Search Results

Search found 1575 results on 63 pages for 'lts'.

Page 4/63 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• SSH access failure from Ubuntu 12.04 LTS VM

  - by begueradj

  I installed 2 VMs on VirtualBox. VM 1: Windows XP with FreeSSHd and PuTTY installed.IP address: 10.0.0.2 VM 2: Ubuntu 12.04 LTS Server Edition with OpenSSH installed.IP address: 10.0.0.3 From VM 1, I run PuTTY with the IP address of VM 2 (10.0.0.3) and port number 22. I get prompted to input the username and password of VM 2 and everything works fine.From VM 2, I run on the terminal (Ubuntu): ssh [email protected] , I get prompted to enter the password of VM 1. I do so, but it says my password is invalid (while it is the correct one). I even deactived the Firewall on VM 1, but still the problem is here: my password is not accepted from VM 2. Is this due to some settings maybe I must do on VM 1 (Windows XP) so as I can access it with SSH ? Maybe it has something to do with the Firewall of Windows XP ?Important information: ping 10.0.0.2 from VM 1 and ping 10.0.0.3 from VM 2 are working successfully.

  Read the article

• Problemas com instalação do Ubuntu 12.04 LTS e 13.04

  - by user160096

  Não consegui, apesar de diversas tentativas, instalar nenhuma das versões: 12.04 LTS e 13.04. Cheguei a trocar de mouse,uma vez que o anterior não era reconhecido pelo sistema. Configuração: Motherboard Gigabyte GA-970A-D3 8 Gb de memória DDR-3 1 Hd Sata II Samsung de 80Gb, com Windows 7 Ultimate SP-1 1 Hd Sata II de 1Tb Samsung, como dispositivo de dados 1 Monitor 23" Phiips CL 234 1 Placa de Vídeo Gigayte NVidia GeForce GT-220 1 Placa Ethernet Realtek RTL 8139/810x 1 Mouse Microsoft (com software IntelliPoint 8.2) 1 Mouse Logitech M-100 (que usei para subsitutir o da Microsoft, SEM SUCESSO!!!) Na última tentativa, o instalador do ubuntu (tanto no 12.04 quanto no 13.04, PASMEM, não reconheceu o Win7 instalado...foi aí que 'JOGUEI A TOALHA"...! Apesar de minha simpatia pela liberdade e SO's livres e bons, dificuldades como esta desencorajam a transição/migração do usuário... É de se pensar sobre isto...!

  Read the article

• After installing Windows XP I can't boot into Ubuntu 12.04 LTS

  - by Osama

  I know that this issue may have been happened to many people and answered many times. For some reason, I had to install Windows XP beside Ubuntu 12.04 LTS. Once I did that, I'm no longer able to log on to my Ubuntu. The booting list screen doesn't show up. I tried some ways to fix that, one was to try Boot Repair (of course after opening Ubuntu live from a USB), however, the program didn't open after the installation had finished !! So how can I fix that? I hope you guys stick a little with my problem until it is solved

  Read the article

• USB Port not working for Ubuntu 14.04 LTS

  - by user292125

  I have recently installed Ubuntu 14.04 LTS on my system. But the usb port does not seem to be working. When I type lsusb in terminal, following is displayed on the screen: Bus 002 Device 114: ID 0951:1665 Kingston Technology Bus 002 Device 004: ID 413c:2106 Dell Computer Corp. Dell QuietKey Keyboard Bus 002 Device 003: ID 04ca:0062 Lite-On Technology Corp. Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub. However the disk utility shows no media. Kindly help me on this. Suggestions will be appreciated.

  Read the article

• Can't install Ubuntu 13.10 from 12.04 lts

  - by Matt Carle

  I have ubuntu 12.04 lts installed on my hp pavilion and I want to try 13.10. When I try to boot into the livecd, I get the purple ubuntu splash screen, then a blackscreen where some text flashes (to fast to see what it says) then it goes to a black screen and stays there. I know the installation disc is not the problem because I've successfully installed it on a different machine using the same disc. I've been trying to troubleshoot the issue for a while now and no luck. I have a radeon hd 8250 card. I know it's not much to go off of but any help would be greatly appreciated! Thanks!

  Read the article

• How do I reset the password for Ubuntu 12.04 LTS

  - by user169930

  I installed Ubuntu 12.04 LTS using Wubi in the D: drive of my PC. I have Vista installed in the C: drive. I have forgotten my password for my Ubuntu Admin Account. I only have only access to the Guest login. Please note, I don't see any GRUB menu and get only Vista & Ubuntu as options while booting. I can't get into Recovery Mode of Ubuntu using Shift, ESC or any other way. Please let me know how to reset the password.

  Read the article

• Upgrade to 12.04 LTS failed, unable to boot

  - by stargazergal

  I was trying to upgrade to 12.04 LTS, but the upgrade froze in the process (it was stuck for over 8 hours) and I had to do a hard reboot. Now when I boot up, I get the following: mountall /lib/x86_64-linux-gnu/libc.so.6 version 'glibc_2.14' not found. I'm not sure what I need to do from here. Do I need to go back to the previous version? Or can 12.04 still be installed? I don't want to lose any of my files. I am still new to Linux, so please give detailed step-by-step instructions.

  Read the article

• Installing ubuntu 12.04 LTS alongwith windows xp in two different HDDs

  - by chachu

  I have two HDDs. First HDD has four partitions with Windows XP in the first partition Second has two partitions and 15GB unallocated space. I tried to install Ubuntu 12.04 LTS in the second HDD by using Unallocated space. I tried for 6 times. Each time it got installed, but after first restart, it directly boots Windows XP in the first HDD and no boot options appear. Every time I found that the Ubuntu installation used unallocated space and made two partitions one EXT3 and other Linux swap. I don't know what went wrong. During Installation, Ubuntu detected Windows XP. Can anybody help me?

  Read the article

• 12.04 LTS usb wont boot

  - by Niva

  I've tried to install ubuntu 12.04 LTS parallel with Windows 8, on my laptop Clevo m767yu But when I try to boot from USB it just stops when it's trying to read the files. it stops and shows this picture: https://www.dropbox.com/s/np3ptvvmasv7ax2/IMAG0097.jpg If I try to boot from a cd, it stops and shows a cursor blinking. I've tried both usb and cd on other computers, and the both works. I've a little experience with Ubuntu, but I have never had problems with the installing process. Any help will be appreciated!

  Read the article

• How do I remove Skype 4.3 from Ubuntu 14.04 LTS (32-bit)

  - by Lucas W

  I installed Skype on my nephew's new Ubuntu 14.04 LTS machine, and now we've decided to remove it. But I'm not able to locate it in my Installed programs section of Ubuntu Software Center. I'm able to call it up by opening the debian package, Software Center opens it up, but where I would normally see the "Remove" button, I have a "Reinstall" button. For the life of me, I can't figure out how to uninstall Skype. Any suggestions? In case you're wondering I used the version of Skype designed for 12.xx, as there was no option available for Ubuntu 14.xx.

  Read the article

• downgrading a ubuntu 10.04 LTS virtual server

  - by castigli

  I am downgrading an existing ubuntu 10.04 LTS Virtual Server to one with less memory and a smaller drive ( from 80GB to 40GB ). My hoster ( hetzner.de ) does not give me the possibility of doing an inplace downgrade, so I have to create a new server. What is the best way to make an image of the first system and "apply it" to the new one ? I know there other answer but in my situation I am not sure I would be able to use Clonezilla or other GUI tools, because the installation is minimal with no GUI. Thanks in advance Michele

  Read the article

• Drives will not show up on PCI RAID card in Ubuntu 12.04 LTS

  - by Mechh69

  Computer specs Intel E8200 Dual Core MSI G45M MB Ultra U12-40739 PCI Expansion Card - 2 SATA Internal Ports, 1.5Gbps, RAID 0, 1, JBOD 6 GB DDR2 Q1. I installed Ubuntu 12.04 LTS and Amahi, for using Grey Hole, last night. The two disc on the raid card do not show up under Ubuntu 12.04LTS but they do show up under grey hole so I know the drives and the raid card are working and there. I need to access them in Ubuntu to format them and place folders on them but I can not see them or figure out how to access them. Q2. Only 4 of the six drives connected to the MB are showing in Ubuntu, but they show as active in grey hole. I also need to access these drives in Ubuntu as this is my storage server. I am new to LINUX so any help you can provide with simple directions will be greatly appreciated . Thank you Mechh69

  Read the article

• Shutdown problem in ubuntu 12.04 LTS

  - by sudeep

  I am using Ubuntu 12.04 LTS and I'm getting a serious bug: When I try to shutdown my system, my screen goes blank but my CPU fan keeps running, i.e. the processor is still working but I am not able to see anything on my screen. I need to power off my machine for a complete shutdown. I am using a desktop with an Intel P4 processor. I found a solution on the internet involving modifying the GRUB config file. But even after doing so I wasn't able to eliminate the issue.

  Read the article

• Trouble installating openjdk6 on 12.04 LTS

  - by Lost

  I tried to install openjdk6 on 12.04 LTS, with the command: sudo apt-get install openjdk-6-jre but got the following error: Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: openjdk-6-jre : Depends: openjdk-6-jre-headless (= 6b24~pre1-1ubuntu3) but it is not going to be installed E: Unable to correct problems, you have held broken packages. Please help. Thanks!

  Read the article

• Unable to install osspd

  - by crom

  I try to install osspd, but I get the message that I need the library lib6c = 2.17 I tried to install it by: apt-get install osspd http://sourceforge.net/projects/osspd/ http://www.ubuntuupdates.org/package/core/raring/universe/base/osspd apt-cache policy osspd N: Unable to locate package osspd version: cat /proc/version Linux version 3.5.0-34-generic (buildd@roseapple) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #55~precise1-Ubuntu SMP Fri Jun 7 16:25:50 UTC 2013 All with the same result. not easy to backport to 12.10 LTS??!!

  Read the article

• No Option To Duel Boot Ubuntu 12.04 USB

  - by Jordan

  I have used universal usb installer on my HP probook 2000 on my Kingston data traveler (8GB). When I boot I select to boot from USB and then click on Install Ubuntu 12.04 LTS, I get to the partition part, but there is no option to keep existing Windows and dual boot. I only have Erase entire disk and something else. How can I get this dual boot to come up? Screen Shot Here I also cannot use a CD/DVD

  Read the article

• What about Ubuntu 12.04 core updates every 6 months?

  - by user71747

  Ubuntu 12.04 LTS is supported for 5 years, and will get some core updates for 2 years : I guess those updates include the kernel, graphic drivers and X11. But will these updates be optionnal, or not ? I would like to stick with my present version of the kernel and X11, because I'm using an AMD/ATI graphic card with fglrx driver, but according to this link, support for ATI HD 2000/3000/4000 cards will be dropped soon. Thanks !

  Read the article

• Ubuntu 12.04 LTS Wireless Asus USB-N53 (rt3572sta) driver installation issue

  - by Jake Thompson

  My purchase of the Asus USB-N53 just came in today and I spent several hours Googling and researching drivers for this device. When I first plugged the device in it connected fine to my open system, WEP, DHCP configured access point. I opened Google Chrome and a few pages loaded, everything seemed fine. 30 seconds later... Boom! It disconnected and showed attempts to reconnect and asked for the WEP key and just showed a state of infinite connection time until it asked me for the password again. I'm using amd64 (64 bit Ubuntu desktop 12.04 LTS) The official driver can be found here although I had no luck with it. lsusb: Bus 003 Device 002: ID 0b05:179d ASUSTek Computer, Inc. uname -a Linux Jake 3.2.0-31-generic #50-Ubuntu SMP Fri Sep 7 16:16:45 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux ----------------------------------------------------------------------------------Solved: I must of done something wrong when I originally installed the latest drivers from the chipset manufacturers website. I tried reinstalling and did modprobe rt3572sta and waited maybe 10 minutes??? and I connected then I rebooted and everything seems to be working so far. What I did do before hand is unplug the device and typed into the terminal (once for every source I attempted to install): cd '<directory of the driver source>' make uninstall make clean Then I went into the 2.5.0.0 directory and installed that with make make install Then I typed modprobe rt3572sta This was all in superuser. For those who don't know: sudo su

  Read the article

• no hdmi sound on Ubuntu 12.04 LTS

  - by bart

  i'm very new to ubuntu/linux. I installed Ubuntu 12.04 LTS on my vista laptop (nvidia gpu) in dual boot and with some help of google i'm almost ready to go. The only thing that i can't figure out is how to play sound trough my hdmi connected to my tv. Speakers of the laptop are ok, in te sound settings i can see -hdmi -digital -speaker outputs. The top 2 won't play sound so i googled around, found a bunch of things to try but the only thing succesfull so far was to erase all the drivers from the audio settings and they stayed gone. So finally i re-installed from scratch but still no sound trough hdmi. Re-installed 6times in the last 3 days now so the only thing left for me is reaching out for help/advice about this. How can i play sound on my tv connected with hdmi? I will be glad to give more info if needed cuz this is driving me crazy, thanks for your help in advance ! Bart.

  Read the article

• Compiling NETGEAR WNR2000v3 firmware under 12.04.1 LTS

  - by Madmanguruman

  I'm trying to compile the GPL NETGEAR firmware for the WNR2000v3 router using Ubuntu 12.04.1 LTS. I've downloaded and extracted the source, installed everything I think I need, yet there are two build dependencies that I cannot resolve: > make menuconfig .... Build dependency: Please install ncurses. (Missing libncurses.so or ncurses.h) Build dependency: Please install zlib. (Missing libz.so or zlib.h) I've tried apt-getting all of the following packages: libncurses5 libncurses5:i386 libncurses5-dev zlib1g zlib1g-dev zlib1g-dbg The missing libs seem 'real': the target .so files aren't in /usr/lib, although the .h files are in /usr/include. EDIT: some Googling told me of broken or missing symlinks. I found the following: /lib/i386-linux-gnu/libncurses.so.5 -> libncurses.so.5.9 /lib/i386-linux-gnu/libncurses.so.5.9 /lib/i386-linux-gnu/libncursesw.so.5 -> libncursesw.so.5.9 /lib/i386-linux-gnu/libncursesw.so.5.9 /lib/i386-linux-gnu/libz.so.1 -> libz.so.1.2.3.4 /lib/i386-linux-gnu/libz.so.1.2.3.4 so I tried to symlink these to /usr/lib: /usr/lib/libncurses.so -> /lib/i386-linux-gnu/libncurses.so.5 /usr/lib/libz.so -> /lib/i386-linux-gnu/libz.so.1 but the project still complains about missing libncurses and zlib. EDIT: I was able to get the dependencies to work under 8.04. Need to cross-reference things now. Does anyone have some tips on how to debug this sort of issue?

  Read the article

• Ubuntu 12.04 LTS: Error message "Failed to execute child process"

  - by Ron

  I am an Ubuntu-newbie and just started working with Ubuntu (version 12.04 LTS) a couple of days ago. I wanted to add a launcher icon to desktop for launching an application I previously installed. Up to now I can only launch it by typing setsid matlab -desktop into my terminal. Now there is the following problem with the execution via the desktop icon: Whenever I click the desktop icon, I get the following error message: "Failed to execute child process" I would like to add a screenshot, but unfortunately as a new user, I am not allowed to... In the main menu from where I added the icon via drag'n'drop to desktop there is also a permission to execute the .desktop file. I also tried to look for advice on the error message "Failed to execute child process..." but could not find anything useful. Now does anybody have an idea what I am missing? Sorry if this is a stupid question ;) ...but as I just said: I just started with Ubuntu... Thanks to everybody in advance for their help! :) And let me know if you should need any more information... Regards, Ron

  Read the article

• 12.04 LTS boot hangs at "SP5100 TCO timer: mmio address 0xfec000f0 already in use", didn't yesterday

  - by DarkIron112

  Dual-booting Windows 7 and Ubuntu 12.04 LTS. I went to reboot from Win to Ubu, and found a few interesting things. My POST screen is covered in blocks of epileptic colors until I hit GRUB, which continues when I try to boot into Ubuntu. These color blocks don't appear when I use my on-board VGA, so I'll just attribute to that. Grub dimensions are swapped (card vs onboard, probably), but, when interfacing with onboard VGA, the Grub Timeout Counter works and when using my card, it does not (see "[!!!]" below for more information) Booting into Ubuntu directly causes the error: SP5100 TCO timer: mmio address 0xfec000f0 already in use Booting into recovery mode, meanwhile, and then "resuming normal boot" gets me to the desktop without native 1440x900 resolution and graphic drivers can't tell the monitor it's looking at (I assume this is because it's not a full graphic boot, and as it says, some drivers won't run?) [!!!] When I reboot after going into recovery mode, the countdown timer works ONCE, puts me back into default ubuntu boot, and then does not work again until after another recovery-mode boot. Windows 7 can boot perfectly with no issues whatsoever from epilepsy color blocks or driver detection. This makes me wonder /why/ the POST screen can't handle my video card anymore. Amidst all the diagnostics, I opened my case and re-seated the videocard securely, ensuring it wasn't a loose connection-- But this did nothing to help me. Hardware I am running an NVidia GeForce GTX 8800 video card in a PCI slot. I have 4.8GiB memory, an AMD Athlon II Quad-core 640 Processor, on an MSI K9N6GM Series Mobo. Onboard video is an NVidia GeForce MCP61(V/S/P) card. Note: I did not have any of these problems yesterday, and I have been using Ubuntu intensively for a week, though it's been working flawlessly for months. I've recently been using it to mod my Android phone, perhaps I messed something up in the file system?

  Read the article

• Unity 3D doesn't work on ubuntu 12.04 LTS in virtual box hosted by Windows 7 64bit

  - by Mario

  Can't google out the solution through some time so I'm asking here. I have installed Linux Ubuntu 12.04 LTS in virtual box hosted by Windows 7 64bit Simple my 3D stopped working after some kernel headers update<<< few months ago. Just like that. I don't member which version was it. In meantime there was 2 or 3 new releases of VirtualBox which I have installed. Every time I am updating VirtualBox Guest Additions to the newest version. My 3D in Ubuntu still doesn't work. root@pjadmin-VirtualBox:~# /usr/lib/nux/unity_support_test -p OpenGL vendor string: VMware, Inc. OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 0x300) OpenGL version string: 2.1 Mesa 8.0.2 Not software rendered: no Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: no My graphics card in PC is ATI 6850. Please help.

  Read the article

• Ubuntu 10.04 LTS Server - fresh install - failed apt-get update

  - by user87227

  Good day and greetings to all, I just did a fresh installation of Ubuntu 10.04 LTS server without any issues. However, the apt-get update or aptitude update is giving the following errors: a. bzip2:(stdin) is not bzip2 file.ign for all lines plus the following errors : etched 3,582B in 0s (74.1kB/s) Reading package lists... W: A error occurred during the signature verification. The repository is not updated and the previous index files will be used.GPG error: //security.ubuntu.com lucid-security Release: The following signatures were invalid: NODATA 1 NODATA 2 W: A error occurred during the signature verification. The repository is not updated and the previous index files will be used.GPG error: //in.archive.ubuntu.com lucid Release: The following signatures were invalid: NODATA 1 NODATA 2 W: A error occurred during the signature verification. The repository is not updated and the previous index files will be used.GPG error: in.archive.ubuntu.com lucid-updates Release: The following signatures were invalid: NODATA 1 NODATA 2 W: Failed to fetch security.ubuntu.com/ubuntu/dists/lucid-security/Release W: Failed to fetch in.archive.ubuntu.com/ubuntu/dists/lucid/Release W: Failed to fetch in.archive.ubuntu.com/ubuntu/dists/lucid-updates/Release W: Some index files failed to download, they have been ignored, or old ones used instead. Please guide in resolving this error. TIA Regards Venu

  Read the article

• Mouse doesn't work & internet connection not made in Ubuntu 12.04 LTS

  - by David Skare

  Yesterday, Nov 15, 2012, I booted into my Ubuntu 12.04 LTS system. It has resided on a Crucial 128 GB SSD with about 90% free space since early summer. I also have Windows 7 loaded on another Crucial 256 GB SSD. Ubuntu has set up a dual boot system for me even though each OS has its own SSD. I have been using this setup without problems since summer. Yesterday, when the boot process finished, my Microsoft Comfort Mouse 3000 did not work and there was a message that Ubuntu was not connected to the internet. So w/o the mouse I was forced to turn the machine off manually. About 4 days ago Ubuntu worked fine and booting into Win 7 also works fine. I have a backup machine with the same style mouse on it so I swapped the mouse onto this system. Same results. But both mice work when booting into Win 7. Today I removed both SSDs and installed my Ubuntu 12.04 HD which has not been used since I moved Ubuntu to the SSD from it. Same results. Between the last time I used Ubuntu 12.04 on the SSD and when I tried to use it again I made no changes to my machine, either hardware or software. My machines specs are: AMD FX-6100, MSI 990FXA-GD65 AM3+ format with latest BIOS (Ver 19.9), Corsair Vengeance 1866 MHz memory - 16 GB (4GB X 4 sticks), MSI N580GTX video card (nVidia 306.97 drivers), Sony Bravia 32" HD TV as a monitor, Pioneer BluRay DVD-RW, DSL connection to internet thru a router (10 mps), Crucial 128 GB SSD (90% free space), Microsoft Comfort Mouse 3000 I try to maintain current BIOS and drivers for all devices. I mostly use my Ubuntu system for programming in GCC and OpenCOBOL, surfing the internet and e-mailing. No games are installed. I'm stumped! If anyone has experienced this same problem I'd appreciate knowing how you solved it. TIA, Dave

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >