Search Results

Search found 8224 results on 329 pages for 'sometimes'.

Page 4/329 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • External optical drive won't plug 'n play...sometimes.

    - by Connor
    alright, I've looked a lot of different ways, but here goes. i have an external DVD burner that connects via USB and should be plug 'n play however sometimes when I connect it a message pops up requesting any CD or installation software it came with. It didn't come with any though. The confusing part is that if I wait a couple weeks and plug it in, then it works fine, but if I turn it off and back on the problem arises again. I've tried different computers, same problem. There's little to no customer support from the company, Ativa, and no drivers for the product. I'm hoping there's a registry trick for this. any help?

    Read the article

  • Windows Server 2008 SOMETIMES blocks connection to an FTP Site

    - by ssilver2k2
    Hello Everyone Recently, our company has been having issue connecting to a special FTP server that we use offsite to upload small files. We can connect to the test server perfectly fine, but when we use the production ftp, it only randomly connects. If I plug my laptop directly into the modem and pull one of our other static IP addresses, I can connect just fine, but if I use our internal network, it is hit or miss. Also, turning OFF the firewall does NOT change the status of our connection problems. It will still time out. The weird issue is that it sometimes works, and when it does, it instantly asks for credentials and logs us on for that session, but if we disconnect and try again, it may or may not work. This also coincidentally occurred after uninstalling hamachi, and it blew away our internet settings on our Windows Server 2008 box, but everything else is working fine, and it was working fine before hamachi was installed.

    Read the article

  • Firefox: tabs containing a single image sometimes show generic icon instead of thumbnail

    - by ??O?????
    My version of Firefox is 3.5.9, but I've had this issue since single-image tabs started showing a thumbnail of the contained image. Typically, a tab containing a single image will use a thumbnail of the image as the icon before the tab title. Sometimes, though, this icon will be the generic “shaded sphere on blank page” (or perhaps whatever your theme defaults to). I'm guessing this happens whenever height or width is larger than 1024, but I seem to recall (perhaps erroneously) exceptions to this rule. Anyway, hopefully someone will know the definite answer to: Why does this happen? Examples Images showing thumbnails Wikipedia/Natalie Portman #1 (600×887) Wikipedia/Natalie Portman #2 (789×1024) Images not showing thumbnails Wikipedia/BMW series 3 cars (1276×338) Wikipedia/Greek temple (2414×1740)

    Read the article

  • md5sum of large files gives different results sometimes

    - by Emanuele
    I have an AMD quad core, 8 gb RAM, 1 SSD EXT2 (2 months old), 2 HDD EXT4, approximately 1 year old. I'm using Ubuntu 10.04 x86-64 and when I compute the md5sum of large files (9 GB) sometimes I get different values than the one stored on a reference file. Upon restarting and switching off the PC then I get the expected results no matter how many times I repeat it. But this is random. I've turn on ECC (the fastest possible settings) and the issue seems to be rarer, but I've run memtest86+ for 6+ hours without a glitch (and with ECC off!). Any idea? Should I update the BIOS of my motherboard (Asus EVO-something...don't remember it now)? I've tried all the rest apart this, but genuinely don't know what to do anymore... Any suggestion is appreciated!

    Read the article

  • Login sometimes failing immediately after restoring a database

    - by Ian Ringrose
    We have a set of automated tests that restore a database then run some .net code against the database. Sometimes after the database is restored the login from Ado.net fails. If I re-run the test, then the restore and login works OK. The restored database looks OK when viewed with Management Studio. This is only an problem on some machines. We are using SQL server 2008. Is there a known issue with a database restore “returning “ a very short time before the restored database is up and running.

    Read the article

  • Second monitor sometimes will not wake up

    - by peacedog
    My workstation has two monitors and Windows 7 (64bit). Sometimes when I lock my computer and later return and unlock it, the second monitor won't wake up. I have to turn that monitor off and on to get the picture back. They are identical monitors. The "#2" monitor is set as the main display, if that matters. I glanced at the power saving settings but didn't see anything noteworthy, and I'm not sure what I would be looking for (or if that is the right place to look) in the first place. It's not the end of the world but it is annoying. Help?

    Read the article

  • Backup folder on sometimes attached external usb harddrive

    - by ctrler
    My girlfriend no longer has space her laptops drive to store her photos. The drive she has now is 750GB, so to go to a bigger drive would be expensive, as there isn't many 1.5tb 2.5 inch 9.5mm hdd on the market (as of now, there is only one). Because of that, I am thinking of moving her pictures to a cheap external usb hdd. As of now, I'm automatically backing up her important folders (My Documents, Pictures, etc.) using Windows 7 default backup software to a network drive. My problem is that I don't know of a good solution to automatically backup a folder residing on an usb disk. The usb disk won't be attached to the computer all the time, so I can't just treat it as a normal backup folder. Sometimes the backup would run and the folder would not be there! Anyone knows any software or methodology to backup folders on external usb hard drives that are not always present? Thanks

    Read the article

  • pine sometimes not update new received emails

    - by Tim
    Hi, I am using pine on a KUbuntu linux email server to check my emails. Most of the time when I am under "Inbox", the list of emails is updated automatically so I don't have to do things like pushing the refresh button when I am under web. But sometimes it does not and I have to type "<" to go to the upper level and then select "Inbox" to enter again into the inbox directory to find out that I do receive new emails that are not shown previously. I was wondering what the problem is? Thanks and regards!

    Read the article

  • pine sometimes not update new received emails

    - by Tim
    Hi, I am using pine on a KUbuntu linux email server to check my emails. Most of the time when I am under "Inbox", the list of emails is updated automatically so I don't have to do things like pushing the refresh button when I am under web. But sometimes it does not and I have to type "<" to go to the upper level and then select "Inbox" to enter again into the inbox directory to find out that I do receive new emails that are not shown previously. I was wondering what the problem is? Thanks and regards!

    Read the article

  • iPhone 3GS Contacts 'Sometimes' Won't Sync Back to Exchange

    - by marcusstarnes
    I don't know if anyone else has experienced this so just thought I'd find out if it's a known issue or if it's just happening to me. since I first got my 3GS, I've had it synced with Micorsoft Exchange (initially 2003, now 2008). If I go into my contacts on the phone and add a new contact it immediately syncs back at my Exchange server and vice versa. However, sometimes if I add a contact via one of the 'quick links' (Like if I get a text from someone not already in my Contacts on the phone, then use the facility to create a contact for this number), while the contact is visible on the iPhone, it 'never' makes it to the Exchange server. Does this happen to anyone else?

    Read the article

  • Emails from web site sometimes blank or gibberish

    - by John Gardeniers
    Our company has one web site with an online store based on osCommerce. The system sends emails for various reasons, such as password changes, order confirmations, etc., using PHP's mail() function. We occasionally have customers report that the email they received is either blank (email is plain text format) or gibberish (email is in HTML format). In the latter case it's really just HTML that's being displayed as raw text but of course the customers can't read it. In this case the first opening tag's <, and sometimes a few more characters, has gone missing. In an attempt to determine whether this was happening only for certain customers or email systems I configured the web site to send a CC of each message to a service account at my end. Those CC'd messages always arrive intact and display correctly in Outlook. For what it's worth, it seems to happen a little more frequently to Hotmail users but is certainly not limited to them. As the web site is on a shared (Debian) host there's precious little I can do about debugging things from that end, although if I made the right request I feel the hosting company staff would help me, even though they have limited resources to spend on such matters. Any suggestions on what else I might do to try and determine just why those emails are not being received correctly by some customers, yet a CC copy arrives just fine?

    Read the article

  • Sometimes, Synaptics Touchpad Tends Cursor to Top-Right Corner

    - by John Chadwick
    This has been a reoccurring issue for me, pretty much since I've owned this laptop (an ASUS G60JX.) Sometimes, the cursor will stop working properly and instead tend toward the top right of the screen. Basically, sometime into my usage (maybe after a couple hours) the touchpad will inevitably begin to malfunction, where it has confusing patterns of pushing the mouse cursor toward the top right of the screen. In addition, certain features (like momentum) seem to quit working entirely. It makes using the cursor extremely difficult. I've been having this issue across very many drivers. Pretty much as soon as multitouch came into the mix, although I don't believe multitouch has anything to do with it. It appears that, in the state of malfunction, it doesn't matter how you touch the touchpad, but where you touch it. Certain regions do not seem to trigger the cursor to move to the top right corner. In fact, no specific region seems to, but some areas do so more often than others. The issue can be resolved temporarily by putting the computer into sleep mode and awakening it. I have found no way to recreate this success without sleeping the computer or rebooting. Disabling and re-enabling the touchpad device does not do anything to resolve the problem. This issue does not affect my WACOM tablet nor any USB mice, and can be resolved (not to my satisfactory) by uninstalling the touchpad drivers. I'm looking for a solution, or at least a workaround that doesn't require sleep mode.

    Read the article

  • Word 2010 creates multiple processes... sometimes

    - by Bill Sambrone
    I've run into a strange behavior when I migrated our users from Office 2007 / Vista to Office 2010 / Windows 7 (all 32-bit). They use a web based document management system called NetDocuments which stores all their .doc/.docx files. Generally, when they click on a doc from the browser window it fires up Word and opens the doc. Word has an add-in in it from NetDocs as well so it can upload the changed document directly back to the NetDocs server. I get a phone call when Word crashes, and every single time it has crashed I have witnessed multiple winword.exe processes running in task manager. I used process explorer to see what created the process, and it is all Internet Explorer. So far I have rolled them back to IE8 and the problem happens less frequently, but it still happens. When I try to duplicate the problem, I can make it happen sometimes if I open multiple documents very quickly. Using lightning fast alt-tab reflexes, I DO see that a 2nd WinWord process is created when a user clicks on a document, then it closes once the document is open. I think what is happening is that the secondary WinWord process that does some sort of NetDocs voodoo is getting stuck open. This behavior is new to Word 2010 / Windows 7 and google searching isn't coming up with much. I have seen a few posts that this is a known issue in certain circumstances and there is no "fix", but I thought it would good to ask others on this. Thanks!

    Read the article

  • CommunityEngine + TinyMCE + Safari or Chrome + My server sometimes generate corrupted code

    - by user31362
    Hello All, I'm using Community engine. It is really a great job But I encountered a strange phenomenon I couldn't solve it. This problem happens only when I open any page contains tinymce by using safari or chrome browsers. It shows me a corrupted code and the page is damaged. kindly check the following photo: http://img190.imageshack.us/img190/5880/screenshot20100111at115.png notice "Delete this user" link then check the source code. There is a weird code injecting itself in the original code. The weird code is tinymce thing: <script type="text/javascript" src="http://ce.mysite.net/plugin_assets/ community_engine/javascripts/tiny_mce/themes/advanced/langs/en.js? 1260693864"></script> <script type="text/javascript" src="http://ce.mysite.net/plugin_assets/ community_engine/javascripts/tiny_mce/plugins/curblyadvimage/langs/ en.js?1260693864"></script> it injected between onclick=" and if (confirm.... I deployed CE on my laptop and my server. I didn't see this problem locally but sometimes (not always) this problem appears on my server. I'm sure that I installed all required gems on the server This bug is annoyed me and I wish to help me. Thanks

    Read the article

  • Computer not finding hard drives on boot -sometimes-

    - by todd.pund
    Computer specs: Mobo: Gigabyte ultradurable 3 - GA-970A-UD3 Processor: First gen I7 3.2GHZ Ram: 8GB Kingston DDR3 1066 Video Card: EVGA NVidia GTX 460 1GB Hard Drive: 500MB 7200rpm x2 (can't remember brand, sorry I'm at work.) Last week my developer preview for Windows 8 ran out so I put my copy of windows 7 back on the computer. The computer at that point started suffering from frequent freezing and crashing. When I rebooted the computer sometimes it wouldn't find the system HD at all. When I looked at the post screen it seemed to show that it wasn't finding either of the HDs. Then yesterday when turning on the computer I just got GRUB as a message (not a GRUB prompt, just GRUB) I haven't had a dual boot of Linux for at least a year. I loaded windows 7 recovery console from the disk and ran: bootrec /fixboot bootrec /fixmbr Which did not help. At that point I just installed Ubuntu 13.04 over the windows 7 install and still received the GRUB post. I went into the BIOS and switched the Hard Drive priorities and then it loaded into Ubuntu fine. For several days everything was just hunky dory until I installed the Ubuntu version of Steam, install Portal and tried to run it. At that point the computer froze and after hard rebooting couldn't find the hard disks again. Then after restarting the system it loaded up fine again and no issues since. (I have not tried to launch portal again). My next thought is to remove the system hard drive and try to use the secondary as the master to see if the primary HD is bad. I'm sorry if this has been confusing, I'll answer any questions I can. Any thoughts?

    Read the article

  • Plug-in device to front USB computer *sometimes* restarts

    - by Mark A. Nicolosi
    I've got a strange problem that very occasionally (maybe once a month) when I plug-in something to the front USB on my computer, the computer suddently restarts. This also happens when I touch the front USB ports sometimes. This has been going on for a few years and a lot of the components in my PC have changed. I thought it was my home wiring, but I moved last year and it still happened. I thought maybe it was the motherboard, but that was upgraded 9 months ago and it still happens. I thought it was my case, but I changed that recently and it still happens. I thought maybe it was my PSU, but I upgraded that yesterday and it still happens. I'm pretty sure this is an electro-static thing, but I thought that modern computers have protection against this sort of thing. Maybe I should move my case off the floor (carpet) and stop wearing songs all the time. Edit: Just to clarify this is a computer that I built. The components have been upgraded throughout the years and it's not much the same computer anymore. This doesn't happen very often, but it is annoying, because I don't know what the cause is. Anyone have any ideas?

    Read the article

  • Ubuntu 10.04 LTS - Dual monitor works only sometimes (ATI multi-desktop)

    - by Beres Botond
    I've been using my laptop with an external LCD monitor attached to it at work (Philips 201E). And at home with a different external monitor (Samsung 2032BW). I have an ATI graphics card (HD3450), with Ati Catalyst drivers enabled and I'm using the Single display desktop (Multi-Desktop) seeting. At work I have the external monitor on the left and laptop on the right, while at home the other way around. So when I switch between the two setups, I just needed to go to Ati Catalyst Control Center, change the order of the displays, change the resolution (Home - 1680x1050, Work - 1440x900), reboot and it was all fine. But since a while it doesn't work properly anymore: At home it still works fine. At work it doesn't work. Sometimes it works for some reason, after a few resolution/setting changes in ACCC and reboots... it's very strange and annoying. With the home monitor I can see the whole bootup process on both monitors (laptop + LCD) and it always just works fine. With the work monitor on the external LCD monitor I just see "No video input" until I get to the login screen, then it shows up there as well. But after login it will either: Flicker a few times, but then work OK. Or (more often) Flicker once and then go back to "No video input" again. I usually end up rebooting a few times until it works. Does anyone have any idea for fixing it? This is my xorg.conf currently: Section "ServerLayout" Identifier "amdcccle Layout" Screen 0 "amdcccle-Screen[6]-0" 0 0 Screen "amdcccle-Screen[6]-1" 1280 0 EndSection Section "Files" EndSection Section "Module" Load "glx" EndSection Section "ServerFlags" Option "Xinerama" "off" EndSection Section "Monitor" Identifier "0-LVDS" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1280x768" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "0-CRT1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" Option "PreferredMode" "1440x900" EndSection Section "Device" Identifier "Default Device" Driver "fglrx" EndSection Section "Device" Identifier "amdcccle-Device[6]-0" Driver "fglrx" Option "Monitor-LVDS" "0-LVDS" BusID "PCI:6:0:0" EndSection Section "Device" Identifier "amdcccle-Device[6]-1" Driver "fglrx" Option "Monitor-CRT1" "0-CRT1" BusID "PCI:6:0:0" Screen 1 EndSection Section "Screen" Identifier "Default Screen" DefaultDepth 24 SubSection "Display" Virtual 2560 1024 EndSubSection EndSection Section "Screen" Identifier "amdcccle-Screen[6]-0" Device "amdcccle-Device[6]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "amdcccle-Screen[6]-1" Device "amdcccle-Device[6]-1" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

    Read the article

  • Laptops on Windows Domain sometimes have problems accessing internet when off-site

    - by FSUScoot
    Hi all-- We've had this problem for a long time. When users travel, sometimes they can't get internet access from a wired or wireless connection. Here are a couple examples: 1) A user goes to a hotel and tries to access the wireless in their room. They can connect to the access point. They open a web browser and they can't get re-directed to the hotel's login page. Because they can't log in, there's no internet access. 2) A user goes to another laboratory/university and tries to access the wired network. They connect, link is fine, PC gets IP from DHCP but no internet access. There's no login page to be re-directed to. It should just "work". What I've found is that it's a DNS issue. Because the computer is on a Windows Domain, it seems it MUST use our DNS servers. Even if you connect to an outside network and do an ipconfig /all, it looks like everything is ok. It'll even show their DNS servers listed in the config. The computer just won't use the other network's DNS server. I found a reg key that keeps our DNS servers listed and it seems that they take priority every time: HKLM\SOFTWARE\Policies\Microsoft\Windows NT\DNSClient All the values under that key are for our AD domain. NameServer and Searchlist never change. What I've found is if the user edits the NameServer string and puts the DNS server of the network they're on, everything works just fine. They get re-directed to the hotel's correct login page or their internet access starts working. It's only a problem if the network they're on blocks outside DNS or a hotel that uses an internal name in their front page redirection that only their DNS server knows about, i.e., not public. If the re-direct page starts with an IP, like 10.10.10.10, it'll work just fine. Obviously this isn't a fix for everyone. Most of my users are pretty knowledgeable so it’s easy for me to walk them through or send them a .reg file that they can edit and run. This problem isn't limited to Windows 7. It was like this with XP as well. It's not hardware related. The problem exists on both wired and wireless, Intel or Broadcom, laptops or desktops. Anyone else have this problem? Is there a GPO I can change that I missed? Got a good work-around for this? Thanks for any help!

    Read the article

  • Microsoft 2003 DNS sometimes cant query for some A pointers when their TTL expires

    - by Bq
    Warning Long question :) We have a win 2003 server with a DNS server, every now and then it cant provide us with some A pointers for a specific domain. I have a small script running which asks for SOA,NS and A records for the domain in question and sometimes when the TTL expires the DNS fails to get the A records again, a Clear Cache fixes the problem.. Have a look Here it worked when the TTL expired Thu Apr 29 15:24:20 METDST 2010 dig basefarm.net soa basefarm.net. 64908 IN SOA ns01.osl.basefarm.net. hostmaster.basefarm.net. 2010042613 86400 3600 2419200 600 ns01.osl.basefarm.net. 299 IN A 81.93.160.4 dig basefarm.net ns basefarm.net. 64908 IN NS ns01.sth.basefarm.net. basefarm.net. 64908 IN NS ns01.osl.basefarm.net. ns01.sth.basefarm.net. 299 IN A 80.76.149.76 ns01.osl.basefarm.net. 299 IN A 81.93.160.4 dig ns01.sth.basefarm.net a ns01.sth.basefarm.net. 299 IN A 80.76.149.76 The TTL expired for ns01.sth.basefarm.net and ns01.osl.basefarm.net but the DNS managed to get the new values (TTL 3600) Thu Apr 29 15:29:20 METDST 2010 dig basefarm.net soa basefarm.net. 64608 IN SOA ns01.osl.basefarm.net. hostmaster.basefarm.net. 2010042613 86400 3600 2419200 600 ns01.osl.basefarm.net. 3600 IN A 81.93.160.4 dig basefarm.net ns basefarm.net. 64608 IN NS ns01.sth.basefarm.net. basefarm.net. 64608 IN NS ns01.osl.basefarm.net. ns01.sth.basefarm.net. 3600 IN A 80.76.149.76 ns01.osl.basefarm.net. 3600 IN A 81.93.160.4 dig ns01.sth.basefarm.net a ns01.sth.basefarm.net. 3600 IN A 80.76.149.76 But then another time it fails, and we need to clear the dns cache for it to start working again... Thu Apr 29 17:24:23 METDST 2010 dig basefarm.net soa basefarm.net. 57705 IN SOA ns01.osl.basefarm.net. hostmaster.basefarm.net. 2010042613 86400 3600 2419200 600 ns01.osl.basefarm.net. 299 IN A 81.93.160.4 dig basefarm.net ns basefarm.net. 57705 IN NS ns01.sth.basefarm.net. basefarm.net. 57705 IN NS ns01.osl.basefarm.net. ns01.sth.basefarm.net. 299 IN A 80.76.149.76 ns01.osl.basefarm.net. 299 IN A 81.93.160.4 dig ns01.sth.basefarm.net a ns01.sth.basefarm.net. 299 IN A 80.76.149.76 The TTL expires but the DNS cant get the ip addresses for ns01.sth.basefarm.net and ns01.osl.basefarm.net Thu Apr 29 17:29:23 METDST 2010 dig basefarm.net soa basefarm.net. 57405 IN SOA ns01.osl.basefarm.net. hostmaster.basefarm.net. 2010042613 86400 3600 2419200 600 ns01.osl.basefarm.net. 3600 IN A 81.93.160.4 dig basefarm.net ns basefarm.net. 57405 IN NS ns01.sth.basefarm.net. basefarm.net. 57405 IN NS ns01.osl.basefarm.net. dig ns01.sth.basefarm.net a Lookup failed I'm really lost on this one and have tried asking Google but to no avail..

    Read the article

  • Windows 7 sometimes boots in VGA mode

    - by TuxRug
    I have an Asus G50VT-x5 laptop with nVidia GeForce9800M-GS graphics. Normally, Windows boots normally, but about 20% of the time (rough estimate), it will boot with the fallback VGA driver, maxing out at 800x600 with no Aero. I've checked the system logs and there is nothing indicating an error loading the nVidia driver. It even specifies in the logs that the Nvidia Display Driver service started successfully, even though it has booted in safe graphics mode. This has been happening for a while, but it's happening a little more often now than it was before. Since the first time my system exhibited this behavior, I have updated my graphics driver a handful of times. I used System Information for Windows to check for problems there, but the only thing that stood out was the following: Core Temperature 4486449 °C (8075639 °F) Shaders Temperature 1171513530 °C (2108724330 °F) I know this reading is incorrect, because my laptop is nowhere near the surface of the sun and my desk has not burst into flames. When it's opererating normally, I get a sane reading like [Core Temperature 58 °C (136 °F)] with no Shaders Temperature listed. All I have to do to resolve the issue is reboot. I have seen no stability issues with the graphics or anything else. A long time ago, I had an issue with this computer where my framerate would suddenly drop during a 3D game from 40fps to <1fps, but after looking at the temperature readout immediately after quitting a game, I removed the bottom panel and blew the dust out of the vent and heatsink. Since then I have no drops in framerate under any situation. I have uploaded a zip containing the SIW reports for when the problem is occurring and when the computer is operating normally. I don't have a paid account so it can only be downloaded 10 times, so please only download the reports if you think you can use them. If you try to download the reports and they are no longer available, please comment and I will re-upload them. If you want to look at the files, they are on Rapidshare. EDIT It happened again, and I looked a little deeper into the System logs. When this happens, there are a lot of errors about other device drivers unable to start. All of these errors are for PnP drivers. Also, my USB keyboard and mouse take a few moments before they actually start working, although this happens sometimes the first normal boot as well. I am quite sure this is related, so I am adding the pnp tag. Also, CHKDSK will not run on boot. Even if a check is scheduled or a volume is manually set as dirty, CHKDSK will be skipped entirely, not even leaving an entry in the System logs. I tried running CHKNTFS /D, which did not work. I then manually changed my HKLM\System\CurrentControlSet\Control\Session Manager BootExecute value to the default listed on Microsoft's website. That did not work either. I ended up booting to repair mode and running CHKDSK there, which found a number of minor inconsistencies on my system drive, but none on my data drive. I have no idea if this is related. Some more information for those who don't download my SIW report file: Antivirus and Firewall are ESET Smart Security I have three different virutalization programs installed: VMware Player, Windows Virtual PC, and VirtualBox. The network adapters for these show up in the log of failed device starts. EDIT 2 I tried running sfc /scannow, which reported that it found corrupted files that could not be fixed. The CBS log is extremely cryptic. I tried booting to my install disk, launching repair mode, and doing an offline sfc from there, which produced the same result.

    Read the article

  • My 301 redirect via htaccess code is not working sometimes

    - by Gagan Modi
    The 301 redirect is working sometime and somes time not What could be the problem in below code its over a week now RewriteCond %{HTTP_HOST} ^usedcarindelhi\.com$ [OR] RewriteCond %{HTTP_HOST} ^www\.usedcarindelhi\.com$ RewriteRule ^/?$ "http\:\/\/www\.mycarhelpline\.com\/index\ .php\?option\=com_usedcar\&view\=category\&Itemid\=3\&location\=delhi" [R=301,L] i basically need to move usedcarindelhi.com & www.usedcarindelhi.com to http://www.mycarhelpline.com/index.php?option=com_usedcar&view=category&Itemid=3&location=delhi Sometimes the 301 redirect is working making me go to mycarhelpline n sometimes am find myself on usedcarindelhi can someone help in this pls Thanks

    Read the article

  • JSON/PrototypeJS - why does this only work SOMETIMES?

    - by koko
    This is driving me nuts! I'm getting some JSON from my server: {"id262":{"done":null,"status":null,"verfall":null,"id":262,"bid":20044,"art":"owner","uid":"demo02","aktion":null,"termin_datum":null,"docid":null,"gruppenid":null,"news":"newsstring","datum":"11.06.2010","header":"headerstring","for_uid":"demo01"}, "id263":{"done":null,"status":"pending","verfall":null,"bid":20044,"id":263,"uid":"demo02","art":"foo","aktion":"dosomething","termin_datum":"11.06.2010","docid":null,"gruppenid":null,"datum":"11.06.2010","news":"newsstring","for_uid":"demo01","header":"headerstring"}, "id261":{"done":null,"status":null,"verfall":null,"id":261,"bid":20044,"art":"termin","uid":"demo02","aktion":null,"termin_datum":"25.06.2010","docid":null,"gruppenid":null,"news":"newsstring","datum":"11.06.2010","header":"headerstring","for_uid":null}} This is how my JS looks like: var user = 'demo02'; new Ajax.Request('myscript.pl?someparameter=value', { method:'get', onSuccess: function(transport){ var db_json = transport.responseText.evalJSON(), propCount = 0, someArray1 = [], someArray2 = [], otherArray = []; //JSON DEBUG console.log('validated string:'); console.log(transport.responseText.evalJSON(true)); for(var prop in db_json) { propCount++; if ( (db_json[prop].art == 'foo') && (db_json[prop].for_uid == user) ) { someArray1.push(db_json[prop]); } else if( (db_json[prop].art == 'foo') && (db_json[prop].uid == user) ) { someArray2.push(db_json[prop]); } else if( db_json[prop].art == 'log' ) { otherArray.push(db_json[prop]); } } if(someArray1.length>0) { someArray1.map(function(el){ $('someArray1target').innerHTML += el.done; //do more stuff }); } if(someArray2.length>0) { someArray2.map(function(el){ $('someArray2target').innerHTML += el.done; //do more stuff }); } }); Sometimes, it works perfectly. Sometimes, i get my JSON String (it appears in Firebug's "answer"-tab), but it won't log the JSON in console-log(). I'm not getting any errors and javascript is still working. Next time after reloading, it might work, but it might not. I cannot remotely imagine why this only happens sometimes!

    Read the article

  • "javascript: void(0)" links sometimes break event handlers in internet explorer

    - by internet man
    A while back I ran in to a problem where after clicking an anchor with "javascript: void(0)" events just stopped firing. I read that following a link puts the page in a different state and in that different state events don't fire. Even though the link is not real, it sometimes confuses IE. Anyway, I removed the "javascript: void(0)"'s and the problem has not been seen again. Now, in a different application I am seeing the same thing... kinda. Clicking the "javascript: void(0)" sometimes has no ill effect. But then for some reason or another after clicking the bad link the page will stop working. Once this happens it will continue to happen consistently until the client machine is rebooted. After reboot, you are back to it sometimes happening. Crazy right? Reboot fixing a web page!?!?! So, my question is has anyone seen this before? Can anyone give an explanation for this issue? Any documentation on this issue? I can't seem to find anything on it again. Does this even make sense? I already know "javascript: void(0)" is bad practice... I am just looking to understand the issue. Specifically, this is IE7. Thanks for reading!

    Read the article

  • Sending USR2 to mongrel_rails sometimes results in an “Address already in use” on the restart

    - by Ben
    We have a rolling-restart mode for our mongrel cluster that sends a USR2 signal to each running process. This works great, most of the time. But very occasionally the mongrel process will shutdown, and then fail to restart, with the following error: /usr/local/lib/ruby/gems/1.8/gems/mongrel-1.1.5/bin/../lib/mongrel/tcphack.rb:12:in `initialize_without_backlog': Address already in use - bind(2) (Errno::EADDRINUSE) from /usr/local/lib/ruby/gems/1.8/gems/mongrel-1.1.5/bin/../lib/mongrel/tcphack.rb:12:in `initialize' from /usr/local/lib/ruby/gems/1.8/gems/mongrel-1.1.5/bin/../lib/mongrel.rb:93:in `new' from /usr/local/lib/ruby/gems/1.8/gems/mongrel-1.1.5/bin/../lib/mongrel.rb:93:in `initialize' from /usr/local/lib/ruby/gems/1.8/gems/mongrel-1.1.5/bin/../lib/mongrel/configurator.rb:139:in `new' from /usr/local/lib/ruby/gems/1.8/gems/mongrel-1.1.5/bin/../lib/mongrel/configurator.rb:139:in `listener' Looking though the mongrel source, the USR2 handler calls a synchronous stop on the running server, so it ought to block until the socket has been released. Has anyone seen this error? Does anyone have any ideas what might cause it? (I asked this question over on StackOverflow initially, but thought it might be more appropriate here)

    Read the article

  • why lynx browser sometimes can open a page that normal browser can not

    - by Salvador Dali
    I found a really interesting peculiarity of Lynx while trying to write an application using bitcoin. The problem is that although the bitcoin site does not always open with modern browsers like Google Chrome or Firefox, it always opens using the Lynx browser. The same peculiarity appears with some other web-sites. I was wondering what the reason could be for this but was not able to come up with any. Any ideas, or this is just coincidence?

    Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >