdb2 9.0T 7.9T 1.1T 88% /brick2 localhost:/sanvol09 385T 330T 56T 86% /mnt/sanvol09 <- Gluster FS uses local software to contact the DFS I've attempted a tune2fs and same issue arises # du -h --max-depth=1 --one-file-system / 4.0K /selinux 0 /proc 47M /boot 31M /mnt 8.0K /brick1 8.0K /brick2 391M /lib 4.0K /opt 7.4M /bin 0 /sys 379M /var 5.6M /etc 16K /lost+found 43M /root 4.0K /srv 5.7M /home 4.0K /media 7.0M /sbin 0 /dev 4.0K /tmp 4.0K /cdrom 631M /usr 1.6G / more info # df -ih Filesystem Inodes IUsed IFree IUse% Mounted on /dev/md0 9.0M 91K 8.9M 1% / none 746K 770 745K 1% /dev none 747K 1 747K 1% /dev/shm none 747K 32 747K 1% /var/run none 747K 1 747K 1% /var/lock none 747K 3 747K 1% /lib/init/rw /dev/sdb1 583M 1.8M 581M 1% /brick1 /dev/sdb2 583M 1.9M 581M 1% /brick2 localhost:/sanvol09 25G 76M 25G 1% /mnt/sanvol09 The final question: df show's 100% used, and its not, any other known fixes?

    Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >