Search Results

Search found 13817 results on 553 pages for 'net4 full'.

Page 403/553 | < Previous Page | 399 400 401 402 403 404 405 406 407 408 409 410  | Next Page >

• Windows 7 boot problem on a Lenovo Thinkpad Z61m 9450HAG

  - by Matt Taylor

  I recently did a full upgrade of Windows 7 on my Thinkpad. Everything worked fine after up until the second reboot (the first reboot after some updates installed worked OK). At second reboot time the system would just black screen before the Windows logo appears. Disk/wireless/power/battery lights are all lit and the disk light is active (flickering). However, if I remove my battery and boot with just power it boots fine and quickly, and everything is OK. Any help on why this won't boot with battery plugged in is greatly appreciated. I need to take this battery out on the road/trains, etc. A little more detail on this story. The battery I had inserted when doing the (failed) boot was a long life battery. I have not tried inserting this battery when Windows is logged in. I have another (normal life) battery that I have charged up within Windows. It has just got to 100% and I am about to reboot with it in. I am using the Lenovo power manager to diagnose the battery - all seems OK. I will report back shortly as to the outcome. OK, so I chose the reboot option from within Windows, the machine seemed to shutdown okay, but then stalled. It didn't turn off completely and didn't reboot, but just sat, with the fan humming, somewhere in between! I had to hold the power button in for a few seconds until the fan stopped and then hit the power button again to boot the machine from fresh. One good thing, with this battery (the normal one) it booted into Windows 7 the first time with a battery! So, now I have rebooting issues. I have 3 errors in the event log: A timeout was reached (30000 milliseconds) while waiting for the lxdxCATSCustConnectService service to connect. The lxdxCATSCustConnectService service failed to start due to the following error: The service did not respond to the start or control request in a timely fashion. The following boot-start or system-start driver(s) failed to load: cdrom Any thoughts?

  Read the article

• Clustering filesystem for small files

  - by viraptor

  Hi, I'm looking for a distributed filesystem which I could use for storing lots of small files (<1MB usually). What I want to get is: 2 servers which have the fs mounted themselves and mirror the data locking support (among reachable nodes) some kind of best-effort automatic resynchronisation after one node goes down and comes back again What I mean by the resync is that, I'm ok with both servers doing read/write operations even if they split-brain. I'm also ok if a local process obtains a lock if the other host is not reachable. From the resync I expect only a file-level consistent view after a while - that is - if file x is modified on both nodes during a split-brain, I don't really care which one is available after they join again, as long as it's full file, not one block coming from node1 and another block from node2. Is there a solution like that out there? I see that gluster has some problems with file locks (even in 3.1). I also noticed that OCFS2 will panic if both nodes split-brain. What other filesystem would allow me to do what I want?

  Read the article

• Windows Server 2008 R2 - VPN Folder Sharing Permissions

  - by daveywc

  I have setup VPN access to my Windows Server 2008 R2 server using RRAS. Clients can connect, run applications, view shares etc. My problem is that one of the applications that they use relies on some network shares. The application is not able to access the shares unless the user first goes into Windows Explorer and accesses the share, providing their user name and password (the same one that they use to connect via the VPN). Previously on a different Windows Server 2008 (not R2) this was not necessary i.e. the application and user could access the share without providing another user name and password. I have tried giving the Everyone group full control over the shared folder - both on the Security tab and in the Permissions area under Advanced Sharing on the Sharing tab. This still did not resolve the issue. (I don't really want to give Everyone access anyway - I was hoping that granting access to a group that the VPN users had membership of would be enough). I have also turned off password protected sharing in the Advanced Sharing Settings area of the Network and Sharing Center (under both Home or Work and Public). So my question is what is preventing my VPN users from having access to these folders without having to re-supply the same login and password that they use to access the VPN? And what is the best practice in this type of scenario?

  Read the article

• What could cause random files being downloaded without permission?

  - by Dustin

  I have been having issues lately with a certain directory. It seems someone is placing files into it, or something of that sort, and any attempt to delete them is successful, HOWEVER they reappear over time (maybe not the exact same ones, but random files). I will provide you the information I can and several pictures of my problem: sandbox.mys4l.com/visual/files/b1.jpg Files like this have been appearing in my /visual/ folder, and I have no clue where they are coming from. sandbox.mys4l.com/visual/files/b2.jpg This is what is inside on of those weird files, it appears to be nothing problematic. sandbox.mys4l.com/visual/files/b4.jpg As you can see, in the time it took me to take the first picture, more odd files showed up. These log files are also being uploaded to this directory, and I know I didn't put them there. sandbox.mys4l.com/visual/files/b7.jpg This inside one of these mysterious .log files, I'm not sure what it's all about. These files only appear to be going into this specific area, and I'm not sure of their origin, only that they will not go away. I have done a full system scan at least twice with an up-to-date virus scan, and have looked for an unknown script which may be writing them there. Nothing has come up, so I come to you guys as I hear this is the best place to find answers. Hope this problem has a solution!

  Read the article

• My iPod never finishes syncing and only syncs audio, not pictures or video - any ideas as to how I c

  - by Sam Meldrum

  My iPod classic 160GB worked well for a couple of years. I used to sync a lot of photos at full resolution to it, but this recently stopped working after I moved to Windows 7. iTunes is on latest version - 9.1.1.12 iPod software is up to date - 1.1.2 Windows 7 is fully up to date and patched The symptoms are that the iPod will start to sync, all audio (music and podcasts will sync successfully) but the syncing will then just appear to continue - itunes message: Syncing iPod. Do not Disconnect. This sync never completes - I have left it trying for days. I have tried resetting the iPod using the Restore button, whereupon it restarts sync from default options and again will sync audio, but nothing else. I suspect that something has gone wrong on the hard-drive - either a bad sector or some corrupt data. Is there a process I can go through to fix this? E.g. SpinRite or a format? If so how do I go about formatting an iPod and will it be recognised as an iPod after format and work as normal? Any advice on what to try next much appreciated?

  Read the article

• Firefox not using Kerberos despite being configured to

  - by Nicolas Raoul

  I am deploying Linux/Firefox on a corporate Kerberos network. I followed this Kerberos-on-Firefox procedure but still Firefox does not connect via the company's Kerberos. I am using Firefox 3.0.18 on RedHat EL Server 5.5 Here is what I did: Run kinit on the command line to create a Kerberos ticket Check with klist: the ticket is valid until tomorrow, service principal is krbtgt/[email protected]. In Firefox, set network.negotiate-auth.trusted-uris and network.negotiate-auth.delegation-uris to .dc.thecompany.com. Load the company's portal page via its full hostname: http://server37.thecompany.com/alfresco. (note: server37 is actually the machine I am running Firefox on, but that should not be a problem I guess) PROBLEM: the company's intranet portal still serves me the login/password page. The same portal correctly uses Kerberos on Internet Explorer/Windows 7 machines, same settings, and shows the user's personal page. The server does not see any Kerberos request coming. Did I do something wrong? I enabled NSPR_LOG_MODULES=negotiateauth:5 as explained here, but the log file stays empty.

  Read the article

• Does btrfs balance also defragment files?

  - by pauldoo

  When I run btrfs filesystem balance, does this implicitly defragment files? I could imagine that balance simply reallocates each file extent separately, preserving the existing fragmentation. There is an FAQ entry, 'What does "balance" do?', which is unclear on this point: btrfs filesystem balance is an operation which simply takes all of the data and metadata on the filesystem, and re-writes it in a different place on the disks, passing it through the allocator algorithm on the way. It was originally designed for multi-device filesystems, to spread data more evenly across the devices (i.e. to "balance" their usage). This is particularly useful when adding new devices to a nearly-full filesystem. Due to the way that balance works, it also has some useful side-effects: If there is a lot of allocated but unused data or metadata chunks, a balance may reclaim some of that allocated space. This is the main reason for running a balance on a single-device filesystem. On a filesystem with damaged replication (e.g. a RAID-1 FS with a dead and removed disk), it will force the FS to rebuild the missing copy of the data on one of the currently active devices, restoring the RAID-1 capability of the filesystem.

  Read the article

• MSSQL error: consistency-based I/O error - can it be caused by an MSSQL or OS problem?

  - by Philipp Keller

  This is what I saw in the windows error log: SQL Server detected a logical consistency-based I/O error: incorrect checksum (expected: 0x19fedd20; actual: 0x19fed5e3). It occurred during a read of page (1:1764) in database ID 6 at offset 0x00000000dc8000 in file 'D:\mssql\local_repository_pbdiffimport.mdf'. Additional messages in the SQL Server error log or system event log may provide more detail. This is a severe error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online. I ran dbcc checkdb which told me I should restore with option REPAIR_ALLOW_DATA_LOSS, so I eventually ran DBCC CHECKDB (my_db_name, REPAIR_ALLOW_DATA_LOSS) WITH NO_INFOMSGS But that resulted in about 2'000 rows being lost. I restored a backup but now I'm afraid this will happen again since we already had a consistency problem in the same database about 2 weeks ago but then it happened in an index (recreated indexes solved the problem). We have investigated the discs - RAID5 looks good, no errors, and also none of the disc-check-utilities have revealed any hardware problem. Can this be caused by OS (Windows Server 2003) or by MSSQL (MSSQL Server 2005)?

  Read the article

• Share Exchange Calendar Outside Organization

  - by CalCurious

  I'm trying to figure out the best way to meet a user's (Corp-A-User) request to share their calendar with someone at another company (Corp-B-User). We're running Microsoft SBS 2008 with Exchange 2007 and SharePoint. The remote user is running Exchange, version unknown. Corp-A-User wants to give the Corp-B-User the ability to create appointments on Corp-A-User's calendar. This will naturally require sharing of Free/Busy information. Corp-A-User naturally lacks the vision to seen ANY problem with giving Corp-B-User full access to their calendar. But, I see the problems with that and would prefer that Corp-B-User have only the ability to see Free/Busy and create appointments. Most of the external publishing options that I have thought of, such as WebDav, allow displaying a user's calendar, but there are problems with security and the ability to create appointments. Right now, I'm thinking the cleanest solution would be to use a Google calendar along with Google Calendar Sync for the two user's Outlook clients. But, I'm not sure if there isn't a better way and I hate teh idea of pushing a corporate calendar up to Google. Not to mention the issues likely to pop up from the multiple sync paths. Does any one have a good solution for this scenario that would be willing to share what they use?

  Read the article

• Compress a folder of PDF files into separate zip archives

  - by Panrubius

  I wanted to take a folder full of PDF files and create a number of separate zip files, after following the advice on this question everything worked *almost*perfectly. Here's what happened: When I issued this command in Terminal: zip -s 5m -r ~/Desktop/invoices ~/Desktop/Invoices/ Everything worked really well, in that I got 11 ZIP files of approximately 5 MB each; placed in the folder specified. However, the files they outputted were named as follows: invoices.z01 invoices.z02 invoices.z03 invoices.z04 invoices.z05 invoices.z06 invoices.z07 invoices.z08 invoices.z09 invoices.z10 invoices.zip So as you can see only invoices.zip has been named correctly. I could go through and rename them one by one, but seriously, if we start doing that then what in the name of Evolution are computers for?! Now, I am also aware that I'm relatively new to the Terminal; so I could be making a very silly mistake somewhere. If that's the case, please be patient :-) Any help would be greatly appreciated. One last note: I'm quadriplegic so I would like to avoid GUI applications as much as possible, I use voice recognition software you see this working in the Terminal is much much easier.

  Read the article

• Screen Flickering: Hardware or Software?

  - by Wesley

  I have a Samsung N120 netbook (upgraded to 2GB DDR2 RAM) and there has been a screen flickering issue for some time now. However, I have not been able to accurately determine whether it is a software or hardware issue. Here are some of the symptoms: The flicker is white-colored and shows up as vertical lines. Flickering or not, there may be occasionally some random blue patterns (no image distortion) The screen tends to flicker more when the screen is not tilted back all the way. When tilting the screen back and forth, the screen will usually flicker. Some images on the screen may randomly distort without full-on flickering. The screen will flicker only on certain websites, but not on others. A certain part of a webpage may constantly be distorted randomly, even when scrolling. While flickering, the mouse will not move though I'm moving my finger along the touchpad. A connected external monitor does not have any problems. The flickering is completely random and does not seem to follow any CPU/GPU usage trends. Flickering usually gets worse when the screen brightness is turned higher. There will be flickering on battery and while plugged in. Search up "Samsung N120 - Screen Flickering" on YouTube for an idea of what the flickering looks like. However, there is no visible distortions and the flickering seems to stop when the screen has dimmed. Since the problems started, I tried formatting and using Windows 7, then formatted again and went back to Windows XP. The screen was also replaced sometime during this past summer. The uninstallation of the Samsung Battery Manager (on the original install of XP) seemed to reduce the flicker partially, but eventually got worse. So, what could possibly be the problem?

  Read the article

• Install Windows 7 from ISO image

  - by Albert

  Hi, I have an ISO file of the Windows 7 DVD and I want to install it on my PC which currently only runs Linux. I don't have any DVD drive. I have some unpartitioned space on one disk where I want to install it in. When I am doing this for Linux, I usually just create the partitions from the running system, format them, mount them, copy files over, chroot into it, setup the stuff and I can boot into it (or I use some of the uncountable available scripts which do exactly that automatically). However, I have no idea how to do the same thing with Windows. So far, I tried with VMware, i.e. I gave it direct full access to the disk where I want to install it in, installed it there, then tried to boot natively into it. The Windows logo showed up but after maybe 3 seconds or so, it crashes. Safe mode also crashes. I already expected that this probably would exactly behave the way it does right now because I have heard that Windows is quite sensible about hardware changes (i.e. the VMware hardware and the real hardware). However, how can I fix it now that it works? Or I could also just delete it again and try just over. But how exactly? I also searched for ways to boot directly into an ISO file. There seem to be ways to do that via GRUB (and maybe some additional boot loader), although quite complicated. I already tried one method (GRUB: map ...iso (hdX)), however, that didn't worked. Also, even if it does work, I will get into trouble when I boot into the newly installed Windows and it requests for the DVD (because it does that at the first boot into the new system). Seems all quite complicated. Isn't there some easy way like I would do it for Linux? Or what would be the easiest way to get what I want?

  Read the article

• Windows 7 - system error 5 problem

  - by ianhobson

  My wife has just had a new computer for Christmas (with an upgrade from VISTA to Windows 7), and has joined the home network. We are using a mix of WindowsXP and Ubuntu boxes linked via a switch. We are all in the same workgroup. (No domain). Internet access, DHCP, and DNS server is an SME server that thinks it is domain controller (although we are not using a domain). I need to run a script to back up my wife's machine (venus). In the past the script creates a share on a machine with lots of space (leda), and then executes the line. PSEXEC \\venus -u admin -p adminpassword -c -f d:\Progs\snapshot.exe C: \\leda\Venus\C-drive.SNA With the wife's old XP machine, this would run the sysinternals utility, copy shapshot,exe to her machine and run it, which would then back up her C: drive to the share on leda. I cannot get this to work with Windows 7, nor can I link through to the C$ share on her machine. This gives me a permissions error (system error 5). The admin account is a full admin account. And yes - I do know the password. The ordinary shares on her machine work fine! I guess I'm missing something that Microsoft have built into Windows 7 - but what? The machine is running Windows 7 business, with windows firewall, AVG anti virus, and all the crap-ware you get with a new PC removed. Thanks

  Read the article

• Laptop battery holds charge, but won't charge any more.

  - by Jeff

  Ok, I'm sure I will need to replace either my battery or my AC adapter, but would rather not buy one if the other is the problem. My problem is. I have a Sager laptop that gets quite a bit of use. The charging has always been a little bit odd. If I was in the process of using it, it would charge just fine and stay On AC power. If I left it alone, however(power settings to ONLY turn off the monitor) in either Ubuntu or Windows 7 it decides that it didn't want to use AC power anymore and would just start draining the battery until it died. Now, suddenly, it won't charge at all. The capacity was great up to this point which happened in an instant. It will recognize the battery but won't see the AC power if plugged in while the battery is in. I can power up the laptop without the battery and it works fine. If I plug in the battery while powered up it will claim it's charging it, but it stays at the same percentage. If I unplug the power, it will switch over to Battery fine, but I have to power down and unplug the battery to get it back on AC power. I've had dying/dead batteries before but they typically won't hold a full charge anymore but it still winds up to 100% then drops quickly when unplugged. This seems more like a chip problem in the battery to me, but I'm not sure. Any ideas?

  Read the article

• Ram question in VMware Server 2

  - by ToreTrygg

  Hi, I understand from the VMware Server 2 documentation that VMware Server 2 is capable of running a 64-bit guest OS underneath a 32-bit host OS, as long as the hardware running the box is 64-bit capable. Here's my situation. We currently have an underutilized XEON X3220 Quad Core 64bit Server, running Server 2003, 32-bit and 2gb of RAM (the motherboard is capable of 8gb ram). The server is currently used mainly for file and print services. It is also running Active Directory, Novell eDirectory and Groupwise 6.5. We are planning a micration to Microsoft Exchange, so the Novell eDirectory and Groupwise services will eventually be purged from this box, leaving only Active Directory, File and Print services. Being that this server is underutilized we are hoping to save hardware costs and virtualize our new Exchange investment. My question is this. Will VMware allow access to the "invisible" extra memory that Windows 32-bit won't see. Meaning, if we increase the full amount of system ram to 8gb (yes, I know the 32-bit host OS will only see a maximum of 4gb), will I be able to assign maybe 5gb to the new Server 2008 64-bit OS running Exchange and leave 3gb for the Guest OS (or maybe even a 6, 2 split). The second part of that would be, would it be better to just convert the main OS currently running to an image, convert the machine itself to ESXi and run both OSes as images under ESXi. Downtime for this box is critical, so my preference is most definitly with the first option because it presents very minimal downtime. Doing the second would make downtime quite a few hours to image the machine and then convert the image to a VMware Image.

  Read the article

• My system administrator set up 2 databases that sync. Master-Master. However, these two databases a

  - by Alex

  DB1 and DB2. I made changes to DB1, and it does not seem to be on DB2. When I do "SHOW SLAVE STATUS\G" on DB2, there seems to be an error: mysql> show slave status\G *************************** 1. row *************************** Slave_IO_State: Waiting for master to send event Master_Host: Master_User: Master_Port: Connect_Retry: 60 Master_Log_File: mysql-bin.0005496 Read_Master_Log_Pos: 5445649315 Relay_Log_File: mysqld-relay-bin.0041705 Relay_Log_Pos: 1624302119 Relay_Master_Log_File: mysql-bin.0004461 Slave_IO_Running: Yes Slave_SQL_Running: No Replicate_Do_DB: Replicate_Ignore_DB: Replicate_Do_Table: Replicate_Ignore_Table: Replicate_Wild_Do_Table: Replicate_Wild_Ignore_Table: Last_Errno: 1062 Last_Error: Error 'Duplicate entry '4779' for key 1' on query. Default database: 'falc'. Query: 'INSERT INTO `log` (`anon_id`, `created_at`, `query`, `episode_url`, `detail_id`, `ip`) VALUES ('fdzn1d45kMavF4qbyePv', '2009-11-19 04:19:13', 'amazon', '', '', '130.126.40.57')' Skip_Counter: 0 Exec_Master_Log_Pos: 162301982 Relay_Log_Space: 136505187184 Until_Condition: None Until_Log_File: Until_Log_Pos: 0 Master_SSL_Allowed: No Master_SSL_CA_File: Master_SSL_CA_Path: Master_SSL_Cert: Master_SSL_Cipher: Master_SSL_Key: Seconds_Behind_Master: NULL 1 row in set (0.00 sec) Then, I did show tables, and it seems like DB2 is lacking a table that I created on DB1...that means that for some reason, DB2 stopped syncing with DB1. How can I simply allow them to be in full synchronization again? All I want is DB2 to be exactly the same as DB1!

  Read the article

• Weird mouse behaviour. Debian wheezy

  - by DevNoob

  When I move my mouse slowly over the desktop the pointer jumps often a few pixels (one or two) in the opposite direction of which I move my mouse. Horribly when trying to set the cursor around some semicolons in eclipse. I guess this is the result of a wrong set resolution of it. I suppose this is because the mouse was set initially really fast and even if I do xset 1/2 3, the mouse is just to fast and unprecise for me. It aready tried to configure the xorg.conf like this: Section "InputDevice" Identifier "Configured Mouse" Driver "mouse" Option "Device" "/dev/mouse" Option "Protocol" "Auto" Option "Name" "Logitech G3" Option "Resolution" "2000" EndSection But with no effect. Maybe because there is no /dev/mouse. This ist the content of dev. Maybe you can tell me which one is the mouse. autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency disk dvd dvdrw fd fd0 full fuse fw0 hidraw0 hidraw1 hpet input kmsg log loop0 loop1 loop2 loop3 loop4 loop5 loop6 loop7 loop-control MAKEDEV mapper mcelog mem net network_latency network_throughput null nvidia0 nvidiactl oldmem port ppp printer psaux ptmx pts random rfkill root rtc rtc0 sda sda1 sda2 sda3 sda5 sda6 sda7 sda8 sdb sdb1 sg0 sg1 sg2 shm snapshot snd sndstat sr0 stderr stdin stdout tty tty0 tty1 tty10 tty11 tty12 tty13 tty14 tty15 tty16 tty17 tty18 tty19 tty2 tty20 tty21 tty22 tty23 tty24 tty25 tty26 tty27 tty28 tty29 tty3 tty30 tty31 tty32 tty33 tty34 tty35 tty36 tty37 tty38 tty39 tty4 tty40 tty41 tty42 tty43 tty44 tty45 tty46 tty47 tty48 tty49 tty5 tty50 tty51 tty52 tty53 tty54 tty55 tty56 tty57 tty58 tty59 tty6 tty60 tty61 tty62 tty63 tty7 tty8 tty9 ttyS0 ttyS1 ttyS2 ttyS3 uinput urandom usb vcs vcs1 vcs2 vcs3 vcs4 vcs5 vcs6 vcs7 vcsa vcsa1 vcsa2 vcsa3 vcsa4 vcsa5 vcsa6 vcsa7 vga_arbiter vmci vmmon vmnet0 vmnet1 vmnet8 vsock watchdog xconsole zero So my question is: How do I setup my mouse correctly in Debian wheezy?

  Read the article

• Word 2007 won't run, tries to reinstall, fails with error 1402.

  - by eidylon

  Okay, this problem has been plaguing this computer for a while now. We tried googling, and none of the answers found helped to solve the problem. So, I am now posting the answer here for posterity. Office 2007 Home/Student edition was installed on the computer, running Vista (32-bit). One day, Word just up and stopped working. All the other programs continued to operate as expected. But every time you would click the icon for Word, it would pop up an install dialog, with a message reading "Preparing to install...". After a few minutes of the little progress bar going and going, it errors out, and gives error 1402, something to the effect of unable to access registry key HKEY_Local_Machine\Software\Classes\.wll\.... Searching around, every answer i found had to do with reassigning the permissions on this key, giving full rights to SYSTEM or to Everyone, and propagating the changes down to all sub-keys. When ever this was attempted though, it would tell us that we were unable to access the key due to permissions, even though we had run regedit as Administrator and are logged on with an administrative account. We also tried uninstalling Office and reinstalling it, as well as doing a repair install. Both these attempts also threw the same 1402 error. Also of note was that the executable for Word (winword.exe) was MIA and no longer to be found in the Office install directory.

  Read the article

• My PC is powercycling, what's going wrong?

  - by Renai

  So here is my sorry story of woe. My PC has been functioning normally for some time. Last week I bought a cheapish powered USB hub and plugged it into my home PC, which runs Windows 7. This weekend I plugged that hub into my home PC. At some stage I hibernated the PC. Then later on I plugged my Kobo eReader into the hub to charge. Later on I started the PC up. Only thing is, it now won’t start up. It just powercycles on for a second and a half with the fans at full, then powercycles off. Then back on for two seconds, then back off. There’s no display at all and it won’t get to the BIOS screen. It looks like anything USB is not functioning — the keyboard and mouse are not lighting up etc. I’ve taken out the BIOS battery and reseated the RAM, reseated the graphics card and so on, but my suspicion is that I have blown the USB section of the motherboard somehow. Suggestions? All else failing, where is the best place to take this machine in Sydney to get evaluated? It’s a fairly powerful beast, all up has cost me about $2500 over the years, including upgrades and a recent new graphics card, so can’t just start from scratch.

  Read the article

• Windows 2012 RDS Temporary profile for Administrator

  - by Fabio

  I've configured a Windows 2012 RDS Farm with two virtual servers (VMWare - each one on a different ESX server). Both servers have Licensing, Web Access, Gateway, Connection Broker and Session Host roles. High Availability is set up and it works fine. Remote Apps are working and even Windows XP clients have access to the web interface. User profile path is \vmfiles1\UserProfileDisks\App\ and almost everyone has full right access to it. The problem I have is that I would like to be able to access both servers at the same time with the Administrator account (console), but each time I try, the second server that I logon to give me access with a temporary profile. I tried to enable/disable multiple sessions per user and forced Admin logoff with the GPO but nothing changed. Another thing is that the server pool is not saved, so each time I restart the RDS server or I logoff from it, I have to add a server in the server manager. Do you have any idea? Sorry if my english is not perfect.

  Read the article

• How to configure a trusted connection between IIS 7 and SQL Server 2005?

  - by user1180652

  How do configure a trusted connection between IIS 7 and SQL Server 2005? My webapp was working fine with Windows Authentication enabled in IIS. Now, in order to solve a problem, we need to use a trusted connection. Unfortunately, enabling the trusted connection in the web.config broke the webapp. Oddly enough, when I run this application with trusted connection from my local dev machine (using the Cassini web server) IIS (Windows Server 2008) is running on one machine. The database (SQL Server 2005 but could migrate to 2008) is running on another machine. We are on a Windows domain running AD. All traffic is within our own firewall - no public access. Beyond that, I can't provide much info but I can find it. We're very "compartmentalized" (we have server people, security people, oracle people, SQL Server people, etc.) Thanks! Update 02/14/2012 0902: The webapp is now functional (app no longer broken) but the main issue is still unresolved. Now I have the app's application pool running as a domain account with permissions on the SQL Server box and IIS box. We were using this account to run the application but, and here's the problem, we need to log the real user name that made a change. When using the service account, the name of that service account appeared in the audit tables, making the auditing quite useless. So, not I'm at least running again. The connection string in the web.config is using "Trusted_Connection=True", the appPool is using a domain account with access to both boxes, BUT when I make a change (logged in as me) the name of the service account (appPool identity) is still logged in the audit tables. I also manually granted full permissions to the service account on the webapp folder. What do I need to do in order to log my name, not the service account, in the audit tables? Everything I'm reading says I need to establish a trusted connection between the two servers.

  Read the article

• Monitoring memcached with plink

  - by kojiro

  I need a telnet client that can take commands from a file or stdin so I can do some quick-and-dirty automatic monitoring of memcached. I thought plink would be good for this, but it seems to be doing something beyond what I need: If I telnet into localhost 11211 and write stats, I get the memcached stats, like so: $ telnet localhost 11211 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. stats STAT pid 25099 STAT uptime 91182 STAT time 1349191864 STAT version 1.4.5 STAT pointer_size 64 STAT rusage_user 3.570000 STAT rusage_system 2.740000 STAT curr_connections 5 STAT total_connections 23 STAT connection_structures 11 STAT cmd_get 0 STAT cmd_set 0 STAT cmd_flush 0 STAT get_hits 0 STAT get_misses 0 STAT delete_misses 0 STAT delete_hits 0 STAT incr_misses 0 STAT incr_hits 0 STAT decr_misses 0 STAT decr_hits 0 STAT cas_misses 0 STAT cas_hits 0 STAT cas_badval 0 STAT auth_cmds 0 STAT auth_errors 0 STAT bytes_read 82184 STAT bytes_written 7210 STAT limit_maxbytes 67108864 STAT accepting_conns 1 STAT listen_disabled_num 0 STAT threads 4 STAT conn_yields 0 STAT bytes 0 STAT curr_items 0 STAT total_items 0 STAT evictions 0 STAT reclaimed 0 END But with plink, I get an odd error. I'm using this command: watch -n 30 plink -v -telnet -P 11211 127.0.0.1 <<< $'\nstats' The first time through I get: Looking up host "127.0.0.1" Connecting to 127.0.0.1 port 11211 client: WILL NAWS client: WILL TSPEED client: WILL TTYPE client: WILL NEW_ENVIRON client: DO ECHO client: WILL SGA client: DO SGA ERROR STAT pid 25099 STAT uptime 91245 STAT time 1349191927 STAT version 1.4.5 … END But when watch repeats the command I just get: Looking up host "127.0.0.1" Connecting to 127.0.0.1 port 11211 client: WILL NAWS client: WILL TSPEED client: WILL TTYPE client: WILL NEW_ENVIRON client: DO ECHO client: WILL SGA client: DO SGA Failed to connect to 127.0.0.1: Connection reset by peer Connection reset by peer FATAL ERROR: Connection reset by peer What is plink doing here that is different from normal telnet? How should I be going about this? (I'm not married to plink, but I need a way to continuously send simple telnet commands to memcached without writing a full-fledged perl script.)

  Read the article

• Looking for "bitmap-vector" image editor

  - by Borek

  I used to use PhotoImpact which is no longer developed so I'm looking for a replacement. What made PhotoImpact great to me was the ability to work in both bitmap and vector modes. What I mean by that: I could have an image or screenshot and easily add arrows, text captions or shapes to it. These shapes were vector objects so I could come back to them later and amend their properties easily. Software I know of: Paint.NET is purely bitmap so please don't recommend it - layers are not enough for my needs Drawing tools in MS Office work pretty much the way I'd like - you can paste an image and then add vector objects on top of it. It just doesn't feel right to have the full-fidelity original images stored as .docx or .pptx (I don't fully trust Word/Powerpoint that they don't compress the image) I'm not sure about GIMP but if it's just "better Paint.NET" (i.e., layers but no vector objects) I'm not interested Photoshop is out of question purely because of its price tag Corel killed PhotoImpact because they already had a competing product (Paint Shop Pro) but AFAIK it lacks vector features. Any tips for PhotoImpact alternatives would be very welcome.

  Read the article

• What options to use for Accurate bacula backup?

  - by Kiss Stefan

  It's actually 2 question in one. First is a bit more theoretically. So when specifying accurate options how does bacula figure out if a file needs to be backed up ? it's a simple AND ? As in if the options are Accurate = sm5 bacula will not backup the file if ((size = old size) AND (modtime = old modtime) AND (md5 = old md5)) Is that correct ? Do any of the options take precedence ? as in would be a file skipped if modif time is diffreent but it has the same md5sum ? Are there any implied options that you cannot ignore ? Practical case, ( bacula 5.0.1 ) I have to back-up a svn repo, in order to be able to make incremental backups as simple as posible i am hotcopying (client run before) it to another location, that bacula will backup ( then delete it with client run after). Now in the fileset i have Accurate = spnd5 This should tell bacula to take into consideration size , permission bits number of links , decreases in size and md5sum. However , an incremental is also including a full copy of the svn. What am i doing wrong ? it seems that it takes into account creation time even tho i have not specified it.

  Read the article

• Enable gzip on Nginx

  - by Rob Wilkerson

  Yes, I know that there are a lot of other questions that seem exactly like this out there. I think I must've looked all of them. Twice. In desparation, I'm adding another in case my specific configuration is the issue. Bear with me. First, the question: What do I need to do to get gzip compression to work? I have an Ubuntu 12.04 server installed running nginx 1.1.19. Nginx was installed with the following packages: nginx nginx-common nginx-full The http block of my nginx.conf looks like this: http { include /etc/nginx/mime.types; access_log /var/log/nginx/access.log; sendfile on; keepalive_timeout 65; tcp_nodelay on; gzip on; gzip_disable "msie6"; include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; } Both PageSpeed and YSlow are reporting that I need to enable compression. I can see that the request headers indicate Accept-Encoding:gzip,deflate,sdch, but the response headers do not have the corollary Content-Encoding header. I've tried various other config values (gzip_vary on, gzip_http_version 1.0, etc.), but no joy. As far as I know, I can only assume that nginx was compiled with compression support, but if there's any way to verify that, I'd love to know. If anyone sees anything I'm missing or can suggest further debugging, please let me know. I'm no sysadmin and I'm new to Nginx so I've exhausted everything I can think of or have read. Thanks.

  Read the article

< Previous Page | 399 400 401 402 403 404 405 406 407 408 409 410  | Next Page >