Search Results

Search found 14924 results on 597 pages for 'selector performance'.

Page 400/597 | < Previous Page | 396 397 398 399 400 401 402 403 404 405 406 407  | Next Page >

• What software can I use to pinpoint why Windows Server 2003 takes 15 seconds for any operation?

  - by Dr. Zim

  Ram is about 1/2 in use, four CPUs are all but idle. I tried "Microsoft Server Performance Advisor" with no luck. No entries in the Event Log for hardware failures, etc. And yet I can click on the start menu and wait 15 seconds for any new attempt. Launching software takes 30 seconds to respond. The server has an 8 drive WD RE 250 gig each Dell Perc 6 Sata raid array with Intel gigabit network cards. Anyone have any software titles that could analyze what is going wrong with this server?

  Read the article

• What is the difference between sar -B verses sar -W

  - by Mark

  I am trying to understand why my system is running slowly. I found the sar command, but wanted to know the difference between sar -B and sar -W I read the man page, and I understand that -B gives me the paging statistics and -W gives me the swapping statistics. What I would like to understand is the following: What is the correlation between the two sets of statistics. When should I be concerned about -B and when about -W? ie, what values from each command should I be concerned with? Which statistic is more closely related to system performance Thanks

  Read the article

• Website content hosted with Google. Good or bad?

  - by user305052

  I recently decided to host my styles.css and various scripts on Google Docs and link them into my website. I also have all my images hosted through Picasa so that they too will load much faster and consistently across users. My site has most of its traffic from Japan, Africa, and South America, so I assume there will be a performance boost for my users since my server is hosted in Hong Kong. I (in Canada) have measured my load times to be half of what they used to be. Basically it's a free CDN for my personal stuff. I'm not too sure about all of this yet, so here's my question: what are the caveats of this setup? EDIT: So after rummaging through the ToS of both Picasa and Docs, there doesn't seem to be anything wrong with this kind of use.

  Read the article

• Is ODBC on Windows 2003 slower than on Windows 7?

  - by nbolton

  I am seeing some MSSQL 2005 performance issues, and I am trying to diagnose the cause. I am using SQL profiler to gather query execution times. Both the client (using ODBC), and the SQL server are running on Windows 2003. I am also using Windows 7 (client) with a different Windows 2003 server to compare results. Windows 7 client / Windows 2003 server: SQL management studio: 393ms Through ODBC: 215ms Windows 2003 client: SQL management studio: approx 155ms Through ODBC: 3145ms ... in both cases, I'm running SQL management studio on the client. To me, these figures suggest there's something wrong with the ODBC client on the Windows 2003 server. On Windows, I see that the ODBC "SQL Server" driver is version 6.01.7600.16385 but on Windows 2003, it is 2000.86.3959.00 (by default). Could this be the problem? Is it possible to update an ODBC driver?

  Read the article

• Apple RAID configuration vs Hardware RAID

  - by James Hill

  I am researching external HDD's capable or RAID 1 to store a large amount of video content during overseas filming. After filming, the content will be brought back to the office and offloaded onto our storage server. After doing some research, I've found that I can buy an external drive with a built in RAID controller, or I can buy an external drive, with 2 HDD's, that I can configure in a RAID 1 array using the OS. RAID 1 is what we're looking for. I've done some reading on software RAID vs. hardware RAID, but the resources I've found don't discuss performance as it relates to video content or what happens to a software RAID when the computer dies. Question 1: Will the hardware RAID be more performant when dealing with large video files? Question 2: If the mac dies, does my RAID die with it (will my data be accessible on another mac)?

  Read the article

• email spam filering in bridging

  - by User4283

  I've a mail server, which handle multiple domains. Due to concern of spam and mail server performance. I've configured another machine which will be in bridging and mail server would be behind that it. How can i filter spam emails in bridging server without running any smtp services. Scenario Internet +------+ Spamfilter Server (in bridging mode) +---------+ MailServer SmartHost will work for outgoing email. In this scenario i can filter all incoming emails. There is also another option of DNS which i don't want to use.

  Read the article

• Achieving/maxing out 1GBPS connectivity on a nginx server

  - by Ansell Cruz

  This page (http://www.remsys.com/nginx-on-1gbps) claims that it can max out a 1gbps line using JBOD setup and no raid. Currently I'm on a 1gbps dedicated port and I'm on raid 10 (4x2TB - the disks that comes with 100tb.com servers). Currently I'm only peaking at 500-550mbps. wa% would show something around 20% everytime. I'm looking into maxing out this 1gbps port because I have an unmetered service from them. Do you guys think that the page that I referenced would be better than my current raid setup? Do you guys have any other suggestions on how to max out the performance of this server? TYI.

  Read the article

• 1000 HZ linux kernel necessary if I have tickless and high resolution timer?

  - by Bob

  I am trying to improve performance on my server. I have a few processes that need low jitter (less than 10ms variance). I have a load average of 4 maximum on an i7-920 (4 physical cores, 8 with HT). There are about 10 processes ranging from 40% to 90% of a core user mode. System usage is 3% total. Total CPU usage is 80% max. Will setting the kernel from 100hz to 1000hz improve the jitter if tickless and high resolution timers are already set? This page seems to indicate it still does something. https://lkml.org/lkml/2009/4/28/401 How about changing from voluntary (PREEMPT_VOLUNTARY) to preemptible (PREEMPT)?

  Read the article

• Experiences using VLC for video-on-demand streaming? (VLM)

  - by StackedCrooked

  I'm considering my options for implementing a VOD service. Until recently my choices seemed to be either Wowza or Darwin, but now I discovered VLM, which looks really cool. I am going to stream MPEG4 H.264 video with AAC audio. I'm probably going to use the RTSP protocol, but I'm willing to use HTTP as well (after reading this article). Can anyone comment on his or her experiences with VLM? How does it compare to Darwin or Wowza? Is it stable and worthy of production use? Are there any limitations or performance problems?

  Read the article

• IPsec Policy Agent flip-flopping demand start/auto start in Windows Server 2008?

  - by Steve Wortham

  Looking through the event logs on my web server I noticed a strange pattern. The following events have been occurring over and over again, always back to back: The start type of the IPsec Policy Agent service was changed from demand start to auto start. The start type of the IPsec Policy Agent service was changed from auto start to demand start. Each one produces event id 7040 from the Service Control Manager. And sometimes this will happen 20 times in one minute. Any idea what would cause this? I've been trying to pinpoint an intermittent performance problem for the past several days and this is the most peculiar thing I've found so far. I'm running Windows Server 2008, SQL Server 2008, and ASP.NET 3.5 w/ MVC 1.

  Read the article

• MacBook Pro - 72k vs 54k rpm drives - Heat and Noise

  - by webworm

  I am looking at a new 15" MacBook Pro for development purposes. I am planning to run a Virtual Machine for about 50% of my work (Windows 7 x64, IIS, SQL Server, and VS 2010). The upgrade from a 54000 rpm drive to a 72000 rpm is only $45. From what I understand the faster rotational speed of the 72000 rpm drive will help virtual machine performance. However, I am concerned that additional heat and fan noise might be an issue. I will be running mostly on A/C power so decreased battery life is not a major concern for me. Since I would be running with a Core i7 processor which gives off a fair amount of heat already I was wondering if it might be best to stay at 54000 rpm for the hard drive. What do you all think? Thanks!

  Read the article

• Does anybody wish to help a poor researcher publish a paper?

  - by Mihai Todor

  I don't know if this is a good place to beg for help, but here it goes: basically, I need to run a secure recommender system simulation (C++ console application) in order to meet tonight's deadline, and the faculty's server grid decided to go offline. I could really use something like 10+ (actually, about 16 would be required to meet the deadline) virtual instances of some Linux that has GMP installed... Ideally, they should all have the same specs, because a part of the simulation will represent performance benchmarks. If my question is inappropriate in any way, I kindly ask the administrators to remove it.

  Read the article

• wbadmin incremental system state backup

  - by user74513

  I am doing system state backups on a Windows Server 2008 R2 Enterprise (Service Pack 1) machine and expected the backups after the first one to be incremental. However with each backup a new directory with vhd files are created and the vhd files are almost the same size as the with the first backup. So the backups does not seem to be incremental. I used the following command to do the backup: wbadmin start systemstatebackup -backupTarget:f: I played around with the settings under "Configure Performance Settings" in the Windows Server Backup plugin in Server Manager but according to the description at the top of the dialog these settings are not applied to system state backups. Are there any settings available for wbadmin system state backup to make the backups incremental?

  Read the article

• Are there pitfalls to using incompatible RAM (frequencies) in motherboards?

  - by osij2is

  I'd like to use 2 x 4GB DDR3 1600 dimms in a motherboard capable of only DDR3 1066. The DDR3 1600 is on sale and the cost is identical to 1066 dimms. It'd be nice to have these faster sticks around should i upgrade the motherboard. I assume the RAM can under clock itself or be changed in the BIOS. While obviously it's less than ideal situation, I don't know if there are other unintended consequences in terms of stability, performance and longevity of the board and said RAM. Am I doing any damage to the memory controller or RAM? I've always bought RAM at the max speed specified for the motherboard and I've never gone over so I'm not sure if there any caveats to this at all. Edit: I intend to use the RAM in pairs. I know that mixing RAM speeds is just a bad idea.

  Read the article

• Buying Dual Monitors of different size and resolution

  - by rutherford

  I'm about to go choose a dual monitor setup: 1) Is there any reason why I can't just walk out and buy the two TFT screens I like (a wide screen and a 'portrait' screen) and combine them? Mainly wide screen would be for gaming, and portrait for browsing. I'd want the desktop stretching from one to the other (ie drag pointer, apps from one screen to the other) 2) Also do I need separate gfx cards for each monitor or can one cover both? any performance cost? 3) And can I have separate background images for each, seeing as they'll be different resolutions?

  Read the article

• Web application and remote storage of files

  - by Matt

  Hi have a web application that can store lots and lots of files on the server. i.e. users upload data to it. The files are stored below a particular storage path. The web host will be an IBM xseries 345. However, the disks are really expensive so we would like to put the files onto a less expensive server. Now here is the question. Should I use an NFS mount on the IBM server of a path on the storage server? Or should I write some scripts to upload the files to the storage server instead. Both the storage server and the web host are on the same network. Only the web server is visible to the world. Is NFS performance suitable for an expected low to moderately loaded server?

  Read the article

• What are the limitations of virtual machines?

  - by j-g-faustus

  I'm considering setting up a virtual machine running Windows, with Ubuntu 10.10 as the host OS, for those cases where I have a Windows-only program. I understand that using a VM will lose some performance, but are there other limitations to what the OS in a virtual machine can do compared to "running on bare metal"? For example: Can a VM play games, like Dragon Age Origins or Civilization V? (Possibly with poorer framerates and/or lower resolution, but does it play at all?) Can a VM rip DVD/Blue-ray using AnyDVD or similar Windows program? Can a VM handle new hardware that requires dedicated drivers, but the drivers are only available for the OS running inside the VM? (Ex. graphics card, digital camera, card reader for smart card authentication.) Is it possible to say anything about "general limitations" of VMs, or is this wholly dependent on the specific VM?

  Read the article

• setting up/installing/configuring nginx LEMP stack on fresh VPS server

  - by Grant Tailor

  I need some help in settingup/installing and configuring nginx LEMP stack on a fresh new VPS I have. The specs of the CentOS 5.7 VPS are 2GB DDR3 ECC RAM(4GB burst), 1 core 1.5Ghz(3Ghz burst) and 100GB RAID 10 storage, unmetered bandwidth @ 100Mpbs all for a whopping $25/month(unbeatable, yeah I know :) Anyways I have followed this LEMP (will also need MySQL and PHP) stack guide on linode http://library.linode.com/lemp-guides/centos-5 but basically what I want is to be able to host multiple website on this webserver after everything is setup. I am used to using DirectAdmin control panel on other server and want to have things setup so I can host multiple websites - mostly wordpress and drupal themes. Lets say 10 websites on this nginx web server. So can someone please help me on what I need to do to take "full" advantage of nginx power and performance, while been able to easily manage these multiple websites (wordpress and drupal themes)?

  Read the article

• How to re-do the hard disks in a WD Word Book Edition II ?

  - by jfmessier

  I recently purchased a WD World Book II, a 2 TB one. I call it the "White Box". It has those 2 1TB drives, and they were in this RAID 1 config, only giving me about 1 TB. I could not delete the raid array, and I took the drives in a Linux box. But I also deleted the entire partitions of the disks, and I cannot even et the existing RAID array on this WD White Box. The drives are fine, but I cannot get them to work on the WD White Box. My goal was to get back to a real 2 TB storage space. If I cannot get those drives back in the White Box, I can re-use them elsewhere, but this would mean a waste of the firmware and network connection. After the fact, I read that, anyway, the network performance is rather poor. Thanks :-)

  Read the article

• XKB - remap arrow keys and preserve shift behaviour to select text

  - by dgirardi

  I realize arrow key remapping is an old problem, however I cannot seem to find a good solution that lets me select text with SHIFT + remapped keys as I would do with the vanilla arrow keys. For instance, if I remap Caps Lock to ISO_Level3_Shift and set xkb_symbols to read either key <AC08> { [ k, K , Down, Down] }; or key <AC08> { type="THREE_LEVEL", [ k, K , Down ] }; Pressing Shift+CapsLock+K will behave exactly as CapsLock+K (while Shift+Down behaves differently from Down alone). I had somewhat more success using higher level macro utilities and generating keyboard events (i.e. generate both the shift and the arrow keypresses); hoever that approach has a whole set of different problems - often the UI response to a simulated keypress is different from the "real" keypress, and there are performance problems as well - I can type faster than the thing can handle. Tl;dr; how can you shift-select using remapped arrow keys under X?

  Read the article

• TCP Tweaking options and Results: Any suggestions?

  - by krishnakumar

  I first tried with the default windows XP TCP option(It doesn't have TCPWindowSize option and TCP1323 in its Registry setting). I dynamically set those options using TCP optimizer. Here I list out the result with and without TCP Tweaking option. I see no major improvements in TCP after increasing window size optimally too. What value should I set to increase the performance? Results: Without any window size and MTU setting from server to client (receiving) TCPWindowSize : MTU : TTL: Size:586 MB total duration : 03:47 With window size extension from server to client (receiving) Bandwidth :100 Mbps Latency: 100ms BDP :1250000 TCPWindowSize : 1250000 MTU :1500 TTL:128 Size:586MB total duration : 03:44 With window size extension from server to client (receiving) TCPWindowSize :64240 MTU :1500 TTL :112 Size: 586MB total duration : 03:49

  Read the article

• Windows Experience Index Dropped After Adding Dedicated Graphics Card

  - by Ludo

  I purchased a new PC with a Gigabye Z68X-UD3H-B3. I had a Radeon HD 5450 graphics card spare, so I've added that instead of using the onboard graphics as I just presumed it would be better. But, my windows experience index has gone down. From 5.4 to 5. Dekstop Performance has dropped from 5.4 to 5, although gaming graphics has gone up from 5.9 to 6.2. I'm not actually going to be using the machine for gaming, just audio production, but I added the card as I'll possibly be doing video editing in future too. Why would this be? Can I trust windows experience index scores? Or is it possible the onboard stuff is just better for general desktop stuff? Thanks! Ludo.

  Read the article

• How to change XFCE to LXDE?

  - by kurp

  I've just installed LinuxMint XFCE, which seems to be still a bit to heavy for my hardware. Thus, I'm thinking about LXDE installation and wonder if a new Linux installation is necessary/advised in such case. The question is: how to switch easily? The additional questions are: a) is it necessary to remove the XFCE packages or both DEs may be installed at the same time? b) is there any way to simply switch between DEs (i.e. have both DEs available and boot with DE selected each time)? c) are there any performance consequences of having more than one DE installed? it means: is clean LXDE installation faster than Linux with 2 separate desktops?

  Read the article

• RAID0 array of USB 2 disks, both connected to a single hub. Any benefit?

  - by Josh

  I have two unused USB 2 drives. I wanted to stripe them in a RAID0 configuration for fast disk access for virtual machines. (I find running a VMware virtual machine off a USB2 drive to be painfully slow. Especially Windows Vista) If I have both USB drives attached to the same USB2 hub, will that negate any benefit I gain by creating a RAID0 array? That is to say, is the speed of USB2 the limiting factor or is the speed of the drives? Would I get better performance by attaching one or both drives directly to my computer?

  Read the article

• Deep freeze alternative for Ubuntu

  - by Nrew

  I made some research and found out that Deep freeze is not available for ubuntu. Is there a software like deep freeze for Ubuntu 10.04. To prevent writing data on the disk. I need this so that I could try all sorts of stuff on Ubuntu without worrying if I could damage the Windows installation that is installed along side with it. Virtual box is good. But the performance is not. Because I only have 2gb of ram.

  Read the article

< Previous Page | 396 397 398 399 400 401 402 403 404 405 406 407  | Next Page >