Search Results

Search found 177 results on 8 pages for 'dutch'.

Page 4/8 | < Previous Page | 1 2 3 4 5 6 7 8  | Next Page >

  • Mac OS X: network disabled because security breach

    - by fireeyedboy
    Dear all, I just recieved a message on my Mac OS X system telling me (loosely translated from Dutch): "The network has been temporarily disabled because the network's security was breached." (It's a wireless WPA2-PSK secured network BTW) I looked in the logs of my router (a Zyxel P-2602HW-D1A) only to see a few (outbound) "syn flood TCP ATTACK" logs, but those were from like a week ago, other than that nothing. What tools on Mac OS X do I have to analyse this security breach occurence? Are there some security logs on Mac OS X that I can inspect? What other measurements should I take? And how serious should I take this warning from Mac OS X? System: Macbook Pro Intel Core 2 Duo 2.2 Ghz OS: Mac OS X 10.5.8 Network: wireless WPA2-PSK Relevant software: Parallels Desktop with Windows XP (was open, but stopped at the time) Other systems on my network: Windows XP SP3 desktop (was running at the time) If you need any more info, don't hestitate to ask. Thanks in advance.

    Read the article

  • Linux server remounted to read-only

    - by Eustahije
    I have tried to find anwser on SF, but no luck. Nothing worked. (and I have just basic knowledge of linux systems - I'm more developer) Hour ago I noticed that database is not reacting anymore. From some reason system went to readonly mode. Complete server is now, ofc, unavailable. Server is VPS in Dutch company, and have no idea what I can do with it now to unlock it. Every suggestion would be more then appriciated. I tried to save as much of database as possible but there are 20G of images, that would be hard to backup, but I can do that also, if that is something that is smart to do.

    Read the article

  • Laptop touchpad works incorrect when on power supply

    - by Ikke
    My original laptop adapter broke down, so I've baught a new one. It's a no-brand adapter from a dutch internet shop. The power of the new adapter is slightly more than the old adapter, but in my opinion that shouldn't be a problem. The laptop is a Toshiba Sattelite L40-15B. When the old adapter broke down due to short circuit, this laptop was connected. When the adapter is unplugged, the touchpad works correctly and smoothly. But as soon as it is connected, the cursor moves jumpy, and response badly. Does anyone know where this problem comes from, and if there's a solution?

    Read the article

  • VBS script works on XP 32-bit but not on 7 64-bit

    - by neurolysis
    This script (a modification of one of Rob van der Woude's) works fine on XP 32-bit, but fails on 7 64-bit at Set objDialog = CreateObject( "UserAccounts.CommonDialog" ), with something similar to the error (translated from Dutch) ActiveX cannot create the object "UserAccounts.CommonDialog". Is there some different way that I have to do this for it to be compatible with Windows 7? MsgBox("Your input avi MUST be exported at 60fps, or this script will not work."),0,"IMPORTANT!" MsgBox("Please select the location of your AVI."),0,"AVI location" WScript.Echo GetFileName( "", "AVI files (*.avi)|*.avi" ) Function GetFileName( myDir, myFilter ) Dim objDialog Set objDialog = CreateObject( "UserAccounts.CommonDialog" ) If myDir = "" Then objDialog.InitialDir = CreateObject( "WScript.Shell" ).SpecialFolders( "MyDocuments" ) Else objDialog.InitialDir = myDir End If If myFilter = "" Then objDialog.Filter = "All files|*.*" Else objDialog.Filter = myFilter End If If objDialog.ShowOpen Then GetFileName = objDialog.FileName Else GetFileName = "" End If End Function

    Read the article

  • Possibly hacked delicious account suddenly containing links to adult sites etc - is there an alternative for delicious

    - by Homunculus Reticulli
    I was searching for some academic publications I saved earlier on delicious. To my astonishment, there are a lot of tags and links in my account, that point to adult material from a Brazillian site (Portugeuse or Spanish), and lots of links to European sports site (in German or Dutch). Most of these links are public, and it seems my account has been hacked. I searched the delicious site to see if I could report the issue, and ofcourse there is no contact details. I've had just about enough with delicious (first, they changed their login system after being taken over - resulting in me losing over a year's worth of bookmarks), now this. Is there a replacement online bookmarking service someone can recommend?

    Read the article

  • SSL certificates with password encrypted key at hosting provider

    - by Jurian Sluiman
    We are a software company and offer hosting to our clients. We have a VPS at a large Dutch datacenter. For some of the applications, we need an SSL certificate which we'd like to encrypt with a password protected keyfile. Our VPS reboots now and then because of updates whatsoever, but that means our apache doesn't start right away because the passwords are needed. This results in downtime and is of course a real big problem. We can give the passwords to our VPS datacenter, or create certificates based on keyfiles without passwords. Both solutions seem not the best one, because they compromise the security of our certificates. What's the best solution for this issue?

    Read the article

  • USB drive is empty in drive management

    - by Simon Verbeke
    I've got a USB drive here, that somebody asked to try and fix. When inserting it, it shows up in explorer, but when I double click it I get a message saying "Please insert a disk into drive H:". So I went to disk management, to see if it was correctly formatted. It doesn't show up in the upper pane, and in the lower pane it tells me there is no medium in H:. After this I used chkdsk: the path is invalid. Then I tried TestDisk, which is supposed to look at raw data, and this can't even find the disk. So I'm assuming the drive is dead, even though its LED is burning. But I was wondering if there might be something else I could try? This system is Windows 7 Ultimate 64bit by the way. (I'm translating things from a Dutch install, so some names might be wrong)

    Read the article

  • Enterprise laptop doesn't recognize WiFi

    - by Michiel
    My cousin is using an enterprise laptop for home work, but for some reason she can't connect to her home WiFi. The laptop isn't able to detect any WiFi networks, although she used to be able to detect and connect to the network. Whenever I troubleshoot for possible issues, Windows Vista is telling me the switch for wireless reception is turned off, but I'm sure it's turned on (If I turn it on, the HP Wireless Assistant tells me it's turned on, so...). But if I take a look at the settings, I get this message (sorry it's in Dutch): So for some reason, the WLAN reception is deactivated and I cannot activate this... Does this have something to do with the laptop being an enterprise laptop? Or is there a simple setting I missed? The most recent driver of the Wireless Network Card (Intel Wireless 5100) is installed.

    Read the article

  • How to change my commandline locale after CentOS decided to change it?

    - by Aron Rotteveel
    So apparently, CentOS decided I was Dutch, and thus, should not have a English locale. Apart from the fact that this greatly bothers me, I am having a pretty hard time actually changing it back. There does not seem to be a setlocale function, and system-config-language tells me I am using an English locale, even though my environment says otherwise. Any help would be appreciated. Output from locale: LANG=nl_NL.UTF-8 LC_CTYPE="nl_NL.UTF-8" LC_NUMERIC="nl_NL.UTF-8" LC_TIME="nl_NL.UTF-8" LC_COLLATE="nl_NL.UTF-8" LC_MONETARY="nl_NL.UTF-8" LC_MESSAGES="nl_NL.UTF-8" LC_PAPER="nl_NL.UTF-8" LC_NAME="nl_NL.UTF-8" LC_ADDRESS="nl_NL.UTF-8" LC_TELEPHONE="nl_NL.UTF-8" LC_MEASUREMENT="nl_NL.UTF-8" LC_IDENTIFICATION="nl_NL.UTF-8" LC_ALL= Both my ~/.bashrc as ~/.bash_profile contain no locale settings. Additionally, /etc/bashrc does not contain any locale references either.

    Read the article

  • Windows Security popup window pops up each time any connection is made

    - by MC Emperor
    I have a problem with the Windows Security popup below. It pops up every time the system tries to make connection with any internet source. It's very annoying, and I don't know how to resolve the problem. (The popup window below is in Dutch, but says something like Connect to somedomain.com. Then it expects you to give your credentials.) I am running on a Windows 7 x64 OS. Now how do I solve this problem? Is it a Windows Firewall problem?

    Read the article

  • using main domain as a mail server

    - by zensys
    I have a mail server set up as mail.mydomain.com like most people do. Now I find out that if I want to secure both mail.mydomain.com and mydomain.com with ssl I need two SSl certificates (or one more versatile but more expensive certificate). Does it make sense to run my mail server under mydomain.com (it is the same physical machine anyway) to save certificate expenses (I am Dutch) or is this being pound foolish? What is the rationale of separating the mail server from the 'www' server apart from the intuitive 'neatness' appeal?

    Read the article

  • links for 2010-12-10

    - by Bob Rhubart
    Oracle VM Blade Cluster Reference Configuration (InfraRed) "All components listed in the reference configuration have been tested together by Oracle, reducing the need for customer testing and the time-consuming and complex effort of designing and deploying a stable configuration." -- Ferhat Hatay (tags: oracle virtualization clustering) White Paper: Accelerating Deployment of Virtualized Infrastructures with the Oracle VM Blade Cluster Reference Configuration  The Oracle VM blade cluster reference configuration described in this paper provides a complete and fully tested virtualized stack that can reduce deployment time by weeks or months while also reducing risk and improving application performance. (tags: oracle otn virtualization infrastructure) White Paper: Best Practices and Guidelines for Deploying the Oracle VM Blade Cluster Reference Configuration This paper provides recommendations and best practices for optimizing virtualization infrastructures when deploying the Oracle VM blade cluster reference configuration.  (tags: oracle otn virtualization clustering) Your Most Familiar Processes - Rethink before using E2.0 | Enterprise 2.0 Blogs "Imagine what gains your organization could have by asking basic questions and reviewing your familiar processes before setting up even the most fundamental E2.0 technologies to support them!" -- John Brunswick (tags: oracle enterprise2.0 otn) Oracle's Global Single Schema (Oracle Master Data Management) "The success of all business processes depends on the availability of accurate master data. Clearly, the solution to this problem is to consolidate all the master data an organization uses to run its business." -- David Butler (tags: oracle otn mdm entarch businessprocess) One step further towards proven results: IT Strategies from Oracle Oracle ACE Douwe Pieter van den Bos shares his thoughts on "IT Strategies from Oracle" in this Google translation of his original Dutch post. (tags: oracle itso entarch) The Underground Oracle VM Manual Just in time for the holidays! Roddy Rodstein's epic 354-page manual is now available in a single pdf.. (tags: oracle otn virtualization oraclevm)

    Read the article

  • This update does not come from a source that supports changelogs

    - by blade19899
    When I get an update via update-manager for a software like blender/vlc, I like to see what has been fixed/changed. I added the ppa for blender/vlc (this only applies to the software I added a ppa for) sudo add-apt-repository ppa:cheleb/blender-svn sudo apt-get update sudo apt-get install blender And vlc like this. sudo add-apt-repository ppa:videolan/stable-daily sudo apt-get update sudo apt-get install vlc And when i run update-manager, or update manager pop-ups I see that vlc/blender have updates but, I can't see what has been changed/fixed this is the message I get, the screenshot below is for mupen but it's the same thing. (I updated vlc and blender, didn't wanna wait for the next update) This update does not come from a source that supports changelogs. (by the way I have a dutch Ubuntu, so the above text i Google translated it!) It only shows which version you have and to which version you be upgrading to. So my question is, how do I get the change-log tab of update-manager working. if it's even possible?

    Read the article

  • links for 2010-06-01

    - by Bob Rhubart
    Venkatakrishnan J: Oracle BI EE 10.1.3.4.1 -- Do we need measures in a Fact Table? Troubleshooting from Rittman Mead's Venkatakrishnan J. (tags: oracle otn businessintelligence datawarehouse) Grid container support : JavaFX Composer An overview how JavaFX Composer supports the grid container. (tags: oracle sun javafx) John Brunswick: Site Studio Mobile Example - WCM Reuse The example highlighted in John Brunswick's post takes advantage of dynamic conversion capabilities in Oracle UCM that allow site content to be created and updated via MS Office documents.  (tags: oracle otn enterprise2.0) @glassfish: GlassFish 3 in the EC2 Cloud powering Dutch and Belgian community polls "The infrastructure is Amazon's Elastic Cloud Computing (EC2) environment because of the dynamic provisioning (elasticity) required by such an online service. Requests are handled directly by the grizzly layer of GlassFish with no extra front-end HTTP layer and shows great performance and scalability." -- The Aquarium (tags: oracle java sun glassfish cloud) James Morle: Flash Storage Will Be Cheap: The End of the World is Nigh "We now need technologies that look more like Oracle Exadata v2, with low-latency RDMA interfaces directly into the Operating System/Database. However, they need to easily and natively support other types of storage (unstructured data such as files, VMware datastores and so forth). The Exadata architecture lends itself well to changes in this area in both hardware trends and access protocols." -- James Morle (tags: oracle otn exadata database architecture virtualization) Java / Oracle SOA blog: HTTP binding in Soa Suite 11g PS2 (tags: ping.fm) Confessions of a Software Developer: Some Tips for Installing Oracle BPM 11g on Windows XP (tags: ping.fm) SOA and Java using Oracle technology: Book review: Oracle Coherence 3.5: Create internet scale applications using Oracle's high-performance data grid (tags: ping.fm)

    Read the article

  • Penne alla MVP

    - by Valter Minute
    I’m sorry for the long silence on this blog and the long delay in replying to the friends that commented on my articles. I’ve been quite busy in the last weeks and I spent a lot of time traveling around Italy (not for pleasure!). In the meantime I’ve been renewed as an MVP on April the 1st (nice date to renew someone with such a bad sense of humor…). I decided to celebrate my MVP award with a new recipe (to be honest, I celebrated by eating the results of this recipe!) and I decided to call it “penne alla MVP”… just because I’m not good in finding nice names for my recipes. Ingredients (for 4 people): 360g pasta (penne or other short pasta) 300g small shrimps 1 cup of whipped cream 2 tablespoons of olive oil 1 small leek 1 glass of beer (I used Hoegaarden dutch white beer… but just because I like it and I finished the rest of the bootle while cooking) Chives Salt, pepper Prepare the pasta by boiling it in salted water, as usual. In the meantime chop the leek in very small bits, heat the oil inside a pan and when the oil is hot, drop the leek chops and let them cook for a few minutes. Add the shrimps and the glass of beer. Let them cook inside beer until they are cooked (if you used pre-cooked shrimps a couple of minutes would be enough to heat them and gave them the flavour of beer). Add the whipped cream and mix it well with the shrimps and the sauce. Dry the pasta and drop the sauce on top of it and then add the chives finely chopped.

    Read the article

  • Why do I get this Debug Assertion Failed? Expression: list iterator not dereferenceable [migrated]

    - by Karel
    I'm trying this example in the (translated to dutch) book of Bjarne Stroustrup (C++): #include <vector> #include <list> #include "complex.h" complex ac[200]; std::vector<complex> vc; std::list<complex> l; template<class In, class Out> void Copy(In from, In too_far, Out to) { while(from != too_far) { *to = *from; ++to; ++from; } } void g(std::vector<complex>& vc , std::list<complex>& lc) { Copy(&ac[0], &ac[200], lc.begin()); // generates debug error Copy(lc.begin(), lc.end(), vc.begin()); // also generates debug error } void f() { ac[0] = complex(10,20); g(vc, l); } int main () { f(); } ** Compiling and Linking goes successful (0 errors/warnings)** But at runtime I get this error: Debug Assertion Failed! Program: path to exe file: \program files\ms vs studio 10.0\vc\include\list Line: 207 Expression: list iterator not dereferenceable For information on how your program can cause an assertion failure, see the Visual C++ documentation on asserts. (Press retry to debug the application)

    Read the article

  • Honing Performance Tuning Skills on MySQL

    - by Antoinette O'Sullivan
    Get hands-on experience with techniques for tuning a MySQL Server with the Authorized MySQL Performance Tuning course.  This course is designed for database administrators, database developers and system administrators who are responsible for managing, optimizing, and tuning a MySQL Server. You can follow this live instructor led training: From your desk. Choose from among the 800+ events on the live-virtual training schedule. In a classroom. A selection of events/locations listed below  Location  Date  Delivery Language  Prague, Czech Republic  1 October 2012  Czech  Warsaw, Poland  9 July 2012  Polish  London, UK  19 November 2012  English  Rome, Italy  23 October 2012  Italian  Lisbon, Portugal  17 September 2012  European Portugese  Aix-en-Provence, France  4 September 2012  French  Strasbourg, France  16 October 2012  French  Nieuwegein, Netherlands  3 September 2012  Dutch  Madrid, Spain  6 August 2012  Spanish  Mechelen, Belgium  1 October 2012  English  Riga, Latvia  10 December 2012  Latvian  Petaling Jaya, Malaysia  10 September 2012  English  Edmonton, Canada  27 August 2012  English  Vancouver, Canada  27 August 2012  English  Ottawa, Canada  26 November 2012  English  Toronto, Canada  26 November 2012  English  Montreal, Canada  26 November 2012  English  Mexico City, Mexico  9 July 2012  Spanish  Sao Paulo, Brazil  2 July 2012  Brazilian Portugese To find a virtual or in-class event that suits you, go or http://oracle.com/education and choose a course and delivery type in your location.  

    Read the article

  • ORACLE PARTNER ARCHITECTS TRAINING

    - by Mike.Hallett(at)Oracle-BI&EPM
    Normal 0 false false false EN-GB X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;} Join the “Oracle Partner Architects Training”. It is aimed at providing Partner experts, architects and consultants with in-depth architectural knowledge about Oracle technology. Here is your chance to learn from the best. Oracle technology beyond the obvious. There are over 40 live and recorded online training sessions, covering many aspects of systems architecture, including these in the domain of BI, data-warehousing and integration: The Oracle Information Management Reference Architecture 3nf Or Data Vault: Mixed Emotions Or A Clear Choice? The Ins And Outs Of Data Integration Introduction To BI-Applications Customizations In BI-Applications Endeca: Analyzing Unstructured Information Download the full schedule in your language (Dutch, English, French, German, Italian, Spanish).

    Read the article

  • Designing for the future

    - by Dennis Vroegop
    User interfaces and user experience design is a fast moving field. It’s something that changes pretty quick: what feels fresh today will look outdated tomorrow. I remember the day I first got a beta version of Windows 95 and I felt swept away by the user interface of the OS. It felt so modern! If I look back now, it feels old. Well, it should: the design is 17 years old which is an eternity in our field. Of course, this is not limited to UI. Same goes for many industries. I want you to think back of the cars that amazed you when you were in your teens (if you are in your teens then this may not apply to you). Didn’t they feel like part of the future? Didn’t you think that this was the ultimate in designs? And aren’t those designs hopelessly outdated today (again, depending on your age, it may just be me)? Let’s review the Win95 design: And let’s compare that to Windows 7: There are so many differences here, I wouldn’t even know where to start explaining them. The general feeling however is one of more usability: studies have shown Windows 7 is much easier to understand for new users than the older versions of Windows did. Of course, experienced Windows users didn’t like it: people are usually afraid of changes and like to stick to what they know. But for new users this was a huge improvement. And that is what UX design is all about: make a product easier to use, with less training required and make users feel more productive. Still, there are areas where this doesn’t hold up. There are plenty examples of designs from the past that are still fresh today. But if you look closely at them, you’ll notice some subtle differences. This differences are what keep the designs fresh. A good example is the signs you’ll find on the road. They haven’t changed much over the years (otherwise people wouldn’t recognize them anymore) but they have been changing gradually to reflect changes in traffic. The same goes for computer interfaces. With each new product or version of a product, the UI and UX is changed gradually. Every now and then however, a bigger change is needed. Just think about the introduction of the Ribbon in Microsoft Office 2007: the whole UI was redesigned. A lot of old users (not in age, but in times of using older versions) didn’t like it a bit, but new users or casual users seem to be more efficient using the product. Which, of course, is exactly the reason behind the changes. I believe that a big engine behind the changes in User Experience design has been the web. In the old days (i.e. before the explosion of the internet) user interface design in Windows applications was limited to choosing the margins between your battleship gray buttons. When the web came along, and especially the web 2.0 where the browsers started to act more and more as application platforms, designers stepped in and made a huge impact. In the browser, they could do whatever they wanted. In the beginning this was limited to the darn blink tag but gradually people really started to think about UX. Even more so: the design of the UI and the whole experience was taken away from the developers and put into the hands of people who knew what they were doing: UX designers. This caused some problems. Everyone who has done a web project in the early 2000’s must have had the same experience: the designers give you a set of Photoshop files and tell you to translate it to HTML. Which, of course, is very hard to do. However, with new tooling and new standards this became much easier. The latest version of HTML and CSS has taken the responsibility for the design away from the developers and placed them in the capable hands of the designers. And that’s where that responsibility belongs, after all, I don’t want a designer to muck around in my c# code just as much as he or she doesn’t want me to poke in the sites style definitions. This change in responsibilities resulted in good looking but more important: better thought out user interfaces in websites. And when websites became more and more interactive, people started to expect the same sort of look and feel from their desktop applications. But that didn’t really happen. Most business applications still have that battleship gray look and feel. Ok, they may use a different color but we’re not talking colors here but usability. Now, you may not be able to read the Dutch captions, but even if you did you wouldn’t understand what was going on. At least, not when you first see it. You have to scan the screen, read all the labels, see how they are related to the other elements on the screen and then figure out what they do. If you’re an experienced user of this application however, this might be a good thing: you know what to do and you get all the information you need in one single screen. But for most applications this isn’t the case. A lot of people only use their computer for a limited time a day (a weird concept for me, but it happens) and need it to get something done and then get on with their lives. For them, a user interface experience like the above isn’t working. (disclaimer: I just picked a screenshot, I am not saying this is bad software but it is an example of about 95% of the Windows applications out there). For the knowledge worker, this isn’t a problem. They use one or two systems and they know exactly what they need to do to achieve their goal. They don’t want any clutter on their screen that distracts them from their task, they just want to be as efficient as possible. When they know the systems they are very productive. The point is, how long does it take to become productive? And: could they be even more productive if the UX was better? Are there things missing that they don’t know about? Are there better ways to achieve what they want to achieve? Also: could a system be designed in such a way that it is not only much more easy to work with but also less tiring? in the example above you need to switch between the keyboard and mouse a lot, something that we now know can be very tiring. The goal of most applications (being client apps or websites on any kind of device) is to provide information. Information is data that when given to the right people, on the right time, in the right place and when it is correct adds value for that person (please, remember that definition: I still hear the statement “the information was wrong” which doesn’t make sense: data can be wrong, information cannot be). So if a system provides data, how can we make sure the chances of becoming information is as high as possible? A good example of a well thought-out system that attempts this is the Zune client. It is a very good application, and I think the UX is much better than it’s main competitor iTunes. Have a look at both: On the left you see the iTunes screenshot, on the right the Zune. As you notice, the Zune screen has more images but less chrome (chrome being visuals not part of the data you want to show, i.e. edges around buttons). The whole thing is text oriented or image oriented, where that text or image is part of the information you need. What is important is big, what’s less important is smaller. Yet, everything you need to know at that point is present and your attention is drawn immediately to what you’re trying to achieve: information about music. You can easily switch between the content on your machine and content on your Zune player but clicking on the image of the player. But if you didn’t know that, you’d find out soon enough: the whole UX is designed in such a way that it invites you to play around. So sooner or later (probably sooner) you’d click on that image and you would see what it does. In the iTunes version it’s harder to find: the discoverability is a lot lower. For inexperienced people the Zune player feels much more natural than the iTunes player, and they get up to speed a lot faster. How does this all work? Why is this UX better? The answer lies in a project from Microsoft with the codename (it seems to be becoming the official name though) “Metro”. Metro is a design language, based on certain principles. When they thought about UX they took a good long look around them and went out in search of metaphors. And they found them. The team noticed that signage in streets, airports, roads, buildings and so on are usually very clear and very precise. These signs give you the information you need and nothing more. It’s simple, clearly understood and fast to understand. A good example are airport signs. Airports can be intimidating places, especially for the non-experienced traveler. In the early 1990’s Amsterdam Airport Schiphol decided to redesign all the signage to make the traveller feel less disoriented. They developed a set of guidelines for signs and implemented those. Soon, most airports around the world adopted these ideas and you see variations of the Dutch signs everywhere on the globe. The signs are text-oriented. Yes, there are icons explaining what it all means for the people who can’t read or don’t understand the language, but the basic sign language is text. It’s clear, it’s high-contrast and it’s easy to understand. One look at the sign and you know where to go. The only thing I don’t like is the green sign pointing to the emergency exit, but since this is the default style for emergency exits I understand why they did this. If you look at the Zune UI again, you’ll notice the similarities. Text oriented, little or no icons, clear usage of fonts and all the information you need. This design language has a set of principles: Clean, light, open and fast Content, not chrome Soulful and alive These are just a couple of the principles, you can read the whole philosophy behind Metro for Windows Phone 7 here. These ideas seem to work. I love my Windows Phone 7. It’s easy to use, it’s clear, there’s no clutter that I do not need. It works for me. And I noticed it works for a lot of other people as well, especially people who aren’t as proficient with computers as I am. You see these ideas in a lot other places. Corning, a manufacturer of glass, has made a video of possible usages of their products. It’s their glimpse into the future. You’ll notice that a lot of the UI in the screens look a lot like what Microsoft is doing with Metro (not coincidentally Corning is the supplier for the Gorilla glass display surface on the new SUR40 device (or Surface v2.0 as a lot of people call it)). The idea behind this vision is that data should be available everywhere where you it. Systems should be available at all times and data is presented in a clear and light manner so that you can turn that data into information. You don’t need a lot of fancy animations that only distract from the data. You want the data and you want it fast. Have a look at this truly inspiring video that made: This is what I believe the future will look like. Of course, not everything is possible, or even desirable. But it is a nice way to think about the future . I feel very strongly about designing applications in such a way that they add value to the user. Designing applications that turn data into information. Applications that make the user feel happy to use them. So… when are you going to drop the battleship-gray designs? Tags van Technorati: surface,design,windows phone 7,wp7,metro

    Read the article

  • Problems configuring nameserver in plesk

    - by Saif Bechan
    Hello, i have some troubles with setting up a nameserver in PLESK for months now. I have tried all possible scenario's but i can not get this to work. I am really in need for some help, and if you can i will really appreciate it. Basically what i want is to just set up a nameserver in PLESK. I have a primary IP, and my host gave me a secondary nameserver i can use. My host is leaseweb in the netherlands. I have made some screenshots of the important parts in my opinion, maybe you guys can see some errors in them. To use the secondary nameserver provided by leaseweb i had to enable ACL on that account, i did so and made a screenshot of that too. The DNS recursion is set to localnets. These settings have not changed for months, so the dns should be fully updated everywhere. The check i run is the following: https://www.sidn.nl/over-nl/aanvraag...-server-check/ Domeinnaam (inclusief .nl): rdshosting.nl Eerste Nameserver: ns1.rdshosting.nl Eerste IP: 62.212.66.33 Tweede Nameserver: ns7.leaseweb.net Tweede ip: 62.212.76.50 If i run the dns check of the netherlands it gives me the following errors: primary name server "ns1.rdshosting.nl." Error: specified name server is not listed as NS record. All public name servers for a domain must also be listed as NS records in the zone of the domain. This domain was specified explicitly as a name server, but not found in the zone description of the primary name server. TE.6a rdshosting.nl. 86400 IN SOA ns1.rdspartners.nl. saif2k.hotmail.com. (2010031102 12H 1H 7D 3H) Error: the MNAME in SOA says "ns1.rdspartners.nl." is the primary name server. The MNAME field in the SOA record (first parameter) lists a different primary name server from the one specified for this check. RFC1035 section 3.3.13 rdshosting.nl. 86400 IN NS ns1.rdspartners.nl. Warning: hidden name server "ns1.rdspartners.nl." never used for first contact. The zone contains an NS record for a host which is not in the list of specified name servers. Hence, this name server will not be used to initiate contact to the domain. It may be used in sequential lookups, so it may still be useful. secondary name server "ns1.rdspartners.nl." [BROKEN] [HIDDEN] Failure: name server at 77.232.85.129 cannot be reached: (unknown error) The name server could not be contacted, which may be due to temporary technical problems or global DNS configuration mistakes. The internal error is shown, but not always clear about the cause. secondary name server "ns7.leaseweb.net." Info: name server looks correctly configured. I have the content of the file etc/named.conf also: // $Id: named.conf,v 1.1.1.1 2001/10/15 07:44:36 kap Exp $ // // Refer to the named(8) man page for details. If you are ever going // to setup a primary server, make sure you've understood the hairy // details of how DNS is working. Even with simple mistakes, you can // break connectivity for affected parties, or cause huge amount of // useless Internet traffic. options { allow-recursion { localnets; }; directory "/var"; auth-nxdomain no; pid-file "/var/run/named/named.pid"; // In addition to the "forwarders" clause, you can force your name // server to never initiate queries of its own, but always ask its // forwarders only, by enabling the following line: // // forward only; // If you've got a DNS server around at your upstream provider, enter // its IP address here, and enable the line below. This will make you // benefit from its cache, thus reduce overall DNS traffic in the Internet. /* forwarders { 127.0.0.1; }; */ /* * If there is a firewall between you and nameservers you want * to talk to, you might need to uncomment the query-source * directive below. Previous versions of BIND always asked * questions using port 53, but BIND 8.1 uses an unprivileged * port by default. */ // query-source address * port 53; /* * If running in a sandbox, you may have to specify a different * location for the dumpfile. */ // dump-file "s/named_dump.db"; }; //Use with the following in named.conf, adjusting the allow list as needed: key "rndc-key" { algorithm hmac-md5; secret "CeMgS23y0oWE20nyv0x40Q=="; }; controls { inet 127.0.0.1 port 953 allow { 127.0.0.1; } keys { "rndc-key"; }; }; // Note: the following will be supported in a future release. /* host { any; } { topology { 127.0.0.0/8; }; }; */ // Setting up secondaries is way easier and the rough picture for this // is explained below. // // If you enable a local name server, don't forget to enter 127.0.0.1 // into your /etc/resolv.conf so this server will be queried first. // Also, make sure to enable it in /etc/rc.conf. zone "." { type hint; file "named.root"; }; zone "0.0.127.IN-ADDR.ARPA" { type master; file "localhost.rev"; }; // NB: Do not use the IP addresses below, they are faked, and only // serve demonstration/documentation purposes! // // Example secondary config entries. It can be convenient to become // a secondary at least for the zone where your own domain is in. Ask // your network administrator for the IP address of the responsible // primary. // // Never forget to include the reverse lookup (IN-ADDR.ARPA) zone! // (This is the first bytes of the respective IP address, in reverse // order, with ".IN-ADDR.ARPA" appended.) // // Before starting to setup a primary zone, better make sure you fully // understand how DNS and BIND works, however. There are sometimes // unobvious pitfalls. Setting up a secondary is comparably simpler. // // NB: Don't blindly enable the examples below. :-) Use actual names // and addresses instead. // // NOTE!!! FreeBSD runs bind in a sandbox (see named_flags in rc.conf). // The directory containing the secondary zones must be write accessible // to bind. The following sequence is suggested: // // mkdir /etc/namedb/s // chown bind.bind /etc/namedb/s // chmod 750 /etc/namedb/s zone "rdshosting.nl" { type master; file "rdshosting.nl"; allow-transfer { 77.232.85.129; 62.212.76.50; common-allow-transfer; }; }; zone "66.212.62.in-addr.arpa" { type master; file "66.212.62.in-addr.arpa"; allow-transfer { common-allow-transfer; }; }; acl common-allow-transfer { 62.212.76.50; }; As i mentioned i made some screenshots of some parts: First the dns settings in plesk: http://www.freeimagehosting.net/uploads/2480faed5e.jpg Second the acl settings in plesk: http://www.freeimagehosting.net/uploads/777f5e69b0.jpg Third my settings at leaseweb: http://www.freeimagehosting.net/uploads/de7122b19c.jpg And last the secondary nameserver settings from leaseweb: http://www.freeimagehosting.net/uploads/fd1da38a8f.jpg If someone has anysuggestion at all on this this will be highly appriciated. Thank you for your time! PS. I am dutch so dutch answers are welcome aswell

    Read the article

  • How can I tell if a CSV is in UTF-7 or UTF-8

    - by dru-zod
    Excel seems to save CSV files in (what I think is) UTF-7, despite the fact that most information I have read suggest that in general, you should not UTF-7. Indeed, other applications (Text pad, which lets me choose) save things in UTF-8 (or Unicode etc, but UTF-7 is not even an option). Using .NET, I read the stream, and have to provide the encoding. If I get it wrong, accented characters are replaced with question marks. If I try and let StreamReader work it out (using detectEncodingFromByteOrderMarks), it gets it wrong (at least, it does if the file has been saved in Excel). It is unlikely that anything other then Excel will be used, so I could just assume UTF-7. Are there any other options? I need to support French (accented), German, Dutch, and Norwegian characters.

    Read the article

  • BIC generator - Generate BIC from IBAN bank account number

    - by Tim
    Is there any existing library or script I can use to generate the BIC code from an IBAN bank account number (and other necessary information)? I've searched the web, but found only IBAN generators. Thanks in advance! Edit: Solution for Belgian IBAN's There exists a webservice for Belgian iban numbers, it's very easy to get the bic from the iban bank account number. $client = new SoapClient('http://www.ibanbic.be/IBANBIC.asmx?WSDL'); $bban = $client->getBelgianBBAN(array('Value' => $iban))->getBelgianBBANResult; $bic = $client->BBANtoBIC(array('Value' => $bban))->BBANtoBICResult; I've searched for a dutch webservice aswell, but I couldn't find one. But you can always make one yourself with the data from http://www.betaalvereniging.nl/europees-betalen/sepa-documentatie/bic-afleiden-uit-iban/

    Read the article

  • Shortest way of determining a name ends with an `s`, `x` or `z`, and then use the `I18n.t` method wi

    - by Koning Baard XIV
    I'm creating a Rails application where users can have a first and last name. Since I'm a perfectionist, the application may not show something like Dennis's profile or Xianx's profile, but rather Dennis' profile and Xianx' profile. I use L18n, so I wanted to ask what is the shortest way of implementing this? This grammar is the same for both English and Dutch, where the application will be translated to. Oh, some important things: I am not afraid of using helpers and the application controller My language files are in Ruby, not YAML Thanks!

    Read the article

  • Can CultureInfo.CurrentCulture differ per application pool?

    - by Peter
    I'm having trouble with CultureInfo in our ASP.NET web application. Our web application returns a different culture, depending on which application pool it is in. In application pool A, it is en-US, but in application pool B, it's nl-BE. I'd like it to be nl-BE, but can't find where to change this (IIS6 by the way). I'm not even sure if this can be changed on an app-pool level. I'm checking with CultureInfo.CurrentCulture.Name. Is it possible to change this for an application pool? Or what else could influence this? In the regional settings of the server, we have selected 'Dutch (Belgium)', which translates to nl-BE, I believe. So where could this application pool be getting the en-US?

    Read the article

  • Html.DropDownListFor() in Mozilla Firefox

    - by Andrey
    I'm rendering a drop down list using Html.DropDownListFor() extension. The markup I get is as follows: select id="NationalityId" name="NationalityId" option value="" /option option selected="selected" value="1"Estonian /option option value="2"Russian /option option value="3"Ukranian /option option value="4"Belorussian /option option value="5"Swedish /option option value="6"Dutch /option /select As you can see, option with value==1 is selected. But in Firefox 3.6.3 it doesn't display as selected, empty string (first option - value == "") is displayed instead. IE7 and Chrome render the page right - the option is selected. Does anybody know what is going on? How do I get this around?

    Read the article

< Previous Page | 1 2 3 4 5 6 7 8  | Next Page >