Search Results

Search found 17870 results on 715 pages for 'screen resolution'.

Page 401/715 | < Previous Page | 397 398 399 400 401 402 403 404 405 406 407 408  | Next Page >

• ubuntu 11.10 CellC data card

  - by Armien

  In 11.10 I find that I can connect to the internet via broadband connection successfully. The problem is that I cannot have the data card attached to the machine while the machine boots up. If I leave the data card in the machine during startup, the data card is not picked up and I then cannot connect to the internet. I must first boot up my machine, login, attach the data card into the usb port, wait so 30 seconds. The broadband connection name will then appear in the network dropdown at the top of the screen. An internet connect is now possible via broadband. Please let me know what must be done to fix this. Thanks Armien

  Read the article

• After reinstalling ATI graphics drivers, my keyboard and mous aren't working anymore

  - by Lifelike27

  On Ubuntu 11.04 I tried to install the open source drivers for my laptops ATI Mobility Radeon 5470M but I messed that up a bit and lost xserver. Now I've managed to solve that problem with this and by downloading the ATI proprietary drivers and install those manually. Now, when Ubuntu loads up I get to the login screen but I can't use my mouse or my keyboard (usb keyboard and mouse doesn't work either). If I use the recovery console, then login with that and then run 'startx'. I can login fine (though Unity doesn't show, the graphics seem to be working because it shows the fading animation of libnotify), but I can't type or move my mouse.

  Read the article

• Arranging Gizmos in Unity 3D [on hold]

  - by Simran kaur

  I have this arrangement of Gizmos which was handed over to me. ! 1. How do I get it? I have read the documentation but I could get it as shown. I have basically track or lane that is coming towards the camera by moving towards negative z. I am moving lanes so that it appears as if cars are moving, The roads need to be rotated by 90 degrees otherwise they appear to move towards the upper end of the screen and that too parellely.Why exactly is that?

  Read the article

• Ubuntu 12.10 live-usb won't boot

  - by user109175

  I own an Aleutia "Tango" low power PC. It uses a Intel Atom CPU N2800 @1.86GHz processor. I know there are Linux issues with the "Cedar Trail" graphics on this hardware but I can happily run Ubuntu 12.04 using the VESA graphics driver. I wanted to try out Ubuntu 12.10 so I created a live USB under 12.04 but I am unable to get this to boot. It gets as far as the Grub screen but after that the monitor shuts down. I have tried the F6 "nomodeset" option but that doesn't make any difference. Does anyone have any knowledge of this problem? Thanks in advance.

  Read the article

• MIX10 Windows Phone 7 Content Overview

  The tools available at MIX 10 and for public download are a Community Technology Preview, while not feature complete, the tools release at MIX 10 ships with a robust set of functionality. The white papers provide guidance on architecture, development, as well as design. In addition there are code samples and hands-on-labs that cover key topics such as Silverlight, the application bar, splash screen, navigation model, and XNA Game Studio. Training available now: Charles Petzolds preview of Programming...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Ask the Readers: How Do You Get Stuff Done Outdoors?

  - by Jason Fitzpatrick

  Temperatures are rising, there’s more sunshine to be had, and many office workers are getting the itch to work outside. This week we’re interested in hearing your tips and tricks for working productively and comfortably outside. As fun as it is to work outside and enjoy some sunshine, fresh air, and a change of scenery, transplanting yourself outside your office comes with it’s own set of challenges. This week we want to hear all about your tips and tricks for working outside. How do you keep your screen visible and crisp? Work away from outlets? Minimize the amount of gear you have to haul around? Sound off in the comments with your work-outdoors-advice and then check back in on Friday for the What You Said roundup. HTG Explains: What Is RSS and How Can I Benefit From Using It? HTG Explains: Why You Only Have to Wipe a Disk Once to Erase It HTG Explains: Learn How Websites Are Tracking You Online

  Read the article

• CentOS 5 : error in installing php-imap

  - by TMMDev

  can someone please help me with this CentOS 5 question? I am trying to install php-imap, i tried yum install php-imap but I am getting the following output: Loaded plugins: fastestmirror, priorities, security Loading mirror speeds from cached hostfile * base: centos.hostingxtreme.com * epel: mirror.steadfast.net * extras: mirror.team-cymru.org * updates: mirror.beyondhosting.net Setting up Install Process Resolving Dependencies --> Running transaction check ---> Package php-imap.x86_64 0:5.1.6-44.el5_10 set to be updated --> Processing Dependency: php-common = 5.1.6-44.el5_10 for package: php-imap --> Finished Dependency Resolution php-imap-5.1.6-44.el5_10.x86_64 from updates has depsolving problems --> Missing Dependency: php-common = 5.1.6-44.el5_10 is needed by package php-imap-5.1.6-44.el5_10.x86_64 (updates) Error: Missing Dependency: php-common = 5.1.6-44.el5_10 is needed by package php-imap-5.1.6-44.el5_10.x86_64 (updates) You could try using --skip-broken to work around the problem You could try running: package-cleanup --problems package-cleanup --dupes rpm -Va --nofiles --nodigest The program package-cleanup is found in the yum-utils package. I already have php-common installed, I ran "yum install php-common" and got the following output Loaded plugins: fastestmirror, priorities, security Loading mirror speeds from cached hostfile * base: centos.hostingxtreme.com * epel: mirror.steadfast.net * extras: mirror.team-cymru.org * updates: mirror.beyondhosting.net Setting up Install Process Package matching php-common-5.1.6-44.el5_10.x86_64 already installed. Checking for update. Nothing to do how can I fix this problem?

  Read the article

• Can't load any applications

  - by oshirowanen

  After installing Eclipse, I wanted to try to enable the global unity menu for Eclipse. Following a guide on the web, I was to make a change to: sudo nano /usr/lib/gtk-2.0/2.10.0/menuproxies/libappmenu.so by changing Eclipse to Xclipse. After making that change, and then running sudo ldconfig. and even restarting, I can no longer open any application. I just see the application appear on the screen for a split second and then it disappears. So far I have noticed that I can no longer load Eclipse and Chrome. Anyone know how to fix this? I have tried changing Xclipse back to Eclipse and running the command sudo ldconfig, but it makes no difference.

  Read the article

• I go to www.facebook.com, but a completely different site appears.

  - by Rosarch

  I am going to www.facebook.com, but the site that appears is totally different. This occurs on Chrome 6+, IE9, and FF 3+. What could be happening? Is this a security risk? Facebook was working just fine, then all of a sudden this happened. Update: The same problem occurs on my netbook. Update 2: When I go to http://69.63.189.11/, it works fine. So... DNS problem? How do I fix? Update 3: Checked the hosts file: # Copyright (c) 1993-2009 Microsoft Corp. # # This is a sample HOSTS file used by Microsoft TCP/IP for Windows. # # This file contains the mappings of IP addresses to host names. Each # entry should be kept on an individual line. The IP address should # be placed in the first column followed by the corresponding host name. # The IP address and the host name should be separated by at least one # space. # # Additionally, comments (such as these) may be inserted on individual # lines or following the machine name denoted by a '#' symbol. # # For example: # # 102.54.94.97 rhino.acme.com # source server # 38.25.63.10 x.acme.com # x client host # localhost name resolution is handled within DNS itself. # 127.0.0.1 localhost # ::1 localhost Looks like it hasn't been altered.

  Read the article

• Confusion on HLSL Samplers. Can I Set Samplers Inside Functions?

  - by Kyle Connors

  I'm trying to create a system where I can instance a quad to the screen, however I've run into a problem. Like I said, I'm trying to instance the quad, so I'm trying to use the same geometry several times, and I'm trying to do it in one draw call. The issue is, I want some quads to use different textures, but I can't figure out how to get the data into a sampler so I can use it in the pixel shader. I figured that since we can simply pass in the 4 bytes of our IDirect3DTexture9* to set the global texture, I can do so when passing in my dynamic buffer. (Which also stores each objects world matrix and UV data) Now that I'm sending the data, I can't figure how to get it into the sampler, and I really want to assume that it's simply not possible. Is there any way I could achieve this?

  Read the article

• Why does my RAID configuration with mdadm fail on reboots?

  - by Andy B

  I have been running Ubuntu server on my machine for 2 years and it has worked ok. I would like to speed it up by raiding a few drives. The machine is used to host my Mysql databases internally. using MDADM raid.. I have tried 2 schemes so far with the 3 drives. 2 partitions on each drive 1 for the swap 1 for the O/S both of them turned into drives raid level 5 3 partitions on each drive 1 for the boot 1 for the swap and 1 for the root. The boot I set to raid level1 and the swap and root raid drives were set to level5 Both setup worked fine for about a week, then on a reboot things fall apart. by fall apart I mean I end up with a bunch of hard drive errors on the screen and then get a grub prompt. Why do they fail on reboots? I am eager to understand what I am doing wrong thanks!

  Read the article

• eGalax Touchscreen not working Jolicloud 1.2

  - by craigsmith86

  I have an eGalax touchscreen on an Acer Aspire One running Jolicloud 1.2 I have had success getting this touchscreen to work correctly on ubuntu 10.04NBR, 11.04 and Kubuntu 12.04 and Puppy Linux, so I am pretty happy with how it SHOULD be done. However, I cannot get it to calibrate correctly or remember calibration settings. I have installed the eGalax utility (all available versions) and it does not recognize the screen. Xinput_calibrator works but the config cannot be made permanent. Problems I have identified: -Joli doesn't have an xorg.conf file and does not use xorg.conf.d for evdev configuration -Setting configs through Hal doesn't work anymore The best I can get is a poorly adjusted touchscreen with a reversed Y axis. Any help greatly appreciated

  Read the article

• Windows 7 doesnt boot after installing Ubuntu 12.10 (Asus Zenbook Prime / UEFI problem)

  - by jpdus

  Today I installed Ubuntu and since then i cannot boot into Windows anymore. I used the "standard" option (didnt change any partitions manually, just entered the size) but used the UEFI-mode. At first the GRUB entries for Windows did not work at all, after reading this thead i was able to add a new Grub entry - now i can get into the "windows-loading" screen for a few seconds but then i always see some kind of bluescreen for a fraction of a second and the laptop reboots. I can get into the windows recovery partition but the only option there is to reset everything to factory settings (+erase all data). I have no idea how to get into the Windows 7 repair mode which was mentioned here (tried everything else in this thread too - no success). My boot info can be found here: http://paste.ubuntu.com/1411573/ I have no idea what went wrong (there is even an extra page for the Zenbook Prime where no installation problems are mentioned). I would appreciate any help/ideas, many thanks!

  Read the article

• Trying to boot from usb

  - by iron

  I have similar issues but none with the 12.04 build. Im trying this on a dell d610 laptop with a bad hard drive and was told i could just directly boot from the usb drive. Im using an 8g usb drive and i have tried using the uui tool and get this message. SYSLINUX 4.06 EDD 4.06-pre1 Copyright (c) 1994-2011 H.Peter Anvinet al ERROR: No configuration file found No DEFAULT or UI configuration directive found! Then i tried using unetbootin and got the bootup screen with only the default option and it would say auto boot with a 10 sec countdown and start over again. I do have the boot sequence for usb first.

  Read the article

• Unity greeter background not changing for users automatically after upgrade

  - by bioShark

  I have recently upgraded from 11.10 to 12.04. Normal upgrade, no new installation. In 11.10 I was using Simple LightDM Manager tool to set a custom wallpaper on the login screen. This tool unfortunately doesn't seem to do anything since I have upgraded. I have also heard that 12.04 is suppose to have this feature (changing login wallpaper per different user) by default. I have searched in settings but unfortunately in vain. So, to keep it short, could somebody direct me to the option(s) page where I can make the desired changes.

  Read the article

• Gnome shell crashing in 11.10 with 'purple haze' effect

  - by Andy

  I've just got Gnome with 11.10 up and running with my netbook and liked it so much I thought I'd get my parents old machine sorted with Ubuntu too. Unity works fine but when I try to switch to Gnome shell, I get problems. On login, the wallpaper appears as normal but then the colour bleeds out from the centre, leaving traces of it around the edge in a purple haze (yes, I do like Jimi Hendrix but I'm not making this up). When I go to applications, typing then pressing enter in the search field dumps me out so there's nothing but File / Edit / View etc in top left; starting a program seems to work but then there's only a white screen and no program window. Gnome classic works fine, from the limited use I've given it. I'm using an Asus desktop with ABIT motherboard, 2.6ghz with 1gb RAM; I've checked drivers and it says I'm up to date, Nvidia graphics. Anyone any ideas?

  Read the article

• Unable to connect to second name of Windows 2008 Server R2 machine from XP

  - by Tumba

  I used the command netdom computername /add:newname.domainname.com to add a second name to a server running Windows 2008 Server R2. After restarting the server, I had DNS "A" entries for both names. In addition, the second name was added to HKLM\SYSTEM\CurrentControlSet\services\LanmanServer\Parameters\OptionalNames, which I believe should have taken care of any NetBIOS resolution. From my Windows 7 workstation, I can ping both names and running net view on both names reveals the same list of resources. From Windows XP, I can ping both names, but net view only works on the first name. Running net view on the second name returns: System error 52 has occurred. You were not connected because a duplicate name exists on the network. Go to System in Control Panel to change the computer name and try again. What do I need to do to make the second name usable from XP clients? Update: I was able to resolve the problem by adding the REG_DWORD key DisableStrictNameChecking = 1 to HKLM\SYSTEM\CurrentControlSet\services\LanmanServer\Parameters, then restarting the Server service. However, I do not understand why this was necessary.

  Read the article

• bxslider and sproutvideo on iPad: video is just a black box when returning to slide [on hold]

  - by hm.

  I use sproutvideo inside of bxslider. I teste it well on chrome and firefox. On the iPad I have the following issue: I have the video in the forst screen and it loads fine, the slider stops when the video is running and when i switch to another slide and come back the video is still running. On the iPad, the video starts also, but when I go to anoter slide and back, the video disappears and I only see a black box. Any ideas what can be wrong?

  Read the article

• How can menu bars that require a right click be activated like Ubuntu versions <10.10?

  - by Amos Annoy

  I've noticed that NetworkManager only has a single, left or right, click menu and no longer has an About menu option to show it's splash screen. In fact all the top bar mini short cut icons have been amputated and crippled leaving them with no rights. This severely impacts on our custom aps., similar to FireFox bookmarks, which can no longer be right clicked to bring up a context menu. It is possible to disengage FF's File|Edit|... menu bar from the top by running it in safe-mode so the menu bar is resident in a window, restoring right clicks, but our aps. do not have "safe modes". How can right clicks in menu bars be restored? reference

  Read the article

• How do I reset my display settings from the command line?

  - by Trevor

  I'm running 12.10 on a dell e5400 laptop and I used xrandr to get the dual monitors working that I connect through a laptop dock. I used xrandr again to switch back to the laptop display when I undocked. The problem is, after a restart, the laptop seems to want to come back up with the dual monitor configuration and the laptop screen stays blank. I can boot into single user mode but I'm not sure what to do from there to get the display settings reset. Any ideas? There's no xorg.conf file so I'm not sure where the settings are stored anymore. Thanks.

  Read the article

• Documenting user interfaces in a mouse-less touch UI

  - by Daniel Cazzulino

  “Old” apps rely on mouse pointing and tooltips to explain what a given button is for. Maybe there is text associated with the button, but you can only put so much text without wasting useful screen state. More so in a phone or tablet app. I’ve seen a trend in Google apps where they put an overlay on top of the app the first time it runs, to explain how the various pieces of UI work. I have seen this also on my Nexus phone, but don’t have a screenshot. I don’t recall a way to actually bring that help overlay back again, so that’s maybe some built-in gesture that’s missing. Here’s what it looks like in Gmail, the first time you use the new compose layout:   I like the approach very much, and I think it’s something that should become standard part of mobile OS, and Windows, including a standard way to bring that help up from within any app....Read full article

  Read the article

• How to remove shells?

  - by MyNameIs...

  I installed few shells that I wanted to try out on Ubuntu 12.04, but none of them worked at all. It could be that I installed them all at the same time, meaning the OS didn't get a chance to work everything out, but either way, they didn't work. I would now like to remove them. The one's that I installed are Fluxbox, OpenBox, XFCE, and MATE. I installed them through the help of this site. Everything seemed to have been working properly until I actually tried to use the shells and nothing loaded at all. Except for Fluxbox, I think that one worked. I want to know of any way to repair or perhaps just remove the packages entirely. I might have already removed them because I did the apt-get remove command on all of them, but they were still in the list on the login screen.

  Read the article

• How to implement the light trails for a tron game?

  - by Link

  Well I was creating a TRON style game, but had an issue with creating the actual light trails for the game. What I'm doing currently is I have an array the same size as my window in pixel size, implemented like this: int* collision[800][600]; Then when the bike goes on a certain pixel, it is marked with a 1 for traveled on. However what is the most efficient way to create a working light trail display? I tried to do something like this: int i, j; for(i=0; i<800; i++) for(j=0; j<600; j++) if(*collision[i][j] == 1) Image::applySurface(i, j, trailSurface, gameScreen); But it isn't working properly? It just fills the whole screen with a sprite instead. Whats a better/faster/working way to do this?

  Read the article

• Adjust brightness and contrast?

  - by Anon58

  I have an acer aspire as5750. With the intel hd 3000 graphics. When i use the adjustment function keys the dial moves but it doesn't translate to the screen diming. Same with the dial in linux settings. Also in colour settings it seems there is no colour file or icc profile available for this laptop. Do you think if i can get a working icc profile then it will fix this or not? I have found something that could work:Argyll but it looks complicated to use, has anyone here used it? Would it allow me to dim? Or is there any other work around? I have searched lots but can't find a solution.

  Read the article

• Problem installing LibreOffice; please help!

  - by EmmyS

  I followed the instructions for installing LibreOffice found here, which are basically the same instructions found all over askubuntu and the web in general. I followed the instructions (including removing OO first) for gnome; all that is in my Applications menu now is LibreOffice (OO used to have OpenOffice Spreadsheet, OpenOffice Presentation, etc.) When I open LibreOffice, I get the splash screen/menu, but all of the choices for creating new docs are greyed out. It also will not open any office/type files (no errors; they just don't open.) The terminal commands indicated that installation was successful, but obviously something is missing. I'm guessing I can just reinstall OO from the software center, but I'd really like to give LibreOffice a try, given the lack of ongoing development on OO. Can anyone help me out?

  Read the article

< Previous Page | 397 398 399 400 401 402 403 404 405 406 407 408  | Next Page >