Search Results

Search found 48846 results on 1954 pages for 'system exit'.

Page 401/1954 | < Previous Page | 397 398 399 400 401 402 403 404 405 406 407 408  | Next Page >

  • Monitoring UDP socket in glib(mm) eats up CPU time

    - by Gyorgy Szekely
    Hi, I have a GTKmm Windows application (built with MinGW) that receives UDP packets (no sending). The socket is native winsock and I use glibmm IOChannel to connect it to the application main loop. The socket is read with recvfrom. My problem is: this setup eats 25% percent CPU time on a 3GHz workstation. Can somebody tell me why? The application is idle in this case, and if I remove the UDP code, CPU usage drops down to almost zero. As the application has to perform some CPU intensive tasks, I could image better ways to spend that 25% Here are some code excerpts: (sorry for the printf's ;) ) /* bind */ void UDPInterface::bindToPort(unsigned short port) { struct sockaddr_in target; WSADATA wsaData; target.sin_family = AF_INET; target.sin_port = htons(port); target.sin_addr.s_addr = 0; if ( WSAStartup ( 0x0202, &wsaData ) ) { printf("WSAStartup failed!\n"); exit(0); // :) WSACleanup(); } sock = socket( AF_INET, SOCK_DGRAM, 0 ); if (sock == INVALID_SOCKET) { printf("invalid socket!\n"); exit(0); } if (bind(sock,(struct sockaddr*) &target, sizeof(struct sockaddr_in) ) == SOCKET_ERROR) { printf("failed to bind to port!\n"); exit(0); } printf("[UDPInterface::bindToPort] listening on port %i\n", port); } /* read */ bool UDPInterface::UDPEvent(Glib::IOCondition io_condition) { recvfrom(sock, (char*)buf, BUF_SIZE*4, 0, NULL, NULL); /* process packet... */ } /* glibmm connect */ Glib::RefPtr channel = Glib::IOChannel::create_from_win32_socket(udp.sock); Glib::signal_io().connect( sigc::mem_fun(udp, &UDPInterface::UDPEvent), channel, Glib::IO_IN ); I've read here in some other question, and also in glib docs (g_io_channel_win32_new_socket()) that the socket is put into nonblocking mode, and it's "a side-effect of the implementation and unavoidable". Does this explain the CPU effect, it's not clear to me? Whether or not I use glib to access the socket or call recvfrom() directly doesn't seem to make much difference, since CPU is used up before any packet arrives and the read handler gets invoked. Also glibmm docs state that it's ok to call recvfrom() even if the socket is polled (Glib::IOChannel::create_from_win32_socket()) I've tried compiling the program with -pg and created a per function cpu usage report with gprof. This wasn't usefull because the time is not spent in my program, but in some external glib/glibmm dll.

    Read the article

  • MVC 3 ModelView passing parameters between view & controller

    - by Tobias Vandenbempt
    I've been playing with MVC 3 in a test project and have the following issue. I have Group & Subscriber entities and those are coupled through a SubscriberGroup table. Using the DetailView of Group I open a view of SubscriberGroup containing all subscribers. This list has the option to filter. So far it all works, however when I call the AddToGroup method on the controller it fails. Specifically it goes into the method but doesn't pass the subscriberCheckedModels list. Am I doing something wrong? View: SubscriberGroup Index.aspx <%@ Page Title="" Language="C#" MasterPageFile="~/Views/Shared/Site.master" Inherits="System.Web.Mvc.ViewPage<Mail.Models.SubscriberCheckedListViewModel>" %> … <h2 class="common-box-title"> Add Subscribers to Group</h2> <p> <% using (Html.BeginForm("Index", "SubscriberGroup")) { %> <input name="filter" id="filter" type="text" /> <input type="submit" value="Search" /> <%} %> </p> <% using (Html.BeginForm("AddToGroup", "SubscriberGroup", Model,FormMethod.Get, null)) { %> <fieldset> <div style="display: inline-block; width: 70%; vertical-align: top;"> <% if (Model.subscribers.Count() != 0) { %> <table class="hor-minimalist-b"> <tr> <th> Add To Group </th> <th> Full Name </th> <th> Email </th> <th> Customer </th> </tr> <% foreach (var item in Model.subscribers) { %> <tr> <td> <%= Html.CheckBoxFor(modelItem => item.AddToGroup)%> </td> <td> <%= Html.DisplayFor(modelItem => item.subscriber.LastName)%> <%= Html.ActionLink(item.subscriber.FirstName + " " + item.subscriber.LastName, "Details", new { id = item.subscriber.SubscriberID })%> </td> <td> <%: Html.DisplayFor(modelItem => item.subscriber.Email)%> </td> <td> <%: Html.DisplayFor(modelItem => item.subscriber.Customer.Company)%> <%= Html.HiddenFor(modelItem => item.subscriber) %> </td> </tr> <% } %> <% ViewBag.subscribers = Model.subscribers; %> probeersel <%= Html.HiddenFor(model => model.subscribers) %> probeersel </table> <%} %> <%else { %> <p> No subscribers found.</p> <%} %> <input type="submit" value="Add Subscribers" /> </div> </fieldset> <%} %> Controller: SubscriberGroupController using System; using System.Collections.Generic; using System.Linq; using System.Web; using System.Web.Mvc; using System.Web.Security; using Mail.Models; namespace Mail.Controllers { public class SubscriberGroupController : Controller { private int groupID; private MailDBEntities db = new MailDBEntities(); // // GET: /SubscriberGroup/ public ActionResult Index(int id) { groupID = id; MembershipUser myObject = Membership.GetUser(); Guid UserID = Guid.Parse(myObject.ProviderUserKey.ToString()); UserCustomer usercustomer = db.UserCustomers.Single(s => s.UserID == UserID); var subscribers = from subscriber in db.Subscribers where (subscriber.CustomerID == usercustomer.CustomerID) | (subscriber.CustomerID == 0) select new SubscriberCheckedModel { subscriber = subscriber, AddToGroup = false }; SubscriberCheckedListViewModel test = new SubscriberCheckedListViewModel(); test.subscribers = subscribers; return View(test); } [HttpPost] public ActionResult Index(string filter) { MembershipUser myObject = Membership.GetUser(); Guid UserID = Guid.Parse(myObject.ProviderUserKey.ToString()); UserCustomer usercustomer = db.UserCustomers.Single(s => s.UserID == UserID); var subscribers2 = from subscriber in db.Subscribers where ((subscriber.FirstName.Contains(filter)|| subscriber.LastName.Contains(filter)) && (subscriber.CustomerID == usercustomer.CustomerID || subscriber.CustomerID == 0)) select new SubscriberCheckedModel { subscriber = subscriber, AddToGroup = false }; SubscriberCheckedListViewModel test = new SubscriberCheckedListViewModel(); test.subscribers = subscribers2.ToList(); return View(test); } [HttpPost] public ActionResult AddToGroup(SubscriberCheckedListViewModel test) { //test is null return RedirectToAction("Details", "Group", new { id = groupID }); } } } ViewModel: SubscriberGroupModel using System.Collections.Generic; using Mail; namespace Mail.Models { public class SubscriberCheckedModel { public Subscriber subscriber { get; set; } public bool AddToGroup { get; set; } } public class SubscriberCheckedListViewModel { public IEnumerable<SubscriberCheckedModel> subscribers { get; set; } } }

    Read the article

  • I'd like to know why a function executes fine when called from x but not when called from y

    - by Roland
    When called from archive(), readcont(char *filename) executes fine! Called from runoptions() though, it fails to list the files "archived"! why is this? The program must run in terminal. Use -h as a parameter to view the usage. This program is written to "archive" text files into ".rldzip" files. readcont( char *x) should show the files archived in file (*x) a) Successful call Use the program to archive 3 text files: rldzip.exe a.txt b.txt c.txt FILEXY -a archive() will call readcont and it will work showing the files archived after the binary FILEXY will be created. b) Unsuccessful call After the file is created, use: rldzip.exe FILEXY.rldzip -v You can see that the function crashes! I'd like to know why is this happening! /* Sa se scrie un program care: a) arhiveaza fisiere b) dezarhiveaza fisierele athivate */ #include<stdio.h> #include<stdlib.h> #include<conio.h> #include<string.h> struct content{ char *text; char *flname; }*arc; FILE *f; void readcont(char *x){ FILE *p; if((p = fopen(x, "rb")) == NULL){ perror("Critical error: "); exit(EXIT_FAILURE); } content aux; int i; fread(&i, sizeof(int), 1, p); printf("\nFiles in %s \n\n", x); while(i-- >1 && fread(&aux, sizeof(struct content), 1, p) != 0) printf("%s \n", aux.flname); fclose(p); printf("\n\n"); } void archive(int argc, char **argv){ int i; char inttext[5000], textline[1000]; //Allocate dynamic memory for the content to be archived! arc = (content*)malloc(argc * sizeof(content)); for(i=1; i< argc; i++) { if((f = fopen(argv[i], "r")) == NULL){ printf("%s: ", argv[i]); perror(""); exit(EXIT_FAILURE); } while(!feof(f)){ fgets(textline, 5000, f); strcat(inttext, textline); } arc[i-1].text = (char*)malloc(strlen(inttext) + 1); strcpy(arc[i-1].text, inttext); arc[i-1].flname = (char*)malloc(strlen(argv[i]) + 1); strcpy(arc[i-1].flname, argv[i]); fclose(f); } char *filen; filen=(char*)malloc(strlen(argv[argc])+1+7); strcpy(filen, argv[argc]); strcat(filen, ".rldzip"); f = fopen(filen, "wb"); fwrite(&argc, sizeof(int), 1, f); fwrite(arc, sizeof(content), argc, f); fclose(f); printf("Success! "); for(i=1; i< argc; i++) { (i==argc-1)? printf("and %s ", argv[i]) : printf("%s ", argv[i]); } printf("compressed into %s", filen); readcont(filen); free(filen); } void help(char *v){ printf("\n\n----------------------RLDZIP----------------------\n\nUsage: \n\n Archive n files: \n\n%s $file[1] $file[2] ... $file[n] $output -a\n\nExample:\n%s a.txt b.txt c.txt output -a\n\n\n\nView files:\n\n %s $file.rldzip -v\n\nExample:\n %s fileE.rldzip -v\n\n", v, v, v, v); } void runoptions(int c, char **v){ int i; if(c < 2){ printf("Arguments missing! Use -h for help"); } else{ for(i=0; i<c; i++) if(strcmp(v[i], "-h") == 0){ help(v[0]); exit(2); } for(i=0; i<c; i++) if(strcmp(v[i], "-v") == 0){ if(c != 3){ printf("Arguments misused! Use -h for help"); exit(2); } else { printf("-%s-", v[1]); readcont(v[1]); } } } if(strcmp(v[c-1], "-a") == 0) archive(c-2, v); } main(int argc, char **argv) { runoptions(argc, argv); }

    Read the article

  • Linux c++ error: undefined reference to 'dlopen'

    - by lerax
    Hi all! I work in Linux with c++ (eclipse) and want to use a library. Eclipse shows me an error: undefined reference to 'dlopen' Do you know a solution? Here is my code. #include <stdlib.h> #include <stdio.h> #include <dlfcn.h> int main(int argc, char **argv) { void *handle; double (*desk)(char*); char *error; handle = dlopen ("/lib/CEDD_LIB.so.6", RTLD_LAZY); if (!handle) { fputs (dlerror(), stderr); exit(1); } desk= dlsym(handle, "Apply"); if ((error = dlerror()) != NULL) { fputs(error, stderr); exit(1); } dlclose(handle); }

    Read the article

  • Is it "legal" for C++ runtime to call terminate() when the C++ code is used inside some non-C++ prog

    - by sharptooth
    In certain cases - especially when an exception escapes a destructor during stack unwinding - C++ runtime calls terminate() which must do something reasonable post-mortem and then exit the program. When a question "why so harsh" arises the answer is usually "there's nothing more reasonable to do in such error situations". That sounds reasonable if the whole program is in C++. Now what if the C++ code is in a library and the program that uses the library is not in C++? This happens quite often - for example I might have a native C++ COM component consumed by a .NET program. Once terminate() is called inside the component code the .NET program suddenly ends abnormally. The program author will first of all think "I don't care of C++, why the hell is this library make my program exit?" How do I handle the latter scenario when developing libraries in C++? Is it reasonable that terminate() unexpectedly ends the program? Is there a better way to handle such situations?

    Read the article

  • Compiling a class using Java code using process

    - by Noona
    I have this piece of code that compiles a class called tspClassName, when I compile using this code: Process compileProc = null; try { compileProc = Runtime.getRuntime().exec("javac -classpath ." + File.separator + "src" + File.separator + File.separator + "generated." + tspClassName + ".java -d ." + File.separator + "bin"); // catch exception if (compileProc.exitValue() != 0) { System.out.println("Compile exit status: " + compileProc.exitValue()); System.err.println("Compile error:" + compileProc.getErrorStream()); it outputs this: "Compile exit status: 2 Compile error:java.io.FileInputStream@17182c1" The class tspClassName.java compiles without errors otherwise, so I am guessing it has to do with the path,and in my eclipse project, the tspClassName.java resides in package homework4.generated inside src, is there something wrong with the path that I use in the code? thanks

    Read the article

  • passing pipe to threads

    - by alaamh
    I see it's easy to open pipe between two process using fork, but how we can passing open pipe to threads. Assume we need to pass out of PROGRAM A to PROGRAM B "may by more than one thread", PROGRAM B send his output to PROGRAM C #include <stdio.h> #include <stdlib.h> #include <pthread.h> struct targ_s { int fd_reader; }; void *thread1(void *arg) { struct targ_s *targ = (struct targ_s*) arg; int status, fd[2]; pid_t pid; pipe(fd); pid = fork(); if (pid == 0) { dup2(STDIN_FILENO, targ->fd_reader); close(fd[0]); dup2(fd[1], STDOUT_FILENO); close(fd[1]); execvp ("PROGRAM B", NULL); exit(1); } else { close(fd[1]); dup2(fd[0], STDIN_FILENO); close(fd[0]); execl("PROGRAM C", NULL); wait(&status); return NULL; } } int main(void) { FILE *fpipe; char *command = "PROGRAM A"; char buffer[1024]; if (!(fpipe = (FILE*) popen(command, "r"))) { perror("Problems with pipe"); exit(1); } char* outfile = "out.dat"; FILE* f = fopen (outfile, "wb"); int fd = fileno( f ); struct targ_s targ; targ.fd_reader = fd; pthread_t thid; if (pthread_create(&thid, NULL, thread1, &targ) != 0) { perror("pthread_create() error"); exit(1); } int len; while (read(fpipe, buffer, sizeof (buffer)) != 0) { len = strlen(buffer); write(fd, buffer, len); } pclose(fpipe); return (0); }

    Read the article

  • running Echo from Java

    - by ripper234
    I'm trying out the Runtime.exec() method to run a command line process. I wrote this sample code, which runs without problems but doesn't produce a file at c:\tmp.txt. String cmdLine = "echo foo > c:\\tmp.txt"; Runtime rt = Runtime.getRuntime(); Process pr = rt.exec(cmdLine); BufferedReader input = new BufferedReader( new InputStreamReader(pr.getInputStream())); String line; StringBuilder output = new StringBuilder(); while ((line = input.readLine()) != null) { output.append(line); } int exitVal = pr.waitFor(); logger.info(String.format("Ran command '%s', got exit code %d, output:\n%s", cmdLine, exitVal, output)); The output is INFO 21-04 20:02:03,024 - Ran command 'echo foo c:\tmp.txt', got exit code 0, output: foo c:\tmp.txt

    Read the article

  • Ending tail -f started in a shell script

    - by rangalo
    I have the following. A Java process writing logs to the stdout A shell script starting the Java process Another shell script which executes the previous one and redirects the log I check the log file with the tail -f command for the success message. Even if I have exit 0 in the code I cannot end the tail -f process. Which doesn't let my script to finish. Is there any other way of doing this in Bash? The code looks like the following. function startServer() { touch logfile startJavaprocess > logfile & tail -f logfile | while read line do if echo $line | grep -q 'Started'; then echo 'Server Started' exit 0 fi done }

    Read the article

  • Check result of AX_PYTHON_MODULE in configure.ac

    - by tmatth
    In using the m4_ax_python_module.m4 macro in configure.ac (AX_PYTHON_MODULE), one can know at configure time if a given module is installed. It takes two arguments, the module name, and second argument which if not empty, will lead to an exit, useful when the module is a must-have. In the case where you don't want a fatal exit, how do you test in configure.ac which modules were found or not? They output "yes" or "no" when configure is run, but that's all I've found so far. Basically If I have these lines in configure.ac: AX_PYTHON_MODULE(json,[]) AX_PYTHON_MODULE(simplejson,[]) How do I test which of the two modules were found? See http://www.gnu.org/software/autoconf-archive/ax_python_module.html#ax_python_module for documentation about this macro.

    Read the article

  • cd Terminal at a given directory after running a Python script?

    - by Dave Everitt
    I'm working on a simple Python script that can use subprocess and/or os to execute some commands, which is working fine. However, when the script exits I'd like to cd the actual Terminal (in this case OS X) so on exit, the new files are ready to use in the directory where the have been created. All the following (subprocess.Popen, os.system, os.chdir) can do what I want from within the script (i.e. they execute stuff in the target directory) but on exit leave the Terminal at the script's own directory, not the target directory. I'd like to avoid writing a shell script to temporary file just to achieve this, if this is at all possible anyway?

    Read the article

  • PHP session values lost after redirect on one script but preserved after redirection on another.

    - by Iuhiz
    On my registration script i have: // Save registration information into the database // Set sessions $_SESSION['var1'] = 'somevalue'; $_SESSION['var2'] = 'anothervalue'; header('Location: /somewhere'); exit(); Then on my login script i have: // Check if user provided correct login credentials if (correct) { $_SESSION['var1'] = 'somevalue'; $_SESSION['var2'] = 'anothervalue'; } header('Location: /somewhere'); exit(); What happened is that the session variables were lost after the header redirect in the registration script but they were preserved after the redirect in the login script. I've checked session_id() at both pages and they have the same value, included session_start() at the top of every page and basically tried the solutions to this common problem found on Stackoverflow but somehow nothing seemed to work. I'm beginning to wonder if it is something to do with my server configuration instead of my code.

    Read the article

  • After MS Access Conversion 97 --> 2002 I get 'Enter Parameter Value' when exitting a form.

    - by user270370
    Hi, So when I exit a form from my newly converted .mdb it asks to Enter Parameter Value. It goes through (ie if i enter a value, it asks for another) the values required for a query that is run on a List Box on the page. The query has not been changed during the conversion. The values it is getting for the query are from text boxes on the same form. There are a few Requeries in the form (run from VB) so I imagine that it is rerunning again on Exit (although this isnt explicit in the form properties). I'm not quite sure how to go about solving this. Your help would be great. Thanks

    Read the article

  • How do I return a perl variable to a .ksh script?

    - by Dave
    I have a .ksh script that calls a perl pgm. The perl pgm creates some important data that the .ksh script needs to act on. Example: .ksh pgm #!/usr/bin/ksh abc.pl > $logFile # perl pgm creates variable $importantData See below. # HOW DO I GET THE .KSH SCRIPT TO SEE $importantData ??? def.ksh $importantData # send important data to another .ksh script exit . Perl pgm $importantData = somefunction(); exit;

    Read the article

  • python: problem with dictionary get method default value

    - by goutham
    I'm having a new problem here .. CODE 1: try: urlParams += "%s=%s&"%(val['name'], data.get(val['name'], serverInfo_D.get(val['name']))) except KeyError: print "expected parameter not provided - "+val["name"]+" is missing" exit(0) CODE 2: try: urlParams += "%s=%s&"%(val['name'], data.get(val['name'], serverInfo_D[val['name']])) except KeyError: print "expected parameter not provided - "+val["name"]+" is missing" exit(0) see the diffrence in serverInfo_D[val['name']] & serverInfo_D.get(val['name']) code 2 fails but code 1 works the data serverInfo_D:{'user': 'usr', 'pass': 'pass'} data: {'par1': 9995, 'extraparam1': 22} val: {'par1','user','pass','extraparam1'} exception are raised for for data dict .. and all code in for loop which iterates over val

    Read the article

  • How to create a win32 application without window in background with C?

    - by user563413
    The application do not need any window or console. It can be a console application if the console window can be removed or can be put into background. The application will do some simple tasks(such as cleaning rubbish files) and exit. I hope that the application should not be a windows service if possible. I hope that the application can be started with double-click in explorer window and run silently. When the application is running, I hope that the mouse cursor should not be changed to hourglass shape. That is to say, do not disturb the user when the application is running. Just run and exit silently. DO NOT NEED to run it when windows starts or user logins. I hope this can be done in C if possible. What should I do? Thanks!

    Read the article

  • Running daemon through rsh

    - by Max
    I want to run program as daemon in remote machine in Unix. I have rsh connection and I want the program to be running after disconnection. Suppose I have two programs: util.cpp and forker.cpp. util.cpp is some utility, for our purpose let it be just infinite root. util.cpp int main() { while (true) {}; return 0; } forker.cpp takes some program and run it in separe process through fork() and execve(): forker.cpp #include <stdio.h> #include <errno.h> #include <stdlib.h> #include <unistd.h> int main(int argc, char** argv) { if (argc != 2) { printf("./a.out <program_to_fork>\n"); exit(1); } pid_t pid; if ((pid = fork()) < 0) { perror("fork error."); exit(1); } else if (!pid) { // Child. if (execve(argv[1], &(argv[1]), NULL) == -1) { perror("execve error."); exit(1); } } else { // Parent: do nothing. } return 0; } If I run: ./forker util forker is finished very quickly, and bash 'is not paused', and util is running as daemon. But if I run: scp forker remote_server://some_path/ scp program remote_server://some_path/ rsh remote_server 'cd /some_path; ./forker program' then it is all the same (i.e. at the remote_sever forker is finishing quickly, util is running) but my bash in local machine is paused. It is waiting for util stopping (I checked it. If util.cpp is returning than it is ok.), but I don't understand why?! There are two questions: 1) Why is it paused when I run it through rsh? I am sure that I chose some stupid way to run daemon. So 2) How to run some program as daemon in C/C++ in unix-like platforms. Tnx!

    Read the article

  • Option Value Changed - ODBC Error 2169

    - by fredrick-ughimi
    Hello Edgar, Thank you for your response. I am using Powerbasic (www.powerbasic.com) as my compiler and SQLTools as a third party tool to access ADS through ODBC. I must stat that this error also appers when I take other actions like Update, Delete, Find, etc. But I don't get this error when I am using MS Access. Here is my save routine: [Code] Local sUsername As String Local sPassword As String Local sStatus As String Local sSQLStatement1 As String sUsername = VD_GetText (nCbHndl, %ID_FRMUPDATEUSERS_TXTUSERNAME) If Trim$(sUsername) = "" Then MsgBox "Please, enter Username", %MB_ICONINFORMATION Or %MB_TASKMODAL, VD_App.Title Control Set Focus nCbHndl, %ID_FRMUPDATEUSERS_TXTUSERNAME Exit Function End If sPassword = VD_GetText (nCbHndl, %ID_FRMUPDATEUSERS_TXTPASSWORD) If Trim$(sPassword) = "" Then MsgBox "Please, enter Password", %MB_ICONINFORMATION Or %MB_TASKMODAL, VD_App.Title Control Set Focus nCbHndl, %ID_FRMUPDATEUSERS_TXTPASSWORD Exit Function End If sStatus = VD_GetText (nCbHndl, %ID_FRMUPDATEUSERS_CBOSTATUS) sSQLStatement1 = "INSERT INTO [tblUsers] (Username, Password, Status) " + _ "VALUES ('" + sUsername + "','" + sPassword + "','" + sStatus +"')" 'Submit the SQL Statement to the database SQL_Stmt %SQL_STMT_IMMEDIATE, sSQLStatement1 'Check for errors If SQL_ErrorPending Then SQL_MsgBox SQL_ErrorQuickAll, %MSGBOX_OK End If [/code] Best regards,

    Read the article

  • Resize image on upload php

    - by blasteralfred
    Hi, I have a php script for image upload as below <?php $LibID = $_POST[name]; define ("MAX_SIZE","10000"); function getExtension($str) { $i = strrpos($str,"."); if (!$i) { return ""; } $l = strlen($str) - $i; $ext = substr($str,$i+1,$l); return $ext; } $errors=0; $image=$_FILES['image']['name']; if ($image) { $filename = stripslashes($_FILES['image']['name']); $extension = getExtension($filename); $extension = strtolower($extension); if (($extension != "jpg") && ($extension != "jpeg")) { echo '<h1>Unknown extension!</h1>'; $errors=1; exit(); } else { $size=filesize($_FILES['image']['tmp_name']); if ($size > MAX_SIZE*1024) { echo '<h1>You have exceeded the size limit!</h1>'; $errors=1; exit(); } $image_name=$LibID.'.'.$extension; $newname="uimages/".$image_name; $copied = copy($_FILES['image']['tmp_name'], $newname); if (!$copied) { echo '<h1>image upload unsuccessfull!</h1>'; $errors=1; exit(); }}} ?> which uploads the image file to a folder "uimages" in the root. I have made changes in the html file for the compact display of the image by defining "max-height" and "max-width". But i want to resize the image file on upload. The image file may have a maximum width of 100px and maximum height of 150px. The image proportions must be constrained. That is, the image may be smaller than the above dimensions, but, it should not exceed the limit. How can I make this possible?? Thanks in advance :) blasteralfred..

    Read the article

  • ResultSet Already closed error

    - by javatraniee
    why am i getting an error of resultset already closed error public class Server implements Runnable { private static int port=1600, maxConnections=0; public static Connection connnew=null; public static Connection connnew1=null; public static Statement stnew,stnew1,stnew2,stnew3,stnew4; public void getConnection() { try{ Class.forName("org.gjt.mm.mysql.Driver"); connnew= DriverManager.getConnection("jdbc:mysql://localhost/db_alldata","root","flashkit"); connnew1= DriverManager.getConnection("jdbc:mysql://localhost/db_main","root","flashkit"); stnew=connnew.createStatement(); stnew1=connnew.createStatement(); stnew2=connnew1.createStatement(); stnew3=connnew1.createStatement(); stnew4=connnew1.createStatement(); }catch (Exception e) { System.out.print("Get Connection Exception---"+new SimpleDateFormat("yyyy-MM-dd HH:mm:ss").format(new Date())+"----- "+e); } } public void closeConnection() { try{ if(!(connnew.isClosed())) { stnew.close(); stnew1.close(); connnew.close(); } if(!(connnew1.isClosed())) { stnew2.close(); stnew3.close(); stnew4.close(); connnew1.close(); } }catch (Exception e) { System.out.print("Close Connection Closing Exception-----"+new SimpleDateFormat("yyyy-MM-dd HH:mm:ss").format(new Date())+"-------"+e); } } Server() { try{ }catch(Exception ee) { System.out.print("Server Exceptions in main connection--"+new SimpleDateFormat("yyyy-MM-dd HH:mm:ss").format(new Date())+"------"+ee); } } public static void main(String[] args) throws SQLException { int i=0; Server STUD= new Server(); STUD.getConnection(); try { ServerSocket listener = new ServerSocket(port); Socket server; while((i++ < maxConnections) || (maxConnections == 0)) { @SuppressWarnings("unused") doComms connection; server = listener.accept(); try{ ResultSet checkconnection=stnew4.executeQuery("select count(*) from t_studentdetails"); if(checkconnection.next()) { //DO NOTHING IF EXCEPTION THEN CLOSE ALL CONNECTIONS AND OPEN NEW CONNECTIONS } }catch (Exception e) { System.out.print("Db Connection Lost Closing And Re-Opning It--------"+new SimpleDateFormat("yyyy-MM-dd HH:mm:ss").format(new Date())+"--------"+e); STUD.closeConnection(); STUD.getConnection(); } doComms conn_c= new doComms(server,stnew,stnew1,stnew2,stnew3); Thread t = new Thread(conn_c); t.start(); } }catch (IOException ioe) { System.out.println("Main IOException on socket listen: " + ioe); } } public void run() { } } class doComms implements Runnable { private Socket server; private String input; static Connection conn=null; static Connection conn1=null; static Statement st,st1,st2,st3; doComms(Socket server, Statement st,Statement st1,Statement st2,Statement st3 ) { this.server=server; doComms.st=st; doComms.st1=st1; doComms.st2=st2; doComms.st3=st3; } @SuppressWarnings("deprecation") public void run () { input=""; //char ch; try { DataInputStream in = new DataInputStream (server.getInputStream()); OutputStreamWriter outgoing=new OutputStreamWriter(server.getOutputStream()); while(!(null==(input=in.readLine()))) { savetodatabase(input,server.getPort(),outgoing); } //server.close(); } catch (IOException ioe) { System.out.println("RUN IOException on socket listen:-------"+new SimpleDateFormat("yyyy-MM-dd HH:mm:ss").format(new Date())+"----- " + ioe); ioe.printStackTrace(); } } public void savetodatabase(String line, int port1, OutputStreamWriter outgoing) { try { String Rollno="-",name="-",div="-",storeddate="-",storedtime="-",mailfrom=""; String newline=line; String unitid="-"; storeddate=new SimpleDateFormat("yyyy-MM-dd").format(new java.util.Date()); storedtime=new SimpleDateFormat("HH:mm:ss").format(new java.util.Date()); String sql2="delete from t_currentport where PortNumber='"+port1+"''"; st2.executeUpdate(sql2); sql2="insert into t_currentport (unitid, portnumber,thedate,thetime) values ('"+unitid+"','"+port1+"','"+storeddate+"','"+storedtime+"')"; st2.executeUpdate(sql2); String tablename=GetTable(); String sql="select * from t_studentdetails where Unitid='"+unitid+"'"; ResultSet rst=st2.executeQuery(sql); if(rst.next()) { Rollno=rst.getString("Rollno"); name=rst.getString("name"); div=rst.getString("div"); } String sql1="insert into studentInfo StoredDate,StoredTime,Subject,UnitId,Body,Status,Rollno,div,VehId,MailDate,MailTime,MailFrom,MailTo,Header,UnProcessedStamps) values('"+storeddate+"','"+storedtime+"','"+unitid+"','"+unitid+"','"+newline+"','Pending','"+Rollno+"','"+div+"','"+name+"','"+storeddate+"','"+storedtime+"','"+mailfrom+"','"+mailfrom+"','-','-')"; st1.executeUpdate(sql1); }catch(Exception e) { System.out.print("Save to db Connection Exception--"+new SimpleDateFormat("yyyy-MM-dd HH:mm:ss").format(new Date())+"-->"+e); } } }

    Read the article

  • OpenSSL in C++ email client - server closes connection with TLSv1 Alert message

    - by mice
    My app connects to a IMAP email server. One client configured his server to reject SSLv2 certificates, and now my app fails to connect to the server. All other email clients connect to this server successfully. My app uses openssl. I debugged by creating minimal openssl client and attempt to connect to the server. Below is the code with connects to the mail server (using Windows sockets, but same problem is with unix sockets). Server sends its initial IMAP greeting message, but after client sends 1st command, server closes connection. In Wireshark, I see that after sending command to server, it returns TLSv1 error message 21 (Encrypted Alert) and connection is gone. I'm looking for proper setup of OpenSSL for this connection to succeed. Thanks #include <stdio.h> #include <memory.h> #include <errno.h> #include <sys/types.h> #include <winsock2.h> #include <openssl/crypto.h> #include <openssl/x509.h> #include <openssl/pem.h> #include <openssl/ssl.h> #include <openssl/err.h> #define CHK_NULL(x) if((x)==NULL) exit(1) #define CHK_ERR(err,s) if((err)==-1) { perror(s); exit(1); } #define CHK_SSL(err) if((err)==-1) { ERR_print_errors_fp(stderr); exit(2); } SSL *ssl; char buf[4096]; void write(const char *s){ int err = SSL_write(ssl, s, strlen(s)); printf("> %s\n", s); CHK_SSL(err); } void read(){ int n = SSL_read(ssl, buf, sizeof(buf) - 1); CHK_SSL(n); if(n==0){ printf("Finished\n"); exit(1); } buf[n] = 0; printf("%s\n", buf); } void main(){ int err=0; SSLeay_add_ssl_algorithms(); SSL_METHOD *meth = SSLv23_client_method(); SSL_load_error_strings(); SSL_CTX *ctx = SSL_CTX_new(meth); CHK_NULL(ctx); WSADATA data; WSAStartup(0x202, &data); int sd = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP); CHK_ERR(sd, "socket"); struct sockaddr_in sa; memset(&sa, 0, sizeof(sa)); sa.sin_family = AF_INET; sa.sin_addr.s_addr = inet_addr("195.137.27.14"); sa.sin_port = htons(993); err = connect(sd,(struct sockaddr*) &sa, sizeof(sa)); CHK_ERR(err, "connect"); /* ----------------------------------------------- */ /* Now we have TCP connection. Start SSL negotiation. */ ssl = SSL_new(ctx); CHK_NULL(ssl); SSL_set_fd(ssl, sd); err = SSL_connect(ssl); CHK_SSL(err); // Following two steps are optional and not required for data exchange to be successful. /* printf("SSL connection using %s\n", SSL_get_cipher(ssl)); X509 *server_cert = SSL_get_peer_certificate(ssl); CHK_NULL(server_cert); printf("Server certificate:\n"); char *str = X509_NAME_oneline(X509_get_subject_name(server_cert),0,0); CHK_NULL(str); printf(" subject: %s\n", str); OPENSSL_free(str); str = X509_NAME_oneline(X509_get_issuer_name (server_cert),0,0); CHK_NULL(str); printf(" issuer: %s\n", str); OPENSSL_free(str); // We could do all sorts of certificate verification stuff here before deallocating the certificate. X509_free(server_cert); */ printf("\n\n"); read(); // get initial IMAP greeting write("1 CAPABILITY\r\n"); // send 1st command read(); // get reply to cmd; server closes connection here write("2 LOGIN a b\r\n"); read(); SSL_shutdown(ssl); closesocket(sd); SSL_free(ssl); SSL_CTX_free(ctx); }

    Read the article

  • ruby on rails has_many through relationship

    - by BennyB
    Hi i'm having a little trouble with a has_many through relationship for my app and was hoping to find some help. So i've got Users & Lectures. Lectures are created by one user but then other users can then "join" the Lectures that have been created. Users have their own profile feed of the Lectures they have created & also have a feed of Lectures friends have created. This question however is not about creating a lecture but rather "Joining" a lecture that has been created already. I've created a "lecturerelationships" model & controller to handle this relationship between Lectures & the Users who have Joined (which i call "actives"). Users also then MUST "Exit" the Lecture (either by clicking "Exit" or navigating to one of the header navigation links). I'm grateful if anyone can work through some of this with me... I've got: Users.rb model Lectures.rb model Users_controller Lectures_controller then the following model lecturerelationship.rb class lecturerelationship < ActiveRecord::Base attr_accessible :active_id, :joinedlecture_id belongs_to :active, :class_name => "User" belongs_to :joinedlecture, :class_name => "Lecture" validates :active_id, :presence => true validates :joinedlecture_id, :presence => true end lecturerelationships_controller.rb class LecturerelationshipsController < ApplicationController before_filter :signed_in_user def create @lecture = Lecture.find(params[:lecturerelationship][:joinedlecture_id]) current_user.join!(@lecture) redirect_to @lecture end def destroy @lecture = Lecturerelationship.find(params[:id]).joinedlecture current_user.exit!(@user) redirect_to @user end end Lectures that have been created (by friends) show up on a users feed in the following file _activity_item.html.erb <li id="<%= activity_item.id %>"> <%= link_to gravatar_for(activity_item.user, :size => 200), activity_item.user %><br clear="all"> <%= render :partial => 'shared/join', :locals => {:activity_item => activity_item} %> <span class="title"><%= link_to activity_item.title, lecture_url(activity_item) %></span><br clear="all"> <span class="user"> Joined by <%= link_to activity_item.user.name, activity_item.user %> </span><br clear="all"> <span class="timestamp"> <%= time_ago_in_words(activity_item.created_at) %> ago. </span> <% if current_user?(activity_item.user) %> <%= link_to "delete", activity_item, :method => :delete, :confirm => "Are you sure?", :title => activity_item.content %> <% end %> </li> Then you see I link to the the 'shared/join' partial above which can be seen in the file below _join.html.erb <%= form_for(current_user.lecturerelationships.build(:joinedlecture_id => activity_item.id)) do |f| %> <div> <%= f.hidden_field :joinedlecture_id %> </div> <%= f.submit "Join", :class => "btn btn-large btn-info" %> <% end %> Some more files that might be needed: config/routes.rb SampleApp::Application.routes.draw do resources :users do member do get :following, :followers, :joined_lectures end end resources :sessions, :only => [:new, :create, :destroy] resources :lectures, :only => [:create, :destroy, :show] resources :relationships, :only => [:create, :destroy] #for users following each other resources :lecturerelationships, :only => [:create, :destroy] #users joining existing lectures So what happens is the lecture comes in my activity_feed with a Join button option at the bottom...which should create a lecturerelationship of an "active" & "joinedlecture" (which obviously are supposed to be coming from the user & lecture classes. But the error i get when i click the join button is as follows: ActiveRecord::StatementInvalid in LecturerelationshipsController#create SQLite3::ConstraintException: constraint failed: INSERT INTO "lecturerelationships" ("active_id", "created_at", "joinedlecture_id", "updated_at") VALUES (?, ?, ?, ?) Also i've included my user model (seems the error is referring to it) user.rb class User < ActiveRecord::Base attr_accessible :email, :name, :password, :password_confirmation has_secure_password has_many :lectures, :dependent => :destroy has_many :lecturerelationships, :foreign_key => "active_id", :dependent => :destroy has_many :joined_lectures, :through => :lecturerelationships, :source => :joinedlecture before_save { |user| user.email = email.downcase } before_save :create_remember_token validates :name, :presence => true, :length => { :maximum => 50 } VALID_EMAIL_REGEX = /\A[\w+\-.]+@[a-z\d\-.]+\.[a-z]+\z/i validates :email, :presence => true, :format => { :with => VALID_EMAIL_REGEX }, :uniqueness => { :case_sensitive => false } validates :password, :presence => true, :length => { :minimum => 6 } validates :password_confirmation, :presence => true def activity # This feed is for "My Activity" - basically lectures i've started Lecture.where("user_id = ?", id) end def friendactivity Lecture.from_users_followed_by(self) end # lECTURE TO USER (JOINING) RELATIONSHIPS def joined?(selected_lecture) lecturerelationships.find_by_joinedlecture_id(selected_lecture.id) end def join!(selected_lecture) lecturerelationships.create!(:joinedlecture_id => selected_lecture.id) end def exit!(selected_lecture) lecturerelationships.find_by_joinedlecture_id(selected_lecture.id).destroy end end Thanks for any and all help - i'll be on here for a while so as mentioned i'd GREATLY appreciate someone who may have the time to work through my issues with me...

    Read the article

  • Get controller method caller (3rd party webservice)

    - by bastijn
    Is it possible to retrieve the URL of a 3rd party webservice calling my controller method? Things like Request.Current.Url refer to my own URL (/someController/someAction/). The 3rd party webservice is sending HTTP POST data to my /someController/someAction and I wish to send back a HTTP POST message to the caller of the method, the 3rd party webservice, without using return Content["some response"] which will force me to exit the method. Since the answer is plain text I would like to send it using HTTP Post. What I actually try to do is respond to the calling webservice without exiting my method (return Content() will exit) so I can call other methods to process the data send to me by the webservice. I want to first tell the webservice I received their stuff and than process, in this way when a processing error occurs the webservice at least will not resend old data. Is there another way to do this than building your own HTTP post?

    Read the article

  • Batch file writing to log then ending process

    - by Andrew Service
    I have a batch file that calls a process and in that process I have: IF %ERRORLEVEL% NEQ 0 EXIT /B %ERRORLEVEL% Now I wanted to upgrade this a bit and give some meaningful message to an output log when if the process fails, also I do not want the main batch to continue processing because the next processes are dependent on data from previous calls; I wonder if this would be correct but not sure: CALL Process 1 IF %ERRORLEVEL% NEQ 0 GOTO ErrorInfirstProcess /B %ERRORLEVEL% :ErrorInfirstProcess ECHO Process 1 Failed on %Date% at %Time%. >>C:\Log.txt" CALL Process 2 IF %ERRORLEVEL% NEQ 0 GOTO ErrorInSecondProcess /B %ERRORLEVEL% :ErrorInSecondProcess ECHO Process 2 Failed on %Date% at %Time%. >>C:\Log.txt" I also want to know if I still need the /B or do I need to put an EXIT command after the echo? Thanks A

    Read the article

  • Stacked up with web service configuration

    - by Allan Chua
    I'm currently stacked with the web service that im creating right now. when Testing it in local it all works fine but when I try to deploy it to the web server it throws me the following error An error occurred while trying to make a request to URI '...my web service URI here....'. This could be due to attempting to access a service in a cross-domain way without a proper cross-domain policy in place, or a policy that is unsuitable for SOAP services. You may need to contact the owner of the service to publish a cross-domain policy file and to ensure it allows SOAP-related HTTP headers to be sent. This error may also be caused by using internal types in the web service proxy without using the InternalsVisibleToAttribute attribute. Please see the inner exception for more details. here is my web config. <?xml version="1.0"?> <configuration> <configSections> </configSections> <system.webServer> <modules runAllManagedModulesForAllRequests="true"> </modules> <validation validateIntegratedModeConfiguration="false" /> <security> <requestFiltering> <requestLimits maxAllowedContentLength="2000000000" /> </requestFiltering> </security> </system.webServer> <connectionStrings> <add name="........" providerName="System.Data.SqlClient" /> </connectionStrings> <appSettings> <!-- Testing --> <add key="DataConnectionString" value="..........." /> </appSettings> <system.web> <compilation debug="true" targetFramework="4.0"> <buildProviders> <add extension=".rdlc" type="Microsoft.Reporting.RdlBuildProvider, Microsoft.ReportViewer.WebForms, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" /> </buildProviders> </compilation> <httpRuntime executionTimeout="1200" maxRequestLength="2000000" /> </system.web> <system.serviceModel> <serviceHostingEnvironment aspNetCompatibilityEnabled="true" multipleSiteBindingsEnabled="true" /> <behaviors> <serviceBehaviors> <behavior name="Service1"> <serviceMetadata httpGetEnabled="true" /> <serviceDebug includeExceptionDetailInFaults="true" /> <dataContractSerializer maxItemsInObjectGraph="2000000000" /> </behavior> <behavior name=""> <serviceMetadata httpGetEnabled="true" /> <serviceDebug includeExceptionDetailInFaults="false" /> </behavior> <behavior name="nextSPOTServiceBehavior"> <serviceMetadata httpsGetEnabled="true"/> <serviceDebug includeExceptionDetailInFaults="true" /> <dataContractSerializer maxItemsInObjectGraph="2000000000" /> </behavior> </serviceBehaviors> </behaviors> <bindings> <basicHttpBinding> <binding name="SecureBasic" closeTimeout="00:10:00" openTimeout="00:10:00" receiveTimeout="00:10:00" sendTimeout="00:10:00" maxBufferSize="2147483647" maxReceivedMessageSize="2147483647"> <security mode="Transport" /> <readerQuotas maxArrayLength="2000000" maxStringContentLength="2000000"/> </binding> <binding name="BasicHttpBinding_IDownloadManagerService" closeTimeout="00:10:00" openTimeout="00:10:00" receiveTimeout="00:10:00" sendTimeout="00:10:00" maxBufferSize="2147483647" maxReceivedMessageSize="2147483647"> <security mode="Transport" /> </binding> </basicHttpBinding> </bindings> <services> <service behaviorConfiguration="nextSPOTServiceBehavior" name="NextSPOTDownloadManagerWebServiceTester.Web.WebServices.DownloadManagerService"> <endpoint binding="basicHttpBinding" bindingConfiguration="SecureBasic" name="basicHttpSecure" contract="NextSPOTDownloadManagerWebServiceTester.Web.WebServices.IDownloadManagerService" /> <!--<endpoint binding="basicHttpBinding" bindingConfiguration="" name="basicHttp" contract="NextSPOTDownloadManagerWebServiceTester.Web.WebServices.IDownloadManagerService" />--> <!--<endpoint address="" binding="basicHttpBinding" bindingConfiguration="BasicHttpBinding_IDownloadManagerService" contract="NextSPOTDownloadManagerWebServiceTester.Web.WebServices.IDownloadManagerService" /> <endpoint address="mex" binding="mexHttpsBinding" contract="IMetadataExchange" />--> </service> </services > </system.serviceModel> </configuration>

    Read the article

< Previous Page | 397 398 399 400 401 402 403 404 405 406 407 408  | Next Page >