Search Results

Search found 341 results on 14 pages for 'juan diego'.

Page 4/14 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Server with 3 public IP and iptables

  - by Juan

  I have a linux box with two NIC cards: eth0 and eth1. In one card i have 3 public IP: eth0 = 10.10.10.1, eth0:1= 10.10.10.2 and eth0:2= 10.10.10.3 In the other card i have one local IP eth1 = 192.9.200.1 I want to redirect all the wan traffic for 10.10.10.2 to the LAN 192.9.200.2 and the same for 10.10.10.3 to 192.9.200.3 I have tried with this rule but doesn't work iptables -t nat -A PREROUTING -i eth0 -d 10.10.10.2 -j DNAT --to-destination 192.9.200.2 iptables -t nat -A PREROUTING -i eth0 -d 10.10.10.3 -j DNAT --to-destination 192.9.200.3 IP forward is enabled in /etc/sysctl.conf Can you help me, please.

  Read the article

• PDF booklet printing

  - by Diego

  I have a Samsung ML-2851nd printer (laser, duplex) When printing booklets from PDF files, what is best? Printing with "standard" Page Scaling from Reader, and selecting Booklet printing from the Printer Properties Using the Booklet Printing option from Reader, and only selecting "Print on Both Sides" in the Printer Properties. If I go with the first option, can I use Page Scaling "None" to get bigger text or will it cause any problems? (Fit to printable area shrinks to 93%, I'm using A4 paper) If I go with the second one, what's the correct setting: "Flip on Long Edge" or "Flip on Short Edge"? Thanks!

  Read the article

• Sending mail in localhost:25 with Ssmtp

  - by Juan

  I already have Ssmtp installed and working in a Centos 5.7 machine with Gmail configured. I can send mails in th shell without problems. Now i want to use the ssmtp to allow a web app (installed in the same machine) to send mails but for do this i have to find a way to ssmtp "hears" in the port 25 (or any other). There is a way to do this? There is another simple alternative to ssmtp who allows to send mail using localhost:25? Thanks.

  Read the article

• Openldap, groups, admin groups, etc

  - by Juan Diego

  We have a samba server as PDC with OpenLDAP. So far everything is working, even windows 7 can log on to the Domain. Here is the tricky part. We have many departments, each department has it's own IT guys, and these IT guy should be able to create users in their department and change any info of the users in their department. My Idea was to create 2 groups for each department, For example: Department1 and Admins Department1. Admins Deparment1 has "write" priviledges for members of group Department dn: ou=People,dc=mydomain,dc=com,dc=ec objectClass: top objectClass: organizationalUnit ou: People dn: cn=Admins,ou=Group,dc=mydomain,dc=com,dc=ec objectClass: groupOfNames objectClass: top cn: Admins dn: cn=Admins Department1,cn=Admins,ou=Group,dc=mydomain,dc=com,dc=ec objectClass: groupOfNames objectClass: top cn: Admins Department1 member: uid=jdc,ou=People,dc=mydomain,dc=com,dc=ec structuralObjectClass: groupOfNames I dont know if you should make Department1 as part of Domain Users dn: cn=Deparment1,cn=Domain Users,ou=Group,dc=mydomain,dc=com,dc=ec objectClass: groupOfNames objectClass: top cn: Deparment1 member: uid=user1,ou=People,dc=mydomain,dc=com,dc=ec Or just create the deparments like this. dn: cn=Deparment1,ou=Group,dc=mydomain,dc=com,dc=ec objectClass: groupOfNames objectClass: top cn: Deparment1 member: uid=user1,ou=People,dc=mydomain,dc=com,dc=ec I seems that when you use smbldap tools bydefault the users are part of Domain Users even if you dont have them as part of Domain Users in the memberUid attribute, when I use finger they showup as part of the Domain Users group. I dont want the Departments Admins to be Domain Admins because they have power over all the users, unless I am mistaken. I also have trouble with the ACLs. I was trying to create an acl for members of this Admins group, I was trying with this search, but didnt work ldapsearch -x "(&(objectClass=organizationalPerson)(member=cn=Admins Department1,ou=Group,dc=mydomain,dc=com,dc=ec))" I am open to suggestions.

  Read the article

• Mac Pro updated to OS X 10.6 (Snow Leopard) doesn't recognize second SuperDrive

  - by Juan

  This Mac Pro has dual SuperDrives both upper/lower drivebays, which could be independently ejected via the menubar under 10.5. After upgrading to 10.6, the upper drive no longer responds to the menu command. The eject button has to be hand-pressed with a paperclip to open (but a loaded disc can still be ejected via dragging to the trash). Sounds like a simple setting somewhere, except I can't find it to re-enable the second drive.

  Read the article

• Enable dtrace without sudo on Mac OS X?

  - by Juan

  How do I enable users to use dtrace on Mac OS X. I am trying to do the equivalent of strace on Linux, and I don't like running applications with elevated privileges. UPDATE Ok, the best I can tell. The only way to keep a nefarious application from ruining the system by debugging it is to. Attach to the process in a separate console Use sudo twice So that: sudo dtruss sudo -u myusername potentially_harmful_app I verified this with this short program: #include <iostream> #include <unistd.h> int main() { std::cout << "effective euid " << geteuid() << "\n"; } See this discussion for more info: http://discussions.apple.com/message.jspa?messageID=6430877

  Read the article

• Bypass proxy authentication [closed]

  - by Diego Queiroz

  My scenario: My network has a proxy that requires interative authentication. When I access any URL, an username and password is requested to enable navigation. I do have a valid username/password (this means I have permissions to access external content). I do not have access to the proxy server (any change to the proxy server is not an option). What I need: I need to bypass the interative authentication process and make it an automated authentication process. What I do NOT need/want: I do not need/want to hack the network. I do not need/want to access unauthorized content. In other words, I just need to find a way to "save" my password in the computer (security is not a problem) to allow application that does not support this kind of interative authentication to access the internet (like non-browser software that also uses HTTP port). My guess: My guess is to develop a new proxy server that will run in the local machine (eg, a proxy for the network proxy). This proxy server will access my network proxy, authenticate and forward the content. Of course this is a last resort. I prefer to not need to develop a proxy server. Does someone know other solution? (any operating system)

  Read the article

• FTP Server on Centos 5.8 - Transfer fails randomly

  - by Diego

  Hi have ProFTPD runningon a brand new CentOS 5.8 server with Plesk, and its behaviour is inconsistent at best. I tried to transfer a directory from my PC, and every time I get a transfer failed on a random file. It's never the same one that fails, it just fails. Sometimes it's a .gif, sometimes it's a .css, sometimes it's a JPG. Of several hundred files, a dozen is always failing for no apparent reason. The error that I get is the following: COMMAND:> [27/11/2012 11:43:52] STOR main_border.gif [27/11/2012 11:43:53] 500 Invalid command: try being more creative ERROR:> [27/11/2012 11:43:53] Syntax error: command unrecognized. The above is just an example, the "command unrecognized" occurs with LIST and other commands as well. Here's the ProFTPD configuration, just in case: ServerName "ProFTPD" #ServerType standalone ServerType inetd DefaultServer on <Global> DefaultRoot ~ psacln AllowOverwrite on </Global> DefaultTransferMode binary UseFtpUsers on TimesGMT off SetEnv TZ :/etc/localtime Port 21 Umask 022 MaxInstances 30 ScoreboardFile /var/run/proftpd/scoreboard TransferLog /usr/local/psa/var/log/xferlog #Change default group for new files and directories in vhosts dir to psacln <Directory /var/www/vhosts> GroupOwner psacln </Directory> # Enable PAM authentication AuthPAM on AuthPAMConfig proftpd IdentLookups off UseReverseDNS off AuthGroupFile /etc/group Include /etc/proftpd.include Note: file /etc/proftpd.include is blank. The above is the default configuration set by Plesk 11. I don't know much of why is that way, my knowledge of Linux System Administration is very basic and the one of ProFTPD is a complete zero. Thanks in advance for the help. Update Issue experienced with CuteFTP and FileZilla. Update Replaced ProFTPd with PureFTPd, issue persists. Sometimes I get "command unrecognized", sometimes "failed to establish data connection". I'm starting to think that it could be a network issue, but I have completely zero knowledge of networking.

  Read the article

• Suddenly blocked from a site

  - by Diego Romero

  Suddenly from a time to now I haven't been able to go to a site I used to go frequently for maintenance (Wordpress). I tried different browsers, restarting my laptop, clearing cache, history, cookies. Also did a ping to the site ip, go 4 packets send and 4 lost. This is a problem I think with only my laptop, since I've been able to go into the site from other devices in the same network. I have also tried connecting to the same site from a completely different network with the same problem. I really don't know what to do about this, any advices? PS: site hosted in wp engine if that has anything to do with this problem.

  Read the article

• after upgrade to outlook 2013 Contacts have the default picture in reading pane

  - by Juan Zamudio

  I'm using Windows 8 on a domain (using a domain account not a Microsoft account) connecting to Exchange, all my Contacts were outlook contacts with pictures and other data, I could see the picture of the contact in the reading pane and people pane while using Outlook 2010. After the upgrade to Outlook 2013 I can see my outlook contacts but it appears that they are unavailable in the reading pane because all i can see is the default picture (the default picture picture is also visible in the notifications). If I put the mouse over the name of the people while in the reading pane all I can see is the card with the default info (the only data is that the contact is available in the next 8 hours), if i compose a new message and hover the name of the contact i can see the card with all the data (picture, company, etc.). Is this the default behavior in Outlook 2013 if you are in a domain and not connected to any service or there is a way to show the picture of my contacts in every part of outlook?

  Read the article

• MPEG2-TS streaming: UDP or RTP?

  - by Juan Jose Polanco Arias

  Hello I'm working on an IPTV streaming server in Linux (Ubuntu Server 12.04 LTS) that has a DVB-S/S2 card to obtain satellite channels. Then with MuMuDVB I map all channels in the transponder to a multicast group, for multicast transmission. Now for the MuMuDVB software I can either use UDP for transmission or I can add the RTP header. I was wondering what would be the most convenient for MPEG2-TS because I've heard that RTP is used primarily for MPEG4, but It's also said that RTP can be used for MPEG2-TS. Thanks for your help.

  Read the article

• Hyperic HQ says the server is down, but it is not!

  - by Diego Jancic

  Hi, I've been using HQ for a couple months now, and everything worked fine. But since yesterday all resources go down for a couple hours, and then everything restores to normal, and then go down again without doing anything. The server of course is working, the HQ server and agent are both working, and the IPs were not modified. I've tried to re-run the setup in the HQ agent, and it did not change anything. Agent is in Windows 2008, and Server is in Windows 2003. I'm using HQ Version 4.1.2 (build #1053 - May 06, 2009 - Release Build) Any hint? Thanks! Update: I guess (although I'm not sure) it stopped working when the disk on the server went full, with 0 bytes of free space. Of course I've freed more than 15gbs and restarted the HQ server/database.

  Read the article

• Squid: problem with FTP service (Windows Server)

  - by Diego

  I followed the instructions on this question and everythig works fine. I have an DHCP server that assigns "IP client" without gateway. Internet with IE or Firefox Browser works but FTP service doesn't work. In squid.conf I have put a line: acl Safe_ports port 80 21 443 389 5307 8080 3144 8282 88 8443 20443 11438 1443 8050 30021 10443 4747 4774 1384 Have I to put gateway in DHCP Server? Have you any suggestion for me? Thanks for your help!

  Read the article

• How do I remove automatically added keyboard layouts?

  - by Diego

  I have a Spanish keyboard on my notebook, but I use it mostly for English and Chinese writing. This is how I configured the languages: However, Windows added some layouts on its own (probably when connecting via Remote Desktop to computers with different languages/layouts): Those layouts are all part of the AltShift cycle, which is extremely annoying. How can I remove ENG/US and ESP, considering they don't show in the configuration list? Is there a way to prevent them from being added again?

  Read the article

• Mouse and touchpad move at different speeds

  - by Juan Manuel

  I have a compaq 610 running windows 7, and I use a USB mouse on it. The pointer speed is different for the mouse and the touchpad, so when I go to a meeting and take the notebook but not the mouse, the pointer moves too slow using the touchpad and I have to manually adjust it (of course when I return, I have to slow it down because the mouse would move the pointer too fast). Is there any way to fix this, or to have this setting separate for both devices?

  Read the article

• Windows Live Hotmail contacts in Google Talk or Gmail Chat?

  - by Diego

  Directly from Gmail's integrated chat feature, is it possible to chat with Windows Live Hotmail contacts? I already added them, of course, but they don't show up in the chat thing. I googled it and some old stuff about a Jabber client came up, but it is kind of outdated. Any help is appreciated.

  Read the article

• Computer wakes itself few seconds after hibernation

  - by Juan Zamudio

  Hi all, this is the situation, this is a Dell Optiplex 755, I recently upgraded it to Windows 7 64 bits, it had Windows XP SP3 previously, on XP I never had a problem hibernating the PC, now with Windows 7 64 every time I hibernate the PC it wakes it self after 5 or so seconds. Here are the steps I already tried: On Windows 7 I enabled the hibernation following this steps In the MoBo the sleep settings are on S3 In the Mobo I disable remote wake ups I have disabled the remote wake up in the NIC When I run the lastwake command I get unknown device or something like that I already disable the wake timers on Windows I have the latest drivers from Intel, but I just found out that in the device Manager I get a warning sign on the "Intel AMT SOL (COM3)" device saying that it failed and windows stopped the device, I reinstalled the Intel drivers but nothing changed. The only thing that I haven't touch is Intel ME in the MoBo but I don't if that could help and what settings are correct. Thanks for you help.

  Read the article

• Retrieving a specific value from "df -h" using shell

  - by Diego Dias

  When I use df -h, I get the following output: Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup00-LogVol00 59G 2.2G 54G 4% / /dev/sda1 122M 38M 78M 33% /boot tmpfs 1.1G 0 1.1G 0% /dev/shm 10.10.0.105:/somepath 11T 8.4T 2.1T 81% /storage4 10.11.0.101:/somepath 15T 8.9T 5.9T 61% /storage1 /dev/mapper/patha 5.0T 255G 4.8T 5% /storage5_vol0 /dev/mapper/pathb 5.0T 195G 4.9T 4% /storage5_vol1 /dev/mapper/pathc 5.0T 608G 4.5T 12% /storage5_vol2 I want to write a script that gets the value of Avail column on a specific storage. I used to use df -k /storage_name | tail -1 | awk '{print $3}' But the FileSystem column can have a value or not .. which would change the variable of my script from $3 to $4. How can I get the Avail on a single command line even if there are no values on the previous columns?

  Read the article

• How can I reduce the CPU usage of Offline Files?

  - by Diego

  Whenever I have the Offline Files service running, there is a constant 25% CPU usage on svchost.exe (this is a quad core, so that means it's using up one core). This, in turn, triples the power consumption and keeps the machine hot... I do have several GB synchronized (music collection), but they are not changing at all, in either side. Am I misusing this feature? Is there anything I can configure to keep it down when there's nothing to do? Or should I forget about it and synchronize big folders manually?

  Read the article

• Getting error code -41 when copying files to external drive

  - by diego

  I'm having trouble copying some files from my mac to an external hard drive: I keep getting the nondescript "error code -41". I noticed some of the files with an additional "@" permission bit had the "com.apple.quarantine" flag set. I used the "xattr" command from this article What should I do about com.apple.quarantine? to take care of the quarantine flag and sort that out (these files were copied over from another mac on my network, so I guess OS X flagged them as quarantine). That took care of the problem for those files but I still have some that I can't manually copy over to the external drive. The only other thing I've noticed is that some of these files have a an extra permission bit: "drwxr-xr-x+" which I haven't been successful in googling. Aside from that I don't see anything else. Also, Disk Utility says everything's fine. Any help would be greatly appreciated.

  Read the article

• Remote Desktop Connection over VPN on mac

  - by Diego Faria

  I'm trying to connect to a Windows computer on over a VPN connection using Remote Desktop connection. I opened Network on mac and created a new connection. Interface: VPN. VPN Type: PPTP. I filled the inputs for server address, account name, password and applied. I connect the VPN and it connects. I open Remote Desktop Connection and put the IP of the machina i want to connect but it dont connect, a problem occurs saying that the machina may be turned off and etc. But in a windows machine I can connect there and the machine is up and running. On my mac I ping to the ip address that a want to connect and it has no response. I think that the vpn have a problem, is there a way for me to certificate that i am on the vpn network ? Whats going on?

  Read the article

• I have a problem with FTP service.

  - by Diego

  HI, I follow your istruction and everythig works. I have an DHCP server than it assign "Ip client" without gateway. Internet with IE or Firefox Browser works but FTP service doesn't work. In squid.conf I have put a line: acl Safe_ports port 80 21 443 389 5307 8080 3144 8282 88 8443 20443 11438 1443 8050 30021 10443 4747 4774 1384 Have I to put gateway in DHCP Server? Have you any suggestion for me? Thanks for your help

  Read the article

• apache/debian squeeze server loading directory listing instead of website

  - by Diego

  when you navigate to mywebsite.com/ you see an apache page showing a folder called mywebsite.com/, clicking there then takes me to mywebsite.com/mywebiste.com which doesn't exist, so wordpress shows me the a 404 error. I'm trying to host a wordpress site at mywebsite.com/ but I think I have some kind of directory listing wrong somewhere, though I'm pretty sure I've set up my /etc/apache2/sites-available/mywebsite.com correctly: <VirtualHost *:80> ServerName mywebsite.com ServerAdmin [email protected] DocumentRoot /var/www/mywebsite.com/ <Directory /> Options FollowSymLinks AllowOverride All </Directory> ErrorLog /var/log/apache2/error.log CustomLog /var/log/apache2/access.log combined LogLevel warn </VirtualHost>

  Read the article

• windows printer spool gets stuck with file at 64kb from linux and mac

  - by Juan Diego

  Hi I have two printers one on a file server with windows 2003, and other with windows XP. The thing is that when i try to print from my machine, my file stays in queue for ever, it says 64kb out of whatever the file i send. I have seen similar problems with some machines that run on Mac OS X. The windows machines apparently have no problems printing. They are not connect through active directory, just the network. In the past I have seen people install non microsoft windows Printer server on windows, i dont remember the name of any of the programs. I have being googling a lot and have not found anything to replace the microsoft print spooler service, maybe i am mistaken. Everyday I have to restart the print spooler service i even created a bat file for it. I am out of ideas here.

  Read the article

• Library conflict in Mac OS X

  - by Juan Medín

  I was trying to install the ImageMagick library on Mac OS X Snow Leopard, and first I tried port and, after it failed, homebrew. It updated some dependencies and installed ImageMagick without problems. So far so good. The problem came when I ran Apache. I got the following error in the system log: 07/04/11 12:55:15 org.apache.httpd[41841] httpd: Syntax error on line 115 of /private/etc/apache2/httpd.conf: Cannot load /opt/local/apache2/modules/libphp5.so into server: dlopen(/opt/local/apache2/modules/libphp5.so, 10): Library not loaded: /opt/local/lib/libpng12.0.dylib\n Referenced from: /opt/local/apache2/modules/libphp5.so\n Reason: image not found I checked the /opt/local/lib and surprise! I don't have the libpng12.0 but the libpng14.0. So, as far as I can tell, something went wrong installing the ImageMagick library. Now, I can't find a way to rollback to the previous libraries, other than copying them from the backup. Do you know if is there a way to recover the previous state or reinstall Apache? Or is this just a corrupt state and I must reinstall OS X?

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >